PZL-1&PZS-1 PZL-1
Contents
1. Joint cable JC 8 1 i Only for PZL 1 amp PZS 1 model Make sure that all of the above items are with the instrument when purchased Nomenclature and Functions PZL 1 Laser emitting window Beam aperture Rotary head Handle Serial port Control panel Instrument height mark Battery holder Battery compartment lock Control Panel Battery power remaining lamp Power lamp Power switch Channel selecting lamp The channel 4 is not used now Channel selecting key Manual mode lamp Plumb beam key Manual mode key PZL 1 PZL1 W FA FHA Standard model Bluetooth built in Bluetooth model communication lamp l The lamp functions oniv for Remote Control Option Bluetooth built in model There are two PZL 1 models standard and Bluetooth built in Bluetooth built in models are designated by the letter W fol lowing the model name on the serial number tag as shown above 10 Key or Lamp Function Battery power remaining lamp Indicates the amount of battery power remaining That lamp will automatically go off after approximately a minute It will go back on if any key is pressed Channel selecting lamp Indicates the selected channel Manual mode lamp Lights up when the manual mode is in use Manual mode key When pressed twice initiates the manual mode When pressed2. 2 TOPCON INSTRUCTION MANUAL LAZER ZONE PZL 1 amp PZS 1 PZL 1 Foreword Thank you for purchasing the Topcon PZL 1 amp PZS 1 To quickly and effectively use the PZL 1 amp PZS 1 please read these brief instructions carefuly and keep them in a convenient location for future refer ence PZS 1 For measuring with these instruments see the instruction manual for This instruction manual explains the basic operation of the PZL 1 and the E the controller Handling Precautions Before starting work or operation be sure to check that the system is functioning properly 1 Vibration and impact protection When transporting the instrument provide protection to minimize risk of severe vibration or impact Severe vibration or impacts may affect beam accuracy 2 Checking battery power Before operating check remaining battery life 3 Storing the instrument for long period When storing the instrument for long period remove the batteries Safety Information In order to encourage the safe use of products to prevent damage to properties and to prevent any danger to the operator and to others important warnings are placed on the prod ucts and inserted in the instruction manuals We suggest that everyone understand the meaning of the following displays and icons before reading the Safety Cautions and text Ignoring or disregard of this display may lead to death or serious WARNING ey j M j l a Igno
3. For other operations and for setting the instrument constant see the instruction manual for the controller Using Plumb Beam You can set the instrument using with the plumb beam for centering Press the plumb beam key to emit the plumb beam The plumb beam is equipped with an auto cut off function When the instrument performs auto leveling the plumb beam blinks Set up the instrument when the beam is emitted Plumb beam 14 Height Alert Function When auto leveling and height alert function are active this function prevents the instrument from operating if it is disturbed This helps insures accurate control If the height or inclination of the instrument changes the height of instrument should be verified and re established if necessary The height alert function will become active about 10 minutes after power is turned on Then all lamps of the panel blink To Activate the Height Alert Function While pressing the MANU key turn on the power ob All the lamps will blink for 3 seconds and the height a oS alert function will be turned on PES CHANNEL Turn the power key off and on again the height alert E function will be turned off oe ia 5 A About Channels Bv setting channels up to four PZL 1s can be used at the same time 15 Checking and Adjusting Switching to Adjustment Mode While pressing the plumb beam key turn on the power l N The channel selecting lamps will light up in order from
