LED BEAM Moving Head 4in1 MH
Contents
1. 255 Reset after 3 seconds Never stand directly below the device when mounting removing or servicing the fixture from a periodic safety inspection of all installation material and the fixture If you lack these qualifications do not attempt the installation yourself Improper installation can result in bodily injury Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet Clamp Mounting The LEDBEAM 120F provides a unique mounting bracket assembly that integrates the bottom of the base the included Omega Bracket and the safety cable rigging point in one unit see the illustration below When mounting this fixture to truss be sure to secure an appropriately rated clamp to the included omega bracket using a M10 screw fitted through the center hole of the omega bracket As an added safety measure be sure to attached at least one properly rated safety cable to the fixture using on of the safety cable rigging point integrated in the base assembly Regardless of the rigging option you choose for your LEDBEAM 120F always be sure to secure your fixture with a safety cable The fixture provides a built in rigging point for a safety cable on the hanging bracket as illustrated above Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle 5 DMX 512 control connections Connect the provided XLR2. LED BEAM Moving Head 4int MH B7012 User Manual KEEP THIS MANUAL FOR FUTURE NEEDS 1 Unpacking Thank you for choosing LEDBEAM 120F For your own safety please read this manual before installing the device This manual covers the important information on installation and applications Please install and operate the fixture with following instructions Meanwhile please keep this manual well for future needs LEDBEAM 120F is made of a new type of high temperature strength of engineering plastics and cast aluminum casing with nice outlook The fixture is designed and manufactured strictly following CE standards complying with international standard DMX512 protocol It s available independently controlled and linkable with each other for operation And it is applicable for large scale live performances theater studio nightclubs and discos 4 IN 1 LEDs RGBW which features high brightness and stability Please carefully unpack it when you receive the fixture and check whether it is damaged during the transportation And please check whether the following items are included inside the box Moving Head One Signal Cable One Hanging Bracket One Power Cable One Safety Chain One User Manual One 10 Specifications Input Voltage AC90 260V 50 60Hz LED Quantities 7PCS OSRAM 12W 4 IN 1 LEDs R G B W Control Signal DMX512 master slave and sound activated or auto operation Control Channel 15 DMX c
3. cable to the female 3 pin XLR output of your controller and the other side to the male 3 pin XLR input of the moving head You can chain multiple Moving head together through serial linking The cable needed should be two core screened cable with XLR input and output connectors Please refer to the diagram below DMX 512 connection with DMX terminator ay AZ ib E F P 75 hy i F 1 3 7 li i l i p M ke an et T i E Tree En E 2 rri i u A l zi a a E m m kzi X p us i E E E P i m J j x iD l F Eee em e l i l La E m d mm m Lin KL Rin i Fir E m art COMMON imm pe Y hk Feder Did 54g aT j mi Mi fat DANEEL IN A t Y Dada ia LUE p Dux i MINIA For installations where the DMX cable has to run a long distance or is in an electrically noisy environment such as in a discotheque it is recommended to use a DMX terminator This helps in preventing corruption of the digital control signal by electrical noise The DMX terminator is simply an XLR plug with a 120 O resistor connected between pins 2 and 3 which is then plugged into the output XLR socket of the last fixture in the chain Please see illustrations below 1200 2 3 1 PIN 3 PIN 2 6 Menu Operations HOJ R AUJ G HLJ B ADJ LU PROGRAM HLJ 5 TEST MOU 3 RESET C D C C 3 LJ un Z C D o go jo C po ipio jo C jo lo jo mm x T C nu u
4. e with wall for smooth air flow so there should be no shelter for fans and ventilation for heat radiation If the external flexible cable or cord of this luminaire is damaged it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard 3 Operation Instructions 8 Photometric Data The moving head is for wash effect for on site decoration purpose Bh Photometric Beam Angle Da P Baam Ane LUM 00929 Don t turn on the fixture if it s been through severe temperature difference like after HB 3750 Tar Sa Lg f MN n anh x nel tee 1 i transportation because it might damage the light due to the environment changes So make sure T pas j iiet 135 1350 u 470 to operate the fixture until it is in normal temperature Ww LODS 1DB1C 122 f 131D 43 460 BB 73 JUAY 13 adi 1157 This light should be keep away from strong shaking during any transportation or movement Don t pull up the light by only the head or it might cause damages to the mechanical parts Don t expose the fixture in overheat moisture or environment with too much dust when installing it And don t lay any power cables on the floor Or it might cause electronic shock to the people Make sure the installation place is in good safety condition before installing the fixture Make sure to put the safety chain and check whether the screws are screwed properly when installing the fixture Make sure the lens a
