User Manual - kodakpixpro.com
Contents
1. There are 7 options in Movie Size a e 1080p30 1920x1080 30fps e Movie Size 960p50 1280x960 50fps e Time Lapse e 960p30 1280x960 30fps e 720p60 1280x720 60f e Loop recording 720p60 GOPS 720p30 1280x720 30fps e Field of View e WVGA60 848x480 60fps e Motion detection e WVGA120 848x480 120fps e Wind Cut When selecting WVGA120 l the product shoots ultra high speed e White Balance movies and plays back with normal 30 fps speed in order to capture visually e Exit indistinguishable moments easily When selecting WVGA120 the maximum recordable time is 60 seconds when the time reaches 60 seconds the product will automatically stop recording and return to the viewfinder state O_o When selecting WVGA120 the sound cannot be recorded When selecting WVGA120 Time Lapse Loop recording or Motion detection cannot be enabled When selecting WVGA60 Time Lapse or Loop recording cannot be enabled The maximum recording time of a 4GB memory card Movie Size Memory card volume ine beeper facor time is about 4GB 4GB 4GB 4GB 4GB 4GB GB Time Lapse Time Lapse enables the recording of an interval of time and splices the frames together to present a condensed video which usually requires a long period of time to complete There are 7 options in Time Lapse A Off X 1 second e J 2 seconds eS 5 seconds2. p Camera and Smart device single playback mode 1 Select the file you want to delete and tap uj 2 Select DELETE to confirm the deletion in the pop up prompt screen Android system iOS system Would you like to Delete CANCEL DELETE DELETE Play the Video Camera and Smart device single playback mode Slow wireless transmission may impact viewing We suggest downloading the file to your device before viewing 1 Tap to play the video 2 Tap to pause the video 3 Tap gt to continue the video 4 Tap eG to return to the previous interface Android User Notification To ensure proper playback of video files created with the KODAK PIXPRO SP1 Digital Camera we suggest using the MX Player application 1 Download and install MX Player to your Android smart devices Download link https play google com store apps details id com mxtech videoplayer ad Run MX Player Choose Decoder under Settings and check the options as shown in the pictures Settings List gt Player Decoder HARDWARE DECODER Use H W decoder H W decoder local Set h w decoder as default for playing videos stored on local files H W decoder network N Set h w decoder as default for network play H W decoder 10 bit Use h w decoder for videos that have 10 bit color format Correct aspect ratio Correct h w decoder aspect ratio Use this option if h w decoder ignor
3. Cover Buckle 12 OK Button Playback Button 13 Direction Button Lower 14 Tripod Socket 15 Location Hole 1 Rear Cover Open Switch 6 7 Rear Cover 8 Rear Cover Lock 1 1 19 Battery Lock 2 batery Compare z romen 22 Meo 50 caase m ussree Installing and Dismantling the Lens Cover Two types of replaceable lens covers are provided for the product Standard Lens Cover Applicable for general use Do not use underwater Visual angle in the air is about 160 Will not focus underwater Underwater Lens Cover Applicable for use in water Visual angle in the air is about 130 and visual angle in water is about 90 Steps for dismantling the lens cover 1 Hold the product with your left hand and pull the lens buckle with your finger to the left end as illustrated in the picture Hold the lens cover ring with your right hand and rotate to the OPEN arrow direction When three alignment points are in a straight line loose your left hand from the lens buckle and remove the lens cover from the right with your right hand Alignment Points Steps for installing the lens cover 1 Hold the product with your left hand and pull the lens buckle with your finger to the left end as illustrated in the photo hold the lens cover ring with your right hand 2 When three alignment points are ina straight line buckle the lens cover to the lens and rotate a
4. can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment About this Manual Thank you for purchasing this product Please read this manual carefully and keep it in a safe place for future reference E JK Imaging Ltd reserves all rights to this manual No part of this published manual may be reproduced
5. lint free cloth Then open the rear cover and remove the battery and the memory card When opening the rear cover if there are water drops on the contact surface between the inside of the rear cover and the body please dry the water drops After using the product in water or near sand mud or other foreign materials please rinse it with clean water close the rear cover when cleaning After cleaning dry the product with a clean dry and lint free cloth If there is dust sand or other foreign materials on the waterproof rubber of the rear cover and its contact surface please wipe it with a clean dry and lint free cloth as soon as possible Before using the product underwater make sure that there is no damage to or foreign debris on the waterproof rubber gasket Then close the rear cover tightly to ensure the waterproof capability of the product Waterproof rubber with scratches and cracks will allow water to penetrate into the product Contact customer service immediately for maintenance with replacement of new waterproof rubber Rear Cover Waterproof Rubber Battery Notes Use only the battery specified for this product If the battery overheats during charging or use stop charging or use immediately Turn off the product remove the battery carefully and wait until it cools down Please keep the battery contacts clean and dr
6. or More File s Camera and Smart device index playback mode 1 Long press a file thumbnail to enter the 2 View fore and aft files by sliding a finger multiple selection screen up and down on the screen Soi sr aodig a6 a E 5 o ae 4 JUL 2014 4 JUL 2014 I 4 JUL 2014 1 JUL 2014 1 JUL 2014 p uL 2014 21 JUN 2014 21 JUN 2014 21 JUN 2014 3 Select one or more file s 3 1 Tap E after date folder gy to select all files under the date folder 1JUL 2014 21JUN 2014 B 21 UN 2014 18 JUN 2014 18 JUN 2014 21 JUN 2014 18 JUN 2014 18 JUN 2014 18 JUN 2014 1JUL 2014 o 1JUL 2014 B L204 21 JUN 2014 E 21 JUN 2014 21 JUN 2014 18 JUN 2014 18 JUN 2014 18 JUN 2014 Download Y Download the photos or movie in the camera to your smart device Camera Single playback mode 1 Select the file you want to download and tap Y to start downloading 2 Tap x in the downloading process and select Yes in the pop up interface to cancel downloading 3 After downloading is complete tap v to return to the playback interface Camera index playback mode 1 Select one or more file s you want to download and tap y to start downloading 2 Tap x in the downloading process and select Yes in the pop up interface to cancel downloading 3 After downloading is complete tap to return to the playback interface Share x Share the photos or videos to the social network site Ca
7. recording when there is no change in the image within 10seconds 4 When the image changes again the product will start recording automatically and this time it will regenerate a video file 5 During recording you may press the When the memory card is full will to stop recording become red font and flashes for 2 seconds When the Motion detection feature is enabled Time Lapse or Loop 15 00 recording setting cannot be performed r A Movie Size cannot be selected as gt WVGA120 xe Motion detection interface icon Indicates the total time of recording Indicates the time of the product GB Indicates the total time from the beginning of recording AS 00 00 01 x Wind Cut White Balance Wind Cut refers to the reduction of noise White Balance means that the user adjusts caused by wind the color temperature under different light sources to ensure that the colors are There are 2 options in Wind Cut reproduced correctly RQ Off There are 5 options in White Balance lt 9 Enable EP AWB Wind Cut method of operation j 36 Daylight 1 After the Wind Cut is enabled press to return to the viewfinder status LCD will e XA Cloudy display corresponding icons 2 Press to start recording ont Fluorescent 3 Press again to finish recording i E Underwater White Balance method of operation 1 After the White Balance is enabled press to return to the viewfinder