4. once in the manual mode cancels the manual mode Bluetooth communication lamp Blinks during communication with Bluetooth The lamp functions only for Bluetooth built in model Power lamp Blinks during auto leveling and lights up steadily when auto leveling ends Power switch Turns on the power When pressed for 2 seconds or more turns off the power Channel selecting key The channel can be changed by pressing the channel selecting key within 5 seconds after the power goes on while the channel lamp is blinking The channels change in order 1 gt 2 gt 3 gt 1 Each time the channel selecting key is pressed the operable time of the keys is extended by 5 seconds The selected channel is set 5 seconds after the channel selecting key is re leased Plumb beam key This button switches the plumb beam on and off That beam will automatically go off after five minutes 11 Preparation for Use Battery Installation For battery placement or replacement instructions see Battery section page 18 Instrument Set up Procedure 1 Set the instrument on any smooth surface that is within 3 of true level The PZL 1 auto level sys tem will not function if the unit is placed more that 3 out of level For best operation it is recom mended that it be mounted to a tripod Leveling range 12 Battery Power Remaining Lamp The battery power remaining lamp will be shown for severa
5. 1 200 to 4 and the instrument will switch to the adjustment one 0 mode Use the controller when inspecting or adjusting the instru ment For details see the controller s instruction manual ki ibration time out error has occurred See P22 Error Code Ma If the adjustment mode doesn t end after approximately 30 minutess a cal Storage Precautions Always clean the instrument after use Use a clean cloth moistened with a neutral detergent or water Never use an abrasive cleaner ether thinner benzene or other solvents Always make sure instrument is completely dry before storing Dry any moisture with a soft clean cloth 16 Standard Optional Accessories Laser Zone Beam Receiving Sensor PZS 1 Fixing screw Control panel Serial port 5 8 inch plug Exclusive for PZS 1 Detective window Control panel Battery cover knob Power lamp Battery cover OPOWER A ee Power switch at To turn off press for more than two seconds o CHANNEL Battery error lamp o Blinking The power is low but PZS 1 is still usable e Red ON Dead batteries Recharge the battery ie ee i Screw 5 8 inch Channel indicator lamp For the measuring method see the instruction manual for the controller 17 Battery Battery BT 62Q Battery charger BC 30 For Charging 1 Install the battery on the BC 30 2 Plug the power cord in an outlet AC 120V or 230V Charging is completed aft
6. 777 Fax 02 9647 2926 www topcon com au TOPCON EUROPE B V TOPCON INSTRUMENTS THAILAND CO LTD Essebaan 11 2908 LJ Capelle a d IJssel The Netherlands 77 162 Sinn Sathorn Tower 37th FI Phone 010 4585077 Fax 010 4585045 www topconeurope com Krungdhonburi Rd Klongtonsai Klongsarn Bangkok 10600 Thailand IRELAND OFFICE Phone 02 440 1152 7 Fax 02 440 1158 Unit 69 Western Parkway Business Center Lower Ballymount Road Dublin 12 Lreland TOPCON INSTRUMENTS MALAYSIA SDN BHD Phone 01460 0021 Fax 01460 0129 a perizji sine a tA TUNES Ampang Putra aman Ampang Hilir uala Lumpur TOPCON DEUTSCHLAND G m b H Phone 03 42701068 Fax 03 42704508 iesserallee 31 illich Phone 02154 885 100 Fax 02154 885 111 info Otopcon de TOPCON KOREA CORPORATION www topcon de 2F Yooseoung Bldg 1595 3 Seocho Dong Seocho gu Seoul 137 876 Korea Phone 82 2 2055 0321 Fax 82 2 2055 0319 www topcon co kr TOPCON S A R L she de Paris 92585 Clichy Cedex France TOPCON OPTICAL H K LIMITED Phone 33 1 41069490 Fax 33 1 47390251 topcon topcon fr 2 F Meeco Industrial Bldg No 53 55 Au Pui Wan Street Fo Tan Road de Shatin N T Hong Kong TOPCON ESPA A S A Phone 2690 1328 Fax 2690 2221 www topcon com hk Frederic Mompou 5 ED Euro 3 08960 Sant Just Desvern Barcelona Spain TOPCON CORPORATION BEIJING OFFICE Phone 93 473 4057 Fax 93 473 3932 www topconesp com Room 8A Poly Plaza Building 14 Dongzhimen Nandajie TOPCON SCANDINAVIA A B D
7. PUT CLASSILASER PRODUCT Beam aperture y Rotating laser Class 1 I Invisib le laser Visible laser Plumb beam Class 2 II Visible laser Contents Foreword Handling Precautions Safety Information Safety Cautions USO siisii Exceptions from Responsibility Laser Safety Labels Contents Standard System Components Nomenclature and Functions Preparation for Use atterv Installation 12 Instrument Set up Procedure Battery Power Remaining Lamp Turning Auto leveling Off pee Operation Using Plumb Beam Height Alert Function To Activate the Height Alert Function es About Channels mm 2215 Checking and Adjusting Switching to Adjustment Mode ne Storage Precautions 16 Standard Optional Accessories Laser Zone Beam Receiving Sensor PZS 1 Battery id nia se andi alicia Batterv BT 62Q Batterv charger BC 30 Battery Holder DB 63C Rechargeable Batterv Pack BT 63Q AC DC Converter AD 9B 7C Error Code Specifications Standard System Components The numerical value in parentheses shows the quantity AD 7C 9B 1 Only for PZL 1 amp PZS 1 model Battery BT 63Q 1 Instruction manual 1 BC 30 1 BT 62Q 1 Only for PZL 18PZS 1 model Shoulder belt 2 5 8 inch plug 1 S Only for PZL 1 amp PZS 1 model
