Home

Laurel (Intro)

Contents

1. The internal DVD ROM amp CD R RW drive that came with your computer is very sensitive to vibration and shock as it rotates a disc at a very high speed To prevent a breakdown in the drive and data corruption do not move the computer or apply shock or vibration to it while the disc is being accessed Do not store a mobile multi bay unit in an extremely hot or cold place or where the temperature can greatly change Do not place a mobile multi bay unit where it will be exposed to direct sunlight or bring it close to any heat generating apparatus Do not use a mobile multi bay unit where it will be exposed to shock or vibration Do not use a mobile multi bay unit in a damp or dusty location Do not use a mobile multi bay unit if a foreign object such as water or metal chips has gotten in it If any foreign object has gotten in it contact the Fujitsu Customer Support Center or your Fujitsu retailer When a mobile multi bay unit is dirty wipe it gently with a dry soft cloth or a soft cloth moistened with water or detergent diluted with water Never use volatile liquids such as benzene or thinner Do not disassembly or take apart any mobile multi bay unit Do not use or store a mobile multi bay unit near an apparatus producing a strong magnetic field 1 If your computer is in Suspend mode press the SUS RES button to resume operation 2 Click the zs icon Safely Remove Hardware in the lower right corner of the screen notificatio
2. 100 Desktop Control Panel Your LifeBook notebook includes a CD Player control panel You may use this panel to operate the Disc Player To use the desktop control panel 1 Click on Start 2 Click on All Programs 3 Click on LifeBook Application Panel 4 Click on Display CD Player The CD Player will appear in the upper left corner of your screen To close the panel click on the x button To minimize the panel click on the button N Z Q F oO Lu ROCD Player Options x CD Player isa ite tool to play music CDs Select the appearance of your CD player controls from the options below Change design Gray High Colo x I Always on top F Continuous play Disable Stop Eject Button for CD removal OK Cancel ppls DM Documents i G my Pitures AELA w windows catalog A internet Explorer Tour Windows xp 3B MSN Erplorer O outlook Express ED 1 co player Remote assistance windows Media Player CURE 2 Windows Messenger You can select from four appearances for your CD Player Simply double click on the track display area of the panel and a menu will appear which will allow you to select from a pull down menu On the CD Players Options menu box you have an options to select Always on top Continuous play and Disable Stop Eject Button from the CD removal If you click on Always on top the de
3. Possible Solution Cannot connect to the network There are several possible causes as listed to the right Refer to the specific section of this manual or your user s manual The following causes are possible Check each one of them The network name or encryption key is not right The driver has not correctly started The destination computer is not turned on You do not have the access privilege to the destination computer The card has failed Hardware conflict want to remove the driver Windows 98 Windows 98 When removing the driver make sure that the device is attached to the computer If you try to remove the driver while the device is detached from the computer the driver is not removed 1 Right click the My Computer icon on the desktop and then click Properties from the menu that appears System Properties appears Click the Device Manager tab Click beside Network adapters Perform the following steps Click Intersil PRISM Wireless LAN PCI Card Click Remove Confirm Device Removal appears Click OK The device is removed and System Settings Change appears Click No Close System Properties Make sure that the icon has disappeared from the task tray in the lower right corner of the screen Click Start Settings Control Panel Control Panel appears 10 Double click Add Remove Programs Add Remove Programs
4. Set the CD ROM correctly with its label facing upwards Is there any dirt Wipe it from the center outwards with a dry soft cloth condensation or water on the CD ROM Is the CD ROM scratched or Replace the CD ROM extremely warped Are you using a non standard Use a CD ROM which conforms to the standards CD ROM The CD cannot be ejected from the CD ROM Checkpoint Cause and Solution Is it in operating mode The CD can only be ejected when the personal computer main unit is in operating mode because its CD ROM drive has an electronic lock Check that the personal computer main unit is in operating mode and press the EJECT button If for some reason the CD tray does not come out even when you press the EJECT button insert a clip or somthing into the hole to the right of the EJECT button and pull the tray out If the tray doesn t still come out click the CD ROM icon in the My Computer window with the right button of the mouse and then click EJECT 114 2 Care and Maintenance If you use your Fujitsu LifeBook notebook carefully you will increase its life and reliability This section provides some tips for looking after the notebook and its devices Caution Electrical equipment may be hazardous if misused Operations of this product or similar products must always be supervised by an adult Do not allow children access to the interior of any electrical products and do not permit
5. upon starting your LifeBook or resuming from suspend mode the security system requires you to enter a password code using the buttons on the Security Application Panel After entering a correct password your LifeBook resumes system operation Refer diagram above Numbered Buttons Use these buttons to enter your password Refer diagram above Enter Button After entering the button strokes push this button to enter the password into the LifeBook Refer diagram above 88 The user and supervisor password may be set on this LifeBook A supervisor password is typically the same for all LifeBooks in a working group office or company to allow for system management Individual LifeBooks in a group environment should not use a common password A password consists of one to five button strokes plus the enter button A valid stroke consists of pushing one or up to four buttons simultaneously The following are valid button strokes e Pushing 4 by itself Pushing 2 and 3 at the same time Pushing 1 2 and 4 at the same time Pushing 1 2 3 and 4 at the same time The following are valid passwords The numbers within braces are button strokes using more than one button 2 3 1 enter 4 enter e 13 2 3 4 1 4 2 enter Setting Passwords When shipped from the factory no passwords are set You have a choice of having no password or setting a supervisor and user
6. 1 Turn off the power to the computer and disconnect the AC adapter 2 insert the supplied modular cable into the modular connector on the right panel of the computer Insert firmly until it clicks Modular connector 3 Disconnect your telephone s modular cable from the modular jack of the telephone line re Pull it out while pressing in the clip of the modular cable 81 IMPORTANT If your telephone line connector is rosette type it must be changed to a modular type If such a change is necessary have it done by an authorized person You can also ask your telephone company to do the work Modular type Rosette type 4 Connect the modular cable to the modular jack of the telephone line Insert the plug on the other end of the cable you have connected to the computer in Step 1 Critical Points Follow these steps to check whether the device driver has been installed correctly 1 The telephone is not usable with its modular cable disconnected Do not forget to connect it for telephone use after finishing Internet communication 2 A modular cable may not be connected to your computer if it is routed around a household electrical appliance or wound and tied in an bundle 3 Ifthe supplied modular cable is too short to connect your computer to a modular jack for the telephone line purchase a commercially available modular cable with a proper length Note that the use of a long modular cable may result in a t
7. Lu Avoid prolonged exposure to direct sunlight or excessive heat Keep the cards dry Do not flex or bend the cards and do not place heavy objects on top of them Do not force cards into the slot Avoid dropping cards or subjecting them to excessive vibration 119 3 Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your notebook Active Matrix Display A type of technology for making flat panel displays which has a transistor or similar device for every pixel on the screen APM Advanced Power Management Auto Airline Adapter A device which converts the DC voltage from an automobile cigarette lighter or aircraft DC power outlet to the DC voltage needed to power your notebook BIOS Basic Input Output System A program and set of default parameters stored in ROM which tests and operates your notebook when you turn it on until it loads your installed operating system from disk Information from the BIOS is transferred to the installed operating system to provide it with information on the configuration and status of the hardware Bit An abbreviation for binary digit A single piece of information which is either a one 1 or a zero 0 bps An abbreviation for bits per second Used to describe data transfer rates Boot To start up a computer and load its operating system from disk ROM or other storage media into RAM Bus An electrical circuit whi
8. cccsseeessseeesseeeeeseeeeesseeneesseeenseeeens 77 Specifications eccscsccccetecsiccecscecsasescaecsececsctesscursacessseeseecesies 78 GIOS SAN Y 5 scse cece dcacictatasescesceescecesdtvtec cdectvemucasdenbeneeaatdeuestnx 79 9 About the Internal Modem sssesssenssnunnenunnnnnnnnnnnnnnnnennnn 81 10 Using Internal LAN ccc seteesseeeeeeseeeeeseeeeeseeeeenseeeeenes 83 Connecting a LAN Cable cci ccti cain seaieiere E E 84 11 Connecting a USB Device cccseeeeeseeeeeeeeeeeeeeeneeeeeeee 86 Connecting a USB dOViCO sirasini uheass 87 12 LifeBook Security Application Panel sssseeseee 88 LifeBook Security Application Panel area Setting up your LifeBook Security Panel cath 88 PaSSWOldS s r iecatiiaideatie sen avenenianes 89 Operating your LifeBook Security Application Panel 90 PrOCa UtiONS oars eaae tes sei a eE EENE 91 Uninstalling the security Panel Application 91 Configuring your LifeBook Application Panel 98 Configure your E mail Account Settings sach sss 96 Desktop Control Panel ccececesseeesseeeeeeseeneeeaeeeeseaeeeeeneeaeeeees 101 13 Connecting a MOUSE cecceeceeeeeeeeeeeeeeeeeeeeeneeeeeenenes 103 Connecting a USB MOUS aasre eea ENE 103 TA PINTEN isc cscices cc ctast acces eee seed naaa ea santana naatasan cxesnseetes Gadenes 105 Connecting PNINOR i esccie testes titre arend r N E 105 15 Connecting an External Display ccsscs
9. folder or printer you can use them from any computer on the network a Setting File and Printer Sharing for Microsoft Networks 1 Click Start Settings Control Panel Double click the Network and Dial up Connections icon The Network and Dial up Connections windows appears N z Q F oO Lu Right click the Local Area Connection then click Properties from the menu that appears Local Area Connection Properties appears Critical Points More than one network adapter is installed in your system if more than one Local Area Connection entry If File and Printer Sharing for Microsoft Networks is displayed in the list make sure that it is checked If it is not checked check it and click OK You do not have to perform the following steps Go to the next section entitled Sharing Files If File and Printer Sharing for Microsoft Networks is not found in the list click Install and perform Step 5 and subsequent steps When you click Install the Select Network Component Type window appears Perform the following steps e Click Service Click Add The Select Network Service window appears Perform the following steps e Click File and Printer Sharing for Microsoft Networks e Click OK You will go back to Local Area Connection Properties and File and Printer Sharing for Microsoft Networks is added to the list Click OK Critical Points If you
10. the connector of the cable connected with the PC card or it may damage the equipment Critical Points When you remove a PC card attached with a cable do not pull the cable connected to the PC card or it will result in failure When you remove a PC card follow the procedure below or it will result in failure Some PC cards require shutting down when you remove them Consult with the manual of the PC card 27 A HIGH TEMPERATURE APC card may be quite hot right after use Wait for a while before removing a PC card after Step 3 to avoid burning your fingertips INJURY When you remove a PC card do not insert your finger into the PC card slot to avoid cutting your fingertips Click the iz icon Safely Remove Hardware in the lower right corner of the screen notification area where a clock is displayed Critical Points Don t eject the PC card by clicking the Stop button in the Safely Remove Hardware dialog box that appears when you double click the icon Safely Remove Hardware in the lower right corner of the screen notification area where a clock is displayed Doing so may cause your computer to become unstable If the PC card is being installed for the first time install any necessary driver XXXXXXXxX refers to the name of the PC card inserted When the message Remove Hardware appears raise the PC card eject lock button PC card eject lock button 28 4 Eject the PC card Press
11. Always disconnect the power plug Pull the plug not the cord e Clean your LifeBook notebook with a damp lint free cloth Do not use abrasives or solvents Use a soft cloth to remove dust from the screen Never use glass cleaners 115 Storing your LifeBook Notebook If storing your notebook for a month or longer turn your LifeBook notebook off and remove all Lithium lon batteries Store your LifeBook notebook and batteries separately If you store your notebook with a battery installed the battery will discharge and battery life will be reduced In addition a faulty battery might damage your notebook Store your LifeBook notebook in a cool dry location Temperatures should remain between 25 C 13 F and 60 C 140 F Travelling with your LifeBook Notebook Do not transport your LifeBook notebook while it is turned on Do not check your LifeBook notebook as baggage Carry it with you Always bring your System Recovery CD that came with your LifeBook notebook when you travel If you experience system software problems while travelling you may need it to correct any problems Never put your LifeBook notebook through a metal detector Have your notebook hand inspected by security personnel You can however put your LifeBook notebook through a properly tuned X ray machine To avoid problems place your notebook close to the entrance of the machine and remove it as soon as possible or have your notebook hand inspected by
12. F oO Lu The remaining battery charge indicator does not stop flashing Checkpoint Cause and Solution Is the battery connected correctly Check that the battery is connected correctly If it is connected correctly there is an abnormality in the battery pack so replace the battery pack Is the battery low Attach the AC adaptor and charge the battery Floppy disk can not be used Checkpoint Cause and Solution If the floppy disk loaded into the floppy disk drive cor rectly Insert the floppy disk with its label facing up into the drive shutter and keep inserting firmly until you hear a clicking sound Is the floppy disk formatted New floppy disks can not be used until they are formatted initialized Format the floppy disk Is Diskette A set to Not Installed in the BIOS setup Check the Diskette A item in the BIOS setup Main menu Is Diskette access set to Supervisor only in the BIOS setup Check the Diskette access item in the BIOS setup Security menu Is the floppy disk write inhibited Set the write protect tab on the floppy disk to the write enable position Does it work with a different floppy disk If it works with a different floppy disk then the problem floppy disk may be damaged 112 No sound or minimal sound from speaker Checkpoint Cause and Solution Is the volume control correctly adjusted Turn the
13. Zealand Location Information 1 Go to Control panel select modem icon 2 Choose New Zealand in What country r region are you in now S 3 Select Phone system as Tone Dialing 4 Close vii Note Modem setting in Windows XP A If you are located in Australia Edit Location General Area Code Rules Calling Card 1 Click Start select Control panel select Phone and Modem Options rx Location name New Location 2 Double click New Location Specify the location fram which you will be dialing 3 Choose Australia in Country region pull down pall poe menu bar r i ESON Dialing n 4 Select Phone system as Tone Dialing When dialing from this location use the folowing rules 5 Click OK and Apply To access an outside line for local calls diak To access an outside line for long distance calls dial Use this carrier code to make long distance calls Use this carrier code to make intemational calls To disable call waiting dial Dialusing Tone O Pulse OK Cancel Apply B If you are located in New Zealand Edit Location EEA General Area Cede Rules Calling Card 1 Click start select Control panel select Phone and Modem Options ER sirname Resin 2 Double click New Location Specify the location from which you wil be dialing 3 Choose New Zealand in Country region pull down peli pees jew Zealan v menu bar 4 Select Phone system as Tone Dialing e
14. hazards always turn off your PC and detach the AC adopter from it before installing removing memory SWALLOWING To avoid danger of suffocation keep detached small parts such as covers caps or screws away from babies and children If a child has swallowed any of these parts consult the doctor immediately N Z Q F oO Lu A FAILURE When installing or removing memory catch hold of its edge to avoid touching the terminal or IC Be careful not to touch internal parts or terminals to avoid poor contact FAILURE Memory is composed of static sensitive parts and it is broken easily if static electricity S build in a human body is discharged and flows through it To avoid damage to the memory be sure to touch a metal object to discharge static electricity before touching the memory FAILURE Before installing or removing memory always turn off your PC Installing or removing memory with Windows XP 2000 Me 98 on standby or your PC in the Hibernation mode could result in the loss of data or cause damage to your PC or memory IMPORTANT To remove screws from your PC use a 1 screwdriver that matches the size of the screws M2 The use of a screwdriver of any other size could cause damage to the head of a screw Do not install any memory other than Fujitsu tested memory 37 38 Critical Points To check the memory size open the Information menu of BIOS Setup Utility and select Memory Sl
15. is too large PPPoE Point to Point Protocol over Ethernet A protocol for Ethernet using a Point to Point Protocol PPP which is used for connection on the phone line Protocol Procedures and rules use to send and receive data between computers Method of sending and receiving data Process used to handle communication errors Conditions required for communication are organized in procedures for correct transfer of information SSID Service Set Identifier Specifies which network you are joining Some systems allow you to specify any SSID as an option so you Can join any network TCP IP Transmission Control Protocol Internet Protocol A standard Internet protocol that is most widely used Wi Fi Compatible Wi Fi Wireless Fidelity Identifies that the product has passed the interoperability test supplied by the WECA Wireless Ethernet Compatibility Alliance which guarantees the interoperability of wireless IEEE 802 11 LAN products For more information on the Wi Fi standard go to the WECA website at www wirelessethernet com 80 9 About the Internal Modem Your computer has a V 90 compliant built in fax modem A ELECTRIC SHOCK Do not insert your fingers into a modular jack or you may receive an electric shock A FAILURE When using a modular cable always connect it to a modular connector otherwise your computer could break down N Z Q F oO Lu Q Connecting a modular cable
16. key pad disables the ten keys on your computer 18 4 Replacing the Internal Battery Pack A ELECTRIC SHOCK Before replacing the battery pack be sure to turn off the computer and disconnect A the AC adapter from it Also don t touch any connector of the computer or battery pack to avoid electric shock or malfunction Z O oO LW 2 Q Replacing the internal battery pack 1 Turn off the power to the computer and disconnect the AC adapter 2 Close the LCD display and turn the bottom side of the computer up 3 Release the lock 1 Slide the internal battery pack lock while sliding the release button in the direction of the arrow and 2 release the lock Release button Internal battery pack lock a 1 Fl 19 4 Remove the internal battery pack Put a finger in the indentation opened as a result of sliding the internal battery pack lock and lift the internal battery pack Internal battery pack lock 4 5 install a new battery pack Insert the new battery pack diagonally into the bay and push it down until it is set in place 6 Slide the internal battery pack lock until it clicks into place 1 Slide the internal battery pack lock to the right end and 2 make sure that the red colored part of the release button is completely hidden Internal battery pack lock 20 SECTION N Z Q F oO Lu This section explains installation of options for this c
