Leica DISTO™ S910 - Manual
Contents
1. Initialize lt S device for DIST vertical and 3 horizontal values See Level ling Aim laser at first target Level the device and further values are displayed Do not move Smart Base after levelling Level the device For levelling to get more Smart Base has MENNA to be folded out and device needs Done ue to be in an incli nation range of device after 5 levelling Leica DISTO S910 808167a Aim laser at second target Rotate the device two times clock D wise 90 Follow line the instructions on the display Level amp indicates proper levelling ling is finished when OK icon appears indicates insufficient levelling on the display e indicates that smart base was tilt ed and can affect measuring ac curacy 26 gp Functions DXF data capture Levelling is man Rotate the device Check datory two times clockwise statis 2 For levelling 90 Follow the in _ 1 697m line Smart Base has structions on the dis to be folded out play Levelling is indicates proper levelling finished when OK icon appears on the indicates insufficient level display ling amp indicates that smart base was tilted and can affect measur ing accuracy and device needs to be in an inclination range of 5 Aim at additional points max 30 Max 20 DXF files can be genera2. Consulter le revendeur ou un technicien exp riment dans le domaine radio TV Cet appareil est conforme la section 15 des r glements FCC Son fonctionnement est soumis aux deux conditions suivantes cet appareil ne doit pas causer d inter f rences nuisibles et cet appareil doit accepter toute autre interf rence recue y compris les inter f rences pouvant entrainer un fonc tionnement non d sir Ce dispositif est conforme la norme RSS 210 d Industrie Canada L utilisation est sujette aux deux conditions suivantes ce dispositif ne pas doit pas tre la source d interf rences nuisibles et ce dispositif doit accepter toutes les inter f rences y compris les interf rences pouvant induire des op rations non souhait es Safety Instructions Use of the product with Blue tooth WARNING Electromagnetic radiation can cause distur bances in other equipment in installations e g medical ones such as pacemakers or hearing aids and in aircraft It can also affect humans and animals Precautions Athough this product conforms to the most stringent standards and regulations the possibility of harm to people and animals cannot totally excluded Do not use the product near petrol stations chemical plants in areas with a potentially explosive atmosphere and where blasting takes place Do not use the product near medical equipment Do not use the product in airplanes
3. Donotuse the product near your body for extended periods Laser classification Leica DISTO S910 808167a The device produces visible laser beams which are emitted from the instrument It is a Class 2 laser product in accordance with e EC60825 1 2014 Radiation safety of laser products Laser Class 2 products Do not stare into the laser beam or direct it towards other people unnecessarily Eye protection is normally afforded by aversion responses including the blink reflex WARNING Looking directly into the beam with optical aids e g binoculars telescopes can be hazardous caution Looking into the laser beam may be hazardous to the eyes Value 620 690 nm Description Wavelength Maximum radiant output power for classification 0 95 mW Pulse repetition frequency 320 MHz Pulse duration gt 400 ps Beam divergence 0 16 x 0 6 mrad Labelling A NNI A omplies with 21 eal nd 1040 11 ex asin r deviations pursuant to Laser Notice No 50 dated June 24 200 Model Leica DISTO 910 www leica geosysti FCC ID RFF LD5PS SWISS IC 3177A LD5PS CE it Power Li lon 5V 1A osystems mum Made in Austria Subject to change drawings descriptions and technical data without prior notice Leica Geosystems AG Heerbrugg Switzerland has been certified as being equipped with a quality system which meets the International Standards of Quality Management and Quality Systems ISO stand
4. ES zx a Ang when it has to be right Geosystems Table of Contents Instrument Set up 2 Smart Angle measurement 24 Introduction 2 E i eee aaa ML er E 24 Overview 2 Measuring single distance 25 Basic measuring screen 3 Point to point measurements 26 Selection screen eco eee hea iie niece 3 DXF data capture 27 Pointfinder Viewscreen 4 EUG Sear eS i Site R cendres ioter ve 2 Icons on Status bar 4 VOUE e Sener teel sete eee See ees Charging the Li lon battery via USB 5 Smart Area measurement 30 Using the Smart Base 6 WLAN data transmissions 22 22 s0sss sisesssaspes 3l Using the Smart Base Extension 6 Gilley os oSee ese eue ee E E E E 2 Operations y ol Mura M RE M EC Using the Touch Screen 7 Sloped objects 34 Switching ON OFF 8 Lu du ddr EL CIE EM M CU OC 2 Clear 8 ie Se Se SS ee ee UU EI UNS Message Co
