Home

Culinaire Glass Washer Model: AT40ST

1. eese enne nennen nnne nnn nnn nnns 29 Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 1 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST General Recommendations ATTENTION Carefully read this instruction booklet as it contains important advice for safe installation operation and maintenance Keep this booklet on hand in a safe place for future reference by other operators or service technicians Qualified personnel specifically trained in the following instructions can perform installation and service of the machine WARNING The manufacturer cannot be held responsible for injuries or damages of any kind occurred to persons machine or others due to lack of conformity with the operation instructions indicated in this documentation and for abuse misuse and lack of conformity with the instructions indicated in this documentation as well as installation uninstall service tune up maintenance requiring the removal of the safety barriers not performed BY TRAINED AND AUTHORISED SPECIALISTS will result in the IMMEDIATE LOSS OF THE WARRANTY Loss of warranty will result from any service performed to the machine when o Safety barriers are removed without disconnecting the power line and the water supply When an
2. Take care when washing decorated or fragile dishes Starting Wash Cycles CONTROL PANEL H G F L A K R LEGEND A On Off H Regeneration Auto cleaning B Start Wash Cycle Wash Temperature Indicator C Short Wash Cycle L Rinse Temperature Indicator D Medium Wash Cycle Q Display E Long Wash Cycle K Automatic Wash Cycle F Final Cold Rinse Cycle R Continuous Wash Cycle G Drain Water Tank N B The control panel represented above is full version Some versions may not have all the indicated functions Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 15 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Starting the Machine Open the door and verify that all filters are in the correct position Open main water supply cock Switch on at the mains Close the door and press button A to turn ON the machine S Y a The machine will start to automatically fill with water During water filling process the control will display AER FILL o FILL If during this process the door is opened CLOSE DOOR is displayed Close the door During the filling and water heating process button B will be an AMBER colour After the water heating process is finished and the tem
3. INSTALLATION PLACE INSTALLATOR NAME MACHINE SERIAL NUMBER SIGNATURE Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 13 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Operation General Recommendations Our appliances have been designed to give high performance Hence the appliance must be used exclusively for the purpose for which it has been designed i e for washing of dishes with water and specific detergent Any other use is to be considered improper WARNING Before any cleaning or maintenance operation disconnect the dishwasher by switching off the electricity at the mains or pulling the plug out Do not leave the dishwasher switched on unnecessarily If any fault is detected disconnect the dishwasher from the mains close the main water supply and call the service agent Do not use the dishwasher in an explosive atmosphere Do not wash or clean the machine with a hose or harmful materials Avoid exposure to direct heat and or humidity sources Do not use the machine if the supply cable is damaged The manufacturer declines any liability for damages to persons and or things due and to an improper wrong and or unreasonable use of the machine Never close the water cock while the machine is working Use only
4. Probe Error E 02 Tank temperature probe not connected or faulty Verify that the probe is correctly and well connected to the electronic board Verify that the probe is correctly positioned inside the tank and there is not presence of limestone on it Water Fill Error FILL E 03 Water fill not completed during the available maximum time 10min N B If water fill timing expires or in case of water level signal is not detected solenoid valve is automatically interrupted To restart solenoid valve press any button on the control panel Verify that water supply is correctly connected opened and free of obstructions Verify that solenoid valve filter is free of possible obstructions and deposits Verify that water supply pressure is adequate Verify that machine s door is completely closed and the overflow device is correctly positioned inside the tank Booster Temperature Limit Error Booster temperature maximum set point reached set point 14 C 57 F Substitute The Electronic Board Tank Temperature Limit Error Tank temperature maximum set point reached set point 7 C 44 F Substitute The Electronic Board Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse
5. Q 3 CQ E OOO LDI og S goad Deo o E a E 3 Jgeg t B gt E in A a i313 DES SONS seu Dia 5 SZ 050 METIA E i E INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Hydraulic Diagram r z TAV No 426 AT 40 STODDART 60081 N aoe 1285 5007 1215 e ul 60565 E Jm 5030 d LA L i e 6007 S560076 X Se Se Qs g i n Cy voro 60081 49079 60081 va 60060 30083 60071 12170 Son 12174 11851 gt NE 60565 soe 8c 12 2009 m nex he AR di NN Pa N i e o 60109 Sut TT 12010 601004 i goo JS ERE 60060 PG S i 4760081 TB es 60109 dia Ly ra KE n amp Eu aa 1510 2 e 51201 60081 biens ss 40103 60556 10349 m uut ON Son es 2 60103 20008 Q 9 10273 i 28 60565 Aj 16028 y 60003 Ja 5 PN pa 20006 11998 60103 e ond ps 3B A x EL 60081 960212 A AS 60050 d 11426 10528 60565 60202 e Z qa d A vae GF 5547 e 11998 j 15036 E 0430 60076 11404 I hl 60082 ae 12055 _ F7 sosa 99 11409 Ae 60074 8 7 pe LL Equis Y He ZF 6025 Sf SS AY eng A E 16023 C4 A A TS ta ce s Me a A AZ e j o ad Em e V 60083 ED Sy A 60565 SL 60232 600802 7 p L 760082 b y FR 40283 0401_y 4003 NO 44 Z Fa Pu DN O 2d 15595 f is d 16003 60565 Y E etos e Di 18 344 O MM Mee oe c E es We 60004 az o 385 g
6. 1954 Web www stoddart com au Email fse stoddart com au age 11 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Locate the rinse aid pump Rinse Aid Pump Adjustment Screw Reduce the amount of rinse aid by screwing the needle valve anticlockwise Increase the amount of rinse aid by screwing the needle valve clockwise Suggestion To check the effectivness of the rinse aid look at a freshly washed glass against a well illuminated background If there are drops of water remaining on the glass then the rinse aid should be increased If there are streaks on the glass decrease the amount of rinse aid Note If changing to a different detergent or rinse aid type even one by the same manufacturer you must rinse the suction and pressure hoses with fresh water before connecting the new detergent or rinse aid container Otherwise the mixing of different types of detergent or rinse aid will cause cristallisation which may result in a breakdown of the dosing pump Failure to observe this condition will invalidate the guarantee and product liability Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 12 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST INSTALLER REMARKS INSTALLATION DATE
7. appliance will not remove burnt food deposits from dishes Dishes with burnt on food deposits should be cleaned mechanically chemically for example pre wash under running water before putting them in the dishwasher The use of foaming and not specific detergents or in any case detergents used in different ways from that prescribed by the manufacturer or failure to remove the residuals of detergent possibly used for manual prewash can cause malfunctioning of the dishwasher and compromise washing results Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 19 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Daily Cleaning and Shutdown In order to have excellent washing results it is recommended to change the water in the machine at least twice a day and properly clean all the filters inside the tank WARNING Only remove the wash tank filters when all the water has drained from the machine Failure to follow this instruction leads to the possibility of solid matter entering the pump and causing major damage This may void the warranty Draining the Water from the Machine Turn OFF the machine by pressing button A On Off Open the door and remove the stand pipe by gently pulling up Stand Pipe Hold butto
8. stoddart com au age 23 O INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Message Error Fault Check Drain Anomaly Drainage not completed on Verify that the overflow device is the maximum programmed completely removed and no timing obstructions are present on the water drain line Verify that drain wires are correctly connected to the electronic board Booster Heating Maximum booster heating Verify that heater element wires are time reached 15min correctly connected to the electronic board Verify that heater element works correctly and there is not presence of limestone on it Tank Heating Maximum tank heating Verify that heater element wires are time reached 30min correctly connected to the electronic board Verify that heater element works correctly and there is not presence of limestone on it Parameters Error Memory parameters error Substitute The Electronic Board Or Damaged Board or damaged board Machine Events following a Warning Error Booster and tank heating elements are interrupted All loads are stopped the electronic board displays the warning code The control panel is inactivated All control panel leds are Off Cycle is interrupted in a hold mode until the breakdown is restarted The power to the appliance is controlled by the power button Safety Thermostat All machi
