CD/DVD Disc Duplicator Controller
Contents
1. SAO and TAO If you are not sure about this feature the default mode is DAO Disc at Once 11 5 Button Beep You can choose whether to hear a beep when you press a button or not 11 6 Skip Read Error This function is to ignore the error setting in the source disc to increase the copying success while backup some special or bad quality source disc 11 7 Eject on Start This is to set the function to eject all disc trays when system power on no matter there is disc in the trays or not 11 8 Clear Setup Reset all of the operations back to manufacturer s default settings IMAGE MANAGER This function will guide you to perform various Hard Drive related operations If your duplicator didn t install HDD the system menu will not show this function Page 7 12 1 Select Image with Optional HDD To select Image file as Sources to be copied to discs 12 2 Disc gt Image To copy Source Disc to HDD and save as Image file 12 3 Reader Speed ONLY when perform 12 2 Disc gt Image function you can set the Reading Speed of reading the master source disc 12 4 Image Info To check image file information and file size 12 5 Rename Image To modify the file name of image file name on the HDD 12 6 Delete Image To delete Image file on the HDD If the file is selected as source file you are not able to delete it unless you go back to 12 1 to re select the image 12 7 HDD Info To check the information in HDD2. Used 2 DVD 3CD Note DVD indicates Free 5 DVD 26cD gt 5GB partition and CD indicate 1GB partition After load 4GB DVD HDD info Used 3 DVD 3CD Free 4 DVD 22CD Page 39 Smart Image File Management 1 When Discs are loaded into HDD as stored disc image The system will assign a file name to the image file beginning from A001 yx Note Each time a new disc image is loaded the system will auto search and assign the lowest number as file name For example if there is not deleted file then file name will be assigned by sequence from A001 AO002 and Axxx However if there is a file deleted such as A003 then the file name will be held When next time there is a new disc image stored then the lowest number of A003 will be assigned as this new disc image s file name 2 You are allowed to delete an image file by executing 12 5 delete image Once you deleted an image file the file name will be left empty and hold for future s new loaded image file The existing file name will not be changed or moved ahead due to the deletion 3 You can check your image file information in function 12 4 Image Info The image information will present the image file name Disc type and file size image info ___ 3875MB DVD disc AQOL DVD 3875MB image file A001 or image info CD disc image with 65 A003 CD 65 28 min 28 sec file A003 Page 40 13 USB Firewire Options Only for Duplicators with USB Firewire
3. td 19 59 CD R Use Atos Page 24 10 6 Drive Info This feature will allow you to check the duplicator s major component information such as manufacturer Writer or Reader model number and version 0 MovelA v to 10 Utility and press A Jyv to 6 Drive Info Utility 6 Drive Info OK Then press The duplicator will assign each drive a number from 1to 8 1 is Reader 2 8 are writers 1 Port8 0 3 38 CD ROM Max 52X Press 10 7 System Info lt to select different Drives This feature provide information of the duplicator including controller model number RAM capacity and Firmware version Setup 7 System Info press ox P727DVD 64MB Ver 1 00 Page 25 10 8 Update BIOS This operation will update your duplicator s software You need to insert manufacturer s certified update CD O Movel to 10 Utility and press OK And select 8 Update BIOS lt Setup 8 Update BIOS insert a correct update CD to any Drive and press OK Upgrade BIOS Waiting Disc Upgrade BIOS Identify Disc The system will automatically start executing firmware update When finished the update CD will automatically eject Start update o K H ct H 5 Q oO Start update Complete In 2 sec the system will re boot The new firmware update is f