8. the Icons in the Playback Mode Single Playback Action cam Smart device Photo playback Video playback Photo playback Video playback interface interface interface interface ee Enter index playback screen x Enter photo or movie mode K Share the current photo or video to Download the current photo or video social networks to the smart device uj Delete the current photo or video A Rotate the photo Index Playback Action cam all Smart device 2 4 Lad fis D AA w G gt 8 JUN 2015 4 JUL 2014 1 JUL 2014 21 MAY 2015 21 JUN 2014 19 MAY 2015 eT Enter photo or movie mode R Select multiple files to share Enter the download mode to p Vs move the files in the camera u Select multiple files to delete jinto the smart devices Description of the Functions in the Playback Mode Gestures in the Playback Mode Rotate A Smart device single playback 1 Hide display the icons Single finger tap mode the photo or video once Rotate the photo by 90 2 Zoom in Quickly tap the photo twice or Tap A the photo will rotate 90 counter use two fingers apart to expand the photo clockwise each time this icon is pressed Sliding a finger to move around the photo Zoom out Quickly tap the photo twice again and it will restore the original size or use two fingers folded to reduce the photo 3 Browse fore and aft files Slide around with one finger Select One
9. transmitted transcribed stored in a retrieval system or translated into any language or computer language in any form by any means without the prior written permission of JK Imaging Ltd E All trademarks mentioned in this manual are used for identification purposes only and are properties of their respective owners E This manual provides you with instructions on how to use your new KODAK PIXPRO Digital Action Cam Every effort has been made to ensure that the contents of this manual are accurate However JK Imaging Ltd reserves the right to make changes without notice Throughout this manual the following symbols are used to help you locate information quickly and easily Indicates useful information Indicates precautions are to be taken while operating the product Indicates long pressing a certain point Indicates tap a certain point E In this manual digital action cam is referred to as action cam E Waterproof Dustproof Shockproof e Do not use or store this product in high Freeze proof temperature environment e JIS IEC waterproof grade 8 IPX8 e JIS IEC dustproof grade 6 IP6X e Height for shockproof rating is 2 0m e Suitable temperature range for freeze proof capability is 10 C and above Product Notes e Do not disassemble or repair the product by yourself e Do not heavily drop or knock this product Improper handling may damage this product e Avoid touching the lens c
10. 11 0 seconds ofS 30 seconds e aS 60 seconds Time Lapse method of operation 1 After selecting Time Lapse time press to back to the viewfinder status LCD will display corresponding icons 2 Press the LCD will display red font time countdown 3 Press again to finish recording 00 00 04 Movie Size cannot be selected as WVGA120 or WVGA60 The sound cannot be recorded When Loop recording or Motion detection is enabled the Time Lapse feature cannot be used Bo y Loop recording Loop recording allows for the recording of independent segments of movies according to selected time length from the beginning of recording The product will continually record movies of the length selected until the record button is pressed to end recording When the memory card is full the product will overwrite the recorded files starting from the first movie circularly There are 3 options in Loop recording Movie Size cannot be selected as GA Off WVGA120 or WVGAG6O E 9 minutes When Time Lapse or Motion detection B T is enabled the Loop recording feature cannot be used Loop recording method of operation 1 After selecting Loop recording time Loop recording feature can only be press to return to the viewfinder used when there is a memory card in status LCD will display corresponding the product icons 2 Press to start recording Turn off the product when the Loop 3 Press again to fi
11. G A 848x480 eo 848x480 848x480 120fps The maximum recordable time is 60 seconds Select 120fps as the frame rate of movie size to carry out high speed video recording The product shoots ultra high speed movies and plays back with normal 30fps speed in order to capture visually indistinguishable moments easily But the sound cannot be recorded Touch Capture Photo shooting mode There are 2 options e On e Off About e View the current version of the App eal Tap the official website on the interface and you can go to the website for more information Shooting Method All files are saved on the memory card of the camera Shooting 1 Align the camera lens with the shooting subject and confirm viewing through the screen of the smart device 2 Tap the other icons on the interface to set the corresponding parameters 3 Tap a to shoot photos Video Recording Tap the shooting mode icon on the shooting screen to enter the mode selection screen and tap E to enter the video recording screen 1 Tap the other icons on the interface to set the corresponding parameters 2 Tap G to start recording and then tap to stop In Wireless power saving enabled state a prompting message about breaking of wireless connection in 30 seconds will be popped up when video recording on the smart device At this moment if the user does not stop video recording wireless online will be automatically disconnected and the w
12. Kodak PDPO SP Digital Action Cam User Manual Declaration of Conformity Responsible Party JK Imaging Ltd Address 17239 So Main Street Gardena CA 90248 USA JK Imaging Europe 71 Clarendon Road Watford WD17 1DS UK Company Website http kodakpixpro com For Customers in Canada This device complies with Industry Canada license exempt RSS standard s Operation is subject to the following two conditions 1 This device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device For Customers in Europe C ECE mark indicates that this product complies with the European requirements for safety health environment and customer protection CE marked products are intended for sales in Europe This symbol crossed out wheeled bin WEEE Annex IV indicates separate collection of electrical waste and electronic equipment in the European countries Please do not m throw the equipment into domestic refuse Please use the return and collection systems available in your country for proper safe disposal of this product i For Customers in the U S A This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and
13. arge the battery prior to use between 0 C and 40 C You may use external power supplies If connected to the computer USB port output voltage of 5V output current of 100mA the product will have no of 1A namely vehicle power supply response due to insufficient power or mobile power pack to charge the Ea product Introduction to Various Button Functions Viewfinder status refers to viewfinder of recording and shooting To save power if the product is not operated for a period it will automatically enter the LCD off status Press any button can wake LCD Display all information when the No action itis hidd Power Button it is niaden Delete Button Press and hold turn off the product Recording mode Shooting mode switch Menu Button Playback Button Direction Button Lower No action OK Button Confirm selection No action Switch downward Enter single photo status No action Video Recording Button Enter viewfinder status Start recording Shooting Button except Wireless feature Shooting a photo Stop recording In the viewfinder status when the Motion detection or Time Lapse function is set to be enabled press to enter the state of preparing for video recording Power Button Delete Button OK Button Menu Button Direction Button Upper Playback Button Direction Button Lower Video Recording Button Shooting Button Movie Playback Single Photo Plavina Bac
