Home

Operating Instructions

1. An image was gt You cannot recover an image once it is deleted deleted accidentally a O C 2 D n F O O a 5 Vo The Memory e Is the write protect switch Slide the write protect switch to the Stick cannot be of the memory card is in write enable position page 73 formatted the LOCK position e Is ita Memory Stick gt You cannot delete an image from or ROM format a Memory Stick ROM The Memory gt Once the Memory Stick is Stick was formatted all the data is deleted and formatted cannot be recovered To prevent accidentally accidental format set the write protect switch to the LOCK position page 73 Continued 59 GB Others symptom Cause Solutions You cannot insert the ink ribbon smoothly The ink ribbon cannot be removed The print paper jams Printing stops midway 60 GB e Is an error message displayed e The access indicator flashes in orange e Is an error message displayed e Any indicators light or flash gt If the ink ribbon does not click into place remove it and then re insert it Only when the ink ribbon is too slack to be loaded wind the ink ribbon in the direction of the arrow to remove the slack Read This First gt Turn off the on standby switch and then turn it on After the motor sound stops try to remove the ink ribbon If this does not solve the problem contact Sony se
2. mm O C 2 D NN 7 O O a 5 Vo symptom che Causersolutions Print quantity specified in the Pages Per Sheet in the Layout tab of the Sony DPP FP70 FP90 Properties dialog box does not match the actual print quantity and printed results Colors of the printed image from a PC are different from those printed from a memory card 64 68 gt Depending on the application you use the print quantity setting of the application you use may have priority over the setting specified in the printer driver dialog box gt Since the process in printing an image from a memory card differs that in printing from a PC the colors may not be exactly identical If an error message appears If an error occurs the following error messages may be displayed on the LCD screen Follow the solution described here to solve the problem Printer Error messages Meaning Solutions Error occurred with printer Turn it gt An error has occurred with the printer Unplug off and on then retry the AC power cord of the printer connect it again and then try operating again If this occurs again consult with your Sony dealer or Sony service facilities Memory cards and external device Meaning Solutions No Memory Stick No gt A memory card or an external device is not inserted CompactFlash card No SD Card into their slot Or the external device is not No External Device connected
3. Date Display Order LCD Backlight Demonstration Mode Unit Printer Information Display Language 34 68 Ascending In the image list window the images are displayed in the order of their image numbers starting from the smallest number Descending In the image list window the images are displayed in the order of their image numbers starting from the largest number On In the image list window the images without thumbnail miniature image used as index data will be displayed as an icon Off In the image list window the images without thumbnail miniature image used as index data will be displayed as its original image Set the displayed order of the date Year Month and Day from the following Y M D e M D Y eD M Y Set the brightness level of the LCD backlight from the following Bright Dark On A flash file demonstration to explain the functions of the printer starts automatically after the printer has been left unused for about 5 seconds without any memory card or external device connected To stop the demonstration press any button Off No demonstration flash file will be started In the Creative Print ID photo menu you can select the unit you use in specifying the sizes of a photo as follows cm e inch Version of the firmware and total print number will be displayed You can select the language to display menu or messages Japanese English French Spanish German Italian Russian Korean
4. 8 GB D Date Display Order 34 Date print 32 DCF Design rule for Camera File system 32 Deleting an image 28 Demonstration mode 34 Detailed image data display 8 Display Printer setup 33 DPOF 8 11 E Easy printing 11 Edit menu 12 Enlarging and reducing an image size 9 13 Error messages 65 External device 38 F File menu 27 Filter 15 Fish eye effect 15 Format 29 Front panel 6 H Handle 7 I Icon 34 ID photo 21 Image data display 8 Image list 9 Image preview 8 Index printing 11 Ink ribbon Notes on use 71 Input indications 8 Installing Picture Motion Browser 42 Printer driver 40 L Language 34 Layout print 19 LCD backlight 34 LCD screen 8 Listing Order 34 M Mass storage device 38 Memory Stick Format 29 Notes on use 73 Types 72 Monochrome 15 Moving an image 13 O On standby indicator 35 38 41 On standby switch 35 38 41 Orientation 46 P Paper jams 68 Partial Color 15 Parts and controls 6 PictBridge camera 35 PictBridge EXT INTERFACE connector 35 38 Picture Motion Browser 44 Precautions 70 Preview 8 Print paper Notes on use 71 Print quantity 8 17 Print setup 30 Printing Edited image 17 From a Bluetooth device 36 From aPC 39 From a PictBridge camera 35 From an external device 38 Using the Picture Motion Browser 44 Printing range 77 Protect indication 8 R Rear panel 7 Red eye reduction 16 Rotating animage 14 S Saving an image 17 Screen
5. Insert the memory card or an external device Read This First An incompatible Memory Stick gt A memory card or an external device that the CompactFlash card SD Card printer does not support is inserted Use a External Device is inserted compatible memory card or device pages 72 to 75 No image file gt There are no image files in the memory card or an external device that the printer can handle Connect a memory card or device that contains images that can be displayed with the printer No DPOF file gt There are no DPOF preset image files in the memory card or an external device Specify the print DPOF mark with your camera Cannot delete a protected image gt To delete a protected image cancel protection on your camera You cannot delete a DPOF image gt To delete a DPOF preset image cancel the print DPOF mark on your camera Continued 65 GB Bulzooyusayjqnos Meaning Solutions Protected Cancel protect then try gt The Memory Stick is write protected Release again the write protection page 73 The Memory Stick CompactFlash gt There is no free memory space in the selected card SD Card External Device is memory card or external device Delete full unnecessary images or replace with a one having sufficient memory space The Memory Stick CompactFlash_ gt An error may have occurred If these messages card SD Card External Device has appear frequently che
6. gt Read This First Press on standby switch to turn on the printer The on standby indicator of the printer lights in yellow green 4 Connect a camera or an external device to the PictBridge EXT INTERFACE connector of the printer 38 GB Use the USB cable supplied with the digital camera or other external device if necessary Printing in the direct mode is possible To PictBridge EXT INTERFACE connector PictBridge EXT INTERFACE connector Mass storage compliant USB memory digital camera photo storage device or other external device e Ifyouuseacommercially available USB cable pleaseusetheoneshorterthan3min length While theaccessindicator of theexternal deviceis flashing never turnoffthepowerof the printer oranexternal devicenorremove the USBcable The data inside theexternal devicemay be damaged Wecannot guaranteeany damages thatmay becaused by data lossor damage Youcannotuse a USBhub ora USB device equipped witha USB hub Encoded orcompressed date by fingerprint authentication orpassword cannotbeused The following Sony USB devices cannotbe used since they contain fingerprint authenticationsystem ora USB hub USM16A S USM32A S USM64A S USM128A S USM256A S USM128B BMS USM64C USM128C USM128F Printing from a PC You can print the images from a PC by installing the supplied software on your PC and connecting it to the printer This section explains how to insta
7. images 1 2 Display the Creative Print menu page 18 Press lt D gt A V to select Calendar then press ENTER The window used for selecting the calendar template is displayed sz Calendar LEETE ELEELE T of EE Select form with LF nad Press lt gt A V to select the desired template and then press ENTER The preview of the selected template is displayed 20 GB Calendar area x 12345 687 Image area xx Calentiar 123465 20 21 22 23 24 25 26 27 28 29 3031 ah a iiaa to select item Tip You can select and set an image area or calendar area in any order Select an image When you select a template with multiple images repeat the procedures below to select an image for each area Press lt 1 gt A V to select an image area then press ENTER The image list is displayed Press D gt A V to select the desired image then press ENTER The window used for adjusting the image angle and position is displayed For information on adjustment see step 6 on page 19 3 Press lt P to select 0K and then press ENTER The image is selected and displayed in the relevant area Set the calendar Press lt gt A V to select the calendar area and press ENTER to display the calendar setting window Calendar Ok Calender setting 2007 04 sunday Sunday in m i Start Da Color of Day Th ae hadai ENTER
8. Are you sure that you have followed the installation procedures correctly e Is another application program running e Did you specify the CD ROM as the installation CD ROM correctly e Can you read the CD ROM with Explorer gt The printer does not provide the function for viewing the memory card or an external device images from the printer gt Please download the printer driver from the Customer support home page page 77 Or contact your Sony dealer gt Follow the procedures in the operating instructions to install the driver page 40 If an error occurs restart your computer and do the installation procedures again gt Exit all applications and then install the driver again gt Double click My Computer and then the CD ROM icon in the open window Follow the procedures in the operating instructions to install the driver gt The USB driver may not be installed properly Follow the operating instructions to install the USB driver again gt If there is an error with the CD ROM you may not be able to read it If an error message is displayed on your PC check the contents and remove the source of the problem Then install the printer driver again For details on the error contents see the operating instructions of your PC Symptom Cause Solutions e Is there an anti virus program or other program running on the system The printer driver cannot be installed e Did you lo
9. Bdo eee Press A V to select the following items and then press lt P to select an option Item Procedures Start Y M Set the first month and the year starting the calendar Press lt gt to select the month or year and press A V to set the number Press ENTER Start Day Set the day of the week placed furthest left in the calendar Press A V to select Sunday or Monday Then press ENTER Color of Day Set the color of Sunday and Saturday to be displayed in the calendar Press gt and then A V to select the desired color for Sunday and Saturday Then press ENTER Press 4 gt A V to select 0K and then press ENTER The calendar is displayed in the calendar area To save or print the calendar previewed see page 17 Making an ID photo You can specify the desired vertical and horizontal sizes for an image to be printed as an photo for an identification card such as a passport or a small photo stand 1 2 Display the Creative Print menu page 18 Press lt gt A V to select ID Photo then press ENTER The window used for setting the height and width of an ID photo is displayed 4 to select item Tip You can set both height and width a value between 2 0 to 6 0 cm Press A V to select height or width that you want to adjust and press ENTER The cursor moves to the number input area Press A V to set the size and then press ENTER The ID photo
10. Chinese Simplified Chinese Traditional Netherlands Portuguese Arabian Persian Factory settings Printing from a PictBridge camera or external device Printing from the PictBridge digital camera You can connect a PictBridge compliant digital camera and print an image directly from your digital camera When printing from a PictBridge EXT INTERFACE connector make sure to remove memory card s from the printer in advance 1 Set your digital camera ready for printing with a PictBridge compliant printer The settings and operations that are necessary before connection differ depending on the digital camera For details see the operating instructions of the digital camera you use In case of Sony Cyber shot digital camera for example select PictBridge mode for the USB Connect 2 Connect the printer to the AC power source Read This First 3 Press on standby switch to turn on the printer The 5 on standby indicator of the printer lights in yellow green G connect a PictBridge compliant digital camera to the PictBridge EXT INTERFACE connector of the printer When you connect a PictBridge compliant digital camera to the printer Connecting is displayed on the LCD display of the printer 5 Operate the digital camera to print an image The printer supports the following prints e Single image print e All images print e Index print e DPOF print e Border Border
11. ENTER the frame becomes larger or smaller You can also enlarge or reduce the size by pressing Q zoom in or Q zoom out buttons on the printer Tip Make the size of the adjustment frame two to seven times as large as the eye size 4 Press lt gt to select fila and press ENTER The range of red eye correction is enlarged 5 Press ENTER The adjustment takes effect The Red eye correction menu is displayed To make a red eye correction for other eyes repeat steps 3 to 5 6 Press lt gt to select and press ENTER The Edit menu is displayed again To reset the adjustment Press CANCEL in step 5 instead of ENTER The red eye correction is canceled and the window of step 2 is displayed Tip To print the image previewed press PRINT page 17 Printing an edited image 1 Press PRINT The dialog box to specify the print quantity is displayed 2 Press A V to increase or decrease the print quantity e To increase the print quantity one by one press A repeatedly e To reduce the print quantity one by one press V briefly repeatedly e To reset the print quantity to 1 press V for more than two seconds 3 Press PRINT to start printing The image previewed is printed Saving an edited image When you select Save in the Edit or Creative Print menu the dialog box to select the destination to save the image is displayed You can save the image under a new image number Tip The selected image
12. First If cleaning cartridge is displayed set the No ink ribbon Insert P size ink lean i id ribbon and press PRINT create CarHiges End of ink ribbon gt Replace it with a new ink ribbon en End of ink ribbon Insert P size ink Read This First ribbon and press PRINT Ink ribbon type incorrect Insert P Set a ink ribbon and print paper of the displayed size ink ribbon and press PRINT size Read This First Print paper No paper tray Insert paper tray gt There is no print paper in the printer containing P size print paper and The paper tray is not set in the printer press PRINT A 4 r The print paper is not set in the paper tray No print paper Set the print paper The print paper has run out for the P Size and press PRINT In either case set the print paper in the tray and set the paper tray into the printer Read This First Cleaning sheet is not placed gt There is no cleaning sheet in the paper tray Set the cleaning sheet and press Insert the cleaning sheet into the paper tray and PRINT set the paper tray into the printer Wrong print paper gt The print paper and ink ribbon do not match Set the print paper for the P Size Check the ink ribbon size actually loaded in the and press PRINT printer and set the print paper for the identical size a Read This First Paper jam Remove Print Paper gt Paper jams See If paper jams page 68 and
13. Memory Stick from the printer while the printer is reading or writing data Data may be damaged in such occasions Memory Stick is removed or the printer is turned off during a read or write operation Memory Stick is used in a location subject to static electricity or electrical noises We recommend that you save backup of the important data The data processed with the computer may not be played with the printer When you format a Memory Stick use the format function of the printer or your digital camera If you format a Memory Stick with your computer images may not be displayed properly When you format a Memory Stick all the data including the protected image files will be erased To avoid erasing important data by accident make sure to check the content before formatting You cannot record edit or delete data if you slide the write protect switch to LOCK Write protect switch Connector Write Write enable protect position position LOCK qa LOCK Place the label here When you use a Memory Stick Duo without the write protect switch be careful not to edit or delete the data by accident When you slide the write protect switch of the Memory Stick Duo use a thin pointed device Do not attach any other material than the supplied label on the labeling position When you attach the supplied label be sure to attach it to the labeling