4. Pre scan and press OK Utility 1 Prescan Prescan 76 24 Finished Page 22 10 2 Quick Erase This operation will erase your re writable discs in the Writer Tray When finished erasing the tray will automatically eject The duplicator can erase different types of re writable discs simultaneously You can place the re writable disc you would like to erase in any tray of writers Utility 2 Quick Erase insert re writable discs and press OK Quick Erase Disc O O Oo Erasing done and eject discs x Note If you see O o take turns blinking it means Erasing is in processing If you see F f take turns blinking it means DVD RW Disc Formatting is in processing 10 3 Full Erase This operation will completely erase your re writable discs in the Writer Tray It takes longer time than Quick Erase When finished the writer will automatically eject trays Insert re writable disc and press OK Full Erase Disc O 0 Erasing finished and eject discs Page 23 10 4 Eject All Discs Eject all discs including master source disc and all of disc in writer trays Utility 4 Eject All Disc Press OK Eject all discs 10 5 Disc Info This feature will allow you to check disc s basic information such as disc type data length and available capacity Utility 5 Disc Info Place disc and press OK
5. The process is the same as COPY but it won t write anything to the recordable discs Press A v to navigate the function menu to 2 Test 2 Test 79 45 7 discs detected The system will auto detect the numbers of blank disc and start to simulate the process of COPY just press OK to execute However there is no data will be actually written to the blank disc Test 79 45 Loading Disc Test 79 45 Analyze Disc Test 79 45 10 08 00 Finished and Eject discs The purpose of this process is to ensure an error free duplication Page 11 3 COPY amp VERIFY This operation will make copies and after the copies was finished it will continue a Verification process automatically to ensure data correctness Therefore the duplicator will not eject discs when copy was finished until verification was done g Before you start this menu to copy please make sure you have put correct reading source and blank discs Press A vito navigate the function menu to 3 COPY amp VERIFY 3 Copy amp Verify 7 discs detected The system will automatically detect and display how many blank discs were detected When the system is ready to copy just press OKI to execute CD DVD coping When the system starts copying process first it will start Loading Disc analyzing the discs and then start coping During the copying the LCD screen will display Master Source Di
6. This is to make Disc Readability Check This operation will check your master discs and the copied disc s readability to make sure all of your copies are readable Put master source disc and all copied discs into the duplicator Pressi v to navigate the function menu to 5 Verify Press OK then the duplicator will automatically start loading disc analyzing source disc and_ start verification 5 Verify 7 disc detected erify 79 45 Loading Disc erify 79 45 Analyze Disc erify 79 45 45 35 45 When verification was finished the duplicator writer trays will automatically eject Page 14 COMPARE This is to make a bit by bit Comparison between Master Reading Source and all the copied discs inside the writer tray This operation is to ensure all of our copies have the exactly same information as your Master Reading Source Put master source disc and all copied discs into the duplicator 2 PresslAl v to navigate the function menu to 6 Verify Press OK the duplicator will automatically start loading disc analyzing source disc and start Comparison 6 Compare 7 discs detected Compare 79 45 Loading Disc Compare 79 45 Analyze Disc Compare 79 45 45 35 45 when Comparison was finished the duplicator writer trays will automatically eject Note ONLY DATA Disc can conduct such function of Comparison Page 15 7 SELECT SPEED This operation will al
7. be automatically set in HDD If you would like to make Disc to Disc Copies then you have to go back to 8 Select Source to select Disc as your Reading Source Page 32 12 2 Disc gt Image This function will onto the Hard Dri guide you to load your master source disc ve and saved as an image file Place Master Source Disc onto any Drive Select 12 2 Disc gt Image and press OK Image Manager 2 Disc gt Image Press Ox Disc gt A001 10 446MB xx The source disc loaded to HDD as im 100 age file A001 Disc gt A001 Finished Note1 The source disc can be placed in any Reader or xxx Note2 any one of Writer Drive Each time a new disc image is loaded the system will auto search and assign the lowest number as file name For example if there is not deleted file then file name will be assigned by sequence from A001 A002 and Axxx However if there is a file deleted such as A003 then the file name will be held When next time there is a new disc image stored then the lowest number of A003 will be assigned as this new disc image s file name Page 33 12 3 Reader Speed When you would like to perform This function 12 2 Disc gt Image this function will guide you to set the Reading Speed of reading the master source disc Image Manager 3 Reader Speed yNote This function is ONLY available when loading Source Disc to HDD 12 4