17. master software volume control or the manual volume on the LifeBook notebook e The Disc Player desktop control panel is designed to be displayed in High Color 16 bit or in True Color 24 bit or more If you have your notebook s display set for 256 colors or less the Disc Player control panel will display in a basic mode 102 13 Connecting a Mouse 1 Plug the USB mouse cable in the USB port of the computer Align the connectors by matching their shapes and insert the connector of the mouse straight into the USB port of the computer USB port N Z Q F oO Lu Critical Points A USB mouse can be connected and disconnected even when the computer is on Connecting a USB mouse does not automatically disable the Flat Point To disable the Flat Point follow the steps described in the next section Disabling the Flat Point Q Disabling the Flat Point When a USB mouse is connected to your computer not only the mouse but also the Flat Point are enabled To disable the Flat Point follow these steps 1 After Windows starts press the F key while holding the Fn key down The Flat Point switches between Enabled and Disabled each time you press the Fah key while holding the Fnll key down When you activate or deactivate the Flat Point the message Internal pointing device Enabled or Internal pointing device Disabled appears on the screen respectively IMPORTANT e Don t disab
18. metal shutter 117 ae Z Q F oO Lu Caring for your Floppy Disk Drive To clean wipe the floppy disk drive clean with a dry soft cloth or with a soft cloth dampened with water or a solution of neutral detergent Never use benzene paint thinner or other volatile material Avoid storing the floppy disk drive in extremely hot or cold locations or in locations subject to severe temperature changes Store at temperatures between 50 F 10 C and 125 F 52 C Keep the floppy disk drive out of direct sunlight and away from hating equipment Avoid storing the floppy disk drive in locations subject to shock and vibration Never use the floppy disk drive with any liquid metal or other foreign matter inside the floppy disk drive or disk Never disassemble or dismantle your floppy disk drive DVD CD RW CDs Caring for your DVD CD RW CDs 118 DVD CD RW CDs are precision devices and will function reliably if given reasonable care Always store your DVD CD RW CDs in its case when it is not in use Always handle DVD CD RW CDs by the edges and avoid touching the surface Avoid storing any DVD CD RW CDs in extreme temperatures Do not bend DVD CD RW CDs or set heavy objects on them Do not spill liquids on DVD CD RW CDs Do not scratch DVD CD RW CDs Do not put a label on DVD CD RW CDs Do not get dust on DVD CD RW CDs Never write on the label surface with a ballpoint pen or pencil Always use a felt pen Ifa DV
19. not drop puncture disassemble mutilate or incinerate the battery Recharge batteries only as described in this manual and only in ventilated areas Do not leave batteries in hot locations for more than a day or two Intense heat can shorten battery life Do not leave a battery in storage for longer than 6 months without recharging it Increasing Battery Life e Power your LifeBook notebook through the AC or optional auto airline adapater whenever possible e If your LifeBook notebook is running on battery power all day connect it to the AC adapater overnight to recharge the battery Keep brightness to the lowest level comfortable Set the power management for maximum battery life e Put your LifeBook notebook in Suspend mode when it is turned on and you are not actually using it e Limit your DVD CD RW CD ROM access e Disable the Windows CD automatic insertion function Always use fully charged batteries e Eject PCMCIA cards when not in use FLOPPY DISKS AND DRIVES Caring for your Floppy Disks e Avoid using the floppy disks in damp and dusty locations Never store a floppy disk near a magnet or magnetic field Do not use a pencil or an eraser on a disk or disk label e Avoid storing the floppy disks in extremely hot or cold locations or in locations subject to severe temperature changes Store at temperatures between 50 F 10 C and 125 F 52 C Do not touch the exposed part of the disk behind the
20. or directory of floppy diskette or hard drive XGA Extended VGA Zip Drive A 100MB read rite removable media disk drive Zoomed Video A PC Card port which allows notebook PCs to deliver full screen broadcast quality video through third party PC Cards including TV tuners video capture and MPEG full motion video mM Z Q F oO Lu 127
21. password You must set the supervisor password before the user password Critical Points The purpose of supervisor password is to be able to bypass the user password in case the user password is forgotten The supervisor password alone will not lock the system You have to set both the supervisor and user passwords for the security panel to work Setting Supervisor Password You must have set a supervisor password before setting any user passwords The supervisor password can bypass the user password 1 Go to the Start menu 2 Click on Run 3 Type in FISECS EXE then press Enter 4 Follow the on screen instructions to set the Supervisor password 89 N z Q F oO Lu n Setting User Password 1 Go to the Start menu 2 Click on Programs 3 Click on Security Panel Application and Set User Password 4 Follow the on screen instructions to set the User password Critical Points You may change or remove the supervisor or user password by repeating the steps defined above The security lock feature is in effect both when the system resumes from Off or suspend state You always need to push the Suspend Resume button to input the user password Your system will not begin the boot sequence without entering your supervisor user password From Off State 1 Turn on your system 2 When the Security Indicator flashes enter the password and press Enter button For example if the password is 22222 Press Butto
22. protocol is installed do the are not displayed when not installed or the IP following to check the IP address the Network Computer address is not set 1 Windows 98 icon is double clicked correctly Click Start gt Programs gt MS DOS Prompt Windows 2000 Click Start gt Programs gt Accessories Command Prompt Windows XP Click Start All Programs gt Accessories Command Prompt Enter IPCONFIG command and press Enter SECTION 2 If your hard disk is C drive enter C gt ipconfig Check that the IP address is correctly displayed under the IP Address Example IP address 10 0 1 3 Subnet Mask 255 255 255 0 Default Gateway 10 0 1 1 No communication due Shorten the distance between computers to poor radio signal or remove visible obstacles between them and retry the connection 71 Problem Possible Cause Possible Solution IP packet isn t reaching Run the PING command Perform the following steps to run the PING its destination to check the connection command to check if the IP packet is correctly delivered to the destination To run the PING command the TCP IP protocol must be installed First you will determine your IP address then you will make sure your IP address can respond and then you will make sure other computers can be addressed 1 Windows 98 Click Start Programs gt MS DOS Prompt Windows 2000 Clic
23. server select Obtain DNS server address automatically N k ewar For the IP address DNS server and default gateway follow the network administrator s instructions if any Table 7 Setting an IP Address 6 Click OK The Local Area Connection Properties window appears again 7 Click OK When a message appears prompting you to restart the computer click Yes a Checking the full computer name and workgroup Click Start Settings Control Panel l 4 Check Full computer name and Workgroup Ask your network administrator and check the setting Item Description Full A name to identify the computer on the network You can specify any name Computer to each computer Name For easier identification use the model name or user name Workgroup A name for the network group AdHoc Network Specify the same name to all computers within the same network Infrastructure Network Specify a workgroup name to connect to To change the setting click Properties and follow the instructions on the screen System Properties appears again Table 8 Checking computer name and workgroup 5 Click OK When a message appears prompting you to restart the computer click Yes 60 In this section you set sharing of the drive folder and printer You only need to set this when you are sharing files or a printer with other computers on the network When you share a drive
24. so that the LAN device will not operate if you turn on the computer before connecting a LAN cable to it when the computer is powered by the internal battery Critical Points When disconnecting the LAN cable from the LAN port pull it while pushing in the tab to avoid damage to the plug When using the LAN device you should preferably power your computer from the AC adapter since the LAN device consumes a large amount of electrical power The built in LAN device in your computer cannot be used along with any LAN card If the LAN device does not operate normally make all necessary settings To avoid damage to the LAN device do not connect a LAN cable to a modular jack 85 11 Connecting a USB Device Preparing necessary items USB device Devices that can be connected to USB ports Here are some typical examples of USB devices Prepare a USB device that meets your needs Digital camera CCD camera Mouse Printer Scanner Keyboard Speaker USB cable Used to connect a USB device to the computer Some USB devices come with a USB cable For some USB devices e g USB mice the USB cable is an integral part of them For more information refer to the manual for the USB device you want to connect USB device driver Some USB devices come with a CD or floppy disk that contains their respective drivers Refer to the instruction manual for the USB device and use one that is compatible with Windows installed on yo
25. system will establish connection with your provider check for and retrieve new mails terminate the connection To configure After checking mail This setting let you set your computer to return back to the previous power saving state after checking mail E Mail Account Settings x th Important Mail Sound SA E MailNotificstion LED D Auto Mail Check GA Mail Check Interval zl Connection J After checking mail Special recipient If you press the E mail button on Standby or Power Off your mail application will return your computer to its previous power saving state after checking mail Return computer to previous power state after checking for new mail Return computer to previous power state only if finding no new mail C Always retum lt Caution gt If the PC wake up by the E mail button form Hibernate the computer tums to Standby instead of Hibernate OK Cancel Apply 97 To configure Auto Mail Check This function allow you to specify day and time for checking new mail Only applicable when the PC stays Standby E Mail Account Settings x tH Important Mail G sound GA E MailNotiicatonLED DA Connection After checking mail Special recipient Auto Mail Check GA Mail Check Interval Specify Day and Time for checking for a new mail I Set the day of week and time to check for new mail Choose the day of week Clear Every Item F Sun M Mon M Tue Wed W Thu M Fi W Sat
26. that you specify the encryption keys If you do not specify the keys any computer with a wireless LAN card can be connected This presents a risk that your data may be stolen or destroyed Item Description Encryption Click the down arrow and select an encryption option WEP Disable Disables the encryption In this case Create keys with Passphrase and subsequent items are greyed out and you cannot enter anything 64 bit The encryption is set Select either Create keys with Passphrase Create keys manually or ASCII Input and enter the encryption keys 128 bit The encryption is set Select either Create keys with Passphrase Create keys manually or ASCII Input and enter the encryption keys Create Keys with Passphrase Not supported Passphrase Not supported Create Keys Manually Hexadecimal Input Select this to use hexadecimal character codes to set the encryption keys Keys 1 4 Enter a 10 digit value when you have selected 64 bit for the encryption Enter a 26 digit value when you have selected 128 bit for the encryption ASCII Input Select to use the ASCII codes to set encryption keys Keys 1 4 Select this if network does not contain other wireless LAN cards that are set with encryption key using character codes Enter a 5 digit value when you have selected 64 bit for the encryption Enter a 13 digit value when you have
27. the password that has been set in your LifeBook otherwise the LifeBook will not be able to operate or resume from suspend The LifeBook Security Panel is a high security feature Should you forget the password that you have set you are required to return your LifeBook to Fujitsu PC Asia Pacific Pte Ltd 238A Thomson Road 24 01 05 Novena Square Tower A Singapore 307684 Note The authorised Fujitsu Service Center will not be able to reset the password Please remember to keep your password in a safe place There is a service charge for unlocking the password restricted LifeBook You will bear all the cost returning the LifeBook to our service centre to unlock the password Email www fujitsu pc asia com contactus 92 When you start Windows the LifeBook Application Panel is automatically activated As an application launcher the LifeBook Application Panel is very flexible giving you a variety of options To set up the Panel to best suit your needs we have provided the Application Panel Setup utility that quickly and easily helps you make the most of this valuable feature To configure your LifeBook Application Panel with Application Panel Setup 1 Click on Start 2 Click on Control Panel 3 Click on Application Panel Fo LifeBook Application Panel x Application B Internet E mail Specify which program starts when each specific button is pressed Specify the button action Start a Program v
28. them to handle any cables LIFEBOOK NOTEBOOK Caring for your LifeBook Notebook Your LifeBook notebook is a durable but sensitive electronic device Treat it with care Make a habit of transporting it in a suitable carrying case Do not attempt to service the computer yourself Always follow installation instructions closely Keep it away from food and beverages e If you accidentally spill liquid on your notebook 1 Turn it off 2 Position it so that the liquid can run out 3 Let it dry out for 24 hours or longer if needed mM Z Q F oO Lu 4 If your notebook will not boot after it has dried out call your support representative Do not use your LifeBook notebook in a wet environment near a bathtub swimming pool e Always use the AC adapter and batteries that are approved for your notebook e Avoid exposure to sand dust and other environmental hazards Do not expose your LifeBook notebook to direct sunlight for long periods of time as temperatures above 140 F 60 C may damage your notebook Keep the covers closed on the connectors and slots when they are not in use Do not put heavy or sharp objects on the computer e Ifyou are carrying your LifeBook notebook in a briefcase or any other carrying case make sure that there are no objects in the case pressing on the lid Do not drop your LifeBook notebook Do not touch the screen with any sharp objects Cleaning your LifeBook Notebook
29. volume control for the correct volume If this does not change the volume double click the task bar sound indicator and adjust the volume Check also whether the sound driver is installed correctly Can not record from Mic o r Line In jack Checkpoint Cause and Solution Is the mic correctly adjusted Turn the volume control to obtain the correct volume If the line jack is connected to the sound source then check that connection If this still does not solve the problem then double click the task bar sound indicator and adjust the volume icp panel does not close Checkpoint Cause and Solution Is something caught in the Forcing the LCD display panel closed can damage it Check for LCD display panel something caught in the LCD display panel Also a metal object o z F oO Lu n such as a paper clip can cause a breakdown if it gets caught in between the keys The power management function is not executed Checkpoint Cause and Solution Is Power Savings set to off in the BIOS setup Reset the BIOS setup Are you executing a program that rewrites the screen If you are executing a program that rewrites the screen even when no key is pressed for example a clock display or screen save the power management function is not executed 113 Data cannot be read from the CD ROM drive Checkpoint Cause and Solution Is the CD ROM correctly set
30. 1 Ask your network administrators to check the setting 4 When you finish your entry click Apply Item Description Profile Enter the system file name in which the parameter information is to be saved Mode Ad Hoc Network Click the down arrow and select 802 11 AdHoc Infrastructure Network Click the down arrow and select Infrastructure SSID Enter the network name to which you want to connect Transmit Rate Obtain the information from your network administrator If you do not have a network administrator select Fully Automatic Power Save Not supported Enabled AdHoc AdHoc Network Select the same channel 1 13 for all connected computers Channel If there is more than one wireless LAN nearby such as on the same floor we recommend that the channels for each LAN be 5 numbers apart e g if there are two other LANs nearby the channels used should be 1 6 and 11 Infrastructure Network Not an option Table 1 Profile Parameters 5 Click the Encryption tab 52 6 Set the encryption items in accordance with Table 2 AdHoc Network Specify the same value for all the computers for which the encryption key is used for connection e Infrastructure Network Specify the identical encryption keys to the encryption keys set for the access point For instructions on how to check the encryption keys set for the access point refer to the access point manual Critical Points Make sure
31. 11Mbps Wireless LAN for Windows Click Change Remove A window appears asking you if you really want to remove the driver 12 Click Yes When the driver is removed a window appears showing that the driver has been removed 13 Click OK 14 Close Add Remove Programs and Control Panel 15 Shut down Windows and turn off the computer 74 Problem Possible Cause Possible Solution want to remove the driver Windows XP Windows XP When removing the driver make sure that the device is attached to the computer If you try to remove the driver while the device is detached from the computer the driver is not removed 1 Click Start right click My Computer and then click Properties from the menu that appears System Properties appears Click the Hardware tab Click Device Manager Click beside Network adapters Right click Intersil PRISM Wireless LAN PCI Card and click Uninstall from the menu that is displayed Confirm Device Removal appears Click OK Close System Properties Make sure that the icon has disappeared from the task tray in the lower right corner of the screen Click Start Control Panel Control Panel appears 10 Double click Add Remove Programs Add Remove Programs appears 11 Perform the following steps Click PRISM 11Mbps Wireless LAN for Windows e Click Change Remove A window appears asking you if y
32. C If the FDD unit is connected to the FDD unit connector of the port replicator however install remove the port replicator after switching the PC power off e Certain peripheral devices connected to the port replicator may operate unstably if the port replicator is installed removed while the PC power is on If this happens switch the PC power off prior to installing removing the port replicator N z F oO Lu This section describes how to install the port replicator If any peripheral device is connected to the PC rear side remove it beforehand A INJURY e Be careful not to catch your fingers in the space between the PC and the port replicator when installing it It may cause an injury 1 Install the port replicator to the PC bottom side Fitting the connectors on the PC and the port replicator lower the PC horizontally 1 lightly press the parts shown below 2 and firmly set the port replicator Port replicator connection connector IMPORTANT e To install a peripheral device to or remove it from the port replicator be sure to switch the PC power off and disconnect the AC adapter in advance Do not carry the PC with the port replicator installed The connectors on the PC and or the port replicator may be damaged 49 This section describes how to remove the port replicator 1 If any peripheral device is connected to the port replicator switch the power off 2 Release the port replicator
33. Copyright Fujitsu Limited has made every effort to ensure the accuracy and completeness of this document However as ongoing development efforts are continually improving the capabilities of our products we cannot guarantee the accuracy of the contents of this document We disclaim liability for errors omissions or future changes LifeBook is a trademark of Fujitsu Limited Microsoft Windows MS MS DOS and Windows NT are registered trademarks of the Microsoft Corporation of the United States in the United States and other countries Intel is a registered trademark of the Intel Corporation of the United States Macrovision This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Apparatus Claims of U S Patent Nos 4 631 603 4 577 216 4 819 098 and 4 907 093 licensed for limited viewing uses only Dolby Manufactured under license from Dolby Laboratories DOLBY PRO LOGIC and the double D symbol are trademarks of Dolby Laboratories Copyrights 1992 1999 Dolby Laboratories All rights reserved Phoenix is a registere
