User Manual
Contents
1. Press ON TIMER button again to confirm minute setting Hour and minute number will stop blinking The unit is now standby for starting air conditioner automatically at the set time Tocancel ON TIMER press ON TIMER button again Note e The user can confirm ON TIMER during ON TIMER setting process by pressing SEND button e f there are no other buttons pressed within 15 seconds ON TIMER will be cancelled and the LCD display will return to show clock e After pressing ON TIMER button the LCD display will show the last on timer set by user with blinking hour number e When ON OFF TIMER is set the present time is not displayed e Press CLOCK button to see present time after ON OFF TIMER was set The LCD display will show present time about 15 seconds and return to show ON OFF TIMER If user press CLOCK button during the 15 seconds display of present time the operation will be CLOCK setting and return to ON OFF TIMER MS SVU0013 EN MS SVU0013 EN p65 7 S TRANE Wireless Remote Control In case of power failure ON TIMER will be automatically cancelled as there is no electricity in the air conditioner however the set time on the remote control is still displayed due to batteries The user has to cancel and set ON TIMER again or press SEND button to reactivate ON TIMER when the electricity is back to normal conditions OFF TIMER Setting You can set OFF TIMER to stop the unit automatically at an2. TRANE MS SVU0013 EN p65 1 Owner Manual NEW STYLUS Split System 1 5 Tons Convertible Type MCX Series 50 60 H 50 Hz Models Cooling Only MCX 512 GB MCX 518 GB MCX 524 GB MCX 530 GB MCX 536 GB MCX 042 GB MCX 048 GB MCX 060 GB 60 Hz Models Cooling Only MCX 512 G1 MCX 518 G1 MCX 524 G1 MCX 530 G1 MCX 536 G1 MCX 042 G1 MCX 048 G1 MCX 060 G1 July 2007 MS SVU0013 EN 20 7 2007 11 51AM S TRANE General Information Congratulations on your choice of a Trane mini split system These systems have been carefully designed and manufactured under strict Trane Worldwide Quality Standards to provide you with years of comfortable convenient cooling or heating cooling with a minimum of service This Owner Manual is given as a guide to start up operation and periodic maintenance by the user of MCX split system It does not contain the full service procedures necessary for the continued successful operation of this equipment The services of a qualified service technician should be employed through the maintenance contract with a reputable service company Read it completely before doing anything with your air conditioning system About this Manual Cautions appear at appropriate places in this Instruction Manual Your personal safety and the proper operation of this machine require that you follow them carefully The Trane Company assumes no liability for the inappropriate usage of the un
3. e Do not use rechargeable Ni Cd batteries because such batteries may differ from standard dry cell batteries in shapes dimensions or performance e Take out all batteries if you are not going to use the air conditioner for a long period of time 20 7 2007 11 51AM S TRANE Indicators on Infrared Remote Control CLOCK Displays present time ON TIMER Display ON TIMER when ON TIMER is set OFF TIMER Display OFF TIMER when OFF TIMER is set Transmission Indicator The transmission indicator lights when remote control transmits signal to the indoor unit SLEEP Mode Display sleep symbol after activating SLEEP mode Set Temperature Displays the set temperature 15 C to 30 C when FAN or POWERCOOL mode is selected The set temperature will be disappeared until FAN or POWERCOOL mode is cancelled or complete FAN Speed Display the selected fan speed level auto low medium or high Operation Mode Displays the current operation mode FAN COOL or DRY in cooling only system SWEEP Function Displays SW when sweep motor is activated 10 ECONO Mode 11 Displays ECONO when ECONO mode is activated POWERCOOL Mode Displays POWERCOOL when POWERCOOL mode is activated MS SVU0013 EN p65 Wireless Remote Control Operation Mode FAN Mode Press Mode button to select the operation mode FAN will be shown on the di