14. ated E A A E E E 67 Connection Port Introduction scccczsaciconedetsncanmcesesanentestontamcrebed 82 Connect a COmpPUtST eee eae eRe een ee ee OR eee eee nee ia 82 HDMI Connected TV CUT soci tec svede cee spsieswecie ceeteress es eanbesdecctesisbveduad se esaeeu ened 84 PDO CONC SS spaesaateaascacecacoanasesoeaonaaacscsancaaganaransaaasaaienrenanaereont 85 Sele eoa e een E eee eee oer PEE oe eee ees eee enter eee ate 85 Prompts and Warning MESSAGES vs seiaiivcessancsinarusvniceessursesnensddesturnijevaedaceimededeles 88 Touple SO OUI execetereaceceteescteanistataute sede nace E ea ea aeae Eii 92 SPSCIAlLACCESSOMCS vi cstccsienitue dswacavarsenansenndeesarieaddasiveauetdennieaneed 93 mo ooy Accessories Included Your product box should contain the product you purchased along with the following accessories If anything is missing or appears to be damaged please contact your retailer Based on sales in different countries or regions the shape of the AC adapter will vary The actual product will prevail EN SS Fany Quick Start Guide Service Card Warranty Card Rechargeable AC Adapter USB Cable Li ion Battery B Standard Lens Cover Underwater Lens Cover Standard Lens Cover has been installed on the product when leaving factory Part Names 7 89 10 11 Video Recording Button Shooting Button Status Indicator Menu Button Direction Button Upper 10 Power Button Delete Button 11 Lens
15. be displayed files on internal memory will not be available to display If there are no files in the memory card or internal memory a no image warning window will appear Movie Playback 1 Select movie to be played back and press e to start movie playback 00 00 47 00 01 23 2 When playing back the movie an operation guidance will appear on the screen You can press buttons to perform the corresponding functions Press j Movie playback rewind multiple presses will fasten the speed x2 x4 x8 x16 Press Movie playback forward multiple presses will fasten the speed x2 x4 x8 x16 Press 0 Under normal playback mode the movie playback will be paused under the forward rewind or pause status normal speed playback will be recovered Press Movie playback back to the initial state mo o o Movie playback rewind or forward 00 00 47 00 01 23 Movie playback pause i are 00 00 47 00 01 23 There will be no sound output during rewinding or forwarding QQ Movie or Picture Delete 1 Select the movies or photos to be deleted and press to enter the Delete screen Press or to select Delete and press C9 to confirm 2 After a movie or a photo is successfully deleted the LCD will display the next movie or photo If you wish to delete additional files please continue per item 1 above 3 If you want to exit the Delete screen select Exit and press to con
16. can be taken _9 Playback mode 5 Battery state 10 Shutter 15 Start video recording 60 Stop video recording Parameter Settings Tap the icon to enter the selection screen and tap any of the options to confirm selection Shooting Mode There are 3 options Continuous Shot Cl It can take several photos at a time Movie Mode mp Enables video recording Auto Mode gy Enables photo shooting White balance The WB function allows the user to adjust color temperatures under different light sources so as to confirm that the color can be presented properly There are 5 options AWB AWB Daylight e amp Cloudy EB Fluorescent gt Qe Underwater Angle A ED 14m 1234567 Field of view sets the viewing angle There are 4 options o Wide Ultra Wide Medium Medium m MMMA Narrow Narrow m water Water Ring Menu Tap to show a settable menu Tap the menu items to be set to enter the item options screen Tap options to return to the menu screen Tap to return to the Remote Viewfinder screen Image Size 14M Moive Siz FHD 16 9 30p Touch Capture On About Image Size Set photo resolution BEA Pixel 2592x1944 Movie Size Set video resolution Recording Time Restraint Taa Fess 1280x960 50fps 1280x960 1280x960 30fps_ The maximum recordable time is 25 minutes Para 1280x720 60fps 1280x720 1280x720 30fps WV
17. d to the cable to the HDMI port of the product m The product will automatically enter the playback state after the connection is complete The operating method is the same as the Introduction to Basic Operation of Playback on page 31 If the product is connected to the TV while in the off state press and hold and to power on The product will automatically enter the playback state Specifications Design and specifications are subject to change without notice Active Pixels 14 24 Megapixels Total Pixels 15 31 Megapixels 1 2 33 MOS Lens Construction 6 groups 6 elements Still Image Exif 2 3 JPEG IRFON M Movie Format MOV H 264 Audio Linear PCM Stereo Focusing Range Normal 60cm Field of View Ultra Wide Medium Narrow Water Ring 4 3 14MP 4320x3240 Still Size 16 9 10MP 4320x2432 5MP 2592x1944 Image Dimensions 1920x1080 30fps 1280x960 50fps 1280x960 30fps Movie Size 1280x720 60fps 1280x720 30fps 848x480 60fps High Speed Movie 848x480 120fps Detection Features Face detection Waterproof Feature Up to 10 m underwater Shockproof Feature Up to2m Dustproof Feature Equivalent to JIS IEC IP6X LCD Screen 1 5 inch 115k Pixels ISO Sensitivity Auto 100 800 Exposure Metering Method Artificial Intelligence AE AiAE Face AE Exposure Control Method Program AE Burst Shot Supported Playback Modes Single Photo White Balance Auto AWB Daylig
18. es aspect ratio SOFTWARE DECODER S W decoder local Use s w decoder for local files stored on the device S W decoder network Use s w decoder for playing remote Decoder SOFTWARE DECODER S W decoder local e Use s w decoder for local files stored on the device S W decoder network Use s w decoder for playing remote network sources via HTTP FTP RTSP MMS and more S W audio Use s w audio decoder instead of h w audio decoder CPU core limit Specify the maximum number of CPU cores be used for s w decoding Color format YUV is experimental and does not work on all devices GENERAL Deinterlace Deinterlace by default Currently g deinterlacing works only with s w decoder The following video applications will also work VPlayer VLC for Android BSPlayer Free Menu Camera and Smart device index playback mode 1 Tap or slide from the left to the right of the screen to display the menu 2 Tap your desired setup item 3 Tap the option to return to the menu 4 Tap to return to playback interface YouTube This option is only under the iOS system About See Page 64 for explanations Connect a Computer The product can be connected to the The product supports Windows operating computer using a USB cable to allow for systems Windows XP Windows Vista copying the files from the product into the Windows 7 and Windows 8 and the Mac computer ope
19. evel interface and press 2 to confirm Press or to adjust the date and time display format and press 0 to confirm the display format In the date and time options press or to adjust the values and press to confirm After the setting is completed select S and press to confirm and back to Date Time in the secondary level interface Press to return to the viewfinder status Language Format The language can be set during the first Format can clear all data stored in the power on cycle If you wish to change the memory card or memory including protected language thereafter please operate as the movies and photos following There are 2 options in Format 1 Enter the Language in the secondary level interface and press to confirm e X Cancel 2 Press amp or to select language Z Confirm 3 Press x to confirm and back to Language in the secondary level When a memory card is inserted only interface the card can be formatted If you need 4 Press to return to the viewfinder to format the internal memory remove status the memory card first Copy to Card Copy to Card is to copy the files in the internal memory to the memory card There are 2 options in Copy to Card e X Cancel e SY Confirm When the memory card cannot be detected by the product options will not be displayed on the Copy to Card interface Reset Settings Reset Settin