34. D CD RW CD is subjected to a sudden change in temperature cold to warm condensation may form on the surface Wipe the moisture off with a clean soft lint free cloth and let it dry at room temperature DO NOT use a hair dryer or heater to dry DVD CD RW CDs If a DVD CD RW CD is dirty use only a DVD CD RW CD cleaner or wipe it with a clean soft lint free cloth starting from the inner edge and wiping to the outer edge Caring for your DVD CD RW CD ROM Drive Your DVD CD RW CD ROM drive is durable but you must treat it with care Please pay attention to the following points The drive rotates the compact disk at a very high speed Do not carry it around or subject it to shock or vibration with the power on Avoid using or storing the drive where it will be exposed to extreme temperatures Avoid using or storing the drive where it is damp or dusty Avoid using or storing the drive near magnets or devices that generate strong magnetic fields Avoid using or storing the drive where it will be subjected to shock or vibration Do not disassemble or dismantle the DVD CD RW D ROM drive PC CARDS Caring for your PC Cards PC Cards are durable but you must treat them with care The documentation supplied with your PC Card will provide specific information but you should pay attention to the following points To keep out dust and dirt store PC Cards in their protective sleeves when they are not installed in your notebook ae z F oO
35. Identifies either Read Only or Full depending upon the password Passwords A password used for Access Type e Read Only Password Specify a password to allow read e Full Access Password Specify a password to allow read and write Table 4 Password Setup 4 Click OK The folder is set for sharing and the Work folder icon changes Q Printer Sharing 1 Click Start Settings Printers Printers appears showing the printers that are connected 2 Right click the printer that you want to share and then click Sharing from the menu that appears 3 Click Sharing and select necessary items 57 Item Description Not Shared Disables printer sharing Shared as Enables printer sharing Share Name Specifies a share name for the printer to be shared Comment Enter a description of the printer to be shared Passwords Specify passwords If you specify a password you need to enter it when using the printer Table 5 Printer Sharing 4 Click OK The folder is set for sharing and the Work folder icon changes a Checking the Connection After the network setting is completed access the shared drive on another computer to check the connectivity of the wireless LAN network a Accessing Another Computer _ Double click the Network Neighborhood on the desktop The computers that are connected to the network are displayed Double click the comp
36. Lightning could cause damage to the computer and cause a fire in the worst case A ELECTRIC SHOCK A Don t put any finger into the LAN port or you could get an electric shock FAILURE Be sure to plug a LAN cable correctly in the LAN port Failure to do so could cause your computer to fail Turn off your computer and disconnect the AC adapter Plug a LAN cable in the LAN port on the right panel of the computer Plug the LAN cable in the network device Connect the other end of the LAN cable that you connected in step 2 to the LAN port of the network device then turn on the network device 10 Connect the AC adapter to the computer and turn the power on Click the Start button and select Control Panel Click Performance and Maintenance then Power Option Click of System standby on the Power Schemes tab and select Never Click w of System suspended and select Never Click OK Make all necessary network settings N z F oO Lu 2 IMPORTANT When you are connecting to a local area network or the Internet using the LAN function you should not put your computer into Standby or Hibernation mode Doing so could cause your computer to break connection with the network or the Internet depending on the environment in which your computer is being used Turn off your computer if you are not using the computer for the connection Your computer is configured by default
37. P search f roders FE ib 314 Floppy A WIN_ME C Documents end Settings Al Users 3 owner Cookies Deskop E V Favcrites L My Cocuments Start Menu E E Programs Drivers Hotkey Fusc2B1Logoed2_Eng DB Mouse L TouchBu ton Jpn5 1 TouchBu tpn_JPN L PROGRA 1 BRA access lt The illustration varies depending on the model and use conditions Move the scroll button forward and backward The window scrolls in the same direction you moves the button Cr SS To return push this forward Sw SS To advance push this backward 14 3 Keyboard Names and functions of the principal keys Z e oO Ww Keys that can be used as ten keys 1 Esc Escape key Used to cancel the current task and return to the previous task 2 Function keys Functions assigned to these keys vary from application to application Num Lk Numerical Lock key Pressing the MmIk key activates the ten key mode To deactivate the ten key mode press it once again O insert Prt Sc Print Screen key Insert key Used to specify whether to overwrite an existing string or to insert a new string Prt Sc Print Screen key Used to save the currently displayed windows as pictorial data bitmap file To do s
38. Properties appears 11 Double click PRISM 11Mbps Wireless LAN for Windows A window appears asking you if you really want to remove the driver 12 Click Yes When the driver is removed a window appears showing that the driver has been removed 13 Click OK 14 Close Add Remove Programs Properties and Control Panel 15 Shut down Windows and turn off the computer 73 SECTION 2 Problem Possible Cause Possible Solution want to remove the driver Windows 2000 Windows 2000 When removing the driver make sure that the device is attached to the computer If you try to remove the driver while the device is detached from the computer the driver is not removed 1 Right click the My Computer icon on the desktop and then click Properties from the menu that appears System Properties appears Click the Hardware tab Click Device Manager The Device Manager window appears Click beside Network adapters Right click Intersil PRISM Wireless LAN PCI Card and click Uninstall from the menu that is displayed Confirm Device Removal appears Click OK Close System Properties Make sure that the icon has disappeared from the task tray in the lower right corner of the screen Click Start Settings Control Panel 10 Double click Add Remove Programs Add Remove Programs appears 11 Perform the following steps Click PRISM
39. RAM module y D gt 6 Attach the expansion RAM module slot cover as it was Attach the cover that was detached in step 3 Q Checking the size of the memory installed IMPORTANT If memory is not installed correctly the message Extended memory error appears or nothing is displayed on the screen when you turn on the computer In such a case turn off the main switch of your computer and reinstall the memory 1 Turn on the computer 2 Click the Start button and select Control Panel The Control Panel window appears SECTION 2 3 Click Performance and Maintenance and then System The System Properties dialog box appears 4 Make sure that the circled numerical value in the figure below has increased by the size of the memory you added Manufactured and supported by Fujitsu PC Asia Pte Ltd FUJITSU CO Intel R Pentium R Ill FUJITSU E GSS MB RAM Support Information OK Cancel The figure shows an example of the expansion of 256 MB of memory Depending on the system configuration the memory size displayed may be 1 MB smaller than the actual memory size 5 Click OK The Control Panel window appears again Critical Point Ifthe memory size displayed is incorrect check whether the memory is installed properly 45 6 Using a Mobile Multi bay Unit Q Cautions in using a mobile multi bay unit Take the following precautions when using a multi bay unit to avoid damage to it 46
40. Remove Programs Properties in the Control Panel 3 Select the Security Panel Application in the list and click Add Remove 4 When the Confirm File Deletion box appears click Yes Supervisor 1 Go to Start Menu Click on Control Panel 2 Open Add Remove Programs Properties in the Control Panel 3 Select the Security Panel Application for Supervisor in the list and click Add Remove 4 When the Confirm File Deletion box appears click Yes Reinstalling the Security Application Panel To reinstall supervisor or user security application you will need your Software Drivers CD where the programs is located at LifeBook_Options Security Panel It contains the setup files for supervisor and user security application 1 Double click the Setup SETUPS EXE file The Installing Security Panel Application window will appear Follow the instructions on the screen 2 Double click the Setup SETUP EXE file The Installing Security Panel Application window will appear Follow the instructions on the screen Supervisor and user passwords can be set by the Windows Software which are FISECS EXE and FJSECU EXE respectively FJSECU EXE for user password cannot run without supervisor password First you need to run FJSECS EXE to set supervisor password before setting user password Follow instructions under Setting Passwords The LifeBook Security Panel is designed to prevent theft or unauthorized access to your LifeBook It is important that you remember
41. Sharing 4 Click OK The printer sharing is set and the icon changes 62 After the network setting is completed access the shared drive on another computer to check the connectivity of the wireless LAN network m Accessing Another Computer Double click the My Network Places icon on the desktop My Network Places appears 2 Double click Computers near me The computers that are connected to the network are displayed 3 Double click the computer that you want to access The drive that you set with Sharing are displayed 4 Double click the drive that you want to access The drive is displayed showing its contents and made available to you a Checking the Connectivity 1 Click Start Settings Control Panel 2 Double click the PRISM Settings icon 3 Check the connectivity on the Link tab The current condition of connection is displayed Item Description State Shows the current condition of connection The MAC address of the other computer to which you are connected is displayed when the connection is successful If you are connected to more than one computer the computer that has the best connectivity is displayed Current Shows the current channel used for the connection Channel Current Tx Shows the current transfer rate in Mbits sec Rate Radio Off Click Radio Off to disconnect Radio On Click Radio On to connect to the network Rescan Click this button to sear
42. Specify Program NOTEPAD EXE Browse Go to Start Menu Detail IV Keep this button active even on Standby IV Keep this button active even on Shut down Set Password Cancel Apply SECTION 2 93 The Application Panel Setup utility will appear There are tabs that correspond to the application buttons on the LifeBook Application Panel When you receive your notebook these buttons are configured to launch specific applications Below is the example of applications associated with each button Label Button Function Default Application 1 Application A Notepad 2 Application B Calculator 3 Internet Internet Explorer 4 E Mail Outlook Express others email application Critical Points The tabs in Application Panel Setup may not be in the same order as the buttons on your LifeBook notebook Please carefully select the tab you wish to change To change an application associated with the Application A Application B or E mail buttons click on the tab for the button you would like to reconfigure for example Application A Click on Browse from Start Menu scroll down the list of applications click on the application you wish to launch with this button and then click OK The button will now launch the new application The Internet tab is different It comes set to launch your default Windows Internet browser Internet Explorer unless changed In order to reconfigur
43. TION KEYS Your LifeBook notebook has 12 function keys F1 through F12 The functions assigned to these keys differ for each application The FN key provides extended functions for the notebook and is always used in conjunction with another key FN F3 Pressing F3 while holding FN will toggle the Audio Mute on and off Fn F4 Pressing F4 while holding Fn will toggle the Quick Point feature on and off Note that the Fn F4 combination only works if Manual Setting is selected in the BIOS FN F6 Pressing F6 repeatedly while holding FN will lower the brightness of your display FN F7 Pressing F7 repeatedly while holding FN will increase the brightness of the display FN F8 Pressing F8 repeatedly while holding FN will decrease the volume of your LifeBook note book FN F9 Pressing F9 repeatedly while holding FN will increase the volume of your LifeBook notebook FN F10 Pressing F10 while holding FN allows you to change your selection of where to send your display video Each time you press the combination of keys you will step to the next choice The choices in order are built in display panel only both built in display panel and external monitor or external monitor only Z O F oO LW 2 There are eight brightness levels There are 17 audio levels ctrl key Used in combination with other keys Windows key Used to open the Start m
44. This indicator appears when the keyboard is set to ten key mode You can activate and deactivate the ten key mode by pressing the Num Lk key Caps Lock Indicator This indicator appears when the keyboard is set for all capital letters You can activate or deactivate the Caps Lock mode by pressing Gapstoc key Scroll Lock Indicator This indicator appears when the scroll lock is activated to avoid screen scrolling You can set and reset the scroll lock by pressing the SoL key while holding down the Fn key The operation varies depending on the application when this indicator appears D Security display Omm When a password is set with the accompanying Security Button this lights up when the password is required If the security display lights up when this computer s power is switched On or when it resumes operation input the password 11 Z e oO Ww 2 2 Pointing Device The Flat Point is a handy pointing device that enables you to move the mouse pointer freely with your finger It consists of a touch pad left and right buttons on this side of the touch pad and the scroll button between the left and right buttons The touch pad has the same function as the ball in a mouse You can move the mouse pointer in any directions on the screen by sliding the tip of a finger on the touch pad Moreover if you tap the touch pad with a finger you can click double click point to or d
45. ally upward to detach it from the lower slot Expanded RAM module slot DIMM1 40 4 Install a new RAM module in the lower slot Align the notch in the RAM module with the protrusion in the lower slot and insert it diagonally into the slot until it clicks into place Notch in the RAM module N Z Q F oO Lu Check to see that the memory is fastened securely by the tabs on both sides If a tab is in a state shown below the memory is not mounted correctly In this case further push the memory into the slot 41 5 Expanding Memory Preparing necessary items Memory Expanded RAM You can additionally install memory module Philips screwdriver Used to remove the screw securing the cover Use a Philips Size 1 screwdriver that meets the size of the screw M2 0 Using a screwdriver of other size may cause damage to the screw head QU Replacing memory A ELECTRIC SHOCK A Before replacing memory always turn off your computer and disconnect the AC adapter from it or you could get an electric shock SWALLOWING The cover cap screw etc removed could choke babies and children if they are Q swallowed accidentally To avoid danger of suffocation always keep them out of the reach of babies and children In the event any of these items is swallowed consult a doctor immediately 42 A FAILURE When replacing memory don t touch i
46. ame to all computers within the same network Infrastructure Network Specify workgroup name to connect to Table 14 Setting computer name and workgroup To change the setting click Change and follow the instructions on the screen System Properties appears again 5 Click OK When a message appears prompting you to restart the computer click Yes In this section you set sharing of the drive folder and printer You need to set this only when you are sharing files or a printer with other computers on the network When you share a drive folder or printer you can use these from any computer on the network a Setting File and Printer Sharing for Microsoft Networks 1 Click Start Control Panel Make sure the Classic View is selected 2 Double click the Network Connection icon Make sure that it is checked If it is not checked check it and click OK You do not have to perform the following steps Go to the next section Sharing Files If File and Printer Sharing for Microsoft Networks is not found in the list click Install and perform Step 5 and the subsequent steps When you click Install Select Network Component Type appears 5 Perform the following steps Click Service Click Add Select Network Service appears 6 Perform the following steps e Click File and Printer Sharing for Microsoft Networks e Click OK You will go back to Wireless Network Connectio
47. an 5 seconds between the end of one attempt and the beginning of the next attempt For Automatically answered Incoming Calls Incoming calls shall be answered between 3 and 30 seconds from the start of the ringing For correct operation the total of the RNs of all devices connected to a single line at anytime should not exceed 5 The RN of this Equipment is 0 5 WARNING Connection of Non Certified Approved peripherals may result in the equipment operating outside the New Zealand EMI Standards vi Note Modem setting in Windows 98 Windows Me The default modem setting in Windows 98 Windows Me operating system is United States of America If you are residing in Australia or New Zealand please choose the appropriate country where you are located The Modem will only operate with Tone Dialing Selection of Pulse dialing is not possible Please see below instruction for quick modem setup A If you are located in Australia its Please provide information about your curent location so that your calls can be dialed corectly Go to Control panel select modem icon ae What country region are you in now 2 Choose Australia in What country region are you in now Z What area or city code are you in now 3 Select Phone system as Tone Dialing i 4 Close If you dial a number to access an outside line what is it The phone system at this location uses Ionediaing Pulse dialing B If you are located in New
48. ars prompting you to restart the computer click Yes a Sharing In this section you set sharing of the drive folder and printer You need to set this only when you are sharing files or a printer with other computers on the network When you share a drive folder or printer you can use these from any computer on the network a Setting File and Printer Sharing for Networks 1 Click Start Settings Control Panel 2 Double click the Network icon The Network window appears 3 Click File and Print Sharing File and Print Sharing appears 4 Click and check one or both of the options 5 Click OK File and Printer Sharing for Microsoft Networks is added under The following network 56 a Sharing Files The following example shows how to set sharing the Work folder on the c drive 1 Double click My Computer C drive on the desktop 2 Right click the Work folder then click Sharing from the menu that appears The Work Properties window appears 3 Click Sharing and select items as specified in Table 4 Item Description Share Name Specify a share name for the drive or folder that you want to share N z F oO Lu Access Type Limits the read write permission for the drive to be shared e Read Only Password Specifies read only for the drive to be shared e Full Access Password Allows read and write for the drive to be shared Depends On Password
49. ary of Terms Used in This Document AdHoc A name of a wireless LAN configuration It is a type of communication using wireless cards only Another type of communication is called Infrastructure using a wireless card and an access point ADSL Asymmetric Digital Subscriber Line Technology for transporting high bit rate services over ordinary phone lines Channel A radio frequency band used for communication between wireless cards and access points DHCP Dynamic Host Configuration Protocol A protocol used to automatically acquire parameters required for the communication such as IP address The sender of IP address is called a DHCP server and the receiver is called a DHCP client DNS Domain Name System A function to control the association between the IP address and the name assigned to the computer If you do not know the IP address but if you know the computer name you can still communicate to that computer Encryption Key Network Key Key information used to encode data for data transfer This device uses the same encryption key to encode and decode the data and the identical encryption key is required between the sender and receiver IEEE 802 11b The U S IEEE Institute of Electrical and Electronic Engineers promotes standardization of LAN and its standards committee IEEE 802 11 has promoted 1 Mbps and 2 Mbps wireless LAN Currently another standards committee IEEE 802 11b is working for standardization of the f
50. aster 11 Mbps wireless Lan Infrastructure A name of a wireless LAN configuration This type of communication uses an access point Another type of communication is called AdHoc IP Address An address used for computers to communicate in the TCP IP environment Current IPv4 version 4 uses four values in the range between 1 and 255 Example 192 168 100 123 There are two types of IP address global address and private address The global address is an only address in the world A private address is an only address in theclosed network 79 N Z Q F oO Lu LAN Local Area Network A connection of computers within a relatively limited area such as the same floor or the same building MAC Address Media Access Control Address A unique physical address of a network card For Ethernet the first three bytes are used as the vendor code controlled and assigned by IEEE The remaining three bytes are controlled by each vendor preventing overlap therefore every Ethernet card is given a unique physical address in the world being assigned with a different address from other cards For Ethernet frames are sent and received based on this address MTU Maximum Transmission Unit The maximum data size that can be transferred at a time through the Internet or other networks You can set a smaller MTU size to obtain successful communication if you have difficulty transferring data due to the fact that the maximum size
