Home

PDF File

image

Contents

1. Attention Antenna Power Using the UP DOWN buttons select ANT Power and press the LIFT RIGHT keys select ON to provide 5V power supply to the antenna and select OFF to turn off the 5V power supply to the antenna Please note that the antenna must support this feature otherwise please turn off the 5V power supply feature 4 4 CA System 4 4 1 About AVIT CA When entering into CA system select CA information and you will catch relevant information about CA such as serial number revision etc 19 Systerm CA Information CA Status Mai info WE Change MN Close P 4 4 2CA Status Select CA Status press OK to enter into Subscription Status CA Status CA PAIRING CA NO CARD 4 4 3 Factory Setting Select Factory Setting when your press the CAS Press OK to enter factory setting Then press UP and Down to either System Information or Load Default OTA Settings Modify PIN in order to achieve that 20 just press OK to confirm 3 4 2 1 System Information 3 4 2 2 Reset Service Data 3 4 2 3 System restore to factory default 3 4 2 4 Reset Configuration Data Factory Setting System informatior Resert Service Data System Restore to factory default Reset Configuration Data Choose Change OK Confirm ER Close 5 Shortcut 5 1 AUDLO Audio language optional Sound Mode Audio Track 5 2 TEXT Tel
2. disconnect device shall be easy to operate Note This product install diodes Do not open the cabinet to avoid the unit direct exposure to radiation Unit Cleaning After the unit power is turned off you can clean the cabinet panel and remote control with a soft cloth lightly moistened with a mild detergent solution Attachments Never add any attachments and or equipment without the manufacturer consent as such additions may result in the risk of fire electric shock or other personal injury Locating Slots and openings in the cabinet are provided for ventilation to protect it from overheating Do not block these openings or allow them to be blocked by placing the STB on a bed sofa or other similar surface nor should it be placed over a radiator or heat register Power Cord Protection Place the power supply cord out of the way where it will not be walked on Please take special attentions to cords at plugs convenience receptacles and the point where they exit from the unit Object and Liquid Entry Never put objects of any kind into this STB through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill any liquid on the STB Note Moisture may be formed on the lens In the following conditions e when the unit is suddenly moved from a cold environment or an air condition room to a warm place e immediately after a heater has been turned on e
3. Adopt the powerful chip MSTAR CPU Speed 600MHz MPEG 4 AVC high profile level 4 1 MPEG 2 MP ML DDRAM Memory 128Mbytes Flash 4Mbytes HDMI 1 3 Output USB 2 0 Interface for browse PIC and Upgrade SW Fully DVB C compliant 2000 channels TV and radio programs 9 Fully support 7 days of electronic program guide EPG 10 OSD teletext DVB compliant and subtitle function supported 11 Automatic turn on off by timer setting 12 Multi language supported English French German and Italian Spanish Portuguese Dutch 13 kinds of Languages 2 Before installation 2 1 Hardware 2 1 1 Front Panel family TV C 1720AC 1 Power 2 1 2Back Panel 1 RF IN Connect to coaxial cable 2 LOOP OUT To connect a TV set to receive analogue channels or to connect an extra receiver 3 SPDIF To connect your receiver to the audio system using an S PDIF cable 4 USB Physical interface for updating and connect external hard disk 5 HDMI To connect to the TV using HDMI cable 6 CVBS To connect to the TV using A V cable for video output 7 Audio L To connect to the TV using A V cable for audio output 8 Audio R To connect to the TV using A V cable for audio output 9 DC DC 5V power 2 1 3 Remote Control Unit gt SUBT AUDIO TEXT FAV DELETE TV RADIO LIST ASPECT REC PLAYR REVW lt 4 FF b gt STOP US SLOW REC LIST al POWER Power ON OFF L R sound track selection MUTE
4. INFO to show the EPG 6 Autonomia 13 15 13 45 Floyd Spanyolorszagban angol ism sor 7 r sz 1992 La Mancha tartomany s Madrid La Mancha a hatalmas sz l skertek s olajfaultetv nyek f ldje 4 WE Change DE Play E Close WW 7 Volumes Audio Volume can be adjusted using either the RCU or the STB front panel keys for TV or Radio services A handy Audio MUTE function is also 24 available on the RCU 8 Recordings This box has Personal Video Recorder recording function NOTE Recording requires that a USD storage device is connected formatted in FAT32 only Press REC button on the remote t directly start a recording The recording will start after a few seconds after REC has been pressed A REC icon will be displayed in the top left corner of the screen while recording The recording will continue till STOP is pressed or the USB device is full 25 9 Accessories Following items are included in the packaging 1 unit Receiver 1 pc Remote Control Unit 2 pcs AAA Batteries 1 pc A V cable 1 pc User Manual 26 IV TROUBLE SHOOTING The display on the Check that the main front panel does not Main cable is not connected cable is plugged into light up power socket Bad Picture Blocking Try a signal attenuator to Signal is too strong error the RF In port Check the antenna Poor signal quality or bad No picture or sound system Check cable Interconnecti
