DMX-9259-A User Manual
Contents
1. 9259 3G HD SD SDI AES EBU Audio Demultiplexer User Manual Ross G4 63 62 61 SDI GROUP SELECT DMX2 1 DMX2 G1 OFFIOFF G2 OFFION F G3 ON OFF G4 ON ON ts A lt ss f GearLite DMX1 DE MULTIPLEXER ML ques ROSS Video Production Technology DMX 9259 A User Manual e Ross Part Number 9259ADR 004 01 e Release Date June 24 2013 The information contained in this manual is subject to change vvithout notice or obligation Copyright 2013 Ross Video Limited All rights reserved This work is proprietary and confidential to Ross Video Limited its subsidiaries and its other affiliated corporations and may not be copied distributed sold or otherwise used or relied upon without the express written permission of Ross Video Limited Reproduction or reverse engineering of copyrighted software is prohibited Patents This product is protected by the following US Patents 4 205 346 5 115 314 5 280 346 5 561 404 7 034 886 7 508 455 7 602 446 7 834 886 7 914 332 This product is protected by the following Canadian Patents 2039277 1237518 1127289 Other patents pending Notice The material in this manual is furnished for informational use only It is subject to change without notice and should not be construed as commitment by Ross Video Limited Ross Video Limited assumes no responsibility or liability for errors or inaccuracies that may a2. Power Consumption Dimensions 3 938 x 2 656 x 0 813 10cm x 6 75cm x 2 07cm Weight 7 80z 221g Specifications 155 01 14 Service Information Warranty and Repair Policy The GearLite DMX 9259 A is warranted to be free of any defect with respect to performance quality reliability and workmanship for a period of THREE 3 years from the date of delivery to the customer In the event that your GearLite DMX 9259 A proves to be defective in any way during this warranty period Ross Video Limited reserves the right to repair or replace this piece of equipment with a unit of equal or superior performance characteristics Should you find that this GearLite DMX 9259 A has failed after your warranty period has expired we will repair your defective product should suitable replacement components be available You the owner will bear any labor and or part costs incurred in the repair or refurbishment of said equipment beyond the THREE 3 year warranty period In no event shall Ross Video Limited be liable for direct indirect special incidental or consequential damages including loss of profits incurred by the use of this product Implied warranties are expressly limited to the duration of this warranty This GearLite DMX 9259 A User Manual provides all pertinent information for the safe installation and operation of your GearLite Product Ross Video policy dictates that all repairs to the GearLite
3. This equipment has been tested to AS NZS CISPR 22 2009 and found to comply with the limits for a Class A Digital device Maintenance User Serviceable Parts Routine maintenance to this GearLite product is not required This product contains no user serviceable parts If the module does not appear to be working properly please contact Technical Support using the numbers listed under the Contact Us section on the last page of this manual All GearLite products are covered by a generous 3 year warranty and will be repaired without charge for materials or labor within this period See the Warranty and Repair Policy section in this manual for details Environmental Information The equipment that you purchased required the extraction and use of natural resources for its production It may contain hazardous substances that could impact health and the environment To avoid the potential release of those substances into the environment and to diminish the need for the extraction of natural resources Ross Video encourages you to use the appropriate take back systems These systems will reuse or recycle most of the materials from your end of life equipment in an environmentally friendly and health conscious manner The crossed out wheeled bin symbol invites you to use these systems If you need more information on collection reuse and recycling systems please contact your local or regional waste administration You can also
4. DMX 9259 A are to be conducted only by an authorized Ross Video Limited factory representative Therefore any unauthorized attempt to repair this product by anyone other than an authorized Ross Video Limited factory representative will automatically void the warranty Please contact Ross Video Technical Support for more information In Case of Problems Should any problem arise with your GearLite DMX 9259 A please contact the Ross Video Technical Support Department Contact information is supplied at the end of this publication A Return Material Authorization number RMA will be issued to you as well as specific shipping instructions should you wish our factory to repair your GearLite DMX 9259 A If required a temporary replacement module will be made available at a nominal charge Any shipping costs incurred will be the responsibility of you the customer All products shipped to you from Ross Video Limited will be shipped collect The Ross Video Technical Support Department will continue to provide advice on any product manufactured by Ross Video Limited beyond the warranty period without charge for the life of the equipment 15 Service Information Iss 01 Notes Service Information 155 01 16 Notes 17 Service Information Iss 01 Notes Service Information 155 01 18 A Contact Us Contact our friendly and professional support representatives for the following e
5. Name and address of your local dealer e Product information and pricing Technical support Upcoming trade show information Telephone Technical After Hours Emergency Support i Email Telephone General Fax Information Email Website Visit Us Visit our website for e Company information and news 1 613 652 4886 1 613 349 0006 techsupport rossvideo com 1 613 652 4886 1 613 652 4425 solutions rossvideo com http Awww rossvideo com e Related products and full product lines Online catalog Testimonials ROSS Video Production Technology