51. ated below To do so would result in your modem being operated in a non compliant manner Call Attempts Retries Applications software shall be configured so that no more than 3 attempts are made to establish a connection to a given number Note if the modem can detect service tones up to 10 attempts can be made If the call sequence is unsuccessful there shall be a delay of at least 30 minutes before attempting to call the number again Failure to set the modem and any application software used with the modem to the values shown above will result in the modem being operated in a non compliant manner Consequently this would be in violation of the Labelling Notice for this equipment and the Telecommunications Act 1997 prescribes penalties for the connection of non compliant equipment NEW ZEALAND WARNINGS The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network It indicates no endorsement of the product by Telecom nor does it provide any sort of warranty Above all it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model nor does it imply that any product is compatible with all of Telecom s network services This equipmentis not capable under all operating conditions of correct operation at the higher speeds for which iti
52. ble clicked You did not enter the password when Windows 98 started You clicked Cancel or ESC when User Name Password window was shown Make sure that you enter user name and password and click OK when starting Windows 98 If you forget your password enter another user name A new user name and password is registered in the computer The network has not been set up correctly Check the setting for the protocol workgroup and sharing To check this you need a different procedure depending upon the operating system that you use Refer to the appropriate section of this manual It takes time before the network is searched and the computer connected is displayed Perform the following steps to search for the computer e Click Start Search Other Computers Enter the computer name that you are connecting to in Name and click Search Double click the icon of the computer that has been searched A failure in installing the driver Make sure that the driver is correctly installed The TCP IP protocol is not installed or the IP address is not set correctly Make sure that the TCP IP protocol is installed To check this you need a different procedure depending on the operating system that you use Refer to the appropriate section of this manual 70 Problem Possible Cause Possible Solution Other computers The TCP IP protocol is If the TCP IP
53. cally Windows 2000 Obtain an IP address automatically Windows XP Obtain an IP address automatically Critical Points A DHCP server is a server that automatically assigns IP addresses to computers or other devices in the network There is no DHCP server for the AdHoc network If the IP address is already assigned to the computer in the network ask the network administrator to check the IP address to be set for the computer If no access point is found in the network An IP address is expressed with four values in the range between 1 and 255 Set the each computer as follows The value in parentheses is a subnet mask lt Example gt Computer A 192 168 100 2 255 255 255 0 Computer B 192 168 100 3 255 255 255 0 Computer C 192 168 100 4 255 255 255 0 Computer X 192 168 100 254 255 255 255 0 77 N Z Q F oO Lu Specifications Technical Specifications for Integrated Wireless Lan Device Item Description Network Type IEEE 802 11b Transfer Rate 11 5 5 2 1Mbps auto change Frequency Range 2 400 2 483 MHz Channels One of 13 channels is used Card Type Non intelligent VCC Class B Security Network name encryption key Supported Operating Systems Windows 98 Windows 2000 Windows XP Power Current Max 350mA Maximum number of units recommended for wireless LAN AdHoc network 10 or less 78 Glossary QO Gloss
54. ch for others to connect to button Throughput Shows the actual transfer rate of the data transfer for send Tx and receive Bytes sec Rx Link Quality Shows either Excellent Good Fair Poor or Not Connected depending on the link quality Not shown for AdHoc connection Signal Shows either Excellent Good Fair Poor or Not Connected Strength depending on the signal strength Not shown for AdHoc connection Table 11 Checking the Connectivity 63 N z F oO Lu n Connecting Windows XP Systems This chapter describes how to set up the wireless LAN connection for computers that are running Windows XP Critical Points When you receive your LifeBook the integrated wireless LAN device and drivers have already been installed This procedure outlines the steps for setting the device parameters The proper setup of the wireless LAN connection requires that several steps be performed in the proper order Following is a general outline of the steps to be performed Each step is detailed later in this procedure 1 64 Setting parameters Setting the profile Setting the encryption Network settings Setting the protocol and checking the network Setting file and printer sharing e Checking the connection Click Start Control Panel Click Network and Internet connection Click Network connection A list of networks that are currently installed is displayed R
55. ch passes data between the CPU and the sub assemblies inside your notebook Byte 8 bits of parallel binary information Cache Memory A block of memory built into the micro processor which ins much faster to access than your system RAM and used in specially structured ways to make your overall data handling tine faster CardBus A faster 32 bit version of the PC Card interface which offers performance similar to the 32 bit PCI architecture CD ROM Compact disc read only memory This is a form of digital data storage which is read optically with a laser rather than a magnetic head A typical CD ROM can contain about 600MB of data and is not subject to be crashing into the surface and destroying the data when there is a failure nor to wear from reading 120 CMOS RAM Complementary metal oxide semiconductor random access memory This is a technology for manufacturing random access memory which requies very low level power to operate COMM Port Abbreviation for communication port This is your serial interface connection Command An instruction which you give your operating system Example run a particular application or format a floppy disk Configuration The combination of hardware and software that make up your system and how it is allocated for use CRT Cathode Ray Tube A display device which uses a beam of electronic particles striking a luminescent screen It produces a visual image by varying the position and intensity of
56. d trademark of Phoenix Technologies Corporation of the United States K56flex is a trademark of Rockwell International Corporation and Lucent Technologies Corporation Other product names are trademarks or registered trademarks of their respective companies Other products are copyrighted by their companies Copyright 1981 2001 Microsoft Corporation All rights reserved Copyright 2001 Phoenix Technologies Ltd All rights reserved All other products are trademarks or registered trademarks of their respective companies Explanations of the adjustments for the track pad cursor control are taken in part from the ALPS GlidePoint Driver User s Guide copyright by LCS Telegraphics in 1996 Copyright 2002 Fujitsu Limited All rights reserved No part of this publication may be copied reproduced or translated without the prior written consent of Fujitsu Limited No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu Limited Operations are subject to the following two conditions 1 This device may not be allowed to cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Wesbite www fujitsu pc asia com IMPORTANT SAFETY INSTRUCTIONS Read these instructions carefully Save these instructions for future reference Follow all warnings and instructions marked on the product Unplug this p
57. e it to launch another program follow these easy steps 1 Click on Other from the Internet browser box 2 Click on Browse from Start Menu 3 Scroll down the list of applications and the click on the application you wish to launch with this button 4 Click OK Application A Application B Internet E mail Specify which program starts when each specific button is pressed Specify the button action Start default Internet browser wi Connection Settings C PROGRA 1 INTERN Go to Start Menu Detail IV Keep this button active even on Standby IM Keep this button active even on Shut down Set Password 1 iexplore exe OK Cancel Apply 94 The button will now launch the new application If you want to return to launching your Windows default Internet browser with this button you need only click on Default Internet Browser from the Internet browser box Be aware that you will erase the settings for the other application If you wish to go back to launching the other application from this button you will need to reconfigure it as described above When you have finished with Application Panel Setup click on OK and the new settings will take effect You can reconfigure your LifeBook Application Panel as often as you like Critical Points The Internet or E mail buttons can be configured to launch any application you wish not just an Internet browser or e mail progra
58. ed one bit at a time on a single wire with any other wires only for control of the device not for transfer of data Shadow RAM A technique of copying data or applications stored in ROM Read Only Memory into RAM Random Access Memory for access during actual operation RAM is much faster to access than ROM however ROM contents are not lost when power is removed Shadowing allows permanently stored information to be rapidly accessed 125 o z F oO Lu SMART Self Monitoring Analysis and Reporting Technology SMART is an emerging technology that provides near term failure predictions for hard drives When SMART is enabled the hard drive monitors predetermined drive attributes that are susceptible to degradation over time If a failure is likely to occur SMART makes a status report available so that the LifeBook can prompt the user to back up the data on the drive Naturally not all failures are predictable SMART predictability is limited to those attributes which the drive can self monitor In those cases where SMART can give advance warning a considerable amount of precious data can be saved SRAM Static random access memory A specific technology of making RAM which does not require periodic data refreshing Status Indicator A display which reports the condition of some portion of your hardware On your notebook this is an LCD screen just above the keyboard Stereo audio A system using two channels to process s
59. ee When dialing fom this location use the following rules 5 Click OK and Apply To access an outside line for local calls dial To access an outside line for long distance calls dial Use this carrier code to make long distance calls Use this carrie code to make intemational calls To disable zall waiting dial Dialusing Tone O Pulse OK Cancel Apply Note The screens and illustrations shown in this examples may slightly vary depending on the operating environment that you have installed viii NOTATION IN THIS DOCUMENT Warnings This manual uses a variety of icons as visual marks so that you can use this computer safely and correctly and avoid damage and danger to yourself and to others These icons and their meanings are as follows Please learn these icons before reading this manual Learning these icons will be useful for understanding this manual Icon Meaning A WARNING Incorrect handling ignoring this warning can cause a dangerous situation that could result in death or severe injury A CAUTION Incorrect handling ignoring this warning can cause a dangerous situation that could result in moderate or minor injury or could result in equipment damage The symbols below are used together with the icons above to indicate what type of danger or damage is involved symbols Meaning The symbol A indicates warning or caution The symbol A indicates the concrete nature of the
60. enter with a slightly moistened cloth then with a dry cloth Don t use a hairdryer to dry it or don t leta wet disc dry naturally Don t use benzene thinner water record cleaner antistatic spray or silicone cloth to clean discs Always keep discs in their cases when they are not in use Don t bend a disc or put any heavy object on top of it Don t store discs in an extremely hot or cold place CD ROM audio CD DVD ROM video CD DVD VIDEO photo CD Reading playback 1 Note that some types of discs cannot be used with your computer or application software may be required to play them 2 DVD ROMs refer to DVDs containing information including programs with which you can see the data on computer displays DVD VIDEOs refer to DVDs on which sound and pictorial data are recorded DVD RAM DVD RW DVD RW or DVD Audio discs cannot be used with your computer 30 When you purchase CD R RW discs be sure check whether they meet the data writing and rewriting speeds of your drive Critical Points Don t use CDs or DVDs other than round discs e g deformed discs including star shaped discs and card type discs Data cannot be read written correctly from on a deformed disc or a deformed disc could cause the CD DVD drive to fail The region code of your computer s DVD drive is 3 DVD VIDEOs with a country specific region code may not be used with your drive if their region codes don t agree with t
61. enu D Alt key Used in combination with other keys 15 Application key Used to open the pop up menu for the item selected This key has the same function as the right button of the Flat Point Home key Cursor keys Used to move the cursor to the beginning of the line on which it is currently placed To do so press the J key while holding the Fall key down Pressing the E key while holding the tD and Fall keys down causes the cursor to move to the beginning of the text D Pg Dn Page Down key Cursor keys Used to display the next page To do so press the Dl key while holding the Fall key down Used to move the cursor upward downward to right and left 17 18 End key Cursor keys Used to move the cursor to the end of the line on which it is currently placed To do so press the E key while holding the Fal key down Pressing the E key while holding the Ci1 and Fal keys down causes the cursor to move to the end of the text Used to move the cursor upward downward to right and left Q About the ten key mode The ten key mode refers to the mode that enables you to use certain character entry keys as ten keys a key arrangement that makes it easy to type in figures To activate the ten key mode simply press the Nm1k key In the ten key mode is displayed on the status indicator LCD The figure you can enter with a ten key is marked on the front surface of the key Note that connecting an optional ten
62. ettings Lx tH Important Mail sound GV E MailNotificationLED E Auto Mail Check B Mail Check Interval Connection Alter checking mail Special recipient Set Up your account that checking for a new mail How to connect to the Internet Default Connection ipee Configure Incoming Mail Sever POP Mail Server pop mailservername com Port No fra Account Jabe Password Test Current Connection Cancel Apply 96 e If LAN Click on LAN Enter the POP3 Server name your account name and password for that account Consult your Service provider if you do not know or are unsure of the information requested e If Dial Up Click on Dial Up Choose the Dial up configuration as previously set in Dial Up Networking you wish to retrieve mail from Enter the POP3 Server name your account name and password for that account The account name and password should be the same information you entered in the Dial Up configuration After all the information has been entered test the connection by clicking on Testing connection with current setting If an error occurs check the settings and information on Dial Up Network and E mail LED notification N E _ gt e Checking for connection now Connection successful T 3 m 5 Cancel After the setup Dial Up Networking E mail is completed you are ready to retrieve mail When you press the E mail button your
63. f temperature changes etc Status indicator LCD Displays the operating status of the computer Built in microphone Used for sound recording 2 Critical Points The microphone may cause a howling noise when you are using for example a karaoke software program for which the microphone needs to be used along with the internal speakers If howling occurs adjust the volume on your computer or use commercially available headphones or an external microphone When the microphone is not in use you should cut it off mute The built in microphone may not pick up all the sounds depending on the distance or direction from the sound source It is recommended that you use an external microphone if you want to record sounds clearly r z F oO Lu n One touch buttons Security panel These buttons are used to set reset security lock password input during power on of the PC unit and application start up O SUS RES Suspend Resume switch Used to turn on your computer to put it into standby suspending operation mode or to resume system operation QO Speakers A sound output device of the computer Q Keyboard Allows you to type in letters and give commands to the computer Fiat Point Used to move the mouse pointer on the screen The scroll button at the center allows you to scroll a window up or down Critical Points For some applications windows may not be scrolled using the scroll button Latc
64. fer to the manual that comes with the access point Key Format Click the down arrow and select the input for the Network key ASCII characters Select this when using ASCII characters for the Network Key Characters that can be used follow 0 9 A Z a z and _ underscore Example To set the key to ABC12 input ABC12 Hexa decimal characters Select this when using hexadecimal characters for the Network Key Use this if there is a wireless LAN card in the network that has the Network Key set to a character code In Network Key input the same value as the other wireless LAN card Table 12 Setting parameters 8 When you finish your entry click OK Wireless Network Connection 2 Properties appears again 9 Make sure the network name you specified for the The section describes how to set the network connection for a computer running Windows XP Q Network Settings In this section you set TCP IP Settings and complete Checking Computer Name and Workgroup required for the network connection TCP IP Settings 1 On Wireless Network Connection Properties click General 65 N Z Q F oO Lu 2 Critical Points if Wireless Network Connection 2 Properties is not displayed click Start Settings gt Control Panel and double click the Network Connection icon Right click the Wireless Network Connection and then click Properties fr
65. g an object move the mouse pointer onto the object move the object to the desired location by sliding the finger on the touch pad while holding the left button down and then move the finger off the pad Or move the mouse pointer onto the object and tap the touch pad twice in a row After that without moving the finger off the pad slide it to move the object to the desired location and then move the finger off the pad To scroll a window click anywhere in the window and push the scroll button forward or backward to scroll the window 13 Z e oO Ww Critical Points You can change the functions assigned to the right and left buttons and also adjust the mouse speed using the Mouse Properties dialog box To display this dialog box click the Printers and other hardware icon in the Control Panel window and select Mouse When tapping the touch pad tap it quickly with the tip of a finger but not strongly The mouse pointer moves in the same direction as you slide a finger on the touch pad If the finger reaches one edge of the pad before you move the pointer to the desired location move the finger off the pad temporarily put it in an adequate place on the pad and start sliding the finger again Q Using the scrolling function 1 The scroll button enables you to easily scroll a window Click any place in the area of the window that you want to scroll File Edit View Favorites Tools Help Q B
66. h This latch locks the liquid crystal display LCD to avoid accidental opening Press it to unlock and open the LCD Q Top of the PC Main Unit oe SZ 1 Built in wireless LAN antenna for models with a wireless LAN module Your PC came with a built in LAN antenna Note Wireless LAN ugradeability is only applicable to selected countries Please contact your local sales representative for more information Critical Points When using your PC especially when using the build in wireless LAN module for communication take care not to touch the antenna To avoid degradation in communication quality do not place your PC close to a conductor substance that allows electricity to pass along or through it 0 Left panel of the computer Z e oO Ww Mobile multi bay Your computer came with a Combo Drive DVD amp CD RW or CD RW drive built into this bay Depends which model you have Critical Points To avoid damage to your computer do not use the computer when the mobile multi bay is vacant Mobile multi bay unit release lever Raise the lever when removing the unit from the mobile multi bay Antitheft lock port Used to connect a commercially available antitheft cable Critical Points The antitheft lock port supports the Kensington s Micro Saver Security System When an anti theft lock is connected the mobile multi bay unit cannot be removed Q Right panel of t
