Intelligent Remote Control Fishing Boat User Manual CarpHunterTM
Contents
1. button to back to OFF Continue to press the MENU button to end the menu turn off the remote control switch and rebooting the new compass directions will be setup the compass direction of the remote control and direction of the boat will be adjusted to the same Adjust to the rocker center point and sensitivity of the remote control I Adjust to the rocker center point of the remote control OFF ON Press Menu to find ROCKE MID OFF ON function indicator press button to turn OFF to ON G Ajust the rocker sensitivity of the remote control OFF ON Press Menu button to find ROCKER MAX off on function indicator Press button to turn OFF to ON then turn the remote control with clockwise for one circle and press to back OFF For all Menu items adjustment you should close the MENU after adjustment completed then turn off the remote control and turn on the remote control again So the new data will be store in the remote control Note we completed the adjustment for the center point and sensitivity of the remote control before delivery so the user doesn t need to do it again K Fish finder sensitivity Adjustment according to the depth rang 0 4 0 9 0 18 0 36 metres of 4 stalls to adjust to meet users request for different water depth exploration POWERO Adjust to the boat and the compass of remote control Menu and cc combined When the boat is working in new e2. Boat sailing distance display After the satellite signal stops flashing setup the Origin and the distance from Origin to Destination will be measured which will be displayed once every 5 meter sailing distance GPS Auto navigation GPS1 8 when the boat sails by GPS the LCD shows GPS1 GPS2 GPS8 when the boat arrives in destination the boat will stop automatically shows returning to manual status MANU 9 4 Setting and navigation sailing of GPS After the boat starts GPS starts to looking for satellite signal automatically when signal icon glitters and stops it shows the signal has been found Setting of departurep 1 After GPS signal is normal open GPS menu GPS choose departure icon set icon 1 as departure 2 Press GPS SET button SET to set the chosen departure 3 Press ESC button to exit GPS menu Setting of destination 1 Open GPS menu button GPS to choose destination icon set 2 8 icons as destination 2 Press GPS SET button SET to set the chosen destination the setting method is the same as departure 3 Press ESC button and exit GPS menu Sail automatically with GPS navigation 1 open GPS menu press GPS button find out the set icon departure or destination 2 Press GO button the boat will sail to required desitnation automatically after reach to the destination the boat will stop and exit GPS nevigation automatically and change to manual saling mode When the boat is in the mode of GPS nevigation the LCD shows the
3. on off electronic motor speed control etc The boat can work in the following work modes manual control automatic cruising automatic demonstration GPS guided Automatic navigation and other modes The boat has four Models A B C and D of configurations to meet the need of different consumers An interface is reserved for upgrading from lower model to higher model When the consumer buys a product with low configurations he or she can go to the sales agent to buy upgrading parts when it needs upgrading easy installation The remote control handset does not need to be changed pte equipped with functions for all models and the upgraded functions will be displayed on the LCD screen automatically Attention This boat might have a leeway When working in the ANOTHER DIFFERENT environment because the compass inside will be interfered by the different magnetic field To solve this problem please open the MENU re adjust the compass inside the boat and the controller aligning the direction of the compass with the direction of the new magnetic field Please refer to G and H in the 6 1 13 Menu Button 5 Name of each part of the boat hull See Figure Charging socket Antenna N lt Boat lifting handle i RP 4 Battery chamber cover Anti collision lt a x Rubber ring Front lamp Switch Anti water Grass shield Bait tank Hull Block Diagram Fish finder probe Fishing line hanger Bait tank d
4. again icons will return to the close state 4 Lighting Remote Control press the button to control the boat light on the front on off situation displays on the screen of remote control 5 Automatic cruising System button AUTO When this button is pressed the boat will automatically sail to the direction locked by electronic compass When the boat is in automatically sailing status AUTO will be displayed on the LCD screen If manual control is needed press this button again to stop the automatic cruising 6 9 GPS function button see GPS introduction 6 GPS Menu Button GPS 7 GPS Set Button SET 8 GPS Auto navigation Button GO 9 GPS Menu Exit Button ESC 10 Automatic demonstration function button DEMO When this button is pressed the boat will automatically demonstrate its sailing direction straight line or turning bait casting decoupling device switch on off of lighting simulation signal of fish finder and repeat these operations 11 Combination of screen backlight selection button LCDL and menu selection button When the light is weak press the button to switch on the backlight When pressing the menu button use the button to amend and setup the selected menu Notes When the screen backlight is set as On backlight lamp will always lighten so much power will be consumed and the use time of the battery will be reduced It is recommended to use this function when there is insuf