6. four corners on the bottom of the chassis 9 Installation Iss 01 Setup and Operation Power Adapter and Supply Connect the PS 9000 power adaptor to the power supply connector The PS 9000 provides regulated 5V DC 5 up to 2A The DC power cord has a locking connector that securely fastens into the power supply DC jack on the DMX 9259 A The DMX 9259 A has a standard miniature power jack center pin positive Refer to the section Important Regulatory and Safety Notices to Service Personnel at the front of this manual for details If using an adaptor other than the PS 9000 ensure that e the polarity is correct the voltage is 5V DC regulated to 5 e sufficient current for the DMX 9259 A is supplied Caution Use of improper adaptors may damage the DMX 9259 A and will void the warranty Cable Connections Overview There are four connections to the DMX 9259 A e Four BNC jacks for the AES outputs e An BNC jack for the SDI input e An BNC jack for the SDI output e power supply connection to the GearLite PS 9000 power adaptor Top Top m AES OUT 4 surety SZ DMX2 AES OUT 3 i a AES OUT 2 J SDI OUT DMX1 AES OUT 1 SDI IN WZ T Figure 3 AES Connections Figure 4 Power and SDI Connections Setup and Operation Iss 01 10 SDI Connections Connect the SDI input cable to the SDI IN BNC Connect the SDI
7. output cable to the SDI OUT BNC AES Connections Connect the AES output cables for DMX1 to the AES 1 and AES 2 BNCs Connect the AES output cables for DMX2 to the AES 3 and AES 4 BNCs Status LEDs The chassis faceplate of the DMX 9259 A includes five LEDs that report the SDI and signal status information and the presence of audio Refer to Figure 5 for the LED locations Table 1 describes the status LED available on the DMX 9259 A Table 1 Status LED Descriptions Function When lit green this LED indicates audio is detected in Group 4 When unlit this LED indicates no audio is detected in Group 4 Green When lit green this LED indicates audio is detected in Group 3 G3 Off When unlit this LED indicates no audio is detected in Group 3 11 Setup and Operation Iss 01 Table 1 Status LED Descriptions Function When lit green this LED indicates audio is detected in Group 2 When unlit this LED indicates no audio is detected in Group 2 When lit green this LED indicates audio is detected in Group 1 When unlit this LED indicates no audio is detected in Group 1 When lit green this LED indicates the DMX 9259 A is locked to a valid SDI signal When lit red this LED indicates the DMX 9259 A is not locked to a valid SDI signal DIP Switch Configuration The DMX 9259 A provides a block of four DIP switches located on the front panel Figure 6 One set of DIP
8. contact Ross Video for more information on the environmental performances of our products Introduction Overview The DMX 9259 A 3G HD SD SDI AES EBU Audio Demultiplexer is a cost effective solution to demultiplexing four AES EBU digital audio signals from an 3G HD SD SDI signal The DMX 9259 A accepts one SDI signal and provides one re clocked SDI output on BNC connectors The four AES EBU outputs are also provided on BNC connectors A dual color LED provides SDI and signal status information When illuminated green the DMX 9259 A is locked to a valid SDI signal If the LED is red the DMX 9259 A is not locked to an SDI signal The LEDs labelled G1 to G4 will be illuminated green if audio is detected in groups 1 through 4 respectively If the LEDs are off then no audio is detected in the respective group Power to the DMX 9259 A is provided by an external AC adapter with locking DC connector supplied with the module Simplified Block Diagram 3G HD SD 3G HD SD SDI IN SDI OUT CABLE EQ DIP SWITCH GROUP gt AES 2 SELECT AES 3 RECLOCKER Figure 1 Simplified Block Diagram of DMX 9259 A Functions Features The DMX 9259 A includes the following features e Four BNC connectors for the AES outputs e One BNC connector for the SDI input One BNC connector for the SDI output e Supports SDI Data Rates of 270Mbps 1 485Gbps 2 97Gbps Introduction Iss 01 6 Supports AES3 i
9. d Small brick form factor e 5V universal adapter with locking DC connector e 3 year warranty 7 Introduction Iss 01 Installation Static Discharge Whenever handling the DMX 9259 A and other related equipment please observe all static discharge precautions as described in the following note to sensitive semiconductor devices Avoid handling circuit boards in high static environments such as carpeted areas and when wearing synthetic fiber clothing Always exercise proper grounding precautions when working on circuit boards and related equipment 3 ESD Susceptibility Static discharge can cause serious damage Unpacking Unpack each DMX 9259 A you received from the shipping container and ensure that all items are included If any items are missing or damaged contact your sales representative or Ross Video directly Mounting and Installation The DMX 9259 A can be mounted in any convenient location However to ensure long life for this product observe the following precautions and operating requirements e Maintain an ambient temperature of 0 C to 40 C 32 F to 104 F e Allow for air circulation around the chassis for convectional cooling Many different mounting positions are possible with the included mounting hardware Some installation options are permanent and require careful consideration of the final positioning before installation Please note that in some mounting locations the power adaptor