14. a 4 Complete In case the installation window is not automatically displayed double click the Setup exe of the CD ROM Click Installing Printer Driver Click Next The license agreement dialog box is displayed 4 Read the agreement thoroughly and if you agree check I accept this agreement and click Next Sony DPP FP60 70 90 Printer Driver Installer License Agreement To continue accept the following license agreement To read the entire Ey agreement use the scroll bar or press the Page Down key END USER LICENSE AGREEMENT FOR SONY SOFTWARE IMPORTANT READ CAREFULLY This End User License Agreement License is a legal agreement between you and Sony Corporation SONY regarding your Sony photo printer product or associated accessory the PRODUCT All SONY software and third party software which is i installed in the PRODUCT and or ii recorded in CD ROM media and Memory Stick media attached to the package or included in the package of the PRODUCT or of accessories to the v C new The setup starts When Sony DPP FP60 70 90 printer driver has been successfully installed dialog is displayed click Finish Connect the printer to the AC power source Read This First Press on standby switch to turn on the printer Connect the USB connectors of the printer and your PC with a USB cable not supplied Printer driver installation sta
15. and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local Civic Office your household waste disposal service or the shop where you purchased the product NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience Should the fuse in the plug supplied need to be replaced a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362 i e marked with or Y mark must be used If the plug supplied with this equipment has a detachable fuse cover be sure to attach the fuse cover after you change the fuse Never use the plug without the fuse cover If you should lose the fuse cover please contact your nearest Sony service station Duplication edition or printing of a CD TV programs copyrighted materials such as pictures or publications or any other materials except for your own recording or creation is limited to private or domestic use only Unless you hold copyright or have permission of copyright holders for the materials to be duplicated use of those materials beyond this limit may infringe the provisions of the copyright law and be subject to the copyright holder s claim for damages When using photo images with this printer pa
16. aspect ratio is printed The printing range differs for a border or a borderless print 71 GB UOIJEWIOJU euo ppw Glossary DCF Design rule for Camera File system This camera conforms with the DCF Design rule for Camera File system standard established by JEITA Japan Electronics and Information Technology Industries Association to maintain file exchangeability and compatibility between digital cameras and related products Complete exchangeability and compatibility however are not guaranteed DPOF Digital Print Order Format The format used to record the information necessary for automatically printing images shot by a digital camera at a printing shop or with a home use printer The printer supports DPOF printing and can automatically print the preset number of copies of the DPOF preset images Exif 2 21 Exif Print Exif Exchangeable image file format for digital cameras Print is a global standard for digital photo printing A digital camera supporting Exif Print stores the data relevant to the conditions of shooting as each shot is taken The printer utilises the Exif Print data stored in each image file to ensure the printed result matches the original shot as closely as possible 1 When the Auto Fine Print 4 is enabled and an image JPEG file is shot by an Exif Print Exif 2 21 compliant digital camera the image is automatically adjusted to its optimum picture quality and printed 78 G
17. at http www sony net registration di Continued 41 68 Uninstalling the printer driver Remove the printer driver as follows 1 Disconnect the USB cable not supplied from your printer and the PC 2 Click Start Printers and Faxes 3 Select DPP FP70 or DPP FP90 and click Delete from the File menu The confirmation dialog box is displayed Click Yes ul amp Check to see that DPP FP70 or DPP FP90 is removed from the Printers and Faxes window 6 Click Server Properties from the File menu and click Drivers tab in the Printers Server Properties window J Select Sony DPP FP70 or Sony DPP FP90 from the list box and click Remove The confirmation dialog box is displayed When using the Windows Vista deletion may not be possible You can safely leave it as it is 8 Click Yes 9 Click Close to close the Printers Server Properties window 10 click Start Control Panel The Control Panel window is displayed 11 Open Add or Remove Programs 42 6 12 select Windows Driver Package Sony DPP FP60 70 90 and click Change Remove The confirmation dialog box is displayed 1 3 Click Yes Installing the Picture Motion Browser Follow the procedures below to install the Picture Motion Browser e When using the Windows Vista XP 2000 log on
18. borderless setting of the printer driver When the application software you use has border borderless setting we suggest you select ON for the Borderless Print in the Printer Features of the Sony DPP FP70 FP90 Advanced Options dialog box as the printer driver setting Print quantity setting Depending on the application software you use the print quantity setting of the application you use may have priority over the setting specified in the printer driver dialog box 49 S8 Dd 2e Wolds Buund E Troubleshooting If trouble occurs If you run into any problems using the printer use the following guidance to solve the problem If the problem persists consult your Sony dealer Power Symptom Cause Solutions The on e Is the AC power cord gt Connect the AC power cord to an AC standby switch properly connected outlet securely Read This First cannot be turned on Displaying images Symptom ene cause solutions The LCD screen Does the LCD screen of gt When a PictBridge camera or a PC is displays no the printer show connected to the printer and the images Connecting printer operates on the PictBridge PC mode no images will be displayed on the window Operate with the PictBridge camera or PC To display the images of a memory card or external device remove the PictBridge camera or PC e Are any error messages gt Follow the directions of the message
19. dates of the files that you want to search for Starting date Ending date To exit the menu mode Press MENU again The previous window is displayed 2 Press lt gt to select La Image By Date Search and then press ENTER The Image Search menu is displayed Image Search menu Tip Tosearch forimages ofa specific day enter thesame dateinboth theboxes By Date By Folder No 26 GB e When you select By Folder No Specify the folder number of the images you want to search for Ld By Folder No 1C T l Y h Mcemi sen r sie Fa ENTER om eee 5 Press ENTER Searching starts When the search is complete the search results will be displayed If no images have been found Noimages were found willbe displayed 6 Press ENTER The searched image is displayed The searched results are displayed as the status before you entered the menu When you searched from the image list 01 will be displayed with the relevant images in the image list e If you selected By File No and By Date 01 is displayed on the images found to indicate their print quantity You can easily check the images you selected on the image list If you selected By Folder No the first or last image in the selected folder is displayed Tip To print a searched image p ress IP AN to select the desired image and then press ENTER to display itin the image preview Press AN to set
20. e Zoom the image until the print area is full When checked an image will be printed over the entire printing area of the paper An edge of the photo may be cut When unchecked an image will be printed without cutting off e Print date taken When checked an image is printed with the date of shooting if the image is a file recorded in the DCF Design rule for Camera File system format Properties Specifies paper size orientation picture quality and other details To set the paper orientation or other print options click Properties The Properties dialog box of the selected printer is displayed The printer driver of the printer utilizes the Universal Printer Driver a Microsoft common printer driver In the dialog boxes there are some items that are not used in the printer In the Layout tab specify the paper orientation or other options s Sony DPP FP90 Document Properties Layout Paper Quality Orientation Portrait Landscape Page Order e Front to Back Back to Front Pages Per Sheet 1 OK Cancel Continued 45 08 vu 2 gt a tQ h O 3 00 vu O Items Functions Orientation Select the orientation of an image when printed e Portrait e Landscape Page Order Select the order of the pages when printed e Front to Back e Back to Front Pages Per Sheet Specify the number of copies per sheet to be printed Select 1 Adva
21. image whose selection you want to cancel and press ENTER again 9 Press MENU A confirmation dialog box is displayed 6 Press lt gt to select OK and press ENTER The selected images are deleted Tip Toexit the File operation menu press CANCEL e During deleting donottum off the printer or remove thememory card The printer or the memory card may bedamaged Or the data may belost e Animage once deleted willbe lost forever Before deleting animage double check thatit istherightone e Whenyoudeleteanimagewith the associated file indication Fi theassociated motion ore mail file willbe also deleted e Youcannotdeleteaprotectedimagewith the protectindication Ie ora DPOF preset indication DY displayed To deletethem use your digital camera For the details see the operating instruction of the digital camera Formatting a Memory Stick You can format a Memory Stick T Press MENU The menu bar is displayed 2 Press lt gt to select m File operation and then press ENTER The File operation menu is displayed 3 Press A V to select Memory Stick Format and press ENTER The confirmation dialog box is displayed G Press lt gt to select OK and press ENTER The Memory Stick is formatted e Whenyouformata Memory Stick all the imagesinsideare deleted e During formatting donotturn off the printer orremovethememory card The printer or thememo
22. infringe the provisions of the copyright law On color print packs Notes on use On Ink ribbon e Do not touch the ink ribbon or place the ink ribbon in a dusty location Fingerprints or dust on the ink ribbon may result in imperfect printing e Do not rewind the ink ribbon and use the rewound ink ribbon for printing Otherwise proper printing result will not be obtained or even a malfunction may occur If the ink ribbon does not click into place remove it and then re insert it Only when the ink ribbon is too slack to be loaded wind the spool of the ink ribbon in the direction of the arrow to remove the slack e Never disassemble the ink ribbon e Do not pull out the ribbon from the ink ribbon e Do not remove the ink ribbon while printing On print paper e The side without the imprinting is the printing surface Inferior print quality may result if the printing surface is contaminated with dust or fingerprints Be careful to avoid touching the printing surface e Do not bend the paper or tear it off at the perforations before printing e To avoid paper jam or malfunctions of the printer make sure the following before printing Do not write or type on the print paper Use the oil ink pen to write on the paper after printing You cannot type on the print paper using an ink jet printer etc Do not attach sticker or stamps on the print paper Do not fold or bend the print paper To
23. installed on a PC on which the Cyber shot Viewer is already installed the Cyber shot Viewer will be overwritten and replaced by the Picture Motion Browser The browsing folders once registered in the Cyber shot Viewer will be automatically registered in the Picture Motion Browser When using the Picture Motion Browser you can view the folders easier than you can when using the Cyber shot Viewer as the registered folders are displayed by group when viewing folders With its improved red eye reduction adjustment and newly added tone curve adjustment the Picture Motion Browser also offers more powerful editorial features You can also use the software to write data into an external memory card for taking it outside 40 o U N the printer to the PC When using the Windows Vista XP 2000 log on to Windows as a Computer administrator user account Be sure to close all running programs before installing the software The dialog boxes in this section are those in Windows XP unless otherwise specified The installation procedures and the dialog boxes shown differ depending on the operating system T Turnon your PC start Windows and insert the supplied CD ROM into the CD ROM drive of your PC The installation window is displayed SONY Digital Photo Printer DPP FP60 70 90 Installing Printer Driver Installing Picture Motion Browser w ee Product Registration DNN ENN C a Fi
24. lt gt A V to select the desired color and then press ENTER The window used for adjusting the message angle and position is displayed For information on adjustments see step 6 on page 19 Press lt P gt to select OK and press ENTER The preview of the superimposed message on the background image is displayed To superimpose multiple handwritten characters or preset messages Press lt gt to select Handwritten message or Standard format message and repeat step 4 Tip To save and print the superimposed image previewed see page 17 Viewing a slideshow You can perform a slideshow of the images saved in a memory card or an external device You can also manually print an image being displayed Buttons to be used in this section lt V P A V ENTER PRINT een CANCEL Press MENU The menu bar is displayed Slideshow menu icon Menu bar To exit the menu mode Press MENU again The previous window is ee 2 Press lt gt to select Ip and then press ENTER The Slideshow menu is displayed e Slideshow Slideshow menu Slideshow PS ACN T ER ey f lene MEN aa 3 Press A V to select Switch and then press ENTER The window to specify the way how images are switched is displayed 4 Press A V to select Automatic to switch images automatically or Manual to switch them manually Then press ENTER 5 Press A V to select Execute and press ENTE
25. or lt to lighten the colors e Sharpness Press gt to sharpen the outlines or lt to soften them Press ENTER The adjustment takes effect The Edit menu appears again To print the image previewed press PRINT page 17 Adding a special filter to an image 1 Display the Edit menu page 12 2 Press lt gt to select Filter and then press ENTER The Filter menu is displayed Filter icon Ck a Ct Filter Filter menu Cross Filter Partial Color Sepia Monochrome FA FA ENTER to select item 3 Press A V to select the desired filter you want to add to the image e No Filter No special filter on the image default setting effect to the light source to print an image with sparkling impression Partial Color Makes the surroundings of the subject in monochrome to emphasize the subject in the center e Sepia Changes the image like an old photograph with faded colors e Monochrome Changes the image into a black and white picture e Paint Makes the image look like a painted picture e Fish eye Makes the image look like a photo taken with a fish eye lens 4 Press ENTER The filter takes effect Cross Filter Adds a cross starburst When you have selected Cross Filter the setting window is displayed D set the level and range for Cross Filter Select Level with A V and press ENTER adjust level of retouch with A V then press ENTER The higher the le
