dts1 scoreboard operating instrustions
Contents
1. BATTERY 7 For AC connection use only the AC adapter 9V supplied with ee ae the unit Verify the power rating indicated on the adapter is the same as the AC power supplied in your location Plug the adapter into the socket on the right side of the scoreboard as shown in Figure 3 The digits will light up automatically and be ready for setting SIZE D 4X1 5V SIZE AAA 4X1 5V BATTERIES J BATTERIES Fig 4 Fisi Fig 5 When AC power is not available insert four D size batteries into the battery compartment on the back of the scoreboard as shown in Figure 4 When using battery power the ON OFF SWITCH should be used to turn the scoreboard on and off If the batteries are left in the scoreboard during AC operation they serve as a back up in the event of AC power interruption PUSH amp OPEN The batteries for the remote control can be inserted as shown in Figure 5 12 00 VIS g Loc g Fig 6 0 Fig 7 TIME SETTING From the Time Display Mode with display as shown in Figure 6 Press and hold lt MODE gt for 3 seconds to go to the Time Setting Mode with display as shown in Figure 7 In this mode press lt SET gt once for time setting and the time digits will blink Adjust the minute by using the lt TEAM 2 gt and the hour by using the lt TEAM 1 gt When time is set press lt SET gt for exit to the Time Display Mode COUNT UP MODE When the scoreboard is in the Time Display Mo2. press the center of both lt TEAM 1 gt and lt TEAM 2 gt together for 5 seconds When the screen is displaying hour adjusted C UP or C dn the scores cannot be CARE OF YOUR SCOREBOARD CHANNEL DESIGNATION Each packing box main scoreboard and remote control box are labeled with the color codes of one of the four preset RF channels yellow green blue and orange Each set should have the same color code You are suggested to choose different label set for purchasing 2 to 4 set in order to avoid interference If you wish to purchase more than 4 sets you can adjust the scoreboard to a different channel by opening the backs of the remote control and the lowest compartment of the scoreboard and change the 4 position mini toggles to a different position Make sure that both of the 4 position mini toggles are set to identical ON OFF positions otherwise the unit will not work A maximum of 16 different settings can be achieved WATER RESISTANCE The scoreboard is not water resistant so it should be kept and used in a dry location For outdoor use avoid contact with water or rain TEMPERATURE Do not leave the scoreboard in direct sunlight or in very high temperatures for an extended time as the display may become black Do not leave the scoreboard in very low temperatures as this may result in slow moving digits The above conditions will be corrected when the scoreboard is returned to normal temperatures SHO
3. CKS Be careful not to drop the scoreboard or hit it against hard surfaces as it may cause mechanical damages MAGNETISM Not affected CHEMICALS Do not expose the scoreboard to solvents such as gasoline alcohol cosmetic sprays cleaners paints etc as they may cause damage to the scoreboard BATTERY CHANGE when powered by DC When the display becomes dim or blank or the remote control does not function battery replacement is necessary Replace with alkaline battery size D 1 5 V for the scoreboard and alkaline size AAA 1 5V for the remote control Remove the batteries from the scoreboard and remote control when not being used for an extended time over 3 months TROUBLESHOOTING If for any reason the scoreboard does not function contact your dealer for an authorized service center Do not try to repair it yourself www digisportinstruments com 4
4. DTS1 SCOREBOARD OPERATING INSTRUSTIONS FEATURES 24 hour clock display 0 perteekes Count up timer with range to 9 hr 59 min 59 sec VIS KpE Presettable countdown timer with loud beep ae ie een Large 4 inch LCD digits for viewing from as far away as LOC Z 150 feet p Loy RF remote control no cords required Displays scores of two teams up to a maximum score of 199 Powered by AC adapter included or batteries four D size not included Wall mounted or free standing 16 different RF channels user adjustable to another channel to avoid interference with nearby units Fig 1 LIST OF ACCESSORIES g Scoreboard A wT oe Remote control with four AAA batteries x i Tripod rod i Fig 2 re AC adapter For indoor use only Instruction manual HOW TO OPEN NAME PLATE DOORS Use a suitable screwdriver to open the side doors as shown in Figure 2 Do this carefully so as not to damage the plastic side doors This will allow the removal or insertion of the nameplates and advertisements MOUNTING THE SCOREBOARD Fig 3 The scoreboard can be mounted on the wall by the means of two screws hooked into the eyelets on the back of the top housing Make sure the 4 screws are securely fixed in the wall The scoreboard can also stand alone ify on the floor or on a table using the tripod rod secured to the back of the 7 scoreboard as shown in figure 3 POWER UP k k N ON OFF switch
5. de press and hold lt MODE gt 3 seconds and repeat this action once more It will enter the Count Up Mode with the display showing C UP as shown in Figure 8 Press lt SET gt once and 0 00 00 will be displayed Press lt START STOP gt to start and press again to stop the count up timer After timing is stopped press and hold lt SET gt 3 seconds for resetting to zero COUNT DOWN MODE When the scoreboard is in the Time Display Mode press and hold lt MODE gt 3 seconds and repeat this action twice to enter the Count Down Mode with the display showing C dn as shown in Figure 9 Press lt SET gt once to enter SET COUNT DOWN MODE The previously set countdown time digits will be blinking Press lt TEAM 1 gt to adjust the minutes and hours Press lt TEAM 2 gt to adjust the seconds When the countdown period is set press lt SET gt once and the time will be stored in memory The countdown timer can be started and stopped by pressing lt START STOP gt At 0 00 00 the scoreboard will give a long beep to indicate that the time is up The countdown period can be reset to the memorized period by pressing and holding lt SET gt for 3 seconds If setting of countdown period is desired at this stage press lt MODE gt momentarily to enter SET COUNT DOWN MODE and set using the lt gt Buttons as before THE SCORE ae uP vs O toc 0 Fig 8 Fig 9 For resetting the score to zero
Download Pdf Manuals
Related Search