iBT21 IB English 08112014-9-13.ai
Contents
1. Periods of Nonuse If the unit is to be left unused for an extended period of time such as a month or longer the power cable should be unplugged from the unit to prevent damage or corrosion Servicing The user should not attempt to service the unit beyond those methods described in the user s operating instructions Service methods not covered in the operating instructions should be referred to qualitied service personnel Questions Visit www ihome com or call 1 800 288 2792 Toll Free Battery Cautions and Tips Only use the recommended supplied batteries or equivalent Use alkaline batteries for longer life Do not mix old and new batteries and do not mix alkaline carbon zinc or rechargeable nickel cadmium batteries e Insert batteries with proper polarity as indicated Remove exhausted batteries from product e Recharge rechargeable batteries under adult supervision e Do not attempt to recharge non rechargeable batteries Do not open batteries or heat them beyond normal ambient temperatures To prevent battery leakage or damage remove batteries from a product if it will not be used for a month or longer Use extreme caution handling leaking batteries avoid direct contact with eyes and skin If battery leakage comes in contact with eyes IMMEDIATELY flush the eye with lukewarm and gently flowing water for at least 30 minutes If skin contact occurs wash skin with clear water for at lea2. Not Connected or similar message appears select iHome iBT21 to connect it If prompted for a passcode enter 1234 on your device s keypad If pairing is successful 2 beeps will sound PAIR will appear briefly in the bottom display and the Bluetooth icon will become solid There should also be an indication on your device If no device is successtully paired within 2 minutes the unit will default to previous mode Once unit is paired to a device it will attempt to autolink when the device is within range about 30 feet Pairing with a Different Device Using the iBT2 1 1 When AC power is connected the unit will automatically link with the previously paired Bluetooth device as long as that device is still within range approx 30 feet To pair with a different device follow steps 1 4 under Pairing Your Device on previous page Playing Audio Via Bluetooth 1 Press the Button to turn on the unit The Bluetooth icon will be displayed when a linked device is in range and detected You can then listen to audio streamed wirelessly from your paired iPad iPhone iPod or other Bluetooth device 2 Press the Su Button to play audio from your device Press again to pause play and once more to esume play When Bluetooth audio is active the audio icon will be displayed around the Bluetooth icon NOTE If the AUX symbol is on the display that indicates you are in AUX mode Press he Mode Button to switch to
3. to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment e NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CAN ICES 3 B NMB 3 B IC Statement This device complies with Industry Canada RSS 210 Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may
4. turn off your device too Connect To Audio Source Sleep Operation Using the iBT2 Sleep mode lets you sleep to your Bluetooth device until the unit shuts off at a selected time It will send a pause command to your device too Only while the unit is in Bluetooth mode 1 Press the Sleep Button to enter sleep mode The Sleep Icon will appear on the display to indicate it is in sleep mode 2 Press the Sleep Button as needed to adjust the sleep timer from 120 90 60 30 or 15 minutes or turn sleep mode OFF by pressing the Button 3 When the display changes back to show the real time press the Sleep Button once to show the sleep ime remaining Pressing it again to change sleep time to the next lowest increment 4 To stop listening at any time press the Button to turn the unit OFF Remember to turn off your device 00 NOTE The next time you turn the unit on and press Sleep Button it will default to the last set sleep time as well as the last listening mode selected AUX Bluetooth Dimmer Operation During normal operation press the Snooze Dimmer Button to control the brightness of the LCD display USB Charging You can charge devices via the USB port located on the back of the unit while the unit is connected to AC power Clock backup batteries do not power the USB charging port Connect a USB cable not included to the USB port and connect the other end to your device Monitor th