5. Leica DISTO S910 808167a Select release time Confirm setting The self release starts if INPAMEE TT key is pressed gp Functions fx Triangular area Aim laser at third target point Aim laser at sec ond target point Aim laser at first target point Use Up Down navigation keys to show more re sults D 4 248 m First distance Ph 4 129 m Second distance D 2 425 m Third distance 4 855 vL Triangular area I measurement Angle between first y and second 33 00 A 10 802 m Circumference k Leica DISTO S910 808167a gp Functions Sor Height profile measurement Aim at additional points x Ideal for measuring of height differences to a reference point Can be also used to meas ure profiles and terrain sections After meas uring the reference point the horizontal distance and height is displayed for each fol lowing point device X 2 042 m 0 054 m wt d Horizontal distance to Exit function h Height difference to reference point REF Leica DISTO S910 808167a C Functions ku Diameter Aim laser perpendicular to the middle of the round object Select arrows with the cursor keys or by tapping on the display and adjust with softkeys Corre sponding diameter is cal culated 2x P If necessary use the Zoom for precise aiming Ix P
6. ov P OV Overview More results are Circumference e 0 744m displayed Circular area Confirm meas urement Leica DISTO S910 808167a gp Functions Adjusting measuring reference If device is switched off reference goes back to standard set ting rear of the device Confirm setting Leica DISTO S910 808167a Distance is measured from the rear of the de vice standard setting Distance is measured 1 1 from the front of the de vice lock symbol per a manently The orienta tion of the Smart Base is automatically detected and the zero point is accordingly adjusted gp Functions i Pythagoras 2 point Aim laser at second target Aim laser at first target The result is shown in the main line Pressing the measuring key for 2 sec in the function ac tivates automatically Minimum or Maximum measure ment We recommend to use the pythagoras only for indirect horizontal measuring For height measuring vertical it is more precise to use a function with the inclination measuring Leica DISTO S910 808167a C Functions Height tracking Aim laser at upper points and angle height tracking starts automatically Stops height tracking Al 29 89 Tracking angle if device is turned on tripod 3 475 M Y Tracking height if device is turned on t
7. 3 zoz z S lt 5 o A gt e D a 4 Illumination Tilt calibration Q ompass adjustment Touch screen Date and Time Distance units Reset Information Software Update sf Beep LE Z3 Tilt units Switch between the following units 360 0 0 00 Confirm setting Exit settings 180 0 Leica DISTO S910 808167a Fug Settings EN Move Alert of Levelling Choose the sensitivity of the levelling which is needed for some measuring functions FINE means that the levelling of the device is sen sitive to any small vibrations Choose ROUGH when working in harsh con struction environment with many shocks and vi brations In this case the accuracy is decreased in correlation with the movements Confirm setting Exit settings Leica DISTO S910 808167a fq Settings bul Distance units Art No 805080 0 00 1 32 Switch between the following units Confirm setting Exit settings Leica DISTO S910 808167a US Model Art No 808183 0 00 1 8 000 1 32 Fug Settings jj Beep ON OFF Exit settings To switch ON repeat procedure zi Digital level ON OFF The digital level is displayed in the status bar To switch ON Exit settings repeat procedure De Activate keylock Switch on with keylock To deactivate repeat procedure The keylock is active if device is switched off within 2
8. Repeat procedure Use correct password Care Clean the device with a damp soft cloth Never immerse the device in water Never use aggressive cleaning agents or solvents Warranty Safety Instructions Warranty under PROTECT by Leica Geosystems Lifetime Manufacturer s Warranty Warranty coverage for the entire usage time of the product under PROTECT according to Leica Geosystems International Limited Warranty and PROTECT General Terms amp Conditions set out under www leica geosys tems com protect Free of charge repair or replacement of all products or any parts under PROTECT that suffer defects as a result of faults in materials or workmanship 3 Years No Cost Additional services should the product under PROTECT become defective and require servicing under normal conditions of use as described in the user manual at no additional charge To receive the 3 years No Cost period the product under PROTECT must be regis tered at http myworld leica geosys tems com within 8 weeks of the purchase date If the product under PROTECT is not registered a 2 years No Cost period applies Leica DISTO S910 808167a The person responsible for the instrument must ensure that all users understand these directions and adhere to them Areas of responsibility Responsibilities of the manufacturer of the original equipment Leica Geosystems AG Heinrich Wild Strasse CH 9435 Heerbrugg Internet w
