FAZ3000-FB-2 Wireless remote control
Contents
1. button thrice The alarm base station goes back to the normal display mode main menu IS Please note If you have entered the same security code for multiple remote controls the alarm base station can store a maximum of four different security codes that is 4 remote controls each with a different security code none of the remote controls with the same code will function any longer for instance 10 remote controls with the code 124124124 after deleting one remote control having this code one of the remote controls must be registered with a new code the other 9 must be programmed to the same new codel 15 10 Information on the range Ranges and interference The components of the FAZ3000 wireless alarm system work in the 868MHz range which is also used by other radio services Therefore devices that operate on the same or neighbouring frequencies may restrict both its operation and its range The specified range is the free field range which means the range with visual contact between the transmitter and receiver In practice however ceilings walls garages or neighbouring buildings between the transmitter and the receiver may affect and reduce the range accordingly In case of the alarm base station version with an external antenna FAZ HF a range of more than 100m is possible older versions of the alarm base station with an internal antenna have a range of up to 100m The actual attainab2. If stolen there is a risk of the alarm base station being disarmed If a remote control is stolen or if you lose it delete it immediately from the alarm base station see section 9 on page 14 e Never dismantle the product Have the device repaired by a skilled technician only otherwise the device s licence and even its guarantee will become invalid Even a fall from a low height can damage the product The remote control can be attached to a key ring using the opening Please note If the buttons are pressed accidentally near the alarm bas station for instance when the remote control is kept in one s pockets the alarm base station may be inadvertently activated or deactivated 17 12 Maintenance and cleaning The remote control does not require servicing except for replacing the batteries when needed e Never dismantle the product Have the device repaired by a skilled technician only otherwise the device s licence and its guarantee will become invalid e Clean the remote control with a soft clean dry and lint free cloth To remove heavier dirt use a cloth which is slightly moistened with lukewarm water Do not use any cleaning agent as it may damage the surface of the plastic casing and its inscription Please note The alarm base station may be activated inadvertently when the buttons are pressed Therefore set the alarm base station in the maintenance mode before cleaning the remote
3. It also has a panic function that can trigger an alarm using the FAZ Z alarm base station Any use other than the one described above may damage the FAZ3000 FB 2 wireless remote control No part of the product may be modified or adapted Take note of all the safety instructions in this user manual 2 Scope of delivery e Wireless remote control e User manual 3 Explanation oficons An exclamation mark in a triangle in this user manual points to important instructions that must be observed without fail The hand symbol indicates special tips and information on operation 7 4 Safety instructions The product s guarantee becomes invalid if the product is damaged as a result of the failure to observe these operating instructions We do not assume any liability for any resulting damages We do not assume liability for damage to property or personal injury caused by improper use or failure to observe the safety instructions In such cases the product s guarantee becomes invalid Dear customer the following safety instructions are intended to protect you as well as the device Please take time to read through the following points a General information For safety and licensing CE reasons any unauthorised alterations to and or modification of the product are not permitted e This product is not a toy and should be kept out of the reach of children The remote control must not get damp or
4. enter a space character gt Special characters can be entered using the 4 and buttons gt You can use the Meni a A button to switch between lower and upper case gt Thecursor automatically jumps to the next position approx one second after the last button was pressed gt You can use the C button to delete a character you entered by mistake Once you have entered the name you require press the OK button rem con 2 clear e If you wish to register another remote control proceed as described above e You can exit the registration mode of the alarm disarm base station by pressing the C button thrice 16 54 14 12 The alarm base station then goes back to the normal display mode main menu 13 9 Deleting a remote control from the FAZ Z alarm base station If a remote control is lost or stolen it must be deleted immediately from the FAZ Z alarm base station IS Burglary protection cannot be then guaranteed since a finder or a thief can disarm the alarm base station Proceed as follows to delete a remote control You must be on the top level The LCD should appear as on the right for example with the time and the date Press the Meni a A Menu a A button on the control panel of the FAZ Z the alarm base station troubles is displayed Use the 4 and buttons to select the sen
