Home

Specifications

1. Width 17 9 cm 4 5 inch Depth 16 51 cm 6 5 inch Module Removal Clearance 16 5 cm 6 49 inch General Installation Specifications Power It is recommended that the unit be connected to the vehicle ignition Battery power is used only when the vehicle is running The unit could drain any vehicle battery over time if the ignition is not turned off or if the system is not powered properly to the vehicle power panel This document contains proprietary and copyrighted information subject to change without notice The information in this document shall not be duplicated used or disclosed in whole or in part outside of Eye3Data 2006 2011 Any distribution of this material without the written consent of Eye3Data is strictly prohibited Eye3 Witness Pro In Car Video System Specifications Connection Connect only to appropriate power supply and ensure proper grounding of the circuit Use of Relays is encouraged for power supply and wired sensors to prevent fluctuations in power supply which could adversely affect the Eye3 Witness Pro mobile unit Moisture Protect unit and connections from environmental sources of moisture and liquid spills Temp Do not install where unit temperature will exceed F140 F 60 C fall below 20 F 28 C or store the unit where temperatures rise above 175 F 80 C Avoid direct exposure to sunlight Ventilation Provide sufficient ventilation with a minimum of 6 inches cooling clearance to ensure
2. Eye3 Witness Pro 5 1 5 2 5 3 EYE3Evidence The Analysis software is a dashboard driven application that allows the user to analyze a recording clip downloaded by either of the 4 methods of download Depending on the type of download the unit generates either a CAR or M65 or p10 p11 p12 or p13 file Any of these files may be opened in the Analysis software to get a view of the Video Audio GPS location Speed Event Data Inertia Sensor data etc The Eye3 Witness Pro unit can be configured to record data in increments of 15minutes 30 minutes or 45 minutes When data is downloaded using either of the 4 methods of download the data file contains the pre defined minutes of video data It is recommended to set the Eye3 WITNESS PROto create data in 15 minute packets The Analysis playback software works with different kinds of mapping software to display the vehicle location The Google version of the software requires an internet connection and enables the customer to track the vehicle across county city and state lines The Google maps version is licensed and available at an incremental cost EYE3Remote The Remote Management Software provides the customer the ability to remotely view cameras inside the bus over a Wireless connection To access the Remote management software the bus either has to be in a WIFI network or a cellular network To access video audio data via a Cellular network a separate WIFI card from either SPRIN
3. Label IV GPS Coordinates V Date VI Time VII Sensor label 4 2 Play Events a The system allows users to select from a display of sensor triggered events The user can scroll down find the event to play and press ENTER b The Event display screen would display the event date the event was created time the event was created and Sensor Type or what triggered the Event c While the video is playing the system has the capability to display associated text on the channel The following text can be displayed on the screen Driver ID Vehicle ID Camera Label GPS Coordinates Date Time 7 Sensor label The same criteria will be used later in the Query amp Reporting section Users will be able to query extract video and audio data based on the criteria mentioned above Age wn e This document contains proprietary and copyrighted information subject to change without notice The information in this document shall not be duplicated used or disclosed in whole or in part outside of Eye3Data 2006 2011 Any distribution of this material without the written consent of Eye3Data is strictly prohibited Eye3 Witness Pro In Car Video System Specifications 5 Eye3 WITNESS PRO Data Management Software The Eye3 WITNESS PROsystem is accompanied with an extensive list of applications to Download View and Analyze Video and Event data and produce Ad Hoc Management Reports Following is a list of applications packaged with the
4. are recorded in the 50 byte video filename while the other are pulled out by our codec processing engine Below is an example of a decoded file name File 1 0000000000000000 100812 041507 043007 12u212000000 264 Channel Name Driver Name 0000000000000000 Clip Date 08 12 10 Clip Start Time 04 15 07 am Clip End Time 04 30 07 am Type NTSC Resolution CIF Frames Per Second 30 Recording Mode Alarm Recording Protected Yes Channel 2 Global UID 27A11E23 C30E 4EBF AE8F 8CF53AEF9004 The channel name and driver name sections are defined in the DVR and are customizable These are hard coded into the DVR via a firmware menu system The data and time stamps are generated via the internal clock of the DVR This clock can be synchronized via GPS or NTP NTP recommended for Delaware State Police application The following fields freeing to the video data is also derived from the DVR s configuration As you can see this particular file was generated through channel camera 2 at 30 frames per second and using event based recording Once the file is generated the DVR acts as the active storage device for vehicle when the vehicle returns to the depot or yard the stored files are transferred wirelessly to the Auto Download FTP Server The Auto Download Server stores the files in a tree style directory structure as follows This document contains proprietary and copyrighted information subject to change without notice The information