67. hat of your drive Some DVD discs are copy protected for copyright protection Your computer has Descramble and Authentication features to prevent unauthorized duplication of DVDs so that if data protected by copyright is copied it cannot be played because of an authentication error N Z Q F oO Lu 31 IMPORTANT You should preferably power the computer from the AC adapter when frequently accessing a CD or playing back a DVD VIDEO To set a disc on the disc tray align the center of the disc with the projection at the center of the tray and push the disc down until it clicks into place Otherwise it may come off in the drive causing damage to the disc tray and drive or the disc itself When you are using a disc that starts automatically when it is loaded don t put your computer into standby mode If you place the computer into standby suspending operation mode while using an auto run CD the CD will start twice when you resume system operation when you restore the operation at the point at which you suspended operation and this could cause the computer to malfunction If you let the CD start twice exit all programs on the CD and load it over again When data is being read the CD DVD runs at very high speeds and sometimes causes vibration and hiss noise 1 Press the CD eject button The disc tray pops out a little CD eject button 2 Pull out the tray gently 32 Critical Points Ift
68. have changed the setting Close is shown instead Click Close 61 a Sharing Files The following example shows how to set sharing the Wor k folder on the c drive 1 On the desktop double click My Computer C drive 2 Right click the Wor k folder then click Sharing from the menu The Work Properties window appears 3 Click Share this folder and set necessary items as indicated in the following table Item Description Share Name You can specify a share name for the drive or folder that you want to share Comment You can enter the description for the drive or folder that you want to share User limit Specifies the limit for the number of sharing users Table 9 Sharing Files 4 Click OK The folder is set shared and the Work folder icon changes Q Printer Sharing 1 Click Start Settings Printers The Printers window appears showing the printers that are connected 2 Right click the printer that you want to share then click Sharing from the menu that appears 3 Click Sharing and select necessary items Item Description Not Shared Disables printer sharing Shared As Enables printer sharing Share Name Specifies a share name of the printer to be shared Comment Enter the description of the printer to be shared Passwords If you specify a password you need to enter it when using the printer Table 10 Printer
69. he computer HEARING LOSS Before connecting a cable to the headphone jack LINE IN jack or microphone jack lower the volume on the computer to a minimum by pressing the F8 key while holding down the Fn key Otherwise the device connected could sustain damage or a very loud noise could impair your hearing Air Vents This is the air ventilation hole Microphone jack Used to connect a commercially available monaural microphone with a f3 5 mm mini plug for sound recording Some types of microphones e g dynamic microphones cannot be used with your computer So before purchasing a microphone make sure it is compatible with your computer LINE IN jack This is an analog input LINE IN terminal used to connect the computer to the LINE OUT terminal of an AV system with a 3 5 mm stereo mini plug 4 Headphone jack Used to connect commercially available headphones with a f3 5 mm mini plug Headphones with some types of plugs cannot be connected So before purchasing headphones make sure they are compatible with your computer A HEARING LOSS e Don t raise the volume too high especially when you are listening with headphones Listening to very loud sound for a long time could impair your hearing r z F oO Lu HEARING LOSS Don t turn on or off the computer while you are wearing headphones or noise could impair your hearing 6 Modem p
70. he tray does not come out If you have already shut down Windows turn your computer back on and press the CD eject button Ifthe main switch is in the Off position O slide it to the position to turn on the computer and then press the CD eject button You may press the CD eject button even when the amp icon is blinking on the status indicator LCD 3 Seta disc on the tray while holding the tray Align the hole of the disc with the projection at the center of the tray with the labeled surface up and push the disc down until it clicks into place Failure to fit a disc correctly onto the projection could prevent the disc from being ejected N Z Q F oO Lu Disc tray Projection 4 Push the tray gently into the computer It takes about 10 seconds for your computer to get ready to start the loaded disc 33 Critical Points If a message appears asking you what to do If a disc containing this kind of file is inserted Click No and click OK When you load a multi session CD it may take much time for your computer to get ready to start If you insert an audio CD in your computer while Windows is running CD Player application starts automatically to play it You can use the one touch buttons or CD Player to perform the following operation Exit the application you started from the disc Press the CD eject button The tray pops out a little 34 CD eject button 3 Pul
71. ight click Intersil PRISM Wireless LAN PCI Card in the list and click Properties from the menu that is displayed Wireless Network Connection 2 Properties appears Click the Wireless Networks tab The Wireless Networks tab appears Perform the following steps Make sure that Use Windows to configure my wireless network settings is checked e Click Add under Preferred networks Wireless Network Properties appears Set parameters e For the AdHoc network specify the same value to all the computers for which the encryption key is used for connection For the infrastructure network specify the encryption key network key with the same value to the encryption key of the access point For how to check the encryption keys set for the access point refer to the manual supplied with the access point Critical Points Be sure to specify the encryption keys If you do not specify the keys any computer with a wireless LAN card can be connected This presents a risk that other users may steal or destroy your data Item Description Network Name SSID Enter the network name to which you want to connect This is a required item For the network name ask your LAN administrator AdHoc network Set the same name for all of the computers that are to be connected Infrastructure network Specify the same name as that specified on the access point that is to be connected For access point instructions re
72. is composed of parts very sensitive to static electricity and it may be damaged even by static built up in a human body Before handling a PC card always touch a metal object with your hand to discharge static You should pay attention to the following points when you use PC cards in order to prevent failure e Avoid exposing PC cards to direct sunlight or high temperature e Avoid subjecting PC cards to shocks Do not place heavy objects on top of them Avoid getting PC cards wet Store PC cards in their cases when not in use Q PC cards that can be used with your computer Your computer is compatible with PC Card Standard compliant Type PC cards and Type II PC cards Here are some examples of these types of cards Adapter card This PC card is needed to load pictorial data from a smart media for digital cameras into the computer e SCSI Card This PC card is needed to connect a SCSI device such as a SCSI hard disk or MO Magneto Optical drive Critical Points Your computer does not support PC cards with a working voltage of 12V Q Preparing necessary items Prepare a PC card that meets your need PC card driver ACD or floppy disk that contains the PC card driver is supplied with some PC cards Manual of the PC card Setting procedures vary depending on the PC card used So be sure to read also the manual of your PC card 25 N Z Q F oO Lu 26 A INJURY Do not put your finger i
73. is port 4 DC IN connector This is the connector to connect the AC adapter supplied to the computer O Wireless switch Turns on or off the communication feature using the wireless LAN module Slide the switch to the right to turn on the wireless LAN module or to the left to turn it off Always keep the switch in the OFF position in a hospital on an airplane or where the use of electronic devices is restricted O External display connector Used to connect an optional external display such as a CRT display 8 IMPORTANT When you connect peripheral devices to each corresponding connector confirm the correct direction of the connector and insert directly into the connector Z O oO L 2 1 Port Replicator Connector This connector allows you to connect the Port Replicator to your notebook 2 Expansion RAM Random Access Memory module slot The memory module on your computer is installed here If needed you can increase the amount of memory by replacing the memory module Release button Slide this button to unlock the internal battery pack O Internal battery pack lock Slide this to install or remove the internal battery pack 6 Internal battery pack An internal battery pack is installed here SOPETEAARAon I tol l 0O00 00090 Critical Point
74. istrator to check the setting AdHoc Network Select IP address and enter a value for IP address and Subnet Mask e Infrastructure Network Select Obtain an IP address automatically Click OK Network appears again In the next step you will check the computer name and workgroup Checking the Computer Name and Workgroup Click the Identification tab on the Network window Critical Points If this tab is not found on the Network window click Start Settings Control Panel and double click the Network icon Check the entry for Computer name and Workgroup Ask your network administrator and check the setting if you have a network administrator 55 Item Description Computer A name to identify the computer on the network You can specify any name Name for any computer Use up to 15 single byte characters For easiest identification use the model name or user name Workgroup The name of the network group Use up to 15 single byte characters AdHoc Network Specify the same name to all computers within the same network Infrastructure Network Specify a workgroup name to connect to Computer Additional description for the computer This is not necessary Description Table 3 Computer Name and Workgroup Critical Points Including a period or other special characters may prevent you from connecting to the network 3 Click OK When a message appe
75. k Start gt Programs Accessories Command Prompt Windows XP Click Start All Programs Accessories gt Command Prompt Type ipconfig gt directory filename where directory and filename represent the location at which you want to find the IP address Click Enter then go to the location you specified above The IP address for your system will be contained in the file To check that your IP address is functioning properly go back to the DOS prompt and type ping lt P address gt then press Enter You will receive several replies followed by the PING statistics similar to below To check that your system is communicating with other systems go to the DOS prompt and type gt ping XXX XXX XXX XXX With the destination IP address in place of XXX XXX XXX XXX Example if the destination IP address is 10 0 1 3 C sping 10 0 1 3 A message similar to the following appears if the connection is successful Pinging 10 0 1 3 with 32 bytes of data Reply from 10 0 1 3 bytes 32 time 1ms TTL 32 Reply from 10 0 1 3 bytes 32 time lt 10ms TTL 32 Reply from 10 0 1 3 bytes 32 time 4ms TTL 32 Reply from 10 0 1 3 bytes 32 time lt 10ms TTL 32 If the connection fails Request timed out Destination host unreachable or a similar message appears In this case refer to the Other computers are not displayed portion of this chapter Problem Possible Cause
76. l Ac Add to Other Recipients SECTION 2 There is an icon like envelop appear on the taskbar When you received the email from the special recipients that you configure KI My Computer We Om Zor 99 To configure Important Mail Only applicable for CoolView Panel model This function allow you to change the icon color on the taskbar to notifies you that an important mail comes E Mail Account Settings x Auto Mail Check 53 Mail Check Interval DA Connection After checking mail Special recipient 2 Important Mail sound QE MaiNotification LED Reo time an important mail comes Application Panel so notifies by changing your CoolView s backlight Backlight Color Green Cancel Apply To configure Sound This allow you to change the LifeBook Application icon s color on the taskbar and beeps each time you receive a new message E Mail Account Settings FA Auto Mail Check SB Mail Check Interval DA Connection wf E Mail Notification LED a After checking mail Special recipient th Important Mail a Sound Changes the LifeBook Application Panel icon s color on the taskbar and beeps each time you receive a new massage Specify a ring pattern for selected color BZ BR BR E Green Orange Red V Beeps when mail incoming notice A ting pattern for mail incoming notice C Proaram Files Fujitsu Application Pa Browse Play Sound Cancel
77. l ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating Also make sure that the total rating of all products plugged into the wall outlet does not exceed 15 amperes Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points that could result in a fire or electric shock Never spill liquid of any kind on the product Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage points or other risks Refer all servicing to qualified service personnel Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power cord or plug is damaged or frayed b If liquid has been spilled into the product c If the product has been exposed to rain or water d If the product does not operate normally when the operating instructions are followed Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition e If the product has been dropped or the cabinet has been damaged f If the product exhibits a distinct change in performance indicating a need for service CAUTION When replacing the battery be sure to insta
78. l out the tray gently SECTION 2 Critical Points Ifthe tray does not come out If you have already shut down Windows turn your computer back on and press the CD eject button If the main switch is in the Off position O slide it to the position to turn on the computer and then press the CD eject button You may press the CD eject button even when the amp icon is blinking on the status indicator LCD 4 Take out the disc while holding the tray with a hand To detach the disc lift the edge of the disc while holding the projection with a finger Disc tray Projection 35 5 Push the tray gently into the computer Critical Points Ifthe disc won t come out 1 Click the Start button and select My Computer 2 Move the mouse pointer onto the CD Drive icon in the My Computer window 3 Press the right button once on the Flat Point 4 Click Eject The tray pops out a little 5 Pull out the tray gently and take out the disc from it If you cannot eject the disc by this method follow these steps 1 Turn off your computer 2 Insert a straightened paper clip etc into the pinhole on the right of the CD eject button The tray will pop out a little 3 Pull out the tray gently and take out the disc from it CD eject button 36 4 About Memory U Installing removing memory This section explains how to install remove memory in or from your PC A ELECTRIC SHOCK e To avoid shock
79. lay cable connector has a trapezoidal cross section Adjust the orientation of the connector 1 insert the cable connector and 2 secure the display cable with the screws on both sides of the connector External display connector Display cable 3 Connect the display cable to the CRT display For the way to connect the cable refer to the manual for your CRT display 4 Plug the power cable of the CRT display in a wall outlet and turn it on 5 Connect the AC adapter to the computer turn it on and then switch displays Switching displays Critical Points The following may take place when you turn on your computer for the first time after connecting an external display to it Images are displayed on both the computer s LCD display and the external display The Add New Hardware Wizard dialog box appears In this case follow the on screen instructions to install the display driver 108 SECTION This section explains what to do when trouble occurs with this computer and when messages are displayed Read this section as the necessity arises o z F oO Lu 1 When This Happens When you are having trouble with this computer there is something you think is strange or there is something you want to do but do not know how This section is divided into related items The power does not come on Checkpoint Cause and Solution Is the AC adaptor connected When using this comp
80. layed in English or nothing will be displayed on the screen when you first turn on your PC after installing the memory If this happens turn off the main switch of your PC and remove and reinstall the memory correctly SECTION 2 Q Removing memory 1 Turn off your PC and disconnect the AC adopter from it 2 Close the LCD panel and place your PC upside down 3 Remove two screws and detach the expanded RAM module slot cover Detach the expanded RAM module slot cover on the bottom of the PC 4 Remove the memory Detach the RAM module from the slot while opening in opposite directions both tabs fastening the RAM module as shown in the figure below Tab upper slot Expanded RAM module slot DIMM2 39 5 Attach the expanded RAM module slot cover and secure it with screws Reattach the cover removed in Step 3 Expanded RAM module slot cover me Critical Points To replace the memory in the lower slot follow these steps 1 Open the tabs on both sides of the lower slot in opposite directions as shown in the figure below This causes the memory to come up slightly Tab upper slot 2 Similarly open the tabs on both sides of the upper slot This causes the memory to come up further Detaching the memory forcibly without releasing the tabs on both sides of the upper slot could damage the tabs To avoid this be sure to release them when removing the memory 3 Detach the memory Pull the memory diagon
81. le the Flat Point before connecting a USB mouse to your computer 103 Critical Points Even when you disable the Flat Point by pressing the Fah key while pressing down the Fall key the Flat Point is enabled after restarting or resuming operation of the computer To disable it you need to press the Fa key again while holding the Fall key down The Flat Point can be turned on and off manually only when the Internal pointing device item is set to Manual under Keyboard Mouse Settings in the BIOS Setup Advanced Menu If the Manual option is unselected select it If you set the Internal pointing device item of the Keyboard Mouse Settings in the BIOS Setup Advanced Menu to Always disabled the Flat Point is always disabled 3 104 14 Printer This section describes connection of a printer to the parallel connector on the connector box With a printer you can print the documents and images that are generated on the PC Critical Points Ifthe printer is one corresponding to USB connection the USB connector can also be used for connection N Z Q F oO Lu A ELECTRIC SHOCK To connect remove a printer be sure to switch the PC power off and disconnect the AC adapter beforehand Otherwise you may undergo an electric shock A FAILURE Q When connecting cables read this manual well to avoid misconnection If the PC is used with a wrong connection the PC and o
82. ll it with the polarities in the correct position There is a danger of explosion if the battery is replaced with an incorrect type or is mistreated Do not recharge disassemble or dispose of in fire Replace only with the same or equivalent type recommeded by the manufacturer Dispose of the used battery according to the manufacturer s instructions Use only the proper type of power supply cord set provided in your accessories box for this unit It should be a detachable type UL listed CSA certified BS1363 ASTA SS145 certified rated 10A 250V minimum VDE approved or its equivalent Maximum length is 15 feet 4 6 meters High Safety Required Use This Product is designed developed and manufactured as contemplated for general use including without limitation general office use personal use household use and ordinary industrial use but is not designed developed and manufactured as contemplated for use accompanying fatal risks or dangers that unless extremely high safety is secured could lead directly to death personal injury severe physical damage or other loss hereinafter High Safety Required Use including without limitation nuclear power reactioncore control in nuclear atomic facility airplane automatic aircraft flight control air traffic control operation control in mass transport control system medical instrument for life support system missile launching control in weapon system You shall not use this Product with
83. llow you to set up printer sharing without using the Network Setup Wizard N 3 Click If you understand the security risks but want to share printers without running the wizard click here Enable Printer Sharing will be displayed 4 Select Just enable printer sharing 5 Click OK The printer properties will be indicated 6 Select Share this printer 7 Enter the sharing printer name in Share name 8 Click OK The printer will be shared and the printer icon will become a sharing icon 68 After the network setting is completed access the shared drive on another computer to check the connectivity of the wireless LAN network a Accessing Another Computer 1 Click Start My Computer 2 From the left menu in Other Places click My Network Places 3 From the left menu in Network Tasks click View workgroup computers The workgroup in which you are participating will appear 4 Double click the computer to which you want to connect The drive that you set in Computer Sharing appears 5 Double click the drive to which you want to connect The contents of the drive will appear and is available for use a Checking the Connectivity 1 Click Start Control Panel 2 Double click the PRISM Settings icon PRISM Wireless Setting appears 3 Check the connectivity on the Link tab The current condition of connection is displayed Item Description State Shows the curre
