Home

SV814P or SV614P User manual

1. 4 8 16 CH Professional DVR CE WARNING TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK PLEASE DO NOT REMOVE COVER WHEN POWER CONNECTED NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications FCC Caution To assure continued compliance use only shielded interface cables when connecting to computer or peripheral devices Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This Class A digital apparatus meets all the requirements of the FCC Regulations LIMITATION OF LIABILITY This users manual is supplied as is with no warranties be it expressed or implied including but not limited to the implied warranties of merchantability suitability for any exact purpose or non infringement of any third party s rights T
2. 3 Click Backup to enter into backup interface Click Erase to delete data in your USB disk which you want to backup then click Add to add files 5 Click Start to start backup files Method 2 Backup recording files according to detail files To back up the recorded footage you first need to indicate which cameras and time interval you want to save to an external source Y e i After searching Emri files you can choose files with checkmarkM in front of file on right panel and click o enter backup interface 21 09800500000 FA Fe 2 F FF Fi After that click the START button it will begin backup this file It will bring up the Backup dialog window If the system cannot recognize the connected devices or none are connected you will see a warning message You have not selected a device The system will automatically detect all available backup devices and display them in the Backup Device field positioning the mouse over this field or entering it with the help of the arrow buttons will allow you to view the available choices Currently you can connect such external media as USB flash drives portable USB HDDs and USB DVD recorders The system only supports the FAT32 file system for USB flash drives and HDDs Playing backed up video on your PC The backup file will be in DAV format and it can be played by special player This player will be provided i
3. TV Adjust Screen layout adjustment Logout Logout menu user View 1 View one channel in full screen mode View 4 View four channels in full screen mode View 6 View six channels in full screen mode View 9 View nine channels in full screen mode View 13 View thirteen channels in full screen mode View 16 View sixteen channels in full screen mode Mute Turn on or turn off the sound See the following subsections for a detailed description of each of these functionalities 4 2 Shortcut Menu Options 4 2 1 Main Menu Pressing this button will bring up a screen for setting up all system configurations You can adjust such settings as Record Alarm Setting Advanced and Information Please refer to Section 5 DVR Settings for the detailed description of these settings 948 418 po Record Alarm Setting Advanced Information 4 2 2 Record Playback To play the recorded video press the Record playback button on the shortcut menu to enter video playback interface 18 You should select channels you want to search and click button MET and there will be notes list on the right panel You can double click any recording list to playback it In order to playback a certain video feed from a particular camera you first need to indicate what time and which camera you wish to receive this information from Then click MET to search for files Select channel you want to monitor Fill in the
4. Record enquiry and playback sorted by video type All alarm motion detection all alarm channels time the result will be displayed in file list choose the file to play R Regular recording file A Alarming recoding file M Motion detection file H Manual Record backup operation and setting 25 Motion Detection Camera Masking Video Lost Alarm Input Setting Include channel enable off sensitive detection zone arming time output time delay alarm linkage PTZ linkage pre recording patrol setting etc copy amp paste for same settings Include channel enable off sensitive arming time output time delay alarm linkage PTZ linkage re recording patrol setting etc copy amp paste for same settings Include channel enable off arming time output time delay alarm linkage PTZ linkage pre recording patrol setting etc copy amp paste for same settings Include channel enable off alarm input type arming time output time delay alarm linkage PTZ linkage pre recording patrol setting etc copy amp paste for same settings Alarm Mode setting on off and status Abnormity setting on off and linkage action Alarm output Setting system time time format language recording in HDD series number video system video output format stand by time etc Setting audio amp video encode mode frame rate quality etc Setting network address video transmission protocols DHC
5. is none 5 4 8 Tour Setting In this interface you can enable or disable tour set views for tour 10800050000 Type Select display mode of tour General and spot Split Set tour split mode Enable Tour Enable or disable tour 44 Interval This refers to sequencing time View mode Select view mode for tour 5 5 Advanced Setting Next menu tab in the Main Menu is Advanced Setting Under this tab user can manage HDD upgrade system configure parameters maintenance system reset all configurations to factory defaults and shut down system Advanced n 5 5 1 HDD Manage In this interface you can manage HDD Main Menu gt gt Advanced gt gt HDD Manage AEREA RATE HDD Manage If 2pcs HDD installed then displayed as 1 2 in HDD If selecting the first HDD it displays current type total capacity and status You can modify HDD attribute read only disk read write disk redundancy disk or format all the data in the HDD After all the setups please click OK button system goes back to the previous menu Note You can set proper mode for each hard disk from the dropdown list When you use redundant backup function you can set one or more redundant HDD s Please note you need to set at least one read write disk otherwise system will not record video 5 5 2 USB Upgrade Connect to the USB port on the rear panel with the USB device which has upgrade file and then select the file to upgrade 45
6. vs500 camera surveillance Ver 1 00 1 a Fig 8 Fig 9 1 PTZ Control Click or to control PTZ direction upward or downward If you click on UP Down it will switch to Left Down and you can control direction to left hand or right hand Click El or D to adjust relevant parameter If you click on Zoom it will switch to Focus or Tris 2 Login Click it to set up parameters Camera Click it to enter camera selecting interface Full Screen Click it to display image in full screen mode Appendix 1 Setting up Internet Connections for Remote Access This section will explain the ways to connect your DVR to the internet using static and dynamic IP addresses To connect to the internet you will need to use a modem and a router As a network device your DVR should have its own address called an Internet Protocol IP address This address can be used by other network devices 1e computers to access the DVR to remotely monitor the CCTV cameras and change settings You can get a static IP address from your internet service provider this way you will always have the same address at all times though this 76 method is rather expensive If you have a static IP enter your static IP in the DVR settings and the router will connect your DVR to the internet You may alternatively choose to use dynamic IP which means that the IP address of your DVR may frequently change but it will still be possible to f
7. System pops up password input dialogue box if you have not logged in In real time monitor mode you can go to the main menu When you have selected one menu item left click mouse to view menu content Implement the control operation Click combo box to pop up drop down list In input box you can select input methods Left click the corresponding button on the panel you can input numeral English character small capitalized Here stands for backspace button stands for space button Left click In English input mode _ stands for input a backspace icon and stands for deleting the mouse previous character In numeral input mode _ stands for clear and lt stands for deleting the previous numeral When input special sign you can click corresponding numeral in the front panel to input For example click numeral 1 you can input or you can click the numeral in the Ar 2 fa 47 5 6 I7 la los io amp Jw on screen keyboard directly Implement special control operation such as double click one item in the file list to Double left playback the video click mouse In multiple window mode double left click one channel to view in full window Double left click current video again to go back to previous multiple window mode In real time monitor mode pops up shortcut menu one window four window nine window and sixteen window Pan Tilt Zoom color setting search record alarm input alarm output mai
8. IES 13 prove An stan sara Disk DIV A A ss 14 3 5 3 PTZ Control Connection s Optional ii A hivuedwawtiess 16 4 GETTING STARTED AND THE MAIN SCREEN iii A RA A a da 16 AER IMAN SCREEN Nas 16 4 1 1 Displaying a Single Channel AA iene cebk aalesinesita va stans ania cauundcuernan aa ateastwis an vain ae deaceuan eesinc numa winas 17 TARO OSIN SyS allt PRR eae OR MeN II ETE Re ee me TORT MCR A Ge Bt meee A We eer a 17 AMAS MOI nad cds ti tv enter Nene enya Cent mene 18 4 2 SHORTCUT MENU OPTION Si A A a a 18 Be IO A A A O A A TN 18 42 2 NR NOS 18 42 3 O A a sented Aa E E cabin tae ican cata oes catenin E E aE dena EE 20 NN Os e tenran n a e e a wr bal ada aaaea Eaa a eR PREASA RETES 22 42 S Alarm Output sen a A DATS a A a a PTA 23 4 2 0 PTZ CONTO A E E E E NEE E salina tenn sen E E E E 23 SOS 24 A A A O a 24 A29 NS OU O E RR NO 25 42 10 Screen Vew Modes uu isa deals 25 4 3 CHANNEL STATUS DISPLAY oia E EE ES AE AE EDESA 25 X DVR SEFLINGS Mere ere ena EA TNE EE O ENE T E AEE E EEA 25 5S MAN MENU a ae aE E AAA AAA AAA E O E EORR 25 SLIM ept Opo DS a SS ARA RAS A II TL A A AE 28 RBD RISA MoM TIN os 28 52N A e RN 28 II A E cater aaa a sel tom coe Seta ec A can aeiaa Sa sce eae nate ae thd au ts sitet a N 29 e Ae COE BAC MOLI trolas 29 Y ee US SETTING EA AAA AAA AAA AAA AAA O eee 29 53l Monon Detection mi ceca eat eta SITE IA cs 30 332 Camera IV LAG Me TIN iS d ae cose aint earn les 31 O 33 Soe A A O en ORG e mer tm Core 3
9. Samsung SONY etc The changes will take effect after you save and exit Address Select the PTZ address It must be consistent with the address of the actual PTZ cameras installed Make your choice of any number from 1 to 255 Please note that this is not the same as the number of the channel to which you hook up the PTZ camera in your DVR system Baud rate Select the PTZ device baud rate It must be consistent with the baud rate of the actual PTZ cameras installed You system supports four options 1200 2400 4800 9600 19200 38400 57600 115200 Data Bits Options include 5 6 7 and 8 The default setting for DATA BIT is 8 Stop Bits Options include 1 and 2 The default setting is 1 Parity Options include None Odd Even Mark and Space The default setting is none Note When making changes to PTZ camera functionality settings make sure that these changes are being made to actual PTZ cameras by selecting the correct number in the previous field Camera Channel 43 5 4 7 RS232 There are various devices for you to select Console is for serial port or min end platform to upgrade program Keyboard is for you to control current device Baud rate You can select proper baud rate Data bit You can select proper data bit Stop bit There are three values 1 2 Parity there are 4 choices none odd even blank System default Console Baud rate is 115200 data bit is 8 digits stop bit is 1 and Parity