5. in this document shall not be duplicated used or disclosed in whole or in part outside of Eye3Data 2006 2011 Any distribution of this material without the written consent of Eye3Data is strictly prohibited Eye3 Witness Pro In Car Video System Specifications lt drive letter gt lt storage location gt lt vehicle id gt lt date gt lt channel gt lt file_name nvr gt Incomplete downloads are automatically flagged and restarted when the vehicle returns the next time This ensures complete data integrity even in the case of an emergency or shortened down time Our Auto Download Server handles the job of extracting the video data and saving it to a central server while an FTP routine handles extraction of log and metadata files and places in the same location with respect to device vehicle Each device has its own folder containing video data and the unparsed log and metadata files Our Data Management Engine takes control at this point When new files are introduced to the system our Data Management Engine examines new information processes the data and inserts it into an SQL database This database contains several tables including vehicle information driver information device information metadata information video data information and other calculated fields SQL Database contains the following tables Vehicle vehicle_id make model year plate_num etc Driver driver_id first last dob contact_info_fields hir
6. proper operating temperature for the unit Vibration If necessary provide additional shock mounting to prevent damage and wear by excessive vibration Clearance Front clearance of 16 5 cm or 6 49 inch is required to slide the recording module from the mounting assembly Wiring Install where mounting assembly wires have sufficient clearance and will not be crimped or subject to wire insulation damages due to vibration Access Secure the Eye3 WITNESS PROunit so that passengers or drivers cannot tamper or damage the unit cameras wires or other accessories Do not mount where access to any other vehicle component will be restricted Injury Install the unit cameras accessories and wires so that no injuries can be caused through impact with equipment during vehicle operation Ensure that all transportation regulations are followed to avoid passenger injury should they come in contact with the installed equipment This document contains proprietary and copyrighted information subject to change without notice The information in this document shall not be duplicated used or disclosed in whole or in part outside of Eye3Data 2006 2011 Any distribution of this material without the written consent of Eye3Data is strictly prohibited Eye3 Witness Pro In Car Video System Specifications f Eye3 WITNESS PRO Technical Schematic Layout Please refer to the wiring diagram of I O Extended Box To Amplifier of the Station Announc
7. 6 NO or NC depending on usage amp Configuration Sensor 7 NO or NC depending on usage amp Configuration Sensor 8 NO or NC depending on usage amp Configuration X Sensitive g 0 2 Y Sensitive g 0 2 Z Sensitive g 0 2 Speed Source GPS if available or Odometer This document contains proprietary and copyrighted information subject to change without notice The information in this document shall not be duplicated used or disclosed in whole or in part outside of Eye3Data 2006 2011 Any distribution of this material without the written consent of Eye3Data is strictly prohibited Eye3 Witness Pro In Car Video System Specifications h Eye3 WITNESS PRO GPS Functionality Eye3 WITNESS PROGPS features are available only when the system is ordered with GPS The GPS connection port is located on the rear of the Docking Station To enable the GPS features a GPS antenna either generic or provided along with GPS unit needs to be connected to the GPS port Once connected and placed outside the vehicle facing towards the sky the GPS unit is activated GPS data appearing on the screen is limited to the following i N for Longitude ii W for Latitude iii Vehicle Speed Additionally GPS also tracks the values of the GPS N W and Speed which is embedded on the video This information can be translated using any mapping software to display the true location of the vehicle Mapping software needs to be purchased separately and is not pro