20. firm Movie and or pictures cannot be restored after being deleted A protected file cannot be deleted Rotation The direction sensor comes with the product can automatically adjust the direction during file playback according to the rotating direction detected during shooting in order to ensure that what you see are positive images The direction of rotation refers to the direction rotating around the lens center clockwise or counterclockwise Only when the direction sensor detects that the product has rotated for 180 the rotation feature is effective Rotation of 90 or 270 is invalid The product will record the detected 180 rotation information in a file When you use a player supporting rotation tag identification Such as Quick Time for playing the image can be automatically converted to positive Introduction to the Setting Mode of Menu Options 1 Under the viewfinder status press G to enter first level menu interface of the menu Press amp or to select Mode Settings Movie Settings Still Settings AP Settings and General Settings N 3 Press x to confirm and to enter the corresponding secondary level menu interface 4 Select items with on the secondary level menu and press to confirm and to enter the tertiary menu interface oi Select Movie or Shot or Exit in the secondary menu and press confirm to back to the first level menu interface In the menu in
21. gainst the OPEN arrow direction 3 When the notch of the lens cover ring is aligned with the lens buckle loose your left hand from the lens buckle and remove your right hand from the lens cover Please select appropriate lens cover when taking videos and pictures otherwise it will affect the image effect When the product is exposed to fluctuations in temperature condensation may form on the inside surface of the lens cover If this happens remove the lens cover clean it with a soft dry lint free cloth and then reinstall the lens Installing Battery and Memory Card Open the rear cover First set the rear cover lock to the right and push the open switch of the rear cover downward Then rotate the rear cover around the shaft direction to open 24 Insert the battery into the battery compartment according to the negative and positive directions as illustrated in the following picture 3 Insert the memory card into the card slot according to the direction illustrated in the picture when the product is turned off When inserting a memory card make sure the notch direction of the card matches the notch direction of the memory card over the card slot Do not force the memory card into the card slot 4 Close the battery cover First rotate the back over around the shaft direction to close upward The rear cover will click when tightly c
22. gs can recover all product settings to the factory defaults There are 2 options in the Reset Settings e X Cancel e SY Confirm FW Version FW Version can display the current version When a new version is stored in the memory card the firmware can be updated There are 2 options in Update firmware e X Cancel e SY Confirm K Update Firmware New Ver X XX The following operation needs to be followed to update the firmware 1 Enter the FW Version interface and press to enter the tertiary level menu Update the firmware LCD will display New version X XX 2 Select W and press to confirm The product will start to update 3 Whether the update is successful or failed the product will automatically shut down If the low battery warning is displayed charge the battery before updating the firmware Introduction to Mode Settings 2 options in the Mode Settings ofthe Mode Settings method of operation EE 1 After selecting T or options press e Tn Movie for recording movies ICONEN 2 Press to enter the viewfinder status T Still for shooting photos and display your selected Ty or status Under the viewfinder status directly press to perform Tn or 6 status switch E Movie Settings Introduction Movie Size Movie Size refers to the image resolution There are 8 options in First Level menu during recording Movie Settings
23. hole of the action cam and align the screw on the angle bracket to the tripod socket of the action cam Rotate the screw for fixing Angle Bracket mount Screw Band 2 Set the band to your head and adjust the degree of tightness If you need to remove the mount please use one hand to push forward the angle bracket as directed by arrow and use a pointed object to push the buckles in the two side holes by order with another hand as directed by arrow Then remove the angle bracket out from the mount t Extended Arm You can add one or two extended arms except head bank mount to each kit to help you to adjust the mounting angle of the action cam more flexibly Extended Arm The Kodak trademark and trade dress are used under license from Kodak 2013 JK Imaging Ltd All Rights Reserved JK Imaging Ltd 17239 So Main Street Gardena CA 90248 USA JK Imaging Europe 71 Clarendon Road Watford WD17 1DS UK http kodakpixpro com Ver 8
24. ht Cloudy Fluorescent Underwater Internal Memory Approx 100 MB Storage Media Micro SD Micro SDHC Card Up to 32GB Support MMC Card not supported Support 27 languages English Chinese simplified and traditional Japanese Language Korean French Spanish Portuguese Thai Indonesian Vietnamese Italian Support German Dutch Russian Polish Swedish Danish Finnish Norwegian Greek Turkish Hungarian Croatian Czech Arabic Hindi USB 2 0 Micro 5 pin USB HDMI Type D Power supply Rechargeable Li ion Battery LB 080 3 6V 1250mAh In action cam Charging Battery Approx 350 Shots Based on CIPA Standards Approx 130 min for Video Performance 1080p 30fps Temperature 10 40 C Humidity 0 90 Environment 84 7x51 4x39 5mm Based on CIPA Test Standards Weight Approx 155g excluding battery and memory card Prompts and Warning Messages Message Description When using Copy to card if the number of folders in the memory card exceeds the maximum number of folders 999 the copy and access actions cannot be performed This message indicates that a long read time may be caused due to too many folders in the product During shooting if the files or folders have reached the maximum number 9999 for files 999 for folders the memory card cannot be accessed When the file is protected the message will appear on the screen if the delete action is performed When turning o
25. ireless disconnection message will be displayed while video recording is continued on the camera Stop video recording and lower the temperature of smart device in case the smart device s temperature is too high When the high temperature reaches the limit the smart device automatically stops video recording and shuts down after saving the files Playback There are two playback modes Single playback movie photo e Index playback action cam smart device Switching of the Remote Viewfinder Mode and the Playback Mode 1 Tap to enter the camera single playback interface Tap to enter the index playback interface Tap any small figure to enter the single playback interface amp Tap x to enter the remote viewfinder interface Remote Viewfinder Single playback Index playback interface interface interface Switching Camera and Smart Device Index Playback 1 On the camera index playback interface tap 4a to enter into the smart device index playback interface 2 On the smart device index playback interface tap iaJj to enter into the camera index playback interface Camera Smart device index playback interface index playback interface On the smart device index playback interface tap a small figure to enter into the smart device single playback interface On the camera index playback interface tap a small figure to enter into the camera single playback interface Introduction of
26. k Fast Forwarding ying Rewinding Back to the initial state of the movie Press and hold turn off the product Photo file no action Normal speed Continue to Movie file start playback playback play back Enter viewfinder status Turn On Off Turn on When the power is off press and hold for more than 2 seconds to turn on the product or press and hold for more than 2 seconds to turn on the product and enter the playback status Turn off When the power is on press and hold for more than 2 seconds to turn off the product If the product cannot be turned on off normally you can remove the battery for forced power cut Set your Language Date and Time after the first power on 1 Press and hold the to turn on the product and enter the language selection screen 2 Press amp or to select language 3 After pressing X button to select desired language the product will enter Date Time setting screen Press or to adjust the date and time display format and press to confirm the display format 5 In the date and time options press or to adjust the values and press to confirm 6 After confirming automatically go to and press to confirm and enter the viewfinder status gt amp Date Time CADODAD LCD Screen Display WZ WY Myre SS 4 Nard 20 E Mode Display Time Lapse Display Burst Shot Display a oe