9. tank and rinse thoroughly before new wash cycles If foaming detergent has been used drain and refill the tank with water until the foam disappears Smears Or Spots On The Glasses Ask the service agent to verify the instruction for the rinse aid dosing In EMERGENCY In case of fire a powder extinguisher must be used In case of danger turn off the power immediately Maintenance Schedule Daily Monthly Yearly Empty the wash tank Descale the rinse and wash jets Descale the boiler the every month using vinegar or a i 3 internal surface of the tank Remove and clean the filters descaling agent and the appliance water Wipe the front of the machine Piping onee gr Ice A Year The internal hose of the Check detergent and rinse aid levels rinse aid and detergent peristaltic dispenser should undergo periodic maintenance once or twice a year Clean solenoid valve filter by extracting it from the inside of the valve and by unplugging the water inlet tube UNINSTALL Long period of inactivity Only qualified technicians can take the machine out of operation Shut water line off water valve and electric supply main breaker Completely drain the tank Remove and carefully clean the filters Completely drain the incorporated dispenser hoses removing them from the containers Drain the detergent and rinse aid nozzles with fresh water first and after with water and glycerine
10. 50 5096 taking care that nozzles remain clean and lubrified inside Drain the booster completely by removing the screw located under the machine Spread a thin film of vaseline oil over all the stainless steel surfaces Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 26 O Pa E 8 AE D lt ie a y 0 5 E A E e NDISS3NNUJ 3AU YT3H 37 NOD LLNSNOdIHCO INNITY DNNVYYSHINVA DITS nid 1LWA18130 5 ge Y ITISOOW NS YSSFIAWOI Nid 3NOISH3A YNS VTISN YNHIJYW v1 viNdS3sddvd VH3H2S 01 NVOdOIS 07 LV gt Nr ll 1 2 Ko 3 hel L ES SIOWINOJ 5 ADLIVINOJ DIAC JWAAHL OJWAJL 390 LVL 380LIVINDO LIVANDI WODI 0340103 STVNOLLdO ATNA S E Oo o 32330 3IHB3H1 DWH JHOLV IW WLT A8 07103538438 SI WYHOVIO WIWAL SHL s 303 S ADIOVINOI 31030 JIWE3HI OWL 3901Y INM 3HOLLVINOJ VNSOS WILTS 5 Ey 1v150553ud D1VISDSS 3tld Sd uw Z 7 H21IMS DXJW NODO WIMOd 390118831108 dbl 2 ie D A 3enivH3dW3l S H3108 3808d 431108 vaniva3dA3l 10 YONOS 81S 39NvMO INODNYEHY y Es pan JANLYHA
11. AWIL SANYI Jg0 d VJSVA vanlvH3dW3lL ID YONDS ALS 137014 Y0 2g E 1N3N314 ONLYSH 831108 Y71108 Y2N315 538 ge Av 19 OWN 5 E lt v INIWJTA ENLV3H ANY VISVA VZN3ISIS3H Ad A383 00189 A ES 3AWA OIDN3TDS 831108 43108 VIDAWADNLIJH 813 ILM DINVIE id 2 dWNd Nivel SOLD OJBVOS VdWOd 3HIOl0W SuW ama HO Deezzv aj dd YOLON HSYM OIOOVAY VdlDdOlOW TAW ama me 5 lt E 102 5AV RM 3138 VNIEOB ud nk Er lt ES S IOV INDJ SAV 38 318 MLV IND Y gt SD o a E O IMYA DION3IDS 3SN 07109 000394 ONO YOSIY VIOAWADYLIST 413 NMOHB 3NDHBV tn did Oly 35Nl amp BOLD 3LNv INVTIMS YdWOd DNIBOLO Bd Ep o ie dif d LN3983130 SOLDH 31N3983130 YdWOd DNBOION Od S i Z 43114 ISON Ove OVE 084 ISIOLLNY Dell TE o EN c 19 2 ES E MER Daza Y t Day t fz TE ET DENZZV SC Hanzy tam O N 9 zi gt 5 5 5 a E B 8 ja 8 8 E 8 B E amp n NM ME a c D Q m ME zm 7 3 a4 ug S E T DENS 8 E ie 5 WI z EM DH 3N YSUd a v 9 wey Bub Gu Lalo ae raa 3 LO gas Bee PEE E d alja SZ 3HO24VW F i ag z xo OF di M 2 Rey Pg WT TI 7 E m E bs e gt a LA is m 8 8 e 5 o PER WLI She H ams J 3 1 s 2 Wine ES ran co E a B g 3 s Ez e UH sg E ri 5 gt 5 y o OBHZIV Ad ais RET in E 3 a m 2 E gt E d E o 2 E aE z E Q o Bd Ad esta OHH Wa s dW oss o 1 E meg O6 O J gn V Tw yn P E 2 E dW oo o o a a ENR N E u 5 3 2 zd a Si N Sd E an B dh A a 3 3 S gt jg 3 j i zm w y la cat fan ES WLI amp o E
12. INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Culinaire Glass Washer Model AT40ST Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Table of Contents Table of Contents essa 1 General Recommendations ccccccseeeessseeeseseeesceneeecaseeecaeeeesceneessaeeessaseessoees 2 A 3 Ehre rta ios 3 Disposal sra 3 uei iina aiet aeaa an daai cs ceca sete as ten ene 3 Morrseaonib srom EE 4 Water COMMECHOMN ais esee ee eee eoe e peris iaa 5 Electrical CODnectloli cortina Ee Rh daa ar 5 Operating ENVIFONMENE ai cid 5 Noise Level harta 5 Rating Plat a ais 6 Installation caos aagana aiaa aaraa aa aa ai aaia aaa aiaia 7 Water Supply Connections ccccccccconococonnnncnonoonorarennnnnnononon na nnne nnnm nn nnne nnn nnne nnne nennen n nnn nnn 7 AA A URS 8 Electrical Connection iere corteo iii 8 Detergent Installation and Adjustment sssssssseemenenenenenenennnenennnnnnnen nnns 9 Rinse Aid Installation and Adjustment occccccccnnnnnnnnnnnnnnnnenenenenononenenonenenenonenenenenenenenineniness 11 CDS AU OM POPMA TOR ali 14 General Recommendations eese nono enne nnne nennen ennt e
13. a CO N ET 60083 60082 60162 1 amp a V 60221 60081 EN 8 n j p 242 PRIME e c AEG G4 80555 Email fse stoddart com au Due to continuous product research and development the information contained herein is subject to change without notice Tel Revision Date 16 02 2012 Page 28 of 3 1300 79 1954 Web www stoddart com au INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Warranty Appendix 1 Australian Warranty and Contact Details As the exclusive manufacturer and distributor of Culinaire products in Australia Stoddart Manufacturing Stoddart would like to congratulate you on your purchase of a Culinaire product It should be noted by users of the product that it is not designed for household or domestic use and should not be used for this purpose This product is intended for commercial use and in line with Australian electrical safety standards the following warnings are provided This product is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety Children should be supervised to ensure that they do not play with the product Users should also note that if the supply electricity cord is damaged in any way it should be replaced Please contact Stoddart for parts
