MHTL-MAGNT8 Linear Pendant User Manual
Contents
1. MHTL MAGNTS8 4FT INSTALLATION INSTRUCTION IN 8FT LINEAR PENDANT Rev Date 1 20 2014 WARNING Risk of fire or electric shock When drilling check for enclosed wiring and other pre existing components Drilling to install the LED retrofit kit may damage wiring and other electrical components WARNING Risk of fire or electric shock Installation of the LED Retrofit Kit requires knowledge of electrical systems If not qualified do not attempt installation and contact a qualified electrician WARNING Risk of fire or electric shock Install this kit only in luminaires that have the construction features and dimensions shown in the photographs and or drawings WARNING Risk of fire or electric shock To prevent wiring damage or abrasion do not expose wiring to the edges of sheet metal or sharp objects Only those holes indicated in the photographs and or drawings below may be made or altered during this installation Do not leave any open holes in the enclosure MHTL MAGNTS8 4FT Suitable for field installation in any open lens 8ft linear pendant fluorescent luminaire with nominal overall dimensions 96 in 2439 mm long by 6 in 153 mm wide with or without a reflector Phone 718 524 4370 Fax 718 524 4390 www ihtlighting com MHTL MAGNTS8 4FT INSTALLATION INSTRUCTION IN 8FT LINEAR PENDANT Rev Date 1 20 2014 Note This information is subject to change without notice 1 Main Data Input Max Input me ae Po2. tter Wire Stripper 6 Installation Procedures Shut OFF Circuit Breaker before Starting Remove the Existing Fluorescent Ballast and Install the LED Two Way Ballast LED Driver should be located near the center of the fixture Connect the Power Source to LED Driver s Input Phone 718 524 4370 Fax 718 524 4390 www mhtlighting com MHTL MAGNTS8 4FT INSTALLATION INSTRUCTION IN 8FT LINEAR PENDANT Rev Date 1 20 2014 Reinstall the Cover and leave the LED Driver s Output Leads Accessible from the Center Connect Driver to LED Tubes using the Quick Connectors Phone 718 524 4370 Fax 718 524 4390 www mhtlighting com eee es ao MATL MAGNTS8 4FT INSTALLATION INSTRUCTION IN 8FT LINEAR PENDANT Rev Date 1 20 2014 Phone 718 524 4370 Fax 718 524 4390 www mhtlighting com
3. wer Current LED Driver Model pea mre W A MHTL eae AFT 120 277Vac 2x18W LUC 042D070DSM SSM 700mA MHTL MAGNTS8 4FT 50Hz 60Hz 2x21W LUC 042D070DSM SSM 2 Wiring Diagrams MHTL MAGNTS8 4FT Series Wiring Diagram Live Black Quick Connects 4ft LED Magnetic Tube Dual Output LED Driver Output LED Driver Neutral White 3 Installation and Maintenance Instruction 3 1 This product is to be installed and serviced by a certified electrician 3 2 The Luminaire should be installed in an area with good ventilation clear of any corrosive or combustible gases and explosive objects 3 3 A supply voltage tolerance of 10 is allowable An improper installation outside of this range or with the incorrect input voltage will influence the normal operation of this luminaire and result in damage to the lamp and electronic ballast 3 4 The luminaire must be properly grounded to prevent accidental electrical shocks and to prevent interference from the electrical ballast affecting the normal operation of the luminaire 3 5 Do not open the housing with the luminaire powered on 4 Replacement Kit Parts List 2x 4ft Magnetic LED Tube 1x Two Way LED Driver 4x Self Drilling Screws 5 Required Tools Phone 718 524 4370 Fax 718 524 4390 www ihtlighting com TEE MHTL MAGNT8 4FT INSTALLATION INSTRUCTION IN 8FT LINEAR PENDANT Rev Date 1 20 2014 Electric Drill with 2 Phillips Bit Wire Cu
Download Pdf Manuals
Related Search