9. gt 20 276 m p Circumference es Finish with Measure 2nd length 24 352 m are S Leica DISTO S910 808167a gp Functions Sloped objects F 11 00 7 P2 angle 30 367 nt P2 distance A 3 440 m ns Vertical height be 5 452 m tween both points a Distance between k il both points Indirect distance measuring between 2 points with addi tional results Ideal for applications such as length and slope of roof height of chimneys It is important that the instrument is positioned in the same vertical plane as the 2 measured points The plane is defined of the line between the 2 points This means that the device on the tripod is only moved vertically and not turned horizontally to reach both points Leica DISTO S910 808167a Aim laser at upper Use Up Down navigation keys to show more re Aim laser at lower target point o Included angle be A 33 10 tween both points J Horizontal distance between both points gp Functions Width It is absolutely necessary to aim with the laser per pendicular to the object Select arrows with the cursor keys or by tapping on the display and adjust If necessary use the Zoom for precise with softkeys Corre Confirm p aiming ortkeys Ix P sponding width is calcu measurement lated OV Overview Distance to object Leica DISTO S910 808167a gp Functions Timer
10. internet shops For more details see our homepage Leica DISTO S910 808167a 16 Fig Settings 4 amp Calibration of tilt sensor Tilt Calibration Turn the device horizontally by 80 and place it again on absolutely flat surface Place device on absolutely flat surface After 2 sec the device 180 goes back to the basic mode O Turn the device horizontally by 80 and place it again on absolutely flat surface Leica DISTO S910 808167a Fu Settings Personalized favorites pavone gt 2 Select your favorite functions for gt P quick access 4 DIST Press selection Short cut key left or right Press 2 sec on a selection key in Taller vor Function is set as the measuring mode Select your eer favorite above the favorite function and press again corresponding se short on the corresponding se lection key lection key To save power re duce bright ness if not l necessary Confirm setting Exit settings Yy Select brightness To deactivate repeat procedure Exit settings Leica DISTO S910 808167a 13 Fug Settings 3 Date and Time Set date Exit settings yyyy mm dd Set time hh mm y Compass Adjustment Adjusting the magnetic declination Depending on your geographic location the angle of declination may vary from other locations as the geographic and magnetic poles are aligned However if the
11. or if it has been dropped or has been misused or modified Carry out periodic test measurements Particularly after the instrument has been subject to abnormal use and before during and after important measurements AN CAUTION Never attempt to repair the product your self In case of damage contact a local dealer WARNING Changes or modifications not expressly approved could void the user s authority to operate the equipment Limits of use Refer to section Technical data The device is designed for use in areas permanently habitable by humans Do not use the product in explosion hazardous areas or in aggressive environments Leica DISTO S910 808167a Disposal Z caution Flat batteries must not be disposed of with household waste Care for the environment and take them to the collection points provided in accordance with national or local regulations The product must not be disposed with household waste Dispose of the product appropriately in accordance with the national regu lations in force in your country Adhere to the national and country specific regulations Product specific treatment and waste management can be downloaded from our homepage Electromagnetic Compatibility EMC WARNING The device conforms to the most stringent requirements of the relevant standards and regulations Yet the possibility of causing interference in other devices cannot be totally excluded FC