10. You can select a stream level according to your demand Real Grade High Y Real Grade Middle Real Grade Low Default Grade Fluency Grade Low Fluency Grade Middle Fluency Grade High 54 sul Display images in full screen mode ma Display image in single screen mode Es Display image in 4 screen mode ml Display image in 6 screen mode mel Display image in 8 screen mode ine Display image in 9 screen mode E Display image in 13 screen mode E Display image in 16 screen mode Display image in 20 screen mode En Ez Display image in 25 screen mode ES Display image in 36 screen mode a Click this icon to start talk back Introduction of functions on live 192 168 1 238 1 1336Kbps 51 There are several icons at the bottom of each channel you can get detail information below 192 168 1 228 10 352Kkbp5 51 It shows IP address net bandwidth and camera ID EA Click this icon to capture picture CI Click this icon to start record W Click this icon to start listen EJ Click this icon to stop view Introduction of functions to adjust position E Click this icon to move image to left hand El Click this icon to move image to underside E Click this icon to move image to right hand FT Click this icon to move image to upside Fl Click this icon to zoom in E Click this icon to zoom out FA Click this icon to restore image 55 6 5 4 PTZ Control Co
11. automatically enter GUI as follows mi Le a a a io nl ie Oo 7 un ee Ta Fill in your username password and select English to enter the system The password is the same as the one set in DVR USER Name Input user name The administrator has all authorities but common user has been limited authorities by administrator PASSWORD The password is as the same as the password of Device Language Select language If you checked the Save Password It will save password automatically Note If you connect the device in WAN the IP should be a public IP 6 5 Operation Interface Options in the main interface include LIVE RECORD QUERY ALARM CONFIG SYSTEM CONFIG ABOUT and LOGOUT Click any option to access 6 5 1 Live After login system success you can enter interface as following 53 rat wf wef ae ef eed epics 6 5 2 Connect cameras In the previous fig users can click mouse on left panel to connect any camera or click Open All to connect all the cameras Open All main In this mode the images will be clearer and demand higher bandwidth Open All Sub In this mode the images will be worse than main stream mode and more fluency Users can select above mode according to net condition 6 5 3 Functions on View After connecting cameras successfully you can see interface as following e ipe jee pi F o o e ES a Click this icon to pull out a menu show as below
12. in sub menu PTZ control Confirm current operation f N Enter dl System menu in review window A Close upper interface or controls Record Manually stop start recording O LED Indicators STATUS When push any key status indicator light will be on Network indicator light In normal playback or pause mode click this button to reverse In Reverse Panse reverse playback click this button to pause Iris Adjust iris Various fast speeds and normal playback Fast play Fi oom Multiple slow play speeds or normal playback Slow Play 7 oom Playback or paused mode click this button to realize Play Pause normal playback Iris Adjust iris In playback mode playback the next video Play Next Focus In playback mode playback the previous video Play Previous Mult Ente Switch output between VGA and CVBS Combination key Mult W Switch resolution of VGA 3 2 Back Panel Please take actual machine model as quasi 4CH USB Port Mouse Interface Power Switch Fan Optional 10 4 CHs Video Input 11 LAN Interface 12 Power Supply 13 14 10 8 16CH iil 4 gt 0 D i gt J F Y 000 0 0 DIE BAD AD me Pa T DE LCL 19 0 Os 3 prez aiT 9090090000 O 6 6 Sg me 615 No Icon N Icon 1 O CVBS Input Video Loop 9 16CH Alarm In 2 6 Audioimput____ l5 Power Switch MIC input output RS 485 Interface 8 VGA Output 9
13. open zone the pink is motion detection zone Schedule Click set button you can see an interface as shown as below Here you can set your own setup for business day and non business day 30 Trigger Delay System auto delays detecting for a specified time The value ranges from 10 300 Unit second Alarm output when alarm occurred system enables peripheral alarm devices Alarm duration Alarm output Set output time for alarm when motion detection complete The value ranges from 10 300 Unit second Buzzer Default is off Send email System can send out email to alert you when alarm occurs Channel select the channel to activate recording function once alarm occurred Please make sure you have set MD record in encode interface Main Menu gt gt Record gt gt Schedule PTZ activation Here you can set PTZ movement when alarm occurs Such as go to preset tour amp pattern when there is an alarm Click OK button to save it AAA TERA eS eee eee eee Tour Here you can enable tour function when alarm occurs Itis a one window tour Snapshot Enable or disable snapshot 5 3 2 Camera Masking By analyzing video when system detects camera masking it will start camera masking alarm 31 When someone viciously masks lens the system can alert you to guarantee video continuity You can select Alarm output PTZ Linkage Operation method Channel select the channel to record when camera m
14. operate the appliance beyond its specified temperature humidity or power source ratings Place the unit on a flat surface not prone to vibration or impact Use the appliance at temperatures between 0 C 45 C 32 F 113 F and humidity below 85 Install the unit away from heat sources such as radiators heat registers and stoves Installation of the unit near consumer electronics devices such as stereo receiver amplifiers and televisions is permitted as long as the air surrounding the terminal does not exceed the above mentioned temperature range Handle hard disk drives with care It is possible to damage hard drives if they are moved while their motors are still running To allow the hard drive to spin down and park its heads wait at least 10 seconds after disconnecting power before moving the unit To avoid shock and vibration damage to the internal hard drive do not move the unit while it is plugged in Protect hard disk drives from static electricity Do not stack hard disk drives or keep them upright Do not use an electric or magnetic screwdriver to fix hard disk drives Do not place the unit in an enclosed area where the cooling vents are blocked or impede the flow of air through the ventilation openings Protect the power cord from being stepped on or pinched particularly at plugs and the points where they exit from the apparatus Do not drop metallic parts through slots This could permanently damage the applian
15. process the downloaded data first if you enable this function Advanced Setting In advanced setting user can double click any list to set Email DNS DDNS PPPOE FTP Online User and so on There will be introduction of some important functions Note You should enable the relevant function with Y before setup Email Double click E mail Setting will bring up a dialog window where you can adjust the necessary settings SMTP Server Input server address and then enable this function Port Default value is 25 You can modify it if necessary SSL Security Socket Layer User Name The sender email account user name Password The sender email account password Sender Sender email address Title Input email subject here Receiver Receiver email address 38 Note Please fulfill the postfix of the mail address if it is virtual e g xxxx yyyy com otherwise it is not allowed e g xxxx DNS Domain Name Server These values depend on your actual account please contact your Internet Service Provider for details User can a primary DNS address and a secondary DNS address _ eee eee ee eee TEE DDNS In order to connect your DVR to the internet you may choose to use the services of a Dynamic DNS service Your DVR comes with several DDNS server names built in To be able to use these servers you need to go to the associated website to register for an account Once registered you choose the name of the DDN
16. settings to all channels 5 4 3 Network Setting You can configure network parameters in this interface Main Menu gt gt Setting gt gt Network Mietwork IP Address Your DVR supports several methods of being viewed online No matter which method is used your DVR must first acquire an IP address which it does via 2 different methods 37 Automatic acquisition of the IP address by the DHCP client model Manual indication of the IP address by the Static IP model Thus this field offers two options Static IP and DHCP Toggling these will either make the three following fields changeable in manual mode or not in auto mode these fields are IP Address Subnet Mask and Gateway Subnet Mask You can get information about subnet mask Subnet mask is a system of interconnections within a communications system that allows the components to communicate directly with each other The default subnet mask is 255 255 255 0 Gateway You can set gateway according to your net segment TCP Port It is 34567 by default When you use mobile phone to monitor you should input this port HTTP Port It is used to connect to the DVR web server By default the value of the port is 80 You can specify a different port number UDP Port It is 37778 by default Max Connection System supports maximal 10 users 0 means there is no connection Transfer Mode Set transfer mode latency self adaptive fluency LAN Download System can
17. test it for compatibility e Pioneer DVR XDO9C Appendix 4 List of Compatible Portable SATA DVD Recorders Only for 8CH and 16CH Please find below the list of tested portable SATA DVD recorders found to be compatible with the DVR If for backing up your data from the DVR you wish to use a DVD recorder not found on this list please test it for compatibility eLG GH22NS50 eSONY AD 7260S eSAMSUNG TS H663 eLITEON IHAS324 25Y 78 Statement OIf there is any doubt or disputability in manual you can call on our company and take its plain as authority OThis manual provide reference for seviral types machine and you can contact with our customer service department if you have any difficulty There maybe some different description with real device as our products are upgrading all along Please forgive us for not informing latest updating 79 MC 664 A 2
