User Manual for Naviter Oudie
Contents
1. on COM 1 at 4800bps When the navigation device is turned on for the first time or after a long period of non use initialising the integrated GPS receiver can take up to 20 minutes Optimal conditions for problem free and fast GPS receptions are having a clear view of the open sky no high buildings immediately close by and remaining in one place until the GPS position has been determined Mounting with the holder The mounting kit consists of the cradle and the suction cup mount First insert the cradle into the suction cup mount until you hear and feel a strong click Then insert Oudie into the cradle so that you hear a strong click again Use the screw on the holder to adjust the tightness of the cradle Turn the cradle into ideal viewing position for your use Note Do not place the Oudie in positions which obstruct pilot s movements vision of nearby traffic or instruments Starting the navigation When you turn the Oudie on for the first time or after a reset navigation software is started automatically For more information about the navigation software in the Oudie please consult the documentation supplied on the CD ROM Connecting to external Data source Serial cable The supplied Serial data cable enables you to connect to external data source such as your Variometer Flight data recorder anti collision device or similar It is important to understand that the Supplied Serial cable must be connected t2. User Manual for Naviter Oudie Naviter d 0 0 Gradnikova 89 4240 Radovljica Slovenia www naviter com support naviter com Introduction Thank you for choosing Oudie Company Naviter is dedicated to solving glider pilot s problems and Oudie is one of the answers in this challenge Its intended use is helping glider para glider and hang glider pilots navigate during leisure cross country and competition flights Oudie works great in combination with other Naviter products such as SeeYou for the PC ConnectMe Soaring Spot and others We sincerely hope that you will be satisfied with your purchase and would be delighted to hear back from you More information latest firmware and support are available through www naviter com Index Introduction ebene 1 WAG OX are essen 2 What s in the box 220rsnneernneensnnnnnnnnnnennennnnnn 3 Getting to know Oudie nneenenseseeenennennnenneneenenenn 4 Turning Oudie on and off ueeeeeeneneeeneeneenneenennn 5 Charging the battery css ennen 6 Internal GPS reception cccccccccccsssssseceeeeesseesees 7 Mounting with the holder cccccssssceeceeeeeesees 8 Starting the nNavigatiOn ccccessscececeeeessssssaeees 9 Connecting to external Data source 10 Troubleshooting 22222000000n0ennennenneenenennnnen 11 Notice of non liability neneeenee 12 Limited Warranty cireni seisseen ninss 13 Technical specifica
3. ait mode Landscape mode Preinstalled maps _World wide Installed software _SeeYou Mobile SE Localization Yes gt 17 languages 14 Naviter Oudie www naviter com 15
4. o 12 V direct current source in order to work Bluetooth Another way to connect to external data source is to connect through Bluetooth Use the Oudie s navigation software to pair Bluetooth device with Oudie in order to receive serial data from your device 10 Troubleshooting Symptom Device doesn t turn on after pressing the power button or shuts down during bootup Solution Charge the device s internal battery Symptom Navigation software does not find my position Solution Get out where the view to the sky is unobstructed and wait for up to 20 minutes If you still cannot acquire satellites check Menu gt Settings gt Input options Symptom Navigation software displays NODATA in the GPS Fix navbox Solution Check the Menu gt Settings gt Input options Internal GPS is on COM 1 external Serial port is COM 4 Other parameters depend on the connected device For other problems contact support naviter com 11 Notice of non liability This is a personal navigation assistance device only It is not a replacement for any legally required device method or service User must maintain all safety measures as if this device was not on board of the aircraft Before it is put to use it is the responsibility of any user who will use this device to become familiar with operation and safety aspects of this device Using the system improperly could cause failure and lead to possible property damage and or personal inju
5. ry Naviter assumes no responsibility for property damage accidents injury or death that may result from the misuse of this device equipment This includes any use of this device equipment outside the scope of common sense the User Manual inserts and other related documentation 12 Limited Warranty Naviter company warrants your Oudie against defects in materials and workmanship for one 1 year from date of purchase invoice The warranty is non transferable Should any part of the Oudie become defective within the warranty period return the Oudie with a description of what why it is not functioning and we will repair or replace it at our discretion free of charge you pay only shipping to Naviter Return the unit to Naviter d o o Gradnikova 89 SI 4240 Radovljica Slovenia The warranty is non transferable and only valid if Naviter determines that the system and its components have not been damaged due to improper use been submerged in fluids dismantled or abused Naviter reserves the right to determine if repairs are to be done under warranty or at a nominal charge As a proof of activated warranty you must send a copy of the purchase invoice 13 Technical specification Processor ARM 11 500 MHz RAM Flash 128 MB 4GB Battery 1800 mAh Li Po 3 hrs 135 x 86x 14mm _5 3 x 3 4 x 0 55 inch Connectivity _USB 2 0 Serial BT Expansion slot microSD HC _5 inch TFT LCD Resolution _480 x 272 pixels Portr
6. tion cccscccccsesssssssssseeeeeeees 14 What s in the box Your Oudie was delivered in a sealed package with the following items 19 500 ALS U Se Oudie USB data cable Wall charger Car charger Serial cable and 12V charger cable Cradle Suction cup mount CD ROM Getting started manual Getting to know Oudie VHG ST PWN P Power On Off button Power indicator Earphone jack microSD card slot Mini USB port Stylus Speaker Reset key Turning Oudie on and off To turn the Oudie ON press the power button for 1 second To turn the Oudie OFF press the power button for 1 second while the device is running To reboot press the reset button on the back of the device Charging the battery There are several ways to charge Oudie s internal battery 1 Connect the wall charger cable to AC 110 240 V power source and insert the connector to the mini USB slot on the Oudie Connect the car charger to the DC 12 24 V source and insert the connector to the mini USB slot on the Oudie Connect the Power and Serial data cable to DC 12 V power source and insert the USB connector to the mini USB slot on the Oudie The Power indicator light indicates charging status of the Oudie Green light means that the device s internal battery is fully charged Amber light indicates that the battery is charging Internal GPS reception Oudie has an integrated GPS receiver which delivers navigation data
Download Pdf Manuals
Related Search