User Manual - Special Needs Pushchairs
Contents
1. Model 1185 Shuttle Buggy Please ensure the manual isread and understood before using the buggy Keep these instructions for future reference Contents Page Safety Information 2 Unfolding 3 Fitting Footplate 6 Fitting Upholstery 7 Adjustments 8 Safety Information Read these instructions carefully before use and keep them for future reference Your child s safety may be affected if you do not follow these instructions This vehicle is intended for children from 4 years and up to a maximum weight of 50kg WARNING It may be dangerous to leave your child unattended WARNING Ensure that all the locking devices are engaged before use WARNING Use a hamessassoon as your child can sit unaided WARNING Any load attached to the handle affects the stability of the pram pushchair WARNING Always use the crotch strap in combination with the waist belt Continued WARNING Check that the pram body or seat unit attachment devicesare corectly engaged before use WARNING This product is not suitable for running or skating The footplates must not be used when transfering in or out of the buggy Neverleave an occupied buggy unattended The buggy is not designed for off road use or for use on soft surfaces such assand ONLY 1 child to be transported at any time Unfolding Velcro Strap Before attempting to open the buggy make sure the Velcro transport strap isun done Si2. mply hold both push handles and lift them up the buggy will unfold into position Continued The locking levers must now be operated Above shows the backrest locking lever When unfolding the buggy this must be pushed down to lock the backrest in the open position The image above shows the seat locking lever When unfolding the buggy this must be pushed fully forward Continued Also ensure the frame locking lever is fully located as shown below there isa levereach side of the buggy Frame Release The buggy is now fully unfolded If the buggy feels loose recheck all frame locks to ensure the stability of the buggy before allowing any person to sit in it Fitting the Footplates Insert the footrest stem tube into the receiving tube and tighten with the allen key provided as shown below s lt r x x gt N gt SS gt ARR RN A NRA S Whos SS If the footrest needs to be adjusted the bolt needs to slackened adjusted and then re tightened before use Note the footplate must be swung away before fording the buggy for tansportation purposes Simply lift the footrest and swing away to the outside of the buggy asshown above Fitting Upholstery Seat The seat is secured using velcro strips Simply align the strips and secure the seat in position Bac krest The upper fixing points for the hamess need to be removed These can be removed by
3. undoing the small finger wheels on the rear of the backrest Align the back upholstery holes with the holes on the backrest mesh and refit the screws and tighten the finger wheels as shown below Cling ne heey uty tenn Wirth j ee alas A yee j Backrest Angle The backrest can be set in either a vertical position to a semi reclined position Release the locking lever as shown below and set the backrest to the desired angle and push the lever back over to lock in position an Backrest Locking Lever Castors The rear castors both have a parking brake fitted It is operated by the red pedal located between the wheels Simply pes the pedal down to lock the wheels LRN The front wheels can either be locked in the forward direction orbe unlocked to enable them to swivel WARRANTY TERMS AND CONDITIONS Standard Terms This is to certify that yourROMA MEDICAL product is guaranteed fora period of one year from the date of purchase The warranty is not transferable The manufacturer will not accept liability for damage caused by any misuse unauthonsed alterations or non observance of the instruc tions set out in this user manual The guarantee excludes parts which have been subjected to natural wearand tear during this penod Tyresand plastic parts
Download Pdf Manuals
Related Search