8. e See p 13 Battery power error Recharge the battery or replace the dry batteries with new ones There are 3 types of error indi Calibration range error Reinspect and adjust the instrument cations Manual mode channel 1 Manual mode channel 2 Manual mode channel 1 2 Lamp Channel 1 and Channel 3 Calibration time out error Turn the power off and on blink simultaneously Lamp Channel 3 and Channel 4 Memory error Turn the power off and on blink simultaneously Alllamp Channels blink Head rotation error Turn the power off and on Lamp Channel 2 and Channel 3 Tilt unit error Turn the power off and on blink simultaneously 22 Lamp position Battery power remaining lamp Channel selecting lamp Manual mode lamp Bluetooth communication lamp Power lamp 23 Specifications PZL 1 Zone Width Zone Radius Laser Zone Accuracy Auto leveling range Rotation speeds Laser Class Light source Channels Plumb beam Serial port Power supply Continuous operating time at 20 C 68 F Protection against water Operating temperature Dimensions Weight Bluetooth Unit Bluetooth Standard Bluetooth profiles BD Address Bluetooth Transmitting Bluetooth Communication distance 24 10 5 30m 5m 30 300m 300m 985ft Vertical 1 arc second resolution 3 600rpm Class 2 L D Laser Class Class 1 I Invisib
9. e life of the battery and should be avoided if possible 3 The battery source will discharge when stored and should be checked before using with instrument 4 Be sure to charge a stored battery source every 15 days and store in a place at 30 C 86 F and below when it will not used for a long period If you allow the battery to be completely discharged it will have an effect on the overall performance for proper charging in the future 5 The charger may develop heat while charging there is no problem of it 6 If charging is done at high temperature charging time of the battery may take longer Dry Batteries Replacing Dry Batteries 1 Remove the battery cover by turning the battery com partment lock to OPEN 2 Remove the old batteries and replace with four 4 new D cell alkaline batteries making sure each is placed in the proper direction as indicated 3 Replace the battery cover and turn the knob to Lock 21 Error Code Use the table below to determine operation errors indicated by blinking lamps on the con trol panel If corrective action listed does not correct error please contact your localTopcon dealer Lamp Indication Error Corrective Action All lamps blink Height alert error Set up the instrument again turn the power off and on Power lamp Auto leveling range error Set up the instrument again gt Manual mode lamp Battery power remaining lamp Lamps light up in sequenc
10. er approxi mately 3 hours CHARGE lamp BT 62Q POWER lamp BC The POWER lamp of BC 30 Red ON Power is on The CHARGE lamp of BC 30 will indicate charging status On Solid Wait for charging Red ON Charging On Solid Charging completed Red Flashing Charging error 18 Battery Holder DB 63C Rechargeable Battery Pack BT 63Q AC DC Converter AD 9B 7C For Charging 1 Plug the AC DC converter AD 9B 7C into the DB 63C battery holder 2 Insert the converter power cord in an outlet AD 9B is for AC120V AD 7C is for AC230V 3 Complete charging by unplugging the con verter connector from the DB 63C battery holder after approximately 9 hours 4 Unplug the converter power cord from the out let AC DC converter AD 9B 7C The lamp of DB 63C will indicate charging status Red ON Charging Green ON Charging completed Green flashing DB 63C is not connected to BT 63Q Red flashing BT 63Q protection feature is working automatically PZL 1 can be used in this state 19 20 Automatic protection feature In case of overcharge or high or low temperature state exceeding charging range charging will be stopped or changed to protect battery Note DB 63C can be used with dry batteries instead of BT 63Q Note for charging 1 Recharging should take place in a room with an ambient temperature range of 10 C to 40 C 50 F to 104 F 2 Exceeding the specified charging time may shorten th