18. time you want to search Recording file list Double click any list to playback it After searching there will be a list of recording files double click any list to playback it Playback Control In the playback mode you can see the playback control panel as well as the date and time of the played file 19 w L 4 ri hy s x li F F i i an w ONS BETPOHeE o In the playback view you can drag an area with your mouse then click this area to zoom out this area Options for the playback control panel are described below EREEPELEERE OA Play Pause Rewind Pause Stop Slow forward Fast forward Pre frame This button will be able when the file is paused Next frame This button will be able when the file is paused Pre file Click this button to playback pre file Next file Click this button to playback next file Repeat playback Display single channel in full screen mode You can right click on your mouse to exit playback file and click again to exit playback interface 4 2 3 Video Backup There are two ways to backup recording files Method 1 Backup recording files according to time segment 1 Insert your USB disk or USB DVD burner into USB port 2 Look over your device Main Menu gt gt Record gt gt Record Backup In this interface user can get its free space and total space If you can not see USB disk in the list you can click button Detect to detect device 20
19. to the multi screen view you could either double click on the screen again or press the Multi button either on the remote control or the front panel You can choose to display the shortcut menu by single right clicking on the screen 4 1 2 Login System In live view press the button MENU once or click Main Menu on shortcut menu to display the main menu it will appear the login window seeeeveeceeeeeveeceeeaeeee 8808 PO eee eee eee eee EE SYSTEM LOGIN gt You can login from the LOGIN window as shown as previous fig Select user name and fill in user 17 password You can select username by pressing control button A FW J move cursor to password edit bar by pressing control button and switch input method by pressing REC button You can access the main menu by pressing OK if the password is enabled The default password for Admin is 888888 For your convenience and system safety you can change password of admin and add other users 4 1 3 Shortcut menu Right click on your mouse to display shortcut menu as figure on right hand Main Menu Enter system configuration menu Record Playback Search recording files and playback it Record Control Set recording modes Record Backup Backup recording files Alarm Output Clear alarm or set alarm type Pan Tilt Zoom Control PTZ Pan Tilt Zoom set preset pattern border and tour Color Setting Set color for each channel
20. 00 FPS D1 NTSC 120FPS CIF 120F NTSC 240FPS CIF 240 NTSC 480FPS CIF 480 PS HD1 120 D1 FPS HD1 240 FPS D1 FPS HD1 480 FPS D1 Scheduled Record Normal Record Motion Detection Alarm Trigger Manual Record eee crue neg Up to 2TB for each one SATA interface HDD 8 or HDD 4 DVD RW TCP IP DHCP DDNS PPPOE E Mail NTP FTP RTSP IP Filter UPNP Live Monitor Playback Configuration Backup Mobile Phone Surveillance Mouse Portable Mobile HDD Flash Drive USB DVD Burner Normal Fast Forward Slow Forward Rewind Single Step RJ45 100M 1000M Ethernet Auto Detect PELCO P PELCO D PANASONIC SONY etc Support area covered for each channel Backup files in DAV or AVI format for USB disk and in DAV format for USB DVD burner DC 12V 3A AC 220V 10 C 40 C 10 90 315x232x57mm 430 443 96mm Mose lindaa Sensor In Out utes Network Procol Network Faction Network ere Power adaper cients Model dependent Congratulations on purchasing your state of the art Digital Video Recorder DVR offering the industry s best triplex functionality with video audio recording playback and network capability Your new device allows you to run all three functions simultaneously streamlining the use of your CCTV system and boosting the security level of your home business or social venue You can access live or recorded feed from your standard or PTZ cameras immediately at the locatio
21. 2 Hour and 24 Hour representation This option will take effect after saving and exiting Audio Set Set audio source and volume for talkback Language Use this option to change the language of the DVR menu text and the On Screen HDD Full Select record mode between Overwrite and Stop Record when HDD is full DVR Number Set device ID it will be used for remote keyboard operation Video Standard Select of the preferred video standard Available options are NTSC and PAL Display Mode Select display position among TV VGA and HDMI Note User can press button MULTI and button Enter to switch display mode Resolution Select the preferred VGA output resolution Depending on the model you can make your choice among 1024x768 1280x720 1280x1024 1920 x1080 Note User can press button MULTI and button W to switch display mode 5 4 2 Encode Setting You can set encode resolution frame rate bit rate type quality bit rate and iframe interval Main Menu gt gt Setting gt gt Encode 36 Channel select channel number Compression H 264 Resolution D1 HD1 CIF Frame rate PAL 1 25 f s 25 levels optional NTSC 1 30 f s 30 levels optional Bit rate system supports two types CBR and VBR Quality There are six levels ranging from 1 to 6 The sixth level has the highest image quality Bit rate 768kb s 4096kb s optional Frame interval can set 1 frame 2 12 optional Copy the same
22. 4 Ss Alam CIID piece ies aul NE earl aN seek Sete ar bits Sah oda alt ta deta Ad 34 DOO MO A O 35 JAS YSTEM SETTINGS O 35 ALE Setn fs AA AA e Sat Na bs Ne ne etait aids Se EA ras 36 54 ACA SS UA AAA AA Meret iy rer emt rent Tre 36 Fle SIN GOW OTK SS CULIINS acid 37 NS A AS RO Oo OA AD PORE a aia 40 JAS ACCOUN SENO A A E A A RS 40 34 OPIZ SetiD eg lalo 43 SA RON FD RA E AR TT SAA TASAS ERA E aan E A Ca ha 44 DAS TOMES UI ra e AAA EE A A A AE A 44 ADVANCE EDS ETT ATA 45 5 9 DE 45 592 ISO SEAS iS AA A RADA AR AR SAA AD abl 45 E OA ION SE SE EA SEAS ARA A AS 46 O 46 A O RO E RON 47 OSA DOWN AA SA AAA A ne een aye 47 35 6 INFORMAT ON AAA AA andes AAA AAA AA A 47 SOMA ORO ON rt IS RAS ERAS EA AOS DIE Co 48 5 OPA B KOLPE A atch pats saa canbe dass toca saeco E E E ain ors ee aeons DT E 48 OBO asa o ia n 49 Re NSO O O IS II O A aah legen II 49 6 WEB BROWSEROPRERATIO Ni ii 50 6 1 SOFTWARE ENVIRONMENT a A Gb asco A Ai tias 50 6 2 NETWORK SECURITY SEE TUNG AS a a ains 50 GS CONNECTION SETTING mia tran a E E A O A Ais he 51 6 4 CONTROL DOWNLOAD AND INSTALLATION c ccccsssccceesccccccceseecessesssssnnssnseeceeeeeccecceeeeeeeseseesenaaaaaeeeeeeeeceeceeeees 53 625 OPERATION INTERFACE hien ee oei e aeee aa aeea Eaa OE e E a aaae ae Aeae E ae E EE OERA EENT 53 o Mt O A E E T tek E E RN 53 0 5 2 COMERCIANTE SAA As 54 AS densa ate aE aree eaa aee ibaa eTe Teee EEE EOE EEEn SEOSE OIT 54 NA R OR ache se ieee E E ce Gob E A A RR E
23. 5 5 3 Configuration In this interface you can export parameters to your USB disk or import parameters from your USB disk Main Menu gt gt Advanced gt gt Configuration Coni gurasoon output into a file named cfg coi Import Connect to the USB interface on the rear panel with the USB equipment select setting file to input 5 5 4 Maintenance In this interface you can set a time to auto reboot system and set time to auto delete old files Main Menu gt gt Advanced gt gt Maintenance RSP RPP Pe Te PSST Tees erap raa RRR Re ee ee do Nanenane eee tet Here you can set auto reboot time and auto delete old files methods You can select proper setup from dropdown list After all the setups please click save button system goes back to the previous menu 46 5 5 5 Default In this interface you can reset some parameter to factory default Main Menu gt gt Advanced gt gt Default Detault 5 5 6 Shut Down In this interface you can logout system shut down machine restart system and switch users Main Menu gt gt Advanced gt gt Shut Down Logout exit menu you need to provide password again when entering the menu next time Shut down machine logout system turns off power Restart system system begins rebooting Switch switch users 5 6 Information Next menu tab in the Main Menu is Information User can get information about HDD information BPS Log and Version Main Menu gt gt Info
24. E 45 08 o Tunes Password jxzxw 163 com No Rati INSTALL Watch real time network cameras from around the world for FREE Add your own cameras too for watching your home or business or favorite public cam remotely 24 hours a day View streaming video in the palm of your hand at the touch of a finger anytime anywhere Great for nanny cams surveillance cameras baby cams IP cameras network cameras Web cams spy cams TIY security cameras traffic and weather cams public cameras etc Alsfofr eln ujk zilei eini Fig 4 fig 5 Search 74 atl PE E T4F5 11 Re s 4 ae Te YouTube Mobile Eye Waiting Phone Safari Fig 6 MM indicates that the VS500 software is downloading When the EIM process bar display status the VS500 software has finished installing After installing VS500 the iphone screen will display the screen shown in Fig7 all HESA E 45 14 n as hke a 4 ere Settings 9 3 Ix YouTube KWeye ES CS APlayer Naway Calculator Fig 7 2 How to use VS 500 1 Click the VS 500 icon to open the VS 500 to set up parameters 75 Device IP DVR IP address Device Port TCP Port 34567 by default User name Login User Name Admin Password Password 888888 by default al DE BA E 7 4 4 58 o gt sl Ela E T 4 59 Z Camera Setup Login deviceip 59 33 82 52 CA la 34567 username Admin password
25. E GE 56 6 5 3 nage A E A E E A E R EEE AO REEN 56 6 5 6 Others Oper t o sareen eenean a e e aa t aea lamba ei a ELEn aE E eniT 56 O RECORD OUBRY A E E iat cae E E N A O 56 6 TALARM CONFIG A AD EAN A A AO A OAO 57 60 3 SYSTEM CONFIESA AAA AAA R E AA AAA A AAA Ov eR a 57 OPO ly Sle til MIO AR SA AAN E AE EARL RA NANA 57 R VSS SG ITN ete as oe uh ek cas lai auch cat haus us au ci EE oe wa be tcasle E nates 58 0521 General CUMIN id od ias 58 09 202 PACO A E AA RENA ER ESA eee NA 58 A O reeee tree err eter renin E Po ree eee en rent EA Ter tees Sere ter eee ann ai Deter reer nr nine Metra See 59 6 8 3 Net Sethin n a a ts dada rieite visa dats holier E E eran inka dante 59 OS FM AMIN AAA O acces II 59 A CLIN ia trek crt cantare E tad a each a aue E A EA A 59 00 DDNS Setting tail 60 0 9 3 A UPN A Aes ee 60 A A ht vabhovennassnrad eabauserst ives E E 61 2 A O 61 A nat nnn ot Sere gt ere reer na serer Tart net frac Mec naeen rT aormncr en Teeter rene Tenn rer 61 68 AG VAC SA DELO Jie die A i secede id ane Src i Sa Sa A as Aa Nt ee E A iaa 61 09 ABOUT A NA ian me ernie en eee 62 Ov OO G OUT snes ors a ttaiennatauaalinciestotitansacthes tatu bansnciiteaneSubdcanct ena Conguaacta ster Cans I cecubauteciashce erases ssesGeeebereatnerttasenta 62 Te MOBILE PHONE SUPPOR E wast icin ila mies itd i tilts RT saue tale A gaat cate 62 TL WINDOWS MOBILE EA Geen cae ene aan AAA 62 1 2 SYMBIAN PHONE oes steacith aa te ra nsec a Guba ceaoitted ne uaa untc
26. HDMI Output Power supply 3 3 Remote Control In device operation the enter key on the remote control or the front panel has the same function as a mouse left click The IR Range of the remote control is up to 10 meters The buttons on the remote control correspond 1 1 with the buttons on the front panel 11 1 Wi Clears the alarm input or alarm output Status Recording control Has the same 2 REC function as the REC button on the device s front panel Numeric Input numbers or select to change 3 buttons relevant channels Enter the main menu Switch from the single window view mode to multiple split view mode Functional Return to upper menu same as the Buttons button on the front panel Enable PTZ control same as the PTZ button on the front panel Play in slow mode rewind Iris Play Pause Tris Stop Playback Control Change speed for play back or fast forward Zoom Go to next frame Focus Function access to auxiliary settings Picture Buttons for zoom in or zoom out Adjustment Parameters Buttons for adjusting focus Arrow Similar to the functions of arrow Buttons buttons on the front panel 8 DEL __ DELETE button 3 4 Mouse Control You can use a mouse to operate the DVR as well The mouse operates just like a mouse on a Windows PC Please connect the mouse to the USB connector in the back panel and please note that you can hot plug the mouse 12