5. destination selection of GPS1 GPS8 after it reaches to departure and destination with GPS nevigation the LCD will indicate MANU Note Icon 1 8 of GPS can be both departure and destination our clients can choose randomly There is automatic saving function of GPS address setting so that during starting in the second time still can use previous saving address As the satellite signal strength depends on the weather and current geographical position the time length of receiving signal will vary with different satellite signal strengths and generally the time is not more than one minute After capturing the satellite generally it can work properly after 5 minutes of satellite navigation and if it needs to set the departure point in advance a big error will occurs when the boat returns at the same time the returning road will be longer too will be arc way If target address of nevigation isn t set GPS will not complete nevigation funciton and can t measure the distance If no origin and destination is setup the GPS navigation function will become invalid Weather will affect the sensitivity of GPS and when cloudy or thick clouds the GPS satellites capturing time will be extended When indoor signal is weak and please use it outdoors Communication launching tower would interfere with GPS using in its vicinity should be avoided g gt g 9 5 Installation of GPS If GPS as upgrading parts th
6. of the boat MOTO ADJU MOTO ADJU L 50 R 50 L 50 R50 indicates the rotation speed of the motors on the left and the right side of the boat and when the speeds of two motors disaccord press selection button to tune their speeds For example the boat is sailing turn to left a little to indicate the left motor speed less than right motor speed press Menu to increase the left motor speed continue to press let L50 upto 51 52 53 at same time R50 reduced to 49 48 47 D Metric Inch Conversion of TEMP UNIT Celsius Fahrenheit CELSIUS FAHRENHE E Metric Inch Conversion of DEEP UNIT Metres Feet DEEP UNIT DEEP UNIT METRES FEET F Open amp close of fish icon see the instruction of fish finder Close fish iron will be better to see the size and number of fish open fish iron to see if the fish underwater FISH MAKE QFISH MAKE OFF ON G Adjusted electronic compass directions on boat COMPA AOJ OFF ON COMPA ADJ COMPA ADJ OFF ON Press MENU button to find COMPA AOJ function indicator press button to turn OFF to ON then turn the remote control clockwise for two circles then press button to return ON to OFF H Adjust the compass directions on the remote control ARROW ADJ OFF ON OFF ON Press MENU button to find ARROW ADJ function indicator press the button to turn OFF to ON then turn the remote control with clockwise for two circles then press
7. the screen 4 River bed geomorphology River bed geomorphology will be displayed with different reflection waves of the river bed produced by sonar 5 Fish icon Fish icon will be used to indicate the different reflection waves of the suspensions produced by sonar 6 Fish finder automatic demonstration automatically demonstrate simulation signals of river bed contour fish icon water temperature water depth and depth range 7 Metric Inch Conversion of TEMP UNIT CELSIUS FAHRENHEI 8 Metric Inch Conversion of DEEP UNIT METRES FEET 9 Start and close of fish icon Close fish icon to control better quantity and size of fish Start fish icon check whether there is fish or not in the water 10 3 Fish finder installation Open the upper and lower covers of the boat and install the probe and control board of fish finder respectively as following 1 Probe installation Remove the probe cover drill a 4mm round hole on the bottom of the boat lead probe signal line through the bottom of the boat install it in the signal line groove fix the proble with screws on the bottom of the boat and inject waterproof sealant in the waterproof cabin cover the waterproof coverplate well and fix it with screws 2 Control board installation At the bow of the lower cover four holes are retained for installation of control board thus the control board can be fixed with screws 3 Connection of control board of fish finder and the central co
8. 1 automatically you can choose one icon as Origin while choose the other 7 icons as Destinationts 2 GPS setting button SET After selecting the icon press the button for 3 seconds until the selected cursor block turns black which indicates it has been setup successfully If need to cancel the setup cursor open the selection button again to find the cursor needs to cancel press it for 3 seconds again until the icon turns to flashing state from black which indicates the setting has been cancelled Setting of address can be saved so that it can be used next time 3 GPS automatic cruising GO press GPS key press menu selection button and transfer the cursor to the Target Points hope to select and find the setup Destinations Press the button the boat will carry out automatic cruising according to the setup locations At the same time current cruising Destination GPS1 GPS8 will be shown on display screen If you want to cancel automatic cruising function during the automatic cruising state please press GPS and GO button again 4 Exit button of GPS menu ESC press this button to exit of GPS menu the original destination address of GPS won t be cancelled 9 3 LCD screen of the remote control GPS satellite signals the icon is indicated with origin with 2X character and when the icon flashes it indicates it is searching the satellite signal and when it stops flashing it indicates that the signal has been captured