5. if the remote control is lost 2 Open the cover of the battery compartment at the rear side of the remote control for instance using a coin Rotate the cover clockwise in the arrow direction open slightly until it can be removed 3 Insert one CR2016 type battery observing the correct polarity the plus pole of the battery has to point outwards towards you 4 Replace the cover properly and close it by slightly rotating it anticlockwise in the arrow direction close 5 If a security code has been already programmed if you have simply replaced the battery the remote control is ready for operation Proceed 10 as described below Re entering or changing the security code if you wish to enter a new security code 6 At the time of the initial operation the LED on the front side blinks for approximately 20 seconds this indicates that it is ready to accept the security code input IS The LED goes outif you do not enter the security code within these 20 seconds Pressing any button activates the entry mode again for 20 seconds 7 Enter the 9 digit security code using the three buttons of the remote control only at the time of the initial operation ext button 0 Numerical value 1 int button Numerical value 2 unscharf disarm button Numerical value 4 Example 142142142 8 The LED goes out after entering the security code the remote control is
6. ready for operation The remote control can be now registered to the alarm base station see section 8 on page 12 Re entering or changing the security code for instance in case of a wrong input or to change the security code 1 Keep the ext button pressed 2 After about 5 6 seconds the LED lights up for approximately five seconds and then goes out Release the button only after that 3 The LED starts to blink 4 Proceed from step 7 above to enter the security code IS Please note Ifthe remote control has been already registered to the alarm base station using a particular security code you must delete this security code from the alarm base station before changing it The remote control can be registered again to the alarm bas station after entering a new security code 11 8 Registering the remote control to the FAZ Z alarm base station The remote control must be registered to the alarm base station to ensure that the FAZ Z alarm base station responds to the FAZ3000 FB 2 remote control The alarm base station stores the security code of the remote control IS As a result the FAZ Z alarm base station responds to the FAZ3000 FB 2 remote control only if the received security code matches the security code stored in the alarm base station Proceed as follows to register You must be on the top level The LCD should appear as on the right for example with the time
7. technical specifications at the time of print We reserve the right to change the technical or physical specifications Copyright 2007 by Conrad Electronic SE Printed in Germany
8. wet otherwise it may be damaged e Do not leave packaging material lying around This may become a dangerous plaything in the hands of children All maintenance work programming or repairs should only be carried out by a skilled technician or professional workshop Handle the remote control with care even a fall from a low height can damage it b Handling the batteries e Keep batteries out of the reach of children Make sure that the polarity is correct when inserting the batteries Do not leave batteries lying around as they could be swallowed by children or pets In such case seek immediate medical care e Leaking or damaged batteries may cause acid burns if they come into contact with skin Therefore please make sure you use suitable protective gloves Make sure that batteries are not short circuited or thrown into a fire They might explode e Never take batteries apart e Conventional batteries must not be recharged They might explode e If the device is not used for a longer period of time for example when stored remove the inserted battery to prevent it from leaking and causing damage 5 General information The FAZ3000 FB 2 wireless remote control is part of the FAZ3000 wireless alarm system and is used to activate deactivate the FAZ Z alarm base station IS The FAZ3000 FB 2 wireless remote control can be used to toggle the FAZ Z alarm base station between three
