caution - Epson America, Inc.
Contents
1. The rewinder available for this product is Model TU RC7508 For details about how to install the rewinder refer to the manual supplied with the rewinder 31 Appendix Downloading Drivers Utilities and Manuals Printer drivers utilities and manuals can be downloaded from one of the following URLs For customers in North America go to the following web site http www epsonexpert com For customers in other countries go to the following web site https download epson biz com service pos Open Source Software License This product uses open source software in addition to the software for which Epson is licensed Information related to the open source software used for this product is available from the following URLs Open source software list http xxx xxx xxx xxx OSS copy html Complete text of license agreement _http xxx xxx xxx xxx OSS licenseterm html XXX XXX XXX XXX represents the IP address of the printer Restriction of Use When this product is used for applications requiring high reliability safety such as transportation devices related to aviation rail marine automotive etc disaster prevention devices various safety devices etc or functional precision devices etc you should use this product only after giving consideration to including fail safes and redundancies into your design to maintain safety and total system reliability Because this product was not intended for use in applications re2. After cutting the printed paper using the Cut button hold down the Back Feed button to feed the paper backward so that you can pull out the paper Ink LED Flashes in the following conditions e Ink is low e The maintenance box is nearly full Lights in the following conditions e The ink cartridge cover maintenance box cover is open e No ink cartridge maintenance box is set e It is time to replace the ink cartridge e It is time to replace the maintenance box 10 Paper LED Lights when the printer has no paper or jammed paper or when the Paper Set Cover the Roll Paper Cover or the Front Cover is open 11 Pause LED Lights Flashes while the printer is paused lt gt Status Pause LED is on flashing in amber on page 25 12 Status LED Lights Flashes in blue when the printer is operating properly Lights Flashes in amber when the printer has an error Status Pause LED is on flashing in amber on page 25 13 Power LED Lights when the printer is powered on Flashes during printing or ink charging Rear Side N D wm 1 USB Connector For connecting a USB cable 2 Ethernet Connector For connecting a LAN cable 3 AC Inlet For connecting a power cable 4 Wire Saddle Pass the USB cable through this
3. D U E ink 1 Il Pause if Back Feed 2 io pei Ug Feed pe 1 LCD Displays the menus and messages 2 Pause Button Press this button during printing to pause printing after one page of data is printed Press this button while the printer is paused while the Pause LED is on to resume printer operation and have the printer return to the print standby status 3 Cancel Button Press this button for less than three seconds while the printer is paused while the Pause LED is on to cancel the first print job Press this button for three seconds or more to cancel all the print jobs The printer returns to the print standby status if the button is pressed while a menu is being executed 4 Q Power Button Turns on off the printer 2 Turning On Off on page 10 5 Selection Setting Button Use this button to select set the menus and items displayed on the LCD p Menu Button Displays the menu screen lt q Button Displays the previous menu A y Button Use this button to select menus and items OK Button Executes the selected menu and item Cut Button Cuts the paper Feed Button Press this button for less than three seconds to feed one page of paper Press this button for three seconds or more to feed the paper continuously Back Feed Button Press this button only when replacing paper
4. Test Printing Nozzle Check Printing You can check whether the printer is operating normally by printing the nozzle check pattern Perform nozzle check printing by following the steps below You can use nozzle check to check whether the nozzle is clogged from the printed pattern Make sure that the printer is powered on 7 Turning On on page 10 P gt Press Menu button to display the menu Select NOZZLE CHECK and press the OK button Select YES and press the OK button The nozzle check pattern is printed BR WW N Fe 5 Check the printed nozzle check pattern If the pattern is printed normally all the lines are printed properly as shown in the left figure below The nozzle is clogged if there is an unprinted line as shown in the right figure below Perform head cleaning if this occurs For details about head cleaning refer to Technical Reference Guide lt Normal gt lt Clogged Nozzle gt 21 Setting the IP Address Set the IP address of the product by following the steps below Make sure that the printer is powered on lt gt Turning On on page 10 P gt Press Menu button to display the menu Select I F SETUP and press the OK button Select NETWORK SETUP and press the OK button Select IP ADDRESS and press the OK button Enter the IP address nH oO A WD N FE A y Use the button to select a number and the lt Q P gt buttons to select the digit to be changed g