14. and we will advise how to do this in order to avoid any electrical hazard Australian Warranty Policy amp Procedure Stoddart is committed to providing a comprehensive and fair warranty for all of its equipment The warranty incorporates a commercial manufacturers warranty together with the consumer warranty provisions of the National Consumer Protection Act 2009 1 0 Commercial Warranty 1 1 Stoddart warrants to the original purchaser Customer of equipment manufactured or distributed by Stoddart that for 12 months from the date of installation of the equipment by Customer the Warranty Period any defect in workmanship or material will subject to clauses 1 2 and 3 be a Repaired without charge or b In respect of any Major Failure which cannot be repaired replaced or the purchase money refunded 1 2 Stoddart will not be liable for any associated loss damage or compensation claim resulting from any defect in workmanship or material and such liability is expressly excluded from the operation of clause 1 1 2 0 Consumer Warranty 2 1 Subject to clause 3 equipment supplied by Stoddart to Customer for personal domestic or household use or consumption comes with guarantees that cannot be excluded under the Australian Consumer Law Customer is entitled to a replacement or refund for a Major Failure and compensation for any other reasonably foreseeable loss or damage Customer is entitled to have the equipment repaired or replac
15. arrange a warranty call out until it receives the above information from you in writing f Upon receipt of a properly completed Stoddart Warranty Request Form Stoddart will check its records to confirm whether the equipment is eligible for warranty repair If warranty repair is required Stoddart will issue an OFFICIAL AUTHORISATION NUMBER and details of work to be carried out by a Stoddart authorised service agent This authorisation number MUST be obtained before any work is carried out Stoddart will not accept invoices for work carried out without an official authorisation number or by an unauthorised service agent g Customer must quote the official authorisation number on all correspondence and invoices relating to a warranty claim to ensure prompt processing by Stoddart h Customer must pay all costs associated with a call out for work that is not related to warranty repairs or outside Stoddart s Terms immediately 5 0 Timing of Warranty Services 5 1 Stoddart will comply with its warranty liabilities contained in these Terms in a timely manner 6 0 General Maintenance and Repairs 6 1 The equipment must be repaired and maintained by a qualified technician Stoddart s authorised service agents are experienced technicians who understand the equipment and carry commonly used spare parts Contact Stoddart s national service number listed below for details of your nearest Stoddart authorised service agent For Warranty maintenance spare p
16. arts and repairs contact Tel 1300 307 289 email service stoddart com au Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Page 31 of 33
17. clockwise WARNING For optimal washing results as well as to extend the life of the machine ensure correct detergent and dosage is used Always follow the instructions of the manufacturer for correct cleaning agents Improper dosages result in unsatisfactory washing results and excess pollution Do not use corrosive or pollutant products to protect and maintain the machine and never exceed dosages indicated by detergent manufacturer Never leave the dispenser dry or charged with corrosive or foreign products as it will result in loss of warranty Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 10 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Rinse Aid Installation and Adjustment Locate the correct hose tube on the rear of the machine Rinse Aid Hose Blue Place the correct hose tube into the rinse aid bottle Open the front panel with Allen tool or similar by inserting it inside the holes on the under side of the panel Pull up the panel carefully Before removing the front panel make sure the machine is disconnected from the main breaker PULL Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79
18. e the protective film from the appliance A Disposal This appliance is marked according to the European directive 2002 96 EC on Waste Electrical and Electronic Equipment WEEE By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The symbol left on the product or on the documents accompanying the product indicates that this appliance may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment Disposal must be carried out in accordance with local environmental regulations for waste disposal For more detailed information about treatment recovery and recycling of this product please contact your local city office or your household waste disposal service Technical Data Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 3 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST WARNING This machine must be installed in accordance with AS NZS 3500 1 This machine must be operated on potable water If the water has a high mineral content pretreatment will be necessary or wa