5. unit selects the most recently linked Bluetooth device as your wake o source If no Bluetooth device is detected the iBT21 will automatically default to buzzer alarm See page 8 to setup your Bluetooth device Setting the Alarms ote make sure you have an hour of audio on your Bluetooth device and that the volume on the device is set to a volume that will wake you not at minimum volume 2 Press and hold the Button until the current alarm time flashes in the lower part of the display and a beep sounds Press the or Button to set the alarm time Remember to set the correct AM or PM time 3 Press the Button or if no button is pressed within 10 seconds Two beeps will confirm alarm time and exit alarm setting mode The alarm will be armed and the corresponding alarm icon will appear 4 To set Alarm 2 just follow steps 2 3 using the Button Reviewing Arming and Disarming Alarms 1 Once an alarm is set it is armed and the lower part of the display will show the alarm time If both alarms are armed the earliest alarm time will show 2 To arm disarm the alarm just press the associated alarm button to toggle it on or off If the alarm is armed the related alarm icon will appear in the upper part of the display Resetting the Alarm to Come On the Next Day When the alarm is sounding press the Button to stop alarm and reset it to come on the following day A Using the iBT21 1 Press and hold the Snooze Dimmer
6. B D claration d Industrie Canada IC Cet appareil satisfait aux exigences d Industrie Canada prescrites dans le document RSS 210 Son fonctionnement est soumis aux deux conditions suivantes 1 l appareil ne doit pas causer d interf rences et 2 il doit accepter toute interf rence y compris celles risquant d engendrer un fonctionnement ind sirable de l appareil Cet appareil r pond aux crit res d exemption des limites d valuation courante indiqu es la section 2 5 de la norme RSS 102 et de conformit aux expositions aux radiofr quences de la norme RSS 102 les utilisateurs peuvent obtenir des informations sur l exposition aux radiofr quences et la conformit au Canada QDID B021180 Table of Contents Included Meet Your ETO 1 2 Installing Clock Backup Batteries rra 3 The Display Setting Up the Unit Turning the Unit ON and OFF 4 Sette BULLE red enee Eege 5 Setting the Alarms Reviewing Arming and Disarming Alarms ccccccseeeeseeeteeetteetteenteeens 6 Resetting the Alarm to Come on the Next Do 6 Siiooze Op ration Ze Ale autant rrearen 7 Using Bluetooth Pairing UARRA 8 Pairing with a Different Device Playing Audio Via Bluetooth Remote Power On Via Bluetooth 9 Playing Audi vid AUX AAA 10 Sleep Operation Dimmer Operation USB Charging 00 ccccceccseeeeseeeetcteeeteeeeetsteeenees 11 Coiisumef Parkearen meka 12 13 Baten Caio and gai 14 GURU aea aaa 15 ENGEN nn DR M E E EES 16 I
7. Bluetooth mode CO Press the or Button to navigate tracks on your device gt Press the or Button to adjust the system volume You can also adjust volume on your device 5 When done listening press the d Button to turn the unit OFF Remember to turn off your device 00 Remote Power On Via Bluetooth When within range about 30 feet of the unit your previously paired device will autolink to the unit Pressing play on your device will remotely power on the unit and in a few moments your audio will play through the unit at the current set volume On some devices alert sounds from the device will also be transmitted 9 Using the iBT21 Playing Audio via Aux In 1 Connect one end of the included 3 5mm stereo audio cable to the Auxin jack on the back of the unit and connect the other end to the headphone or line out jack on your audio device 2 Press the Button on the unit to turn it on then press the Mode Button to select AUX mode The AUX icon will appear on the top left of the display 3 Power on the audio device and use the controls on the device to play or pause audio and navigate tracks 4 Press the or dd Button to adjust the system volume You can also adjust volume on your Q device gt 5 When done listening press the O Button to turn mobile phone PSP iPod MP3 MP4 the unit OFF Remember to
8. Button for a few seconds to enter set snooze timer mode A beep Snooze Operation will sound and the display will flash Press the or Button to set the snooze timer from 1 to 29 minutes Press the Snooze Dimmer Button to exit Two confirmation beeps will sound 2 Press the Snooze Dimmer Button after the alarm sounds The alarm will be silenced and come on again after the set snooze time Snooze can be pressed several times during the 1 hour alarm cycle Sure Alarm The iBT21 has a sure alarm feature If backup batteries are installed the buzzer alarm will still sound in the event of power failure Using Bluetooth Pairing Your Device Using the iBT2 NOTE See the iBT21 Bluetooth Connection Guide for complete pairing details Whenever AC power is connected this unit will attempt to autolink to a previously paired device If no device is paired the unit will automatically enter pairing mode for 2 minutes You can manually initiate pairing without turning on the unit by following steps 1 3 below l Make sure your Bluetooth device is fully charged Turn on your Bluetooth device and make it discoverable by turning on Bluetooth mode check in Options or Settings Press and hold the Bluetooth Pairing Button on the back of the unit for 2 seconds The unit will beep and the Bluetooth icon will flash on the display indicating the unit is in pairing mode iHome iBT21 should appear in your device s menu If Not Paired