5. by ignoring this symbol can lead to injury and property damage Notes Indicates supplementary notes and other useful information Cautions on Installation A WARNING L Do not block the air vents of this product Doing so can result in heat accumulated in the product causing a fire 27 Rear Side on page 9 L Do not cover the product with a cloth or install it in a poorly ventilated location Make sure to allow installation space as specified in this manual lt Location Appropriate for Installation on page 11 A CAUTION L Do not install store the product in an unstable location or in a location subject to vibration from other devices Equipment may fall or collapse causing breakage and possible injury L Do notinstall the product in a location exposed to oily smoke or dust or in a humid location Doing so may cause electric shock or fire L Use a natural posture when lifting this product Lifting the product in an inappropriate posture may cause injury L Do not carry this product alone Two or more people are required while unpacking or moving the product The weight of this product is approximately 37 kg 81 57 lb 27 Specification on page 29 L Hold the parts of the product specified in this manual when lifting up this product Otherwise the product may fall or your finger may be caught when you lower the product resulting in injury lt 9 Installing the Printer on page 11 Cautions on Power Sup
6. saddle to prevent disconnection of the USB cable 5 Air Vent Exhausts heat generated in the product to prevent an internal temperature rise Allow a clearance of 10 cm 3 94 or more from the air vent to ensure ventilation when installing the product O R Basic Operation Turning On Off This section describes how to turn on off the product Turning On d Press Power button D Power LED lights up and the power turns on Turning Off d Hold down Power button for one second or more D Power LED turns off and the power turns off 10 Setup Removing the Protective Tape Protective tape is applied for protection against shock during transportation Remove the tape before installation Notes The protective tape and packaging box will be required for future transportation Keep them in a safe place Installing the Printer Secure sufficient space in a location appropriate for installation caution L Two people are required to lift up this product L The weight of this product is approximately 37 kg 81 57 Ib When lifting up this product place the product between two people as shown in the figure below and hold the recessed areas on both sides of the product Carrying the product by holding other areas may damage the product When placing the product on the floor be careful not to get your fingers caught between the product and the installation surface Lift up thi
7. steps below 1 Make sure that the printer is powered off lt 2 Turning Off on page 10 2 Open the paper set cover 25 O 3 Pull the front cover open lever at the paper feed slot 4 Open the front cover Front Cover Open Lever 26 O 5 Cut the jammed paper and remove it A WARNING Do not touch the metal wheels Doing so may cause injury 6 Pull out the paper from the paper feed slot 27 O sF 7 Close the front cover 8 Set the paper again F Setting the Roll Paper on page 15 28 Specification Item Printing method Specification Line ink jet dot matrix Four color printing Paper feed Forward and reverse friction feed Paper Category Plain Plain label Matte Matte label Synthetic label Glossy label Type Continuous paper with black marks Label roll paper with black marks Die cut label paper with without black marks Form Roll paper fanfold paper Ink cartridge Model SJIC26P C M Y K Maintenance Box Model SJMB7500 Interface Ethernet x1 10BASE T 100BASE T X 1000BASE T USB x1 USB 2 0 High speed Type B Power supply AC 100 240 V 50 60 Hz Consumption current Average 1 0A Temperature and humidity Environment guaranteed for operation Operating 5 to 35 C 41 to 95 F 20 to 80 RH No condensation Environment guaranteed for printing Environment for transportation packed
8. EPSON EXCEED YOUR VISION TM C7500 Setup Guide eera T e E E E E ewes 2 Part Names and Functions 0ce cece ences 6 Basic ODEallOn 44c ccssesus sees erinan enea 10 SEUD e e e E E E unease 11 Setting the Printer ceessrererereresiarrsasr idrar isisi 23 Troubleshooting sisisresirirsrirrricsrerscrccires 25 Specification ssueususususerererenenerserene 29 Consumable Products and Options 30 APPENAIX edn a s dean ah 01634459550 a eek eka danndens 32 M00079300EN Before use This manual describes the setup operations for this product from installation to the print standby status Please read this manual carefully before using this product For details about the functions and operation procedure of this product and software maintenance information and troubleshooting refer to Technical Reference Guide You can also set up this product easily by using the Install Navi Safety Precautions The symbols shown below are used in this manual in order to ensure safety and proper use of this product and to prevent danger to customers and other persons and property damage The symbols indicate the precaution levels as described below Be sure that you completely understand their meaning before reading this manual A WARNING Handling the product improperly by ignoring this symbol can lead to death or serious injury A caution Handling the product improperly