5. User Manual DVB C HD Cable Receiver Model Number C 1720AC CONTENT SAFETY PRECAUTIONS nasal Y dn 3 ENVIRONMENT PROTECTION sicsscccsscevccdcececccsverscsssveceseessesescedsaseveceses 5 GENERAL INFORMATION susissssessaweccvccaeccuvens ee ee NENNEN 6 PREFACE ala 6 BEFORE INSTALLATION ees eege eege ee bati 6 21 A Ee d O COCIDO PE EEA ANE GY iene 7 ZAM OOPS Y CN UC 7 212 BACK anelai Y Y UO 7 21 3 Remote Control Unit ne Y GY Y YY 8 S TIBAINSTAULATION citados 10 MAIN MENU roinneann eaaa aa EA AN OaS 11 AA E ee 12 4 1 2 Service List Wana se ha ce Y FFY Y SF 12 ALZA FUESE ii 12 Ada Record HE E 13 42 Eo 14 AZ Parental Controls dara ara Y CY 14 2 22 a AA II CLO 14 4 2 3 Language d ln E 15 2A A Wu Ee dE 15 E A EEN 16 2 2 E E 16 4 3 Auto Seal a 17 AZ East Sears 17 43 3 Manual eang ala 18 DSA E A II e YY DA Dd EON 18 44 e E EE 19 AAs SADOWEAVIT CA UG GO 19 MAZ VENIS ore 20 a4 Factonm cun YG 20 5 SHORT CUT a GO A DA 21 5 1 AUDLO Audio language optional 21 D EE 22 5 2 INFO TIRANO E 22 5 4 EXIT Exit section ccoocococccnnnoconnncnnonanoncnonananoncrnaranoncrnnonons 23 EAST EEN 23 5 6 DELETE Delete program oooocononccononicaninanananaccnanan conos 23 5 7 BACK Back lo last PaO 6 iii O 23 5 8 MENU To enter into main men 23 6 ELECTRONIC PROGRAM GUIDE EPG ooccccconncccnnnonanocnnocnnnccnncnnnoss 23 7 VOLUMES cas o 24 8 RECORDING S visu ee EE 25 9 EE Eege 26
6. Mute selection O ON OFF timer 0 9 Channel and numerical value selection EPG Show Electronic Program Guide INFO Program Info MENU Enter into main menu RECALL Switch between current and last channels EXIT Exit current selection OK Confirm the selection or show the channel list Volume Volume down or up PAGE PAGE Page down or up SUBT Subtitle ON OFF AUDIO Audio language Selection TEXT Show Teletext FAV Display Favorite list DELETE Delete program TV RADIO Change the mode between TV and RADIO LIST List out ASPECT Aspect REC Recording the current programme PLAY Playback the recorded files from external USB device REW Rewind during playback FF Fast forward during playback STOP Stop recording or playback PAUSE Pause playback SLOW Slow down the playback REC LIST Go to the recording list directly RED GREEN YELLOW BLUE buttons Used for TEXT 9 3 STB Installation Step 1 System connection examining Please refer to the receiver back panel diagram examine the signal cable a v equipment hard disk and power supply well connected or not If you already have a CA card please put the CA card with up face into the CA card socket Step 2 Switch on the power of the PWR After well connected all the cable power on the STB Then power indicator light red light turns red power on the TV and switch the TV to Video mode if STB pre exist programs there will be Channels No and Signal Quality
7. IV TROUBLE SHOOTING wssiscscssssascsescasccsecasesescatcsinsatceesonestansanctasvavestnenss 27 V A ni a lt Ga NR AU 29 L SAFETY PRECAUTIONS CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash Warning The exclamation point with arrowhead symbol To reduce the risk of within an equilateral triangle within an equilateral electric shock don t open the is intended to alert the user triangle is intended to cabinet Refer servicing to to important operating and alert the user to qualified personnel only maintenance servicing dangerous voltage and to prevent from a risk of electric shock WARNING Do not use this STB where contact with or immersion in water is a possibility Do not use near flower vase washbowls kitchen sinks laundry tubs swimming pools etc WARNING Do not put the candle or lamp stand on the cabinet otherwise there is the danger of fire WARNING The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit If you are not sure of the type of power supply for example 120 or 230 V to your home consult your local dealer or local power company WARNING This product install diodes Do not open the cabinet or touch any parts in the inner mechanism Consult your local dealer for technical service if the opening is required WARNING If use the power supply plugs and appliance couplers as a disconnect device
8. banners on the TV screen Step 3 All Channel Search In case of without pre exist programs there will be only open screen picture on the screen Use the Left or Right cursor button to select Yes on the Search Guide Menu press OK start program searching User can find detailed searching information during the procedure of program searching When searching finished there will be indicate on the screen how many programs you get totally Step 4 The selection of TV Radio or Recording program Use UP and DOWN to select your favorite program In case of want to listen to the radio switch the TV Radio when Non Menu Mode In case of want to record the program press record for showing recording program 10 A Main Menu If you want a further set to STB on the mode of Non Main Menu press the shortcut Key MENU on the Remote Control Unit to enter the main menu there are four Menus included Factory Setting Language Setting Time Setting A V Output Setting CC 4 1 System Tools the menu of system tools 4 2 Configuration the menu of configuration 4 3 Installation the menu of installation 4 4 Utilities the menu of utilities gt Please press Left and Right to select the model as you prefer Press OK then you can enjoy all the menu operation freely 11 4 1 System tools 4 1 1 Service List Manager Select Service list manager when System t
