User`s manual (Canada version) DM222/DM222-2
Contents
1. then press select 3 Press volume or volume to choose ENGLISH FRANCAIS or ESPANOL 4 Press select to confirm your selection The screen displays SAVED and you hear a confirmation tone S9 NOTE e The language setting on each parent unit is independent Set default Use this feature to restore to the default settings Restoring the default settings on one parent unit will also reset the shared settings for sensitivity of the other parent unit 1 Press menu when the parent unit is not in use 2 Press volume or volume to choose SET DEFAULT then press select 3 Press volume or volume to choose YES or NO 4 When you choose YES press select to confirm your selection You hear a confirmation tone and then the screen displays LINKED OR When you choose NO press select to confirm your selection The screen displays the previous menu Projector and lullaby You can turn on the projector and lullaby on the baby unit The baby unit projects colorful images to the environment and plays the lullaby to comfort your baby When the projector is turned on displays on the parent unit screen The baby unit will play lullaby Press once to turn on the projector and play lullaby The interesting and colorful images is projected at the same time Press again to stop playing the lullaby The baby unit keeps projecting the colorful images Press for a third time to turn off the proje2. pitched noise Perhaps the baby unit is not connected to the mains Connect the baby unit to the mains The units may be too close to each other Make sure the parent unit and the baby unit are at least 1 meter 3 feet away from each other Why does the parent unit react too quickly to other sounds The baby unit also detects other sounds than those of your baby Adjust the sensitivity level to a lower level or adjust the speaker volume on the parent unit Why don t hear a sound Why can t hear my baby cry The volume of the parent unit may have set too low Press volume to increase the volume level You may have set a low sound sensitivity level See Adjust the sound sensitivity of the baby unit to change the setting Why does the parent unit beep If the parent unit is in mute and the sound alert feature is on there is sound detected from the baby unit The baby units may be out of range Move the parent unit closer to the baby units but not less than 3 feet If the parent unit is powered by the provided battery it may not have enough charge for the parent unit to perform normally Charge the battery in the parent unit for up to 11 hours Why can t establish a connection Why is the connection lost every now and then Why are there sound interruptions The baby units may be out of range Move the parent unit closer to the baby units but not less than 3 feet Other el
3. product from the wall outlet before cleaning Do not use liquid or aerosol cleaners Use a damp cloth for cleaning 11 Unplug the power cords before replacing batteries 12 Do not cut off the power adapters to replace them with other plugs as this causes a hazardous situation 13 Do not allow anything to rest on the power cords Do not install this product where the cords may be walked on or crimped Technical specifications Frequency Crystal controlled PLL synthesizer control Transmit Baby unit 1921 536 1928 448 MHz frequency Parent unit 1921 536 1928 448 MHz Channels LCD 35 x x 21 2 y mm B amp W LCD Nominal Maximum power allowed by FCC effective and IC Actual operating range may range vary according to environmental conditions at the time of use Power Parent unit 2 4 V Ni MH battery requirement Baby unit power adapter Input 100 120V AC 150mA 60Hz Output 6V DC 600mA Parent unit power adapter Input 100 120V AC 150mA 60Hz Output 6V DC 400mA 14 This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply in your home consult your dealer or local power company 15 Do not overload wall outlets or use an extension cord 16 Do not place this product on an unstable table shelf stand or other unstable surfaces 17 This product should not be placed in any area where proper ventilation is not provided Slots and openin
4. the Industry Canada technical specifications were met This product meets the applicable Industry Canada technical specifications RF radiation exposure statement The baby unit complies with FCC RF radiation exposure limits set forth for an uncontrolled environment The baby unit should be installed and operated with a minimum distance of 8 in 20 cm between the baby unit and all persons body Use of other accessories may not ensure compliance with FCC RF exposure guidelines This transmitter must not be co located or operating in conjunction with any other antenna or transmitter This equipment complies also with Industry Canada RSS 102 with respect to Canada s Health Code 6 for Exposure of Humans to RF Fields
5. 08608 020 100 Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation To ensure safety of users the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product This product has been tested and found to comply with the FCC criteria The baby unit shall be installed and used such that parts of all persons body are maintained at a distance of approximately 8 in 20 cm or more The transmitter and antenna of the parent unit shall be held at least 1 in 2 5 cm from your face This Class B digital apparatus complies with Canadian requirement CAN ICES 3 B NMB 3 B Industry Canada This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference including interference that may cause undesired operation The term IC before the certification registration number only signifies that
6. RC and 1 800 8 BATTERY are registered trademarks of Rechargeable Battery Recycling Corporation CYC Saar E Pn DNS 822 FCC and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission FCC rules These requirements are intended to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Specifications are subject to change without notice 2015 VTech Technologies Canada Ltd All rights reserved 04 15 DM222_CA_CIB_V2 0 Document order number 91 0