9. OPERATING INSTRUCTIONS Version 01 07 CE FAZ3000 FB 2 Wireless remote control Item no 75 08 43 This user manual belongs to this product It contains important information specific to its operation and handling Please bear this in mind when passing on the product to a third party Therefore keep this user manual for future reference A contents list can be found in the table of contents on page 3 nrap Introduction Dear customer Thank you for purchasing this product This product meets the requirements of both current national and European guidelines In order to ensure continued fulfilment of legal requirements and safe operation of this product we kindly ask you to carefully follow the instructions in this user manual Please read the user manual completely and observe the safety and operation instructions before using the product All company and product names contained herein are trademarks of their respective owners All rights reserved Should you have any further questions please contact our technical service Germany Tel no 49 9604 40 88 80 Fax no 49 9604 40 88 48 Email tkb conrad de Mon to Thur 8 00am to 4 30pm Fri 8 00am to 2 00pm Table of contents 1 Prescribed use 22 SCOPES OF delivery criaient reenen aeaea a aaa e EEEE REE AA EE Ea 4 37 Explanation Of CONS ihi riddserreirtaaieisg ranse aeda siaina daiiras i iC Peia aasi 4 4 Safety
10. and the date Briefly press the Meni a A button on the control unit of the FAZ Z alarm base station Use the 4 and buttons to select the sensors menu Confirm by briefly pressing the OK button sensors add appears see the figure to the right Press the OK button again Here X is the number of sensors that have already been registered plus one if no sensor has been registered yet then X 1 You can use the gt button to select the remote control the display in the upper row shows rem con T 12 disarm 16 30 14 12 troubles sensors sensors add sensor X clear rem con 1 clear Briefly press any button on the remote control rem con 1 The alarm base station acknowledges reception by emitting a short signal tone and the LCD on the alarm base station switches to the display for entering the name of the remote control e Use the buttons on the alarm base station to enter rem con 1 the name of the remote control such as the name peter of the person who is using the remote control gt To enter the letters use the 2 9 buttons each of which represents several letters click through as with a mobile phone by repeatedly and quickly pressing the same button gt Numbers and umlauts can also be found on the buttons for instance gt Use the 0 button to
11. control see the user manual of the alarm base station 18 13 Disposal a General information When the product is no longer usable dispose of it in accordance with the applicable statutory regulations b Battery rechargeable battery disposal As the consumer you are legally obliged to return all your used batteries and rechargeable batteries Do not dispose of your used batteries via the household rubbish Batteries rechargeable batteries containing harmful substances are marked with the following icons which alert you to the fact that disposal via the household rubbish is prohibited The identi fiers for the respective heavy metals are Cd cadmium Hg mercury Pb lead identifier is on the battery rechargeable battery for example under the rubbish bin icons on the left You can return your used batteries rechargeable batteries free of charge to any authorised disposal station in your area in our stores orin any other store where batteries rechargeable batteries are sold By doing so you comply with your legal obligations and also make a contribution to environmental protection 19 14 Technical specifications si RANGE isseire raaa up to 100m e Radio frequency s 868 35MHz e Power supply s es 1 x CR2016 Dimensions 40mm x 52mm x 11mm W x H x D e Number of security codes 39 19683 e With an opening to attach to a keychain Up to four remote controls with different secu
12. instructions eae ea eed ee EEN 5 a General information b Handling the batteries 5 General information 6 CONTOS pirer oa waa ta EEEE NO EE E AEEA 8 a Normal button functions b Special function attack alarm 7 Inserting the batteries entering the security code 10 8 Registering the remote control to the FAZ Z alarm base station 12 9 Deleting a remote control from the FAZ Z alarm bas station 14 10 Information on the range i Ea et a eTa Ae eee ere re rere peer E qe eeeer errr mercer ever errretrrerr seer yer 17 12 Maintenance and cleaning eeeceeeceeeseeeeeeeeeeeceeeeeeeeeeeeeseneeeeateeeeeees 18 1S DISPOSAL iseecys crt vet el Re ok ee Nee ee a dedi 19 a General information b Battery rechargeable battery disposal 14 Technical specifications ecceeececeececeeeceeeeseneeeeaeteaeeeeaeeeeaeetaeees 20 15 Brief instructions a Registering the remote control in the alarm base station 21 b Replacing the batteries of the remote control z c Deleting a remote control from the alarm base station 21 16 Declaration of conformity DOC 1 Prescribed use The FAZ3000 FB 2 wireless remote control is a part of the FAZ3000 wireless alarm system The FAZ3000 FB 2 wireless remote control is used to activate deactivate the FAZ Z alarm base station toggle between disarmed internally armed and externally armed
