! CAUTION ! CAUTION - Underwater Kinetics
Contents
1. OPERATION BATTERY INSERTION Insert 4 alkaline C size batteries as shown below To do this orient the case in one hand as shown in the diagram Push battery 1 into the case and let it slide to the back Insert battery 2 into the opening and let it drop in front of battery 1 Now push batteries 3 and 4 into the opening Insert the reflector lamp into the case opening Push the bezel over the eLED lamp module and past the o ring Twisting the bezel clockwise will thread it onto the case O ring Bezel Lamp SAFETY SWITCH Module The SL4 eLED is turned ON and OFF by rotating the switch located at the base of the bezel or twisting the bezel in and out When using the switch the bezel must be screwed in all the way To prevent the sun light SL4 eLED from going ON accidentally screw the bezel out 2 full turns This deactivates the switch O RING SEAL For a good seal and smooth bezel rotation lubricate the o ring with silicone grease or petroleum jelly To avoid damage to the o ring and sealing surfaces do not use tools to remove the o ring Batteries CARE AND MAINTENANCE Keep area around the o ring seal clean If your light floods with water turn it off immediately After returning to shore or dive boat unscrew the bezel and rinse the contents with fresh water Allow all components to dry completely Reassemble the light to see if it still works If not return it to your UK dealer or to Underwater Kinetics for repair Remove the2. US SL4 eLED www uwkinetics com SL4 eLED BR www uwkinetics eu Thank you for purchasing the SL4 eLED high intensity dive light Its high brightness to size ratio makes it ideal for light weight travel Underwater you can stow it out of the way in a BC pocket for when you go over the wall or peer deep under a ledge As a backup tlight the SL4 provides plenty of illumination to finish your dive The high impact ABS case rubber protected bezel solid aluminum reflector and unbreakable LED light source are just a few examples of what makes UK the best choice SL4 eLED lights are the brightest in their class and designed to last SPECIAL FEATURES High intensity LED dive light perfect for travel and tropical night diving Unique eLED circuit allows SL4 light to burn brighter underwater eLED circuit delivers constant brightness eLED CIRCUITRY The eLED is designed to provide relatively constant brightness throughout most of the life of the batteries As the batteries are nearly depleted the brightness of the LED falls sharply but does not go out as happens with incandescent lamps This brightness can persist for several days as is shown in the graph below LEDs produce more light when they are cool Underwater the SL4 eLED actually burns brighter for almost half of the battery life due to the unique way that heat is conducted away from the LED The higher brightness consumes more power however and reduces the battery life
3. LE 8 degree the SL4 is opened due BRIGHTNESS 116 lumens z 120 to excess pressure VOLTAGE 5 2 V nominal 2 build up from battery BATTERY 4 Alkaline C LR14 AM2 z 80 gases To avoid harm BURN TIME 9 10 hr Alkaline when unscrewing SIZE 157 x 63 x 43 mm bezel point light away WEIGHT 431 g w batteries from yourself and any TEST DEPTH 150 m 10 je hd other persons nearby Ad CAUTION Batteries which are 1 loaded without observing the proper polarity 2 are not the same type brand name and CASE MATERIALS ABS Polycarbonate age or 3 are completely discharged can vent hydrogen gas and possibly cause an explosion e Load batteries according to the diagram shown on the light or in these instructions e Do not mix batteries of different type brand name or age e Discard all batteries as soon as they are drained or no longer produce light European Warranty Underwater Kinetics warrants that this product is free from defects in materials and manufacturing for a period of 10 years from the date of purchase under normal use In addition the Underwater Kinetics Limited Warranty covers materials used in its products to the original purchaser from the date of purchase as follows plastics for 10 years rubber for 3 years LED and electronics for 1 year rechargeable batteries for 90 days and lamps for 30 days This warranty is limited to the first purchaser of the product and is not not transfer
4. able This product is not warranted if it is modified or used inappropriately If the original retail purchaser detects a defect in the material or workmanship the product along with proof of purchase date should be returned postage prepaid to an authorized Underwater Kinetics dealer in the area or directly to UKE Underwater Kinetics Europe Underwater Kinetics agrees to repair or replace at Underwater Kinetics sole discretion any product found to be defective in material or workmanship within the time period specified above This warranty is not valid when handled by third parties which are not authorized by Underwater Kinetics or its distributors Nothing contained within these warranty terms detracts from your Statutory Rights Address all correspondence and returns to UKE Underwater Kinetics Europe GmbH Beethovenstr 279 42655 Solingen Germany Tel 49 212 242 13 0 Fax 49 212 242 13 30 E Mail info uwkinetics eu web www uwkinetics eu