26. to Windows asa Computer administrator user account Be sure to close all running programs before installing the software The dialog boxes in this section are those in Windows XP unless otherwise specified The installation procedures and the dialog boxes shown differ depending on the operating system T Turnon your PC start Windows and insert the supplied CD ROM into the CD ROM drive of your PC The installation window is displayed page 40 2 Click Installing Picture Motion Browser The Choose Setup Language dialog box is displayed 3 Select your language and click Next The Location settings dialog box is displayed 4 Select the Region and Country Area where you use the printer and click Next The InstallShield Wizard dialog box is displayed 9 Click Next The license agreement dialog box is displayed 6 Read the agreement thoroughly and if you agree check I accept the terms of the license agreement and click Next Sony Picture Ut and or territory throughout the world except for Japan the A fol he on sd esha a S YOU SHOULD CAREFULLY READ THE bie elt ERD USER LICENSE AGREEMENT BEFORE USING THIS SOFTWARE Nam e Sony Picture Utility AND ITS RELATED MATERIALS COLLECTIVELY THE SONY SOFTWARE END USER LICENSE AGREEMENT and int nal copyri eat atie The SONY SOFTWARE i ice sed The dialog box used to specify the des
27. white red blue or green in color that constantly appear on the LCD screen These points are normal in the manufacturing process and do not affect the printing in any way e Images may trail across on the LCD screen in a cold location This is not a malfunction On trademarks and copyrights e Cyber shot is the trademark of Sony Corporation gt a e Memory Stick meworstick w Memory Stick PRO Memory STICK PRO Memory Stick Duo MEMORY STICK DUD Memory Stick PRO Duo Memory STICK PRO Duo MagicGate and MAGICGATE Memory Stick Micro M2 are trademarks of Sony Corporation e This unit is equipped with face recognition feature Sony Face Recognition technology developed by Sony is used e The BLUETOOTH trademarks are owned by Bluetooth SIG Inc U S A and licensed to Sony Corporation e Microsoft Windows Windows Vista and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries e IBM and PC AT are registered trademarks of International Business Machines Corporation e Intel and Pentium are the registered trademarks or trademarks of Intel Corporation e XD or xD Picture Card is a trademark of xD Picture Card Fuji Photo Film Co Ltd 3 GB e CompactFlash is a trademark of SanDisk Corporation in the U S A e FotoNation the U S A e All other companies and product names mentione
28. with the rest of the package immediately to the dealer where you obtained it Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice The software described herein may also be governed by the terms of a separate user license agreement Any design data such as sample pictures provided in this software cannot be modified or duplicated except for the purpose of personal use Any unauthorized duplication of this software is prohibited under copyright law Please note that unauthorized duplication or modification of others portraits or copyrighted work could infringe the rights reserved by right holders You may be referred to the supplied Read This First when there are detailed explanations in the leaflet On the illustrations and screen status used in this manual The illustrations and screen status used in this manual are of the DPP FP70 unless noted otherwise Table of contents Before you begin Identifying the parts ccccseeeeeeees 6 LCD screen display scceccseseseeeseesees 8 An image preview cee icxsecestinsnsesacearaesesencinns 8 VAG OY tcena viataiseasdacaumesaaune 9 Making various printing Correcting a failed photo automatically AUTO TOUCH UP eeeeeeeeees 10 Printing with the AUTO TOUCH UP AdUStMEN TE sann a 10 Making easy printing Index DPOF All 11 Editing an image csese
29. 000 Sony Picture Utility Picture Motion Browser The Information Tool window is displayed When the Picture Motion Browser is started for the first time The dialog box to register a viewed folder is displayed If images have already been saved in the My Pictures folder click Register Now If you have saved images in a folder other than the My Pictures folder click Register Later Refer to To register a browsing folder page 48 How to access the My Pictures folder e In Windows 2000 Click My Documents My Pictures on the desktop e In Windows Vista XP Click Start My Pictures from the taskbar 44 S8 2 Click Start Information Tool This Information Tool automatically notifies you of new product information such as the availability of updates for Sony Picture Utility You must be connected to the Internet to use this Feature If you select Notification Off automatic notification will be turned off and product and update information will not be retrieved when the Sony Picture Utility starts Note To turn on automatic notification later start the Information Tool From the Windows Start menu and change the automatic operation setting The main window of the Picture Motion Browser is displayed To switch the display of the main window There are 2 different versions of photo view u
30. 30 Address This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Declaration of Conformity Trade Name SONY Model No DPP FP90 Responsible Party Sony Electronics Inc 16530 Via Esprillo San Diego CA 92127 U S A Telephone No 858 942 2230 Address This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation 2 GB Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning
31. 56 MB or more is recommended Hard disk space 200 MB or more Depending on the Windows version you use more space will be required To handle image data you will need additional hard disk space Display Screen resolution 800 x 600 pixels or more Colors High Color 16 bit or more Required software DirectX 9 0c or higher Required for the Picture Motion Browser Continued 39 GB Dd 2e Wolds BulyuLig a e If a hub is used to connect the printer and your PC or if two or more USB devices including other printers are connected to your PC a trouble may occur If this occurs simplify the connections between your PC and the printer Installing the printer driver Follow the procedures below to install the driver e Before installing the driver do not connect e You cannot operate the printer from another USB device being used simultaneously Do not remove the USB cable from or connect it to the printer during data communication or printing The printer may not work properly Do not allow the PC connected to the printer to switch to standby mode or hibernation mode during printing If you do so the printer may not print properly We cannot guarantee operations with all PCs even though they may meet or exceed the system requirements Picture Motion Browser supports the DirectX technology and the DirectX installation may be required DirectX is available in the CD ROM If the Picture Motion Browser is
32. B Memory Stick CompactFlash card SD card Compact light removable storage media For details see pages 72 to 75 PictBridge A standard specified by Camera amp Imaging Products Association that allows you to connect PictBridge complaint digital camera directly to the printer without a PC enabling direct printing on the spot Thumbnails Miniature images for representing the original images that are stored in the image files taken by a digital camera The printer uses thumbnails in the image list Superimpose characters glossary You can use the characters here to superimpose onto an image Please take a picture of the desired characters in advance and follow the procedures for superimposing handwriting in pages 23 and 24 to trim the necessary portion and superimpose it onto an image Happy New Year Seasons Greetings Happy Holidays Thank You Happy Birthday 79 GB UO EWIOJU EUOIIPPY Additional information 81 GB Index A Adjusting an image 14 All printing 11 Associated file indication 8 Auto Fine Print4 31 47 AUTO TOUCH UP 10 47 B Bluetooth device 36 Borders Borderless 31 47 C Calendar 20 Changing the display 8 Cleaning 68 Color print packs Notes on use 71 Color Setting 32 CompactFlash card Notes on use 74 Types 74 Connecting Bluetooth device 36 Digital camera 35 External device 38 PC 41 Copying an image 27 Creative Print 18 Cross Filter 15
33. Printing symptom he cause solutions Paper does not feed The print paper emerges partially during printing in process e Is the print paper properly gt If print paper is not properly loaded set in the paper tray e Does the ink ribbon or print paper run out e Are you using print paper that was not designed for the printer e Is the print paper jammed e Is it in the middle of the printing process the printer may develop trouble Read This First Check the following e Insert the correct set of print paper and ink ribbon e Load the print paper in the correct direction in the tray e You can insert the maximum 20 sheets of print paper into the tray If the sheets exceeds 20 remove the extra sheets e Riffle the print paper thoroughly and insert them into the tray e Do not bend or fold the print paper before printing which may cause malfunction with the printer gt If an error message is displayed on the screen check the error message gt Use print paper designed for the printer If you use incompatible print paper the printer may develop trouble Read This First gt When the printer cannot feed the print paper an error message is displayed Check paper jam page 68 gt The print paper may emerge a few times during printing Do not touch nor pull the emerged paper Wait for the print paper to be fully ejected after printing ends As the print paper emerges f
34. R The image is fixed to the position Tip To print the image previewed press PRINT page 17 13 GB Adjust icon Adjust menu Rotating an image Display the Edit menu page 12 L Adjust 2 Press lt gt to select EY Rotate and then press ENTER The Rotate menu is displayed Rotate icon Rotate menu Tint Saturation Sharpness L E a E to select item Rotate Rotate 90 Counterclockwise 3 Press A V to select the desired oa adjustment tool and press ENTER The adjustment slider appears When Brightness is selected Lg mf tt La F4 PA ENTER to select item 3 Press A V to select the direction to rotate the image and then press ENTER e Rotate 90 Clockwise Each time you press ENTER the image rotates 90 clockwise e Rotate 90 Counterclockwise Each time you press ENTER the image rotates 90 counterclockwise 4 to r o NEPA ETER to fix Adjustment slider 4 Move the slider to the desired Tip a To print the image previewed press PRINT position to adjust the level page 17 e Brightness Press gt to brighten the picture or lt to darken it e Tint Press gt to make the picture Adjusting an image bluish or lt to make it reddish 1 2 Display the Edit menu page 12 Press lt gt to select Adjust and then press ENTER The Adjust menu is displayed 14 68 Tip e Saturation Press gt to deepen the colors
35. R e When Automatic is selected The images in the memory card or an external device are displayed automatically one after another e When Manual is selected The image with the cursor in the image list is displayed To switch images press lt gt To stop slideshow Press CANCEL Tip While playing theslideshow manually youcan printa displayed image by pressing PRINT e Depending on theimage itmay taketimeto bedisplayed e Youcannotdisplay theimagesthatarenot displayed as thumbnailsbecause they are damaged orforsomeotherreason 25 GB Buluud snouen Buie N 3 Press A V to select the search key Searching for an image and press ENTER The dialog box used for specifying The Search menu allows you to search a the criteria for searching is displayed memory card or an external device for an image by image number or date 4 Press lt gt to select an item and press A V to specify numbers e When you select By File No Youcansearch fortheimagessaved as DCF Specify the starting and ending filesonly numbers of the files folder and file Buttons to be used in this section numbers that you want to search for Starting image Ending image lt VE A V ENTER number number By File No T Press MENU The menu bar is displayed Image Search menu icon Tip Theabovescreenis whena Sony Cyber 4 La shotdigitalcameraisconnected e When you select By Date Specify the starting and ending
36. SONY Digital Photo Printer DPP FP70 FP90 Operating Instructions Before operating this unit please read Read This First supplied and this manual Operating Instructions thoroughly and retain them for future reference Owner s Record The model and serial numbers are located on the bottom Record the serial number in the space provided below Refer to these numbers whenever you call upon your Sony dealer regarding this product Model No DPP FP70 FP90 Serial No COATS worms A PictBridge 3 097 069 13 1 Before you begin Making various printing Printing from a PictBridge camera or external device Printing from a PC Troubleshooting Additional information Please read the supplied Read This First 2007 Sony Corporation WARNING To reduce fire or shock hazard do not expose the unit to rain or moisture For the customers in the U S A CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment If you have any questions about this product you may call Sony Customer Information Services Center 1 800 222 SONY 7669 The number below is for the FCC related matters only Regulatory Information Declaration of Conformity Trade Name SONY Model No DPP FP70 Responsible Party Sony Electronics Inc 16530 Via Esprillo San Diego CA 92127 U S A Telephone No 858 942 22
37. Y 3 Press lt gt A V to select the desired template then press ENTER The preview of the selected template is displayed Image area SLF AFA ENTER to select item Tip You can select and set each area in any order 4 Press lt P A V to select the desired image area and press ENTER The window for selecting an image is displayed 5 Press lt gt A V to select the desired image and then press ENTER The window used for adjusting the image position is displayed Adjustment tools 6 Adjust the size and position of the selected image Press lt gt to select the desired adjustment item then press ENTER Items Procedures Q Increases or reduces the size of an image by pressing the buttons on the printer Y Move the image with lt 4 A V and then press ENTER Each time you press ENTER gt the image rotates 90 clockwise AUTO TOUCH UP Automatically adjusts a failed photo having problems such as backlit out of focus or red eye phenomenon by pressing the button on the printer Continued 19 C8 Bunuud snouen buyer 7 Tip Press lt gt to select 0K and press ENTER The selected image is added to the image area When you select a template with multiple images repeat the steps 4 through 7 to select an image for each area To save or print the layout images previewed see page 17 Making a calendar You can make calendars with your favorite
38. able or erased Specifications E Printer Printing method Dye sublimation printing Yellow Magenta Cyan 3 pass Resolution 300 H x 300 V dpi Image processing per dot 256 levels processing 8 bits for each Yellow Magenta Cyan Printing size P Post Card 4 x 6 inch size 101 6 x 152 4 mm maximum borderless Printing time per sheet Memory card Approx 45 sec PictBridge Via PC Input Output connectors USB Full Speed for PC connection PictBridge EXT INTERFACE connector Slot Memory Stick insertion slot Approx 56 sec Approx 50 sec SD Card insertion slot CompactFlash card insertion slot Compatible image file formats JPEG DCF 2 0 compatible Exif 2 21 compatible JFIF TIFF Exif 2 21 compatible BMP 1 4 8 16 24 32 bits Windows format Some image file formats are not compatible Continued 75 GB UOIJEWIOJU JEUOILIPPY Maximum number of pixels to be handled 8 000 H x 6 000 V dots Excluding Index Print and part of Creative Print Maximum number of files to be handled 9 999 files for a memory card an external device Ink ribbon Print Paper See supplied Read This First LCD screen LCD panel DPP FP70 6 2 cm 2 5 type TFT drive DPP FP90 9 0 cm 3 6 type TFT drive Total number of dots DPP FP70 115 200 480 x 240 DPP FP90 230 400 320 RGB x 240 Power requirements DC IN jack DC 24V Power consumption While printing 80 W maximum On standby mod
39. becomes as if yellow is added S The higher you set the level the more distinct the outlines become R 0 G 0 B 0 8 0 Factory settings Changing the display and printer preferences Display Printer setup The Display Printer setup menu allows you to change the display and printer preferences listed on page 34 Buttons to be used in this section lt U P A V ENTER d Press MENU The menu bar is displayed Display Printer Menu bar setup menu icon ELFA ENTER to select item To exit the menu mode Press MENU again The previous window is displayed 2 Press lt gt to select Display Printer setup and then press ENTER The Display Printer setup menu is displayed Display Printer setup menu Display Printbr setup Icon On Date Display Order Y M D LCD Backlight Bright Demonstration Mode On FA ENTER METI ENU aa Press A V to select the desired setting item and press ENTER The setting window for the selected item is displayed next page To display the hidden setting items scroll the window with A V During Editor Creative Printoperations someitemscannotbeselectedand changed Thoseitemswhichcannotbe changedaredisplayedin gray Press A V to select the desired setting and press ENTER The setting is fixed Toexitthe Display Printer setup menu press MENU Continued 33 GB 6uizuud snouen Buie N Item Settings Contents Listing Order Icon