8. master source disc before copying to ensure a successful copying Support copying simulation to prevent any failure caused by bad blank disc or source disc Support verification to ensure copied disc s readability Support all major disc types Auto detect source disc Can set button beep sound on or off Easy firmware update Just place an update CD into any drive within few seconds the firmware was easily updated Page 3 LCD Front Panel Control Buttons There are 4 control buttons A w OK Cancel A UP Backward Use this button to navigate backward to search functions you like v Down Forward Use this button to navigate forward to search function you like OK OK Enter Execute the function Cancel Escape Go back to previous function LCD Display The LCD display is a 2x16 Mono LCD screen The system will display function information message and instruction on the LCD Page 4 Menu Overview 1 COPY This is to make CD DVD copy Before you start this menu to copy please make sure you have populated the correct reading source and blank discs The system will automatically detect and display how many blank discs were detected When the system ready it will automatically execute CD DVD duplicating 2 TEST This is to simulate Copying Process Simulation The process is the same as COPY but it won t write anything to the record able disc The purpose of this pro
9. CD DVD Disc Duplicator Controller USERS MANUAL CONTENT Introduction Features Model amp Specification Control Panel Menu Overview Operation Guide 1 Copy N Test 3 Copy amp Verify 4 Copy amp compare 5 Verify 6 7 8 9 1 Compare Disc Burn Speed Select Source Audio Track Edit 0 Utility 10 1 Pre scan 10 2 Quick Erase 10 3 Full Erase 10 4 Eject All Disc 10 5 Disc Info 10 6 Drive Info 10 7 System Info 10 8 Update BIOS 11 Setup 12 11 1 Power On Time 11 2 Auto Start 11 3 Startup Menu 11 4 Write Method 11 5 Button Beep 11 6 Skip Read Error 11 7 Eject on Start 11 8 Clear Setup Image Manager 12 1 Select Image 12 2 Disc to Image 12 3 Reader Speed 12 4 Image Info 12 5 Rename Image 12 6 Delete Image 12 7 HDD Info 12 8 Format HDD 12 9 About HDD Manager 13 USB Fire Options Page 1 INTRODUCTION The duplicator is a stand alone CD DVD Disc Duplicator Controllers maximum support up to 11 CD DVD discs duplicating simultaneously There are total of 11 7 3 independent IDE ports on the controller and each IDE port is independent from each other Therefore the controller can control different CD DVD Devices with different model brand or burning speed to operate at the same time The controller support up to 11 discs duplicating simultaneously at maximum 56x CD writing and 16X DVD writing An easy to use operating control panel includes a LCD screen and 4 push buttons All o
10. Image Info This function allows you to check image file information of Image file number Disc type and its file size Image Manager 4 Image Info Press lox Image Info A001 DVD 4469MB 3875MB DVD disc image file A001 Image Info A001 DVD 3875MB Image info CD disc image with 65 min 28 sec file name A003 Page 34 12 5 Rename Image This function is to modify the file name of image file name on the HDD Image Manager 5 Rename Image Select 12 HDD Manager and press OKI select 5 Rename Image 001 A001 DVD 4469M Select the image file you want to rename and press OK Edit Image Name A007 Key in new file name and press ox Edit Image Name DVD07__ OK Press OK to confirm rename OK Image A007 Page 35 12 6 Delete Image This function allows you to delete image file in HDD If the file has been selected as source file you are not able to delete it unless you go back to 12 1 to re select other image as source Image Manager 5 Delete Image Press lox DELETE Image A001 DVD 4469M Select the image file you would like to AAT wasn press lox to confirm DELETE Image A003 DVD 4372M press lox and execute delet A003 DVD 4372M DELETE Complete 12 7 HDD Info This function allows you to check the information of HDD such as how many discs are st