27. P etc Setting channel name front output coding output masking etc User group and account PTZ control protocols and bit rate Setting series port and bit rate 26 Advance d Setting Informat ion HDD Management Setting preview tour time etc HDD management delete data and etc Note System will restart after setting HDD Upgrade system through USB disk Export parameters to USB disk or import parameters from USB disk Set time to auto reboot system and select modes to auto delete old files Default Shut Down HDD Information Reset some parameters to factory default Logout system shut down machine restart system or switch users SATA interface status capacity for each HDD and total remaining capacity video start stop time etc Type read write disk read only disk redundancy disk etc Each channel s bit rate and occupied HDD capacity per hour Display important event log and designate needed log Display system hardware software version and release date etc 27 5 1 1 Menu Options In order to modify adjust system configuration you need to enter the System Menu by pressing the Main Menu button on the shortcut Menu E Advanced Information You will see the dialog window with settings for all systems and options available in your DVR The settings are subdivided into 5 subsections each with its own tab Record Alarm Setting and Information Below i
28. Pam ipari te bs d 100 Bap Cole Sethe ie Channel Here is for you to select a channel Encode Format H 264 Data stream Sub stream AV enable Video Audio System only displays video by default You need to manually enable audio function Image Size CIF QCIF Differentiating rate stocking differentiating rate s type is CIF or QCIF Frame rate The value ranges from 1f s to 25f s PAL and 1f s to 30f s NTSC Bit rate There are two options CBR and VBR You can only set video quality in VBR mode Bit rate number set bit rate according to web status 10kb s 4096kb s adjustable 58 Frame interval can set 1 frame 2 12 optional Image color brightness contrast color saturation and AGC for selected channel OSD Overlay time title overlay Click copy as following chart showing 6 8 2 3 Record Setting Schedule includes the following interface When DVR boots up it is in 24 hour continuous record In this interface you can set record type record time and period Record type includes regular record R motion detection record M and alarm record A Channel select the channel number you desire Week you can select from the dropdown list Or you can select at the bottom of the interface Prerecord system can record the three to five seconds video before activating the record operation into the file Depends on data size Period There are six periods for you to set Please click set button of
29. S Server from the list by pressing the arrow buttons located at both ends of the corresponding field and input the DDNS name user name password Afterward 1t should automatically connect PPPOE These values depend on your actual account please contact your Internet Service Provider for details In this interface you should input username and password then an IP address will appear in this interface ae UPNP Set external HTTP Port and TCP Port which mapped in Internet 39 External HTTP Pon 890 External TCP Port 34567 Cancel 5 4 4 Display Setting You can configure display parameters in this interface Main Menu gt gt Setting gt gt Display Channel Name Set name for each channel Time Display Show or conceal time on each channel Channel Display Show or conceal channel name Record State Show or conceal record state Alarm State Show or conceal alarm state TV Adjust Move the entire video screen up down left and right Transparency Set transparency for menu display Channel Select channel to set private masking and set position to display time Private Masking JEnable or disable private masking If private masking was activated you should select a number to set private masking You can set four pieces of area covered at most Time Display Set position for time display Channel Display Set position for channel name 5 4 5 Account Setting You can manage users in this interf
30. SDK Version Copyright C 2009 6 10 Logout Click Logout to log out of system 7 Mobile Phone Support A state of the art feature of this DVR device is transmitting live feed from the CCTV cameras to your mobile phone so that you can have on the go access to your surveillance system from virtually anywhere in the world Currently there are a limited number of phones that can support this feature Windows CE Mobile Symbian S60 3 Edition OS Android Blackberry and Iphone 7 1 Windows Mobile Note Prior to using this feature you should apply for the Internet connection service for your mobile phone such as 3G or 3 5G Please contact your mobile service provider for details You can only watch one live feed channel at a time with your mobile phone Split mode and playback of recorded files is not available at the moment From the installation CD install file vsS00Setup cab onto your Windows Mobile phone See your phone user manual for more details on application install Find and execute program VS500 and click the Setting button to setup the IP address for your DVR 62 5500 100 0 Ling In the ensuing screen input the user name default Admin password device port TCP port and IP address for your DVR Server Input the value for the Port default 34567 and choose the channel for streaming data from the dropdown menu 15500 1 00 0 AARAAKARAAA AES Select a camera
31. ace Main Menu gt gt Setting gt gt Account 40 Modify User You can modify user s name memo group and set permissions There are 2 default users Admin guest Admin users have administrator right The default password 1s 888888 for Admin and 123456 for guest guest user only can review Local replay and Net replay Local preview and Net preview Reusable function this function allows multiple users use the same account to login Once select the user to a group the user authority can not surpass this group authority property We recommend that normal user s authority lower than other advanced user Mody User Modify Group In this interface you can edit name for group set memo and set permissions for group 41 Modity Group Modify Password you can select the name you want to change password and write a new password Before set new password you should fill in old right password Modit Password dr 00 id LIIT LLLI TI Add Group You can add new group and set its permission 42 Delete User Click this button after select a user to delete it 5 4 6 PTZ Setting Channel Select the camera channel number whose settings you want to modify Protocol Select the PTZ device protocol It must be consistent with the protocol of the actual PTZ cameras installed You can make the choice among available options Pelco D Pelco P Panasonic
32. an use this function if your DVR is connected to a PTZ camera Pan Tilt Zoom Pressing the button Pan Tilt Zoom on the shortcut menu will bring the corresponding video feed into the single screen mode In the screen you will see the special PTZ menu Di GU BW A 1 Directional buttons Control the direction of the PTZ cruise Please refer to your PTZ manual for details of PTZ scanning mode 2 Next Page Press this button to enter advanced function and it will be introduced in following 3 Speed Sets the turning speed of PTZ camera Adjust numbers for adjusting this setting 23 4 Zoom Click to zoom in zoom out 5 Focus Click to focus in and focus out this function is disabled for cameras with automatic focus 6 Iris Click to make the image brighter or darker this function is disabled for cameras with automatic iris adjustment 7 SET Click this button to enter setting interface and you can set preset tour pattern and border If you click Next Page you will enter interface as following BR UU N e NO Input number to use Pattern Start up pattern Auto Scan Start up auto scan Flip Turn over image Preset Call on preset point Tour Start up tour Auto pan Circumrotate PTZ flatly Reset Reset parameter of PTZ Auxiliary Operation Click ON to open and OFF to close Different functions respond to different protocols The auxiliaries include light wiper power etc P
33. annel switch full screen magnify PTZ control focus and exit function 2 System main interface After the a press VS500 icon in the application to enter login interface LL CESS All p ropra ams Phone Device IP DVR IP address Device Port TCP port 34567 by defaulted Username Login User Name Admin Password Password 888888 by default After inputting device IP device port username and password click Login to login system An interface will appear to select camera you want to monitor the picture as following 66 EE Click Plor A to control PTZ direction upward or downward If you click on UP Down it will switch to Left Down and you can control direction to left hand or right hand COTE Click or El to adjust relevant parameter If you click on Zoom it will switch to Focus or Iris Video Click it to enter camera selecting interface Full Click it to display image in full screen mode aay we About Click it to get information about this software vid s Full About Exit Click it to exit 7 4 Blackberry Mobile 1 Program installation 1 Copy the setup software VS500 alx and VS500 cod to your PC 2 In order to be able to install applications and themes via BlackBerry Desktop Manager firstly the PC should install Blackberry Desktop Manager BlackBerry Desktop Manager will be known as DM otherwise the phone cannot establish the connection w
34. ask occurred Enable function enable switch Sensitivity there are six levels Schedule Click set button you can see an interface is shown as below Here you can set for business day and non business day You can set up six time period but they can t be repeated The Alarm output when camera masking occurred system enables peripheral alarm devices Alarm duration when camera masking system auto delays detecting for a specified time The value ranges from 10 300 Unit second Buzzer Default is Off Send email System can send out email to alert you when alarm occurs Channel select the channel to activate recording function once alarm occurred Please make sure you have set alarm record in encode interface Main menu gt Record gt Schedule 32 PTZ activation Here you can set PTZ movement when alarm occurs Such as go to preset tour amp pattern when there is an alarm Click select button Tour Here you can enable tour function when alarm occurs Itis a one window tour Snapshot Enable or disable snapshot 5 3 3 Video Lost By analyzing video when system detects video lost it will start video lost alarm Video Losi Operation method Channel select the channel you want to enable lens shading alarm Enable function enable switch Period Click set button you can see an interface is shown as in below Here you can set for business day and non business day You can set up s