12. sec A O O Leica DISTO S910 808167a 14 Settings Bluetooth WLAN Explanation see info box below Exit settings Special Settings for data transfer P atm 1 1 E bh LI lt r uS Es ixi HOTSPOT lt r uS Leica DISTO S910 808167a Settings EN Bluetooth data transfer WLAN data transfer Connect the device with your smart phone tablet laptop Only data from the function Point Data transmission can be The actual measurement is transferred automatically if Blue transferred with WLAN corresponding program is need tooth connection is established To transfer a result from ed to receive the data e g DISTO transfer the main line press Bluetooth switches off as soon as the For more details see our homepage laser distance meter is switched off The efficient and innovative Bluetooth Smart module with the new Bluetooth standard V4 0 works together with all Bluetooth Smart Ready devices All other Blue tooth devices do not support the energy saving Blue tooth Smart Module which is integrated in the device We provide no warranty for free DISTO software and of fer no support for it We accept no liability whatsoever arising from the use of the free software and we are not obliged to provide corrections nor to develop upgrades A wide range of commercial software can be found on our homepage Apps for Android or Mac iOS can be found in special
13. C statement applicable in U S This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reason able protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interfer ence will not occur in a particular installation If this equipment does cause harmful interfer ence to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help EN Safety Instructions This device complies with part 5 of the FCC Rules Operation is subject to the following two conditions This device may not cause harmful interfer ence and e this device must accept any interference received including interference that may cause undesired operation This device complies wit
14. I I3 LE perronen i SIA Pee ee EE ON Ll rr Er g Functions Calculator The measurement result from the Select key on k main line is taken over to the calcula 3 display tor and can be used for further calcu lations Ft in fractions are converted into ft in decimal aS Confirm every To take over a result from the calcu key lator in the basic mode press DIST Use selection keys for before leaving the calculator function Pa A 3 i 7 CiCE B3 clear or result Aim laser at target 4 827 MZ up to 360 and a transverse tilt of 10 J Leica DISTO S910 808167a gp Functions Smart Angle measurement Aim laser at point Aim laser at corner on first wall Continues distance and angle measurement Aim laser at point on second wall Displays inclinations of 360 with a transverse inclination of 10 In strument beeps at 0 and 90 Ideal for horizontal or vertical adjustments 90 C OT Leica DISTO S910 808167a gp Functions A Measuring single distance Target surfaces Measuring errors can occur when measuring to colourless liquids glass styrofoam or semi permea ble surfaces or when aiming at high gloss surfaces Against dark surfaces the measuring time in creases Aim active laser at target Leica DISTO S910 808167a gp Functions 4 Point to point measurements
15. VOfTt6S e s mns ess fs Permitted qui MM y PEDENN eh ec aed en 50 Illumination Touch Screen ON OFF E oc eee sy e ME MCN 7 asi Un dac M CORREA E DR Se ROREM 5 Oft E eee 20 Electromagnetic Compatibility EMC 5 ee Be eee 20 FCC statement applicable ns esse 5 SF Ae e eem emia aera 2 D claration FCC applicable aux Etats Unis 52 P Use of the product with Bluetooth 53 Functions A EE ee 22 Laser classification 53 eo ibe DO Pe eee trea crane Enc LIA tee te Labelling 53 alculator Smart Horizontal Mode 23 Leica DISTO S910 808167a Instrument Set up Introduction The safety instructions and the user manual should be read through carefully before the product is used for the first time RS The person responsible for the product must ensure that all f users understand these directions and adhere to them The symbols used have the following meanings WARNING Indicates a potentially hazardous situation or an unintended use which if not avoided will result in death or serious injury caution Indicates a potentially hazardous situation or an unintended use which if not avoided may result in minor injury and or appreciable material financial an
16. ard 9001 and Environ mental Management Systems ISO standard 14001 Copyright Leica Geosystems AG Heerbrugg Switzerland 2015 Original text 808167a EN Leica Geosystems AG m CH 9435 Heerbrugg f Switzerland when it has to be right etca www disto com Geosystems