9. Intelligent Remote Control Fishing Boat User Manual CarpHunter Manual Reading Guide 1 Fishing Boat Function 2 Product Features 3 Fishing Boat Performance 4 Quick start instruction 5 Name of each part of the boat hull 6 Name of each part of Remote control and operating instruction 7 Battery charging 8 The use of safety and precautions 9 GPS satellite navigation 10 Fish finder 11 Product packing 1 Fish boat function 1 1 The boat with bait and hook to the depths of lake or river to get fishing through manual and automatic control 1 2 The boat can be sailing automatically by GPS setting and store sailing points 1 3 To know well of underwater landscapes and river fishing situation 2 Product Features 2 1 4 33MHZ full digital duplex wireless remote control 2 2 Operation method Manual control and automatic control 2 3 Two sets of bait hopper and hook controlled via electromagnet 2 4 Lighting by Remote Control 2 5 Low voltage alarm weak signal alarm 2 6 Weed guard cover waterproof and crushproof 2 7 Remote control with LCD to display the various working situations 2 8 GSP can set and store 8 different target points and let the boat with sailing automatically 2 9 Calculate the distance of boat travel in a straight line and the actual travel time 2 10 Fish finder can keep track the traveling fishing situation 2 11 The boat with 2 power form lead acid battery and lithium battery not com
10. ct packing No Name Specification Quantity 1 Hull 63 5 X 43 5 x 24CM length x width x height 1 2 Remote control handset 3 5 inch LCD display white screen backlight 1 3 Charger A B Charging the lead acid batteries and lithium batteries respectively 2 4 Charger conversion plug Length 15CM 1 5 battery 6V 10AH or 7 4V 10AH 2 6 Lithium battery 3 7V 1 AH 1 7 Outer packing box size 70 51 30 5CM 1
11. e installing steps as follows 1 on the control circuit board of electric compass on the bow there is sockets mounted GPS module and 2 copper pillar to fix the module insert GPS module and fix the module and copper pillar by screws 2 when receiving the satellite signals to set according to use steps of GPS 10 Fish finder 10 1 Function of fish finder Fish finder consists of sonar probe central control PCB and LCD display three parts Sonar transmits ultrasonic wave into water and then the reflected wave of the matters in the water will display on the LCD screen of the remote control handset after the treatment of central control PCB thus to let us know the contour of river bed water depth water temperature depth range and the activity condition of fish school and facilitate bait casting and fishing 10 2 Detection and display of content 1 Water depth It displays the boat depth during sailing and when the probe is placed in water the water depth reading will be displayed on the screen 2 Water temperature It displays the water temperature and when the remote conttol handset is switched on if no water the indoor temperature reading will be displayed on the screen 3 Depth range fish finder Depth range includes four levels of 0 4 0 9 0 18 and 0 36 which can be regulated according to depth gt changes Depth range will be displayed on the screen and if depth exceeds the range of 030 4m will be displayed on
12. ert the charger plug into the charging socket of remote control handset C Separately charge the battery Special conversion connectors can be used to connect the output end of the charger to the battery for charging 7 3 Battery use notice Note This charger can only charge two lead acid battery series and it is not allowed to charge a single lead acid battery to avoid overcharging and the battery damage Charging the lithium battery separately is prohibited Before use the boat batteries and remote control handset need to be charged and the initial charge time should be no less than 8 houts After a long term storage the battery should be charged once every two months If the fishing boat will not be used for a long term please take the battery out after charging it Do NOT put the battery in the sun directly or any places near fire sources The battery can NOT be put at places where is accessible to children 8 The use of safety and precautions The antenna is the best conductor for electromagnetic waves and lightning easily absorbs newly formed lightning So when in stormy weather please switch it off It is dangerous to use the remote control handset in explosive locations Please avoid using it in those places As the electronic compass is easily affected by external environment please avoid using it under high voltage cables as well as in the areas surrounded by a strong magnetic field or metal
13. ficient light 12 Combination of alarm sound elimination and menu selection button When alarm sound is unneeded you can use the button to eliminate the sound When pressing the menu button use the button to amend and setup the selected menu 13 Menu button MENU press the button you can select 6 menu items and after selecting a certain menu item press menu selection button to setup and after menu setting is completed press menu button again and the menu will be stored Note only after 5 menu items are continuously pressed the setup menus can be stored Remark all functions of Menu were selected before ex factory there is no need to select every time if you need to change a certain function that you can use the Menu button The following selection can be made by pressing the menu button A Select boat type BOAT TYPE TYPE_A A TYPE A Basic type BOAT TYPE TYPE B B TYPEB Basic type GPS BOAT TYPE TYPE C C TYPEC Basic type fish finder BOAT TYPE TYPE D D TYPED Basic type GPS fish finder B Selection of remote control handset communication channels COMM ADDR CHANNELO CHANNEL1 CHANNEL2 CHANNEL3 CHANNEL4 There are up to 5 channels to select Note before ex factory channels selection has been setup which don t need to be setted during use Only if two boats with the same frequency work at the same time rechoose different channel again C Fine tuning the motor speed on the left and right side