35. ce Turn the power off immediately and contact qualified service personnel for service Handle the appliance with care Do not drop or shake as this may damage the device Do not expose the appliance to water or moisture nor try to operate it in wet areas Do not install the unit in an area where condensation occurs Do not operate with wet hands Take immediate action if the appliance becomes wet Turn the power off and refer servicing to qualified service personnel Moisture may damage the appliance and also cause electric shock Do not use strong or abrasive detergents when cleaning the appliance body When the dirt is hard to remove use a mild detergent and wipe gently Do not overload outlets and extension cords as this may result in a risk of fire or electric shock Please make a note of your settings and save them This will help when you are required to change the system configuration or when an unexpected failure or trouble occurs Distributing copying disassembling reverse compiling reverse engineering and also exporting in violation of export laws of the software provided with this product is expressly prohibited CARING FOR THE ENVIRONMENT BY RECYCLING When you see this symbol on a product do not dispose of the product with residential or commercial waste Recycling your Electrical Equipment Please do not dispose of this product with your residential or commercial waste Some countries or regions such as the Eu
36. e repeated The linear graphics show the period you can copy the setting to other days Alarm out activate peripheral alarm device when motion detection occurred Trigger Delay Here is for you to set proper delay duration Value ranges from 0 to 600 seconds Buzzer Default is off Send email System can send out email to alert you when alarm occurs Record channel you can select proper channel to record alarm video Multiple choices PTZ activation Here you can set PTZ movement when alarm occurs Such as go to preset tour amp pattern when there is an alarm Post record It sets the record time of duration before alarm is activated Tour Here you can enable tour function when alarm occurs Itis a one window tour Snapshot System can capture the selected channel 5 3 5 Alarm Output You can set alarm type and get information about alarm output in alarm output interface Main Menu gt gt Alarm gt gt Alarm Output The interface is the same as section 4 2 5 Alarm Output 34 5 3 6 Abnormity You can set alarm type when abnormity events had triggered in this interface Main Menu gt gt Alarm gt gt Abnormity Abnormity Event type no disk space hard disk error Not enough space network failure IP address conflict No disk space DVR does not connect to the disk or hardware is error Disk error The system can not recognize because of disk error Not enough space Not enough space for the disk the
37. ere will be an icon named VS500 in application interface KWeye Mi Bee FEA opt Mix Tour Options Device IP DVR IP address Device Port TCP port 34567 by defaulted Username Login User Name Admin Password Password 888888 by default 6 After configuration select Login to login system A interface will appear as following to select camera you want to monitor Select a camera then click Back to enter live interface wt Click Plor 2 to control PTZ direction upward or downward If you click on UP Down it will switch to Left Down and you can control direction to left hand or right hand ETS Click or El to adjust relevant parameter If you click on Zoom it will switch to Focus or Iris Login Click it to enter setting interface Camera Click it to enter camera selecting interface Full Click it to display image in full screen mode Exit Click it to exit 65 7 3 Android Mobile 1 Install the program 1 Copy the software VS500 Android V1 00 0 apk to your Android phone or copy to SD card 1 2 Open your ES File Explore in android phone and find the VS500 Android V1 00 0 apk file in your android phone memory or SD card Click Mora sao 00 0 apk to install software LCA OBO LS a gt 76 Do you want to install this application Allow this application te A de de A 2 Start vs500 software VS500 provide video surveillance ch
38. ered you choose the name of the DDNS Server from the list by pressing the arrow buttons located at both ends of the corresponding field and input the DDNS name user name password Afterward 1t should automatically connect 6 8 3 4 UPNP Set external HTTP Port and TCP Port which mapped in Internet O ts ie Da Paidar 0 da Ieper Pap TI gt a 420 Receptor Dad Shares oron e E i 60 6 8 4 Alarm Setting User can set alarm input alarm output video detect and exception deal There are introduction of the main functions below 6 8 4 1 Alarm In User can set alarm input parameters in this menu Son rou E O feet ol G fee ices om iets keie Setar Gt imoa i Hajaj Dpi Go econ t F iomh Fac tal Piece y jajajaj rl jalea data roo Beijar E gar AO El diam tanta T id ygu P Apam ser pap e Dl Adare Cet M tor cred fs ajajajaja el lil ee ol nn ny 40 rompan Deal Dto lio E esp dr Ea me lila lalelelrlelo lleida HO ppe sra aS sow sia MO dato Haimre 6 8 4 2 Alarm output User can get information about alarm output and set alarm type Da ae tet x da Ck O viens Corba ilia daja O veie Finke MO acord Setting E hte Ai i ipa O apa erty 4 i O viens forty AO decai Finke MO acord Setting RO data Heimar 61 6 9 About It introduced version about web control NET SDK and Play SDK Web Control Version NET SDK Version Play
39. finding the VS500 alx file for the application highlight it and click open Look in a Desktop A 3 My Documents LD F my computer My Recent amp Jmy Network Places Documents E codloader VS500 alx Ej Desktop D My Documents 5500 alx Application Loader Files alx ali File name My Network Files of type 8 You will now return to the Application Loader screen From here you should see VS500 now listed with Install under the Action column shown as follows 69 t Connected BlackBerry Desktop Manager LI x BlackBerry Desktop Manager nader Options Help T ME E itotaseye_E000 AA wes00 Device connected Pile 9 Select VS500 and click Next to go to next interface Connected BlackBerry Desktop Manager it BlackBerry BlackBerry Desktop Manager ial 1 1 Options gt Heip gt Summary Your Blackbeny deco will be updated to include the folowing sofware 3500 Deve commected PIM 10 Click Finish to start install software After installation an interface will show as folling Connected Blackberry Desktop Manager p ae UT BlackBerry BlackBer Desktop Manager eo Update complete The kadng operados was success Deco connected AM 70 2 System explanations VS500 phone port has the following capabilities and functions live video surveillance channel switch full screen display PTZ c
40. he cameras individually 2 Menu Access tool bar 3 Close upper interface or controls 4 Manually stop start recording 5 DEL Assistant function such as delete the character which input in the textbox 6 Play Pause Playback or paused mode click this button to realize normal playback PTZ control enter the PTZ control mode Activate current control modify setup increase decrease numeral assistant Up down function such as PTZ menu Switch tab in main menu Shift current activated control When playback click these buttons to co Left right playback bar LED lights indicate recording status IR Remote Receive remote control signal Control 8 16CH Jefe Pwr Power button press for 3 seconds to shut down DVR Remote control NS Receive remote control signal Use these USB ports to connect the mouse and backup devices ES indicator Light 1 16 channel indicator Light SHIFT Switch between function and numeral Assistant function PTZ control and image color In PTZ menu assistant shift PTZ control menu Confirm current operation Enter Enter System menu in review window power LED lights indicate your connection to the power supply LED HDD Activate current control modify setup increase decrease numeral Up down assistant function such as PTZ menu Switch tab in main menu Shift current activated control When playback click these buttons t control playback bar Left right Switch cursor
41. he following information Log types include system operation configuration operation data management alarm event record operation log clear and etc Pleased select start time and end time then click search button You can view the log files Please page up down button to view if there are more than ten files 5 6 4 Version In this interface you can get information about channels alarm in alarm out system version and release date Main Menu gt gt Information gt gt Version d ETS 49 6 Web Browser Operation Install the software through the IE browser of OS to operate the network remotely and conveniently DVR supports C S B S and access in LAN and WAN It also supports IP and domain name visiting 6 1 Software Environment Hardware Recommend Hardware requirement CPU Pentium 2 8G or above Dual core Memory 2G or above HDD 7200 SATA 32M 500G or above Display Video card with YUV output gt 64M video memory Ethernet 1000M Software Windows XP WindowsVista winodws7 DirectX 9 0c above 000 00000 RESTRICTION CONDITION To ensure PC s stable visiting of DVR we recommend Windows XP or Win7 6 2 Network Security Setting Prior to control installation please program the network security level by using the following operations 1 Open the IE browser and click Tools Internet Options 2 Choose the Security label in the dialogue box Internet Options General Security Privacy Co
42. his publication may include technical inaccuracies or typos The manufacturer holds the right to introduce any changes to the information contained herein for any purpose including but not limited to improvements of the publications and or related to the product at any time without prior notice DISCLAIMER OF WARRANTY The supplier shall not be liable to any party or any person except for replacement or reasonable maintenance of this product for the cases included but not limited to the following E Any damage or loss including but not limited to direct indirect consequential special exemplary use arising out of or related to the product E Inappropriate use or negligence of the user in operation of the product resulting in personal injury or any damage EW Unauthorized disassembly repair or modification of the product by the user E Any problems or consequential inconvenience loss or damage caused by connecting this product to devices of the third parties E Any claim or action for damages brought by any photogenic subject be it a person or organization due to violation of privacy whereby the surveillance picture and or saved data becomes public or is used for the purpose other than surveillance SAFETY INSTRUCTIONS Read these instructions and keep them in a safe place for future reference Please refer all work related to the installation of this product to qualified service personnel or system installers Do not