13. le distance between the transmitter and the receiver in normal operation greatly depends on the installation location and the surroundings As arule when mounted in a family home for example all the components should work properly and there should be no radio reception problems Other causes of reduced ranges All types of high frequency interference Any buildings or vegetation Conductive metal parts that are located near the devices or within or near their transmission path for example radiators metallised insulation glass windows reinforced concrete ceilings and so on as well as metallised walls in prefabricated houses Influence on the radiation pattern of antennas due to the distance from the transmitter or receiver to conductive surfaces or objects also to human bodies or the ground Broadband interference in urban areas that reduces the signal to noise ratio the signal is no longer recognised due to this noise Interference radiation resulting from insufficiently shielded electronic devices for example operating computers or similar 16 11 Handling e Protect the product against humidity cold heat dust and direct sunlight The cold for instance when the remote control lies in a vehicle in winter has negative effects on the battery life it may decrease the range as well Do not leave the remote control lying around under any circumstance for instance in an open glove compartment of a vehicle
14. modes namely disarmed internally armed and externally armed The remote control also has a built in panic function The alarm base station can trigger an alarm when a specific button combination is entered on the remote control IS The remote control can be used as an emergency call transmitter for persons at risk for instance cashiers petrol pump attend ants etc in order to trigger an alarm irrespective of the location in case of an attack The remote control has a security code to protect the alarm base station from unauthorised use this code must be entered after inserting the batteries before the initial operation The security code comprises a 9 digit button sequence that must be entered using 3 buttons Thanks to the 3 19683 different codes an extensive protection against unauthorised use is guaranteed since only the remote control registered to the alarm base station can initiate functions using a specific code All other codes are ignored Four remote controls with different security codes can be registered in the alarm base station However any number of remote controls can be then operated using one of these four codes Owing to its compact dimensions the remote control can be also used as a key chain Note that buttons may be pressed accidentally near the alarm base station if the remote control is kept in one s pockets The alarm base station may be activated or deactivated accidentall
15. rity codes can be registered in the FAZ Z alarm base station any number of additional remote controls can be used with the same security code 20 The range depends on the version of the FAZ Z alarm base station used a FAZ Z version with a built in antenna The range of the remote control of the alarm base station is up to 100m Longer or shorter ranges are however possible depending on the installation location of the alarm base station and the position of the remote control see section 10 on page 16 b FAZ 2Z version with the FAZ HF external antenna The range can be more than 100m The external antenna can be installed at a specific distance from the alarm base station This reduces interferences due to the electronics of the alarm base station Longer ranges can be achieved depending on the installation location of the external antenna and the position of the remote control and naturally the ambient conditions see section 10 on page 16 15 Brief instructions a Registering the remote control in the alarm base station Set the alarm base station in the search mode of the remote control Insert the batteries in the remote control In case of the initial operation enter the 9 digit security code or re program it note down and store the security code safely in both cases see pages 5 10 and 11 Press a button on the remote control after completing the programming The alarm base station m
16. sors menu e Confirm your selection by briefly pressing the OK button Use the 4 and v buttons to select the sensors delete menu e Confirm your selection by briefly pressing the OK button The first sensor registered to the alarm base station is now displayed in the example to the right a door window sensor livingr wl 14 disarm 12 25 05 02 troubles sensors sensors add sensors delete contact 1 livingr w1 e Press the gt button to access the menu for remote controls e You can use the 4 and buttons to select the remote controls that you wish to delete the second remote control used by Dana is shown in the example to the right since it was perhaps lost or stolen e Press the OK button briefly The deletion of the remote control must be re confirmed see the figure to the right Deleting the remote control Press the OK button Cancel Press the C button You can go back the list of remote controls by pressing the OK or C buttons you can delete another remote control if desired Ifyou have deleted the desired remote control s you can exit the deletion mode of the alarm base rem con 1 Peter rem con 2 Dana delete Y 0K N C rem con 1 Peter disarm 12 25 05 02 station by pressing the C