17. cable to charge the battery Plug the small end of the cable into the port of the device and plug the end of the charger into an electrical socket Select the appro priate connector for your country The device cannot be used while it is charging The computer can also be used to charge the device but this takes more time If the device is connected to the computer via USB cable you can download or delete the gallery It is not possible to upload any data When you charge the battery the following icons show the status Charging Fully charged gt Leica DISTO S910 808167a caution Connecting the charger improperly may cause serious damage to the device Any damage caused by misuse is not covered by the warranty Use only Leica approved chargers batteries and cables Unapproved chargers or cables can cause the battery to explode or damage the device If the device is connected to the computer via USB cable you can download or delete the gallery It is not possible to upload any data Instrument Set up Using the Smart Base Fold out Smart Base Tripod or Use it as mini tripod Adapter thread The Smart Base Extension allows for stable targeting without unintentionally tilt ing the device Do not move or tilt the Smartbase during measuring We recommend the use of a tripod with the Leica FTA360 S adapter Leica DISTO S910 808167a 6 Use only fingers to use the touc
18. d environmental damage Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner Overview Display On Measure Pointfinder Selection keys Viewscreen linked to symbols above Navigation Function screen Enter Equal Clear Off Add Subtract Leica DISTO S910 808167a 2 Instrument Set up Basic measuring screen Selection screen Status bar mt amp 3 0 051 5 078 32 542 T ma zu Main line 199 826 Active function E iN Tap here to start r ON DiSTinads g tance function Settings Favorites Leica DISTO S910 808167a Instrument Set up Pointfinder Viewscreen Icons on Status bar Scroll up and down for further results Zoom stage rc e LA Battery power Bluetooth is switched on DISTO WLAN hotspot activated Other device connected to DISTO WLAN hotspot Illumination adjustment with navigation keys left and right i p sr Crosshair zi Zoom with navigation keys up and down E SONORE IR en E WLAN client mode activated Favorites DISTO connected as client to WLAN Spread 2 fingers apart to zoom on the touch screen Leica DISTO S910 808167a Instrument Set up Charging the Li lon battery via USB Charge the battery before using it for the first time Use the provided
19. des 8 Triangular ar a n Se eae ieee a eee 37 Permanent Minimum Maximum measuring 8 Height profile measurement 38 Add Subtract 8 Diameter a bd EE CO 39 Pointfinder Viewscreen 9 Adjusting measuring reference 40 Screenshot 9 Pythagoras IS DOIN ESS aerate 4 M inoiy EIE LE eee eu lO Height tracking 2 ee een es et mr a ant Area from Photo See SSSR eee Uc EON asm c ee ae 44 A E E T P tiseoras GPO soe ee tentent tee eed 45 Move Alert of Levelling 2 BE SEIN PR Se i ea aaa tie oer 46 Distance units 3 ar SE pee Beep ONCE tere eee cep ce seer dien e erg 4 Technical Data s censascbens et esne 48 Digital level ON OFF 14 PIGS AGO OURS me mnses esse ps rss 49 De Activate keylock 14 ee ji E HEIC 49 Switchon with keylock ee cete ree nes se ee 14 W None eee awe eee 50 BlUstooth WLAN nanea 15 oes eee venient l NE Safety Instructions 50 Calibration of tilt sensor Tilt Calibration 7 Arcas olre DOn ib ee eee reece eee ees E 50 Personalized TG
20. e white and diffuse reflecting target white painted wall low background illumination and moderate temperatures unfavourable conditions are targets with lower or higher reflectivity or high background illumination or temperatures at the upper or lower end of the specified temperature range Tolerances apply from 0 05 m to 10 m with a confidence level of 9576 With favourable conditions the tolerance may deteriorate by 0 05 mm m for distances between 10 m to 30 m by 0 10 mm m between 30 m and 100 m and by 0 20 mm m for distances above 100 m With unfavourable conditions the tolerance may deterio rate by 0 10 mm m for distances between 10 m to 30 m by 0 20 mm m between 30 m and 100 m and by 0 30 mm m for distances above 100 m wee after user calibration Additional angle related deviation of 0 01 per degree up to 45 in each quadrant Applies at room temperature For the whole operating temperature range the maximum deviation increases by 0 1 Ata recommended storage tempera L ture of 20 C to 30 C 4 F to 86 F batteries containing a 50 to 100 charge can be stored up to year After this storage period the batteries must be recharged e For accurate indirect results the use of la tripod is recommended For accurate tilt measurements a transverse tilt should be avoided Functions Painter function area with partial yes measurem Pythagoras 2 point 3 point Indirect h