19. ed if the equipment fails to be of an Acceptable Quality and that failure does not amount to a Major Failure 3 0 Warranty Clarification 3 1 Customer acknowledges and agrees I A Major Failure occurs when the equipment suffers repeated and or unexpected failure that cannot be repaired to Stoddart s satisfaction acting reasonably or which Stoddart considers acting reasonably renders the equipment unsafe or inoperable II Stoddart can only warrant the equipment will be of an Acceptable Quality when Customer uses the equipment in accordance with Stoddart s manufacturer s instructions or user manual Instructions Acceptable Quality does not imply a lifetime guarantee for the equipment Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Page 29 of 33 INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST III Certain components have a finite expected life especially in a commercial or high use environment For example components such as refrigeration compressors elements thermostats simmerstats switches fans and temperature controllers can be expected to last up to 12 months when used in accordance with the instructions IV In a commercial environment components such as lamps fluorescent tubes light bulbs glass silicone seals gaskets and plastic c
20. location Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au Page 30 of 33 INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST 4 0 Warranty Claim Procedure a The following procedure must be followed to claim under Stoddart s warranties b Refer to the trouble shooting section of the Instructions to establish the nature of the fault Check the equipment is plugged in turned on or has no other valid reason for not operating C If step a does not overcome the issue you should report the fault with the equipment to our service department phone 1300 307 289 _ Our service department will assist you with further trouble shooting If our service department is unable to resolve the fault with the equipment they will request you complete a Stoddart Warranty Request Form and email Service stoddart com au it to us d To complete a Stoddart Warranty Request Form you will require the following information i Proof of purchase stating model number and date of purchase ii The serial number of the equipment this is located on the ratings plate sticker iii A description of the fault problem iv Your company details including the exact location of the equipment and v Any restrictions on times or methods of access to the equipment e Stoddart will not
21. misuse neglect unauthorised alteration incorrect installation power surges accident use of inappropriatechemicals flooding fire or act of God C Any consequential loss damage or expense arising directly or indirectly from use of the equipment otherwise than in accordance with the Instructions d Any damage or malfunction arising from or relating to Customer s failure to properly maintain or clean the equipment in accordance with the Instructions e Damage caused to equipment during transportation which is outside Stoddart s standard delivery conditions f Breakage or replacement of lamps fluorescent tubes light bulbs glass silicone seals gaskets and plastic components g Maintenance repair or other works not undertaken by a Stoddart authorised service agent h Where remote refrigeration is connected by a person other than Stoddart to equipment produced by Stoddart Stoddart cannot accept claims for repair of TX valves and control components as the fault may arise from the installation of the remote refrigeration lines equipment and gas by a party over which Stoddart has no control i Transportation costs associated with transporting the equipment to a Stoddart authorized service agent where Stoddart considers acting reasonably that repairs cannot be undertaken on site and j Unless agreed to by Stoddart in writing to the contrary warranty is not included in the sale price for goods sold to or installed in an overseas
22. n G drain water until it starts drain process Qu 4 N SS M o e Wait until all the water is completely drained out from the tank The machine will turn OFF automatically after completing drain process Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 20 of INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Cleaning the Filters Drain Pump Filter Wash Pump Filter e Turn OFF the machine by pressing button A On Off e Manually remove the drain pump filter in the rear of the washing chamber by unscrewing the plastic retainer knob e Manually remove the wash pump filter in the front right hand position of the washing chamber by unscrewing the plastic retainer knob e Wash and clean the filters under a tap with fresh water e Carefully replace all filters inside the machine Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 21 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Cleaning the External Surfaces e Turn off the power at the mains e Wipe the external surfaces of the machine with a damp soft cloth