8. Eye3 Witness Pro In Car Video System Specifications Function amp Technical Requirements Document Sse IAA S 4 EYE3 WITNESS PRO This document contains proprietary and copyrighted information subject to change without notice The information in this document shall not be duplicated used or disclosed in whole or in part outside of Eye3Data 2006 2011 Any distribution of this material without the written consent of Eye3Data is strictly prohibited Eye3 Witness Pro In Car Video System Specifications Table of Contents 1 Introduction to EYE3 WITNESS PRO eee eeeeeseceseeeeeeesseeceaeceaeeeeeeesaeesaeenseesees 2 Components AI PORMIECS 04 3 scdecactinccadeenecacushedgusdcueydeeeresencnaeeuduedsneausueiesedasccadameedaumvees 2 1 System Recording Module and Mounting Assembly eee eeeceeeeeeseeeeteeeteeeees 2 2 Video and Audio DVR Features and Capabilities 0 0 ceeeeeeeeneeeseeeteeeees 2 3 Remote Connection and Download of Audio Video data for Playback 2 4 Eye3 Witness Pro Storage and Other Accessories eeeseeeseceseeeeeeeescecnaeenseeees 3 Installation amp Environment Specifications eeeeeeeseeeereeceseeseeeeeeeesseecsaeenseeees A Playback Management sc oc seccis cs siesta cteeutcdite cde so resenecucteuee vedi dene beldoreuneeedenucatawevadideaialts 41 Play IR CORI SS scssi aE aAa E A ETE 42 Play US tacts nronu aA E E E R E 5 Eye3 WITNESS PRO Data Management Software ee
9. T OR VERIZON is required The remote management software has the ability to view up to 16 buses in one single session this could equate to 1 camera each from 16 buses or a combination of cameras from a number of buses Each bus needs to have a unique static IP address which needs to be configured on RMS The Remote Management software provides the capability to change the configuration on the bus vehicle system remotely search for video audio data on the bus and download it to a local machine for viewing locally More details about the software can be found on the RMS User Manual EYE3Connect The Auto download server is installed at the facility where audio video data needs to be captured The Auto download server is an advanced application that can manage monitor and connect to multiple vehicle units concurrently depending on network bandwidth While the connection is established the server would trigger a scheduled download of Video and or events from the vehicle to the Auto download server This document contains proprietary and copyrighted information subject to change without notice The information in this document shall not be duplicated used or disclosed in whole or in part outside of Eye3Data 2006 2011 Any distribution of this material without the written consent of Eye3Data is strictly prohibited Eye3 Witness Pro In Car Video System Specifications The Auto download method of download requires a ROUTER to be insta
10. d or disclosed in whole or in part outside of Eye3Data 2006 2011 Any distribution of this material without the written consent of Eye3Data is strictly prohibited Eye3 Witness Pro In Car Video System Specifications Options Default Setting System Date Time Current date and time Date Mode MM DD YY Weekday Start Monday Weekday End Friday Time Sync NO Daylight Time NO General Unit ID 000 Record File Size 15 Idle Time 100 Time Switch OFF Video Type NTSC Audible Alarm NO for all Priority Record Disable HDD O W YES Network IP Address 192 168 0 100 Subnet Mask 255 255 255 0 Gateway 192 168 0 1 Security Yes Register Info Company Name XYZ Vehicle Number 123 Driver Name ABC Device Info 001 Camera Camera 1 Label No Label Quality 1 Audio Yes Camera 2 Label No Label Quality 1 Audio Yes Camera 3 Label No Label Quality 1 Audio Yes Camera 4 Label No Label Quality 1 Audio Yes Camera Num 04 Rate FPS 30 Resolution CIF Time Insert ON Schedule ON Everyday 00 00 23 59 Event Setup Sensor 1 NO or NC depending on usage amp Configuration Sensor 2 NO or NC depending on usage amp Configuration Sensor 3 NO or NC depending on usage amp Configuration Sensor 4 NO or NC depending on usage amp Configuration Sensor 5 NO or NC depending on usage amp Configuration Sensor
11. e_date etc Device device_id type accessories binary yes no fields last_ download Data record_guid vehicle_id driver_id device_id meta_data_fields gps inertia temp etc calculated_fields time_stamp video_index Notes From these tables our front end can query the database by any combination of columns For instance you can generate a report about all the male drivers who were active between 12am and 1am From this report you will see distance traveled idle time number of events on each sensor brakes meter etc as well as calculated inertia statistics and projected revenue From that report you can then view the video corollary to the resulting dataset There are of course report templates for things like shift statistics productivity maintenance projections etc You will also have access to each drivers profile and able to make notes regarding any of the collected data For further details on the RMS and Auto download configurations please contact our Technical support hot line at 513 770 0550 This document contains proprietary and copyrighted information subject to change without notice The information in this document shall not be duplicated used or disclosed in whole or in part outside of Eye3Data 2006 2011 Any distribution of this material without the written consent of Eye3Data is strictly prohibited