7. ain level You can use the parent unit to adjust the microphone sensitivity of your baby unit The higher the sensitivity level the more sensitive the baby unit is in detecting sounds for transmitting to the parent unit The sound sensitivity is preset to LEVEL 5 Sound sensitivity table for reference High High sensitivity level sensitivity The parent unit speaker is Level 5 3Level 4 constantly on and you will hear all sounds including background noises from your baby s room Medium high sensitivity level The parent unit speaker turns on for soft babbling and louder sounds from your baby It remains quiet when your baby sleeps soundly Medium sensitivity level The parent unit speaker turns on for loud babbling and louder sounds from your baby It remains quiet when your baby makes soft sounds Level 1 Medium low sensitivity level The parent unit speaker turns on for crying and louder sounds from your baby It remains quiet when your baby makes soft sounds Low sensitivity level The parent unit speaker turns on for loud crying or screeching sounds from your baby It remains quiet when your baby makes soft sounds Low sensitivity 1 Press menu when the parent unit is not in use 2 Press select 3 Press volume or volume to choose the sensitivity level 4 Press select to confirm your selection 2 Place the parent unit at least 1 meter 3 feet away from the baby unit e Yo
8. ake approximately 30 days How long is the limited warranty period The limited warranty period for the Product extends for ONE 1 YEAR from the date of purchase If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty this limited warranty also applies to the repaired or replacement Product for a period of either a 90 days from the date the repaired or replacement Product is shipped to you or b the time remaining on the original one year warranty whichever is longer What is not covered by this limited warranty This limited warranty does not cover 1 Product that has been subjected to misuse accident shipping or other physical damage improper installation abnormal operation or handling neglect inundation fire water or other liquid intrusion or 2 Product that has been damaged due to repair alteration or modification by anyone other than an authorized service representative of VTech or 3 Product to the extent that the problem experienced is caused by signal conditions network reliability or cable or antenna systems or 4 Product to the extent that the problem is caused by use with non VTech accessories or 5 Product whose warranty quality stickers product General product care To keep this product working well and looking good follow these guidelines e Avoid putting it near heating appliances and devices that generate electrical noise for example
9. any parent unit that is turned off out of range or talking to the baby unit Limited warranty What does this limited warranty cover The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase Consumer or you that the Product and all accessories provided in the sales package Product are free from defects in material and workmanship pursuant to the following terms and conditions when installed and used normally and in accordance with the Product operating instructions This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period Materially Defective Product During the limited warranty period VTech s authorized service representative will repair or replace at VTech s option without charge a Materially Defective Product If we repair the Product we may use new or refurbished replacement parts If we choose to replace the Product we may replace it with a new or refurbished Product of the same or similar design We will retain defective parts modules or equipment Repair or replacement of the Product at VTech s option is your exclusive remedy VTech will return the repaired or replacement Products to you in working condition You should expect the repair or replacement to t
10. arging time turn the parent unit off while charging e The standby time varies depending on the sensitivity level you set your actual use and the age of the battery Battery Battery indicators status Install the parent unit battery Charge without interruption at least 30 minutes The battery No battery is installed The parent unit can be used only when it is connected to AC power icon is off LOW BATTERY and C3 flash on the screen The a light flashes The battery Icon becomes solid Gam The battery has very little charge and may be used for only a short time Charge without interruption about 30 minutes The battery is fully charged To keep the battery charged connect it to AC power when not in use Using the baby monitor Power on or off the baby unit e Press power on to turn on the baby unit The power on lights up e Press and hold power on again to power off the baby unit The power on turns off Power on or off the parent unit e Press to power on the parent unit The screen turns on e Press and hold again to power off the parent unit The screen turns off e The parent unit powers on automatically once it is connected to AC power or battery installed The baby unit also powers on automatically once connected to AC power Adjust the speaker volume for baby unit e Press volume or volume on the baby unit at any time Adjust the
11. battery of the parent unit is empty and the parent unit is not connected to the mains Insert the appliance plug into the parent unit and put the adapter in a wall socket serial number plates or electronic serial numbers have been removed altered or rendered illegible or 6 Product purchased used serviced or shipped for repair from outside the United States of America or Canada or used for commercial or institutional purposes including but not limited to Products used for rental purposes or 7 Product returned without a valid proof of purchase see item 2 on the next page or 8 Charges for installation or set up adjustment of customer controls and installation or repair of systems outside the unit How do you get warranty service To obtain warranty service in the USA please visit our website at www vtechcanada com or call 1 800 267 7377 NOTE Before calling for service please review the user s manual a check of the Product s controls and features may save you a service call Except as provided by applicable law you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product s to the service location VTech will return repaired or replaced Product under this limited warranty Transportation delivery or handling charges are prepaid VTech assumes no risk for damage or loss of the Product in transit If