4. 9 ON TIMER Button Press this button to set the on timer of the unit operation 10 OFF TIMER Button Press this button to set the off timer of the unit operation 11 CLOCK Button Press this button to set the clock to the present time or see the present time after ON or OFF TIMER was set MS SVU0013 EN MS SVU0013 EN p65 5 S TRANE Wireless Remote Control 12 13 14 15 16 ECONO ec Sr ERE J608 HEAT AUTO pee ayn Fo LIGHT Button Press this button to turn on the LCD light POWERCOOL Button Press this button to accelerate capacity up ECONO Button Press this button to save energy SLEEP Button Press this button to control emperature while sleeping and press this button again to cancel SEND Button Press this button to confirm the operation of the unit according to he LCD display or press and hold for 5 seconds to toggle emperature unit between Celsius and Fahrenheit Installation of Batteries 1 Slide the back cover of the remote control down to take it off 2 Insert two dry batteries into the slot Be sure that the and directions are correct 3 Fix the back cover to the remote control as before Attentions e Batteries can be used approximately for one year under normal conditions e Always replace an identical type of two batteries at the same time e Do not use manganese dry batteries since they may cause a malfunction
5. Sitting in the direct air path of the air steam for long periods of time isn t good for your health Pay special attention when sleeping and when infants senior citizens and invalids are present in the room E Use only fuses of the proper amperage Making shift replacement such as a piece of wire should never be used Not only could the unit itself be damaged but such action could be the cause of a major fire E Water should not be applied directly to the unit for cleaning purpose Electrical shock may be resulted E Do not block or cover the return air grille or discharge grille Decreased performance as well as inability to operate normally could be resulted E Avoid getting objects such as sticks sand or stones into the return air or discharge grilles Since the fan revolves at high speed it is very dangerous Be especially careful with children E Be sure to always have the air filter properly installed when the unit is operated Otherwise dirt can get into the inner workings and cause damages E Do not use the air conditioner for preservation purposes Do not use it for preserving precision instruments foods plants animals works of fine arts etc performance or quality may deteriorate and animal or plant life may be shorter E Do not use flammable sprays near the air conditioner Such action could be the cause of major fire E Be sure the power is disconnect before maintenance Do not in
6. MENU button again Note If there are no other buttons pressed within 15 seconds OFF TIMER will be cancelled and the LCD display will return to show clock After selecting OFF TIMER setting the LCD display will show the last off timer set by user with blinking hour number When ON OFF TIMER is set the present time is not displayed In case of power failure OFF TIMER will be automatically cancelled as there is no electricity in the air conditioner TURBO Mode TURBO mode rapidly maximizes the present time is not displayed e Incase of power failure ON TIMER will be automatically cancelled as there is no electricity in the air conditioner cooling capacity in COOL or DRY mode With this simply mode the user can easily get the maximum cooling capacity and comfort Press MENU button and select TURBO mode setting by pressing either gt or lt The air conditioner will accelerate capacity up totally 20 minutes or until room temperature is lower than 18 C MS SVU0013 EN 20 7 2007 11 52AM When TURBO mode completely operates or is cancelled TURBO will be disappeared from the display and return to the former settings before TURBO mode To cancel TURBO mode either press MODE button or select TURBO mode and press MENU button again Note e The LCD display will not show fan speed and set temperature e Fan speed and set temperature cannot be changed while TURBO mode is selected e Incase
7. and 2 on the display will disappear To cancel SLEEP mode press SLEEP mode button again Temperature COOL MODE 23 0 22 5 22 0 0 1 2 Hour Note e Set temperature shown on the display still show the setting without 1 C added reduced but it will plus minus 1 C in the memory e Dwil disappear from the LCD display when SLEEP mode completely operates after one and half hours or is cancelled e In case of power failure SLEEP mode will be automatically cancelled ECONO Mode ECONO mode drastically saves energy with high efficient cooling capacity in COOL mode by reducing power consumption With this simply mode the user can easily get energy saving and comfort Press ECONO button ECONO will be shown on the display The air conditioner will operates at low fan speed and raise temperature by 1 C from set temperature To cancel ECONO mode press ECONO or MODE button again MS SVU0013 EN p65 Wireless Remote Control ECONO MODE COOLING The unit will operate at low fan speed and raise temperature by 1 C rom set temperature It will automatically return to normal operation when the air conditioner is switched off and on again Normal Econo azo arc a set POINT zc HOUR o 1 2 s 4s 67 8 9 0 12 START Note e ECONO mode operates only in COOL mode and automatically operat
