HUB7i User Manual - Kansas Turnpike Authority
Contents
1. TB1 za Sealevel Systems Inc HUB7i User Manual Appendix Compliance Notices Federal Communications Commission Statement FCC This equipment has been tested and found to comply with limits for Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in such case the user will be required to correct the interference at the users expense EMC Directive Statement Products bearing the CE Label fulfill the requirements of the EMC directive 89 336 EEC and of the low voltage directive 73 23 EEC issued by the European Commission To obey these directives the following European standards must be met EN55022 Class A Limits and methods of measurement of radio interference characteristics of information technology equipment EN55024 Information technology equipment Immunity characteristics Limits and methods of measurement EN60950 IEC950 Safety of information technology equipment including electric2. Sealevel Systems Inc 3 HUB7i User Manual Hardware Description Optical Isolation To protect the host computer from voltage spikes power surges and ground loops the HUB7i and the included wall mount power supply provides 4000 VAC isolation on the upstream USB port With the optional medical grade power supply Item TR122 the isolation is increased to 5500 VAC Power is supplied to the hub via 2 1mm barrel connector on the rear of the device High Retention Type B USB Connector Ka d The upstream port integrates a high retention type B connector that prevents accidental disconnection of the USB cable Seven powered downstream USB ports provide 500mA per port Status LEDs EnaBLE aur extewr Status LEDs also included on the front of all SeaI O modules to indicate the following information ENABLE Yellow Indicates that the hub is successfully communicating with the host computer FAULT Red Lights when there is a problem with a downstream USB port Disconnect the USB peripherals from the hub one at a time until the issue is isolated EXT PWR Green Indicates that the hub is properly connected to an external power source Sealevel Systems Inc 4 HUB7i User Manual Technical Specifications Power Requirements Power is supplied to hub via a 2 1mm barrel connector on the rear of the device m 5VDC 4000 VAC Isolation 5VDC 5A 5500 VAC Isola
3. Sealevel Systems maintains a website on the Internet Our homepage address is http www sealevel com The latest software updates and newest manuals are available via our FTP site that can be accessed from our home page Manuals and software can also be downloaded from the product page for your device Sealevel Systems provides an FAQ section on our website Please refer to this to answer many common questions This section can be found at http www sealevel com faq asp Technical support is available Monday to Friday from 8 00 AM to 5 00 PM eastern time Technical support can be reached at 864 843 4343 Email support sealevel com RETURN AUTHORIZATION MUST BE OBTAINED FROM SEALEVEL SYSTEMS BEFORE RETURNED MERCHANDISE WILL BE ACCEPTED AUTHORIZATION CAN BE OBTAINED BY CALLING SEALEVEL SYSTEMS AND REQUESTING A RETURN MERCHANDISE AUTHORIZATION RMA NUMBER Sealevel Systems Inc 7 HUB7i User Manual Appendix Silk Screen HUB7i PCB E RoHS Non RoHS 279 REV COPYRIGHT 2006 MADE IN USA L1 ca O a i Mm oH B ol oll B N N N n 5 es of Bol ol lt amp 3 i 5 lt ol an cH 28 OM OM
4. service mark trademark or registered trademark of the respective company Sealevel Systems Inc 10 HUB7i User Manual
5. HUB7i User Manual Isolated 7 Port USB Hub SYSTEMS INCORPORATED www sealevel com PO Box 830 Liberty SC 29657 864 843 4343 Table of Contents INTRODUCTION dowvabivessicsscapwsassvindsewiesonveasoesoesbsesocisapanseesseanesstiy 1 BEA TURES 1 BEFORE GET STARTED ele 2 et ee 2 OPTION ALT TEMS 2 ENS DAL LAI ELON sscsssevscesussdaasisvssesvscsssstasnsuvseedgvekasdesessecesevuvesssiuen seesuses sucstssvudonssvved S Etse a 3 WINDOWS 98 ME 2000 XP VISTA OPERATING 8 3 BSI SWPP OR Dress ct ae deine Grasse ence dasa 3 HARDWARE DESCRIPTION scsdicsctsdescesiis tie lees oo dibes datonscbussluatdcacdddcts ddeadinsttaveddssceceeseadebsedaceonst 4 TECHNICAL SPECIFICATIONS sssescsssseccosossosocsosescocesescosossosoccosessosesescosossosossosescosssescossseesoe 5 APPENDIX TROUBLESHOOTING sessescssossesocsossesecsssseseossssossossesocsossessossssossossesocsossese 6 APPENDIX B HOW TO GET ASSISTANCE ssesesccsesccsssscsscssesossossesocsossesoossesossossesocsosooss 7 APPENDIX C SILK SCREEN HUB7I PCB 0 sccssssscssscssccessceccsescsecssccsesssessscssecssessscees 8 APPENDIX D COMPLIANCE NOTICES 9 FEDERAL COMMUNICATIONS COMMISSION STATEMENT 9 WARRANTY
6. ON OM OH 3 nili oll 2 E gt ou a E S be 23 DE on D n gE oE oll Ob tE _ so o 5 ol 2 of 2B OM lt 8 ofl ofl 2 of a TRE oll ol gif D 1 oe Sm 8 8 n 2 5 i ri nil Sm iM F a 5 EE 5 g W Sa O 8 5 o mm i f a za coe MIMI 2 p e gt m Boo 5 E cm m ae t g 8 gt m i usi CELE 4 a o 7 gt _ X 5 8 EE mte Bai Bal kai 5 of Ill ce VW a is ia SS 1 gt T 258 3 x R6 R26