9. USB device into FAT32 only 13 4 2 Configuration 4 2 1 Parental Control Select Parental Control press OK to enter into Parental Control Parental Setting ANSOrsiMp Change PIN Code System Installation Configuration i Utibtes Change 4 2 2Display Setting Select Display setting press OK to enter into Display setting Display Setting Menu Opacity Volume Bar Display Time info Box Display Time 14 4 2 3 Language Settings Select Language Settings and press OK to enter into Language System Menu Then use LEFT and RIGHT to set each item under the submenu Menu language Audio language Subtitle language as you prefer Language Setting Menu Language Audio Language Be Attention Audio Language and Subtitle should be supported by local authority 4 2 4 Time Settings Select Time Settings when Configuration and press OK to enter into time setting According to your time zone you would set GMT at your local setting Press LEFT and RIGHT to select the automatic turn on off For example set Enable to mean the function is on and then you can type the time as your need 15 Local Offset Wake Up Switch Wake Up Time Sleep Time Switch Sleep Time Attention the time setting absolute number is 0 23 for hours and 0 59 for minutes 4 2 5 A V Settings Select A V Setting when Conf
10. _ in a steamy or very humid room If the moisture forms inside the unit it may not operate properly To correct this problem turn on the power and wait about two hours for the moisture to evaporate Parts Replacement When the unit parts need to be replaced user should make sure the service technician use the replacement parts specified by the manufacturer or having the same characteristics as the original part Unauthorized replacement may put the unit In the risk of fire electric shock or other hazards Safety Check After all the maintenances and repairs are done user is reguired to reguest the service technician to conduct the overall safety check to ensure the machine is In the proper condition II ENVIRONMENT PROTECTION E Attention Your product ls marked with this symbol lt means that used electrical and electronic products should not be mixed with general household waste There is a separate collection system for these products Information on Disposal for Users private households in the European Union Used electrical and electronic equipment must be treated separately and In accordance with legislation that requires proper treatment recovery and recycling of used electrical and electronic equipment Following the implementation by member states private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge In some countries you
11. ater is a possibility Eguipment should not be placed on objects such as vases which filled with liquids If use the power supply plugs and appliance couplers as a disconnect device disconnect device shall be easy to operate The batteries shall not be exposed to excessive heat such as sunshine fire or the like 30
12. etext page Press the TEXT on the RCU to opens the Teletext function P100 166 YLE TEKSTI TV 18 11 17 07 28 PLE 113 Hallitus sopuun eneraiastrategiasta 112 Kuntavero nousee 14B ss a kunnassa 108 Maakuntaradioissa yha ulosmarsseJa 13 Kin 1haisolkeusrynaa toruu ee 206 Mikko Hirvonen Fordin tehdastalliin 5 3 INFO Information When entering into Non Menu mode and press INFO the current channel s information will be shown on the screen Including Channel No Channel Name Signal Quality and so on 22 5 4 EXIT Exit section 9 5 List Press List on RCU and use Left and Right to switch between TV RADIO FAV and use UP and Down to select channels finally press OK to confirm 5 6 DELETE Delete program 5 7 BACK Back to last page 5 8 MENU To enter into main menu 6 Electronic Program Guide EPG Select GUIDE on RCU and then press OK enter EPG Menu 23 The following information can be found from the EPG lt gt _ lo display the program info you are watching lt gt _ To view the weekly TV forecast and reserves your favorite program Use UP and DOWN select program and LEFT and RIGHT view the TV forecast Program Guide Channel 1 Fri 18 11 2005 gt 1 YLE TV1 14 55 Muumilaakson tarinoita 2 LENS 15 20 TV2 Pikku Kakkonen 5 YLE FST 8 YLE24 9 YLE Tee Y Choose Shange Date Please press