11. l minutes when the instrument is powered on or when the battery level changes The battery power remaining lamp will be shown again when any key is pressed 4 Continuous Battery is sufficient Om ma mm Blinking The power is low but laser is still usable ri Blinking continues until batteries are dead O E Blinking order Dead batteries Recharge the battery or replace the dry batteries with new ones The laser will turn completely off after blinking for about five minutes NOTE Even if an AC DC converter is connected at this time blinking still continues Once the power is turned off the battery remaining display will reset Turning Auto leveling Off To turn off the auto leveling function manual mode press the manual mode key twice in quick succession The manual mode light will illuminate The instrument can be positioned in any direction the laser beam remains on and the head will rotate IMPORTANT In manual mode the laser beam will not shut off if disturbed To return to Auto leveling mode press the manual mode key once 13 Operation 1 Set up the instrument on a flat surface or a tripod At this time the instrument will perform auto leveling in a range of 3 2 Turn on the power then select a channel with the channel selecting key Press the channel selecting key within 5 seconds after the power goes on After auto leveling ends the head will rotate and the laser will go on
12. le laser 3 Yes Laser Class Class 2 II Visible laser RS 232C Ni MH with runcharge or 4D CELL dry batteries Approx 15 hours With Ni MH batteries Approx 20 hours With alkaline batteries IPX6 Based on the standard IEC60529 20 C to 50 C 4 F to 122 F Approx 186 W x 201 D x 282 H mm Approx 7 32 W x 7 91 D x 11 1 H in Approx 2 9kg 20 lbs Without battery Bluetooth Specification v1 1 Generic Access Profile Service Discovery Application Profile Serial Port Profile IEEE std 802 48bit LAN MAC Address Output Class2 About 5m The range will be different by a condition PZS 1 Detective angle Horizontal Vertical Serial port Power supply Continuous operating time at 20 C 68 F Tripod screw Operating temperature Protection against water Dimensions Weight BC 30 Input voltage Recharging time at 20 C 68 F Operating temperature 10 10 RS 232C BT 62Q Approx 8 hours 5 8 inch x 11Thred 20 C to 50 C 4 F to 122 F IPX6 Based on the standard IEC60529 Approx 170 W x 86 D x 144 H mm Approx 6 69 W x 3 38 D x 5 67 H in Approx 1 kg 2 2 lbs With battery AC 120V or 230V Approx 3 hours HOC to 40 C 50F to 104 25 Regulatory Information U S A This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reaso
13. nable protection against harmful interference when the equipment is used in a commercial or residential environment This equip ment generates uses and can radiate radio frequency energy and if not used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment is subject to the following two con ditions 1 The device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation 3 Bluetooth Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG Inc USA and licensed to Topcon Corporation EMC NOTICE In industrial locations or in proximity to industrial power installations this instrument might be affected by electromagnetic noise Under such conditions please test the instrument performance before use N 13813 TOPCON POSITIONING SYSTEMS INC TOPCON SOUTH ASIA PTE LTD 5758 West Las Positas Blvd Pleasanton CA 94588 U S A Blk 192 Pandan Loop 07 01 Pantech Industrial Complex Singapore 128381 Phone 925 460 1300 Fax 925 460 1315 www topcon com Phone 62780222 Fax 62733540 www topcon com sg TOPCON CALIFORNIA TOPCON AUSTRALIA PTY LTD 3380 Industrial Blvd Suite 105 West Sacramento CA 95691 U S A Unit 18 4 Avenue of Americas Newington NSW 2127 Australia Phone 916 374 8575 Fax 916 374 8329 Phone 02 8748 8