12. ement SIZ 5 al pms 1 0 E FN Extend DC8 48V ooog O wa Bees E GPS Cellular Module Q MCU Debug Attach External Antennas Power Cable GNS LNdNi IVNOIS JFUSE je Battery Ignition sesawes 0 Ajddngs 19am0g a e ea eo VTracker Wiring Diagram 1 Live View Eye3data com 3 Setup operation This document contains proprietary and copyrighted information subject to change without notice The information in this document shall not be duplicated used or disclosed in whole or in part outside of Eye3Data 2006 2011 Any distribution of this material without the written consent of Eye3Data is strictly prohibited Eye3 Witness Pro In Car Video System Specifications g Eye3 WITNESS PROSystem Tree and Default Settings ALL FILES GENERAL REGISTER INFO EVENT FILES FORMAT UPGRADE USER SECURITY i OCR I SYSTEM CONFIG SYSTEM LOG OPTIONS OSD OVERLAY RECORD CAMERA SETTING RECORD SETTING SUB STREAM SCHEDULE NETWORK 3 OTHER SETTING LOCAL SERVER WIFI MOBILE NETWORK SENSOR SENSOR OUT SPEED PERIPHERAL ACCELERATION TEMPERATURE EYESMOBILE FIRMWARE MENU CAMERA VOLTAGE SYSTEM aa EMERG ALARM VOLTAGE HISTORY EMERG ALARM MODULES This document contains proprietary and copyrighted information subject to change without notice The information in this document shall not be duplicated use
13. f g h i j k 1 m n 0 Eye3 Witness Pro has been designed with an ultra compact case extremely low weight high temperature resistance and vibration resistant The system runs on low voltage low current architecture suitable for mobile mounting buses cars vans trucks trains etc or fixed locations Quick release and removable recording module with tamperproof lock and secure controls Individual wire connections for Audio Video Power Inputs Outputs and accessory assemblies 8 V 36 V DC output 12V 3Amp regulated power for use with cameras inputs outputs and accessory assemblies Full support of NTSC or PAL video inputs and outputs Audio channels Communications supported through Build in 3G EDGE CDMA WIFI for wireless Transmission TCP IP network interface and USB connection to PC s Handheld IR Controller with On Screen Display OSD for all operations of Eye3 Witness Pro Solid State Drive 2 5 in mobile anti vibration and shock resistant HDD ranging from 80G to 250G Video and Audio DVR Features and Capabilities Eye3 Witness Pro comes in 4 channels Video Audio with H 264 Wireless Transfer Dual streaming transfer for each channel to provide the excellent recording performance 4 channels for video input full motion 30FPS Camera continuous or priority video recording and live display Support 1 channel Real time D1 4CH D1 at 12 fps 15fps 4 channels of high fidelity digitally recorded synchronized a
14. istribution of this material without the written consent of Eye3Data is strictly prohibited Eye3 Witness Pro In Car Video System Specifications p q r 2 3 a b c d e f b 2 4 a b c d e The system includes a buffer memory for pre event recording only The buffer is programmable through the system set up menu to be capable of capturing up to 15 minutes of video prior to the recorder being activated The buffer time is adjustable The system shall have available a crash record activation feature that creates an EVENT when involved in a collision Please refer to Inertia Sensor Module as an accessory The system is able to protect recorded Events to insure that they are not recorded over or erased Remote Connection and Download of Audio Video data for Playback Handheld Infra Red controller with OSD for quick access to recorded video and setting menus USB Connection for file transfer PC based file transfer and settings management PC based client software for live viewing playback video playback events associated video and downloading capabilities Eye3 Witness Pro has the capability of downloading data in multiple methods and sizes Video and Audio data are synchronized stored in incremental packets of 15minutes 30 minutes 45 minutes or 60 minutes Video and Audio data can be downloaded in 4 ways i Wireless download if the vehicle is detected in a WIFI zone ii Download of Eve
15. lled in each vehicle and either a one or more ACCESS points installed in the administrative building When a vehicle arrives at the location garage and turns the ignition off a wireless connection is established between the vehicle and the Access Point Depending on the auto download server configuration the bus can download either ONLY EVENTS or VIDEO and EVENTS to the auto download server Typically customers are interested in downloading only EVENTS taking into consideration the network bandwidth available on the wireless network Each Vehicle that arrives is added into a queue and video data if any events are available is downloaded on a FIFO First come first serve basis 5 4 EYE3Dispatch This software is primarily used by a central monitoring facility to view live video or playback from a remote location typically via a wireless network The CMS software allows the vehicle and the administration to communicate via SMS or Instant Video Alarm Notifications CMS include remotely live view record file download local recording GPS tracking and playback strong log system and vehicle group management 5 5 Eye3 WITNESS PRO Management Reporting Our Eye3 Witness Pro while acting as a fully functional digital video recorder also has the capability to record a wide array of sensor and event data These special data sets or metadata are embedded in our secure proprietary video format in two ways Portions of this metadata