43. ice data Device connected PIN 205EFE2D Check for updates BlackBerry Desktop Manager v4 7 08 Research In Motion Limited Fig 2 5 Click on Application Loader to enter into its interface In this screen you have two options to select from Select Add Remove Applications shown as follows ft i y Connected BlackBerry Desktop Manager BlackBerry BlackBerry Desktop Manager E Application Loader Options Help Y a Add Remove Applications A Update Software Add new applications to your device or remove existing Update your device software applications Notifications for software updates Check for updates Device connected PIN 208EFE2D tan Mar 6 You should now see something like what you see below From this screen click Browse shown as follows 68 Connected BlackBerry Desktop Manager BlackBerry BlackBerry Desktop Manager Options Help Y R Application Loader Device application selection you want to add to your device or clear the application that you want to Total application space 2 MB Version 6 0 3 MobileEye_8900 Y kWeye 1 0 ran mens Device connected PIN BlackBerry Desktop Manager v4 7 Once you click Browse you will see a file search screen like the one below Go to and locate where you saved the application files Make sure you saved both the alx file and cod file in the same folder After
44. in Screen Switch on your DVR and wait for the system program to load When you enter the system you can see the main screen The standard layout is eight windows or sixteen windows depending on your device evenly distributed over the screen From the main screen you can access menu options and switch among channel views displaying either all channel feeds simultaneously or bringing forth a full screen view of a selected channel 16 After starting up videos will be outputted on both VGA HDMI and TV but the menu will be only displayed on one side There are two ways to switch menu between VGA and TV 1 Main Menu gt gt Setting gt gt General gt gt Display Mode gt gt HDMI VGA TV 2 Press button MULTT then ENTER on front panel to switch output Note After installing a HDD at first time you should format it Main Menu gt gt Advanced gt gt HDD Manage gt gt Format 4 1 1 Displaying a Single Channel In the multiple screen view you can make a particular window active by left clicking on it once with a mouse If an audio output device is connected to this channel you can monitor both audio and video feeds To enter a single channel view you can press the corresponding numerical buttons on the remote channel number is displayed in the bottom left corner of each window alternatively you can do so by left double clicking on the desired window or by choosing View 1 on the shortcut menu In order to return
45. ind your DVR from remote computers by using DDNS Dynamic Domain Name System which dynamically assigns IP addresses to the DVR This functionality allows the DVR to automatically update its IP address to the DDNS Server each time its Dynamic IP address changes Your DVR is equipped with the DDNS functionality and has a list of related domain names through which you can acquire an IP address See Section 5 4 3 for details Setup an account with a DDNS service provider and with the account information available login to the router and go to the DDNS page Select the address of your service provider and type in the account password After saving the router will send IP updates to your DDNS account and the connection will always be forwarded to you current IP Appendix 2 Compatibility Table for HDDs Please find below the list of tested Hard Disk Drives found to be compatible with the DVR If you want to use a HDD not found in this list please test 1t for compatibility before use Seagate ST3500418AS 7200 12 ie STs SV35 3 500G SATA ist Seagaesrsomsinas SATA A fan wo eave green WEAS 2 SATA Samsung HD103SI 1T SATA Hitachi HDP725050GLA360 500GB SATA 77 Appendix 3 List of Compatible Portable USB DVD Recorders Please find below the list of tested portable USB DVD recorders found to be compatible with the DVR If for backing up your data from the DVR you wish to use a DVD recorder not found on this list please
46. ith the PC 3 Connect your BlackBerry mobile phone to your computer via the USB cable that came with it or any USB cable that fits Start the DM 4 Before the installation open the BlackBerry Desktop Manager Shown as the red sign on the following pictures Figl means the phone isn t connected to the PC Fig2 means the phone has been connected to the PC aBa Mo om D L Disconnected Blackberry Desktop Manager AA BlackBerry Desktop Manager Main Menu Options Help Y Media Manager Application Loader Backup and Restore Manage s ring tones videos Update add or remove device Back up or restore your device and pictur your device applications data Transter data from a BlackBerry Change options for synchronizing device or other device to a email messages and organizer BlackBerry device data al Device Switch Wizard _ Synchronize 22008 Research In Motion Limited Fig 1 67 J 7 T i Connected BlackBerry Desktop Manager Ads 2 2 Ble Py Sr de BlackBerry BlackBerry Desktop Manager Main Menu Options Y Help y Media Manager Application Loader Backup and Restore Manage songs ring tones videos Upe dd or remove device Back up or restore your device or your applications data Device Switch Wizard _ Synchronize Transter data from a BlackBerry Change options for synchronizing device or other device to a email messages and organizer BlackBerry dev
47. ix time period but they can t be repeated The linear graphics show the period you can copy the setting to other days Alarm output when video lost occurred system enables peripheral alarm devices Alarm duration when video lost system auto delays detecting for a specified time The value ranges from 10 300 Unit second Buzzer Default is Off Send email System can send out email to alert you when alarm occurs 33 Channel select the channel to activate recording function once alarm occurred Please make sure you have set alarm record in encode interface Main menu gt Record gt Schedule PTZ activation Here you can set PTZ movement when alarm occurs Such as go to preset tour amp pattern when there is an alarm Tour Here you can enable tour function when alarm occurs Itis a one window tour Snapshot Enable or disable snapshot 5 3 4 Alarm Input Setting at Main menu gt gt alarm gt gt alarm input According to the introduction of 3 5 1 Basic Connection please make sure you have properly connected alarm devices such as Alarm lighter User can save each channel configure or save once till all channels are set Alarm input Alarm input select alarm channel number Enable function enable switch Type normal open or normal close According to your alarm device Schedule Here you can set for business day and non business day You can set up six time period but they can t b
48. l setup to another After setting in channel 1 you can click Paste button and turn to channel 2 and then click copy button You can finish setting for one channel and then click save button or you can finish all setup and then click save button to memorize all the settings 5 2 2 Search You can search recording files in video playback interface Main Menu gt gt Record gt gt Search The interface is the same as record playback interface you can refer to section 4 2 2 Record Playback 5 2 3 Record Backup You can backup recording files in video backup interface Main Menu gt gt Record gt gt Record Backup The interface is the same as video backup interface you can refer to section 4 2 3 Video backup 5 3 Alarm Setting Next menu tab in the Main Menu is Alarm Under this tab the administrator can define how the DVR will respond to various alarms from the motion detection camera masking video lost alarm input alarm output and abnormity Following is the description of the possible options 29 i Advanced Settings HDD management USS Update etc 5 3 1 Motion Detection By analyzing video when system detects sensitive moving signal it will start motion detection alarm Motion Detection Operation method Channel select the channel you want to implement motion detection Enable function enable or disable Sensitivity System supports 6 levels Region can set 396 22 18 zones The transparency is
49. larm connectors and one Ground connection Connect Alarm Out to the corresponding connections and Ground accordingly For detailed description please see Section 5 3 4 Alarm Input Sensor Alarm ps a Sensore 4 PTZ Sensor Sensor Alar PT 4CH 8 16CH E Ethernet For remote access to the video images from your cameras via LAN or the Internet please connect the standard RJ 45 twisted pair Ethernet cable to the Ethernet connector USB For connecting the mouse USB flash drive USB portable HDD USB portable DVD Recorder The USB mouse is hot pluggable NOTE The device only supports FAT32 file system on the USB devices 3 5 2 Installing Hard Disk Drive DVR need install HDD first we recommend high speed HDD 7200rpm or higher and the SATA cable included in package and the HDD must be formatted before recording We take the 16CH mode as the example 1 Loosen the screws on the top cover 2 Open the cover 3 Put the HDD on the HDD bracket 14 5 Fix the HDD bracket on the DVR HDD bracket 7 And then connect power cord to the HDD 15 8 Close the DVR enclosure and screw firmly 3 5 3 PTZ Control Connections optional Connect the PTZ control jacks to the corresponding RS485 A and B interfaces on the rear panel d Sensor Lara PTZ Sensori Sensor Alara PT For detailed description of PTZ protocols baud rates and IDs please refer to the setup section in the PTZ manual 4 1 The Ma
50. lease refer to your PTZ manual for details 10 Auxiliary Number It should be used with Auxiliary Operation 4 2 7 Color Setting Press button Color Setting on the shortcut menu to enter color setting interface etree rs COLOR SETTING s E OD 0 0 UN uN FR User can set two periods to set hue brightness contrast and saturation for each channel respectively 4 2 8 TV Adjustment By pressing the button TV Adjust on the shortcut menu you will bring up the TV Adjust screen 24 You can move the entire video screen up down left and right using this option 4 2 9 Logout Press button Logout on the shortcut menu to logout menu user 4 2 10 Screen View Modes View1 View4 View6 View8 View9 View16 Allow you to switch between single multiple screen views 1 screen 4 screen 6 screen 8 screen 9 screen modes or 16 screen modes OK confirm the adjusted position Cancel cancel the introduced position changes 4 3 Channel Status Display The top right corner of each channel image features the following status icons Icon indicates that the channel has detected motion in the motion detection mode ere Icon indicates that the channel is recording at the time 5 DVR Settings 5 1 Main Menu Main Sub Menu Function Menu Schedule Time setting for common record motion detection external alarm Time operated setting per day per week Period time for record 7 receive external alarm signal motion detection v