27. losed Finally move the rear cover lock to the left Memory card refers to Micro SD card or Micro SDHC card is optional which is not included in the product package and needs to be purchased separately Please purchase a genuine memory card with a storage capacity range of 4GB to 32GB in order to ensure the safe preservation of data It is recommended to use a memory card of Class 4 or higher To remove the memory card please open the rear cover and gently push the memory card After it is ejected remove the card carefully The product will automatically turn off if the memory card is inserted and extracted when the product is on at Charging Please charge after the product is turned off 3 You can also connect the product to your 1 Connect the product to the AC adapter computer with a USB cable to charge the wath a USB cable battery If you press and hold the power button during charging to turn off the 2 Then insert the plug of the AC adapter to product the charging will be stopped the power outlet for charging Charging indicator Ja m eg Red flash Charging The indicator will go out once charging Of is finished and the Action Cam will be powered off automatically To have maximum battery life charge the battery for at least 4 hours the first ss ys time After the battery is stored for a long l period use the supplied AC adapter to Please cnarge the oanet indoors ch
28. m functional operations can be enabled on the smart device If there is a need to interrupt the connection press x so that the selection interface appears select Y press interrupt connection and return to the SSID interface 3 If there is a need to turn off wireless press button or press 0 after selecting Sf in the SSID interface so that the selection interface appears Select YW press to turn off wireless 2 If connect APP failed press 0x to return to the SSID interface select press so that the selection interface appears select Y press ox This will change the WPA2 password Next perform connection operation again on the smart device Download and Install App PIXPZO from the path below and install it ANDROID APP ON Android system ence For Android devices search and download the App PIXPRO SP 1 in Google play and install it following the instructions on the interface https play google com store Apps details id com jkimaging pixproremoteviewer Download on the iOS system L NEO For Apple devices search and download the App PIXPRO SP1 in App store and install it following the instructions on the interface EEE Establish a Connection Wi Fi Connections iOS System and Android System To optimize Wi Fi performance please close other unnecessary programs running on the smart device For an Android syste
29. m smart device you can directly tap the App icon QJ to enter PIXPRO the Select connecting device screen Select the SSID name of the camera to be connected enter an eight digit password and tap Connect If connection fails tap O to try to reconnect Connection Failed XXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXAXXKXAAXXKAAXXKAKK XXXXXXXXXXXX XXXXXXXXXAXXX XXXXXXXXXXX XXXXXXXXXXXXXXXAXX When it is unnecessary to connect to the camera or unable to connect the camera tap the icon 4 on the screen of the smart device to perform related operations under the playback mode of the smart device Position Service Function Remote Viewfinder When connected successfully you can tap the App icon K to start it Enable xpo the GPS function on the smart device by following the prompts on the interface PIXPRO SP1 can record GPS location on picture files This function is not available for video files After finishing setting position service the App will enter the viewfinder interface Camera functions can be accessed from this screen On the Remote Viewfinder interface tap A White balance icon to hide and tap DN to restore display Remote Viewfinder Interface Shooting Interface Movie Interface FHD HD WVGA e770 Dm mo 14m 10m 5m ver Z O g AWB OX 4 tm OX 3 15 Shooting mode 2 Angle 7 peer Oy By ES 12 Recordable video time that
30. memory card into the card slot Before using a brand new memory card please format the memory card first A photo or video taken with the product will be stored in the folder that is automatically generated on the memory card Do not store photos or videos that are not taken using the product in these folders in case that the files cannot be normally recognized in playback Do not directly edit the data on the memory card Copy the data to your computer disk before editing Do not modify the names of the files or folders on the memory card using your PC Modifying the name of the files or folders may cause the files to not be recognized by the product or possibly an error may occur Please turn the product off before removing the memory card Otherwise the memory card could be damaged When the product is stored for a long period of time please backup the data on the memory card and remove the memory card for storage Other Notes Do not disconnect the power or turn the product off during the update process Doing so may cause incorrect data to be written and the product may not power on later When using your product on an airplane observe the relevant rules specified by the airline Due to the limitations of manufacturing technology the LCD screen may have a few dead or bright pixels These pixels do no effect the quality of the photos or video If the LCD screen is damaged pay particular attention to
31. mera single playback and index playback mode 1 Select one or more file s you want to share and tap x to start downloading 2 Tap in the downloading process and select Yes in the pop up interface to cancel downloading 3 After the download is completed the photos or videos on the smart device can be shared e When the mobile data network is open Select the social network site to share e Mobile data network not open E iOS system Please share according to the interface prompt Mm Android system XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXX SETTING NETWORK SETTING NETWORK Open mobile data network or Wi Fi for internet access CANCEL Cancel sharing After the SETTING NETWORK is selected and the network is switched the interface has 3 options SETTING NETWORK change the network settings SHARE select the social network site to share CANCEL cancel sharing When the network is changed the App will close automatically Smart device single playback and index playback mode Please share according to the operating methods for sharing in single playback and index playback mode of the camera A lI Delete 1 Delete the selected photos or videos Camera and Smart device index playback mode 1 Select one or more file s you want to download and tap m 2 Select DELETE to confirm the deletion in the pop up prompt screen
32. mum folder number Writing speed of the memory card is slow Too many videos to process High temperature warning Possible causes Solution E The battery has been depleted M Charge the battery If the files or folders have reached the maximum number 9999 for files 999 for folders the memory card cannot be accessed When a memory card lower than Class 4 is used to record a HD or above movie the writing speed will be slower and recording will not continue The number of pictures or folders in the memory card exceeds the specifications so the playback cannot be displayed or played back by date Battery overheat E Copy the data to the computer disk and format the memory card using the product Use a higher class memory card or format this card before shooting Delete unwanted files Remove the battery when the product is turned off Continue to use the battery when it cools Special Accessories Let the action cam accommodate to your activity there are different options of accessories available Accessories bundle vary per distribution retailer To purchase additional accessories separately please contact your local retailer customer service support or visit http kodakpixpro com for more customer service details Before using especially in water or strenuous activity please pay attention to make sure the product is tightly secured to prevent damage or loss to the product Please ensu