5. he eLED lamp module and past the o ring Twisting the bezel clockwise will thread it onto the case O ring Bezel Lamp SAFETY SWITCH Module The SL4 eLED is turned ON and OFF by rotating the switch located at the base of the bezel or twisting the bezel in and out When using the switch the bezel must be screwed in all the way To prevent the sun light SL4 eLED from going ON accidentally screw the bezel out 2 full turns This deactivates the switch O RING SEAL For a good seal and smooth bezel rotation lubricate the o ring with silicone grease or petroleum jelly To avoid damage to the o ring and sealing surfaces do not use tools to remove the o ring Batteries CARE AND MAINTENANCE Keep area around the o ring seal clean If your torch floods with water turn it off immediately After returning to shore or dive boat unscrew the bezel and rinse the contents with fresh water Allow all components to dry completely Reassemble the torch to see if it still works If not return it to your UK dealer or to Underwater Kinetics for repair Remove the o ring before shipping To insure that active hydrogen removal catalyst is present in the torch replace the reflector lamp if it gets wet Do not store batteries in the torch for long periods of time They may leak and cause damage SPECIFICATIONS Av caution ae a a T Components of the SL4 OT ALGAS See SL4 eLED Brightness vs Time may be ejected when BEAM ANG
6. o ring before shipping To insure that active hydrogen removal catalyst is present in the torch replace the reflector lamp if it gets wet Do not store batteries in the light for long periods of time They may leak and cause damage SPECIFICATIONS POWER 3 5 watt A CAUTION LAMP High Intensity White LED AEE a Components of the SL4 BEAM ANGLE 8 degree etl lea lal may be ejected when BRIGHTNESS 116 lumens _ 1201 PEY opened due VOLTAGE 5 2 V nominal S to excess pressure BATTERY 4 Alkaline C LR14 AM2 9 build up from battery BURN TIME 9 10 hr Alkaline g gases To avoid harm SIZE x Hy in 40 when unscrewing x 63 x 43 mm 7 bezel point light away WEIGHT 15 2 oz 431 g w batteries ai from yourself and any TEST DEPTH 500 ft 150 m time hours other persons nearby CASE MATERIALS ABS Polycarbonate A CAUTION Batteries which are 1 loaded without observing the proper polarity 2 are not the same type brand name and age or 3 are completely discharged can vent hydrogen gas and possibly cause an explosion e Load batteries according to the diagram shown on the light or in these instructions e Do not mix batteries of different type brand name or age e Discard all batteries as soon as they are drained or no longer produce light Limited Lifetime Warranty Underwater Kinetics products are engineered for maximum performance and durability All products car
7. ry a Limited Lifetime Warranty to the original retail purchaser to be free from defective material and workmanship under normal and intended use In addition the Underwater Kinetics Limited Warranty covers materials used in its products to the original purchaser from the date of purchase as follows plastics for 10 years rubber for 3 years LED and electronics for 1 year rechargeable batteries for 90 days and lamps for 30 days In the event the original retail purchaser detects a defect in the material or workmanship the product along with proof of purchase date should be returned to an authorized Underwater Kinetics dealer or directly to Underwater Kinetics with the postage prepaid Underwater Kinetics agrees to repair or replace at Underwater Kinetics sole discretion any product found to be defective in material or workmanship within the time period specified above For the complete Limited Lifetime Warranty write to Underwater Kinetics or go to the web site www underwaterkinetics com Address all correspondence and returns to Underwater Kinetics 13400 Danielson Street Poway CA 92064 2009 Underwater Kinetics 400165 Rev 7 09 Thank you for purchasing the SL4 eLED high intensity dive torch Its high brightness to size ratio makes it ideal for light weight travel Underwater you can stow it out of the way in a BC pocket for when you go over the wall or peer deep under a ledge As a backup torch the SL4 provides plenty of illumina
8. tion to finish your dive The high impact ABS case rubber protected bezel solid aluminum reflector and unbreakable LED light source are just a few examples of what makes UK the best choice SL4 eLED torches are the brightest in their class and designed to last SPECIAL FEATURES High intensity LED dive torch perfect for travel and tropical night diving Unique eLED circuit allows SL4 light to burn brighter underwater eLED circuit delivers constant brightness eLED CIRCUITRY The eLED is designed to provide relatively constant brightness throughout most of the life of the batteries As the batteries are nearly depleted the brightness of the LED falls sharply but does not go out as happens with incandescent lamps This brightness can persist for several days as is shown in the graph below LEDs produce more light when they are cool Underwater the SL4 eLED actually burns brighter for almost half of the battery life due to the unique way that heat is conducted away from the LED The higher brightness consumes more power however and reduces the battery life OPERATION BATTERY INSERTION Insert 4 alkaline C size batteries as shown below To do this orient the case in one hand as shown in the diagram Push battery 1 into the case and let it slide to the back Insert battery 2 into the opening and let it drop in front of battery 1 Now push batteries 3 and 4 into the opening Insert the reflector lamp into the case opening Push the bezel over t
Download Pdf Manuals
Related Search