14. mine The angle between the antenna of remote control handset and the ground should be more than 45 degree and try to put the antenna at a relative high position to ensure the maximal signal between the boat and the remote control handset Do not dismantle the boat and the remote control handset without authorization If dismantlement or maintenance is needed please handle in a specified after sales service center The company will not be responsible for any negative effects caused as a result of unauthorized dismantlement Keep bait hopper solenoid switch s cleaning Before the switch suck amp shut please clean the stained clay and sand or other adsorbed materials on solenoid switch and iron sheet to avoid affecting solenoid switch s performance 9 GPS satellite navigation 9 1 function A Set and save 8 different addresses 1 departure and 7 destination to locate the return and place of play nest for the boat B The boat can navigate and sail automatically between specific addresses C calculate and indicate the effective distance between boat and remote control handset 9 2 Button function of GPS see front view of remote control handset button 1 GPS menu selection button GPS Press the button to enter into the GPS menu where there are 8 icons available One flashing icon indicates the stop position of the button and when pressing it once the cursor will skip an icon after it reach to 8 return to
15. ntrol PCB of the boat There are three outlets on the fish finder control board which ate separately connected with the probe signal line power line and fish finder signal line their connection methods ate as following A The connection of probe data line lead probe data lines through the bottom of the boat and install the terminals of 3 lines respectively then connect them with probe signal socket of the control board in an order way B The connection of power lines Connect the control board to power output socket of the central control PCB C The connection of signal cables of control board Connect the control board to socket of the central control PCB D Notes The boat should be handled with care to avoid damaging the sonar probe on the bottom of the boat The machine s water depth range is 2 30 4m the machine can t work normally in depths out of such range Fish finder is used to scan the fish situation based on underwater ultrasonic reflection principle which is not a video camera ot video cassette recorder and it has no camera s effect in water so it can neither identify the shape of each fish and the quantity of the fish nor distinguish fish with other suspended matters such as suspended water grass sea turtle bubbles and so on Don t use two identical fish finders in one area otherwise ultrasonic and radio frequency interference may lead to abnormal work of the device 11 Produ
16. nvironment around a strong magnetic the compass will be interfered by the local magnetic area let the boat can not be travelling normally then need to open the menu to adjust the boat and the compass of remote control the compass direction of magnetic field consistant with the new environment note the compass doesn t be adjusted everytime only need to adjust in new environment L Version VERSION 2 3 14 On Off Button press 2 seconds to turn on the power switch of remote control LCD display the data of the boat at this time if the boat is no power supply buzzer will beep sound Then the buzzer sound will be stop after 7 seconds connection with the boat power if you don t want oo to hear the buzzer sound the option to turn off the buzzer by click the left button 15 Charging socket with USB interface connect it to the charger for charging 6 2 Other functions display and instruction Signal strength SM It indicates the strength of signals between the boat and the remote control handset When the signals are strong the signal indicator will indicate full blocks when the signals are weak the signal indicator will indicate less blocks and when there is no signal the signal indicator will indicate X Battery Capacity of boat BV and remote control RV It respectively indicates the battery capacities of the boat and the remote control handset When there is full electric quantity the battery capacity
17. oor 6 Name of each part of remote control and operating instructions Side view I a oo ON Front view Side view II Water temperature Water depth Depth range Sailing distance Actual sailing time Operation mode Signal Boat battery capacity Remote control handset battery capacity Fish icon River bed contour Bait tank door release Sailing direction GPS satellite signals Hanger release LCD Display 6 1 Button name of the remote control and operating instructions of displaying irons 1 Joystick MANU By the use of the joystick manual sailing control sailing can be carried out for the boat Mainly control sailing direction turn left right and backward to go straight mainly use auto sailing and GPS navigation saling function to operate Go forward push the joystick forward slowly and the boat will sail forward Go backward push the joystick backward slowly and the boat will sail backward Turn left push the joystick left slowly and the boat will sail left Right hand bend push the joystick right slowly and the boat will sail right Stop when the joystick is at the middle position the screw propeller will stop turning the joystick will reset automatically The sailing status of the boat will be displayed on the LCD screen with arrowheads the direction of arrowheads is the direction of boat s bow arrowhead up shows sailing forward arrowhead down shows sailing backward arrowhead lef