14. nufacturer or its representatives assumes no responsibility for any damage or loss of profits due to a change of data loss of data an interruption of business etc caused by using the product or an unusable product 5 The manufacturer or its representatives assumes no responsibility for any damage or loss of profits caused by usage other than those usages explained in the user manual 6 The manufacturer or its representatives assumes no responsibility for damage caused by wrong movement or action due to connecting with other products Laser Safety This product projects a visible laser beam during operation This productis manufactured and sold in accordance with Performance Standards for Light Emitting Products FDA BRH 21 CFR 1040 or Radiation Safety of Laser Products Equipment Classification Require ments and User s Guide IEC Publication 60825 1 provided on the safety standards for laser beam As per the said standard PZL 1 rotating laser is classified as Class 1 I Laser Products and PZL 1 plumb beam is classified as Class 2 Il Laser Products In case of any failure do not disassemble the instrument Contact TOPCON or your TOPCON dealer Labels Beam aperture Invisible laser AVOID EXPOSURE rv LASER LIGHT IS EMITTED FROM THIS APERTURE DIODE LASER CAUTION LASER RADIATION DO NOT STARE INTO BEAM WAVE LENGTH 630 685nm 1mW MAXIMUM OUT
15. ongcheng District Beijing 100027 China Neongatan 2 S 43151 M lndal SWEDEN Phone 10 6501 4191 2 Fax 10 6501 4190 Phone 031 7109200 Fax 031 7109249 TOPCON CORPORATION BEIRUT OFFICE TOPCON GREATBRITAIN LTD eae Topcon House Kennet Side Bone Lane Newbury Berkshire RG14 5PX U K one me jii a Phone 44 1635 551120 Fax 44 1635 551170 TOPCON CORPORATION DUBAI OFFICE survey sales topcon co uk laser sales topcon co uk C O Atlas Medical FZCO P O Box 54304 C 25 Dubai Airport Free Zone UAE Phone 971 4 2995900 Fax 971 4 2995901 TOPCON CORPORATION 75 1 Hasunuma cho Itabashi ku Tokyo 174 8580 Japan Phone 3 3558 2520 Fax 3 3960 4214 www topcon co jp PZL 1 amp PZS 1 31360 90080 W
16. ring or disregard of this displav mav lead to personal injurv or NCAUTION phvsical damage to the instrument Injurv refers to hurt burn electric shock etc Phvsical damage refers to damage to equipment and structure or furnishings Safety Cautions AN WARNING e There is a risk of fire electric shock or physical harm if you attempt to disassem ble or repair the instrument yourself This is to be carried out by TOPCON or an authorized dealer only e Laser beam can be dangerous and can cause eye injury if used incorrectly Never attempt to repair the instrument yourself e Cause eye injury or blindness Do not stare into beam Do not stare into beam or view directly with optical instruments e Risk of fire or electric shock Do not use a wet battery e May ignite explosively Never use an instrument near flammable gas or liquid matter and do not use in a coal mine Battery can cause explosion or injury Do not dispose in fire or heat e The short circuit of a battery can cause a fire Do nat short circuit battery when storing it AN CAUTION Use of controls or adjustment or performance of procedures other than those specified herein may result in hazardous radiation exposure Let the laser beam reach the aimed object or the target without anybody else in the laser beam path When operating in an open area avoid radiating laser beam at eye level It is quite possible for the beam to enter into one s eyes and it i
17. s possible to lose visual sight temporarily and lose one s caution and awareness of other dangers avoid glaring beam Do not allow skin or clothing to come into contact with acid from the batteries if this does occur then wash off with copious amounts of water and seek medical advice Risk of injury by dropping the instrument or case Do not use a carrying case with damaged belts grips or latches Risk of injury by dropping a tripod and an instrument Always check that the screws of tripod are tightened It could be dangerous if the instrument falls over please check that you fix the instrument to the wallmount or tripod Please note that the tips of tripod can be hazardous be aware of this when setting up or carrying the tripod User Wear the required protectors safety shoes helmet etc when operating Exceptions from Responsibility 1 The user of this product is expected to follow all operating instructions and make periodic checks of the product s performance 2 The manufacturer or its representatives assumes no responsibility for results of a faulty or intentional usage or misuse including any direct indirect consequential damage and loss of profits 3 The manufacturer or its representatives assumes no responsibility for consequential damage and loss of profits by any disaster an earthquake a fire an accident storms floods an act of a third party and or a usage other than under normal conditions 4 The ma
Download Pdf Manuals
Related Search