13. iguration Press OK to confirm You would change the factors on Audio Video as your perform 4 3 Installation 16 There are three search ways include automatic search fast search and manual search 4 3 1 Auto search The searching will spend long time to find all channels exist in reality Press OK to stop automatic search Searching Radio 6 YLE PEILI YLEQ YLEN KLASSINEN YLE FSR YLEMONDO YLE X3M WN Searching 122M 6900sps 128QAM Leve 0 AW AT 0 4 3 2 Fast search According to your choice on digital frequency you will search the channels exist in reality Because of that the time would be saved and the searching speed increase Press EXIT to stop network search 17 Searching 474M 6900sps 128QAM Levei a 100 Quality 4 3 3 Manual search Only store current searched channel then add the programs to your channel list 4 3 4 Search setting Select Search Settings when Installation press OK to enter We had prepared all channel information for your convenience like Channel 18 No Frequency Bandwidth Ant Power Save Type and Search Type You only need highlight Search and then press OK STB will be automatically searching After finishing searching the screen will show how many programs are searched out depends on what type you choosed Search Setting Search Type Antenna Power
14. ons l connections No sound and picture Press the key on the but the front panel The unitis in standby mode RCU shows time The RCU is not batteries exhausted Replace batteries working 1 The batteries in your 1 Replace the batteries remote 2 Check that there is The remote control control need replacing nothing in will 2 There is an obstruction the way of the path not operate your STB blocking the signal path between between the remote control the remote control and and the box the receivers Check the connected The hard disk problem cable The recording function The connection problem Require the resell to is not working at all The signal problem check and solve this problem Note if you cannot solve the problem by referring to the above trouble shooting please contact your re seller 28 V SPECIFICATIONS Input Signal Level Range Standard ISO IEC 13818 1 Transport stream ISO IEC 13818 2 H 264 AVC MPEG 2 MP HL MPEG 4 SP ASP VC 1 RealMedia Profile Level 4 3 16 9 Letter box Full screen Center screen Video Synchronization 300mVp p Scope Video Resolution 1080i 1080p 20p 576i AUDIO DECODING Standard ISO IEC 13818 3 MPEG 1 layer UI MPEG 2 layer II MP3 MPEG 4 AAC AAC AC 3 E AC 3 WMA 29 Aspect Ratio Audio Decoding S PDIF Digital Audio 1 Coaxial Output Operation temperature Caution Do not use this STB where contact with or immersion in w
15. ools press OK to confirm Use UP and DOWN to highlight the programs and press to OK to switch between your favorite list and channel list You would press the color button to easily manage your channels Color buttons function Green Add Fav Blue Lock Yellow Move TV Radio Parental Lock Unlock Choose choose any program you like Change change any program you dislike Type Service List Manager TV 4 1 2 Files Manager Select File Manager when system tools press OK to enter into Files 12 Manager Currently file manager is for USB file browse and software upgrade and multi function will be added in the future En DUNA Files Manager 25 Choose AF WE Confirm EW Close 4 1 3 Record list Select Record list and press OK button to enter into record list This menu will show the USB device file system full capacity free capacity You can playback and edit the recoded files from this menu as well Record List Conax_220000000000000 TVP2_20090731 092942 ts TVP_INFO 1 gt ___20090731 093000 ts CCTV_220000000000000 ts CBBC_Channel 200307 17 095343 ts _YLE_TV28 p JI _20051118 150132 ts TVP2_20090731 093001 ts Conax_220041028 162545 ts UP DWON to select the recorded files by pressing UP DOWN button Green button to delete the selected file Yellow button To delete all the recorded files OK button to playback the selected file Red button to format the
16. r local retailer may also take back your old product free of charge if you purchase a similar new one Please contact your local authority for further details If your used electrical or electronic equipment has batteries or accumulators please dispose of these separately beforehand according to local requirements By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling Information on Disposal for Business Users In the European Union If the product is used for business purposes and you want to discard lt Please contact your dealer who will inform you about the take back of the product You might be charged for the costs arising from take back and recycling Small products and small amounts might be taken back by your local collection facilities In other Countries outside the EU If you wish to discard of this product please contact your local authorities and ask for the correct method of disposal HI GENERAL INFORMATION 1 Preface Thanks for your purchase digital cable receiver The latest technology and the outstanding design are adopted to provide high reliability and picture Stability for your convenient operation strongly advised reading the manual before using Conditional Accessing System supported

Download Pdf Manuals

image

Related Search

Related Contents

  Dynex DX-CRMN1 Computer Hardware User Manual  Operation Procedures of Paint Booth  さくいん [PDFファイル/341KB]    「SMV-401」取扱説明書(約1MB)  Cisco 15310E-EIA-HDB= network switch module    取扱説明書  工事に関する特記仕様書  

Copyright © All rights reserved.
Failed to retrieve file