40. ck the memory card or an trouble external device status with another device In case of an external device An external device might be write protected Release the write protection setting of the device you use A built in memory of a digital camera Memory Stick Format Error may be write protected Write error in the Memory Stick the CompactFlash card the SD Card the External Device Memory Stick is protected gt A protected Memory Stick is inserted To save or edit the images with the printer use the device you are using to cancel protection External devices and PictBridge compliant devices Incompatible USB device gt A USB device that the printer does not support Check device s USB setting may be connected Or the USB settings of the connected device may be incompatible Refer to the operating instructions of the USB device you are using USB hub or device with built in gt Connect the device directly to the printer or use a hub not supported device that does not contain a USB hub function Write error in External Device gt An external device might be write protected Release the write protection setting of the device you use A built in memory of a digital camera may be write protected 66 GB Ink ribbon Error messages Meaning Solutions No ink ribbon Insert ink ribbon gt The ink ribbon is not inserted in the printer Set and press PRINT the ink ribbon into the printer Read This
41. cked by qualified personnel before operating it any further e Never disassemble the printer e To disconnect the power cord pull it out by the plug Never pull the power cord itself e When the printer is not going to be used for an extended period of time disconnect the power cord from the wall outlet e Do not handle the printer roughly e To reduce the risk of electrical shock always unplug the printer from the electrical outlet before cleaning and servicing the printer On installation e Avoid placing the printer in a location subject to vibration high humidity excessive dust direct sunlight extremely high or low temperatures Do not use electrical equipment near the printer The printer will not work properly in electromagnetic fields e Do not place heavy objects on the printer e Leave enough room around the printer so that the ventilation holes are not blocked Blocking these holes may cause internal heat build up 70 GB On the AC adaptor e Be sure to use the AC adaptor supplied with the printer Do not use other AC adaptors as this may cause a malfunction e Do not use the supplied AC adaptor to other devices e Do not use an electrical transformer travel converter as this may cause overheat or a malfunction In case the cord of the AC adaptor is damaged never use it any longer as this may cause danger On moisture condensation If the printer is brought
42. cture quality so that an image may be printed in more vivid clear and beautiful pictures It is especially effective for a darker image with low contrast The pictures are corrected to reproduce natural skin colors vivid tree leaf green or clear sky blue e Photo Adjusts an image automatically so that the image is printed with natural and beautiful pictures Recommended e Vivid Adjusts an image automatically so that the image is printed with stronger sharpness correction and more vivid pictures than the Photo mode Tip For theimagesshotby an Exif Print Exif2 21 compliant digital camera they are adjusted to their optimum picture quality e Theimagedataisnotcorrected e When printing in PC mode the Auto Fine Print 4 setting with the printer driver has priority over thesetting here Inthe PictBridgemode this setting holdseffective Prints an image without any corrections Prints an image with borders around the image To leave almost equal borders in the top bottom right and left around an image select Pattern2 To pint an image without being cut select Pattern1 When youselect Pattern2 the top and bottom edgesor rightand leftedgesmay be trimmed and printed depending ontheimage Prints an image without blank space around the image When printing astandard 4 3 pictureshotby a digital camera thetop and bottom edges of theimagearecutand itis printed asa 3 2 picture Pattern1 Pattern 2 Borde
43. d Press 4 gt A V to select an image you want to superimpose and press ENTER Select the image of handwritten characters or illustrations you have prepared in advance The trimming cursor is displayed Press gt A V to specify the beginning point of the area to be superimposed then press ENTER Superimpose Happy Birthday St eed CNT ER MDE CEACE stella Press gt A V to specify the ending point of the area then press ENTER Continued 23 GB 6uund snouen Buyer Superimpose Happ Birthday lt p gt APENT ER BDE CE point The color selection window is displayed To return to the previous step Press CANCEL Press lt 1 gt A V to select the desired color and then press ENTER The window used for adjusting the superimposed image angle and position is displayed For information on adjustments see step 6 on page 19 Press lt P to select fA and press ENTER The preview of the selected image superimposed on the background image is displayed E Superimposing a standard format message Press lt P gt to select Standard format message then press ENTER The window for selecting preset message is displayed 24 68 Superimpose wine are ees Happy Birthday A Happy New Year Thank You Congratulations Select fixed phrase 4 ENTER D Press A V to select the desired message and press ENTER The color selection window is displayed Press
44. d herein may be the trademarks or registered trademarks of their respective companies Furthermore and are not mentioned in each case in this manual e The raster process of true type fonts is based on the FreeType Team software is a trademark of FotoNation Inc in e This software is based in part on the work of the independent JPEG Group e Libtiff Copyright 1988 1997 Sam Leffler Copyright 1991 1997 Silicon Graphics Inc Permission to use copy modify distribute and sell this software and its documentation for any purpose is hereby granted without fee e Zlib 1995 2002 Jean loup Gailly and Mark Adler 4 GB Notice for users Program 2007 Sony Corporation Documentation 2007 Sony Corporation All rights reserved This manual or the software described herein in whole or in part may not be reproduced translated or reduced to any machine readable form without prior written approval from Sony Corporation IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL CONSEQUENTIAL OR SPECIAL DAMAGES WHETHER BASED ON TORT CONTACT OR OTHERWISE ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF By breaking the seal of the envelope of the CD ROM package you accept all the terms and conditions of this agreement If you do not accept these terms and conditions please return this disk envelope unopened along
45. de To print in colors select True Color 24bpp To print in monochrome select Monochrome For details see the Windows help Items Functions Printer Features e Borderless Print To print an image without borders select ON To print with borders select OFF Depending on the application software an image will be printed with borders even if ON is selected Set an image to be printed fully in the print range e Auto Fine Print4 Select from Photo Vivid or OFF When you select Photo or Vivid please select ICM Disabled for ICM Method Unlike direct printing from a memory card no Exif data is referred For details see page ol e Auto Touch up Select ON or OFF When you select ON please select ICM Disabled for ICM Method Unlike direct printing from a memory card no Exif data is referred For the details see page 10 e Color Setting You can change R G B and sharpness settings For the details see page 32 9 inthe Paper Quality tab specify the color or paper source Sony DPP FP90 Document Properties Layout Paper Quality Tray Selection Paper Source Automatically Select v Color Di wo O Black amp White iJ OK Cancel Items Functions Tray Selection From the Paper Source drop down list box elect Automatically Select Color To print in colors sel
46. directly from a cold location to a warm location or placed in an extremely warm or humid room moisture may condense inside the unit In such cases the printer will probably not work properly and may even develop a fault if you persist in using it If moisture condensation occurs unplug the AC power cord of the printer and do not use the printer for at least one hour On transport When you transport the printer remove the ink ribbon paper tray AC adaptor the memory card or an external device from the printer and put the printer and its peripherals in the original box with the protective packaging If you no longer have the original box and packing parts use similar packing material so that the printer will not be damaged while being transported On cleaning Clean the cabinet panel and controls with a soft dry cloth or a soft cloth lightly moistened with a mild detergent solution Do not use any type of solvent such as alcohol or benzine which may damage the finish On restrictions on duplication If duplicating documents with the printer pay special attention to the following e Duplication of banknotes coins or securities is against the law e Duplication of blank certificates licenses passports private securities or unused postal stamps is also against the law e TV program films video tapes others portraits or other materials may be copyrighted Unauthorized video printing of such materials may
47. e less than 1W Operating temperature 5 C to 35 C 41 F to 95 F Dimensions DPP FP70 Height Approx 63 mm 2 1 inches printer Approx 72 mm 2 inches including LCD projecting parts Width Approx 180 mm 7 inches Depth Approx 137 mm 5 inches excluding a handle Approx 149 mm 5 7 inches including a handle 76 GB DPP FP90 Height Approx 66 mm 2 inches Approx 180 mm 7 inches Approx 137 mm 5 inches excluding a handle Width Depth Approx 149 mm 5 7 inches including a handle Depth when the paper tray is installed Approx 169mm 6 inches longer than the above depth Mass DPP FP70 Approx 1 1 kg 2 lb 7 0z DPP FP90 Approx 1 2 kg 2 lb 10 oz excluding the paper tray ink ribbon AC power adaptor Supplied accessories See supplied Read This First E AC power adaptor AC S2422 Power requirements AC 100V to 240 V 50 60 Hz 1 5A to 0 75 A Rated output voltage DC 24 V 2 2 A Peak 3 7 A 6 5 s Operating temperature 5 C to 35 C 41 F to 95 F Dimensions Approx 60 x 30 5 x 122 mm 2 x1 x47 inches w h d excluding protruding parts and cables Mass Approx 305 g 11 oz Design and specifications are subject to change without notice The total number of sheets of P size print paper that the printer can print is estimated to be approximately 2 000 For the total number of sheets please check Prin
48. ect Color To print in monochrome select Black amp White Advanced The DPP FP70 FP90 Advanced Options dialog box is displayed page 46 For details see step 8 10 click ox The Print dialog box is displayed again 11 click Print Printing starts For the details of the properties of the Picture Motion Browser see the Picture Motion Browser help You cannot print a motion picture file or RAW data files Continued 47 68 Dd e Wold Bunud O Tips e To select serial still images in the image area of the main window click the first image in the series and then click the last image while pressing the Shift key To select multiple still images not in a sequence click the images individually while pressing the Ctrl key e You can also print from an image preview To display the Windows help Click 2 on the upper right on the dialog box and then click the desired item on the screen To stop printing T Double click on the printer icon on the taskbar and open the Print dialog box 2 Click the document name that you want to cancel printing of and then click Cancel from the Document menu The dialog box used for confirming the deletion is displayed 3 Click Yes The printing job is canceled Do not remove the job being printed Doing so may cause paper jam To register a browsing folder The Picture Motion Browser does not al
49. er or not a digital camera supports the AdobeRGB see the operating instructions of the digital camera Continued 55 GB Bbulzoousajqnoi symptom Chek eeuse solutions The picture quality and colors of the image previewed on the screen differs from those printed The printed image differs when an image is directly printed from the memory card or an external device inserted into the printer s slot and when it is printed via a PC The date cannot be printed The date is printed unintentionally 56 GB e Is Date Print set to Qn e Does the image support DCF e Is Date Print set to Off e Was the date saved with the image when it was shot with the digital camera gt Because of differences in the phosphor method or profiles of a LCD screen please regard the image being displayed on the display as just a reference To adjust picture quality do either of the following Menu Print setup Color Setting page 32 Menu Edit Adjust page 14 The setting takes effect only on the image being displayed gt Because of the differences in the printer s internal processing and PC software processing the printed images will be different gt Set Date Print in the Print setup menu to On page 32 gt The Date Print function of this unit supports an image that is compatible with the DCF standards gt Set Da
50. es which are DPOF Digital Print Order Format preset for pon are displayed with the print mark Y in an image preview You can print those images at one time The images are printed with the preset number of copies in the order they were displayed e All images printing You can print all the images stored in a memory card or an external device at one time e For how to preset images for printing see the manual of your digital camera e Some types of digital cameras do not support the DPOF function or the printer may not support some of the functions of the digital camera Buttons to be used in easy printing lt U E A V ENTER CANCEL MENU T Press MENU on the printer The menu bar is displayed Easy Printing icon Menu bar Easy Printing To exit the menu mode Press MENU again The previous window is displayed 2 Press lt gt to select A_F Easy Printing and then press ENTER The Easy Printing menu is displayed Easy Printing menu Easy Printing DPOF Print Print All PS ACN T ER cyt a MEN aa A Continued 11 68 lt D a 5 Co lt S Z O c Nn re 5 5 5 Co 3 Press A V to select Index Print DPOF Print or Print All and then press ENTER The confirmation dialog box is displayed If there are no DPOF preset images when you selected DPOF Print an error message will be displayed 4 Press lt gt to select Yes to start printin
51. ewed see page 17 An ID photo print may not be able to be used for an identification card or passport Please check the requirements for the photo to be used in the certificate before you submit the card or passport Superimposing a message on an image You can place a preset message handwritten characters or illustrations on an image superimposing Tip To superimpose a handwritten characters or illustration draw them with a black ink pen on a white paper shoot them with a digital camera and save them on a memory card You can also use Superimpose characters glossary on page 79 1 Display the Creative Print menu page 18 2 Press lt D gt A V to select Superimpose then press ENTER The window used for selecting the background image is displayed 3 Select an image for background Press gt A V to select an image for background then press ENTER The window used for adjusting the image angle and position is displayed For information on adjustment see step 6 on page 19 Press lt 1 gt to select MA and then press ENTER Preview window is displayed 4 Superimpose a handwritten or standard format message over the background image E To superimpose a handwritten message Press lt P gt to select Handwritten message then press ENTER T ll a x Handwritten message at ENTER Bitomect k oi a The window for selecting an image to be superimposed is displaye
