Manual - ArtFox Lighting
Contents
1. GENERAL GUIDELINES This fixture is a lighting effect for a professional use on stage TV in discotheques theaters etc The fixture was designed for indoor use only This fixture is only allowed to be operated with the max alternating current which stated in the technical specifications in 6 page of this manual Lighting effects are not designed for permanent operation Consistent operation breaks may ensure that the fixture will serve you for a long time without defects Don t shake the fixture Avoid brute force when installing or operating the fixture While choosing the installation spot please make sure that the fixture isn t exposed to extreme heat moisture or dust Please don t project the beam onto combustible substances The minimum distance between light output from the projector and the illuminated surface must be more than 0 5 meter If you use the guick lock cam in hanging up the fixture please make sure the guick lock fasteners turned in the guick lock holes correctly Operate the fixture only after having familiarized with its functions Don t permit operation by persons not gualified for operating the fixture Most damages are result of unprofessional operation Please use the original packaging if the fixture is to be transported For safety reasons please be aware that all modifications on the fixture are forbidden If this fixture will be operated in any way different to the one described in this manual the2. product may suffer damaged and guarantee becomes void Furthermore any other operation may lead to short circuit burns electric shock crash etc SAFETY INSTRUCTIONS CAUTION Be careful with your operations With a dangerous voltage you can suffer a dangerous electric shock when touching wires This fixture has left the factory in perfect condition In order to maintain this condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual 1 In order to guarantee the product s life please don t put it in the damp places or even the environment over 60degress 2 Always mount this unit in safe and stable mater The qualified professionals are allowed to carry out the lamp installation operation and maintenance but they must guarantee to operate in strict accordance with the instructions referred to Important Damages caused by the disregard of this user manual are not subject to warranty The dealer will not accept liability for any resulting defects or problems If the fixture has been exposed to temperature changes due to environmental changes don t switch it on immediately The arising condensation could damage the fixture Leave the fixture switched off until it has reached room temperatures This fixture falls under protection class I Therefore it is essential that the fixture be earthed The electric conn
3. ICAL PARAMETERS Power Supply Voltage AC110 240V 50 60Hz Light Source 300W LED Average life 50 000h Control and Programming 16 channel modes Display LCD display Pan Tilt Resolution 16 bit DMX signal connection 3pin in amp out Power connection Powercon in amp out Cooling High efficiency die cast aluminium forced ventilation Weight Net weight 22kg Gross weight 24kg Packing Carton box packing size 50 5 49 63cm DMX CHANNELS Channel Name DMX value Function l Pan 0 255 Pan 2 Pine Fine 0 255 Pan Fine 3 Tilt 0 255 Tilt 4 Tile Fine 0 255 Tile Fine 5 P T Speed 0 255 P T speed 6 Dimming 0 255 Bulb Dimming 0 100 0 3 Off 7 Strobe uae 8 250 Strobe slow gt fast 251 255 Open 0 23 White 24 47 Red 48 71 Blue 72 95 Amber 8 Color 96 119 Green 120 143 Pink 144 167 light blue 168 191 Yellow 192 223 CW color spin fast gt slow 224 255 CCW color spin slow gt fast 9 Color specs 0 255 Color specs 0 11 Open 12 23 Gobol 24 35 Gobo2 36 47 Gobo3 48 59 Gobo4 60 71 GoboS5 72 83 Gobo6 84 95 Gobo7 10 Fixed Gobo 96 109 Gobo 7 shake slow gt fast 110 123 Gobo 6 shake slow gt fast 124 137 Gobo 5 shake slow gt fast 138 151 Gobo 4 shake slow gt fast 152 165 Gobo 3 shake slow gt fast 166 179 Gobo 2 shake slow gt
4. LED Spot 300W Please read this user manual before your operation a A WO N e Introduction General Guideline Safety Instructions Cleaning and Maintenance Technical Parameters DMX Channels Remark Thank you for your patronage We are confident that our excellent products and service can satisfy you For your own safety please read this user manual carefully before installing and fixture In order to install operate and maintain the lighting safety correctly We suggest that the installation and operation should be done by the verified technician and follow the instruction strictly CAUTION Keep this fixture away from rain and moisture CAUTION Keep this fixture away from rain and moisture Every person involved with the installation operation and maintenance of this fixture has to be gualified follow carefully the instruction of this manual INTRODUCTION Thank you for having chosen this professional moving head You will see you have acquired a powerful and versatile fixture Unpack the fixture Inside the carton box you should find 1 1 power in cable amp power out connector 2 1 3pin in DMX cable 3 2 C omega clamps 4 1 safety rope 5 1 English user manual Flight case clamps are optional Please check carefully that there is no damage caused by transportation Should there be any questions please consult your dealer and don t install this fixture