7. al business equipment Warning This is a Class A Product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures to prevent or correct the interference Always use cabling provided with this product if possible If no cable is provided or if an alternate cable is required use high quality shielded cabling to maintain compliance with FCC EMC directives Sealevel Systems Inc 9 HUB7i User Manual Warranty WARRANTY Trademarks Sealevel s commitment to providing the best I O solutions is reflected in the Lifetime Warranty that is standard on all Sealevel manufactured products We are able to offer this warranty due to our control of manufacturing quality and the historically high reliability of our products in the field Sealevel products are designed and manufactured at its Liberty South Carolina facility allowing direct control over product development production burn in and testing Sealevel Systems Inc hereafter Sealevel warrants that the Product shall conform to and perform in accordance with published technical specifications and shall be free of defects in materials and workmanship for life In the event of failure Sealevel will repair or replace the product at Sealevel s sole discretion Failures resulting from misapplication or misuse of the Product failure to adhere to any specifications or instructions or failure res
8. al grade power supply High retention USB type B connector prevents accidental disconnection of USB cable Includes seven powered downstream USB ports with 500mA available per port Status LEDs indicate external power connection to host and fault conditions USB 1 1 compliant and 2 0 compatible Housed in rugged attractive plastic enclosure Up to 5500 VAC Optical Isolation on USB Upstream Port Sealevel Systems Inc 1 HUB7i User Manual Before You Get Started What s Included The is shipped with the following items If any of these items is missing damaged please contact Sealevel for replacement Optional Sealevel 7 Port Isolated USB Hub 179 72 USB A to Device Cable a TR124 5VDC 4A Wall Mount Power Supply Sealevel Software CD Manual Only Items Depending upon your application you are likely to find one or more of the following items useful with All items can be purchased from our website http www sealevel com or by calling 864 843 4343 5VDC 5A Wall Mount Power Supply Item TR122 For medical and other specialized applications this medical grade power supply increases the isolation to 5500 VAC providing the highest level of protection in the industry USB Type A to USB Type A 3 Meter Extension Cable Item CA214 The CA214 is a fully rated USB extension cable that adds three meters to any existing USB cable maximum 5 met
9. ers The CA214 has a type A male connector on one end and a type A female connector on the other end USB Type A to USB Type B 5 Meter Device Cable Item CA215 The CA215 is a fully rated 5 meter device cable that connects USB peripherals with a type B connector to the type A connector on a host PC This cable provides the maximum 5 meters 16 feet for a USB connection Sealevel Systems Inc 2 HUB7i User Manual Installation Windows 98 ME 2000 XP Vista Operating Systems 1 The 15 fully supported as a generic USB hub device in Windows 98 ME 2000 XP Vista operating systems and requires no separate driver The Sealevel Software CD is included only for distribution of the user manual and other literature 2 Simply connect the included wall mount power supply to the HUB7i and then connect to an AC outlet 3 Using the included USB device cable plug the HUB7i into an available USB port on your host system 4 The Found New Hardware screen will appear and the hub will be automatically recognized as a generic USB hub device 5 The hub is ready to use when you see the screen Your USB hub is installed and ready to use NOTE i Windows NT is not USB aware and thus cannot support this device Linux Support USB devices are supported in Linux kernel v2 4 or better Refer to the help files included with your Linux distribution for specific instructions on adding generic USB hub devices
10. hub is supported in any USB aware operating system that supports generic USB hub devices including Windows 98 ME 2000 XP Vista operating systems and Linux kernel v2 4 or better No additional drivers are required Verify that USB support is enabled in the host system BIOS and the hub is functioning properly in the operating system You can verify the hub is working properly in Windows using Device Manager If the red LED lights there is a fault condition with one of the downstream USB ports Disconnect your USB peripherals one at a time until the red LED goes out Inspect the problem USB peripheral and replace if necessary Try connecting a different USB peripheral to the problem port If the red LED lights on the same USB port with a different device contact technical support for further assistance If these steps do not solve your problem please call Sealevel Systems Technical Support 864 843 4343 Our technical support is free and available from 8 00 AM to 5 00 PM Eastern Time Monday through Friday For email support contact support sealevel com Sealevel Systems Inc 6 HUB7i User Manual Appendix How Get Assistance Begin by reading through the Trouble Shooting Guide in Appendix A If assistance is still needed please see below When calling for technical assistance please have your user manual and current device settings ready If possible please have the device installed and ready to run diagnostics