23. nes are provided with a safety thermostat that shuts the machine off in the event of overheating 120 C 248 F To reset the safety thermostat press the push button located behind the control panel Before opening control panel power MUST be disconnected from the machine Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 24 o INSTALLATION OPERATION amp Trouble Shooting Culinaire Glass Washer Model AT40ST The Dishwasher Does Not Work Verify inlet main water supply is correctly connected open and free from any obstructions Verify main electrical supply is working Verify the door is properly closed Dishwasher Does Not Wash Well Verify if the filters are cleaned in case not clean them Verify if the washing water jets on the washing arms are not obstructed by any solid residues Verify if used a correct amount and quality of detergent and rinse aid Verify if the dishes are correctly loaded on the dishwasher Washing cycle used is too short Use another cycle if available or repeat the washing cycle The Dishes Are Not Rinsed Well Verify if the rinse water jets on the washing arms are not obstructed by any solid residues Verify solenoid valve filter is free from any obstructions such as lime or scale The inlet wate
24. nne nennen 14 Suggestions Before Using The Dishwasher eeeesesesesesesesese nennen 15 Starting Wash Cycles ati terere xn rh Rn ken na ER Co e EE REI EIE E Eu E D A EI aana o aedi 15 Starting the Machine cuencia ER Lear ava oo Do dran t aa E Len ea Eu Lee dea ae TEE da 16 Washing ETC 17 hermo StOP m Ee 17 Final Cold eil 18 Daily Cleaning and Shutdown occccccccnnnnnnnnnnnnnnnennnnnnnenonenennnnnnnnnrnnnnnnnnrnnnnnnnnnnrnnnnrerenenenenenes 20 Draining the Water from the Machine ssesseeeenmnennennnnnnnnnes 20 Cleaning the Eilt rs cronica eere nente oi ea ee Ee Rhe Aer Er uen Eee eins 21 Cleaning the External SUrfacesS ocooocccconononnnnnononononononononnnnnno nono no nn nn nn nn nn nne nnne 22 Turning off the Machine Shutdown essen 22 Maintenance ER TIT od 23 Control Panel Warning Messages ccccccocononononcnononononnnnnonnnonn cnn nono nono aaa 23 Troubleshooting ur A a es 23 Machine Events following a Warning Error cocccccccccnnoninineninenenenononenonenenenonenenenenones 24 Safety Thermal ias 24 Maintenance A NO 26 Electrical DIA AM rr AAA ii 27 Hydraulic Diagram cima nua aaan ar SERRE URS ERKRKERE DRE iaa a danai BARRE 28 Warranty An PP a a aaa i arinei 29 Appendix 1 Australian Warranty and Contact Details occcccccnnonconcccnnnnnnonnnaronnnnnnonononnarnnnns 29 Australian Warranty Policy amp Procedure
25. omponents will require regular replacement This is not covered by warranty and is at Customer s cost V The life of equipment may be adversely affected by misuse neglect unauthorised alteration incorrect installation power surges accident use of inappropriate chemicals flooding and acts of God VI Proper maintenance and cleaning of equipment in accordance with the Instructions is essential to the equipment s effective operation VII On site warranty services are limited to sites within 50km from the nearest Stoddart authorized service agent and service agent s reasonable travel costs must be paid by Customer prior to the commencement of the repairs Public Holidays VIII Stoddart cannot guarantee the performance of equipment made specifically to Customer s design or specifications Stoddart will where reasonably possible draw any issues arising from Customer s design or specifications to Customer s attention during the commissioning and or manufacturing process and IX Customer must pay additional costs incurred by Stoddart as a result of Customer failing to provide suitable access to the equipment for inspection and service 3 2 Stoddart s warranty liability under clauses 1 and 2 of these Terms exclude or do not cover a The matters acknowledged by Customer in clause 3 1 b Situations where Stoddart is not satisfied acting reasonably the equipment or any part of the equipment has been used in accordance with the Instructions including
26. ons The temperature is calibrated to the requirement of the local authorities Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 17 O INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST In the event that the rinse water temperature is below the required temperature the machine will continue to wash until the rinse water temperature reaches the correct level During thermo stop washing cycle the control panel will display SAFE until final rinse temperature is reached and the cycle is finished w SAFE Final Cold Rinse The machine is capable of a short final cold rinse If the cold water hose has been connected during installation To active the final cold rinse Press button F short cold final rinse before or during the washing cycle Correct Loading of Glass Racks Load glasses upside down in the supplied basket Lo Slide the basket in to the machine Carefully close the front door of the machine Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 18 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST WARNING The