21. eight Leica DISTO S910 808167a Message Codes If the message Error does not disappear after switching on the device repeatedly contact the dealer If the message InFo appears with a number press the Clear button and observe the following instructions No Cause Correction Hold the instrument without any transverse tilt 156 Transverse tilt greater than 10 162 Calibration mistake Make sure the device is placed on a absolutely hori zontal and flat surface Repeat the calibration procedure If the mistake still occurs contact your dealer 204 Calculation error Perform measurement again 240 Data transfer error Repeat procedure 252 Temperaturetoo Let device cool down high 253 D peas too Warm device up OW 255 Received signal too weak measuring time too long Change target surface e g white paper 256 Received signal too high Change target surface e g white paper No 258 260 300 301 302 340 341 Cause Measurement outside of measuring range Laser beam inter rupted Smart Base not folded out Device was moved levelling not valid any more Point data transmis sion is selected but WLAN is off WLAN Data transfer error Authentication Error Correction Correct range Repeat measurement Fold out Smart Base Perform levelling again Measuring with invalid levelling is possible but it affects the accuracy Switch on WLAN
22. h Industry Canada license exempt RSS standard s Operation is subject to the following two conditions This device may not cause interference and this device must accept any interference including interference that may cause undesired operation of the device Leica DISTO S910 808167a D claration FCC applicable aux Etats Unis Ce produit a t test et ses limites ont t jug es conformes a celles prescrites pour les dispositifs num riques de classe B d crites dans le paragraphe 15 des r gles FCC Ces limites ont pour but de fournir une protec tion raisonnable contre des interf rences nocives dans une installation r sidentielle Les appareils de ce type g n rent utilisent et peuvent rayonner de hautes fr quences Ils sont de ce fait susceptibles de perturber la r ception radiophonique en cas d installation non conforme aux instructions M me en cas de respect des instructions l absence d interf rences dans une installa tion particuli re ne peut cependant tre garantie Si cet instrument perturbe la r cep tion radiophonique ou t l visuelle ce que l on constate en teignant puis en rallumant l instrument l utilisateur peut tenter de corriger ces interf rences en appliquant les mesures suivantes R orienter ou repositionner l antenne de r ception Augmenter la distance entre l instrument et le r cepteur Connecter l instrument un autre circuit que celui du r cepteur
23. h screen Do not allow the touch screen to come into contact with other elec trical devices Electrostatic discharges can cause the touch screen to malfunction Do not allow the touch screen to contact water The touch screen may malfunction in humid conditions or when exposed to water To avoid damaging the touch screen do not tap it with anything sharp or do not apply excessive pressure to it with your fingertips Tapping Dragging Tap on the display to open an on screen button or to make a selection Tapping on the icon in the middle of the bottom line activates the distance measurement or triggers the camera Drag on the display to move to previous or to next screen in the galerie function Pinching Instead of using the touch screen the nor mal keypad but tons can be used also Spread 2 fingers apart to zoom if pointfinder is activated Leica DISTO S910 808167a Operations Switching ON OFF Message Codes OFF If no key is pressed for 180 sec the device switches off au tomatically If the info icon appears with a number observe the instructions in section Message Codes Example 2 sec Leave actual func tion go to default operation mode Device is turned OFF The minimum and maximum dis tance measured is displayed min max The last value measured is displayed in the main line Stops permanent minimum maximum measuring Used to
24. imes clockwise status 90 Follow thein 1 1 697m linc structions on the dis i play Levelling is amp indicates proper levelling finished when OK icon appears on the indicates insufficient levelling display S indicates that smart base was tilted and can affect measur ing accuracy WLAN data transfer of point coordinates 13 207 m Fal z without pointfinder photo with pointfinder photo If smart base is folded out device sends x y z coordi nates of measured point If smart base is not folded out device sends only inclination and slope distance If WLAN is switched off the device requests to switch on WLAN Aim at additional points Leave actual function go to default operation mode Data transfer works only with WLAN Leica DISTO S910 808167a gp Functions Eit Gallery If the device is connected to the computer via USB cable you can download or delete the gallery It is not possible to upload any data Leica DISTO S910 808167a gp Functions zz Area Aim laser at first target point Aim laser at sec ond target point The result is shown in the main line and the lt gt 0 228 m First distance measured value above Partial Measurements Painter function 3 910 m 4 Second distance Press or before starting the first measure ment Measure and add or subtract distanc lt