9. French e German e Dutch o Italian e Spanish e Portuguese 6 Press the OK button This completes language setting Notes For details about other settings refer to Technical Reference Guide 24 Troubleshooting Power is not turned on LED is not turned on Check that the power cable is properly connected 7 Connecting the Power Cable on page 12 Status Pause LED is on flashing in amber L Check that all the covers are securely closed lt 3 Front Side on page 6 L Check that the paper is set properly and that the printer has sufficient roll paper ZF Setting the Roll Paper on page 15 L Check that no paper is jammed Remove jammed paper if any 7 Paper is jammed on page 25 L Check that the ink cartridge is set properly and if it is time to replace the ink cartridge 7 Installing the Ink Cartridge on page 13 Ink cartridge on page 30 1 Check that the maintenance box is set properly and if it is time to replace the maintenance box lt 3 Maintenance Box on page 30 L Printer operation is paused when only the Pause LED lights in amber Press the Pause button to restore the printer to the print standby status lt 2 Operation Panel on page 7 L In other cases power off the printer wait for 10 seconds or more and then power on the printer again F Turning On Off on page 10 Paper is jammed Do not forcibly pull out paper that is jammed but rather remove it by following the
10. Operating 15 to 35 C 59 to 95 F 20 to 80 RH No condensation Operating 20 to 60 C 4 to 140 F 5 to 85 RH No condensation At 40 C 104 F up to 1 month At 60 C 140 F up to 120 hours Environment for storage unpacked Operating 20 to 40 C 4 to 104 F 5 to 85 RH No condensation At 40 C 104 F up to 1 month Mass Overall dimensions W x D x H 392 x 598 x 395 mm 15 43 x 23 54 x 15 55 The protrusion excluded Approximately 37 0 kg 81 57 Ib Not including the ink cartridge maintenance box and roll paper According to Epson s operating conditions 29 Consumable Products and Options The consumable products and options for this product are available Those products can be purchased from the sales representatives For details visit the following URLs For customers in North America go to the following web site http www epsonexpert com For customers in other countries go to the following web site http www epson com Ink cartridge Four colors of ink cartridge are used The ink cartridge available for this product is Model SJIC26P K C M Y The LCD indicates REPLACE INK when it is time to replace the ink cartridge Installing the Ink Cartridge on page 13 Genuine Ink Cartridge Recommended 1 For the best performance of the printer it is recommended to use genuine Epson ink cartridges Use of non genuine Epson ink cartridges can
11. able products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation 32 Trademarks EPSON is a registered trademark of Seiko Epson Corporation Exceed Your Vision is a registered trademark or trademark of Seiko Epson Corporation All other trademarks are the property of their respective owners and used for identification purpose only Product information is subject to change without due notice 2014 Seiko Epson Corporation All rights reserved 33
12. adversely affect the printing quality and prevent the printer from realizing its maximum performance Epson cannot guarantee the quality and reliability of non genuine Epson products Repairs for any damage or breakdown of this product due to the use of non genuine Epson products will not be free of charge even if the warranty period is still valid 1 Color adjustment of the product is based on the use of genuine Epson ink cartridges Use of non genuine ink cartridges may result in reduced print quality Epson recommends the use of genuine Epson ink cartridges Maintenance Box The maintenance box is a box used to collect waste ink The maintenance box available for this product is Model SJMB7500 The LCD indicates REPLACE M B when it is time to replace the maintenance box For details about how to replace the maintenance box refer to the manual supplied with the maintenance box Genuine Maintenance Box Recommended It is recommended to use a genuine Epson maintenance box in order to ensure optimal printer operation Use of non genuine Epson maintenance boxes can prevent the printer from optimal operation Repairs for any damage or breakdown of this product due to the use of non genuine Epson products will not be free of charge even if the warranty period is still valid Epson cannot guarantee the quality and reliability of non genuine Epson products 30 Rewinder The rewinder is a device used to rewind the printed paper into a roll form