9. artment door located on the bottom of the unit 3 Insert two AA batteries checking the and ends of the batteries match the diagram inside the compartment We recommend to use alkaline battery for longer life Do not mix alkaline standard carbon zinc or rechargeable nickel cadmium batteries 4 Close the compartment cover Note Make sure you dispose of batteries properly see your local regulations Battery Low Indicator The Battery Low Indicator is located at the top left of the display When it blinks it is time to replace backup batteries 3 The Display Using the IBT2 1 Bluetooth AUX indicator Za ZO ZO Alarm 1 amp Alarm 2 OK Battery Low Indicator CS HID Ov ro Sleep PM Indicator PM H l Wake to bure rr MD am iz Alarm time AM PM Indicator Year Date Indicator DATE CHL LI Aca fime Da o outlet Setting Up the Unit Ti 1 Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet Turning the Unit ON and OFF 1 Once the AC adaptor is properly connected press the Power Button located on top of the unit to turn the unit Ze ndicator Indicators ndicator ndicator e Display ON ON will appear briefly on the display and the LED bei indictator will light up 2 Press the Power Button to turn the unit OFF Th
10. cause undesired operation of the device Le pr sent appareil est conforme aux CNR d Industrie Canada applicables aux appareils radio RSS 210 L exploitation est autoris e aux deux conditions suivantes 1 l appareil ne doit pas produire de brouillage et 2 l utilisateur de l appareil doit accepter tout brouillage radio lectrique subi m me si le brouillage est susceptible d en compromettre le fonctionnement The device meets the exemption from the routine evaluation limits in section 2 5 of RSS 102 and compliance with RSS 102 RF exposure users can obtain Canadian information on RF exposure and compliance Le dispositif rencontre l exemption des limites courantes d valuation dans la section 2 5 de RSS 102 et la conformit l exposition de RSS 102 rf utilisateurs peut obtenir l information canadienne sur l exposition et la conformit de rf QDID B021 180 nonc FCC i BT2 D claration de la FCC relative l exposition aux radiations FCC ID EMOIBT21 Cet quipement est conforme aux limites d exposition aux radiations de la FCC RF fix es pour un environnement non IC 986B IBT2 1 contr l Cet appareil est conforme la section 15 des r glements de la FCC son utilisation est soumise aux deux conditions suivantes 1 Cet appareil ne doit pas causer d interf rences nuisibles et 2 cet appareil doit accepter toute interf rence re ue y compris les interf rences qui peuvent causer un mauvais fonctionnement e Avert
11. e Power Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket Cleaning The unit should be cleaned only using a warm damp cloth Do not use solvents etc Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product 12 Attachments Do not use attachments not recommended by the product manufacturer Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time This will prevent damage to the product due to lightning and powerline surges Overloading Do not overload wall sockets extension cords or integral convenience receptacles as his can result in a risk of fire or electric shock Damage Requiring Service The unit should be serviced by qualified service personnel when A the power supply cable or plug has been damaged B objects have fallen into or liquid has been spilled into the enclosure C the unit has been exposed to rain D the unit has been dropped or the enclosure damaged E the unit exhibits a marked change in performance or does not operate normally