33. n the LCD and immediately initiate terminate recording Pressing any other button will only turn on the LCD dQ LCD Screen Display under Playback Status VEA SH a en 1080 TION Wen Si 6 Ree eee Pp Ii ANU Ko 2 Wid Medi N Water Ri SY WB i 8 am TE lide dium arrow A Water Ring Hide 00 01 23 9 10 Taos SAC Ce 2013 07220 12 21 SHS SSR 1 AS AD D A oD oD 13 KOOR AS 14 ZARS O49 124721 1 Movie Display 10 White Balance Display Some icons will automatically 2 Field of View Display 11 Time Lapse Display hide after a 2 second display 3 Memory Card or Internal 12 Display of Current number Memory Display of Shots Total Number of Only displayed when 4 Battery Status Display Shots playing back the movie file 5 Loop recording Display 19 Movie Time Length e TaSi Display E Indicates 16 9 display pay 14 Shooting Time and Date range 7 Movie Size Display Display 8 _ Still Size Display I Indicates 4 3 display 30 Motion detection Display range co Introduction to Basic Operation of Playback Single Photo 1 When in viewfinder status mode press to enter the playback status of video and pictures 2 Display movie or picture files on the LCD screen 3 Press or to view the movies or pictures stored in the memory card or internal memory Press to return to the viewfinder status When the memory card is inserted only files in the memory card will
34. n the product or pressing the product detects that the memory card is out of space Reset Mode End the message after the product processing End the message after the product processing The message will disappear after 2 seconds The message will disappear after 2 seconds The message will disappear after 3 seconds Message Description When turning on the product or pressing the product detects that the internal memory is out of space Updating firmware The memory card still cannot be recognized after format An error occurs when reading the memory card Interruption logging problem is encountered in the period of writing in the memory card or recording in the video recording or shooting process Reset Mode The message will disappear after 3 seconds User should do nothing The product will turn off automatically after the update is completed The message will disappear in 2 seconds and the screen of format or not will appear The message will disappear in 2 seconds and the screen of format or not will appear Return to the viewfinder status will be displayed in 2 seconds Message Description Reset Mode E The internal memory still cannot be recognized E The message will disappear after format in 2 seconds and the screen Interruption logging problem is encountered On tormat or nor wih appear in the period of writing in the memory card or Return to the viewfinder
35. nish recording recording function is enabled and then estart the product You ll find the Loop recording function is still enabled 47 Field of View Field of View means the image receiving angle for the product There are 4 options in Field of View EMEP Ultra Wide eet Medium Pernt Narrow gt Water Ring Field of View method of operation 1 After selecting the Field of View angle press to return to the viewfinder status LCD will display corresponding icons 2 Press to start recording 3 Press again to finish recording Medium or Narrow can only be selected when the Movie Size is set to 1080p30 If a Movie Size other than 1080p30 is selected under Medium or Narrow status the product will automatically set the Field of View to Ultra Wide Motion detection Motion detection means that if the product detects moving objects entering into the LCD screen it will automatically start recording During the recording process if there is no moving object detected for 10 continuous seconds the recording will be automatically paused There are 2 options in Motion detection ES Off IAN Enable Motion detection method of operation 1 After the Motion detection is enabled press to back to the viewfinder status LCD will display corresponding icons 2 Press if the product detects moving objects it will automatically start recording 3 The product will stop
36. nt and the windshield and then attach the suction cup to the windshield or smooth surface Press the handle to make it attached to the windscreen Handle Vented helmet strap mount A accessory applicable to bicycle helmet Installation Method 1 Expand the band first and then thread both ends of the band into the helmet 2 Thread both ends of the band into the buckle and then press the buckle clamp Buckle Clamp 3 Align the location pole of the base to the location hole of the action cam and align the screw on the base to the tripod socket of the action cam Rotate the screw for fixing 4 Assemble the base pre tightening handle and vented helmet strap mount according to the direction illustrated in the picture First press the base into the vented helmet strap mount and then rotate and tighten the pre tightening handle Q Base EB Pre tightening Handle T a Buckle Adhesive Mount Vented helmet strap mount B accessory applicable to bicycle helmet Installation Method 1 Align the location pole of the mount to the location hole of the action cam and align the screw on the holder to the tripod socket of the action cam and then rotate the screw with a tool like a coin to fasten 7 3 2 Expand the band first and then thread both ends of the band into the buckle Thread both ends of the band into the buckle and then press the buckle clamp Buckle Clamp Handheld mount accesso
37. nt to the object to be used Pre tightening Handle Tether Adhesive Mount Double sided adhesive is disposable It can be purchased separately and replaced if needed Double sided adhesive Bar mount accessory applicable to bicycle Installation Method 1 Set the bar clamp to the handlebar and rotate the screw for fixing 2 Open the bottom part of the fixing sleeve and set it in the Action Cam Insert the connector into the bottom part of the fixing sleeve and then tighten them with screw P Screw si Fixing slee 7 Connector 3 Assemble the base pre tightening handle and bar clamp according to the direction illustrated in the picture First press the base into the bar clamp and then rotate and tighten the pre tightening handle y ep Pre tightening Handle Suction cup mount accessory applicable to be attached to the automotive windshield or smooth surface Installation Method 1 Align the location pole of the base to the location hole of the action cam and align the screw on the base to the Tripod Socket of the action cam Rotate the screw for fixing 2 Assemble the base pre tightening handle and suction mount according to the direction illustrated in the Picture First press the base into the suction cup mount and then rotate z and tighten the pre tightening handle pe Base Sp Pre tightening Handle Suction Mount 3 First clean the suction mou
38. o ea Loop recording Display 6 Wind Cut Display 7 Motion detection A 8 9 10 White Balance Display 11 12 13 Display Memory Card Display 1080 ED ps0 720 720 AWVGA WVGA 8 ioe e Jeee Wide Medium Narrow Water Ring il T wise je 00 0 1 23 go Wee B 3 WV ANS L X 1 7 TAN nee aia gece Some icons will automatically hide Still Size Display after a 2 second display Press Field of View Display to display all current setting Remaining Recording Message Time Display Number of remaining shots Display Indicates 16 9 display range Battery Status Display Internal Memory IM Indicates 4 3 display range Introduction to Basic Operation of Recording and Shooting 1 Enter the viewfinder status mode and press to switch between recording mode and shooting mode 2 Align the lens to the object to be recorded and press for recording or shooting 3 Under the recording mode repress the to stop recording 00 04 23 Under shooting mode status when the product detects a human face a green focus frame will appear When two or more human faces are detected a green main focus frame and a white secondary focus frame will appear When the product rotates around the lens axis for 180 the display screen on the LCD is positive display When in still and video record mode the LCD may turn off to save power Pressing will turn o