18. patible 2 12 The products are A B C D in four configurations and still upgrade interface allowing product upgrade 3 Fishing Boat Performance 4 Quick start instruction 4 1 put the fishing bait into the 2 bait hoppers 4 2 Put one of the hooks hanging to the pothook of the boat aft other hooks with bait lead sinkers and fish line connected with rod in the other end you can also hang two rows of hooks 4 3 Open the power of boat and remote control 4 4 Operate the joystick and Auto button taking the boat to the destination that you want 4 5 If your boat has GPS function you can open the GPS Menu to set and store the departure after GPS signal flashing stop for 5 minutes so that your boat our you just open the GPS menu again click GO button the boat will automatically return to your side 4 6 If your boat has fish finder function you can see the fishing size and number in the water through LCD screen then put the bait into the water and release the hook 4 7 When the fish bait It s up to your skill to catch the fish through your hand s rod High brightness LED lamp and flashing night lamp are installed at front and back of the product This bait boat is equipped with double bait hoppers and double rig releases which are controlled via electromagnet switches By the control of the buttons on the remote control handset the following functions can be remote controlled running speed directions bait release rig release lighting
19. rf other beside boats airplane in the sky weather and so on the signal will be weak temporarily The single received by the remote control handset within specific distance will become weak normally it will recover automatically When the boat sails within specific distance if it is disturbed seriously the handset can t receive the signals from the boat the buzzer make a sound of DiDi It indicates the signal already lost the boat will stay at that time the controller in the boat will start signal automatic repair function it will recover signal status within 2 seconds If the boat goes wrong and lead to weak signals and can t be repaired within short time the boat will stay for two minutes and close 7 Battery charging The product is equipped with two chargers which ate respectively used for charging the batteries of boat use and battery of remote control handset use 7 1 Technical Specification of charger Indoor AC input voltage AC100 240V 50 60 HZ Charger for Boat Output voltage 14 5V charge Current 1 5A Output Connector DC5 5 2 2 Charger for Remote control Output voltage 4 5V Charge Current 1A Output Connector USB Charger has LED charging indictor light red light indicates charging now after charging is completed the red light turns into green 7 2 Charger charging method A Boat charge Insert the charger plug into the boat charging socket to start charging B Remote control handset charge Ins
20. t right shows the ship is turning notes the front of the remote control handset should be the same as the direction of the boat s bow Notes when the handset is placed horizontally the boat and direction of the handset is the most exact If it s placed vertically or tilt the boat and the arrowhead direction of the handset will be deviation as 2 Stop Eject hanger Button when pressing this button hanger on the upper side of the boat will be released Repeat above operation the hanger on one side will be released and meanwhile the working state will be displayed on the screen with icon When the hangers are closed icon will display T 6o__ 99 eey character when the hangers are opened hanger icon is and when both icon blocks are it indicate the completion of hanger release and when you press this hanger button again icons will return to T character state sit 3 Bait tank door release key when pressing this button bait tank door on one side of the boat will be released Repeat above operation the bait tank door on the other side will be released and meanwhile the working state will be displayed on the screen with icon When bait tank is closed the rectangular icon display box is of network shape after opening the icon box is in white color and if both icon boxes are in white color it indicates g f the bait casting is completed and when you press this open button of bait tank
21. will indicate full black battery when the electric quantity reduces the battery capacity will indicate less blocks and when the power is running out the battery capacity indication will disappear Effective Running Time Display 00 00 At the same time when the boat starts off it will record the travel time When the boat stops the time counter will also stop counting thus the Effective Travel Time of the boat is grasped Notes it has no data storage function After it is switched off the runing Time Counter will start from 0 again 6 3 Remote control handset sound alarm A Low voltage alarm 1 When the voltage of the boat battery goes down to 10 5V the buzzer on the remote control handset will produce beep sound which indicates the boat can only sail for another 10 minutes and when the voltage on the boat battery goes down to 10 2V the boat will stop working 2 When the voltage on the remote control handset goes down to 3 2 V the buzzer on the remote control handset will produce beep sounds and the remote control handset will stop working B Weak signal alarm when temote control handset can t receive the boat s signal the buzzer on the remote control handset will produce beep sounds gnal Notes when battery capacity is not enough the signal will be weak too and the speed of the boat will be slow When the boat sails within specific distance sometimes it will be disturbed by other signals such as wind su
Download Pdf Manuals
Related Search