51. n CD disk 4 2 4 Record Control Press the button Record Control on shortcut menu will bring up a following dialog for record control You can set record mode for each channel schedule recording manual recording or stop recording In schedule record mode videos will be record according to your setting in section 5 2 1 SCHEDULE see PRR PR Oe Te ee ee SST PCPS TTP PRS eee Cancel 29 For detailed description of scheduled see Section 5 2 Record Settings Description of the manual recording function follows In order to record a video audio feed please select the REC button in the Tool Menu to enter record control interface and select Manual to start manual recording Alternatively you can use the REC button on the remote or the front panel If you choose Stop it will stop recording Press OK to confirm or press Cancel to undo your choice 4 2 5 Alarm Output Press the button Alarm Output on the shortcut menu to display alarm output interface Alarm Type There are two types for you to select schedule and manual Schedule Set alarm output when alarm is triggered Select all for all the channels 1 e for the first channel 2 e for the second channel 3 e for the third channel 4 e for the fourth channel Manual Set alarm output all the time You can set every channel respectively Stop Close alarm output Status Current device alarm output status 4 2 6 PTZ Control You c
52. n menu Among which Pan Tilt Zoom and color setting applies for current selected channel If you are in multiple window mode system automatically switches to the corresponding channel Press In numeral input box Increase or decrease numeral value middle Switch the items in the check box button Page up or page down Mov pve Select current control or move control mouse Select motion detection zone Drag mouse Select privacy mask zone 3 5 Hardware Installation It is recommended that the installations described below are carried out by qualified personnel Right click mouse 3 5 1 Basic Connections E Cameras Connect each of the cameras outputs to the video input socket in the rear panel of the DVR using appropriate cables The video input interface is a standard BNC connector 1 Vp p 75 O Please keep the video signal cable away from strong electromagnetic and electric interference E Audio Connection The audio input interface is a standard BNC socket Please keep the audio signal cable away from strong electromagnetic and electric interference 13 E Monitor Connect the main output connector to a monitor or a TV screen Use a BNC to RCA converter if needed to work with the Audio Video RCA cable E Power Please use the 220V AC supplied for connecting your DVR device with the power source E Alarm Input Output optional Connect Alarm In 1 16 to N O Normally Open or N C Normally Closed a
53. n of the DVR installation or anywhere in the world using web browsers or a mobile phone The video may be stored at a remote location for safety Some limitations apply to web and phone based features please see the related sections for detailed description Please get acquainted with the parts and accessories as well as the ways to use the appliance as described in this instruction manual If you have any questions that this guide cannot answer please contact your vendor or a certified specialist 2 Contents of the Box e DVR device e Installation CD e Remote control e Power cord e Mouse optional depends on the model e Hard disk drive optional depends on the model 2 1 Getting Started Check List Before starting to work with your new DVR please make sure all relevant connections are done correctly a Are the power and video in out cables plugged in Please see Section 3 5 1 Basic Connections for more b Is the HDD installed Please see Sections 3 5 2 Installing Hard Disk Drive for more c Did the DVR start recording Please see Section 4 2 4 Record Control for more 3 Hardware 3 1 Front Panel Please take actual machine model as quasi Front panels are different in term of different machine model The front panels as follows are for reference 4CH No Name Icon Function Channel Using these buttons you can choose to output video on your monitor either switch as a full screen view of each of t
54. ntent Connections Programs Advanced Select a Web content zone to specify its security settings p e amp o 2 Local intranet Trusted sites Restricted sites Internet A This zone contains all Web sites you haven t placed in other zones Security level for this zone Custom Custom settings To change the settings click Custom Level To use the recommended settings click Default Level 3 Click Customization level to enter into the security setting 50 Security Settings Settings 16 ActiveX controls and plug ins 4 Automatic prompting for ActiveX controls 5 Disable PS _ Enable 14 Binary and script behaviors Q Administrator approved OQ Disable _ Enable 4 Download signed ActiveX controls Disable Enable lt Prompt 14 Download unsigned ActiveX controls Fada lt Reset custom settings Reset to Medium Set the ActiveX control and pluggable unit Select the following options y ActiveX control auto prompting V Run the script of the ActiveX control which is marked to be that can safely implement the script Y Implement initialization and run the script of the ActiveX control which is not marked to be that can safely implement the script Y Binary system and the script behavior Y Download the unsigned ActiveX control Y Download the signed ActiveX control y Perform the ActiveX control and pluggable unit It s extremely importation to enable the items ab
55. nterface Full Click it to display image in full screen mode Set Click it to set RTSP port and stream type Set RTSP Port 554 Stream Type Extra Stream RTSP Set RTSP port according DVR Stream Type Select type between extra stream and main stream Exit Click it to exit 7 5 Apple Iphone 1 VS500 installation Open IPhone App store as follows 72 Fig 1 Click Po button and search for VS500 It is a free application nil PHBA E F4 4 35 o vs500 pro Q wie R t yjuj tjojp ajsjofrjafufs xj fro lv ninio E e E Fig 2 Click i and you will see following screen 73 nll DEA E T 45 08 O GaP No Ratings FREE Watch real time network cameras from around the world for FREE Add your own cameras too for watching your home or business or favorite public cam remotely 24 hours a day View streaming video in the palm of your hand at the touch of a finger anytime anywhere Great for nanny cams surveillance cameras baby cams IP cameras network cameras Web cams spy cams security cameras traffic and weather cams public cameras etc 9 Search Fig 3 Click A Free as shown in Fig 3 It will display the screen shown in Fig 4 Click the install button shown in Fig 4 A Install and it will display the screen shown in Fig 5 Input your Apple account password then click a The screen will look like the one shown in Fig 6 aml DEBT
56. ntrol PTZ direction Set the turning speed of PTZ camera Zoom Zoom in or zoom out ocus Focus in or focus out Iris Make the image brighter or darker 6 5 5 Image Adjustment Others You can set bright contrast hue and saturation by dragging the bar in this interface 6 5 6 Others operation Image Snapshot Path Set a path in PC to save capture images Record Path Set a path to save recording files Reboot Click this button to reboot device Record Size Set record size range from 200MB to 1024MB 6 6 Record Query ord Query I And D pue Han 7 ramie eii O dl darn T bissa Feco T Fetus Bii Playback Fir raas arn nrar ya a at we i i Select recorded type start time end time recorded channel then click Query to search file In the list underside you can select any recording list and click Play to playback files or click Download to download file You can monitor cameras and playback recording files at the same time You can also playback your local record file and view picture 56 6 7 Alarm Config Alarm Type Select any alarm type depending on your demand Operation Set operation mode when alarm triggered Alarm Sound Set a sound to alarm out when alarm triggered 6 8 System Config 6 8 1 System Info In the main window click config button you can see an interface is shown as below x ti System Information Click device config
57. ontrol including zoon focus iris image capture save as favorite and exit function System main interface After the installation press VS500 icon in the application see the below picture gt oles AM To TRL iG 3 System login interface Open the main interface see the configure interface as bellow Modify your parameters as necessary Device IP 116 78 93 200 Device port 34567 Username Adimin Password oe i Network Wifi Device IP DVR IP address Device Port TCP Port 34567 by default User name Login User Name Admin Password Password 888888 by default Network Type WIFI or others Login Click this button to login live interface Cancel Click this button to exit system 3 System Live interface After setting your configurations press Login to login device list and click Cancel button to exit Please refer to the below picture Device list Click this button to show device list and choose the one you want to connect 4 Connect to DVR After choose cameras you will enter live interface 71 Login Camera Full Set 4 Up Down gt Click Plor A to control PTZ direction upward or downward If you click on UP Down it will switch to Left Down and you can control direction to left hand or right hand CATS Click or E to adjust relevant parameter If you click on Zoom it will switch to Focus or Iris Camera Click it to enter camera selecting i
58. ove Prompt Before control installation please turn off the fire wall and the anti virus software 6 3 Connection Setting The remote access for the hard disk recording machine should be carried out through the network In the local area network connection the IP address of the client side computer must be in the same network section with that of the hard disk recording machine While in the wide area network connection just ensure that two sides can visit the public network and connect through the IP address or the dynamic domain name The following will mainly focus on the connecting and setting method for the local area network Step 1 Right click on Network neighborhood and click Attribute in the ejected menu to open the Network connection Step 2 Double click to open Local connection 51 Step 3 Click Attribute Local Area Connection Status Connection Status Connected 00 44 11 100 0 Mbps Duration Speed Activity Packets Properties Allows your computer lo score resources on a Miergenit neto _ Show iton in noticetion wea when connected E Motiy me when thir connection hat imited of no connect Step 4 Double click Internet protocol TCP IP Internet Protocol ICE Properties You can pel IP settings acagned gulcmatosyd pour rete puppis the capably Dlhermita you need bo mi pour network adiriristuados hol the appropraste IF pe
59. percentage of free space will be showed Network failure The network connection disrupted or network connection error IP conflict The IP address of disk recorder network is fixed the conflict will occur once there is another same IP is set in the internet Enable function enable switch reverse means on Alarm output when exception occurred system enables peripheral alarm devices Alarm duration system auto delays for a specified time The value ranges from 10 300 Unit second Buzzer Default is off Send email System can send out email to alert you when alarm occurs 5 4 System Settings GR System Setings General Account Encode Network PTZ Tour etc 3 35 5 4 1 General Setting You can set system time date format auto logout time date separator DST time format audio set language HDD full DVR number video standard display mode and resolution Main Menu gt gt Setting gt gt General Parii erie System Time Adjust the current date and time of the DVR Date Format Toggle data format among yyyy mm dd dd mm yyyy and mm dd yyyy Auto Logout Set time for auto logout Date Separator Select a symbol as data separator from and DST Daylight saving time enable means DST is enabled Click button Set to enter DST setting interface You can setup the start time and end time for DST Time Format Toggle time format between the 1