39. over and lens element please use professional lens cleaning paper together with lens cleaning agents to wipe the lens and keep the lens clean e Do not use corrosive alcoholic or organic solvent containing cleaners to wipe this product Do not expose the lens to strong light sources e g Daylight etc for extended periods of time Do not use or store the product in strong magnetic field environment If the product is quickly transferred from a low temperature environment to a high temperature environment water condensation may occur in the product due to physical changes In this case it is recommended to wait until the product returns to room temperature before you turn it on If a photo or video cannot be played back due to human caused improper operation the Company shall assume no liability or responsibility for compensation Store the product in a dry and clean environment when you are going to store the product for a long period of time a Waterproofing Notes Do not use the product below 10 meters 32 8 feet underwater The product will remain waterproof for one hour at the depth of 10m 32 8 feet Do not use this product in a geothermal spring or in water at a temperature greater than 40 C Please do not open the rear cover underwater If water accidentally comes in contact with the product please do not open the rear cover immediately Turn the product off and dry it with a clean dry and
40. rating system Steps 1 The product display will show a rolling Open the folder of the product on the Open the rear cover of the product connect one end of the USB cable to the computer the computer needs to be in on state and the other end to the USB port of the product connection cartoon The computer will automatically sense the product computer and copy the data you need to the computer After transmission is completed please cancel the USB connection by safely pulling out the USB device from the computer system Pull out the USB cable The product will automatically shut down If connected to the computer USB port of 100mA the product will have no response due to insufficient power supply Pressing for more than 2 seconds will cause shut down and stop of communication between the computer and the product If a memory card is inserted in the product only files in the memory card will be read If needing to read the files in the internal memory please pull out the memory card before connecting to the computer HDMI Connected TV Output The product is capable of realizing movie and photo playback on a TV through HDMI The HDMI connection defaults to automatic connection mode Steps 1 Open the rear cover of the product connect one end of the HDMI cable not included to a TV which is up to the HDMI standard the TV and the product both need to be turned on and the other en
41. re that the adhesive surface is clean before using double sided adhesive accessories Dirt grease or other foreign matter will reduce the effectiveness of the double sided adhesive After fully assembling the accessories please check to make sure that the screw and pre tightening handle are in the proper position and fully secure For ease of assembly please line up the marks on the base and pre tightening handle per the diagrams below Pre tightening handle Mark Adhesive mount flat accessory applicable to skateboard Adhesive mount curved accessory applicable to helmet Installation Method There are two types of adhesive mounts flat and curved You may select based on the shape of the object to be used Both types can be assembled in the same way taking the adhesive mount flat as an example 1 Align the location pole of the base to the location hole of the action cam and align the screw on the base to the tripod socket of the action cam Rotate the screw for fixing Base Location Pole Screw 2 Tie one end of the tether to the adhesive mount and the other end to the rear cover shaft 3 Assemble the base pre tightening handle and adhesive mount according to the direction illustrated in the picture First press the base into the adhesive mount and then rotate and tighten the pre tightening handle Y 4 Tack the double sided adhesive at the bottom of the adhesive mou
42. recording in the video recording or shooting status will be displayed in 2 process seconds When a memory card lower than Class 4 is used to record a HD or above movie the writing speed is too slow and recording will not continue E Cancel the message and return to the viewfinder status in 4 seconds The time of file processing imaging processing in synthesis in saving edition after processing archiving coping in Format and the like exceeds 2 seconds E The message will disappear after the operation is completed Description Reset Mode E Connecting to the HDMI device connection is succeeded It will shut down after displaying for 2 seconds E A message appears to prompt updating after full charging and returning to the update screen E Caution will appear before power off when the battery of the product is already dead E The firmware cannot be updated when power is insufficient It will shut down automatically in 2 seconds and can be recovered to use only after the temperature is reduced E The message will be displayed when the temperature of the battery reaches 70 C during recording Return to the menu interface in 2 seconds and recover use only after the temperature is reduced E When the AP setting is enabled the message will be displayed when the temperature of the battery is in the range from 68 to 70 C Trouble Shooting Problem Product does not turn on Exceeded maxi
43. ry applicable to be handheld Installation Method 1 Align the location pole of the mount to the location hole of the action cam and align the screw on the holder to the tripod socket of the action cam rotate the screw for fixing Location Pole Surfboard adhesive mount accessory applicable to surfboard Plane Support Small Plane Support Large Installation Method 1 Align the location pole of the base to the location hole of the action cam and align the screw on the base to the Tripod Socket of the action cam Rotate the screw for fixing 2 Tie one end of the tether to the plane support small and the other end to the rear cover shaft of the action cam y 3 Assemble the base pre tightening handle and plane support large according to the direction illustrated in the Picture First press the base into the plane support large and then rotate and tighten the pre tightening handle Base B Fre tightening Handle Qe Support Large 4 Tack the double sided adhesive at the bottom of the plane support large and the plane support small to the object to be used Double sided adhesive is disposable It can be purchased separately and replaced if needed Head strap mount accessory applicable to mount the action cam on your head Location Pole Ze Installation Method 1 Insert the angle bracket into the mount align the location pole on the angle bracket to the location
44. secccceeecececeueccccseueeeeceeuseeessusecesseeseeessaeeeeesaes 27 Introduction to Basic Operation of Recording and Shooting cc sseeeeeees 28 LCD Screen Display under Playback Status ccccccceesssseeeeeseeeeeeeseeeeeeeaees 30 Introduction to Basic Operation of PlayDack cccccccceceeeseeeeeeeeeeeessseeeeeees 31 Introduction to the Setting Mode of Menu Options cccceecccceeeeeeeeeeeaeees 36 Menu FPO GUC TION sssi 37 Introduction to General Settings nsciiccsceicccsts veccncedeavenesnedsncceeadeiencteeecnscecnisexe lt eaceaahe 38 Introduction to Mode Settings sce cseiexessscctaseccsasesecncsnnescneedtedanieserenaestiedsectdeesdens 43 Movie Settings IMPOGUCIION ccsccdectossastencstesienisncieugeneeendincanadeniceasashieadeddedssebenbieas 44 Still Settings Introduction cccccccseeceecceeseeeceeesecececesceeeceeeeecseneesecsusseessenaess 51 AP Settings Introduction oes esccscc es oscecezsewetsases2eect2 aueia cond sasisncddenesiateideietiaisttiencane 54 Connecting the Camera with the Smart Device 57 Download and Install APD a cgete nts ee eienc severe eviedeinece iees stvee sterol Nee dieietncmsateddtentide ai Df Establish a CONNECCION aiskveetesesisestas ness anneni Rir e rE Ea 58 Smart Device APP Operating Method ee 59 Position OCICS FUNCION sssirscsaisi enini a a EEan aa E 59 Remote VIC WINN eesse ine a aE Aa eaea 59 PY OO ahaa ct E E E eh E E