12. e approx 30 feet To pair with a different device you must turn off Bluetooth capability on the already paired device or take it out of range For further information and to see the latest instructions visit www ihome com support L Limited 1 Year Warranty iHome Products a division of SDI Technologies Inc hereafter referred to as SDI warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of one 1 year from the date of original purchase Should this product fail to function in a satisfactory manner it is best to first return it to the store where it was originally purchased Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period SDI will r upon de epair or at its discretion replace this product without charge This decision is subject to verification of the defect or malfunction ivery of this product to the Factory Service Center authorized by Customer Service If service is required please call Customer Service at 1 800 288 2792 to obtain a Return Authorization Number and shipping instructions Disclaimer of Warranty NOTE which have been damaged by negligence or willful actions misuse or accident or which have been modified or repaired by unauthorized persons KO CD s or This warranty is valid GA in the United States of America and does not extend to owners of the
13. e LED indicator X bidea will turn off and OFF will appear briefly on the display NOTE The unit has an automatic shut off function if no audio is detected for 3 minutes the unit will power off 4 see page 9 for details on powering the unit ON remotely using a paired Bluetooth device Setting the Time Using the iBT2 1 1 Press and hold the Clock Adjust Button located on the back of the unit until the time flashes in the display and a beep sounds 2 Press and release the or Buttons to adjust the clock fo the current time hold to advance or reverse rapidly Make sure to set the correct AM PM time The PM indicator appears to the left of the time display there is no AM indicator 3 Press and release the Clock Adjust Button The year will flash on the display 4 Press and release the or Buttons until the current year is displayed hold to advance or reverse rapidly 5 Press and release the Clock Adjust Button again The date will flash on the display 6 Press and release the or Buttons until the current date is displayed hold to advance or reverse rapidly 7 Press and release the Clock Adjust Button again to complete time setting You will hear 2 beeps to contirm time setting is complete NOTE Press the or Button at any time during time setting to toggle between standard 12 hour display and 24 hour military display modes Using the iBT21 1 By default the
14. e charging status on your device If it doesn t charge you must charge it using the charger that came with it 11 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner this unit has been designed and manufactured to ensure your personal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in these instructions and on the unit 1 Water and Moisture The unit should not be used near water For example near a bathtub woshbowl kitchen sink laundry tub swimming pool or in a wet basement Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block ventilation openings Also it should not be placed in a builtin installation such as a bookcase or cabinet which may impede the flow of air through the ventilation openings Heat The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the applianc
15. iHome d b Bluetooth Wireless See Dual Alarm Clock rte D instruction manual iBT2 Introduction Thank you for purchasing the iHome iBT21 This product is designed to provide high quality wireless sound for your iPad iPhone iPod computer PDA or other Bluetooth audio device Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit Please read them carefully and keep for future reference Maintenance e Place the unit on a level surface away from sources of direct sunlight or excessive heat es Protect your furniture when placing your unit on a natural wood and lacquered finish A cloth or other protective material should be placed between it and the furniture e Clean your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as benzene thinner or similar materials can damage the surface of the unit FCC Information iBT21 FCC Radiation Exposure Statement FCC ID EMOIBT21 IC 986B IBT21 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This device complies with Part 15 of the FCC Rules operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation e Warning Changes or modifications