11. so igicsadavssucsecagietesieteecsdevvved sssvin sedesesel sents tescodvvetied dvevesscksesedsadetedvaseadsosetssssevecssuvessensseee 10 Sealevel Systems Inc 519178 Revision 4 2007 HUB7i User Manual Introduction Features Once associated only with desktop peripherals USB I O devices are now commonly found in industrial and OEM applications The voltage spikes power surges and ground loops that affect traditional serial interfaces also affect USB devices Sealevel s is an optically isolated USB hub that connects up to seven USB peripherals and protects the host computer from voltages up to 5500 VAC The is powered by an industrial grade wall mount power supply that provides up to 4000 VAC isolation For medical and other specialized applications an optional medical grade power supply is available that increases the isolation to 5500 VAC which offers the highest level of protection available from any USB hub manufacturer Status LEDs on the HUB7i indicate external power connection to the host and fault conditions The hub is housed in a rugged plastic enclosure and is USB 1 1 compliant and USB 2 0 compatible The HUB7i integrates a high retention USB type connector that prevents accidental disconnection of the USB cable while the seven type A connectors provide a full 5 00mA to each attached USB peripheral m Provides 4000 VAC isolation on upstream USB port Optional 5500 VAC isolation with optional medic
12. tion 5500 VAC isolation with optional medical grade power supply Item 122 Dimensions L W H 9 2 9 37 1 7 23 32cm 13 34cm 4 25cm Environmental Specifications Specification Operating Storage Temperature Range 0 C 70 50 C 105 C 32 F 158 F 58 F 221 F Humidity Range 10 to 90 R H 10 to 90 R H Non Condensing Non Condensing Manufacturing All Sealevel Systems Printed Circuit boards are built to UL 94V0 rating and are 100 electrically tested These printed circuit boards are solder mask over bare copper or solder mask over tin nickel Sealevel Systems Inc HUB7i User Manual Appendix Troubleshooting The is a generic USB hub and should provide years of trouble free service Should the device appear to not be functioning correctly the following tips can eliminate most common problems without the need to call Technical Support 1 Make sure the power supply is connected to the hub and to a live AC power outlet The green LED on the front of the unit will light indicating the hub is properly powered Inspect the power supply or call for a replacement if the green LED does not light after connecting to power Make sure the hub is connected to a USB port using the included USB cable or a quality replacement USB cable The yellow LED will light when the hub is successfully communicating with the host system The
13. ulting from neglect or abuse are not covered under this warranty Warranty service is obtained by delivering the Product to Sealevel and providing proof of purchase Return authorization must be obtained from Sealevel Systems before returned merchandise will be accepted Authorization is obtained by calling Sealevel Systems and requesting a Return Merchandise Authorization RMA number The Customer agrees to insure the Product or assume the risk of loss or damage in transit to prepay shipping charges to Sealevel and to use the original shipping container or equivalent Warranty is valid only for original purchaser and is not transferable Sealevel Systems assumes no liability for any damages lost profits lost savings or any other incidental or consequential damage resulting from the use misuse of or inability to use this product Sealevel Systems will not be liable for any claim made by any other related party This warranty applies to Sealevel manufactured Product Product purchased through Sealevel but manufactured by a third party will retain the original manufacturer s warranty Sealevel Systems Incorporated 2779 Greenville Highway P O Box 830 Liberty SC 29657 USA 864 843 4343 FAX 864 843 3067 www sealevel com email support sealevel com Technical Support is available Monday Friday from 8 a m to 5 p m Eastern time Sealevel Systems Incorporated acknowledges that all trademarks referenced in this manual are the
Download Pdf Manuals
Related Search