27. perature is reached the button B will be a GREEN colour The machine is now READY to use Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 16 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Washing Cycle The wash cycle includes one wash with hot water and detergent at 60 C 140 F and one rinse cycle with hot water and rinse aid at 85 C 185 F To start a wash cycle follow the steps below e Open the door e Insert dirty loaded dishes basket e Close the door e Choose one of the available wash cycles Button C Short Cycle Button D Medium Cycle CRN Button E Long Cycle NEEN e Press button B to start the washing cycle ny M p AN ERE Lu e During washing cycle button B will blink GREEN and the time remaining is displayed e Wait until is the control displays END The wash cycle is now finished open the door and remove the clean dishes basket 5 END If during wash cycle the door is opened the washing cycle is stopped and CLOSE DOOR is displayed on the control panel Thermo Stop The machine is configured with THERMO STOP enabled This function ensures the rinse water temperature is maintained at the correct temperature to ensure the correct final sanitization rinsing conditi
28. placed by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard Power cable cannot be stretched kinked pressed during normal operation service or anytime Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 8 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Detergent Installation and Adjustment Locate the correct hose tube on the rear of the machine Detergent Hose Clear Place the correct hose tube into the detergent bottle Open the front panel with Allen tool or similar by inserting it inside the holes on the under side of the panel Pull up the panel carefully Before removing the front panel make sure the machine is disconnected from the main breaker PULL j Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 9 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Locate the peristaltic detergent pump Detergent Pump Adjustment Screw Reduce the amount of detergent by screwing the needle valve anticlockwise Increase the amount of detergent by screwing the needle valve
29. professional detergents and rinse aid and store them ina cool and dry place out of the reach of children The machine is equipped with safety micro switch to stop the operation in case the door would be opened during the wash process The pump motor is equipped with a terminal probe 160 C 320 F to avoid overheating To avoid vibration the machine is equipped with adjustable feet This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 140 INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Suggestions Before Using The Dishwasher Do not allow food to dry on the dishes before washing Remove large food scraps from the dishes to prevent clogging the filters Pre wash the dishes by spraying them with cold or lukewarm water without using any detergent To have best washing results place all cutlery in the cutlery basket with the handles downwards paying attention to avoid potential injuries Do not allow silverware to come in contact with other metals
30. r pressure is inferior of 2 bar 200 KPA Install an external pressure device to ensure and increase the inlet water pressure inside the machine The Dishes Are Not Dried Well Ask the service agent to verify the instruction for the rinse aid dosing Verify if the rinse aid container is empty If yes fill it with rinse aid product Verify the quality and the quantity of the rinse aid used and check with the service agent Verify the rinsing temperature is between 80 C 176 F to 90 C 194 F degrees Condensation On Glasses Verify if the rinse aid container is empty If yes fill it with rinse aid product Verify the quality and the quantity of the rinse aid used and check with the service agent Download the glasses rack immediately after the end of each cycle Stains On Glasses Use only non foaming products for professional dishwashers Excessive Foam In The Tank Verify washing water temperature is not less than 50 C 122 F degrees Ask the service agent to verify the instruction for the rinse aid dosing Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 25 O INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Ensure the tank has not been cleaned with unsuitable cleaners Drain the
31. rinsed in warm soapy water e Care should be taken to avoid wetting the electronic controller WARNING Clean stainless steel surfaces by using warm soapy water never use detergent containing abrasive substances nor steel scrapers common wire wool brushes or scrapes rinse thoroughly using a wet cloth and carefully wipe dry Do not wash the appliance by using direct or high pressure water jets Turning off the Machine Shutdown Drain all water from the tank Turn OFF the machine by pressing button A On Off Remove and clean the tank filters Close the door and turn off the power at the mains Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 22 0 INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Maintenance Control Panel Warning Messages WARNING Messages will be only be displayed with the machine turned on Trouble shooting Message Error Fault Check Booster Temperature ntcb Probe Error E 01 CA Booster temperature probe not connected or faulty Verify that the probe is correctly and well connected to the electronic board Verify that the probe is correctly positioned inside the booster and there is not presence of limestone on it Tank Temperature ntcu