8. of power failure TURBO mode will be automatically cancelled SLEEP Mode SLEEP mode automatically and gradually adjusts room temperature to provide great comfort during your rest Press MENU button and select SLEEP mode by pressing either gt or lt Press Menu button again to confirm SLEEP mode will be shown on the display After one hour operation of SLEEP mode the unit will automatically raise set temperature by 0 5 C After one and half hour operation of SLEEP mode the unit will automatically raise set temperature by 0 5 C again and on the display will disappear To cancel SLEEP mode either press MODE button or select SLEEP mode and press MENU button again Temperature COOL MODE 23 0 22 5 22 0 0 1 2 Hour MS SVU0013 EN MS SVU0013 EN p65 11 S TRANE Digital Wired Control Note e Set temperature shown on the display still show the setting without 1 C added reduced but it will plus minus 1 C in the memory e will disappear from the LCD display when SLEEP mode completely operates after one and half hours or is cancelled e Incase of power failure SLEEP mode will be automatically cancelled ECONO Mode ECONO mode drastically saves energy with high efficient cooling capacity in COOL mode by reducing power consumption With this simply mode the user can easily get energy saving and comfor
9. power supply is interrupted Wait until the power is resupplied and then operate the air conditioner Cooling is insufficient Check whether the air filter is clogged Clean it Check whether the thermostat setting is too high Set the thermostat to lower temperature Check whether windows or doors are opened If opened close it Check whether there are sources of heat in the room cooling is less effective Check whether the return air grille or the supply air grille on the indoor unit and outdoor unit are blocked If they are blocked remove obstacles to make air passage clear Check whether the fan speed is set at low Set the fan switch from LOW to MED or HIGH 20 7 2007 11 52AM d V UKAS QUALITY MANAGEMENT Trane A business of American Standard Companies www trane com For more information contact your local district office MS SVU0013 EN p65 005 THAILAND Literature Order Number MS SVU0013 EN Date Jul 2007 Supersedes Oct 2002 Stocking Location Bangkok Thailand Trane has a policy of continuous product and product data improvement and reserves the right to change design and specific ations without notice Only qualified technicians should perform the installation and servicing of equipment referred to in this publication 16 20 7 2007 11 52AM
10. ation Mode FAN Mode Press Mode button to select the operation mode will be shown on the display when FAN mode is selected Press FAN SPEED button to select the desired fan speed level and the display will show yale yr r t a atl Auto gt Low gt Medium gt High Auto Low Medium and High respectively Note In FAN mode the LCD display will not show set temperature and cannot adjust set temperature SLEEP ECONO and TURBO mode COOL Mode Press Mode button to select the operation mode will be shown on the display when COOL mode is selected Press either or V button to set the desired temperature between 15 C to 30 C Press FAN SPEED button to select the desired fan speed level and the display will show en 7 7 i Zaal Auto gt Low gt Medium gt High Auto Low Medium and High respectively 20 7 2007 11 52AM S TRANE DRY Mode Press Mode button to select the operation mode will be shown on the display when DRY mode is selected Press either or V button to set the desired temperature between 15 C to 30 C Press FAN SPEED button to select the desired fan speed level and the display will show yay FF t m Auto gt Low gt Medium gt High Auto Low Medium and High respectively Note e In DRY mode if the compressor stops working fan motor and SWEEP function will be stopped
11. cancelled whenever LOUVER function is selected ECONO mode cannot be activated during DRY mode operation LOCK Setting Press CLOCK button to set clock and will be shown on the display with blinking hour number Press either or V button to set the clock to the present hour Press CLOCK button again to confirm hour setting and minute number will be blinking Press either or V button to set the clock to the present minute Press CLOCK button again to confirm minute setting hour and minute number will stop blinking and the set time will be shown on the display Note If there are no other buttons pressed within 15 seconds clock setting will be cancelled User can confirm CLOCK setting during CLOCK setting process by pressing SEND button MS SVU0013 EN 20 7 2007 11 51AM Timer Operation Once you select the timer operation the settings are saved in the remote control Thereafter the air conditioner will start operating under the same conditions when you simply push the POWER button on the remote control ON TIMER Setting You can set ON TIMER to start the unit automatically at any desired time up to 24 hours as real time Press ON TIMER button ON symbol will be shown on the display with blinking hour number Press either or V button to set the desired hour Press ON TIMER button again to confirm hour setting and minute number will be blinking Press either or V button to set the desired minute