10. must be affixed in a similar manner as the chassis Other possible options include the use of adhesive magnetic sheets not included affixed to the chassis and the power adaptor for removable mounting on metal cabinets etc Surface Mount Strips The included VELCRO brand surface mount strips allow the GearLite module and power supply to be affixed to a permanent location during use and easily removed for adjustments Carefully consider the installation location before Installation Iss 01 8 proceeding adhesive is very aggressive and is not easily removed The adhesive will cure fully in 24 hours To install the Surface Mount Strips 1 Remove the Protective Backing Film from the adhesive on the bottom of the two VELCRO brand Surface Mount Strips 2 Adhere the Surface Mount Strips to the bottom side of the chassis Figure 2 SURFACE MOUNT STRIPS PROTECTIVE BACKING FILM Figure 2 Surface Mount Installation Option 3 Remove the Protective Backing Film from the other side of the VELCRO brand Surface Mount Strips 4 Press the chassis into position on the surface you want to mount it to Strip is available to mount the power adapter Operating Tip An additional VELCRO brand Surface Mount Non Slip Pads Four non slip adhesive pads have been supplied for desktop placements Simply remove the protective backing film from the adhesive and affix one non slip pad to each of the
11. ppear in this manual Trademarks ROSS 15 aregistered trademark of Ross Video Limited Geartite is atrademark of Ross Video Limited e Ross ROSS ROSS 8 and MLE are registered trademarks of Ross Video Limited e VELCRO is a registered trademark of Velcro Industries B V All other product names and any registered and unregistered trademarks mentioned in this manual are used for identification purposes only and remain the exclusive property of their respective owners Important Regulatory and Safety Notices to Service Personnel Before using this product and any associated equipment refer to the Important Safety Instructions listed below to avoid personnel injury and to prevent product damage Product may require specific equipment and or installation procedures to be carried out to satisfy certain regulatory compliance requirements Notices have been included in this publication to call attention to these specific requirements Symbol Meanings Protective Earth This symbol identifies a Protective Earth PE D terminal which is provided for connection of the supply system s protective earth green or green yellow conductor This symbol on the equipment refers you to important operating and maintenance servicing instructions within the Product Manual Documentation Failure to heed this information may present a major risk of damage or injury to persons or equipment Warning The symbol wi
12. se 6 Warning Indoor Use WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture EMC Notices United States of America FCC Part 15 This equipment has been tested and found to comply with the limits for a class A Digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense approved by Ross Video Limited could void the user s authority to Notice Changes modifications to this equipment not expressly operate this equipment CANADA This Class digital apparatus complies with Canadian ICES 003 Cet appariel numerique de la classe A est conforme a la norme NMB 003 du Canada EUROPE This equipment is in compliance with the essential requirements and other relevant provisions of CE Directive 93 68 EEC INTERNATIONAL This equipment has been tested to CISPR 22 2009 and found to comply with the limits for a Class A Digital device AUSTRALIA
13. switches is labelled DMX1 and the other is labelled DMX2 These switches are used to assign the group to the respective outputs Each group consists of two AES EBU signals providing four channels GROUP SELEC I DIP SWITCHES Figure 6 DIP Switch Location on the DMX 9259 A SW1 to SW4 are set in the ON 4 position as illustrated in Figure 7 EEEE Figure 7 DIP Switches Set in the ON Position Setup and Operation Iss 01 12 Audio Group Configuration Table 2 outlines how to set SVV1 to SW4 to assign the audio groups to the required outputs The following conventions are used A Set the DIP switch in the ON position Set the DIP Switch in the OFF position Table 2 Audio Group Configuration DMX2 OUT DMX1 OUT RE SW3 SW4 Rana 18 13 Setup and Operation 155 01 Specifications Specifications are subject to change without notification Category SDI Input and Output AES EBU Outputs Parameter Standards Table 3 DMX 9259 A Technical Specifications Specification SMPTE 259M SMPTE 292M SMPTE 424M Level 800mV p p 10 SDI Data Rates 270Mbps 1 485Gbps 2 97Gbps Impedance 75ohm Input Cable Equalization gt 50 Belden 1694A cable to 2 97Gbps Return Loss Standards gt 10dB 2 97Gbps AES3 id Level 1Vp p nominal Sampling Frequency 484 Hz Impedance Required Voltage 750hm
14. th the word Warning within the equipment manual indicates a potentially hazardous situation which if not avoided could result in death or serious injury Caution The symbol with the word Caution within the equipment manual indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury It may also be used to alert against unsafe practices Warning Hazardous Voltages This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons ESD Susceptibility This symbol is used to alert the user that an electrical or electronic device or assembly is susceptible to damage from an ESD event gt FP EP B Important Safety Instructions A 1 Warning Read these instructions 2 Follow all instructions 3 Refer all servicing to qualified personnel 4 The safe operation of this product requires that a protective earth connection be provided A grounding conductor in the equipment s supply cord provides this protective earth To reduce the risk of electrical shock to the operator and service personnel this ground conductor must be connected to an earthed ground 5 The AC appliance inlet on the product s power supply is the means to disconnect the supply from the AC Mains It must remain readily operable for this purpo
Download Pdf Manuals
Related Search