16. lso be used to wirelessly download video and or events data to a remote AUTO DOWNLOAD Server This is an optional accessory and may be replaced by a generic Wireless Router available in any electronics store Eye3 Witness Pro can also be monitored remotely using build in 3G and CDMA networks provided by Verizon Sprint and AT amp T A static IP address is required to facilitate this advanced feature An external Wireless G Router for Mobile Broadband can be attached to the Eye3 Witness Pro unit to allow remote viewing of the cameras Installation amp Environment Specifications Eye3 Witness Pro uses only regulated 12 volt DC or 24 volt DC 2 3 Amps certified power supply for installation in vehicles The unit can handle power ranges from 7v 28v DC Do not attach powered input leads that exceed 12 volt DC at 1 5 Amps OR 5 volt DC at 1 5 Amps supply on any one connection Eye3 WITNESS PRO unit may be operated in a totally sealed enclosure with no cooling airflow ensure that the operating temperature of the unit does not exceed 140 F 60 C or that the standing temperature does not exceed 175 F 80 C The minimum operating temperature for the Eye3 WITNESS PROproduct is 20 F 28 C If the minimum temperature is expected to exceed connect an auxiliary heat source Eye3 WITNESS PRO Dimensions Main Unit Height 2 25 Width 6 Depth 7 5 Weight 2 6 lb Recording Module Removable Component Height 4 6 cm 1 25 inch
17. nt Data to a USB Thumb Drive iii Download of audio video data to a laptop iv Removing cartridge from the docking station and carrying it to the administrative office for download Eye3 Witness Pro has the capability to enable a live view or playback audio video inside the vehicle using its Remote Management software a laptop must exist in the vehicle to use this facility Eye3 Witness Pro Storage and Other Accessories Eye3 Witness Pro can store either video and audio data on Solid State Drive 2 5 or eSATA removable hard drives of capacities ranging from 60 Gigabyte 1 Terabyte Eye3 Witness Pro unit comes with a removable HDD Drive storage which is locked into the main unit prevents removal of the actual HDD Caddy except by authorized individuals with a key A GPS version of the unit is required to take advantage of the GPS tracking features of the Eye3 Witness Pro Lock Box The entire Eye3 Witness Pro unit is stored neatly inside a keyed lock box The Lock box is a ventilated Steel case that prevents unauthorized access to the Eye3 Witness Pro Inertia Sensor The Eye3 Witness Pro unit can be connected to an Inertia Sensor Module This external device monitors the X Y Z co ordinates of the bus Sensitivity levels of the X Y Z co ordinates are pre established The unit senses deviations to the X Y Z co ordinates and creates Alarms Event notifications of drastic changes to the X Y Z co ordinates The Inertia Sensor module i
18. nt to be played The system will play the pre event recording up to 15 seconds and then the post recording up to 300 seconds 4 1 Play Recordings a The system allows users to enter specific dates for the playback The oldest record time is a quick reference for the oldest recording available on the unit Enter the date and time using the handheld IR Controller and press START This document contains proprietary and copyrighted information subject to change without notice The information in this document shall not be duplicated used or disclosed in whole or in part outside of Eye3Data 2006 2011 Any distribution of this material without the written consent of Eye3Data is strictly prohibited Eye3 Witness Pro In Car Video System Specifications b A calendar function is also available which displays in yellow days for which recording is available Blue color indicates no recording c While the selected Video is playing back user can select the camera number 1 2 3 or 4 on the remote menu or the control panel to jump to the specific time in the clip d The system is capable of downloading data to a CF card while in playback mode The data file created on the CF Card is a M65 format and can be opened in the Analysis software e While the video is playing the system has the capability to display associated text on the channel The following text can be displayed on the screen I Driver ID II Vehicle ID IHI Camera