25. in line Pressing the measuring key for 2 sec in the function activates automatically Minimum or Maximum meas urement ST 24 298 m SY 21 264 m y 23 018 m 20 571 m We recommend to use the pythagoras only for indi rect horizontal measuring For height measuring vertical it is more precise to use a function with inclination measurement 3 J Leica DISTO S910 808167a gp Functions Trapezium 13 459 m h 16 440 m l 70 80 a p P Use Up Down i navigation keys to 7 show more re A 78 383 m Trapezium area 20 9 a es Leica DISTO S910 808167a gp Functions Itt Stake out Two different distances a and b can be entered to mark off de fined measured lengths Approve Adjust Select digit value a value b oe Mi 0 240 m is Next stake When approaching a stake S M ya T the O2 2 out distance out point to less than 0 1 m stake out line ee m the instrument starts to beep The distance to Istance The function can be stopped the next stake out point is displayed by pressing the CLEAR OFF button 0 625 m Approve value b and start meas urement Leica DISTO S910 808167a Technical Data EN Distance measurement Accuracy with favourable conditions Accuracy with unfavourable conditions Range with favourable condition
26. measure room diagonals maximum val ues or horizontal distance minimum values an Add Subtract This process can be repeated as required The same process can 2 be used for adding or subtracting areas or volumes The next meas The next meas urementis added urement is sub to the previous tracted from the one previous one Leica DISTO S910 808167a Operations Pointfinder Viewscreen Exit pointfinder viewscreen This is a great help for outdoor measuring The integrated pointfinder viewscreen shows the target on the display The device measures in the middle of the cross hair even if the laser dot is not visible Parallax errors occur when the pointfinder camera is used on close targets with the effect that the laser appears dis placed in the crosshair In this case the error is automatically corrected with a shift of the crosshair OV Overview Screenshot Screenshot photo is saved in gallery Leica DISTO S910 808167a 9 Fu Operations Memory 4 Leica DISTO S910 808167a Delete memory Take over value for further actions Use Up Down navigation keys to show more detailed results of the speci fic measurement Pointfinder needs to be switched off Use Left Right navigation keys to switch between measurements a ETSI ETATS Overview z Tilt units LAN Bluetooth igital level EC pl e eno mH md a 5
27. reference location is not selected the difference in declination between the poles can differ greatly For best results select the nearest geographic reference point using the steps below 4 Back Confirm Select the nearest loca tion and the device ad c vf justs the declination gt accordingly Leica DISTO S910 808167a Settings al Offset Approve Select digit value An offset adds or subtracts a specified value automatically to or from all measurements This func tion allows tolerances to be taken into account The offset icon is Exit settings displayed C Reset Second confirmation with selection Reset returns the instrument to keys the factory settings All custom ized settings and memories are Refuse Confirm lost A HARDWARE RESET is done by pressing 15 sec on ON DIST key Leica DISTO S910 808167a Settings Information Software Update Connect the Software updates with corre device with spondent instructions can be 4 5 USB to your found on our homepage computer www disto com Make sure that you use always the newest soft ware version Leica DISTO S910 808167a rovc Functions Overview Leica DISTO S910 808167a ccr I Level rE Single Distance measurement Point to point measurements DXF data capture Volume Smart Area measurement WLAN data transmission Gallery Ara Q DUPL