12. d when the unit is off The supply air grille will be fully opened when the unit is on The supply air grille will automatically stop sweeping when compressor stops operating and reactivate SWEEP function once compressor becomes operating SWEEP function is available only from 12 000 to 36 000 Btu h C F Toggle The optional feature offers you to change the temperature display from C to F or from F to C Press and hold both and V button for 5 seconds to change temperature display 11 20 7 2007 11 52AM S TRANE System Features 1 Watchdog There is a circuit in the system to watch the operation of the microprocessor 2 Compressor Delay Protection There is a time delay for restarting the compressor 3 Compressor Minimum on Time Once the compressor starts it will operate at least 24 seconds 4 Non Volatile Memory Auto Restart If there is a power interruption or failure and back to normal the control will automatically resume its operation with the same setting parameters except those related to time 5 Freeze Function To prevent the indoor coil freezing this feature will stop compressor when the indoor coil temperature is below 0 C 6 Defrost Function This feature will protect the system operating in heat mode under very low ambient temperature 7 Compressor Status Indicator This feature is the basic detection of compressor status by showing on the display while compressor is o
13. es when air conditioner is closed without exiting or canceling ECONO mode e Fan speed can not be changed while ECONO mode is selected SWEEP Function SWEEP function swiftly distributes air flow and helps provide better air circulation in the room with comfortable cooling Press SWEEP button SW will be shown on the display The air conditioner will automatically sweep the supply air grille back and forth To cancel SWEEP function press SWEEP or LOUVER button again Note e The supply air grille will be fully closed when the unit is off e The supply air grille will be fully opened when the unit is on e The supply air grille will automatically stop sweeping when compressor stops operating and reactivate SWEEP function once compressor becomes operating e SWEEP function is available only from 12 000 to 36 000 Btu h LOUVER Function LOUVER function provides you 5 levels of air flow direction as your desire with comfortable cooling Press LOUVER button to select the desired air flow direction Note e SWEEP function will be cancelled in case LOUVER is selected e LOUVER function is available only from 12 000 to 36 000 Btu h FRONT BLADE Function FRONT BLADE function offers you the optional supply air grille increasing air flow direction and circulation with comfortable cooling or heating Press FRONT BLADE button to open or close front supply air grille Note e The front supply a
14. fan motor and SWEEP function will operate when compressor operates e ECONO mode can not be activated during DRY mode operation CLOCK Setting Press MENU button and select CLOCK setting by pressing either gt or lt Press MENU button again to set clock and will be shown on the display with blinking hour number Press either or V button to set the clock to the present hour Press MENU button again to confirm hour setting and minute number will be blinking Press either or V button to set the clock to the present minute Press MENU button again to confirm minute setting hour and minute number will stop blinking and the set time will be shown on the display Note e If there are no other buttons pressed within 15 seconds clock setting will be cancelled 10 MS SVU0013 EN p65 Digital Wired Control Timer Operation Once you select the timer operation the settings are saved in the control Thereafter the air conditioner will start operating under the same conditions when you simply push the POWER button on the control ON TIMER Setting You can set ON TIMER to start the unit automatically at any desired time up to 24 hours as real time Press MENU button and select ON TIMER setting by pressing either gt or lt Press Menu button again to set ON TIMER and ON symbol will be shown on the display with blinking hour number Press either or V button to set the des