13. ag re 3 wy a a lt ok 192 168 192 168 y 5 o E 7 Press the OK button This completes IP address setting Notes For details about other network connection settings refer to Technical Reference Guide This is the end of the printer setup procedures 22 Setting the Printer You can specify various settings for the printer from the menu screen This section describes the procedure for specifying basic settings Time Setting Set the current date and time by following the steps below 1 Make sure that the printer is powered on lt gt Turning On on page 10 2 P gt Press Menu button to display the menu 3 Select PRINTER SETUP3 and press the OK button 4 Select CLOCK and press the OK button 5 Enter the current date and time A y Use the button to select a number and the lt Q P gt buttons to select the item to be changed Urs MM DD YY HH MM 6 Press the OK button This completes time setting 23 Language Setting Set the language used for the messages displayed on the LCD by following the steps below 1 Make sure that the printer is powered on Turning On on page 10 2 P gt Press the Menu button to display the menu 3 Select PRINTER SETUP3 and press the OK button 4 Select LANGUAGE and press the OK button 5 Select the language to be used The following languages are available e Japanese e English e
14. cartridge label and of the ink cartridge holder label and set the cartridges to each matching color P 5 Close the ink cartridge cover Ink charging starts The D Power LED flashes during ink charging Notes The ink cartridge included in the product package is used for initial charging The printer uses ink to prepare for printing ink charging when the ink cartridge is installed for the first time It takes at least 10 minutes to charge ink The ink charging time varies depending on the conditions 14 O EA A CAUTION Never open any cover on the product or turn off the product during ink charging while the D Power LED is flashing Doing so during ink charging will consume a large amount of ink which may require replacement ofthe ink cartridge before completion of charging 6 When ink charging completes the D Power LED changes from flashing to on 7 Press the Pause button Setting the Roll Paper Set the roll paper by following the steps below 1 Make sure that the printer is powered on Turning On on page 10 2 Open the paper set cover 15 O sF 3 Open the roll paper cover 4 Pull out the roll paper flange while holding the release lever of the roll paper flange between your fingers Release Lever Roll Paper Flange 5 Attach the roll paper to the spindle and push the core of the roll paper as far as possible so that it is securely fit it into place Spi
15. he steps below warnine L Use only AC 100 V for the power supply Using other type of power supply may cause electric shock or fire LI Be sure to install this product in the vicinity of a power outlet so that you can immediately unplug the product if some fault or other problem occurs 1 Make sure that the printer is powered off lt 2 Turning Off on page 10 2 Insert the power cable connector into the AC inlet on the product securely to the bottom 3 Fully insert the power plug securely into the outlet 12 Connecting the Interface Cable Connect the interface cable to be used to the connector on the rear side of the printer 7 Rear Side on page 9 A CAUTION When using a USB cable pass the cable through the wire saddle to prevent accidental disconnection Wire Saddle Installing the Ink Cartridge Install the ink cartridge by following the steps below Z caution Read the handling instructions carefully before installing the ink cartridge 27 Cautions on the Ink Cartridge on page 4 Ink cartridge on page 30 1 Turn on the printer Turning On on page 10 2 Open the ink cartridge cover 13 O FS oo 3 Shake the ink cartridge package four or five times before opening it 4 Push all the ink cartridges of the four colors gently into the product until they click in place Check the color of the ink
16. n immediately wash the area with soap and water e When ink gets into your eyes immediately flush them with water Leaving the ink as is may result in bloodshot eyes or mild inflammation If something is wrong immediately consult with a doctor e When ink gets into your mouth immediately spit it and consult with a doctor LI There may be some ink around the ink supply port on the removed ink cartridge Take care so that it does not stain the desk or other surface L Do not remove the ink cartridge except when you replace it L Do not open the ink cartridge package until you are ready to install it in the product L Do not shake the ink cartridge too hard The ink cartridge may leak if you shake it around too much or push the sides strongly L Do not allow foreign objects to fall into the cartridge installation section Doing so may cause printing malfunction Remove any object that might have fallen into the installation section taking care not to damage the section LI When ink is charged for the first time right after purchase ink is consumed for filling the print head nozzle ink discharge holes to get ready for printing That is why the number of the printable sheets may be fewer than for the cartridges to be installed later L Ifyou turn the power off the product using the power button the print head is automatically capped which prevents the ink from drying After installing the ink cartridges be sure to turn the power
