Diamond Tech, USA
Contents
1. if not handled properly Keep torch and beads away from children 3 Return the Power Box lid and secure in place and animals while working in the flame and cooling with screws Fig 2 Do not expose the Electric Mandrel Spinner to wet conditions Water entering a power tool will increase the risk of electric shock and damage e Never use the cord for carrying pulling or unplugging the power tool Keep cord away from heat oil sharp edges or B Choosing the correct Mandrel size moving parts Damaged or entangled cords increase the risk of electric shock The EMS may contain any combination of the following e Do not use the Electric Mandrel Spinner while you are tired or under the influence of drugs alcohol or medication mandrel sleeves and one stationary axle Choose the e Disconnect the battery pack from the EMS before making any adjustments changing accessories or storing tools appropriate mandrel size for your project When tool is not in use for long periods of time remove batteries Be sure the power switch is in the OFF position before plugging in the EMS e When not in use turn the switches and knob in the off position to save battery life CONTENTS Your EMS has been shipped partially assembled Carefully remove the EMS and parts from their packaging ORIGINAL ORIGINAL PETITE e Electric Mandrel Spinner e Petitie EMS e Power Box e Power Box e 3 32 Mandrel Sleeve e 3 32 Mandrel Sleeve e 1 8 Mandrel Sleeve e 1 8 Mand2. 801000 801005 801010 801015 801025 iBearfoot ols Diamond Tech by Studio Pro VAL Electric Mandrel Spinner 1 Year Warranty All Bearfoot Tools by Studio Pro are manufactured to high quality standards and are serviced by highly qualified technicians Electric Mandrel Spinner EMS is warranted to the original purchaser for one full year from the original purchase date During the 12 month period if you feel the Electric Mandrel Spinner EMS is not performing properly and needs to be serviced contact Diamond Tech at 800 937 9593 or email info dticrafts com for a Return Authorization Number Equipment will not be accepted at Diamond Tech without a Return Authorization Number If returning your Electric Mandrel Spinner EMS for evaluation or repair be sure to include your Name Address Daytime Phone Number with Area Code and a letter explaining the specific problem you are encountering You will be contacted if any necessary parts or service are not covered under the warranty Date ofpurchase_ _ Mark the Return Authorization Number clearly on every package Do not send this product back without such prior authorization Return postage and insurance are the responsibility of the consumer Diamond Tech will return your Electric Mandrel Spinner EMS postage paid and insured if it is under warranty Any Electric Mandrel Spinner EMS no longer under warranty will be returned at the owner s expense Diamond Tech reserves the right
3. U BEGIN ASSEMBLY INSTRUCTIONS Your Electric Mandrel Spinner EMS will arrive packed as three pieces Power Box Electric Mandrel Spinner and A WARNING This product contains small parts that may be a choking hazard to small children a set of Mandrel Holders KEEP OUT OF REACH OF CHILDREN A Install two D batteries into the Power Box READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY 1 Make sure switches and rheostat are in the OFF e When working with glass protect your feet and legs by wearing non synthetic pants and closed top shoes Never wear position switches should be centered and the loose fitting clothes neckties jewelry and gloves that may get caught in the Electric Mandrel Spinner EMS moving parts rheostat dial should be in the OFF position e Eye protection is essential Cold glass when heated too quickly may fragment Always wear eye protective gear to Remove the four screws from the bottom of the shield yourself from possible hazardous glass projectiles Power Box using a Phillips head screwdriver and e Make sure your work area is well ventilated free from combustible material and equipped with a handy fire remove cover extinguisher for emergency purposes 2 Insert batteries following the direction indicated on e Glass and flame can reach temperatures of 1400 F 1600 F which is extremely hot Temperatures this high can the cell negative should face the spring Fig 1 cause serious bodily harm and property damage