15. ill displayed due to batteries The user has to cancel and set OFF TIMER again or press SEND button to reactivate OFF TIMER when the electricity is back to normal conditions POWERCOOL Mode POWERCOOL mode rapidly maximizes the cooling capacity in COOL or DRY mode With this simply mode the user can easily get the maximum cooling capacity and comfort Press POWERCOOL button POWERCOOL will be shown on the display The air conditioner will accelerate capacity up totally 20 minutes or until room temperature is lower than 18 C When POWERCOOL mode completely operates or is cancelled POWERCOOL will be disappeared from the display and return to the former settings before POWERCOOL mode To cancel POWERCOOL mode press POWERCOOL or MODE button again Note e The LCD display will not show fan speed and set temperature e Fan speed and set temperature cannot be changed while POWERCOOL mode is selected e Incase of power failure POWERCOOL mode will be automatically cancelled 20 7 2007 11 52AM S TRANE SLEEP Mode SLEEP mode automatically and gradually adjusts room temperature to provide great comfort during your rest Press SLEEP button 2D will be shown on the display After one hour operation of SLEEP mode the unit will automatically raise set temperature by 0 5 C After one and half hour operation of SLEEP mode the unit will automatically raise set temperature by 0 5 C again
16. indicate to installers operators and service personnel of potentially hazardous situations which if not avoided MAY result in minor or moderate injury or malfunction of the unit Warranty Warranty is based on the general terms and conditions by country The warranty is void if the equipment is modified or repaired without the written approval of The Trane Company if the operating limits are exceeded or if the control system or the electrical wiring is modified Damage due to misusage lack of maintenance or failure to comply with the manufacturer s instructions is not covered by the warranty obligation If the user does not conform to the rules described in Owner Manual it may entail cancellation of warranty and liabilities by The Trane Company Important These instructions do not cover all variations in systems nor do they provide for every possible contingency to be met Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser s purposes the matter should be referred to your authorized Trane dealer MS SVU0013 EN 20 7 2007 11 51AM MS SVU0013 EN MS SVU0013 EN p65 Contents General Information Control Operation Wireless Remote Control Digital Wired Control System Operation Safety Precautions Maintenance Troubleshooting 20 7 2007 11 51AM oa BN Sr N 14 15 Control Operation Infrared Remote Cont
17. ir grille will automatically open when air conditioner is closed without closing FRONT BLADE function during the operation e FRONT BLADE function is available only from 12 000 to 36 000 Btu h LIGHT Button LIGHT button offers you the optional feature to lighten the LCD display at any time as you desire Press LIGHT button to lighten the LCD display for 5 seconds Note e Whenever you press any button from 6 00 pm to 6 00 am the LCD display will automatically be lightened SEND Button SEND button offers you the optional feature to activate or confirm the operations shown on the LCD display Press SEND button to activate or confirm the operations shown on the LCD display Note e Whenever you press any button from 6 00 pm to 6 00 am the LCD display will automatically be lightened C F Toggle The optional feature offers you to change the temperature display from C to F or from F to C Press and hold SEND button for 5 seconds to change temperature display MS SVU0013 EN 23 7 2007 17 00PM Name and function of buttons 1 Infrared Signal Receiver op tional Receives the signal from handheld remote control and transmits the signal to indoor unit 2 POWER Button Press this button to start unit operation Press this button again to stop unit operation 3 Temperature Setting Button TEMP Press this button to increase the set temperature TEMP V Press this button t
18. ired hour Press MENU button again to confirm hour setting and minute number will be blinking Press either or V button to set the desired minute Press MENU button again to confirm minute setting Hour and minute number will stop blinking The unit is now standby for starting air conditioner automatically at the set time Tocancel ON TIMER select ON TIMER setting and press MENU button again Note e If there are no other buttons pressed within 15 seconds ON TIMER will be cancelled and the LCD display will return to show clock e After selecting ON TIMER setting the LCD display will show the last on timer set by user with blinking hour number e When ON OFF TIMER is set the OFF TIMER Setting You can set OFF TIMER to start the unit automatically at any desired time up to 24 hours as real time Press MENU button and select OFF TIMER setting by pressing either gt or lt Press Menu button again to set OFF TIMER and OFF symbol will be shown on the display with blinking hour number Press either or V button to set the desired hour Press MENU button again to confirm hour setting and minute number will be blinking Press either or V button to set the desired minute Press MENU button again to confirm minute setting Hour and minute number will stop blinking The unit is now standby for starting air conditioner automatically at the set time To cancel OFF TIMER select OFF TIMER setting and press
