MANUAL- UR700QVAC.indd - Uni
Contents
1. USER MANUAL UR 700QVAC and UR700QVAC H AUTOMATIC WET DRY DUSTLESS VACUUM SYSTEMS www uniram com REVISED 2016 02 MANUAL AUTOMATIC DUST VACS UR700QVAC Revised 2016 02 Follow the procedures in this manual to operate this machine safely and effectively Ensure that this manual is readily available to the operator at all times If you have any questions about the operation of this machine contact North America Uni ram Technical Service 1 800 417 9133 Other Continents Contact Your Supplier FEATURES AND SPECIFICATIONS The UR700QVAC is 120 V 2000 W 50 60 Hz and the UR700QVAC H is 240 V 2000 W 50 60 Hz These mobile vacuums are ideally suited for automotive marine and industrial applications wherever air operated vacuum assist tools are used Two technicians can work on different projects at the same time e Portable e A Single Cartridge Filters is standard High Density Filters are available e One or two operators can work simul e Electrical outlet for use with one electrical sander taneously 20 foot power cord 16 foot vacuum hose e Automatic activation of vacuum by air Sealed Vacuum 99 water 2500mm tool manual override e Supply air pressure 100 150 PSI 6 510 0 bar e Weight 700 72 lb 33 kg e 2 motors 1 000 W each Select single or Motor is a bypass 2 stage motor for long life and va dual vacuum motors single 1 000 W cum power Diecast housing Internal fan for cooling and dual 2 02. if a part is found to be defective in material or workmanship as determined by factory service personnel The items listed below under Conditions of Warranty as consumables are not covered Uni ram reserves the right to direct the customer to ship the unit collect to the Uni ram factory or to an approved Service Center for repair using the Uni ram Return Goods Procedure or to repair the unit on site To prevent damage in transport the purchaser must ship the unit in the original packaging or use alternate adequate packaging All units must be shipped clean and free of solvent Conditions of Warranty As Uni ram Corporation has no control over the working conditions or circumstances under which the purchaser stores handles or uses the product Uni ram makes no war ranty or claim either expressed or implied with respect to this product s fitness for any purpose or the result to be obtained from its use This condition applies to the sale of all products and no representative or distributor of Uni ram Corporation has the authority to waive or change these conditions This warranty applies only to the original purchaser and does not apply if the unit has been misused overloaded neglected altered or used for any purpose other than those specified in the operating and installation instructions Deterioration due to normal wear is not covered by this warranty Damage due to accident transportation fire floods or acts of God is also not cove
3. 00 W Maximum decibel rat e Shipping Dimensions WDH 41 X 23 X 24 ing at 2 000 W is 70 db Wattage power consumption can be reduced using the Variable Power Adustment dial CAUTIONS AND WARNINGS Do not use this vacuum with hazardous dust such as alumina and magnesia dust and do not use with flammable liquids like gasoline Repair must be carried out by a qualified technician PREVENTATIVE MAINTENANCE 4 replacement brushes come with the vacuum When To Replace Brushes The brushes are rated for 500 hours Replace the brushes at the earlier of the first sign of wear or 500 hours of use The sign of wear is indicated when the vacuum motor periodically stops unexpectedly How to Replace the Brushes See the instructional video on the Uni ram website www uniram com Go to the tab Miscellaneous then Testimonials then Industrial to locate the video MANUAL AUTOMATIC DUST VACS UR700QVAC Revised 2013 12 SETUP e Check for transportation or handling damage e Make sure the Vacuum Head is securely clamped e The Pressure Switch is in a separate carton Install the Pressure Switch Connect the Short Power Cord from the Presure Switch to the Control Panel connector on the Vacuum Head Make sure the connection is secure e Install 1 4 npt male air plug to the the female air inlet on the pressure switch e Connect the two Air Supply Lines and two Vacuum Hoses to the Pressure Switch e Provide at least 100