84. lock Release the lock by sliding the port replicator removal lever 3 Remove the port replicator While keeping the removal lever in the unlocking position 1 lift the side having the connector first 2 then the other side of the PC 3 to remove the port replicator 50 8 About the Integrated Wireless Lan For selected model Thank you for purchasing a Fujitsu LifeBook with an Integrated Wireless LAN This manual describes the basic operating procedures for the Wireless LAN referred to as the device in this manual and how to set up a wireless LAN network Before using this device read this manual carefully to ensure correct operation of the device Keep this manual in a safe place for reference while using the device Q Characteristics of the Device This device consists of a wireless LAN card that is attached to the computer via a mini PCI slot The main characteristics are as follows Ituses the power saving communications system in the 2 4 GHz band and does not require any license for radio communication e It uses Direct Sequence Spread Spectrum DS SS which is resistant to noise The Wireless LAN Mini PCI module complies with Wi Fi and is able to communicate at the maximum transfer rate of 11 Mbps The maximum communication range is approximately 80 feet 25 meters inside a building The range may be shorter depending upon the installation factors such as walls and columns e Unauthorized access ca
85. m Enabling disabling Application Launcher button Select Models Only At the bottom of each application setup page are two selectable options The first will Keep this button active even on Standby and the second will Keep this button active even on Hard Drive Timeout You can enable disable either or both of these functions simply by check or unchecking the check Box Fa LifeBook Application Panel x Application A Application B Internet E mail Specify which program starts when each specific button is pressed Specify the button action Start a Program Specify Program CALC EXE Browse Go to Start Menu Detail IV Keep this button active even on Standby IV Keep this button active even on Shut down Set Password oK Cancel Apply 95 SECTION 2 Critical Points The E mail Notification LED is available on select LifeBook notebook models only Touse the E mail LED notification you must have access to a POP3 Server with no Security Password Authentication Contact your service provider to determine if they support POP3 without Security Password Authentication Connection To configure the E mail Account Settings Click on Start Click on Control Panel Click on Application Panel Click on the E Mail tab Click on E Mail Account Settings The E Mail Setup screen appears Choose the type of connection LAN or Dial Up Pa Ponsa Fo E Mail Account S
86. mputer by pressing keys is indicated as follows Example dir c T In the position indicated in the example above by the the space left between the characters indicates that a space needs to be left in the entry by pressing the space bar the long key with nothing written on it at the center of the front of the keyboard Commands are written in this manual as lowercase latin letters but uppercase letters may be used Product names The following product names are abbreviated as follows in this manual Microsoft Windows XP operating system is written as Windows XP Microsoft Windows 2000 operating system is written as Windows 2000 Microsoft Millennium Edition operating system is written as Windows Me Microsoft Windows 98 operating system is written as Windows 98 Windows NT 4 0 and Windows NT 3 51 are both written as Windows NT LifeBook is written as this computer or the computer main unit Configuration of this Manual This section explains basic operations and basic items for using this computer including the names of the parts and their functions flat point operation methods floppy disk unit handing and battery operation This section explains installation of options for this computer This section explains what to do when trouble occurs with this computer and when messages are displayed Read this section as the neces
87. n 2 Properties and File and Printer Sharing for Microsoft Networks is added to the list 7 Click Close 67 N z Q F oO Lu a Sharing Files The following example shows how to set sharing the Wor k folder on the c drive 1 Click Start My Computer 2 Double click the Local Disk c icon 3 Right click the Wor k folder and then click Sharing and Security from the menu that appears Work Properties appears 4 Click If you understand the security risks but want to share files without running the wizard click here Critical Points If you have already clicked If you understand the security risks but want to share files without running the wizard click here this window does not appear In the Work Properties window the description under Network Sharing and security changes 5 Check Share this folder on the network Uncheck Allow network users to change my files if the shared folder is for read only 6 Click OK The folder is set shared and the Work folder icon changes Q Printer Sharing Right click the printer to be shared and click Sharing from the menu that appears The properties of the printer to be shared will be displayed Set printer sharing On the display the printer sharing setting is recommended by the Network Setup Wizard but for the wireless LAN network security is maintained by network name SSID or network key The following steps a
88. n Number 2 five times and press Enter button The LifeBook will boot to normal operation From Suspend State 1 Press your Suspend Resume button 2 When the Security Indicator flashes enter the password and press Enter button The LifeBook should resume normal operation Incorrect Password Entry If an invalid supervisor or user password is entered three times in succession the system will beep for about one minute If a valid password is entered within a minute while system beeps the beeping will stop and the LifeBook will resume normal operation If no or an invalid password is entered while the system beeps the system will return to its previous locked state suspend or off and the Security Indicator will go off To reactivate the LifeBook after a password failure you must press the Suspend Resume button then enter a correct password 90 Critical Points Remember the user password you specified on the Security Panel Application If you forget the password you will not be able to use your computer The supervisor password can override the user password Opening and Closing the Cover Closing the cover automatically places the LifeBook into suspend mode Opening the cover does not automatically place the LifeBook into normal operation Instead you must enter the proper security password after pushing the Suspend Resume button N Z Q F oO Lu Low Battery Operations If your LifeBook has low batter
89. n area where a clock is displayed Safely Remove Hardware nee 2 bey 11 07 PM 3 Select the device you want to unplug or eject and then click Stop XXX refers to the name of the mobile multi bay unit currently in use lt gt Safely Remove Hardware N Z Q F oO Lu O Select the device you want to unplug or eject and then click Stop When T Windows notifies you that it is safe to do so unplug the device from your computer Hardware devices BCom 03 XXX D at Location 1 Properties Stop Display device components Close 4 Remove the unit 1 Raise the mobile multi bay unit release lever and 2 Safely pull out the DVD CD RW drive 47 5 Press the SUS RES button The computer goes into Suspend mode 6 Install a new unit Push in the unit as far as it will go with the connector mounted face facing forward S 7 Press the SUS RES button again to resume operation IMPORTANT To avoid damage to your computer always use it with a mobile multi bay unit installed in the bay e Raise the mobile multi bay unit release lever only when removing the mobile multi bay unit If you raise the lever by mistake the lock may be released In such a case turn off your computer remove the unit and reinstall it 48 7 Port Replicator The port replicator is described here IMPORTANT e The port replicator can be installed removed regardless of the condition of the P
90. n be prevented with the use of SSID and encryption key U Using This Device AdHoc Mode The AdHoc Mode refers to the network connecting two computers using wireless LAN cards This connection is called an AdHoc network Using an AdHoc network you can obtain a network connection easily and at a low cost In the AdHoc mode you can use the function supported by Microsoft Network such as File and Print Sharing to exchange files and share a printer or other peripheral devices To use the AdHoc Mode you must set the same SSID and the same encryption key for all the computers that are connected All connected computers can communicate Q Infrastructure Mode If a number of computers are connected simultaneously in the AdHoc mode the transfer rate may be reduced communications may become unstable or the network connection could fail This is because all wireless LAN cards are using the same radio frequency in the network To improve this situation you can use a wireless LAN access point which is sold separately The wireless LAN network is in the Infrastructure mode when it uses an access point and such a connection is called the Infrastructure Network By using an access point you can set and use a different communication channel for each network group Each channel is given a different radio frequency and it eliminates the collision of communications and provides a more stable communications environment Infrastruc
91. nd and model of device in order to produce the desired results from that particular equipment ECP Extended Capability Port A set of standards for high speed data communication and interconnection between electronic devices ESD Electro Static Discharge The sudden discharge of electricity form a static charge which has built up slowly Example the shock you get from a doorknob on a dry day or the sparks you get form brushing hair on a dry day 123 ie z F oO Lu Extended Memory All memory more than the 640KB recognized by MS DOS as system memory FCC Federal Communication Commission Floppy Disk A spinning platter of magnetic data storage media which is highly flexible GB Gigabyte Hard drive A spinning platter of magnetic data storage media where the platter is very stiff Hexadecimal A decimal notation for the value of a 4 bit binary number 0 9 A B C D E F Example 2F in hexadecimal 00101111 47 in decimal vO Input Output Data entering and leaving your notebook in electronic form O Port The connector and associated control circuits for data entering and leaving your notebook in electronic form IDE Intelligent Drive Electronics A type of control interface for a hard drive which is inside the hard drive unit Infrared Light just beyond the red portion of the visible light spectrum which is invisible to humans IR An abbreviation for infrared IrDA Infrared Data Associa
92. nnection Signal Shows Excellent Good Fair Poor or Not Connected depending on Strength the signal strength This is not shown for the AdHoc connection Table 6 Connectivity Condition The section describes how to set the network connection for a computer with Windows 2000 Q Network Settings In this section you set TCP IP Settings and complete 2 Double click the Network and Dial up Connections icon The Network and Dial up Connections window appears 3 Right click the Local Area Connection then click Properties from the menu that appears The Local Area Connection Properties window appears Critical Points More than one network adapter is installed in your system if more than one Local Area Connection entry is displayed In this case select the Local Area Connection entry with Intersil PRISM Wireless LAN PCI Card displayed under Device Name 4 Perform the following steps e Click Internet Protocol TCP IP e Click Properties The Internet Protocol TCP IP Properties window appears 59 N z Q F oO Lu 5 Set an IP address as indicated in Table 7 Ask your network administrator to check the setting Item Description For AdHoc Set the IP address and subnet mask Network Click Use the following IP address and enter a value for IP address and Subnet mask For Select Obtain an IP address automatically Infrastructure For the DNS
93. nt condition of connection The MAC address of the other computer that you are connected to is displayed when the connection is successfully made If you are connected to more than one computer the computer that has the best connectivity is displayed Current Shows the current channel used for the connection Channel Current Tx Shows the current transfer rate in Mbits sec Rate Radio Off Click Radio OFF to disconnect Radio On Click Radio On to connect to the network Rescan Click this button to search for others to connect to Throughput Shows the actual transfer rate of the transfer data for send Tx and receive Bytes sec Rx Link Quality Shows the link quality This is not shown for the AdHoc connection Signal Strength Shows the signal strength This is not shown for the AdHoc connection Table 15 Checking connectivity 69 N Z Q F oO Lu Troubleshooting This chapter contains troubleshooting information including causes and actions for problems you may find while using this device Q Troubleshooting Table Problem Possible Cause Possible Solution An exclamation mark or cross x is attached to Intersil PRISM Wireless LAN PCI Card A failure to recognize the device Restart the computer A failure in installing the driver Restart the computer Other computers are not displayed when the Network Computer icon is dou
94. nto the PC card slot when you install a PC card or you may be injured Critical Points It may be required to turn off the power to the computer or to install a device driver when you install a specific PC card Check with the manual supplied with each PC card Eject the dummy card from the PC card slot Raise and press the PC card eject lock button to eject the dummy card Dummy card Install a PC card Insert the PC card into the PC card slot as far as it will go with the labeled face facing upward 3 Lock the PC card Fully pull out the PC card eject lock button collapse it backward and lock the PC card with the fitting PC card eject lock button N Z Q F oO Lu 4 If the PC card is being installed for the first time install any necessary driver Some PC cards require the installation of a driver Check the manual supplied with each PC card and install a driver if required A floppy disk or a CD may be required to install a driver 5 Click the iz icon Safely Remove Hardware in the lower right corner of the screen notification area where a clock is displayed and make sure that the name of the PC card inserted is displayed correctly Ifthe name of the PC card is displayed click any vacant area on the desktop in the Ejecting a PC card section and insert the PC card again Critical Points When you use a PC card attached with a cable do not put anything heavy on or apply a shock to
95. o press the nsert key while holding the Fall key down To save only the active window as pictorial data press the nsert key while holding the 60 and Fal keys down Using painting software e g Paint you can edit save and print pictorial data To do so you need to import it to the painting software by selecting the Paste command from the Edit menu 15 O Delete key Used to delete the character on the right of the cursor With this key you can also delete the file or icon you selected By pressing the Delete key while holding the Ct1 and A1 keys down you can forcibly terminate the out of control application or computer QO Caps Lock key To fix to the English Capital mode press the C stesx key To deactivate the English Capital mode press these key again Shift key Used in combination with other keys By pressing a key while holding the Shift key down you can enter the character or symbol printed in the upper case of the key 8 Back Space key Used to delete the character on the left of the cursor O Enter key Used to confirm the string entered In text processing pressing this key inserts a hard return in the text That s why this key is also called the Return key D Pg Up Page Up key Cursor keys Used to return to the previous page To do so press the 0 key while holding the Fall key down Used to move the cursor upward downward to right and left 16 FUNC
96. om the menu that appears 2 Perform the following steps e Click Internet Protocol TCP IP e Click Properties Internet Protocol TCP IP Properties appears 3 Setan IP address Ask your network administrator and check the setting Item Description AdHoc Set the IP address and subnet mask Click Use the following IP address Network Enter a value for IP address and Subnet mask For Select Obtain an IP address automatically For the DNS server select Infrastructure Obtain DNS server address automatically For the IP address DNS server Network and default gateway follow the network administrator s instructions if any Table 13 Setting an IP address 5 Click OK Critical Points If you have changed the setting Close is shown Q Checking the Full Computer Name and Workgroup l Click Start Control Panel Make sure the Classic View is selected Double click the System icon System Properties appears Click the Computer Name tab Check Full computer name and Workgroup Ask your network administrator and check the setting 66 Item Description Computer A name to identify the computer on the network You can specify any name Name to each computer Use up to 15 single byte characters For easier identification use the model name or user name Workgroup A name of the network group Use up to 15 single byte characters AdHoc Network Specify the same n
97. omputer 1 Options You can expand the functions of this computer by connecting various options FDD unit Numerical keypad USB USB mouse z External Printer display DN US A PC card Combo drive unit DVD CD R RW CD R RW drive unit Battery Super disk drive unit Optional PC Card Slot unit Optional USB devices Supported by Windows XP Windows 2000 Windows 98 and Windows Me only 2nd Battery Optional Weight Saver unit Optional 22 Below explanation is necessary for your knowledge before connecting your peripherals Some setting up works are required for a certain peripherals You cannot use some PC peripherals just by connecting it to a PC Those peripherals require some setting up work after connection For example printers and PC cards require driver installation work after connecting them And memory and other peripherals do not require such setting up works Make sure to consult with this document for the peripheral connection to complete the work correctly See also the documents for the peripherals The peripheral installation methods shown in this document are only a few examples Make sure to consult with the documents for the peripherals as well as this document N Z Q F oO Lu n Use genuine products Use genuine optional device from our company We cannot guarantee proper function on this PC for the peripherals from other sources When it is necessa
98. ore pixels screen The more pixels per area the clearer your image will appear POST Power On Self Test A program which part of the BIOS which checks the configuration and operating condition of your hardware whenever power is applied to your notebook Status and error messages may be displayed before the operating system is loaded If the self test detects failures that are so serious that operation can not continue the operating system will not be loaded Disk A spinning platter of magnetic data storage media If the platter is very stiff it is a hard drive if it is highly flexible it is a floppy disk if it is a floppy disk in a hard housing with a shutter it is commonly called diskette Disk Drive The hardware which spins the disk and has the heads and control circuitry for reading and writing the data on the disk Diskette A floppy disk in a hard housing with a shutter DMA Direct Memory Access Special circuitry for memory to memory transfer of data which do not require CPU action DMI Desktop Management Interface A standard that provides PC management applications with a common method of locally or remotely querying and configuring PC computer systems hardware and software components and peripherals DOS Disk Operating System MS DOS is a Microsoft Disk Operating System Driver Acomputer program which converts application and operating system commands to external devices into the exact from required by a specific bra
99. ort This connector allows you to connect the computer to a telephone line and enables PC communications and Internet connection through the modular cable QO LAN port Used to connect the computer to a local area network LAN via an optional LAN cable so that you can use your computer on a network or connect to the Internet Q Main switch Used to turn on your computer PC card slot Used to install a PC card Critical Points Your computer came with a dummy card in the PC card slot PC card eject lock button Used to eject the PC card This button also prevents the PC card from accidentally coming out of the slot D IEEE 1394 DV port Used to connect a peripheral device e g a digital video camera DV to the computer via a DV cable D USB port You can connect separately available USB standard peripherals such as a FDD unit or printer to this port 1 Infrared Port The fast IrDA compatible port allows you to communicate with another IrDA compatible infrared device without a cable Air Vents Used to discharge heat out of the computer The cooling fan automatically starts rotating when the temperature in the computer rises to a specific level A FAILURE Do not block the air vent otherwise the temperature in the computer will rise and sometimes cause damage to the computer USB port You can connect separately available USB standard peripherals such as a FDD unit or printer to th