52. g onto Windows Vista XP 2000 Professional using an Administrator user account The printer does not respond to the printing order from the PC e Is an error message displayed stating that an error was detected in output of documents via USB e Are you using an application software other than Picture Motion Browser An image is printed with borders even if I select Borderless gt If there is an anti virus program or other program running on the system exit it and then start installing the driver gt To install the driver in Windows Vista XP 2000 Professional log onto Windows using an Administrator user account gt If there is no trouble displayed on the Windows desktop check the printer s LCD screen If the printer shows trouble do the following 1 Turn off the on standby switch then turn it on again 2 Disconnect the power cable wait for 5 to 10 seconds and then connect the cable again 3 Restart your computer If these do not solve the problem consult with your Sony dealer or service facilities gt Remove the USB cable and then connect it again gt When using an application other than the Picture Motion Browser an image might be printed with borders even if you select borderless print When you can set border borderless with an application set an image to be printed fully in the print range even if it is printed over the range Continued 63 GB
53. g or No to cancel printing and then press ENTER When you select Yes printing starts During printing the PRINT indicator flashes and the printing process is displayed To stop printing Press CANCEL When you are printing multiple copies the next printing after the one currently printing will be canceled When printing is completed the print paper automatically emerges on the paper tray 5 Remove the print paper from the paper tray Tips e Even if the remaining volume of the ink ribbon is shorter than the print quantity you can proceed with printing If the ink ribbon runs out in the middle of printing and a message appears follow the displayed instructions to replace the ink ribbon see Read This First e When the Date Print item of the Print setup menu is set to On the date the image was shot or saved is printed page 32 12 GB Editing an image Displaying the Edit menu You can display the Edit menu and edit or add an effect to an image You can print or save an image being previewed Buttons to be used in the Edit menu lt V P A V ENTER PRINT CANCEL IA cs EE N j pA MENU 1 Display the image that you want to edit Display the image in the image preview window or move the Cursor to the desired image in the image list 2 Press MENU on the printer The menu bar is displayed Edit menu icon Menu bar Lad CN TER Maa E I To exit t
54. g printed The original image will not be adjusted e Depending on the image face may not be automatically detected If brightness of face is not adjusted properly use the Edit Adjust menu to adjust the brightness manually page 14 e Depending on the image out of focus phenomenon may not be corrected In this case use the Sharpness of the Edit Adjust menu to adjust the sharpness manually e Out of focus reduction does not take effect on blur caused by shaking of the camera e Depending on the image red eye phenomenon may not be corrected In this case use Red eye correction to make red eye adjustments manually page 16 The automatic red eye correction of this printer uses the technology of FotoNation Inc in the U S A by FotoNation Making easy printing Index DPOF AIl The Easy Printing menu allows you to print multiple images stored on a memory card or an external device at one time The printer provides the following three easy printing methods e Index printing You can print a list index of all the images contained in a memory card or an external device which allows you to check the contents of the selected media easily The number of split panes on a sheet will be calculated automatically Images are printed with their corresponding image numbers folder number file number Image numbers Date If Date Print is on fe fa i Bs a a A FEA f e DPOF preset image printing The imag
55. ge compliant digital camera a mass storage device such as a USB memory or photo storage Bluetooth USB adaptor DPPA BT1 or other external USB device connect it into this connector In some regions the Bluetooth USB adaptor DPPA BT1 is not sold 7 GB Each time you press ENTER an image LCD screen display display mode changes To display a different image press lt P gt An image preview 1 Input setting indications Input indications and settings Image data information for an image are displayed Icons Meaning Memory Stick or Memory Stick Duo input SD miniSD Card input CompactFlash input External Device input Protect indication DPOF preset indication Associated file indication Displayed when there is an associated file such as a motion file or a miniature e mail image file SR ERS i No image data display d 2 Number of the selected images Total number of image Ink ribbon indication P P size C Cleaning cartridge 4 Image number folder file number DCF compatible files only In case of other file formats only part of file name will be displayed Operation tips 6 Saved date year month day Print quantity You can set the print quantity up to 20 e To increase the print quantity one by one press A repeatedly e To reduce the print quantity one by one press V briefly repeatedly e To reset the print quantity to 0 immediately pres
56. he menu mode Press MENU again The previous window is displayed 3 Press lt gt to select L Edit and then press ENTER The Edit menu is displayed Edit menu Cy Cursor sad CN TER aami Items Procedures Increases or reduces the Q Q size of an image by pressing the buttons on the printer Moves an image e Rotates an image Adjusts the picture quality prun pe s of an image 9l L Reduces the red eye phenomenon Undoes the editing just done and resets the image to the status before editing Saves the edited image Exits the Edit menu Adds an filter to an image Enlarging and reducing an image size 1 2 Display the Edit menu page 12 Press Q zoom in to enlarge an image or Q zoom out to reduce the size of it Each time you press the button the image becomes larger or smaller Q up to 200 Q up to 60 The picture quality of an enlarged image may be deteriorated depending on its size Moving an image 1 2 Display the Edit menu page 12 Press lt gt to select W Move and then press ENTER The lt A V appears on the left right above down the image and you can move the image Move the image with lt P A V The image moves to the selected direction C 6Buluud snouen Buyer Tip You can set part of the Print setup menu items from MENU while editing an image 4h ato Neha Fa ENTER daii gia 4 Press ENTE
57. he operations of all the Memory Stick media 4 M2 is an abbreviation for Memory Stick Micro In this section M2 is used to describe Memory Stick Micro For the latest information on available medium or others access the following home page http www memorystick com en support support html Select the area where you use your printer and then select Digital Printer from each area page Notes on use e For the latest information on the Memory Stick that the printer supports see the Memory Stick compatibilities information on the Sony web site e Do not insert multiple Memory Stick at the same time which may cause trouble with the printer e When using a Memory Stick make sure to check correct insertion direction Wrong usage may cause trouble with the printer e When using the Memory Stick Micro with the printer always insert it into an M2 adaptor e If you insert the Memory Stick Micro into the printer without an M2 adaptor you may be unable to remove the Memory Stick Micro e If you insert the Memory Stick Micro into an M2 adaptor and insert the M2 adaptor into the Memory Stick Duo adaptor the printer may not operate properly e Do not place the Memory Stick Duo an Memory Stick Duo sized M2 adaptor or M2 media within the reach of a small child to prevent him from swallowing it by accident e Avoid removing the
58. indications 8 SD Card Notes on use 74 Types 74 Searching for an image 26 Sepia 15 Setting the print quantity 8 Slideshow 25 Special filter 15 Specifications 75 Superimposing 23 Switching the screen display 9 System requirement 39 T Troubleshooting 50 U Uninstalling Picture Motion Browser 43 Printer driver 42 Unit 34 USB memory 38 W Write protect switch 73 Z Zoom in 9 Zoom out 9 83 GB UOIJEWIOJU EUOIIPPY Printed using VOC Volatile Organic Compound free vegetable oil based ink Sony Corporation Printed in China
59. less print e Date print For notes during printing please read Read This First To PictBridge EXT INTERFACE connector PictBridge EXT INTERFACE Camera or other external device e Ifyoureplaceaninkribbon while the printer isconnected toa PictBridge compliant digital camera animagemay notbe printed properly Ifthis occurs disconnectand then connectthe digital camera When printing froma PictBridge compliant digital camera animage willbe printed according to the settings of the Printsetup menuofthe printer When youset the date print orborder borderless options with your digitalcamera the digital camerasettings will have priority Ifyouselect Borderless with the printerand Border with yourcamera the Pattern1 willbeused forprinting Forerrormessages displayed on your digital camera refer tothe operating instructionsof your digital camera Youcannotusea USB hub ora digital camera containing USB hub 35 GB x 5 a 5 O R x O 3 9 Y A et Se as O Q MD A S 3 D s D O TS D x ct D 5 a o O A MD Printing from a Bluetooth compliant device By connecting the Sony DPPA BT1 Bluetooth USB adaptor to your printer you can print an image of a Bluetooth compliant mobile phone digital camera or other device e Donotusethe DPPA BT1 outsides the area youpurchased it Depending onthe areas the useoftheadaptor may infringethe wave regulationsand may be
60. ll the supplied software on your PC and how to use the supplied Picture Motion Browser software to print an image Please also refer to the operating instructions supplied with your PC for operating the PC Installation of the software is necessary only when you connect the printer to your PC for the first time On the supplied CD ROM The supplied CD ROM contains the following software e Printer driver for DPP FP70 FP90 The software describes the printer s requirements and enables printing from the PC Picture Motion Browser Sony s original software application that allows you to handle photographs and moving images capturing managing processing and printing Installing the software System requirements To use the supplied printer driver and Picture Motion Browser your PC must meet the following system requirements OS Microsoft Windows Vista Windows XP Professional 7 Windows XP Home Edition Windows 2000 Professional Service Pack 3 or later pre installed 1 Excluding Starter In addition the Picture Motion Browser does not support the 64 bit version 2 The 64 bit version is not supported Windows 95 Windows 98 Gold Edition Windows 98 Second Edition Windows NT Windows Millennium Edition other versions ex SP2 or former or Server of Windows 2000 are not supported CPU Pentium II 500MHz or faster Pentium IIT 800MHz or faster is recommended RAM 128 MB or more 2
61. low you to view images saved on the PC hard disk directly You must to register the browsing folder as follows 1 Click File Register Viewed Folder or click Register Folders to View The Register Folders to View dialog box is displayed 48 68 2 Select the folder you want to register and then click Register Register Folders to View Select a Folder you want to register and click Register Note Images in both the selected folder and subfolders of the selected Folder will be displayed D Documents and Settings Administrator My Documents My Pictures Y ize Desktop ES E C3 Shared Documents pas a s WINME C big FEA 4 ER a s Local Disk D Ge Local Disk F 20060301 20060501 WS TS 20060601 You cannot register the whole drive The confirmation dialog box for registration is displayed 3 Click Yes Registration of the image information in the data base starts 4 Click Close e The folder you select as the destination of the imported images will be registered automatically e You cannot cancel registration of the folder you register here To change the browsing folder Click Tools Settings Viewed folders Tips e Ifa sub folder is contained in the source folder the images in the sub folder will also be registered e When the software is first started the message prompting you to register My Pict
62. may emitflammable gas nearautomaticdoorsorfirealarmsor other automatically controlled devices Keep this productatleast22 cmaway from cardiacpacemakers Radio waves from this productmay adversely affectthe operation of cardiacpacemakers Donotdisassemble ormodify this product Doing so could resultin injury electricshock orfire 37 GB vu 2 gt a tQ h lt O 3 o A ct gJ Q tQ D A 0 3 D s 00 O s D x lt et D s gt Q D A O Printing from an external device You can connect a mass storage complaint digital camera a USB memory a photo storage device or other external device and print an image directly from the external device Wecannotguaranteeconnection withall typesofmassstorage devices Ifamemory card isinserted in the printer the printer cannotread the signal froman external deviceconnected to the PictBridge EXT INTERFACE connector of the printer Removethememory card ifany Set your digital camera or other external device ready for printing with the Mass Storage compliant printer The settings and operations that are necessary before connection differ depending on the external device you use For details see the operating instructions of the external device In case of Sony Cyber shot digital camera for example select Normal mode or Mass Storage mode for the USB Connect Connect the printer to the AC power source
63. n MMC standard memory card with a capacity of 2 GB or smaller Notes on use e When using a card make sure to check correct insertion direction of the card and correct insertion slot e You cannot read or write the data subject to the copyright protection e Do not strike drop or bend a card e Do not disassemble or modify a card e Do not expose a card to water 74 8 e Avoid using a card in areas subject to high humidity since it may be easily affected by the humidity e Do not use or store a card in a location subject to extremely high temperature such as the hot inside of a car or the outdoors exposed to a direct sunlight or a place near a heater direct sunlight high humidity or corrosive substances static electricity or electrical noises e When you carry or store a card put it in the case supplied with it e Do not remove a card or turn off the printer while the printer is reading or writing data and the access indicator is flashing Otherwise data may be rendered unreadable or erased About the CompactFlash card The CompactFlash card slot of the printer allows you to use the following e CompactFlash Storage Card Type I Type II and CF Card Type I Type II compatible CompactFlash Storage Card e Micro Drive e COMPACT VAULT You can also use the following by using a commercially available CompactFlash card adaptor e Smart Media card e xD Picture Card H
64. nced Specifies the paper size or other options Click Advanced The DPP FP70 FP90 Advanced Options dialog box is displayed Sony DPP FP90 Advanced Options g Sony DPP FP90 Advanced Document Settings Lag Paper Output Paper Size P size DPP FP70 90 v Copy Count ln Graphic P size DPP FP70 90 Image Color Management ICM Method ICM Handled by Host System ICM Intent Pictures iio Document Options Advanced Printing Features Enabled Color Printing Mode True Color 24bpp SA Printer Features Borderless Print ON Auto Fine Print OFF 4uto Touch up OFF Color Setting 46 Items Functions Paper Output e Paper Size From the drop down list box select the paper size you actually use for printing P size post card size L size Note L size print paper is not sold in some regions e Copy Count Specify the number of copies to be printed Graphic Image Color Management e ICM Method The printer does not support the ICM method settings Even when you select an option other than ICM Disabled the printed results do not reflect the setting Leave the option as it is e ICM Intent The printer does not support the ICM Intent settings Leave the option as it is Document Options e Advanced Printing Features Select Enabled to turn on advanced printing options such as Page Order Ifa compatibility problem occurs disable this feature e Color Printing Mo
65. nd the digital camera e Is the USB setting of your gt Set the USB setting of your camera to camera in PictBridge mode the PictBridge mode e Is printing in process gt Connect the cable again after printing is complete You connect and disconnect the USB cable but nothing happens gt The printer has developed an over current error Unplug the AC power cord of the printer plug it in again and then press the on standby switch to recover from the error You cannot stop gt The next print from the one currently printing even if printed will be canceled you pressed gt Depending on the digital camera you CANCEL use you cannot cancel printing from the printer Operate the digital camera to stop printing Refer to the operating instructions of the digital camera You cannot e Is the message Could not gt The printer cannot print Index print of make Index create printing data for the DPOF printing To make Index printing some images displayed printing insert the memory card directly gt Read This First or use a mass storage external device page 38 Bulzooyusajqnos Continued 61 GB Connecting with a computer Symptom Check Cause Solutions The images of the memory card or an external device inserted in the printer are not displayed on the PC You lost the supplied CD ROM and want to obtain a new one The printer driver cannot be installed 62 GB e