16. issement Tout changement ou modification apport cet appareil sans le consentement expresse de la partie responsable pour la conformit peut annuler le droit de l utilisateur d utiliser cet appareil e REMARQUE Cet quipement a t test et jug conforme aux limitations pour un appareil num rique de Classe B selon la Section 15 de la r glementation FCC Ces limites sont con ues pour offrir une protection raisonnable contre les interf rences nocives d une installation r sidentielle Cet quipement g n re utilise et peut mettre des fr quences radio et s il n est pas install et utilis selon les instructions peut causer des interf rences nuisibles aux communications radio Cependant il n y a aucune garantie qu une interf rence ne prendra pas place dans une installation particuli re Si cet quipement ne cause pas d interf rence nocive la r ception de la radio ou du t l viseur ce qui peut tre d termin en allumant et fermant l quipement l utilisateur est encourag tenter de corriger l interf rence en utilisant l un ou l autre des moyens suivants R orientez ou resituez l antenne de r ception Augmentez la s paration entre l quipement et le r cepteur Branchez l quipement dans une prise d un circuit diff rent que celui dans lequel est branch le r cepteur Consultez le marchand ou un technicien exp riment en radio t l viseur pour obtenir de l aide CAN ICES 3 B NMB 3
17. ncluded e ETZI Alarm Clock es 100V 240V universal AC adaptor e 2 AA batteries e Stereo audio cable AA ell e AA of 2 AA batteries alarm clock power adaptor iBT2 stereo audio cable iBT2 Mode Button Bluetooth AUX Meet Your iBT2 Top Sleep Button P Lower Volume Button Raise Volume Button Alarm Reset Power Button Fwd Setting Button Alarm 1 Button Alarm 2 Button Rev Setting Button gt mis Snooze Dimmer Button berr Fees 2 LED Indicator Play Pause Button Back Aux in Jack Narea Jack Bluetooth Pairing Button 4 TT USB Charging Port Clock Adj Button Replacing amp Installing Clock Backup Batteries Using the iBT2 The iBT21 uses 2 AA batteries included for backup to provide continuous alarm operation and clock settings in the event of a power failure If the backup batteries have been installed and a power failure occurs or the AC adaptor is accidentally disconnected the display backlight will not remain lit but current time and alarm time settings will be temporarily maintained Otherwise you must reset the time and alarm settings Note You should replace backup batteries when the Battery Low Indicator appears on the display Please make sure the AC adaptor is connected Otherwise all settings may be lost during battery replacement 2 Open backup battery comp
18. product other than to the original zuez In no event will e liable to you or any third party for any consequential or incidental damages any lost profits actual exemplary or punitiv damage may not state Your ack binding iBT2 1 20 his warranty is valid only if the product is used for the purpose for which it was designed lt does not cover i products cracked or broken cabinets or units damaged by excessive heat iii damage to digital media players ape cassettes if applicable iv the cost of shipping this product to the Factory Service Center and its return to the owner a SDI or any of its affiliates contractors resellers their officers directors shareholders members or agen oO s Some states do not allow limitations on implied warranties or exclusion of consequential damages so these restriction apply to you This warranty gives you specitic legal rights and you may also have other rights which vary from state t Oa nowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractual to you upon your transfer of currency money order cashier s check or credit card for purchase of your SDI product ka 2014 SDI Technologies Inc All rights reserved Questions Visit www ihome com or call 1 800 288 2792 Toll Free 14080118 16 Printed in China
19. st 15 minutes Seek medical attention if any symptoms occur Store in cool dry ventilated area away from hazardous or combustible material Do not dispose of batteries in the household trash or fire e Follow applicable laws and local regulations for the disposal and transportation of batteries Unit doesn t respond no power Troubleshooting e Check that all connections are correct and properly plugged in e Make sure your device is properly paired with the iBT21 e Make sure the Power is ON indicated by ON appearing briefly on the display and the LED indicator lighting up e When turning unit on via Bluetooth initiate play mode on paired device unit can take up up to 10 seconds to power on Resetting the Unit If the iBT21 is not operating properly you may wish to reset the unit To do so unplug the AC adapter and remove the batteries from the unit NOTE You will then need to reset the time and any previously set alarms Trouble pairing device computer with iBT21 Bluetooth implementation varies depending on your devices hardware and operating system Please see our website for updates on pairing Make sure you have the latest firmware for your device Make sure your device is working properly Check your devices manual for details on Bluetooth pairing and linking e When you power ON the speaker it will automatically link with the last previously paired Bluetooth device if the device is still within rang
Download Pdf Manuals
Related Search