11. amically Assign Partitions 1 When first time format your built in HDD our duplicator will automatically divide the HDD into number of partitions into 1GB You don t have to predict and select DVD or CD partition in the beginning 2 You can go to check HDD information in function 12 6 HDD Info the Hard Drive s capacity is presented in terms of how many DVD or CD discs you can load For example if your built in HDD is 40GB then the system will show the HDD available capacity Used 0 DVD OCD 40GB 5GB 8 DVD Free 8 DVD 40CD 40GB 1GB 40CD Note DVD is calculated by 5GB and CD is calculated by 1GB Page 38 3 Every time you load a source disc the duplicator will auto detect the disc capacity and assign correct partitions for it For example if you loaded a 4GB single layer DVD disc into HDD as a disc image system will automatically detect and assign 4 partitions for it 4 Dynamic calculate and display HDD capacity The duplicator will present your built in HDD capacity information dynamically depending on each time your loaded source disc s capacity For example before your load a 4GB DVD disc as source disc image your HDD information shows your HDD capacity is available for loading 5 DVD or 26 CDs However after loading a 4GB DVD the system will re calculate the total available partitions and show you how many DVD or CD discs that you can load as disc image next time Before load 4GB DVD HDD info
12. cess is to ensure an error free duplication 3 COPY amp VERIFY This operation will make copies and after the copy process has been finished it will continue a Verification process automatically check the copied disc to ensure data correctness 4 COPY amp COMPARE This operation will make copies and after copy process has been finished it will continue a Comparison process automatically to ensure data correctness 5 VERIFY This is to make Disc Readability Check This operation will check your master discs and the copied disc s readability to make sure all of your copies are readable 6 COMPARE DISC This is to make a bit by bit Comparison between Master Reading Source and all the copied discs inside the writer tray This operation is to ensure all of our copies have the exactly same information as your Master Reading Source Page 5 7 SET BURN SPEED This operation will allow you to adjust and select Duplication Speed SELECT SOURCE To set the Master Reading Source as Optical Drive or Hard Drive Disk AUDIO TRACK EDIT This will help you to select and combine audio tracks from various CDs into a single customized audio CD UTILITY 10 1 Pre scan This feature will help to check whether the Master Source Disc can be correctly duplicated 10 2 Quick Erase This operation will erase your re writable discs in the Writer Tray 10 3 Full Erase This operation will completely erase your re writable discs in the Wr
13. connectors On the back of the Duplicator there is a USB 2 0 Firewire Connector This slot lets you connect the bottom drive of the Duplicator to your PC Items Needed 1 One open USB 2 0 Firewire slot on your PC 2 One USB Firewire cable not Supplied with unit 3 One Duplicator with USB Firewire Using the USB Connection Have your PC on and booted up ready to go Have the Duplicator plugged into the wall and the USB switch on the back of the machine switched to ON Turn on the Duplicator On your computer you should soon see a pop up message saying New Device Detected If you open up My Computer on your PC you should now see a new DVD drive there You can now use this drive as an external CD DVD computer drive to read or burn images When You are done using this drive and ready to duplicate Turn the USB switch back to Off and restart the Duplicator Page 4
14. his function will guide you to perform various Hard Drive related operations If your duplicator didn t install HDD the system menu will not show this function Please refer to 12 8 ABOUT HDD MANAGER to get more information about the special function and advantages about this feature 12 1 Select Image This function will guide you to select Image file as Sources to be copied to discs This function is required when you would like to make copy from HDD to Disc Please refer to 12 1 1 for how to make Hard Drive to Disc Copies MovelA to 12 HDD Manager and press OKI And select 1 Select Image Image Manager 1 Select Image Press OK Select Image A001 DVD 4469M move A y to select and press OK to confirm Page 31 12 1 1 Make Hard Drive to Disc Copies Make sure Master Reading Source is set to Hard Drive Once you have done _12 1 Select Image the Reading Source will automatically set in HDD to select 1 lt Go back to main menu and move A Copy Please insert blank discs into writer trays If there is a disc in the Reader tray it will be ignored Press OK to start copying If you already executed 11 2 Auto Start then when all writer trays are fulfilled with blank disc the system will auto start copying When finished the tray will automatically eject Note Once you have select HDD Image the Reading Source will