66. ng the software cseseeee 39 System requirements n se 39 Installing the printer driver wo 40 Installing the Picture Motion Browser 42 Printing photos from the Picture Motion Browser 0006 44 Printing from a commercially available application software s s s 49 Troubleshooting If trouble OCCUIS cscceseeseeseeeeeseeeeeeees 50 If an error message appeals 00 65 if paper jaM Sosna 68 Cleaning the inside of the printer 68 Additional information PRECAUTIONS nananeraoininin nni 70 Olt Sale ly ET 70 OM MNS tall atIOMN Lannan 70 Slike e lillie eee ee ene ey eee 70 On restrictions on duplication cee 71 On color print DACK Se cededenseceeasteedeseatendensss 71 About the Memory Cards 0ee 72 About the Memory Stick nsss T2 About the SD card nsss 74 About the CompactFlash card cee 74 SPECITICAE ONS narinaa 75 PRUNE TANGE senon 71 Glossary s sistianttseistvie Ris ieiedintinleectiteds 78 Superimpose characters glossary 79 WIEN e E E A E E 82 Before you begin Identifying the parts For details see the pages indicated in the parentheses Illustrations are of DPP FP70 The button locations and names of the DPP FP90 are identical although the LCD screen type is different 6 98 Printer front panel on standby switch indicator gt Read This First 2 MENU button Q zoom out zoom in buttons
67. other external deviceora USBcableisconnected toany ofthe memory card slots the PictBridge EXT INTERFACE connector or USB connecter of your printer removeit from the printer and thenconnectthe Bluetooth adaptor 4 Print from the Bluetooth complaint mobile phone or other device For printing procedures refer to the manual of the Bluetooth device you use To select the printer from a Bluetooth compliant device select Sony DPP FP70 Sony DPP FP90 stands for the two figures from the right of the address displayed in the LCD screen J Bluetooth Address 00 03 7A 33 F4 68 Waiting for connection When input of Pass code is required Input 0000 You cannot change the pass cord with the printer Pass code is often referred to as pass key or PIN code The communication distance of the product may vary depending on the obstacles between the product a human body metal object or wall and mobile phone or other device Sensitivity of the Bluetooth communication may be affected in the following conditions When there is an obstacle between the product and the mobile phone or other product such as a human body metal object or a wall Were a wireless LAN is established or a microwave oven is being used near by or other electromagnetic wave is emitted Since a Bluetooth device and a wireless LAN IEEE802 11b g device use the same frequency ranges
68. our computer and its file PC name includes characters other than alphanumeric characters the file name may not be displayed correctly or the image may not be displayed on the printer read error e Did you specify the print gt Once you have selected images in the quantity in the image list Printing multiple images procedures you cannot print an image with which the cursor is just placed Press ENTER to select it and specify the print quantity for the image Read This First e There are 8 or more gt The printer cannot display the images hierarchies in the memory saved in a folder of the 8th or higher card or an external device hierarchy e Did you change the file gt When you name or rename an image name of the image with file on your computer and its file your PC name includes characters other than alphanumeric characters the file name may not be displayed correctly For a file created with a PC application the first 8 characters of its file name will be displayed as the file name e Is the previewed image gt If an image is extremely stretched extremely stretched vertically or horizontally blank areas vertically or horizontally may appear in the Edit menu gt The standard aspect ratio of an image shot with a digital camera is 3 4 When an image is edited or printed in the P size it is saved as a more horizontal print image and its top and bottom edges will be cut and displayed in black
69. owever we do not guarantee proper operations for all types of CompactFlash cards 4 Use a CompactFlash card with a power specification of 3 3V or 3 3V 5V You cannot use a type for 3V or 5V only Do not insert other types of CompactFlash card into the printer s insertion slot The printer may be damaged 5 When using a commercially available CompactFlash card adaptor refer to the operating instructions of the adaptor you use for how to install the card and adaptor When using the CompactFlash card adaptor the write protected card may not work properly Notes on use e When using a card make sure to check correct insertion direction of the card and correct insertion slot e Do not strike drop or bend a card e Do not disassemble or modify a card e Do not expose a card to water e Avoid using a card in areas subject to high humidity since it may be easily affected by the humidity e Do not use or store a card in a location subject to extremely high temperature such as the hot inside of a car or the outdoors exposed to a direct sunlight or a place near a heater direct sunlight high humidity or corrosive substances static electricity or electrical noises e When you carry or store a card put it in the case supplied with it e Do not remove a card or turn off the printer while the printer is reading or writing data and the access indicator is flashing Otherwise data may be rendered unread
70. ows in addition to the Auto Fine Print4 automatic adjustment e Brightness adjustment using the face recognition Detects the face automatically and adjusts the brightness so that the face becomes of its optimum brightness e Out of focus reduction Detects the out of focus level automatically and corrects the image in focus e Red eye correction Corrects automatically red eye phenomenon caused by flash Printing with the AUTO TOUCH UP adjustments Buttons to be used in AUTO TOUCH UP correction print lt P A V ENTER AUTO TOUCH UP co ZaS 1 Select an image or images Press lt gt repeatedly until the desired image is displayed When you want to print multiple images set the print quantity for each image in advance 2 Press AUTO TOUCH UP Adjustments of the selected image s starts The adjustment results will be displayed on the screen When a human face is detected the face is displayed with frame as adjustments process 10 To check the adjustment result more clearly Press to enlarge the image To display the original image before adjustments again Press AUTO TOUCH UP To display the adjusted image press AUTO TOUCH UP again If you have selected multiple images when pressing AUTO TOUCH UP All the selected images are adjusted To display other images press lt P gt 3 Press PRINT Printing of the selected image s starts Tip Adjustment takes effect only on the image bein
71. page 9 4 LCD screen wee 2 5 type DPP FP70 3 6 type DPP FP90 ENTER button 6 Direction A V lt 1 gt buttons AUTO TOUCH UP button page 10 PRINT button indicator 9 CANCEL button Access indicator 11 CompactFlash card slot gt Read This First page 74 12 Paper tray compartment door gt Read This First Paper tray compartment gt Read This First SD CARD SD miniSD card slot gt Read This First page 74 Memory Stick PRO Standard Duo slot Read This First page 72 Printer right side panel Ink ribbon eject lever gt Read This First Ink ribbon gt Read This First Ink ribbon compartment door gt Read This First Printer rear panel Handle As illustrated below raise the handle when you bring the printer When you use the printer close it to its original position gJ D h O m D lt O an oO D a gt e When you bring the printer make sure to remove memory cards external device and paper tray Otherwise malfunctions may occur e When using the DPP FP90 set the LCD panel to its original position 2 Ventilation holes DC IN 24V jack Read This First Connect the supplied AC power adaptor into this connector Printer left side panel 4 Y USB connector page 41 When using the printer in PC mode connect a PC into this connector PictBridge EXT INTERFACE connector pages 35 to 38 When using a PictBrid
72. position Be careful that the label does not stick out When you write on the memo area of the attached label do not write forcefully When you carry or store the Memory Stick put it in the case designed for the Memory Stick Continued 73 GB UO IJEWIOJU JEUOILIPPY e Do not touch the terminal of the Memory Stick with your hand or a metal object e Do not strike bend or drop the Memory Stick e Do not disassemble or modify the Memory Stick e Do not expose the Memory Stick to water e Do not use or store the Memory Stick under the following conditions Locations beyond the required operational conditions including locations such as the hot interior of a car parked in the sun or and in the summer the outdoors exposed to direct sunlight or a place near a heater Humid locations or locations with corrosive substances present About the SD card The SD card slot of the printer allows you to use the following e SD memory card e miniSD card e SDHC memory card e MMC standard memory card We do not guarantee proper operations for all types of SD memory cards and MMC standard memory cards 1 The printer has been demonstrated as operable with an SD card with a capacity of 2 GB or smaller 2 The printer has been demonstrated as operable with an SDHC card with a capacity of 4 GB or smaller 3 The printer has been demonstrated as operable with a
73. preview of the specified size is displayed If you want to specify the other size repeat steps 3 and 4 Continued 21 GB 6Buluud snouen Buyer 6 Press A V to select J and press ENTER The window for selecting an image is displayed Press lt A V to select the desired image and then press ENTER The window used for adjusting the image position is displayed Adjust the size and position of the selected image Press lt P to select the desired adjustment item then press ENTER Adjustment tools Wo aa CN TER Mua Items Procedures Q Increases or reduces the size of an image by pressing the buttons on the printer W Move the image with lt P A V and then press ENTER E Each time you press ENTER the image rotates 90 clockwise 1tT Press A V to select the desired adjustment item and press ENTER Adjustment slider is displayed Press lt gt to move the slider to the desired position to adjust the brightness tint saturation or sharpness level 22 GB Items Procedures Changes the image into a monochrome picture Corrects the red eye phenomenon Page 16 AUTO TOUCH UP Automatically adjusts a failed photo having problems such as backlit out of focus or red eye phenomenon by pressing the button on the printer 9 Press lt gt to select OK and press ENTER The preview of the ID photo print is displayed Tip To save and print the ID photo previ
74. r If there is print paper in the tray remove it 4 Place the cleaning sheet into the paper tray with the no imprint side facing up surface without imprints 5 set the paper tray into the printer and press PRINT The cleaning cartridge and cleaning sheet will clean inside the printer After the cleaning is finished the cleaning sheet is automatically ejected 6 Remove the cleaning cartridge and sheet from the printer Tip Keep the cleaning cartridge and cleaning sheet together for future cleaning TS O C o D N F O O ay Vo When cleaning ends Set the ink ribbon and print paper into the printer e Carry out cleaning when there are white lines or dots on the print e When you can obtain proper printing performances cleaning will not improve the printed picture quality e Do not place the cleaning sheet on the print paper and carry out cleaning which may cause paper jam or other troubles If a cleaning does not improve printed picture quality please carry out cleaning a couple of times e You cannot clean the printer while it is connected to a PC or a PictBridge camera 69 GB Additional information Precautions On safety Be careful not to set or drop any heavy objects on the power cord or to damage the power cord in any way Never operate this printer with a damaged power cord Should any solid object or liquid fall into the cabinet unplug the printer and have it che
75. remove jammed paper from the printer If the jammed paper cannot be removed contact the Sony service facilities 67 GB Duizooys jqnoIL If paper jams If the print paper jams an error message is displayed and you cannot make printing Please do not remove the paper tray and ink ribbon from the printer and remove the jammed paper In case you removed the paper tray do not re insert the paper tray until the jammed paper is ejected T Turn off the power of the printer and then turn it on Please wait for the print paper to be ejected automatically Jammed paper 2 Remove the ejected print paper from the printer 3 Remove the paper tray and ink ribbon from the printer and check to see if there is no jammed print paper inside Check to see if there is jammed paper If any remove it If you cannot remove the jammed paper contact your Sony dealer 68 GB Cleaning the inside of the printer If white lines or periodical dots are printed on the pictures use the cleaning cartridge and cleaning sheet supplied to clean inside the printer Before start cleaning the printer please remove a memory card external device or USB cable from the printer 1 Open the ink ribbon compartment door and if there is an ink ribbon for printing remove it 2 insert the supplied cleaning cartridge into the printer and close the ink ribbon compartment door 3 Remove the paper tray from the printe
76. rioration of the printed image may occur 72 GB About the Memory Cards About the Memory Stick What is Memory Stick Memory Stick is a compact size IC recording medium with a large capacity It has been designed not only for exchanging sharing digital data among Memory Stick complaint products but also for serving as an insertable removable external storage medium that can save data Types of Memory Stick that the printer can use With the printer you can use the following types of Memory Stick Delet ing Sav ing For matting Memory Stick type Memory Stick Not compatible with MagicGate Memory Stick MagicGate Compatible MagicGate sil OK OK Memory Stick CaCa Memory Stick PRO Memory Stick Micro M2 1 Data reading recording that requires MagicGate copyright protection cannot be performed MagicGate is the general name of a copyright protection technology developed by Sony using authentication and encryption 2 The printer is equipped with a slot compatible with both standard size and Duo size media Without a Memory Stick Duo adaptor you can use both standard size Memory Stick and compact size Memory Stick Duo 3 The printer supports FAT32 The printer has been demonstrated as operable with a Memory Stick with a capacity of 8GB or smaller manufactured by Sony Corporation However we do not guarantee t
77. rizontal sizes for an image Superimpose A print with superimposed message handwrite characters or illustrations Displaying the Creative Print menu Buttons to be used in Creative Print lt V E A V ENTER PRINT CANCEL MENU T Press MENU The menu bar is displayed 18 S Menu bar Creative Print menu icon To exit the menu mode Press MENU again The previous window is displayed 2 Press lt gt to select D Creative Print and then press ENTER The Creative Print menu is displayed D CreativePrint Layout print ID Photo Superimpose ara to select lway to fix To undo the operation midway Press CANCEL The window of the previous step is displayed Depending on the step you cannot undo the operation Tip You can press MENU while making a Creative Print and set part of the Print setup menu items To exit the Creative Print menu e Press MENU in the middle of the operations and select Creative Print Complete e Display the preview image and then press P A V to select 9 and press ENTER The dialog box for saving an image may be displayed page 17 Making layout prints You can make a print with 2 split 4 split 9 split 13 split or 16 split images 1 Display the Creative Print menu page 18 2 Press lt gt A V to select Layout Print then press ENTER The Layout Print templates are displayed f Layout print POPE FREE Select form with