100. ot from it The size of the memory installed on your PC is displayed like this 64MB SDRAM If your PC does not start although memory is installed correctly the memory can be faulty or defective In that case contact Fujitsu Personal Echo Center or your local retailer To avoid damage to your PC do not touch any internal parts other than those you need to touch for the installation or removal of memory To avoid damage to your PC take care not to drop detached screws and so on into the PC To upgrade the memory on your PC for example to 1 GB you will need to remove the existing RAM module or modules Installing memory Turn off your PC and disconnect the AC adopter from it Close the LCD panel and place your computer upside down Remove two screws and detach the expanded RAM module slot cover Detach the expanded RAM module slot cover on the bottom of the PC Expanded RAM module slot cover k Install a new RAM module Align the notch in the RAM module with the protrusion in the slot and insert it diagonally into the slot until it clicks into place Your PC is provided with two expanded RAM module slots upper slot DIMM 2 and lower slot DIMM 1 Upper slot DIMM2 Lower slot DIMM1 5 Attach the expanded RAM module slot cover and secure it with screws Reattach the cover removed in Step 3 IMPORTANT e If memory is not installed properly the message Expanded Memory Error will be disp
101. ou really want to remove the driver 12 Click Yes When the driver is removed a window appears showing that the driver has been removed 13 Click OK 14 Close Add Remove Programs and Control Panel 15 Shut down Windows and turn off the computer 75 SECTION 2 If a Second LAN Device is Installed Q INSTRUCTIONS FOR DISABLING ANOTHER LAN DEVICE If you have another LAN card on your computer running Windows 98 perform the following steps to disable that LAN card before installing the driver OQ For Windows 98 1 Click Start Settings Control Panel 2 Double click System System Properties appears 3 Click beside Network adapters and double click the standard built in LAN device The following devices appear depending on your computer model Intel R 82559 Fast Ethernet LOM with Alert on LAN 2 e Intel R 8255x based PCI Ethernet Adapter 10 100 e Realtek RTL8139 A B C 8130 PCI Fast Ethernet NIC or others The LAN Card Properties window appears 4 Check Set disable with this hardware profile and click OK An x mark is added to the LAN card icon 5 Click OK 6 Restart the system 76 About IP Addresses Q SETTING IP ADDRESSES If you are not sure how to set the IP address refer to the following procedure If you have an access point DHCP server on the network set the IP address as follows Windows 98 Obtain an IP address automati
102. ound from two different sources Stroke keyboard The amount of travel of a key when it is pressed from resting to fully depressed Suspend To make inoperative for a period of time Your notebook uses various suspension states to reduce power consumption and prolong the charge of your battery SVGA Super VGA S Video Super Video A component video system for driving a TV or computer monitor System Clock An oscillator of fixed precise frequency which synchronizes the operation of the system and is counted to provide time of day and date TFT Thin Film Transistor A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually UL Underwriters Laboratories An independent organization that tests and certifies the electrical safety of devices VGA Video Graphics Array A video display standard originally introduced by IBM with the PS 2 series of personal computers 126 VRAM Video Random Access Memory A memory dedicated to video display data and control WFM Wired for Management is Intel s broad based initiative to reduce the total cost of ownership TCO of business computing without sacrificing power and flexibility Write Protect Prevent alteration of the binary state of all bits in a storage media Example all information on a device such as a floppy diskette a block of space in a storage media such as partition of a hard drive a file
103. out securing the sufficient safety required for the High Safety Required Use Data Storage Media and Customer Responsibilities The only effective protection for the data stored in a computer such as on a hard disk is for you Purchaser to regularly back up the data Fujitsu and its affiliates suppliers service providers and resellers shall not be responsible for any software programs data or other information stored or used on any media or part of any Product returned to Fujitsu or its service providers for Warranty Service or other repair including but not limited to the costs of recovering such programs data or other information It is solely your responsibility as the Purchaser to back up any software programs data or information stored on any storage media or any part of a Product returned for Warranty Service or repair to the designated service centers AUSTRALIAN WARNINGS WARNING FOR SAFETY REASONS ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIONS COMPLIANCE LABEL THIS INCLUDES CUSTOMER EQUIPMENT PREVIOUSLY LABELLED PERMITTED OR CERTIFIED Connection of Non Certified Approved peripherals may result in the equipment operating outside the Australian EMI Standards Modems connected to the Australian telecommunications network must be operated in accordance with the Labelling Notice This modem has been specifically configured to ensure compliance with the ACA Standards Do not adjust your modem or software outside the values indic
104. r management functions are set and no key is pressed for a certain period of time the CPU stops and the LCD panel backlight goes out In this state pressing any key lights up the backlight again If the computer stops too frequently change the BIOS setup settings Is it set to output to the CRT Switch over to the LCD display with the Fn F10 keys icp panel hard to read Checkpoint Cause and Solution Is the control adjusted Adjust the brightness with the brightness and contrast controls Battery is not charged Checkpoint Cause and Solution Is the AC adaptor con Check that the AC adaptor is correctly plugged into the power nected socket and into the computer Is the battery overheated The on the LCD display flashes If the ambient temperature is high and the battery temperature becomes too high during use the battery protection function may be triggered to stop the charging Is the computer too cold The on the LCD display flashes If the battery temperature falls too low the battery protection function may be triggered to stop the charging Was the charging stopped midway If you use the computer and disconnect the AC adaptor between the start of charging and the time the LCD turns off then the battery will not become fully charged Once you start charging do not remove the AC adaptor until the p LCD turns off 111 m z
105. r the printer may be damaged 1 Switch the PC power off and disconnect the AC adapter 2 Install the connector box 3 Connect the printer cable to the parallel connector on the connector box When viewed from the front the connectors are in a trapezium shape Study the shapes of the connectors and firmly insert the cable connector 1 then fix it tightening the left and right screws on it 2 Parallel connector Printer cable 105 4 Connect the printer cable and the power cable to the printer Refer to the printer manual for the details on connection Some printers may already have their power cables fixed on them 5 Insert the printer power cable plug to a receptacle and switch the printer power on 6 Connect the AC adapter to the PC and switch the PC power on 7 If the printer is connected for the first time install the driver Read the printer manual to install the driver Floppy disk s or CD s may be used for driver installation Critical Points Printer connection needs a printer cable Some printer packages may not include a printer cable In addition the printer cable that is attached to the printer may not be used due to a different connector shape If this is the case obtain a separately available cable that can be connected to the PC The printer connection procedures differ depending on your printer Refer to the printer manual for the details 106 15 Connecting an External Display Q Prepa
106. rag any object on the screen The left and right buttons correspond to the left and right buttons of a mouse and their functions vary from application to application Pressing the scroll button forward or backward enables you to easily scroll a window up or down Touch pad Left button Scroll button Right button Critical Points The Flat Point may malfunction if condensation occurs or if it is moistened In addition if you operate it with a moistened or sweaty finger or if the Flat Point surface is dirty the mouse pointer may not move correctly In such a case turn off your computer and wipe dirt off with a soft cloth slightly dampened with dilute detergent Some applications do not allow you to use the scroll button to scroll windows You can use an optionally available USB mouse instead of the Flat Point 12 Drag To return push this forward To advance push this backward Click means quickly pressing the left button once or tapping the touch pad once Pressing the right button once is called right click Double click means pressing the left button twice in a row or tapping the touch pad twice in a row Point to an item means moving the mouse pointer onto a menu item and so on to select it Pointing to an item highlights it and displays an explanation about it If the item to which you pointed has a submenu such items are marked with gt the submenu appears To dra
107. ransmission failure or a reduction in the transmission rate 4 Do not connect a modular cable to the LAN port otherwise your computer could break down Q Caution in using the internal modem Connecting to the Internet for a long time while still running some applications applies a considerable load on the CPU of the computer It may lead to interruption of communication via the internal modem In this case exit all applications you are running except your browser and e mail software before accessing the Internet again 82 10 Using Internal LAN Your computer has a built in LAN device so that it can be connected to a 10BASE T or 100BASE TX network Q Preparing necessary items LAN cable LAN cables are available in two types straight type and cross type You need to use a cable that meets the data transfer rate of the network So refer to the manual for the network device to which you intend to connect your computer and prepare an adequate cable Network device Prepare a device that meets the objective of network connection Here are some examples of network devices e Network Adapter e Network Cable Hub 83 SECTION 2 1 2 3 84 A ELECTRIC SHOCK Before connecting a LAN cable always turn off your computer and disconnect the AC adapter or you could get an electric shock ELECTRIC SHOCK e If it thunders immediately turn off the computer and disconnect the AC adapter and LAN cable from it
108. ring necessary items External display Prepare an external display that supports PC AT compatible or DOS V computers Display cable Cables for connection between a computer and an external display Generally an external display comes with a separate cable or a cable fixed to the back If no display cable is included with your external display or if the cable connector is not compatible with your computer prepare a display cable that is designed for PC AT compatible or DOS V computers and that has a connector compatible with the external display Manual for the external Ways of connection vary from display to display So be sure to read display used also the manual for the external display used This section explains how to connect a CRT display to the external display connector on the rear panel of your computer A ELECTRIC SHOCK Before connecting or disconnecting an external display to your computer always A turn off the computer and disconnect the AC adapter from it Failure to do so could lead to an electric shock A FAILURE Before connecting a cable read this manual carefully so that you can connect it Q correctly Connecting a cable incorrectly could cause your computer and external display to break down 107 N Z Q F oO Lu 1 Turn off the computer and disconnect the AC adapter from it 2 Connect the display cable to the external display connector on the rear panel of your computer A disp
109. roduct from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Do not use this product near water Do not place this product on an unstable cart stand or table The product may fall causing serious damage to the product Slots and openings in the cabinet and the back or bottom are provided for ventilation to ensure reliable operation of the product and to protect it from overheating these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should never be placed near or over a radiator or heat register or ina built in installation unless proper ventilation is provided This product should be operated from the type of power indicated on the marking label If you are not sure of the type of power available consult your dealer or local power company This product is equipped with a 3 wire grounding type plug a plug having a third grounding pin This will only plug into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the purpose of the grounding type plug Do not allow anything to rest on the power cord Do not locate this product where persons will walk on the cord If an extension cord is used with this product make sure that the tota
110. ry to use the peripheral from the other source consult with the manufacturer of the product Use the peripherals that conform to ACPI standard This PC is set to ACPI mode for Windows XP Windows 2000 and Windows 98 Power save and other functions may not work correctly if a peripheral does not conform to ACPI mode Notes on installation removal The installation of the peripheral must be done after the setting up of an operating system except for a PS 2 mouse The set up function might not complete correctly if such a peripheral is attached before the operating system set up Critical Points When you connect a peripheral to a connector make sure that the direction of the connection is correct and connect straight When you connect more than one peripherals complete setting for each peripherals before installing others 23 2 Using a PC Card Observe the following points when using PC cards to prevent breakdown i Do not place PC cards in high Do not subject PC cards to Avoid rubbing PC cards and temperature locations and strong shocks building up static electricity locations subject to direct sunlight Do not place heavy objects on Be careful to avoid spilling coffee When storing a PC card always top of PC cards and other liquids on PC cards place it in its special case 24 Q Caution in using PC cards A FAILURE APC card
111. s No indicator is displayed on the status indicator LCD when the main switch is turned off except when the computer is being recharged SUS RES Indicator This indicator comes on when the computer is running and blinks in standby status ac Adapter Indicator This indicator comes on when the power is supplied from the AC adapter Battery installation indicator 1 2 This indicator appears when the battery is installed The numbers 1 and 2 indicate the internal battery and an optional add on battery installed in the mobile multi bay respectively Battery Charge Indicator gt This indicator appears when the battery is charged Remaining Battery Power Indicator 777 This indicator indicates the remaining battery power CD Access Indicator S This indicator appears when a CD or DVD is accessed O Hard Disk Access Indicator 9 This indicator appears when the internal hard disk is accessed 10 Critical Points If you turn off the main switch or operate the SUS RES switch while the hard disk access indicator is showing the data on the hard disk may be corrupted Q Floppy Access Indicator The Floppy Drive Access indicator states whether the floppy disk drive is being accessed This indicator will flash if your software tries to access a disk PC Card Access Indicator E This indicator appears when a PC card is accessed 8 Num Lock Numerical Lock Indicator
112. s designed 56 KBPS connections are likely to be restricted to lower bit rates when connected to some PSTN implementations Telecom will accept no responsibility should difficulties arise in such circumstances Immediately disconnect this equipment should it become physically damaged and arrange for its disposal or repair This equipment shall not be used in any manner which could constitute a nuisance to other Telecom customers This equipment shall not be set to make automatic calls to the Telecom 111 Emergency Service This device is equipped with pulse dialling while the New Zealand standard is DTMF tone dialling There is no guarantee that Telecom lines will always continue to support pulse dialling It is strongly recommended that pulse dialling is not used Some parameters required for compliance with Telecom s Telepermit requirements are dependent on the equipment PC associated with this device The associated equipment shall be set to operate within the following limits for compliance with Telecom s Specifications For repeat calls to the same number There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation and The equipment shall go on hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt For Automatic calls to different numbers The equipment shall go on hook for a period of not less th
113. s play I Disable Stop Eject Button for CD removal Cancel ppl Circle High Color Stop CD Player Options TRACK CD Player is a little tool to play music CDs 01719 Select the appearance of your CD player controls from the options below Change design Basic 16 Colors x T Always on top T Continuous play Disable Stop Eject Button for CD removal Basic 16 colors You can move the CD Player to anywhere on your desktop Drag it by clicking on the track number display holding it down and dragging the control panel When you have placed it where you would like release the mouse button Critical Points If you have your display set to 256K colors the basic display will appear no matter which one you select You will need to set your display colors to more than 256K in order to select other display appearances When you close the Disc Player s desktop control panel it will stop the audio Disc Player Precautions e LifeBook Application Panel uses the date and time settings of your LifeBook notebook If the date and time are off you can adjust this setting in the Windows Control Panel e If you insert an audio CD which has both audio and data tracks into the Disc Player the Disc Player may fail to play the first audio track The Volume Up Volume Down and Mute controls for the Disc Player desktop control panel ad justs the volume of the CD audio line only It does not adjust your notebook s
114. sats 34 4A About MOMOSY seistsiccctssicsstcsseccssecticsseaccrsscneusasacecseansrssandeces 37 5 Expanding Memory cccssseeesseeeeessneeeseeeeenseeeessseeeneeeenes 42 6 Using a Mobile Multi bay Unit 0 00 0 ceceeseeeseneeenseeeens 46 7 Port Replicator 0 0 0 ccsesessseeeesseeeesseeeesseeeeenseeeenseeeeneeeeees 49 Installing the Port R plCAtOr viii ccssevsessecscedcvascecvisevcendsascascsevnerseess 49 Removing the Port Replicator cece ceeeeeeeeeeeeeseneeeneeeeaes 50 8 About the Integrated Wireless Lan For selected model Before Using This Device Wireless Lan Modes cceeseceeeeeeeeeeeteeeteeeeeess Connecting Windows 98 2000 Systems cssseeeee WOK OW sseccvserscesecsccaicdssvecrsarsccacssvereceaaisarseeseeascaivess Setting Parameters Network Connection Windows 98 scccsssseeeeeeeee 55 Network Settings ccceseseeseeteeeeeneeee Network Connection Windows 2000 xii SHAMO eidiau niea aE 61 Ghecking the Connection sess tiscdsscsectazvssescesteed castseineaeeseescezartseesen 63 Connecting Windows XP Systems ceseseeneseeeeeeee 64 WorkHlOW ister ctres Atanas Abe te e eave Setting Parameter isesi veka seest Meessevsatery Network Connection SHAPING eraai Checking the Connection Troubleshooting ssssssssssnnssnnunnnunnnnnnnnnnnnnunnnnnnnnnnnnennnnnnnn 70 If a Second LAN Device is Installed ceseeeeeees 76 About IP Addresses
115. security personnel Security officials may require you to turn your notebook On Make sure you have a charged battery on hand Outlet type Location 11 United States Canada parts of Latin America Japan Korea 1 the Philippines Taiwan lI Noo oo Russia and the Commonwealth of Independent States CIS X most of Europe parts of Latin America the Middle East parts vo of Africa Hong Kong India most of South Asia Mexico United Kingdom Ireland Malaysia Singapore parts of e Africa China Australia New Zealand 116 e When travelling with the hard drive removed wrap the drive in a non conducting materials cloth or paper If you have the drive checked by hand be ready to install the drive if needed Never put your hard drive through a metal detector Have your hard drive hand inspected by security personnel You can however put your hard drive through a properly tuned X ray machine Take the necessary plug adapters if you re travelling overseas Check the following diagram to determine which plug adapter you ll need or ask your travel agent BATTERIES Caring for your Batteries Always handle batteries carefully Do not short circuit the battery terminals that is do not touch both terminals with a metal object Do not carry lose batteries in a pocket or purse where they may mix with coins keys or other metal objects Doing so may cause an explosion or fire Do