15. inished New BIOS updated 7 n es w 5 iat nN K n n o 3 Eject CD and re boot system Page 26 11 SETUP This function group provides 8 features allow changing manufacturer s default setting 11 1 Power On Time You can set the system warm up time from 5 sec to 255 sec after system power on Select 11 Set Up and press OK Setup 1 Power On Time Select 1 Power On Time and press OK Press A to select seconds J Power On Delay 15 seconds Page 27 11 2 Auto Start This operation will allow the duplicator to automatically execute copying once your master source disc and all of writer trays are fulfilled with recordable discs You can set Off to disable auto start or set On with seconds 1 99 to activate this feature To execute this function you have to select and set operation mode of COPY TEST VERIFY COPMARE COPY amp VERIFY COPY amp COMPARE for auto start copying Setup 2 Auto Start Press OK Auto Start 3 seconds PresslA V to set seconds Note If you set Off then LCD screen will not show how many blank discs are detected in writer trays 11 3 Startup Menu 3 1 1 You can select which function in the menu to see first when you turned on the duplicator The default setting is COPY Setup 3 Startup Menu Press OK Startup Menu 1 Copy Disc Move A V
16. iter Tray It takes longer time than Quick Erase 10 4 Eject All Disc Eject all discs including master source disc and all of disc in writer tray 10 5 Disc Info This feature will allow you to check disc s basic information such as disc type data length and available space 10 6 Drive Info This feature will allow you to check the duplicator s major component information such as manufacturer Device s model number and version 10 7 System Info This feature provides information of the duplicator including Controller model number Buffer memory capacity and Firmware version 10 8 Update BIOS This operation will update your duplicator s software You need to insert manufacturer s certified update CD Page 6 11 12 SETUP 11 1 Power On Time You can set the system warm up time from 5 sec to 255 sec after system power on 11 2 Auto Start This operation will allow the duplicator to automatically execute copying once your master source disc and all of writer trays are fulfilled with recordable discs You can set off or seconds 1 99 to activate this feature You have to select and set which operation mode of COPY TEST VERIFY COPMARE COPY amp VERIFY COPY amp COMPARE to execute Auto Start 11 3 Startup Menu You can select which function in the menu to shown first when you turned on the duplicator The Default startup menu is COPY 11 4 Write Method You can select which mode to duplicate CD among DAO
17. low you to adjust and select Duplication Speed on three different disc types of CD Audio CD and DVD movel v to navigate to function 7 SELECT SPEED and press OK Oo 7 Set Burn Speed You will see three disc types of CD Audio CD and DVD Move A y to selected disc type and press OK to confirm your selection CD 52 Audio CD ew lt iw 8 Press x Vto Burn Speed Burn Speed Burn Speed 40 select burning speed Note This is only available on DVD Duplicato r Page 16 8 SELECT SOURCE This function is to set the Master Reading Source as Optical Drive or Hard Drive Disk Move M Nio navigate to function 8 _Select Source and press OK 8 Select Source Press Al v to select HDD or Optical Drive with assigned number as Reading Source Source Drive gt HDD ST380021A Move A v to select Source Drive gt D 1 DVD ROM Press OK to finished setting gt Note If HDD was selected as Source then please follow 12 1 Select Image s instruction to continue to select image file as reading source zx Note Each Optical Drive will be assigned a Drive based on their sequence from top to bottom If there is no HDD installed then Drive 1 is set as READER Page 17 9 AUDIO TRACK EDIT This pr