60. rmation 47 Information A System Information HDD BPS Loas Version 3 3 5 6 1 HDD Information In this interface you can get information about HDD Main menu gt gt Information gt gt HDD Information Here is to list hard disk type total space free space video start time and status Note Please remove the broken hard disk before you add a new one Once there is a hard disk confliction please check hard disk time and system time is the same or not Please go to setting then general to modify system time At last reboot the system to solve this problem If you want to view recording time of some HDD you can select it and click View Recording Time to get time for start recording or end recording Note means current HDD is normal X means there is error means there is no HDD Please remove the broken hard disk before you add anew one If disk is damaged system shows as After system start if there is conflict will jump to HDD information page immediately user can check the system time and HDD time If conflict please enter normal setup to modify system time or enter advanced HDD management to format HDD then restart device 5 6 2 BPS Here is for you to view current video data stream KB s and occupied hard disk storage MB h 48 5 6 3 Log In this interface you can search log file Main Menu gt gt Information gt gt Log Here is for you to view system log file System lists t
61. ropean Union have set up systems to _ collect and recycle electrical and electronic waste items Contact your local authorities for information about practices established for your region COPYRIGHT STATEMENT All rights reserved No part of this publication may be reproduced in any form or by any means transcribed translated into any language or computer language transformed in any other way stored in a retrieval system or transmitted in any form or by any means electronic mechanical recording photocopying or otherwise without the prior written permission of the owner Table of Contents LIMITATION OE VU BAN arras A A A AA A A E E 2 DISCEATVIE OF WARRANTS AO Ida 2 SAFETY INSTRUCTIONS os iS A E AS E AD A AAN 2 COPYRIGHTS TATEMENT or A E E E SEAE EA OERE A AE EEA EO EE EER AEAEE E 4 TABLERO CON TENES pr ada 5 l YOUR DVRATA GLANCE ea A A A ES A AiO 7 2 CONTENTS OFTHE BOX rtia de S E AA AA AE EEE EEES EERE 8 2 1 GETTING STARTED CHECK LIST E 8 3 HARDWARE a O E Oa ES AR E dd ced A E E Nau din Neds 8 3 1 FRONT PANEL PLEASE TAKE ACTUAL MACHINE MODEL AS QUASI sssssssssssessssssessrssressessressessressessressessresressres 8 3 2 BACK PANEL PLEASE TAKE ACTUAL MACHINE MODEL AS QUASI c cesssscesseceesseecesseeeeeseeeesseeeseeeseeeeesseeeennees 10 3 3 REMOTE CONTROL SO RAS ASA EA A AA AA A a 11 34 MOUSE CONTROL AAA AAA AAA TIRA AAA A 12 33 HARDWARE INSTALLATION ia ANA RA E AAA AA AA AA 13 Sioa Basto CONNECT E Ai IAE A ES RAE E
62. s the detailed description of these settings In system configuration you can use button A and Y to switch tab use button 4 and P to select sub menu Right clicking on your mouse to exit current menu 5 2 Record Settings User can set recording schedule search recording files and back up files 5 2 1 Schedule When the system boots up it is in default 24 hour regular mode You can set record type and time in schedule interface Main Menu gt gt Record gt gt Schedule Schedule Channel Please select the channel number first You can select all if you want to set for the 28 whole channels Redundancy System supports redundancy backup function You can highlight Redundancy button to activate this function Please note before enable this function please set at least one HDD as redundant Main Menu gt gt Advanced gt gt HDD Management Pack Duration Set pack duration for video file Pre record record the video previously than motion detection 99 66 Record control single option e means selected there are schedule manual stop 3 options Week day There are eight options ranges from Saturday to Sunday and all Time period means current channel is recording in this period Recording modes include common recording motion triggered recording and alarm triggered recording it can be single or multiple choices 6 time periods to set Also allows you to copy one channe
63. the corresponding period Please note all the setup here shall be in one day E g 00 00 to 24 00 4 0 6 8 3 Net Setting User can set Email DNS DDNS UPNP PPPOE NTP FTP and RTSP There are introduction of main function 6 8 3 1 Main Setting id inal ater laa az Bi Bibel AURA ij fan BA iy Sea a Ae EGG ERA FES oe ada a E t ANQGONGOSTT TERT PTET ig El 00041008 y SMTP Server Input server address and then enable this function Port Default value is 25 You can modify it if necessary User Name The sender email account user name Password The sender email account password 9 Sender Sender email address Title Input email subject here Receiver Receiver email address Note Please fulfill the postfix of the mail address if it is virtual e g xxxx yyyy com otherwise it is not allowed e g xxxx 6 8 3 2 DNS Setting Domain Name Server These values depend on your actual account please contact your Internet Service Provider for details User can a primary DNS address and a secondary DNS address 59 iee tates 6 8 3 3 DDNS Setting In order to connect your DVR to the internet you may choose to use the services of a Dynamic DNS service a et are ome o o hen Peed E e Your DVR comes with several DDNS server names built in To be able to use these servers you need to go to the associated website to register for an account Once regist
64. tipe ct a statu sa uuksiudense a a e sa 64 TA ANDROID MOBILE E tis Sa cas te des adidas DAS AS di clasts 66 74 a ey Go tt MOBIL cmemerseere ert te ene nreent oo ere renter ARA Oman Ten ear reer ARANA sere enor arene eee 67 ES ACREB IPHONE di EE emer cee ney ema eT Pe nD re A A 72 Appendix 1 Setting Up Internet Connections For Remote ACCESS cccccsscccsssseeeseeeesseeesseeceseeeceseeeesseeeessaeeeseeeenes 76 Appendix 2 Compatibility Table For GS ti A AAA AA A AA 77 Appendix 3 List Of Compatible Portable Usb Dvd Recorders coooocconocccooocccononccononncnonnnonononononnnonnonnnnonnconnnccnn nacos 78 Appendix 4 List Of Compatible Portable Sata Dvd Recorders Only For 8ch And 16ch ooooooccnnccnocccionccconoconncnno 78 1 YOUR DVR AT A GLANCE Product Overview 4CH 16 CH PATS H 264 Baseline Compression BNC 4Iuput CVBS output aoe Patan ee BNC 16 Input CVBS Output Spot suena Out Video Loop VGA Output HDMI VCA output Loop VGA Output HDMI G 71la BNC 8 Input 1 Line BNC 16 Input 1 Line in Microphone 1 eee WU in Microphone 1 Output Output Motion detection Sensor Input Relay Output Video Loss Camera masking No Disk space Disk error Not enough space Network failure IP Conflict 4CH Input 1CH Output 16CH Input 4 CH Output Each Channel PAL 25 FPS NTSC 30 FPS CIF Half D1 D1 Recorded frame rate PAL 100FPS CIE PAL 200 FPS CIF 200 PAL 400 FPS CIF 400 FPS HD1 100FPS HD1 100 D1 FPS HD1 200 FPS D1 4
65. to monitor it The main window of the Mobile Phone applicati Settings buttons orl on offers the choice of channels Connect and 4 Up Down A Click Plor D to control PTZ direction upward or downward If you click on UP Down it will switch to Left Down and you can control direction to left or right ETS Click or El to adjust relevant parameter If you click on Zoom it will switch to Focus or Iris 63 Login Click it to enter setting interface Camera Click it to enter camera selecting interface Full Click it to display image in full screen mode About Click it to get information about this software Exit Click it to exit 7 2 Symbian Phone Please see a sample installation process shown below The N97 will be taken as an example to introduce installation 1 Copy VS500 Symbian V 1 03 1 R 101203 sisx to your mobile from the installation CD 2 Open file management on your mobile and find VS500 Symbian V1 03 1 R 101203 sisx you have copied SSeS Serbian 1 001 005 1415004 Syrian 41 004 1 Options 3 Select Options and a dialog will displayed which indicates Install VS500 You should choose Ok to continue the following steps after you choose OK a serious of dialogs will appear as picture below select continue 64 4 After selecting Ok on last picture above the software will start install After installation th
66. tti 2 Qbten an IP address sulomnahcally 5 Lipa the bolos IP addere F address Subnet mask Default gateway Dhian DONS server sadder abona E Ung the lobos DHS perras adderer Breland ONS serve HA Adele ONS see a Step 5 Examine the IP address subnet mask and default gateway on the PC 32 Step 6 Set the corresponding IP address subnet mask and default gateway on the DVR refer to 5 5 5 Network Setup If the subnet mask and default gateway on DVR are the same with those of the PC then the IP address must be in the same network section but cannot be the same with the used one Otherwise it will cause IP address conflicts Take the figure above as an example the IP address should be 192 168 0 X wherein X cannot be 40 or 1 including other IP addresses currently being used and cannot surpass 255 the subnet mask is 255 255 255 0 and the gateway is 192 168 0 1 6 4 Control Download and Installation After finishing the aforementioned settings open the IE browser input http 192 168 0 X 192 168 0 X is the setting IP address of the DVR and confirm If the http port of DVR setting has been changed not 80 it s will be must to add colon port number assume that the current port number is P like http 192 168 0 X P for correct visit Then the network will download and install the control automatically After connecting to the internet IE will automatically download the file to PC as follows The system will
67. uration button you can see the following interface Hardware version HDD information Interface Log inquiry System Setting Setting includes the following items General Encode setup Schedule RS232 Network MUL DDNS FTP Alarm setup Detect Pan Tilt Zoom Tool Advanced set DVR s record auto maintenance al 6 8 2 System Setting 6 8 2 1 General Setting General interface is shown as below 90 09090904 THe Hil Poe Sdrdaagraad CER ie E Fi fey System time Here is for you to modify system time Please click Save after your modification Date format Here you can select data format from the dropdown list Date separator Please select separator such as Por Time format there are two options 24 H and 12 H HDD full there are two options stop recording or overwrite the previous files when HDD is full Language Select system language for DVR Device No when you are using one remote control to manage multiple DVRs you can give these DVRs serial numbers respectively Click address button in your remote control and then input the correct device number now you can control the DVR now Video standard PAL or NTSC for your reference only 6 8 2 2 Encode 90809808 090904 Encode setup includes the following items image Sa Pope Cate fal Bate rin Le fl Ete ss Combo Th Biaj Learn 1 bn hae ee A miom gt ad F as gt r seein an beredi MaRa MEA betray r D

SV814P or SV614P User manual

Contents

Download Pdf Manuals

Related Search

Related Contents