17. ndle 16 O FS 6 Pull out the end of roll paper 7 Attach the roll paper flange to the spindle while holding the release lever of the roll paper flange between your fingers Push the flange to the bottom to align it with the roll paper width Release Lever Roll Paper Flange 17 O sF 8 Open the paper hold inside the paper set cover Paper Hold 9 Insert the paper along the paper guide a Align the end of the paper with mark p gt Mark Paper Guide a 18 10 Move the paper guide b to align it with the paper width while pushing the paper guide b lever Paper may become jammed if the position of the paper guide b is not aligned with the paper width Adjust the paper guide b in accordance with the paper width 11 Insert the end of the paper into the paper feed slot The paper starts to feed automatically after a certain amount is inserted The Paper LED turns off when the paper is set properly If the Paper LED stays on the paper is not set properly Set the paper again Paper Feed Slot 19 O sF 12 Close the paper hold Paper Hold 13 If the paper is loose turn the roll paper flange in the direction of the arrow to tighten the paper 14 Close the roll paper cover 20 15 Close the paper set cover 16 Press the Pause button
18. off using the power button when you are not using the product Do not pull out the power plug or trip the breaker while the power is on Printing on water repellent paper such as art paper which is slow drying may cause print stains Also printing on glossy paper may cause finger prints on the paper or ink may adhere to your fingers when you touch it Select paper not to case print stains before use Caution Label The caution label on the product indicates the following precaution A CAUTION Take care not to injure your fingers on the fixed blade of the autocutter Part Names and Functions Front Side Ink Cartridge Cover Open this cover to install replace the ink cartridge Installing the Ink Cartridge on page 13 2 Front Cover Open this cover to remove jammed paper 7 Paper is jammed on page 25 3 Rewinder Connection Cover Open this cover to install the rewinder option lt 2 Rewinder on page 31 4 Maintenance Box Cover Open this cover to install replace the maintenance box 5 Roll Paper Cover Open this cover to set roll paper 7 Setting the Roll Paper on page 15 6 Paper Set Cover Open this cover to set roll paper or fanfold paper ZF Setting the Roll Paper on page 15 For details about how to set fanfold paper refer to Technical Reference Guide Operation Panel 13 9 n E
19. page 13 LI Do not touch the areas inside the product other than those mentioned in this manual Doing so may cause electric shock or burns L Do not insert metal or flammable materials or allow them to fall into the product Doing so may cause electric shock or fire A CAUTION L Do not allow anyone to stand or place heavy objects on top of this product Equipment may fall or collapse causing breakage and possible injury L Install the cables and optional products in the proper direction according to the proper procedures Failure to install correctly may cause fire or injury Follow the instructions in this manual to install them properly 27 Connecting the Power Cable on page 12 Connecting the Interface Cable on page 13 Before moving the product shut down and unplug the product and make sure that all the cables are disconnected Failure to do so may damage a cable causing electric shock or fire L Do not store or transport the product in a tilted standing or upside down position Doing so may cause the ink to leak Cautions on the Ink Cartridge A CAUTION LI Do not touch the IC chip on the cartridge Doing so may cause operating printing malfunction L This product uses ink cartridges equipped with an IC chip that monitors the amount of ink used by each cartridge Cartridges are usable even if they are removed and reinstalled However if an ink cartridge in which little amount of ink remains is removed and rein
20. ply A WARNING L Use only AC 100 V for power supply Using other type of power supply may cause electric shock or fire LI Do not allow dust or foreign materials to adhere to the power plug Accumulated dust or foreign material may cause electric shock or fire LI Insert the power plug securely into the socket Failure to insert the plug securely may cause electric shock or fire L Use only the power cable supplied with this product In addition use the supplied power cable only for this product Other use may cause electric shock or fire LI Do not use a damaged power cable Doing so may cause electric shock or fire Contact a Seiko Epson service center for advice if the power cable is damaged Observe the following points so as not to damage the power cable Do not modify the power cable Do not place heavy objects on the power cable Do not forcibly bend twist or pull the power cable Do not locate the power plug near a heating device LI Do not hold the power plug with a wet hand Doing so may cause electric shock LI Do not connect too many power cables to one outlet Doing so may cause fire L Disconnect the power plug from the outlet on a periodical basis and clean the areas around and between the blades Leaving the power plug connected to the outlet for a long period of time may cause dust to accumulate on the blade root resulting in a short circuit or fire LI Hold the plug and do not pull the cable when di