4. PSI 7 bar supply to the air plug on the pressure switch To ensure dry air use a moisture filter not provided e Connect the Air Tools e Make sure the correct voltage is supplied Plug in the unit Set On Off control to Auto Test the operation of the vacuum and sander Ensure all air fitting connections are secure without air leakage CONTROL PANEL AUTOMATIC SINGLE SHORT POWER CORD OPERATION FROM PRESSURE SWITCH 1 ON OFF CONTROL AUTO allows the unit to be turned on and off from the Sanding Tools OFF turns the unit off and prevents the Sanding Tools from turning it on MANU turns the vacuum on only 2 SINGLE OR DUAL MOTOR OPERATION 3 VARIABLE SPEED CONTROL The motor speed is ajustable using the Variable Power Adjustment dial MANUAL AUTOMATIC DUST VACS UR700QVAC Revised 2016 02 WET OPERATION An optional kit is available to allow water to be vacuumed Part No 27 710 However to prevent water damage to the filters they must be removed during wet use The unit should then be thoroughly dried before using it on dry materials CAUTION TO PREVENT AN EXPLOSION OR FIRE DO NOT VACUUM FLAMMABLE LIQUIDS CLEANING THE FILTERS and EMPTYING THE CANISTER To keep the vacuum operating efficiently clean the bag filter and empty the canister frequently Clean the cartridge filter periodically Replace the bag filter and cartridge as required Unplug the unit and detach the short Power Cord from the Pressure Swi
5. he filter to remove the dirt e Let the filter air dry then reassemble CARTRIDGE FILTER BAG FILTER MANUAL AUTOMATIC DUST VACS UR700QVAC Revised 2013 12 TROUBLE SHOOTING GUIDE ACTIVATION OF VACUUM Vacuum does not start when Set Auto Off Manu switch to Manu setting If it sander starts does not start call Factory If it starts Set Auto Off Manu switch to Auto set ting Ensure short Power Cord connected to the Pres sure Switch is firmly attached Ensure shop air supply is at least 100 psi Adjust air control on sander to full open Test If Sander does not turn on check with a different sander Vacuum does not stop once An air leak can cause the problem Check for com sander is turned off pressed air leakage at fittings along air line from air supply to sander Secure connections Use teflon tape Vacuum turns on without Check for air leakage at fittings along air line from activating sander supply to sander Secure connections Use teflon tape REPLACEMENT PARTS MANUAL AUTOMATIC DUST VACS UR700QVAC Revised 2016 02 Full Product Warranty These Uni ram products have been engineered and manufactured to high performance standards Each unit has been subjected to detailed factory testing before shipment This product comes with a one year full warranty from the date of purchase Uni ram Corporation reserves the right to repair or replace the unit free of charge to the original purchaser
6. red Units whose serial numbers have been altered or re moved are not covered Unauthorized attempts at self repair or alterations by the owner also invalidate this warranty Interior or exterior finishes are not covered by this war ranty Consumable Items are not covered by this warranty This warranty replaces all other warranties expressed or implied by statute or otherwise To make a claim call Uni ram Service at 1 800 417 9133 and quote the serial number of the unit
7. tch on the vacuum head unclamp the Head and lift it completely off the Canister To clean the Bag Filter e Remove the metal spacer from inside the bag filter e Place your hand inside the bag near the top and tap the bag so the dust will fall from the outside of the bag to the bottom of the canister Work your hand around the bag 360 degrees tapping as you Lower your hand and tap around the outside of the bag Repeat this step until you reach the bottom e Wait 2 minutes for the the dust to settle then empty the canister Remove the bag filter after cleaning To empty the Canister e Detach the Pressure Switch Junction Box from the Canister leaving the Hoses attached by pushing the red knob to the left and pull the Box off Unlatch the two clips to detach the canester from the trol ley Tip the Canister over so that the dust and debris fall out into a waste bag e Replace the bag filter and spacer It is very important to ensure the bag sealing edge is secure to prevent vacuum leakage Secure the canister and place the Vacuum Head back on the Canister and clamp securely To clean the Cartridge Filter e Slide off the clamping wires and pull off the Filter e Vacuum the filter inside and outside using the brush tool of another vacuum e Gently spray warm water into the inside of the filter Let the water fill the cavity then dump the water Repeat this step until the water is clean e Gently spray water on the outside of t
Download Pdf Manuals
Related Search