18. ocess will guide you to select audio tracks from various audio CDs and combine them into one customized Audio CD 9 1 Select and Copy Track Move to 9 Audio Track Edit and press OK Then select 1 Copy Track e 9 Track Edit Track Edit 1 Copy Track Insert an Audio CD with your favorite tacks in the Reading drive and Insert ONLY ONE Blank CD R disc into one of the writers Note insert only one blank CD R As soon as both audio CD and blank CD R are recognized you will see the message of ready to press OK on duplicator LCD screen then press OK to start operation O Navigate to the track number which you would like to select and then press OK to confirm your selection Continue our selection with the same activity You shall see a letter of a b c d shown on top of each selected track ab C 2 3 gt As 5 6 7 Page 18 Once you finished selecting the tracks you want to copy you can press vJ to move cursor to the end of the OK display And press OK to confirm and submit your selection cd e 7 8 9 10 OK Press OK to start burning Once your submit your selection you shall see Copying Audio Tracks on your LCD screen Track O1 04 39 COP Yas dees 00 04 When copying was finished the LCD will show CD R s usage and free space Track Used 59 15 15Free 20 42 You can repeat above step 1 6 to select Audio track from other so
19. ored and available space of HDD Image Manager 6 HDD Info Press OK Used OCD 7DVD Free 41CD 8DVD Page 36 12 8 Format HDD This feature will allow you to format the HDD However you will not be able to format the HDD if the HDD image was selected as Reading Source You should go to 8 Select Source to select Optical Drive as Reading Source then you shall be able to format HDD Image Manager 7 Format HDD ox Caution Format HDD tu 6 0 n n press lox to confirm format Format HDD Confirm Again press OK to confirm and start executing Format HDD Complete Page 37 12 9 ABOUT HDD MANAGER Our duplicator has a highly intelligent and dynamic HDD management technology Unlike traditional method of formatting HDD in which the number of partition is determined by dividing your Hard Drive s total capacity by 5GB for DVD or 1GB for CD In this way you have to decide how many partitions for DVD or CD before you start format your Hard Drive However sometime you are not able to predict how many DVD or CD that you are going to load into the Hard Drive And potentially you will create many incomplete partitions Especially when there is more and more different DVD discs coming out such as double layer DVD you need a smarter and more dynamic way to manage your HDD Our Dynamic HDD Manager has following special features O Auto Detect Disc Capacity and Dyn
20. perating message and information including function list instructions operating status or error message will real time display on the screen Users can easily read and follow the instructions to complete their jobs even without user manual OPTIONAL HARD DRIVE will allow users to load many CD DVD Master Source Discs into the HDD as source disc image Loading disc image into HDD will reduce the risk of damaging Source Disc due to heaving duplicating jobs An intelligent and dynamic HDD management system will dynamically assign HDD partitions to each CD DVD disc image loading according to their actual capacity requirement This smart HDD manager will ensure a more flexible and efficient HDD management NOTE Content stored on the Hard Drive will be referred to as IMAGE Page 2 Vv Vv V WV Vv Vv Y V WV FEATURES Up to 11 Ports IDE to IDE CD DVD Disc Duplicating Controller Auto detecting IDE devices as soon as system power on 2x16 LCD display and 4 control buttons Support up to max 56x CD duplication 16xDVD duplication Flexibility in setting different duplication speed based on various Disc condition Support IDE Hard Drive Device Loading master source CD or DVD discs into Hard Drive as disc image Easy to copy the stored disc image into numbers of blank discs Support Audio Track editing Easy to combine your favorite audio tracks from different sources into one customized CD Special Pre Scan can evaluate the
21. sc s data size and copying progress Copy amp Verify Loading Disc Copy amp Verify Analyze Disc Copy 79 45 10 08 00 When copying finished the system will automatically continue to verify to make disc Readability check erify 9 45 45 35 45 m 100 finished and Eject discs Page 12 4 COPY amp COMPARE This operation will make copies and after copy process has been finished it will continue a Comparison process automatically to ensure data correctness Therefore the duplicator will not eject discs until discs Comparison was done correctly Before you start this menu to copy please make sure you have put correct reading source and blank discs PressjAJ to navigate the function menu to 4 COPY amp COMPARE 4 Copy amp Compare 7 discs detected When the system is ready to copy just place OK to execute CD DVD copies lt When the system starts copying process first it will start Loading Disc and analyzing the discs and then start copies During the copying the LCD screen will display Master Source Disc s data size and copying progress Copy amp Compare Loading Disc Copy 79 45 10 08 00 When copying finished the system will automatically continue Comparison process to ensure the discs have copied exactly the same as source disc Compare 79 45 45 35 45 When the Comparison was finished the Writer Trays will automatically eject Page 13 VERIFY