17. t button e Youcan use the ext button to set the externally armed mode of the alarm base station This function is used to monitor a house when nobody is present in the house indoor areas are also monitored for instance using the FAZ PIR PIR motion detector e Ifthere is a fault or if a magnetic contact is not closed for instance a window is open the activation is rejected when the button is pressed for the first time The externally armed mode is forced to be set when the button is pressed again b Special function attack alarm In the case of an attack the remote control can be used to immediately set off an alarm This attack alarm can be signalled using different components of the FAZ3000 wireless alarm system for instance using an external siren using the FAZ SI siren control unit IS Note that in the FAZ Z alarm base station you can customise the trigger settings in case of an attack as per the default setting the attack alarm can be activated only using the internal siren On the remote control two button combinations are each joined by a dashed line e Button combination 1 Button ext and button unscharf disarm e Button combination 2 Button int and button unscharf disarm Simultaneously pressing one of these button combinations sets off the attack alarm IS Please note An attack alarm is not triggered when all three bu
18. ttons of the FAZ3000 FB 2 remote control are pressed simultaneously Likewise simultaneously pressing the two ext and int buttons does not set off an attack alarm You can stop the alarm in the usual way simply press the unscharf disarm button briefly on the alarm base station or the remote control 7 Inserting the batteries entering the security code The security code comprises a 9 digit button sequence that must be entered at the time of the initial operation using the 3 buttons after inserting the batteries The security code of the remote control is stored in the alarm base station so that the remote control can be registered in the FAZ Z alarm base station later IS If the FAZ Z alarm base station detects the radio signal of the FAZ3000 FB 2 remote control the alarm base station responds only if the received security code matches the stored security code Proceed as follows 1 Determine a 9 digit security code and note it down on a piece of paper The security code may contain only the numbers 1 2 and 4 forinstance 142142142 The alarm base station can store a maximum of four different security codes IS You should note down the security code and store it properly This is practical when you wish to program another remote control using the same security code at a later date or when you wish to ensure that you do not reuse the same security code accidentally
19. ust now detect the remote control Enter the name of the remote control Return to the top level of the alarm base station press the C button three times b Replacing the batteries of the remote control Open the battery compartment remove old batteries batteries observing the correct polarity and then close the battery compartment The security code is retained when the batteries are replaced the security code need not be re programmed c Deleting a remote control from the alarm base station This is absolutely essential if a remote control has been stolen or lost Proceed as described in section 9 on page 14 21 16 Declaration of conformity DOC We Conrad Electronic Klaus Conrad StraRe 1 92240 Hirschau Germany hereby declare that this product complies with the fundamental requirements and other relevant regulations of directive 1999 5 EC IS You can find the declaration of conformity for this product at www conrad com 22 23 http www conrad com 100 recycled Paper Bleached without chlorine Imprint These operating instructions are published by Conrad Electronic SE Klaus Conrad Str 1 D 92240 Hirschau Germany Allrights reserved No reproduction including translation is permitted in whole or parte g photocopying microfilming or storage in electronic data processing equipment without the express written consent of the publisher The operating instructions reflect the current
20. y and unintentionally 6 Controls ext button externally armed int button internally armed LED unscharf button disarmed 6080 Opening to attach to a key ring The cover of the battery compartment is located at the rear side of the remote control a Normal button functions unscharf disarm button e This button is used to disarm the alarm base station All sensors except the smoke detectors are deactivated You can move around your house freely without setting off the alarm IS An alarm is always triggered when a smoke detector or a glass break sensor terminal KL1 NO contact required connected to the FAZ TF door window sensor is triggered Atriggered alarm can be stopped by pressing the unscharf disarm button The alarm memory is deleted when this button is pressed again int button The internally armed mode of the alarm base station is set This is used to protect the outer shell for instance for protection inside a house at night One can move inside the house freely Ensure that the sensors are configured accordingly internal external sensor The activation is rejected when the button is pressed for the first time if there is a fault or a magnetic contact is not closed for instance a window is open The internally armed mode is forced to be set when the button is pressed again ex
Download Pdf Manuals
Related Search