Instructions - 100kb - pdf
Contents
1. mercury LPSA70 90 Auto Voltage Selection Laptop Power Adaptor Item ref 661 130UK 661 131UK User Manual CAUTION The appliance is not intended for use by children or infirm persons without supervision Please read through this manual carefully before use This manual is guidance for how to use the Mercury 70W LPSA70 90W LPSA90 auto voltage selection laptop adaptor Specification LPSA70 LPSA90 15 20Vdc Auto Max Current Output 3 60A 4 62A LED display At auto operation status slider at AUTO Auto Search Blue LED Flash Blue LED on Standby LED off Blue and Green LED on at the same time At manual select status Slider at 15 16V 19 5V Green LED on Standby LED off AUTO mode At auto mode device will automatically detect and select the required working voltage for the laptop connected 1 Connect the AC power to device both Blue and Green LED will lit once to indicate de device is powered up properly 2 Push slide selector to AUTO if not already done so the Blue LED will lit for 2 seconds and off 3 Select the tip that is compatible with your laptop and connects it to the DC output tip the fixed tip on this product is 5 5 x 2 5mm 4 Connect the device to the laptop the Blue LED will lit for 2 second and start flashing this indicates the product is searching for the correct required working voltage for the laptop When the Blue LED stay lit the device is working at t2. game This Crossed Wheelie Bin symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life The goods must be disposed of according to your local council guidelines Errors and omissions excepted Copyright 2013 AVSL Group Ltd Www avsl mercury com an envi group brand
3. he correct required voltage 5 When laptop is standby or switched off the device will enter standby mode too This indicates by the LED remained switched off When the laptop is switched on on the next use the device will automatically switch back on 6 This device will only require search for working voltage once and remember the voltage as long as it remained plugged in with power To establish a new search for different laptop unplug the device from Www avsl mercury com an ens group brand mercury the wall for 1 minute and plug back in The Blue and Green LED will be lit together for 3 seconds to indicate memory erase Repeat process one to search for the right working voltage for the new laptop Please note device may remained standby when connected to certain model of laptop at power off this may require switch on the laptop to start the device Please refer to Manual Operation if device remained standby When laptop is switched off the device will remain working until the battery is fully charged before automatically switched off to standby mode MANUAL mode Manual mode will allow to selector working voltage of 15 16V or 19 5V js 2 Connect the AC power to the device the Blue and Green LED will light once to indicate the device is powered up Refer to the bottom of the laptop for the operation voltage required and push the slider to the appropriate voltage for the laptop For voltage between 15 16 5V p
4. lease push slider to 15 16V for voltage between 18 20V please push slider to 19 5V please ensure the working voltage required is within the adaptor s working voltage range Select the tip that is compatible with your laptop and connects it to the DC output tip the fixed tip on this product is 5 5 x 2 5mm Connect the device to the laptop the Green LED will be lit to indicate it is working and supplying power to the laptop When laptop is standby or switched off the device will enter standby mode too This indicates by the LED remained switched off When the laptop is switched on on the next use the device will automatically switch back on Please note if laptop is connected with the wrong selected voltage this may cause the laptop unable to start up properly Remove the device and battery from the laptop for 10 seconds Reinstall the battery and connect the laptop at the correct voltage again will allow the laptop to start properly again Important Notice Only use DC tip supplied with the device use of any other tips may cause damage to device and laptop When not intended to use for a long period of time please unplug the device from the main Device temperature may increase when operating Please avoid locate device on cotton fiber leather and fur material etc which may cause damage to the device Do not disintegrate device Operation ambient temperature 0 C to 25 C Storage temperature 20 C to 60 C
Download Pdf Manuals
Related Search