21. quiring extremely high reliability safety such as aerospace equipment main communication equipment nuclear power control equipment or medical equipment related to direct medical care etc please make your own judgment on this product s suitability after a full evaluation Notes 1 All rights reserved No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written permission of Seiko Epson Corporation 2 The contents of this manual are subject to change without notice 3 While every precaution has been taken in the preparation of this manual Seiko Epson Corporation assumes no responsibility for errors or omissions 4 Neither is any liability assumed for damages resulting from the use of the information contained herein 5 Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages losses costs or expenses incurred by purchaser or third parties as a result of accident misuse or abuse of this product or unauthorized modifications repairs or alterations to this product or excluding the U S failure to strictly comply with Seiko Epson Corporation s operating and maintenance instructions 6 Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consum
22. s product in a natural posture for example bending your knees a sufficient amount Lifting the product in an inappropriate posture may cause injury to the worker or damage to the product L Do not tilt the product more than 10 degrees in any direction while carrying it Doing so may cause an accident L Do not place heavy objects on top of this product Excessive force applied to the product may cause a failure Location Appropriate for Installation Install this product in a location as follows I On a level and stable surface that can support the weight of the product approx 37 kg 81 57 Ib LI Onan area larger than the bottom surface of the product L In a well ventilated location with a clearance of 10 cm 3 94 or more from the air vent on the rear side of the product I In a location free of vibration and impacts 11 Ina location where a dedicated power outlet is available L In a location where you can set and remove paper without difficulty L In a location with sufficient space around the product to allow for installation of accessories replacement of consumable products and daily cleaning L In a location meeting the following conditions Temperature Operating 5 to 35 C 41 to 95 F Storage 20 to 40 C 4 to 104 F At 40 C 104 F up to 1 month Humidity Operating 20 to 80 RH Storage 5 to 85 RH No condensation Connecting the Power Cable Connect the power cable by following t
23. sconnecting the power plug from the outlet Pulling the cable may damage the cable or deform the plug causing electric shock or fire A CAUTION L To ensure safety unplug this product before leaving it unused for an extended period Cautions on Handling A WARNING L Do not use this product in a location with volatile substances such as alcohol or paint thinner or near fire Doing so may cause electric shock or fire LI Shut down the product immediately if it produces smoke a strange odor or unusual noise Continued use may cause electric shock or fire Immediately unplug the product when a fault or other problem occurs and contact your dealer or a Seiko Epson service center for advice L Shut down the product immediately if water or other liquid spills into this product Continued use may cause electric shock or fire Immediately unplug the product and contact your dealer ora Seiko Epson service center for advice LI Never disassemble or repair this product Tampering with this product may result in injury or fire L Do not use this product in an environment where inflammable gas or explosive gas may exist Do not use aerosol sprayers containing flammable gas inside or around this product Doing so may cause fire LI Do not connect cables in ways other than those mentioned in this manual Doing so may cause fire It may also damage other devices 27 Connecting the Power Cable on page 12 Connecting the Interface Cable on
24. stalled it may not be usable Some ink is consumed each time cartridges are installed because the product automatically checks their reliability LY Install all ink cartridges Printing is not possible even if only one ink cartridge is missing L Since ink cartridges are designed to stop the operation before ink runs out completely to maintain the quality of the print head some ink remains in the used ink cartridge L All the ink colors are consumed also for the maintenance operations when an ink cartridge is replaced and for print head cleaning LI Do not turn off the product or open the ink cartridge cover while charging ink D Power LED is flashing Opening the cover may cause the ink to be recharged resulting in more ink being consumed Also it may cause printing malfunction LI Even for monochrome printing printing of monochrome image all the ink colors are used in an operation designed to maintain the printing and print head quality L Do not disassemble the ink cartridge Doing so may cause ink to adhere eyes and skin LI Do not disassemble and remodel the ink cartridge Doing so may cause printing malfunction L Use of an old ink cartridge may result in reduced print quality Use it up within six months after opening the package The usage period for ink cartridges is printed on the packaging of individual ink cartridges L If ink contacts your skin eyes or mouth take the following actions e When it gets onto your ski
Download Pdf Manuals
Related Search