19. it American Standard Inc 2005 MS SVU0013 EN p65 General Information About the Unit These MCX units are assembled pressure tested dehydrated charged and run tested before shipment The information contained in this manual applies to MCX units are designed to operate in cooling mode only and in cooling or heating modes Trane MCX series of mini split systems offer three styles of installation floor low wall and under ceiling with both LCD wireless remote control or wired control Trane MCX series provide flexibility and savings Note For model MCX 042 MCX 048 and MCX 060 there are only two styles of installation under ceiling and low wall Reception On arrival inspect the unit before signing the delivery note Specify any damage of the unit on the delivery note and send a registered letter of protest to the last carrier of the goods within 72 hours of delivery Notify the dealer at the same time The unit should be totally inspected within 7 days of delivery If any concealed damage is discovered send a registered letter of protest to the carrier within 7 days of delivery and notify the dealer Warning Warnings are provided at appropriate places in this manual to indicate to installers operators and service personnel of potentially hazardous situations which if not avoided COULD result in death or serious injury Caution Cautions are provided at appropriate places in this manual to
20. lter to direct sunlight for a long time Clean the air filter more frequently when the air is very dirty 2 Cleaning the front panel Do not pour water directly on the front panel to clean it Dust or wipe it lightly with a soft cloth If it is very dirty use a soft cloth soaked in water or neutral detergent Cautions Do not use water over 50 C to clean the front panel or it may become discolored Do not use benzine gasoline thinner polishing compound machine oil etc when cleaning the front panel or paint may peel off or it may become deformed or damaged Maintenance before prolonged idle period Operate the fan for about half a day to dry the inside of the unit Stop the air conditioner and disconnect the power by turning off the safety breaker Clean the air filter and return it to its original position Place the protective cover over the condensing unit Outdoor unit internal components must be cleaned periodically MS SVU0013 EN 20 7 2007 11 52AM MS SVU0013 EN MS SVU0013 EN p65 Troubleshooting S TRANE Before calling for service please check the following The air conditioner does not operate at all Check if the control ON OFF switch is OFF Turn the switch to ON Check whether the fuse has been blown or circuit breaker thrown Set the ON OFF Control Switch to OFF and turn on the circuit breaker or replace to a new fuse Check whether the
21. o decrease the set temperature 4 MENU Button Press this button to select modes or functions in the menu 5 MODE Button Press this button to select system operation mode In cooling only system a mode is selected in sequence as FAN COOL DRY and back to FAN 6 FAN SPEED Button Press this button to select fan speed HG MS SVU0013 EN MS SVU0013 EN p65 9 S TRANE Digital Wired Control Indicators on Digital Wired Control om oh CLOCK Displays present time 2 ON TIMER Display ON TIMER when ON TIMER is set 3 OFF TIMER Display OFF TIMER when OFF TIMER is set 4 SLEEP Mode Display sleep symbol after activating SLEEP mode 5 Room amp Set Temperature Displays the room temperature When FAN or TURBO mode is selected the room temperature will be disappeared until FAN or TURBO mode is cancelled or complete Displays the set temperature 15 C to 30 C when either or V button is pressed 6 FAN Speed Display the selected fan speed level auto low medium or high 7 Operation Mode Displays the current operation mode FAN COOL or DRY in cooling only system 8 ECONO Mode Displays ECONO when ECONO mode is activated 9 TURBO Mode Displays TURBO when TURBO mode is activated 10 SWEEP Function Displays sweep symbol when sweep motor is activated 11 Compressor Status Indicator Displays compressor status Oper
