Pizza Cone Machine User Manual
Contents
1. Pizza Cone Machine User Manual Contact Rita Zhao E mail sales03 orangecoltd com Skype sales03 orange Mob 0086 18137251982 1 Power socket 2 Leakage protection device Automatic trip out when leakage 3 Protective tube if Voltage instability it will fusing automatically to protect the motor 2A 4Emergency switch turn right on the power put the button down the machine stops running 5 Power indicator After turning on the power supply it will bright 6 Rising switch of upper mould red color push the button the upper mould can go up to the original place 7 Starting switch green color push the button the upper mould can go down 8 Blow out switch yellow color push the button 2 or 3 times down mold can vent automatically to prevent cone damaged 9 Time controller The factory set the default values is 8 seconds don t have to adjust usually 10 Upper mold temperature controller adjust the temperature of upper mold to 180 C is OK usually Adjuster A left side control the left side of upper mould Adjuster B right side control the right side of upper mould 11 Upper mould temperature indicator light it will light after you adjust the temperature of upper mould when the upper mould reach to the setting temperate the light will put out Indicator light A left side corresponding with regulator with A indicator light B right side corresponding with regulator with B 12 Upper mould Cone inner molding mold after the2. e time the down mould temperature indicator light After the temperature reach to the setting values the indicator put out the down mould start to work u 6 Put the dough to the down mould 60g pc make the dough to cone forming do not touch the mould with hand 7 Push the green button the upper mould goes down automatically 8 When the upper mould and down mould contact completely push the yellow button to release air so that the cone can not break 9 After 8 seconds the upper mould goes up automatically The cone is finished take down the cone by hand is OK
3. temperature of upper mould reaches setting temperatures the upper mould starts to work 13 Down mould temperature controller it can adjust the down mold temperature the temperature is 150 C usually Adjuster A left side control the left side of upper mould Adjuster B right side control the right side of upper mould 14 Down mould temperature indicator after the down mould temperature controller set the temperature it is bright after the upper mould temperature controller reach to the setted temperature the indicator will put out indicator light A left side corresponding regulator with A indicator lightB right side corresponding regulator with A 15 Down mould Cone external forming moulds after the temperature of down mould reaches set temperatures the down mould starts to work 16 Travel switch contact point Can manually adjust the height it can adjust the thickness of cone The operation steps 1 Connect the power supply 3 Turn the Emergency Stop Switch to right the Red power indicator light The host power supply has been through eg if the red power indicator is not light please check whether the protective tube is break or not arotective tube 4 Adjust the upper mould temperature controller to 180 C as same time the upper mould temperature indicator light After the temperature reach to the setting values the upper mould start to work EFI PV a 5 Adjust the down mould temperature controller to 150 C as sam
Download Pdf Manuals
Related Search