22. such as how many discs are stored and HDD available space 12 8 Format HDD This feature will allow you to format the HDD However you will not be able to format the HDD if the HDD image was selected as source Page 8 Operation Guide 1 COPY This operation will guide you to copy Master Reading Source to Blank CD DVD disc Please ensure that Master Reading Source is set to the READER if you would like to make Disc to Disc copies Turn on the duplicator before you start this menu to copy please make sure you have put correct reading source and blank discs The system will automatically detect and display how many blank discs were detected Press A v to navigate the function menu to 1 COPY and press OK to execute CD DVD copies 1 Copy 79 45 7 discs detected When the system starts copying process first it will start Loading Disc analyzing the discs and then start coping During the copying the LCD screen will display Master Source Disc s data size and copying progress Copy 79 45 Loading Disc Copy 79 45 Analyze Disc Copy 79 45 10 08 00 When the coping is finished the Writer Trays will automatically eject xvx Note If your duplicator has HDD installed and if you would like to make Hard Drive to Disc copies please refer to function 12 Image Manger for more information Page 10 TEST This function is to perform Copying Process Simulation
23. to select function Page 28 11 4 Write Method You can select which mode to duplicate CD among DAO SAO and TAO The default mode is DAO Disc at Once Unless you understand completely what they mean we strongly suggest you to set it as Disc at Once Setup 4 Write Method Press Write Method DAO move A iv to select 11 5 Button Beep You can choose whether to hear a beep when you press a button or not Setup 5 Button Beep Press OK Button Beep ON Move JA v to select ON OFF 11 6 Skip Read Error This function is to ignore the error setting in the source disc to increase the copying success while backup some special or bad quality source disc Skip Read Error gt Yes Setup 6 Skip ReadError Press A lt to select Yes No Page 29 11 7 Eject On Start This is to set the function to eject all disc trays when system power on no matter there is disc in the trays or not Setup 7 Eject On Start 7 Eject On Start gt Eject All Move A ivi to select function Eject All No Eject Eject Target Eject Source 11 8 Clear All Reset all of the operations back to manufacturer s default Setup 6 Clear Setup Press OK clear all setting you have done and return back to manufacturer s default setting Page 30 12 IMAGE MANAGER For Duplicator with HDD Installed T
24. urce discs and copy to the same blank disc xvx Note Once you finished 9 1 copy Audio Track you NEED to perform 9 2 Close Disc on this CD otherwise your audio CD will NOT be able to play on CD player Page 19 9 2 Close Disc This process is to make a CD R CD RW disc has copied tracks become a playable Audio CD O MovelAl v to 9 Audio Track Edit and press OKI 9 Track Edit Move to select 2 Close Disc and press OK to start close disc process Track Edit 2 Close Disc When Close Disc is processing you will see message on the LCD show Finalizing Disc When the process is done writer will automatically eject the disc and you will see finished on the LCD Finished Close finished and eject disc Page 20 9 3 Disc Info This feature allows you to check your disc status such as available capacity MovelA v to 9 Audio Track Edit and press OKI 9 Track Edit Select 3 Disc Info and press OK Track Edit 3 Disce Info 1 79 59 CD R Use 21393 Page 21 10 UTILITY This function group includes several Disc related functions You can press OK and move A y to select function you want 10 1 Pre scan This feature will help to check whether your Master Source Disc can be correctly duplicated O Select Utility and press OK Select 1
Download Pdf Manuals
Related Search