32. rranty may be voided Connection Diagram 510 550 z Y 1 al r 4 i a LL Lo 1 Electrical connection 2 Hot water connection 3 Cold water connection 4 Drain Model A B C D E F AT40ST 190 230 295 38 85 38 Due to continuous product research and development the information contained herein is subject to change without notice Email fse stoddart com au Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au age 4 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST WARNING The following data must be complied with otherwise poor washing results will occur and warranty may be voided Water Connection Temperature oC 50 oF 122 Pressure KPA 200 500 Bar 2 5 PSI 29 72 Flow Lt min 20 30 Hardness oF 7 14 oDH 4 7 5 OF 5 9 5 Ppm 70 140 Mineral Mg l 300 400 residues Conductivity uS cm 300 400 Electrical Connection Voltage V 6 Frequency Hz t 1 Wash Cycle oC 55 Rinse Cycle oC 85 Operating Environment Operating oC 5 35 Temperature oF 41 95 Storage oC 10 70 Temperature oF 50 158 Noise Level The noise of the machine measured at the manufacturer site is less than 70dB Due to continuous product research and development
33. the customer is given the manual e Position the dishwasher and level the appliance by turning the relative height adjustable ES ATTENTION Water Hardness If the water hardness is higher than specified in the technical data section a water softener of adequate size must be installed before the inlet solenoid valve If not installed wash results will be poor If not installed warrantv could be voided Water Supply Connections e Connect one flexible hose supplied to the cold water valve connection e Connect the other flexible hose supplied to the hot water valve connection Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 7 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Drain Connections e Connect the drain hose supplied to a suitable drainage point Typically this will be the dishwasher connection spigot on a P or S Trap Electrical Connection WARNING This machine must be installed in accordance with AS NZS 60335 1 The electrical supply shall comply with the rating plate data 15amp The machine is supplied with a plug and lead The machine must be plugged directly into the power outlet The use of extension leads or power boards are not to be used If the supply cord is damaged it MUST be re
34. the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au age 5 o Email fse stoddart com au INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Rating Plate The rating plate of the appliance contains identification and technical data and is located as per diagrams below To access the lower front panel extract the front panel with an Allen key tool or similar by inserting it inside the holes on the under side of the panel Pull the panel up carefully Imported and Distributed by Tom Stoddart Pty Ltd ABN 16 005 690 251 Uu naire Phone 617 3345 5011 service Getoddart com au ww stoddart com au Serial No 123456789 Model No AT40ST Description Culinaire U C Glass Washer Date of Manufacture 5 11 2010 Voltage 220v 240v 50 Hz N Rated Current 14 5Amps Hon Protection IPX1 WaterMark Ld ATS5200 101 Lic 9cxxx Sample Only Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 6 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Installation ATTENTION Ensure that a trained person installs this machine Ensure the customer is trained on how to use the machine Ensure
35. y safety provision of the machine has been bypassed removed or excluded o Machine is installed in provisional improper or unsafe conditions for lack of compliance with safety provisions fuses main breaker ground line or water inlet and discharge valves When unauthorised modifications or unauthorised additions of devices are made which modify the operation cycles indicated on the data chart delivered with the machine When non genuine spare parts are used Installation or storage in inadequate spaces according to the indications of manufacturer Machine utilization different from the scope foreseen as written in the documentation ex Dishes of type or sizes different from specified Utilization of dispensers with corrosive products Due to continuous product research and development the information contained herein is subject to change without notice Revision Date 16 02 2012 Tel 1300 79 1954 Web www stoddart com au Email fse stoddart com au age 2 o INSTALLATION OPERATION amp Culinaire Glass Washer Model AT40ST Handling Use suitable means to move the appliance eg A lift truck or fork pallet trucks the forks should reach more than halfway beneath the appliance Unpacking Check the machine for damage before and after unpacking If machine is damaged contact the dealer Wear protective gloves to unpack the appliance from the boxing E Lift the appliance using a lift truck mE Remov

Culinaire Glass Washer Model: AT40ST

Contents

Download Pdf Manuals

Related Search

Related Contents