5. a well ventilated place at a distance of 50 centimeters or more with the walls At the same time please check if the fan and ventilation holes are unobstructed The following points have to be considered during the inspection 1 All screws for installing the lights or parts the light have to be tightly connected and must not be corroded 2 There must not be any deformations on the housing Fixations and installations spots ceiling suspension trussing 3 Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances 4 The electric power supply cables not show any damage material fatigue or sediments Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed A CAUTION Disconnect from mains before starting maintenance operation In order to make the lights in good condition and extend the lifetime we suggest a regular cleaning to the lights 1 Clean the inside and outside lens each week to avoid the weakness of the lights due to accumulation of dust 2 Clean the fan each week 3 A detailed electric check by approved electrical engineer each three month make sure that the circuit contacts are in good condition prevent the poor contact of circuit from overheating We recommend a freguent cleaning of the light Please use a moist lint free cloth Never use alcohol or solvents TECHN
6. ection must carry out by qualified person Make sure the power cord is never crimped or damaged by sharp edges If this would be the case replacement of the cable must be done by an authorized dealer Always disconnect from the mains when the fixture isn t in use or before cleaning it Only handle the power cord by the plug Never pull out the plug by tugging the power cord During initial start up some smoke or smell may arise This is a normal process and doesn t necessarily mean that the fixture is defective it should decrease gradually Please don t project the beam onto combustible substances If the external flexible cable or cord of this luminaire is damaged it shall be exclusively replaced by the manufacturer or his service agent of a similar gualified person in order to avoid a hazard CAUTION MA Never touch the fixture during operation The housing may heat up CAUTION Never look directly into the light source as sensitive persons may suffer an epileptic shock Please be aware that damages caused by manual modifications to be the fixture aren t subject to warranty Keep away from children and non professionals CLEANING AND MAINTENANCE 1 To reduce the risk of electrical shock or fire don t expose this unit to rain or moisture 2 Don t spill water or other liquids into or onto your unit 3 During long periods of non use disconnect the unit s main power 4 It should be installed in
7. fast 180 191 Gobo 1 shake slow gt fast 192 223 CW Gobo Spin fast gt slow 224 255 CCW Gobo Spin slow gt fast 0 11 Open 12 23 Gobol 24 35 Gobo2 36 47 Gobo3 48 59 Gobo4 60 71 GoboS5 72 83 Gobo6 84 95 Gobo7 11 Rotating gobo 96 109 Gobo 7 shake slow gt fast 110 123 Gobo 6 shake slow gt fast 124 137 Gobo 5 shake slow gt fast 138 151 Gobo 4 shake slow gt fast 152 165 Gobo 3 shake slow gt fast 166 179 Gobo 2 shake slow gt fast 180 191 Gobo 1 shake slow gt fast 192 223 CW Gobo Spin fast gt slow 224 255 CCW Gobo Spin slow gt fast 0 127 Gobo Angle 12 Gobo Rotating 128 192 CW Gobo Rotaing fast gt slow 193 255 CCW Gobo Rotating slow gt fast 0 127 Prism Close 13 Prism 128 255 Prism open 14 Prism Rotating 0 2 close 3 128 CW Prism rotating fast gt slow 129 255 CCW Prism rotating Slow gt fast 15 Zoom 0 255 linear zoom 0 100 16 Reset a se 255 Reset Stay 5 seconds REMARK The product has perfect performance and intergrity packing All users should be strictly comply with the warning and operating instructions as stated Or we aren t in charge of any result by misusing Any damage resulting by misuse isn t within the company s warranty Any fault or problem caused by neglecting the manual is also not in the charge of dealers Errors and omissions for every information given in this manual excepted All information is subject to change without prior notice
Download Pdf Manuals
Related Search