22. ower cord is too hot to be touched by hand The insulation of the power cord is exposed at any point The fuse is blown or circuit breaker trips frequently Malfunction or abnormal situation of the air conditioning system occurs such as a burning smell Do not inspect or service the air conditioner while it is operating Turn off the power supply before doing any inspection or service work The power cord should be kept away from furniture with sharp corners It may cause fire or electric shock When the air conditioner will not used for a long time be sure to turn OFF the power supply If you have any questions or problems with your air conditioning system please consult your nearest Trane dealer Adjust Air Flow Direction The supply air grille may be adjusted left right up or down manually Adjust the air flow direction properly otherwise it may cause discomfort and make the room temperature uneven Adjust Air Flow Direction with sweep option The sweep motor will sweep the supply air grille upward and downward For left and right air flow the supply air grille can be adjusted manually MS SVU0013 EN 20 7 2007 11 52AM MS SVU0013 EN MS SVU0013 EN p65 E TRANE Safety Precautions To avoid electrical shock or fire and possible injury the following points should be noted and strictly adhered to E Do not sit in the direct air path for long periods of time
23. perating Error Code amp Display Error code Description LED blinking Er OF Freeze protection yes E 02 Defrost function yes E m Compressor overload protection yes Er OY Anti overheat protection yes Er OS Low ambient protection yes Er 10 Room sensor error yes E n Deice sensor error yes Er R Freeze sensor error yes 12 MS SVU0013 EN p65 System Operation Operating Precautions The air conditioner must be properly installed by a qualified installer in accordance with installation instructions Anti Recycle Timer The control system has a built in 3 minutes anti recycle timer which helps to preserve the life of system components Anti recycle timer will operates as circumstances occur while the air conditioner is operating e Temperature setting is adjusted back and forth e ON OFF switch is turned ON or OFF e Room temperature reaches the set point e Power failure Once one of the above conditions occurs the anti recycle timer will start preventing the outdoor unit operation for approximately 3 minutes Freeze Protection The system is protected against low indoor coil temperatures Under certain conditions the LED indicating the protective function has been activated will blink together with error code 01 shown on the display System adjustment is not necessary Stop the air conditioner at once if any of the followings occurs The p
24. rol Unit Display and One touch Control Switch Display Panel Four lamps on the unit show operating status 1 FAN Lamp This lamp lights when the fan is operating 2 COOLING Lamp This lamp lights when the unit is in COOL or DRY mode of operation 3 TIMER Lamp This lamp lights when the system is being controlled by the timer 4 Compressor Lamp This lamp lights when compressor is operated One Touch Control Switch A This button is used for adjusting operation without remote control unit 4 MS SVU0013 EN MS SVU0013 EN p65 4 20 7 2007 11 51AM Infrared Remote Control Name and function of buttons 1 Infrared Signal Transmitter Transmits the signal to indoor unit 2 POWER Button Press this button to start unit operation Press this button again to stop unit operation 3 Temperature Setting Button TEMP Press this button to increase the set temperature TEMP V Press this button to decrease the set temperature 4 FAN SPEED Button Press this button to select fan speed 5 MODE Button Press this button to select system operation mode In cooling only system a mode is selected in sequence as FAN COOL DRY and back to FAN 6 LOUVER Button Press this button to adjust blade direction 7 SWEEP Button Press this button to activate or inactivate sweep motor to distribute air flow 8 FRONT BLADE Button Press this button to activate or inactivate front blade function