116. seeseeeeeeees 107 Connecting an external display asiria aaan 107 1 When This Happens ss ssssnnsssnnnnnnnnnnnnnonnnnnnnnnnnnnnnnnnnnnna 110 2 Care and Maintenance csecsscsseesseeeseeseseeseeeenees 115 3 Glossary ais seczsctcccenscactecncsececstacencee caceconecaseectanesteetacecencesece 120 SECTION This section explains basic operations and basic items for using this computer including the names of the parts and their functions Flat point operation methods floppy disk unit handing and battery operation r z F oO Lu 1 Names of the Parts and their Functions 1 LCD display The monitor of your computer Critical Points About the characteristics of LCD displays For reasons of characteristics specific to LCD displays the following phenomena may occur but they are not defects in your LCD display e The TFT color liquid crystal display LCD of you computer consists of more than 2 350 000 pixels dots if the resolution is 1024x768 which are arranged in rows and columns through the utilization of high level technology For technical reasons however some dots on your LCD display may not light up or be always lit but this does not mean that the display is defective There may be a slight difference in color between your LCD display and another LCD display because of differences in manufacturing condition Moreover your LCD display may produce colors somewhat unevenly because o
117. selected 128 bit for the encryption You can use the following characters 0 9 A Z a z _ underscore For example to set ABC12 for the encryption key enter ABC 12 Default Key Click the down arrow and select a key from Keys 1 4 Table 2 Encryption Key Setup 53 N Z Q F oO Lu 7 8 54 When you finish your entry click Apply Click OK PRISM Wireless Settings closes You have completed the parameter settings Critical Points When you are using ADSL PPPoE with the infrastructure network to connect to the Internet you need to change the MTU size set for the computer To change the MTU size refer to the manual that comes with the access point Network Connection Windows 98 The section describes how to set the network connection if your computer running Windows 98 In this section you set TCP IP Settings and complete Checking Computer Name and Workgroup required for the network connection Q TCP IP Settings 1 2 Click Start Settings Control Panel N Z Q F oO Lu Double click the Network icon Network appears Perform the following steps e Click TCP IP Click Properties Critical Points If you have more than one TCP IP entry select TCP IP Intersil PRISM Wireless LAN PCI Card TCP IP Properties appears Set an IP address When you are done ask your network admin
118. sity arises xi SECTION 1 N z W 22 SECTION 3 CONTENTS 1 Names of the Parts and their Functions 00 0200 2 Front features of the COMPUTED cc eesecesesessseeseecseeeeeeeeeaeeeseeees Left right features of the computer Rear features of the computer Bottom features of the computer wits Statusindicatot LCD oc cesccvesscsseccestssesetenscesescarneaseccesnedaateeasecesceesnees 2 Pointing Device cccscscescseessseeeesenersseceesneneeenscnereseeees 12 About the Flat Point i sccscsseucescecnessssvasescvcavsvesecasctacasavseesccatanecsceenavearss 12 How to use the Flat POint c ccccccessseeeeeeeessesseeeeeeeessestaeeeeeeees 13 3 KO YDOalG scsi secs sctcsssssetscasesteseanesnscacaceesanstsnascenessacsdantaresneanae 15 KV DO AIG AE ATT T vaerseesreestaad 15 4 Replacing the Internal Battery Pack cccceseesee 19 T OPNS waisc cies ccceecedcc cee cccdexscenceectnntsesccesenedacesanecesniesanteencecten Options Peripherals 2 Using a PC Card escsseteeeesens Precautions for PC Cards Installing a PC card Ejecting a PC card pel ceca tee donee cae 3 Using a CD DVD ices iccecs cocccccssccccesessstecnceesiecessceceaessecrecensttixs 30 Loading a CISC xs tssccivagies decedent Goaies us decree ENEA 32 Ejecting the diS sicccsecesis ccvscesssenvedcasceneud cast cesseetscerseaceiecisesenvsteanect
119. sktop controls will always be seen on your screen no matter what other application you are running If you click on Continuous Play your Disc Player will automatically start over at the beginning as soon as it finishes the last track By default the Eject Button is disable from the CD Player Options Once you click the Eject button from the CD Player the drive will not eject If you want the Eject Button to be function uncheck this options 101 You can change the CD Player design by selecting the setting from the pull down menu from the CD Player options TO PLAYER Timon OMorge CD Player Options CD Player is a ite tool to play music CDs Select the appearance of your CD player controls from the options below Change design Gray High Co x I Always on top IT Continuous play M Disable Stop Eject Button for CD removal IR Grey High Color fivis OMos S Eo N 5 00 00 Q CD Player Options i CD Player is a little tool to play music CDs Select the appearance of your CD player controls from the options below Change design Stick High Color v T Always on top T Continuous play IV Disable Stop Eject Button for CD removal Stick High Color CD Player Options CD Player is a little tool to play music CDs Select the appearance of your CD player controls from the options below Change design Circle High Colo v I Always on top I Continuou
120. the PC card eject lock button to eject the PC card SECTION 2 PC card 5 Install the dummy card Insert the dummy card into the PC card slot as far as it will go fully pull out the PC card eject lock button and collapse it backward to lock the dummy card Dummy card 29 3 Using a CD DVD In this manual CD ROMs music CDs and CD R RW discs are collectively referred to as CDs and DVD ROMs and DVD VIDEOs are referred to as DVDs A INJURY e When inserting or ejecting a CD or DVD don t put any fingers on the disc tray to prevent possible injury to them QO Caution in handling a CD DVD Keep the following in mind when using a CD DVD When you unscrew the screws on your PC use the cross point screwdriver with the appropriate size for the screws Using screwdrivers other than that may damage the head of screws When taking out a disc from the case or loading it in your computer don t touch any surface of it e Handle a disc with care so as not to put fingerprints on it to make it dirty or dusty or to scratch it otherwise no data could be read from it written or rewritten on it Soiled audio CDs or DVD VIDEOs may not be played back normally Don t stick any label on any surface of a disc or write anything to it with a ball point pen or pencil Be careful not to spill coffee or any other liquid over a disc When a disc is dirty or condensation occurs on it wipe the disc radially from the c
121. the beam Data The information a system stores and processes se z F oO Lu DC Direct current A voltage or current that does not fluctuate periodically with time Default Value A pre programmed value to be used if you fail to set your own DIMM Dual in line memory module LAN Local Area Network An interconnection of computers and peripherals within a single limited geographic location which can pass programs and data amongst themselves LCD Liquid Crystal Display A type of display which makes images by controlling the orientation of crystals in a crystalline liquid Lithium ion Battery A type of rechargeable battery which has a high power time life for its size and is not subject to the memory effect as Nickel Cadmium batteries LPT Port Line Printer Port A way of referring to parallel interface ports because historically line printers were the first and latter the most common device connected to parallel ports MB Megabyte 121 Megahertz 1 000 000 cycles per second Memory A repository for data and applications which is readily accessible to your notebook CPU MHz Megahertz MIDI Musical Instrument Digital Interface A standard communication protocol for exchange of information between computers and sound producers such as synthesizers Modem A contraction for MOdulator DEModulator The equipment which connects a computer or other data terminal to a communication line Monaural A s
122. tion An organization which produces standards for communication using infrared as the carrier IRQ Interrupt Request An acronym for the hardware signal to the CPU that an external event has occurred which needs to be processed KB Kilobyte 124 Program An integrated set of coded commands to your computers telling your hardware what to do and how and when to do it PS 2 An IBM series of personal computers which established a number of standards for connecting external devices such as keyboards and monitors RAM Random Access Memory A hardware component of your notebook that holds binary information both program and data as long as it has the proper power applied to it RAM Module A printed circuit card with memory and associated circuitry which allows the user to add additional memory to the computer without special tools Reset The act of reloading the operating system A reset erases all information stored in RAM Restart See Reset Resume To proceed after interruption In your notebook this refers to returning to active operation after having been in one of the suspension states ROM Read Only Memory A form of memory in which information is stored by physically altering the material Data stored in this way can not be changed by your notebook and does not require power to maintain it SDRAM Synchronous Dynamic Random Access Memory Serial Port A connection to another device through which data is transferr
123. ts terminals or ICs but hold its edges Also be careful not to touch any components or terminals inside the computer Touching a terminal with oily fingers could cause poor contact FAILURE Memory is composed of parts very sensitive to static electricity and it may be S damaged even by static built up in a human body Before handling memory always touch a metal object with your hand to discharge static FAILURE Q e Before replacing memory be sure to turn off the computer Replacing while the N Z Q F oO Lu 2 computer is in standby or hibernation mode could cause damage to the computer or memory Critical Points Be sure to install memory on your computer before turning on the computer To avoid damage be careful not to drop a screw removed etc in the computer Turn off the computer and disconnect the AC adapter Close the LCD display and turn and place the computer upside down Remove the two screws shown in the following figure and detach the expansion RAM module slot cover Detach the expansion RAM module slot cover at the bottom of the computer 43 4 Remove the memory Disengage the two tabs securing the memory on both sides and pull the memory out of the slot 5 Install a new RAM module Align the notch in the RAM module with the protrusion on the connector diagonally insert the RAM module into the slot and push it down until it clicks into place Notch in the RAM module Notch in the
124. ture mode is most suitable when you are configuring multiple wireless LAN networks on the same floor To connect a wireless LAN network to a wired LAN you need an access point Q How to Handle This Device The Integrated Wireless LAN device is already installed in your LifeBook computer Under normal circumstances it should not be necessary for you to remove or re install it The LAN has been configured to support the operating system with which your system shipped 51 N z Q F oO Lu n Connecting Windows 98 2000 Systems This chapter describes how to set the wireless LAN connection for computers running Windows 98 or Windows 2000 Critical Points When you receive your LifeBook the integrated wireless LAN device and drivers have already been installed This procedure outlines the steps for setting the device parameters The proper setup of the wireless LAN requires several steps which must be performed in the proper order Following is a general outline of the steps that must be performed Each step is detailed later in this procedure 1 Setting parameters e Setting the profile Setting the encryption 2 Network settings e Setting the protocol and checking the network Setting file and printer sharing e Checking the connection 1 Click Start Settings Control Panel 2 Double click the PRISM Settings icon The PRISM Wireless Settings appears 3 Set the profile as specified in Table
125. u Choose th Timed 5 How 0 Minute Time2 18 How PO Minute 7 time Procedure when you received mails Start a mail program OK Cancel Apply To configure Mail Check Interval This function allow you to specify an interval minutes for checking for a new mail during you use the computer Recommendation of this function use with LAN connection Fa E Mail Account Settings x DA Connection After checking mail w Special recipient tH Important Mal Sound E Mail Notification LED Auto Mail Check GA Mail Check Interval Specify an interval minute for checking for a new mail during you use the computer Recommendation of this function use with LAN connection Specify how oft mu Y JS Number of the Minutes heck for a new mail Cancel Apply 98 To configure Special recipient This function allow you to add a special recipient on the Address List You have to specify from the Mail Check Interval to check the check box of Periodically check for New Mail from the menu Mail Check Interval Fa E Mail Account Settings x th Important Mail Sound SA E MailNotificationLED TA Auto Mail Check EA Mail Check Interval EA Connection After checking mail Special recipient Each time you receive a mail from a recipient added to Address List Application Panel will so notify by changing the CoolView s backlight color Address List ls Backlight Color Special Recipient Mai
126. ur computer Manual for USB device Ways of connection vary from USB device to USB device So be sure to read also the manual for the USB device used Critical Points Each USB port is capable of supplying up to 500mA to the USB device connected if the device requires no power supply from any other source For more information refer to the instruction manual for your USB device 86 1 Connect a cable to the USB device you want to use 2 Plug the other end of the cable in the USB port of your computer Insert the cable with the USB connector s 4 marked surface facing upward USB port N Z Q F oO Lu 3 Install the device driver Some USB devices get ready for use only if being connected and they don t require the installation of a driver For more information refer to the manual for the USB device used Critical Points Ifthe Install Hardware dialog box appears when you connect a USB cable click Continue to install the device driver 87 12 LifeBook Security Application Panel 1 Application A Button 2 Application B Button 3 Internet Button 4 E mail Button Enter Button Sus Res Button A unique feature of your LifeBook is the Security Application Panel that allows you to secure your LifeBook from unauthorized use The Security Application Panel also allows you to launch applications with a touch of a button when your system is on If the security system is activated
127. uter for the first time after purchase the battery is not yet charged so you must connect the AC adaptor and turn on the main switch Is the main switch turned on If the main switch is not turned on the power will not come on even if the SUS RES button is pressed Is the battery charged If a beep is heard when the main switch is turned on then the battery is running low LOW BATTERY Connect the AC adaptor Has the computer been left unused for a long time When using the computer for the first time after leaving it unused for a long time connect the AC adaptor and switch on the main switch to switch on the power Nothing displayed on the LCD panel Checkpoint Cause and Solution Is D displayed on the LCD panel AC 100 240Y Displayed Adjust the brightness and darkness with the brightness and contrast controls Flashing or not displayed Press the SUS RES button to put the computer into operating mode Check if the battery is charged If it is not charged connect the AC adaptor and charge it If you are already using this computer with the AC adaptor connected check that it is correctly plugged into the power socket and into the computer Is anything displayed on the status indicator LCD Connect the AC adaptor and switch on the main switch 110 Checkpoint Cause and Solution Have you been pressing any of the keys On this computer if the powe
128. uter that you want to access The drive that you set with Sharing is displayed The drive is not displayed unless it is set for sharing even if it exists Double click the drive that you want to access The drive is displayed showing its contents and made available to you If you have a question or problem refer to Troubleshooting a Checking the Connectivity _ 58 Click Start Settings Control Panel Double click the PRISM Settings icon PRISM Wireless Settings appears Check the connectivity on the Link tab The current condition of connection is displayed Item Description State Shows the current condition of connection The MAC address of the other computer that you are connected to is displayed when the connection is successfully made If you are connected to more than one computer the computer that has the best connectivity is displayed Current Shows the current channel used for the connection Channel Current Tx Shows the current transfer rate in Mbits sec Rate Radio Off Click Radio Off to disconnect Click Radio On to connect to network Radio On Rescan Click to search for others to connect to Throughput Shows the actual transfer rate of the transfer data for send Tx and receive Bytes sec Rx Link Quality Shows Excellent Good Fair Poor or Not Connected depending on the link quality This is not shown for the AdHoc co
129. warning The example on the left is a caution for electric shock Q The circle and slash indicates prohibited behavior The symbol inside BEC the circle indicates the concrete nature of the prohibition The example on the left indicates that disassembly is prohibited The indicates instructions that must be followed The symbol inside indicates the concrete nature of those instructions The example on the left tells you to unplug the power plug from the socket Key notation and operation methods Explanations of key operations do not show all the characters on the keyboard Instead they indicate just the keys necessary to the explanation as follows Examples Ctrl key Enter key gt key When multiple keys are to be pressed at the same time this is indicated by connecting them with Examples Ctrl F3 keys Shift 7 key Screen examples The screens shown in this manual are examples Please understand that the file names and screens you use may be different Notation in text Here is what symbols in text mean Symbol Meaning Critical Point Indicates a point necessary for correctly operating the hardware or software Column Gives the meaning and brief explanation of a term Kom Column Indicates the page to see elsewhere in this manual Critical Points Command input key input Within the text of this manual command input giving commands to the co
130. y pushing the suspend resume button only turns on the Security Indicator Your LifeBook does not unlock the Security Indicator turns off after one minute To resume normal operation first attach a power supply to the LifeBook Then you may unlock the LifeBook You have two options when uninstalling the security panel application e Uninstall the security panel application software This will disable all security feature e Uninstall the security panel application with password still active This will not allow any changes to the password Uninstalling the Security Panel Application Software Remove passwords when User wants no password protection whatsoever and doesn t want to give anybody the utility to set a password on their computer In this case if passwords Supervisor user or both are set the passwords must first be cleared BEFORE removing the application To clear passwords follow same procedure in SETTING PASSWORD CODES except this time select REMOVE enter current password then click Next When asked to confirm select Yes Removing Security Panel Application With Password still Active Using this feature will not allow any changes to the password Critical Points Removing the applications does not remove the password It simply removes the utility to change add remove passwords To change your password you must reinstall the application 91 User 1 Go to Start Menu Click on Control Panel 2 Open Add
131. ystem using one channel to process sound form all sources MPU 401 A standard for MIDI interfaces and connectors NTSC National TV Standards Commission The standard for TV broadcast and reception for the USA Operating System A group of control programs that convert application commands including driver programs into the exact form required by a specific brand and model of microprocessor in order to produce the desired results from that particular equipment Parallel Port A connection to another device through which data is transferred as a block of bits simultaneously with a wire for each bit in the block and with other wires only for control of the device not for transfer of data Partition A block of space on a hard drive which is set aside and made to appear to the operating system as if it were a separate disk and addressed by the operating system accordingly PCMCIA PCMCIA is trademark of the Personal Computer Memory Card International Association The Personal Computer Memory Card International Association is an organization that sets standards for add in cards for personal computers Peripheral Device A piece or equipment which performs a specific function associated with but not integral to a computer Examples a printer a mode a CD ROM 122 Pitch keyboard The distance between the centers of the letter keys of a keyboard Pixel The smallest element of a display a dot of color on your display screen The m

Download Pdf Manuals

Related Search

Related Contents

  SeaLand TankWatch Level Monitor System User's Manual  Outlaw Audio 1070 Stereo Receiver User Manual  Harbor Freight Tools (420cc) Quick Start Guide  Samsung SE-S204N User's Manual  Slendertone Gymbody Plus    Mode d`emploi du site d`entrainement scolaire  

Copyright © All rights reserved. Failed to retrieve file