78. rless Factory settings Continued 31 GB lt D a 5 Co lt S zi O C N re 2 3 3 Co Item Date Print Color Setting 32 GB Settings On Off Contents Prints the date of shooting with an image when the image is a file recorded in the DCF Design rule for Camera File system format To make a print with the date of shooting shoot an image in the DCF file format When the image is saved with the printer the date of saving is printed Prints an image without the date Adjusts the colors and sharpness of a print Press gt to select a color element R red G green or B blue or S Sharpness and then press A V to set the level You can set the levels for R G B in the range from 4 to 4 and for S in the range from 7 to 0 R Adjusts the red and blue elements The higher you set the level the more reddish the picture becomes as if it receives red light The lower you set the level the darker the picture becomes as if light blue is added G Adjusts the green and purple elements The higher you set the level the more greenish the picture becomes as if it receives green light The lower you set the level the darker the picture becomes as if red purple is added B Adjusts the blue and yellow elements The higher you set the level the more bluish the picture becomes as if it receives blue light The lower you set the level the darker the picture
79. rom the rear a few times during printing make sure to spare enough space behind the printer during printing 10 cm or more Continued 53 GB Bbuljzooyusayjqnoi Printed results Symptom Cause Solutions The printed e Did you print preview gt Depending on the type of digital pictures are image data camera used preview images may be inferior in displayed along with the primary quality images in the thumbnail list The printed quality of the preview images will not be as good as the primary images Note that if you delete the preview images the data for the primary images may be damaged e Did you print animage When the image is displayed as shown whose size width or on the left itis a small image The height is smaller than printing quality is rough due to this 480 dots small image size Is the image displayed as gt Change the image size setting of the follows digital camera you are using e Did you use the Edit gt An enlarged image depending on its menu to enlarge the image size will be printed with image deteriorated picture quality e Did you allow dust or gt Do not touch the printing surface the finger prints to get on the shiny side with no imprint printed surface Fingerprints on the printing surface may result in imperfect printing e Did you use used print Do not print on used print paper Or paper or ink ribbon do not use the used ink ribbon to print an image Printing an image
80. rts automatically To USB connector connector Windows PC Use a B type USB cable shorter than 3m in length 9 Wait for a while then check to see that Sony DPP FP70 or Sony DPP FP90 is added to the Printers and Faxes gt Printers and Faxes File Edit Yiew Favorites Tools Help 4 Vig Search Folders X wy I L Printers and Paxos Printer Tasks See Also Other Places Details 10 When the installation is complete remove the CD ROM from your PC and keep it for future use To continue to install the Picture Motion Browser software follow the procedures from step 2 on page 42 e If the installation fails remove the printer from your PC restart your PC and then do the installation procedures from the step 2 e After installation the Sony DPP FP70 or Sony DPP FP90 is not set as the default printer Set the printer you use for each application e The supplied CD ROM will be required when you uninstall or re install the printer driver Keep it in good order for possible future use vu gt ap m tQ h lt O 3 vu O e Before you use the printer read the Readme file the Readme folder of the CD ROM gt English folder gt Readme txt When the software is installed The kl is displayed on the Windows desktop as well as a shortcut to the web site for printer customer registration If you finish registration you can find support information
81. rvice facilities or your Sony dealer gt Paper is jammed See If paper jams page 68 and remove jammed paper from the printer If jammed paper cannot be removed contact the Sony service facilities gt The data size of an image is large and it takes longer to process it for printing As soon as the data processing finishes the printer starts printing gt Paper is jammed See If paper jams page 68 and remove jammed paper from the printer If jammed paper cannot be removed contact the Sony service facilities gt If no indicator is lit the thermal head may be overheated Leave the printer until the head cools down and the printer resumes printing Connecting with a digital camera Symptom Cause Solutions The PictBridge Is the digital camera gt Connect the cable correctly mark does not connected correctly appear on the LCD screen of the digital e Is the on standby gt Turn on the on standby switch switch turned on CARERE e Does the firmware of your gt See the manual supplied with your digital camera support the camera or consult with the printer manufacturer e Is Connecting gt The message is not displayed while the displayed printer is in the Edit Creative Print or other menu modes Exit the menu and then connect the cable again gt Disconnect the digital camera and the printer and then connect them again Or turn off and then on the printer a
82. ry card maybe damaged Orthe imagemay belost e Youcannotformatamemory card other than the MemoryStick oranexternal device 29 GB lt D a 5 Co lt S zi O C N re 2 3 3 Co Changing the print settings Print setup The Print setup menu allows you to change various print settings listed on pages 31 and 32 Buttons to be used in this section lt V P A V ENTER CANCEL MENU Press MENU The menu bar is displayed Menu bar Print setup menu icon Print setup y To exit the menu mode Press MENU again The previous window is displayed 2 Press lt gt to select E Print setup and then press ENTER The Print setup menu is displayed Print setup menu Print setup Borderless Date Print On Color Setting 0 0 0 0 Borders SFA ENTER METI a ENU aa 30 GB During the Creative Print operations you cannotselect theitemsexcept for Color Setting Gettingitems whichcannotbe selected and changed are displayed in gray 3 Press A V to select the desired setting item and press ENTER The setting window for the selected item is displayed next page 4 Press A V to select the desired setting and press ENTER The setting is fixed Tip Toexitthe Printsetup menu press MENU Item Auto Fine Print4 Borders Settings Photo Vivid Off Pattern 2 Borderless Contents The function automatically corrects the pi
83. s displayed cause if any and try to solve the problem remedies on the LCD page 65 screen e Is the memory card or an gt Insert a memory card or an external external device properly device properly Read This First inserted e Does the memory card or gt Insert a memory card or an external an external device contain device that contains the recorded images recorded with a images digital camera or other gt Check the file formats that can be device printed with the printer page 75 gt If an image is not compatible with the DCF it may not be printed with the printer even if it is displayed on the PC monitor e Is the file format compatible with the DCF 50 GB Some images in the image list are not displayed or not printed even if they are displayed e Are thumbnail images displayed in the image list e Does the mark displayed below appear in the image list e Was the image created on your PC e Does the mark displayed below appear in the image list D e Are there more than 9 999 images saved in the memory card or an external device Cause Solutions gt If the image is displayed but cannot be printed the file used for printing is damaged gt If there are no images stored in the memory card or an external device the No image file message appears gt If an image is not compatible with DCF Design rule for Camera File system it may not be printed
84. s V for more than two seconds Scroll bar Indicates the position of the image among the total number of images 9 Detailed image data display Detailed image data 4 display T A Image list Switching the screen DPP FP70 display between an image preview and image list You can switch an image preview and the image list as follows e To display the image list In an image preview press Q zoom out When an image is enlarged press Q repeatedly An image is reduced up to the original scale and then the image list is displayed e To display an image preview In the image list press 4 gt A V to move the cursor to the desired image and press ENTER or Q zoom in The display changes from the image list to an image preview e To enlarge an image preview In an image preview press Q LF SPENTER to select image DPP FP90 zoom in repeatedly The image is enlarged to 6 steps up to the 5 times the original scale x1 x1 5 x2 x3 x4 and x5 LF SPENTER to select image 1 Cursor orange frame You can move the cursor by pressing A V lt gt 2 Operation tips Scroll bar Indicates the position of the image among the total number of images OQ GB ulBbag no asojag a Making various printing Correcting a failed photo automatically AUTO TOUCH UP What is AUTO TOUCH UP feature The AUTO TOUCH UP feature allows you to adjust an image automatically as foll
85. sed in the main window as follows To switch the view click the tab Folders or Calendar e Folders view The images will be classified in each registered folder and are displayed as thumbnails e Calendar view The images will be classified according to the shot date and are displayed as thumbnails on each date of the calendar In Calendar view you can switch the display according to the year month or hour In this section Folders view windows are used as examples 3 Click the folder containing the photos you want to print As an example the sample folder is selected in the following explanation Select the photos that you want to print and click print The Print dialog box is displayed In the Printer drop down list box select Sony DPP FP70 or Sony DPP FP90 To set the paper orientation or other print options go to step 6 To print skip to step 11 1 1 1 13 2004 3 18 00 PM Printer settings Printer Sony DPP FP90 Paper size P size DPP FP70 90 Print options v Zoom the image until the print area is full Part of the image may be cut Print date taken Items Functions Printer Settings e Printer Select the printer you are using Sony DPP FP70 or Sony DPP FP90 e Paper size To change the size click Properties Note In some regions L size print paper is not sold Print Options
86. select Memory Stick SD Card CompactFlash or External Device and press ENTER Select copy destination CompactFlash PY oE AFA ENTER ot atA Tip When you select External Device a dialogboxforselectinga drivemaybe displayed Follow theinstructionsonthe screen toselect the destination drive 28 GB Youcannotcopy animageontothe identicalmemory card orexternal device as thosecontaining theimagetobecopied The dialog box for selecting a folder is displayed 7 Press A V to select the desired folder and press ENTER The selected images are copied onto the destination folder Tip Toexitthe File operationmenumidway press CANCEL Whilecopying images donotturnoffthe printer orremoveamemory card oranexternal devicefrom the printer The printer memory card or USBexternal devicemay be damaged or the datamay belost Deleting selected images You can select and delete images on a memory card Press MENU The menu bar is displayed 2 Press lt gt to select Hm File operation and then press ENTER The File operation menu is displayed 3 Press A V to select Delete Image and press ENTER The image list is displayed Trash icon B ENTER BS Creat tei ME NURS G Press lt gt A V to move the trash icon to the image you want to delete then press ENTER To delete multiple images repeat this step To cancel the selection Press gt A V to select the
87. seseeeeeees 12 Displaying the Edit menu ccceeeeee 12 Enlarging and reducing an image size 13 MOVING an Image sorreran in 13 Rotating an iMage rreran 14 Adjusting an iMage sssi 14 Adding a special filter to an image 15 Correcting the red eye phenomenon 16 Printing an edited image sseeeeeeeee I Saving an edited Image s 17 Making a Creative Print ceceeee 18 Displaying the Creative Print menu 18 MAKING layout prints sevisiunecvaniionenviniviovianis 19 Making a calendar sszh ccocszorsensarevensarentvens 20 Making an ID photo sssssssseseseseserereereeeen 21 Superimposing a message on an image 23 Viewing a slideshow nsss 25 Searching for an IMAGE sceceeeceeees 26 Filing WM AGES seveedevenssausvesecadtienseaiiantas 27 Copying Images sas cxrrtepsrd icestuad asaauearusaaes 2 7 Deleting selected images cseereeeeee 28 Formatting a Memory Stick vo 29 Changing the print settings Print setup necne a 30 Changing the display and printer preferences Display Printer setup 33 Printing from a PictBridge camera or external device Printing from the PictBridge digital CAMELA sesersseeeeeeeeee 35 Printing from a Bluetooth compliant DEVICE epiniai nn a 36 Compatible profiles for Bluetooth COMMMUMICABION aaia 36 Printing procedures si swat cient weanwctmenniats 36 Printing from an external device 38 Printing from a PC Installi
88. size of rotating or moving an image Perform these editorial operations first and then perform red eye correction symptom Cause Solutions The e Are you operating the Borderless Creative Print menu and Pattern 2 setting does not take effect D8 GB gt In the Creative Print menu templates are used and you cannot select border borderless prints Saving or deleting an image Symptom Cause Solutions You cannot save e Is the memory card oran_ gt Use your digital camera or external an image external device protected device to release the protection and then try saving again e Is the write protect switch gt Slide the write protect switch to the of the memory card in the write enable position page 73 LOCK position e Is the memory card full Delete unnecessary images page 28 or replace it with a new memory card with sufficient free memory space Save the image again Vou cannot e Is the memory card or an gt Use your digital camera or external delete an image external device protected device to release the protection and try printing again e Is the image DPOF preset gt Release the DPOF preset with your digital camera e Is the write protect switch Slide the write protect switch to the of the memory card inthe write enable position page 73 LOCK position e Are you using a e gt You cannot delete an image from or e format a Memory Stick ROM
89. ss setting gt page 31 gt You can print the whole area of an image by selecting Pattern1 in the Print setup menu page 31 gt Depending on the type of digital camera used the image may be stretched vertically if it has been rotated or processed using your digital camera This is not because of trouble with the printer but because the image was rewritten with your digital camera gt Re insert the paper tray firmly straight in to the end gt The print head or paper path may be soiled Use the supplied cleaning cartridge and sheet to clean the head and path Continued 57 GB Duizooys jqnoIL The picture is too bright dark reddish yellowish or greenish The eyes of the subject are red correction does not take effect with AUTO TOUCH UP button correction does not take effect with Red eye e Did you enlarge reduce correction the size of rotate or menu move an image after the red eye correction Settings gt Adjust an image by selecting Menu Edit Adjust page 14 gt Press AUTO TOUCH UP button to adjust the red eye phenomenon page 10 gt Adjust for the red eye phenomenon by selecting Menu Edit Red eye correction gt page 16 gt Set the size of the adjustment frame to be two to seven times as large as the eye page 16 gt Red eye correction may not work properly if other editorial operations such as enlarging reducing the
90. subjecttoits penalty e Insomeregions the Sony DPPA BT1 Bluetooth USB adaptorisnotsold Compatible profiles for Bluetooth communication The DPPA BT1 adaptor supports the following profiles e BIP Basic Imaging Profile e OPP Object Push Profile For the profiles that your Bluetooth device supports please refer to its manual What is Profile Standards that enable the Bluetooth wireless communication There are several profiles depending on the purposes and product profiles to be used To make the Bluetooth communication possible the devices to be communicated should support the same profile Compatible image file formats to be printed JPEG DCF 2 0 compatible Exif 2 21 compatible JFIF 4 4 4 4 2 2 4 2 0 formats Baseline JPEG TIFF Exif 2 21 compatible 36 GB BMP 1 4 8 16 24 32 bit Windows format Some image file formats are not compatible Maximum number of pixels to be handled 8 000 H x 6 000 V dots Maximum 5 MB or less Printing procedures When printing from a PictBridge EXT INTERFACE connector make sure to remove memory card s from the printer in advance T connect the printer to the AC power source 2 Press the on standby switch to turn on the printer 3 Insert the Bluetooth adaptor to the PictBridge EXT INTERFACE connector of your printer PictBridge EXT INTERFACE Incaseany device otherthan the Bluetooth adaptor suchasamemory card camera PC or