45. status LCD will display corresponding icons 2 Press to start recording 3 Press again to finish recording Still Settings Introduction There are 5 options in First Level menu Still Settings Still Size Burst Shot Field of View White Balance Exit Still Size The Still Size indicates the number of pixels used to capture the images A photo having higher image resolution contains more details and is capable of better meeting big screen fine photo printing requirements There are 3 options in Still Size e 14MP 4320x3240 4 3 e 10MP 4320x2432 16 9 e 5MP 2592x1944 4 3 Number of photos that can be stored on a 4GB memory card Approximate Still Size Memory card maximum number of images 913 shots 4GB 1211 shots 4GB 2398 shots Burst Shot Burst Shot allows ten photos to be captured continuously one single time before auto pause There are 2 options in Burst Shot His Off Enable Burst Shot method of operation 1 After Enable in Burst Shot is selected press to return to the viewfinder status LCD will display corresponding icons 2 Press to enable Burst Shot shooting It will stop after 10 photos are taken Field of View White Balance Field of View means the image receiving White Balance means that the user adjusts angle range of the product the color temperature under different light sources to ensure that
46. terface except for the Wireless connecting status press to return to the viewfinder status Menu Introduction Field of View Field of View White Balance Level Sound Settings Menu Wind Cut White Balance Exit Introduction to General Settings 10 options in the General Settings of the Sound Settings first level menu There are 4 options in the Sound e Sound Settings Settings lt Power Off Cp Volume 1 e Wireless Power Saving aed Volume 2 e Date Time lt Volume 3 e Language Ch Off Format Power Off e Copy to Card Power Off means the product will automatically shut down after 60 seconds Reset Settings after the LCD is off FW Version There are 2 options in Power Off Exit Q of 60 seconds oo Date Time Date and time can be set during the first power on cycle If you wish to change the date or time thereafter please operate as the following The Power Off will be invalid during recording movie playing back and wireless connecting Wireless Power Saving Wireless Power Saving mode means that after 30 seconds of remote controlled recording with the APP the wireless connection will automatically disconnect but the product will continue to record Wireless power saving mode will prolong battery life There are 2 options in Wireless Power Saving GP on e EP Enable dQ 1 Enter the Date Time in the secondary l
47. the colors are There are 4 options in Field of View reproduced correctly wide Ultra Wide There are 5 options in White Balance DE Medium AG AWB Auto White Balance eet Narrow ZE Daylight Water Ring e XA Cloudy Field of View method of operation one Fluorescent 1 After selecting the Field of View angle press to return to the viewfinder Ay Uindenvater status LCD will display correspondin oe sat ala J White Balance method of operation 2 Press to shoot 1 After an option of the White Balance is selected press to return to the viewfinder status LCD will display When the image size is set to 5MP corresponding icons Medium and Narrow cannot be pree 2 Press to shoot ee AP Settings Introduction The action cam can be wirelessly connected 5 The action cam and the smart device can with your smart device only be connected one to one Please review the following items before your 6 When the smart device judges the first connection system to be out of memory the App will not be able to run normally Please clean 1 Your smart device system version needs y up the memory of the smart device to be iOS 7 or higher and Android 4 2 or higher If not please upgrade your smart 7 When the temperature of the battery is device system version higher than 68 C N Please do not use in places having high AP setting cannot be enabled intensity magnetic field elec
48. the liquid crystal in the screen If any of the following situations arise take the recommended immediate action indicated below 1 If liquid crystal comes in contact with your skin please wipe with a dry cloth wash thoroughly with soap and rinse with plenty of clean water If liquid crystal gets into your eye flush the eye immediately with plenty of clean water for at least 15 minutes and then seek for medical assistance If liquid crystal is swallowed immediately flush your mouth thoroughly with clean water and induce vomiting Seek for medical assistance c Blore Yo Sla oreinen are nE a RE EE EEEN 1 SASI NOICE ere r E ES 4 CO aeae E E E EA 9 Geng FSA esger EE EESE 13 ACCess ries NCIUQE lt cx daiosiccemaceatesesineiseoiatincs ees aynneuesiacten ursinnig 13 PAC IN UNS Sysop re aqieiee 15 Installing and Dismantling the Lens COVER cccecccecseeeeeeeeeeeeeeeeeeeeeeaaeeeeees 18 Installing Battery and Memory Card ccccecccecseeeeeeeeeeeeeeeeeeeeeeeeeeeeeesaeeeeees 20 AAG occas ecstacy eani a aA EER A 22 Introduction to Various Button FUNCTIONS 0 cccccccceccaccceeececececececeneaeeeataeers 23 Operation ICU Ce cesiets rim aase etetrudaanmanoteciebesistededsanennamneaescndcin 25 TET ONE OTs e Meagidashdntouusnatualibadosmuadie ie emaddanueten 25 Set your Language Date and Time after the first power On ccccceceeeeee 26 LCD Screen Display cccccccsss
49. trostatic and electric wave interference for example near a microwave oven which may cause failure in receiving signals Wireless connection will be automatically disconnected OO Please maintain a distance between the action cam and the smart device less than 10 meters 32 8 feet without signal shielding interference KR Please do not use wireless connection functionality on a plane mo oo y Connection setting method of the product and the smart device Step 1 setting up the product 1 Press in the viewfinder status select AP Settings and press x to enable wireless connection function so that the SSID interface in AP mode appears SSID and WPA2 password messages are displayed in the interface AP mode SSID PIXPRO SP1_ 1234 WPA2 PSK 12345678 S Zor Wireless connection process takes about 30 seconds At this moment except for other buttons are deactivated Step 2 setting up the smart device 1 Enable the wireless function of the smart device to search surrounding wireless devices 2 Select the name of the action cam to be connected PIXPRO SP1_XXXX and input the eight digit digital password displayed next to WPA2 PSK on the action cam 3 Download the special APP installation package APP name PIXPRO SP1 from the device appropriate APP store and install PIXP2O the APP Step 3 set up completion 1 Once the APP is connected to the action ca
50. y Please install the battery according to the positive and negative markings on the battery compartment Never force it into the battery compartment If battery fluid leaks into the product please contact your retailer If battery fluid leaks onto your skin rinse your skin immediately with clean water and seek for medical attention To prevent the battery from being damaged do not drop the battery impact it with heavy objects or scratch it with sharp objects Do not let the battery come in contact with metal objects including coins to avoid short circuiting discharging excessive heat or possible leakage Do not heat the battery or throw it into a fire to avoid a possible explosion When the product is stored for a long period of time please remove the battery Do not store the battery in a hot environment In colder environments the performance of the battery may be noticeably reduced Do not attempt to disassemble the battery Disposal of used batteries should be carried out in accordance with the local national or regional regulations Memory Card Notes The memory card referred to in this manual is Micro SD Card or Micro SDHC card Please buy a genuine memory card of a well known brand Please keep the memory card clean and dry When inserting a memory card make sure the notch direction of the card matches the notch direction of the memory card mark near the card slot Do not force the
Download Pdf Manuals
Related Search