Pre-Flight checklist
Contents
1. O O O O O O O O Pre Flight checklist Follow these steps to setup and ready the Phantom for flight Check Flight area o Are you allowed to be in and fly at your location o Observe obstacles such as power lines trees buildings etc o Isit safe to fly here are there other people or objects that could be damaged in the area Attach monitor to controller mount using included screw Attach antenna to remote controller Blue tape on black antenna Install antennas on monitor Red tape sides do not matter Install TX antenna on Phantom craft Yellow tape right angle adapter so that the antenna is aiming down and slightly to the left to clear the ground IMPORTANT never power on the aircraft without the TX antenna installed Doing so can damage the transmitter unit Power on controller making sure both Left and Right toggles are in the Up position Check battery charge by pressing on button once only fly using fully charged batteries Insert battery into Phantom Power on Phantom press the button on the battery once then press again and hold for 2 seconds Calibrate compass perform before every flight see user manual for instructions on how to calibrate Make sure GoPro is powered on press front button and recording top button DO NOT FLY UNTIL Phantom lights indicate Ready to Fly status by showing all blinking green lights only Once ready to fly is achieved start motors by moving both control stick2. s down and to the center Raise the phantom to about 8 10 feet off the ground and release the control sticks Confirm o Lights on Phantom do not indicate an issue o Light on controller does not indicate an issue o The craft is staying in about the same place on its own o NOTE if any of the above are not true land and end the flight immediately Enjoy your flight Please ensure that the aircraft is visible at all times
Download Pdf Manuals
Related Search