4. UAL PAGE 4 3 If mandrel does not fit snugly adjust the mandrel sleeve To do so remove the mandrel and compress the sides of the mandrel sleeve with pliers alternating around the circumference of the sleeve until you have a tight fit OPERATIONS AND USE UBearfoot cools by Studio Pro A Connecting the EMS with the Power Box To connect the Electric Mandrel Spinner EMS to the Power Box simply insert plug and press firmly Failure to properly connect may result in opposing operations Fig 4 ES B Electric Mandel Spinner EMS Operation The EMS is equipped with a clutch located adjacent to the main body opposite motor The clutch allows the user to temporaily stop the mandrel from spinning 1 To operate the EMS both switches must be engaged on the Power Box 2 To manually slow down the speed of the mandrel apply light pressure to the clutch and release to resume standard motion Use this motion to slowly apply detail to the bead 3 To temporarily stop the motion of the mandrel apply firm pressure on the clutch release to resume BOTH SWITCHES MUST BE ENGAGED RHEOSTAT TO OPERATE C Power Box Operation 1 To operate the EMS both switches must be engaged 2 The switch closest to the rheostat controls the direction of the axle and the spin Position the switch to the right and the mandrel will spin forward Position the switch to the left and the mandrel will spin backward 3 The switch furthest from the rh
5. eostat knob controls the speed of the mandrel Position the switch to the right and the mandrel will spin at a slow speed Clutch Position the switch left and the mandrel will spin at a faster speed EMS Body 4 The rheostat knob allows additional speed control To increase your speed whether set on slow or fast speed turn the knob clockwise To decrease your speed turn the knob counter clockwise Gears Opening allows user to push through unwanted mandrels pS Mandrel Sleeves QUICK TIPS Only feed molten glass onto the spinning mandrel the EMS spins at a much higher rate than normal spinning the hotter temperature allows for better gravitational pull and easier release from the glass rod PARTS AND ACCESSORIES Axel pS Power Box Plug Oo PART SK 1 8 MANDREL SLEEVES FOR EMS EACH ADAPTOR SLEEVES 5 64 EACH SMALL REPLACEMENT CLUTCH FITS ORIGINAL amp PETITE EMS 802160
6. rel Sleeve e 5 32 Mandrel Sleeve e 5 32 Mandrel Sleeve Mandrel Adaptors of 5 64 and 3 16 mandrel are sold separately 3 16 Adaptor fits the Original and MIDSIZE of EHTE MIDSIZE Petite EMS and 5 64 fits all EMS sizes e Midsize EMS e Petite Midsize EMS e Power Box e Power Box e 3 32 Mandrel Sleeve e 3 32 Mandrel Sleeve C Installing and Using Mandrel Sleeves _ e 1 8 Mandrel Sleeve e 1 8 Mandrel Sleeve 1 To use the smallest mandrel size 1 16 leave all mandrel sleeves included with the EMS inside the e 5 32 Mandrel Sleeve e 5 32 Mandrel Sleeve axle and insert the mandrel into the sleeve e 3 16 Mandrel Sleeve e 3 16 Mandrel Sleeve 7 32 Mandrel Sleeve e 7 32 Mandrel Sleeve 2 To use a 5 32 mandrel remove all mandrel sleeves by inserting the mandrel into the axel and pushing excess sleeves through to the opposite end and remove Insert the 5 32 mandrel into the sleeve Fig 3 DELUXE Deluxe EMS Power Box 3 32 Mandrel Sleeve x 1 8 Mandrel Sleeve z Vode EWE ua OFF 5 32 Mandrel Sleeve N i Fow 3 16 Mandrel Sleeve A a 7 32 Mandrel Sleeve ob RHEOS Tar 1 4 Mandrel Sleeve 7s 1 32 Mandrel Sleeve 5 16 Mandrel Sleeve 11 32 Mandrel Sleeve Bear Bo OPERATE OTH a MUS SWITCHES BE ENGage GAGE ED Original Mandrel Spinner PAGE 3 ELECTRIC MANDREL SPINNER EMS OPERATIONS MANUAL ELECTRIC MANDREL SPINNER EMS OPERATIONS MAN
7. to repair or replace faulty equipment at our discretion The Electric Mandrel Spinner EMS is warranted against defective materials or workmanship If the Electric Mandrel Spinner EMS suffers damage due to customer modifications and or is used for any application other than that for which it was designed this warranty is void This warranty does not include damage due to A neglect B accident C unreasonable use D improper maintenance E any other causes not attributed to defects in material or workmanship Any implied or otherwise explicit guarantees made through merchandiser of this product are not covered in this warranty coverage agreement and are expressly disclaimed Kote JY Studio Pr IMPORTANT NOTE This tool was designed for certain applications only Diamond Tech strongly recommends that this tool NOT be modified and or used for any application other than that for which it was designed If you have any questions relative to its application please contact us and we will advise as to it proper use Diamond Tech USA Electric Mandrel Spinner 5600 Airport Blvd Suite C Tampa Florida 33634 Tech Support 800 937 9593 U S A Canada 813 806 2923 International O P F RATIO NS MAN UAL Fax 800 299 3313 E mail info dticrafts com www DiamondTechCrafts com www DiamondTechGlass com 12 2012 PAGE 1 ELECTRIC MANDREL SPINNER EMS OPERATIONS MANUAL ELECTRIC MANDREL SPINNER EMS OPERATIONS MANUAL PAGE 2 BEFORE YO
Download Pdf Manuals
Related Search