5. hannels Power Consumption 120W Dimensions 152 D 265 W 310 H mm Packing Dimensions 260 D 320 W 335 H mm Net Weight 4 9kg Gross Weight 7kg 11 Maintenance and Cleaning The following points have to be considered during the inspection 1 All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded 2 There must not be any deformations on the housing color lenses fixations and installation spots ceiling suspension trussing 3 Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances 4 The electric power supply cables must not show any damage material fatigue or sediments Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed CAUTION Disconnect from mains before starting maintenance operation In order to make the lights in good condition and extend the life time we suggest a regular cleaning to the lights 1 Clean the inside and outside lens each week to avoid the weakness of the lights due to accumulation of dust 2 Clean the fan each week 3 A detailed electric check by approved electrical engineer each three month make sure that the circuit contacts are in good condition prevent the poor contact of circuit from overheating We recommend a frequent cleaning of the device Please use a moist lint free cloth Never use a
6. is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual iar mpartari amages caused by dhe disregard of fs user manual are bo sebyect fo weereexy The deae mW nar accept kabiy forc any rezoug gafectis or protcma If the device has been exposed to temperature changes due to environmental changes do not switch it on immediately The arising condensation could damage the device Leave the device switched off until it has reached room temperature This device falls under protection class Therefore it is essential that the device be earthed The electric connection must carry out by qualified person The device shall only be used with rate voltage and frequency Make sure that the available voltage is not higher than stated at the end of this manual Make sure the power cord is never crimped or damaged by sharp edges If this would be the case replacement of the cable must be done by an authorized dealer Always disconnect from the mains when the device is not in use or before cleaning it Only handle the power cord by the plug Never pull out the plug by tugging the power cord During initial start up some smoke or smell may arise This is a normal process and does not necessarily mean that the device is defective it should decrease gradually Please don t project the beam onto combustible substances Fixtures cannot be installed on combustible substances keep more than 50cm distanc
7. lcohol or solvents There are no serviceable parts inside the device Please refer to the instructions under Installation instructions Should you need any spare parts please order genuine parts from your local dealer 9 Key Features 7PCS OSRSM 12W 4 IN 1 LEDs R G B W 60 000 hours life span for LEDs and low power consumption Intelligent temperature sensor for LEDs over heat protection High efficiency 8 degree optic lens Color range with 16 7 millions additive RGBW colors High light output as 840LUX 7M at full 0 100 smooth linear dimmer with flicker free 20t s strobe effect with variable speed Pre programmed random strobe and pulse effects 15CH DMX channels Built in programs with macro effects DMX512 master slave and sound activated controllable or auto operation High definition blue TFT LCD display Quiet smooth and fast PAN TILT movement Low noise and efficient FAN cooling system 540 PAN and 250 TILT movement Scan position memory auto reposition after unexpected movement Compact size with only 4 9KG body and 310mm in height IEC power connector 45 max ambient temperature IP20 protection rating 3 Pin XLR DMX input output 2 Safety Instructions l CAUTION Be careful with your operations With a dangerous voltage you can Suffer a dangerous electric shock when touching wires This device has left the factory in perfect condition In order to maintain this condition and to ensure a safe operation it
8. n Ln T T ru T UW ru UT Ln m
9. re in good condition It s recommended to replace the units if there are any damages or severe scratch Make sure the fixture is operated by qualified personnel who knows the fixture before using Keep the original packages if any second shipment is needed Gm rati im 3 3f Im aifi um Don t try to change the fixtures without any instruction by the manufacturer or the appointed repairing agencies It is not in warranty range if there are any malfunctions from not following the user manual to operate or any illegal operation like shock short circuit electronic shock lamp broke etc 4 Mounting and Installation Cautions For added protection mount the fixtures in areas outside walking paths seating areas or in areas were the fixture might be reached by unauthorized personnel Before mounting the fixture to any surface make sure that the installation area can hold a minimum point load of 10 times the device s weight Fixture installation must always be secured with a secondary safety attachment such as an appropriate safety cable REL ILLERXS 7 DMX Channels ranei panenn ws een NN PAN Movement oa nse ems ranome 0 9 ow em mmemm 000000 s ome ems vtesteeimerement ome es mm m 0 10096 red dimmer from dark to bright La ee em remm 8 s om ems ewmmeame udi 0 10096 white dimmer from dark to bright Lr m 0 255 Speed control of PAN TILT fast to slow 0 244 CH1 CH14 activated Reset 245 255
Download Pdf Manuals
Related Search