91. tal number of print paper does not exceed 20 sheets Do not print on the used print paper Printing an image twice on the same paper will not make the printed image thicker Use the print paper for this printer only Do not use the print paper ejected without printed e Do not print on used sheets of print paper or attempt to rewind the ribbon inside the ink ribbon Doing so could result in damages to the printer e Do not remove the paper tray while printing Continued 71 GB UO EWIOJU EUOIIPPY Notes on storing print packs e When you are going to store a partially used pack of the ink ribbon and print paper for an extended period of time store it in its original bag or in a similar container e When you are going to store print paper in the paper tray make sure to close the tray cover and slide cover e Avoid placing the ink ribbon in locations subject to high temperature high humidity excessive dust or direct sunlight Please store it in a dark and cold location and use it early Depending on the storage status color elements of the ink ribbon may deteriorate Sony shall assume no responsibilities for any damage loss or failed printed results that may be caused by use of such ink ribbon e Avoid leaving the printing surface of the print paper in contact with a plastic eraser or plastic desk mats that includes vinyl chloride or plasticizer for an extended period of time color changes or dete
92. te Print in the Print setup menu to Off page 32 gt Change the camera settings Symptom Cause Solutions The image cannot be printed fully in the print range Borders remains e Did you select Pattern1 or Pattern2 for Borders in the Print setup menu e Is the aspect ratio of the image correct Even if Borders is set to Borderless the image is printed with borders on both sides e Is the image edited and saved with Pattern1 or Pattern2 settings e Did you set Pattern1 in the Print setup menu The whole area of an image cannot be printed The image is stretched horizontally when printed e Did you rotate the image or add other process e Is the paper tray inserted properly The image is printed at an angle There are white lines or dots on the printed pictures gt Set Borderless by selecting Menu Print setup Borders page 31 gt Depending on the type of digital camera used the aspect ratio of the recorded image differs so the image may not be printed covering the entire printable area gt When you edit and save an image with Pattern1 or Pattern2 settings it is saved as a print image including the blank areas Even if you print it with Borderless setting you cannot eliminate the borders on both sides of a print To print without borders edit and save an image with Borderle
93. ter Information Display of the Display Printer setup menu page 34 13 2 ger Print Settings Borderless No time stamp AutoFine Print 4 ON Photo When printing a photo 4 22 MB file size taken by a Sony digital still camera containing effective picture elements of approximately 10 100 000 or equivalent Print Speed Time from when the PRINT button is pressed to when printing is finished The printing time may vary depending on a used equipment a format of an image a used memory card settings of an application and operating conditions Printing range P size 152 4 mm 6 inch 1 800 dots 95 5 mm 3 inch 1 128 dots 146 3 mm 5 7 inch 1 728 dots 4 5 6 wT 8 When printing from a Memory Stick PRO Duo inserted in the printer s slot When printing via DSC N2 connected by USB cable Time from when the PRINT button on the OSD of the camera is pressed to when the printing is finished The time for data processing and transferring is excluded Baseline JPEG with 4 4 4 4 2 2 or 4 2 0 format You cannot print using the Picture Motion Browser Customer support home page The latest support information is available at the following home page address http www sony net 101 6 mm 4 inch 1 200 dots Border print range a a Borderless print range Perforations The above illustrations are those when an image with a 2 3
94. the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help For the Customer in Europe This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters 9 8 feet Attention The electromagnetic fields at the specific frequencies may influence the picture of this digital photo printer Notice If static electricity or electromagnetism causes data transfer to discontinue midway fail restart the application or disconnect and connect the communication cable USB etc again Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment
95. the print quantity and then press PRINT to startprinting Filing images Buttons to be used in this section lt V P A V ENTER CANCEL MENU Copying images You can copy images between memory cards inserted in the memory card slot or an external device connected to the PictBridge EXT INTERFACE connector T Press MENU The menu bar is displayed Menu bar File operation menu icon ile operation To exit the menu mode Press MENU again The previous window is displayed 2 Press lt gt to select File operation and then press ENTER The File operation menu is displayed File operation menu ____ File operation Copy selected files Delete Image Memory Stick Format 7 yy eS Continued 27 GB Buljuud snouen Buie N 3 Press A V to select Copy all files or Copy selected files and press ENTER e When Copy all files is selected the dialog box to select the destination to copy the image s is displayed Skip to step 6 e When Copy selected files is selected the image list of the memory card or external device is displayed 4 Press lt gt A V to select the desired image and press ENTER To copy multiple images repeat this step To cancel the selection Press gt A V to select the image whose selection you want to cancel and press ENTER again 5 Press MENU The dialog box to select the destination is displayed 6 Press A V to
96. tination location is displayed 7 Check the destination and then click Next The Ready to Install the Program dialog box is displayed 8 Click Install and follow the instructions on the screen to proceed with installation When you are prompted to restart your PC follow the displayed instructions to restart it 9 When the installation is complete remove the CD ROM from your PC and keep it for future use e If the installation fails perform the installation procedures from step 2 again e The supplied CD ROM will be required when you uninstall or re install the Picture Motion Browser Keep it in a safe place for possible future use Uninstalling the Picture Motion Browser When this software is no longer needed remove it from your PC as follows 1 Click Start Control Panel 2 Open Add or Remove Programs 3 Select Sony Picture Utility and click Change Remove The software uninstallation starts 4 Click Finish Continued 43 68 vu 2 gt a tQ h s O 3 00 vu O Printing photos from the Picture Motion Browser You can use the Picture Motion Browser to print an image from your PC using P size print paper 1 Start the Picture Motion Browser window using either of the following methods e Double click i Picture Motion Browser on the Windows desktop Click Start All Programs or Programs with Windows 2
97. twice on the same paper will not make the printed image thicker 54 8 The printed pictures are inferior in quality e Did you shoot an image in gt When you shoot an image in the RAW the RAW file format e Did you use an AdobeRGB compliant digital camera not compatible with the DCF 2 0 to shoot an image in the AdobeRGB mode file format a highly compressed JPEG file may be also recorded As the printer does not support the RAW file format it may use the JPEG file to print an image A RAW file can be printed from a PC For details see the operating instructions of the digital camera you are using What is a RAW file A RAW file is an original image file format to save uncompressed unprocessed still image data captured from a digital camera For whether or not a digital camera can capture an image in the RAW file format see the operating instructions of the digital camera gt An AdobeRGB image file that supports the DCF 2 0 will undergo color corrections but an AdobeRGB image file that does not support the DCF 2 0 will be printed in vague colors without color corrections What is an AdobeRGB An AdobeRGB is a color space that the Adobe Systems Incorporated employs and uses as the default setting for image processing software including the Adobe Photoshop The AdobeRGB an optional color space extended with the DCF 2 0 determines the color ranges widely used in printing industry For wheth
98. ures will be displayed e Depending on the number of images it may take some tens of minutes to register images Printing from a commercially available application software You can use a commercially available application software to print an image from the DPP FP70 FP90 Select DPP FP70 or DPP FP90 as Printer in the print dialog box and select the print paper size in the page setup dialog box For details in print settings see steps 6 and 7 on pages 45 and 46 On Borderless Print setting in the Printer Features When using an application other than the Picture Motion Browser an image might be printed with borders even if you select ON for the Borderless Print in the Printer Features of the Sony DPP FP70 FP90 Advanced Options dialog box When you select the borderless print option the printing range information for borderless print will be supplied to the application Some applications however may arrange and print the image with borders within the specified range If this occurs do the following to print an image without borders e When you can set print range with an application set an image to be printed fully in the print range For example select Full page photo print or a similar option Orientation setting Depending on the application software you use orientation may not change even if you change portrait or landscape setting With border
99. vel you set the more light sources become sparkling Select Length with A V and press ENTER adjust length of light with A V then press ENTER Press A V to select INA Then press ENTER Tip To print the image previewed press PRINT page 17 15 C8 6Buluud snouen Buyer Correcting the red eye phenomenon When pressing AUTO TOUCH UP cannot reduce the red eye phenomenon of a subject shot by flash you can adjust it manually If you perform additional editing such as enlarging reducing the image size rotating or moving an image after the red eye correction the red eye correction may not take effect Perform the red eye correction after these editorial operations 1 Display the Edit menu page 12 2 Press lt gt to select Red eye correction and then press ENTER The adjustment frame appears on the image which indicates the range for red eye correction Adjustment frame Sad ENTER Wao 3 Adjust the position and size of the adjustment frame Make the red eye correction for the right and left eyes separately To move the adjustment frame Press lt P to select W Move and press ENTER Move the frame with lt P gt A V The frame moves in the selected direction 3 Press ENTER 16 3 The frame is fixed in the current position To change the size of the adjustment frame Press lt 1 P to select Q Enlarge or Q Reduce and press ENTER Each time you press
100. wave interferences may occur when the product is used near a device equipped with a wireless LAN This may cause deterioration in the communication speed and connection conditions If this occurs take the following measures Keep a distance of at the nearest 10 m from a wireless LAN device when you connect the product to the mobile phone Turn off the wireless LAN device in case you should use the product within 10 m from the wireless LAN device It is not guaranteed that this product works with all devices enabled with Bluetooth wireless technology Do not use the DPPA BT1 outsides the area you purchased it Depending on the areas the use of this product may infringe the wave regulations and may be subject to its penalty Sony cannot assume any responsibilities for any information leakage that may be caused in Bluetooth communications Sony cannot accept responsibilities for any failure to satisfy the protection requirements resulting from a non recommended modification or use of the product For customer support information please refer to the operating instructions of your printer H Cautions Radiowavesfroma Bluetoothdevicemay adversely affectthe operations ofelectrical and medical devices and could lead to accidents duetomalfunctions Makesure to turn offthe productand mobile phoneand do notuse this productin the following places Insidethemedical facilities trains airplanes gasstationsor other places that
101. will not be overwritten 1 Select the destination to save an image Press A V to select Memory Stick SD Card CompactFlash or External Device and press ENTER Select the destination folder SD Card CompactFlash YY aE AFA ENTER comes e Tip When you select External Device a dialog box for selecting a drive may be displayed Follow the instructions on the screen to select the destination drive The dialog box for setting date is displayed You can save the set date with the image 2 Set date Press A V to select the number and press lt 1 P to select the day month or year Then press ENTER Set the date Z 04 01 Y ae hadaii ENTER Bdot aha The edited image by the Edit or Creative Print menu is saved as a new image The dialog box to notify the new image number folder number file number is displayed 3 Press ENTER While saving the image do not turn off the printer or remove a memory card or an external device from the printer The printer memory card USB card or external device may be damaged or the data may be lost 17 GB 6uund snouen Buie N Making a Creative Print With images saved in a memory card or an external device you can make the following prints Menu You can make Layout Print A print with 2 4 9 13 16 split images Calendar Calendars with your favorite images ID Photo An ID photo by specifying vertical and ho
102. with the printer even if it is displayed on the PC monitor gt If the mark shown on the left is displayed the image may be a JPEG file created with your computer or the thumbnail data is not contained Select the mark and press ENTER to display its image preview If an image is displayed you can print the image If the same mark is displayed again the image is of incompatible file format and you cannot print it with the printer gt If the mark shown on the left is displayed the image is of compatible file format but its thumbnail data or the data itself cannot be opened Select the mark and press ENTER to display its image preview If an image is displayed you can print the image If the same mark is displayed again you cannot print it with the printer Bbuljzooyusayjqnoi gt The printer can display save delete or handle up to 9 999 image files If there are more than 9 999 images stored in a memory card or an external device use the PC or PictBridge mode to display and handle the remaining images Continued 51 GB symptom Check __ _ _ _ _ Cause Solutions Some images in the image list are not displayed or not printed even if they are displayed The file name is not displayed correctly In the Edit menu there are blank areas at the top and bottom of the previewed image 52 GB e Did you name or rename gt When you name or rename an image an image file with your file on y
103. y special attention not to infringe the provisions of the copyright law Any unauthorized use or modification of others portrait may also infringe their rights For some demonstrations performances or exhibits photography may be forbidden Backup recommendations To avoid potential risk of data loss caused by accidental operation or malfunction of the printer we recommend that you save a backup copy of your data Information IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT Sony shall assume no responsibility for any accidental or consequential damages or loss of the recording contents which may be caused by use or malfunction of the printer or memory card Notes on LCD screen e The displayed image on the screen is not identical in picture quality and colors with the printed image because phosphor methods or profiles differ Please regard the displayed image as just a reference e Do not press against the LCD screen The screen may be discolored and that may cause a malfunction e Exposing the LCD screen to direct sunlight for long periods may cause malfunctions e The LCD screen is manufactured using extremely high precision technology so over 99 99 of the pixels are operational for effective use However there may be some tiny black points and or bright points

Operating Instructions

Contents

Download Pdf Manuals

Related Search

Related Contents