25. spect or service the air conditioner while it is operating Turn off the power supply before doing any inspection or service work E Be sure the power cord is kept away from furniture with sharp corners Electric shock or fire may be resulted E When the air conditioner will not be used for a long time be sure to turn off the power supply If you have any questions or problems with your air conditioning system please consult Trane dealer or The Trane Company 20 7 2007 11 52AM S TRANE Regular Maintenance Be sure to disconnect the power before inspection or maintenance of air conditioner 1 Cleaning the air filter Air flow is reduced and cooling efficiency impaired if the filter is clogged Be sure to clean the filter every two weeks during the cooling season 1 1 How to remove the air filters Remove each return air grille by pushing down and pulling forward Remove each air filter frame from the return air grille MS SVU0013 EN p65 Maintenance 1 2 How to clean the air filter Wash away dust from the air filter with clean water or vacuum it with an electric vacuum cleaner Note Once the air filter is washed dry it completely before returning it to its original position After cleaning be sure to return it to its original position Cautions Do not wash the air filter in water that is over 40 C or it may shrink Do not expose the air filter to fire Do not expose the air fi
26. splay when FAN mode is selected Press FAN SPEED button to select the desired fan speed level and the display will show ae a a Saal Auto gt Low gt Medium gt High Auto Low Medium and High respectively Note e In FAN mode the LCD display will not show set temperature and cannot adjust set temperature SLEEP ECONO and POWERCOOL mode COOL Mode Press Mode button to select the operation mode COOL will be shown on the display when COOL mode is selected Press either or V button to set the desired temperature between 15 C to 30 C Press FAN SPEED button to select the desired fan speed level and the display will show TR ee Da Cual t aa a mal Auto gt Low gt Medium gt High Auto Low Medium and High respectively DRY Mode Press Mode button to select the operation mode DRY will be shown on the display when DRY mode is selected Press either or V button to set the desired temperature between 15 C to 30 C Press FAN SPEED button to select the desired fan speed level and the display will show vale 7 moe Auto gt Low gt Medium gt High Auto Low Medium and High respectively Note c In DRY mode if the compressor stops working fan motor and SWEEP function will be stopped fan motor and SWEEP function will operate when compressor operates SWEEP function will be
27. t Press MENU button and select ECONO mode by pressing either gt or lt Press MENU button again to confirm ECONO mode ECONO will be shown on the display The air conditioner will operates at low fan speed and raise temperature by 1 C from set temperature To cancel ECONO mode either press MODE button or select ECONO mode and press MENU button again ECONO MODE COOLING The unit will operate at low fan speed and raise temperature by 1 C from set temperature It will automatically return to normal operation when the air conditioner is switched off and on again Normal Econo aro aro a ze HOUR eo 9 we Note e ECONO mode operates only in COOL mode and automatically operates when air conditioner is closed without exiting or canceling ECONO mode e Fan speed cannot be changed while ECONO mode is selected SWEEP Function SWEEP function swiftly distributes air flow and helps provide better air circulation in the room with comfortable cooling or heating Press MENU button and select SWEEP function by pressing either gt or lt Press MENU button again to confirm SWEEP function e will be shown on the display i The air conditioner will automatically sweep the supply air grille back and forth To cancel SWEEP function select SWEEP function and press MENU button again Note The supply air grille will be fully close
28. y desired time up to 24 hours as real time Press OFF TIMER button OFF symbol will be shown on the display with blinking hour number Press either or V button to set the desired hour Press OFF TIMER button again to confirm hour setting and minute number will be blinking Press either or V button to set the desired minute Press OFF TIMER button again to confirm minute setting Hour and minute number will stop blinking The unit is now standby for stopping air conditioner automatically at the set time To cancel OFF TIMER press OFF TIMER button again Note The user can confirm OFF TIMER during OFF TIMER setting process by pressing SEND button If there are no other buttons pressed within 15 seconds OFF TIMER will be cancelled and the LCD display will return to show clock After pressing OFF TIMER button the LCD display will show the last off timer set by user with blinking hour number When ON OFF TIMER is set the present time is not displayed e Press CLOCK button to see present time after ON OFF TIMER was set The LCD display will show present time about 15 seconds and return to show ON OFF TIMER If user press CLOCK button during the 15 seconds display of present time the operation will be CLOCK setting and return to ON OFF TIMER e Incase of power failure OFF TIMER will be automatically cancelled as there is no electricity in the air conditioner however the set time on the remote control is st
Download Pdf Manuals
Related Search