28. ripod i k Pat Jl Heights of buildings or trees without suitable reflective points can be deter mined At the bottom point distance and tilt is measured which needs a re 9E flective laser target The upper point lt I 7 160 m z can be targeted with the pointfinder crosshair and does not need a reflec tive laser target as only the inclination is measured Use Up Down navigation keys to show more re sults Leica DISTO S910 808167a gp Functions e Area from Photo 2x P If necessary use the Zoom for precise P Ix p aiming ov P OV Overview Width Length Circumference Leica DISTO S910 808167a Aim perpendicular to the horizontal center line of the ar ea This area must be perfectly flat on the vertical plane Select arrows with the cursor keys or by tapping on the display and adjust with softkeys Corre sponding area is calculat Confirm measurement ed gp Functions Compass Calibrate Compass The arrow always points to true north 2 Refuse Confirm 2 amp Exit 4 Calibration of Compass Rotate the device slowly in a figure 8 motion until OK icon appears on the display Leica DISTO S910 808167a gp Functions Y Pythagoras 3 point Aim laser at third target Aim laser at sec ond target Aim laser at first target The result is shown in the ma
29. s Range with unfavourable condition Smallest unit displayed 0 1 mm 1 32 in X Range Power Technology yes laser point at distances Tilt measurement Measuring tolerance to laser beam Measuring tolerance to housing Range 360 Smart Base Working range vertical sensor Accuracy vertical sensor up to 0 1 Working range horizontal sensor Accuracy horizontal sensor Tolerance P2P function at distances combination of sensors and distance meas uring Device levelling Levelling range 5 Levelling accuracy 0 05 ISO 163331 1 1 0 mm 0 04 in 2 0 mm 0 08 in 0 05m 300m 0 16 1000 ft 0 05m 150m 0 16 492 ft 6 30 60 mm 10 50 100 m 0 1 7 0 2 PO 40 to 80 360 up to 0 1 approx 2mm 2m 5 mm 5m 0mm l10m Leica DISTO S910 808167a General Laser type 635 nm lt mW Protection class IP54 dust and splash water protected Dimension H x D x W 61 x 32 x 164mm 2 4 x 1 3 x 6 5 in Weight 291 g 10 2 oz Temperature range Storage 25 to 60 C 13 to 140 F 10 to 50 C 14 to 122 F 10 to 40 C 14 to 104 F Operation Charging Digital data Battery Li lon Rated voltage 3 7 V Capacity 2 6 Ah Approx 4000 Measurements per battery charge Charging time Approx 4 h Output voltage 5 0 V Charging current favourable conditions ar
30. ted with 30 meas uring points photos each If pointfinder is switched on the corresponding Stops DXF photos are saved with a resolution of 300 x 400 dpi capture and Leave actual Ey M saves data function go to default opera Do not forget to save your data EN tion mode DIST Y Leica DISTO S910 808167a gp Functions Bj Photo Tap on the camera icon in the mid dle of the bottom line to take a pho tO For screenshots press camera key for 2 sec OV Overview Leica DISTO S910 808167a gp Functions Ka Volume Aim laser at third target point Aim laser at sec ond target point Aim laser at first target point Use Up Down navigation keys to show more re sults lt 13 430 m Ceiling floor area 39 300 m Wall areas lt gt 16 164 m Circumference 5 744 m First distance 2 338 m Second distance 2431m L Third distance 32 653 m T us Leica DISTO S910 808167a C Functions 4 Smart Area measurement Point to Point distance between the last two measured points 2075 04 675 ES J Aim at additional points max 30 Leica DISTO S910 808167a gp Functions WLAN data transmission For levelling Smart Base has to be folded out and device needs to be in an inclination range of 5 Rotate the device m Check two t
31. ww disto com The company above is responsible for supplying the product including the User Manual in a completely safe condition The company above is not responsible for third party accessories Responsibilities of the person in charge of the instrument To understand the safety instructions on the product and the instructions in the User Manual To be familiar with local safety regulations relating to accident prevention e Always prevent access to the product by unauthorised personnel Permitted use Measuring distances Tilt measurement Data transfer with Bluetooth WLAN Prohibited use Using the product without instruction Using outside the stated limits Deactivation of safety systems and removal of explanatory and hazard labels Opening of the equipment by using tools screwdrivers etc Carrying out modification or conversion of the product Use of accessories from other manufac turers without express approval Deliberate dazzling of third parties also in the dark Inadequate safeguards at the surveying site e g when measuring on roads construc tion sites etc Deliberate or irresponsible behaviour on scaffolding when using ladders when measuring near machines which are running or near parts of machines or instal lations which are unprotected Aiming directly in the sun EN Safety Instructions AN WARNING Watch out for erroneous measurements if the instrument is defective
Download Pdf Manuals
Related Search