19. s used to monitor Driver behavior prior to the time of incident Inertia Sensor module can be use to capture outside temperature environment with Low and High Temperature events Remote Control Head is an optional accessory that is primarily used by Law Enforcement and other Emergency type vehicles along with an LCD display The primary purpose of the Remote Control head is to allow the operator to view live and preview earlier recordings The Eye3 Witness Pro has 1 USB port in the front of the unit to download event data directly to a laptop or to upload revisions to the firmware on the Mobile unit This document contains proprietary and copyrighted information subject to change without notice The information in this document shall not be duplicated used or disclosed in whole or in part outside of Eye3Data 2006 2011 Any distribution of this material without the written consent of Eye3Data is strictly prohibited Eye3 Witness Pro In Car Video System Specifications g h a b c d e A build in WIFI Module optional is available and can be installed to enable wireless connectivity with remote locations The WIFI module will be effective only while the bus is in a WIFI Hot zone A Remote Management Software RMS will be required on the Remote end to establish connectivity with the vehicle and obtain a live view of cameras Remote Management Software details will be provided later The WIFI 802 11g module will a
20. seseeseeereseeeresressrrererrerseree 5l EE arcs acess eonienenersedtries aera aeiae aeie EE EEAS EEES Ded EBYE3ReMOtE soediatscedeeheetens tatcacacsaticuis a eccncetiaadendincsacgvaaccaees Muceede ranted eaters eaentale ie IO ol 6 10 Meee cere eee Eee rennet nes Hein re Tne tree rn ere cere 5 4 EVES DIS pate ss sonoros niri i a EE E EEE E Aa 5 5 Eye3 WITNESS PRO Management Reporting ee eeseeeseceeeceeeeeeseeenaeenseesees This document contains proprietary and copyrighted information subject to change without notice The information in this document shall not be duplicated used or disclosed in whole or in part outside of Eye3Data 2006 2011 Any distribution of this material without the written consent of Eye3Data is strictly prohibited Eye3 Witness Pro In Car Video System Specifications 1 Introduction to EYE3 WITNESS PRO Eye3Witness Pro an Enterprise Class Digital Cruiser Video Solution offers capabilities to record and view 4 cameras for a multitude of applications The product has the ability to scale up to 1 TB of storage record up 30FPS and provide unparalleled video quality A strong back end data management system robust suite of applications and easy to use playback analysis software make Eye3 Witness Pro one of the most widely accepted Mobile Video Solutions Components and Features 2 1 System Recording Module and Mounting Assembly a b c d e f g h i 2 2 a b c d e
21. udio matched to 4 video channels Continuous recording is available while in playback mode User Friendly criteria to playback only events associated with the Video Automatic timer to resume the live display if the unit is idle for a user defined timings Linux 2 6 Embedded with H 264 video compression for high quality low storage recording and playback Support powerful CMS Central Monitoring System for superior live view GPS tracking and alarm information User Selectable settings for quality and audio record enable disable for each video channel 12v Power supply for multiple devices such as cameras sensors relays and other accessories Selectable frame rate with event triggered burst recording speeds up to 30 FPS Camera Total 19 Sensors There are 8 alarms Inertia Over Speed Low Speed Motion Camera Blind Video Loss Ignition and 2 Relay sensor output with selectable pre alarm and post alarm recording times Dedicated Panic button provided to driver at all time for emergency alarms TV output channel for live video and recorded video viewing There are no buttons in the front of the unit to view modify or erases the recorded data All access is provided using client software and with proper authentication This document contains proprietary and copyrighted information subject to change without notice The information in this document shall not be duplicated used or disclosed in whole or in part outside of Eye3Data 2006 2011 Any d
22. vided with the Eye3 WITNESS PROunit Eye3 WITNESS PRO PTZ Functionality The Eye3 WITNESS PROcan support PTZ Pan Tilt Zoom cameras and control via the IR Remote control via the RS 485 RS422 port located on the rear of the Docking Station a All 4 or 8 channels can have PTZ cameras b Supports 16 protocols which include Pelco D Pelco P DSCP FastDome PIH 1016 PIH 1017 and Pelco06 to Pelco15 If a corresponding protocol is not found in this list please contact us directly We can provide technical support to add the missing protocol if PTZ details are provided Eye3 WITNESS PROMini LED Display On most occasions the Eye3 WITNESS PROunit is installed either in the overhead panel or underneath the driver seat In both instances the unit is not visible to the driver Eye3 WITNESS PROMini LED Display is installed on the dash board of the vehicle providing bus driver information related to the vitals of the Eye3 WITNESS PROUnit The unit consists of red and green LED s for Power HDD Record Video Loss Audio Loss and Alarm The unit is always visible to the driver and is able to provide customers advanced notice if the system is not functioning properly Playback Management The Eye3 WITNESS PROhas a very simple and easy to use Playback Management System The system plays back recordings in 2 ways a View list of recordings select the date time of recording and Press START b View list of Events in the Event Folder and Select Eve

Specifications

Contents

Download Pdf Manuals

Related Search

Related Contents