12. ctor The interesting and colorful images fade out S9 NOTES The projector and lullaby will automatically turn off after 15 minutes e Ifthe baby unit receives talkback from the parent unit during lullaby playback the lullaby will be paused It resumes after the talkback finishes Talk to the baby unit You can broadcast messages from a parent unit to the baby unit and the other parent unit If you have two parent units you can use both of them at the same time to talk to the baby unit e Press and hold talk on the side of the parent unit The screen displays TALK when the voice connection to the baby unit is made Speak towards the mic on the parent unit Your voice is broadcast to the baby unit and the other parent unit f9 NOTES If the speaker volume of the parent unit is set to VOLUME OFF it will be reset to the default VOLUME 3 when you press and hold TALK e When a parent unit is talking to the baby unit it is also broadcast to the other parent unit However sounds from the baby unit cannot be transmitted to the parent units at the moment Find page the parent unit Use this feature to find misplaced parent units 1 Press page on the baby unit All idle parent units ring and display PAGING 2 To end paging press any key on the parent unit or press page on the baby unit f9 NOTES e Paging rings all parent units even if the speaker volume of parent unit is set to VOLUME OFF e The baby unit cannot page
13. ecommend you connect the parent unit to AC power e If the parent unit will not be used for a long time disconnect and remove the battery to prevent possible leakage Parent unit display icons Connection status e Yildisplays when strong signal strength is detected between the baby unit and the parent unit Yi displays when moderate signal strength is detected between the baby unit and the parent unit Y displays when the weak link signal strength is detected between the baby unit and the parent unit Y flashes when the link between the baby unit and the parent unit is lost Projector e Displays when the projector of the baby unit is on Sound alert e Displays when the sound alert of the parent unit is turned on e Flashes when there are sounds detected from the baby unit and the parent unit is in mute Vibration alert e Displays when the vibration alert of the parent unit is turned on e Flashes when there are loud sounds detected from the baby unit Mute e Displays when the volume is turned off Battery status C gt gt gt M animates when the battery is charging displays solid when the battery is fully charged displays when battery is in low level and needs charging No battery icon displays when there is no battery installed Connect and charge the battery NOTES Use only the parent unit power adapter or the baby unit power adapter supplied with this product e Make sure t
14. ectronic products may cause interference with your baby monitor Try installing your baby monitor as far away from these electronic devices as possible State Provincial Law Rights This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province Limitations Implied warranties including those of fitness for a particular purpose and merchantability an unwritten warranty that the Product is fit for ordinary use are limited to one year from the date of purchase Some states provinces do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you In no event shall VTech be liable for any indirect special incidental consequential or similar damages including but not limited to lost profits or revenue inability to use the Product or other associated equipment the cost of substitute equipment and claims by third parties resulting from the use of this Product Some states provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you Please retain your original sales receipt as proof of purchase Important safety instructions When using your equipment basic safety precautions should always be followed to reduce the risk of fire electric shock and injury including the following 1 Follow all warnings and instruct
15. ert so that the parent unit vibrates when the baby unit detects sounds which light up four sound level indicators on the parent unit When the vibration alert of the parent unit is turned on amp displays The vibration alert is preset to OFF 1 Press menu when the parent unit is not in use 2 Press volume or volume to choose VIBE ALERT then press select 3 Press volume or volume to choose ON or OFF 4 Press select to confirm your selection The screen displays SAVED and you hear a confirmation tone f9 NOTES Each time you set the vibration alert to ON the parent unit vibrates briefly after you press select e The vibration alert setting on each parent unit is independent Overview Baby unit overview Projector e When itis on it projects some image patterns to the user environment 3 Control key panel power on e Press to power on e Press and hold to power off page e Press to start or stop paging parent unit volume e Press to increase the listening volume or lullaby volume volume e Press to decrease the listening volume or lullaby volume 2 e Press to turn on or off the projector and lullaby Magnetic base e Powerjack Language You can select a language English French or Spanish to be used in all screen displays The language is preset to English 1 Press menu when the parent unit is not in use 2 Press volume or volume to choose LANGUAGE
16. ess devices at least six inches from the pacemaker e Should NOT place wireless devices directly over the pacemaker such as in a breast pocket when it is turned ON WTR s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices Electromagnetic fields EMF This VTech product complies with all standards regarding electromagnetic fields EMF If handled properly and according to the instructions in this user s manual the product is safe to be used based on scientific evidence available today The RBRC seal The RBRC seal on the nickel metal battery indicates that VTech Communications Inc is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives when taken out of service within the United States and Canada The RBRC program provides a convenient alternative to placing used nickel metal batteries into the trash or municipal waste which may be illegal in your area VTech s participation in RBRC makes it easy for you to drop off the spent battery at local retailers participating in the RBRC program or at authorized VTech product service centers Please call 1 800 8 BATTERY for information on Ni MH battery recycling and disposal bans restrictions in your area VTech s involvement in this program is part of its commitment to protecting our environment and conserving natural resources RB
17. gs in the back or bottom of this product are provided for ventilation To protect them from overheating these openings must not be blocked by placing the product on a soft surface such as a bed sofa or rug This product should never be placed near or over a radiator or heat register 18 Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit Never spill liquid of any kind on the product 19 To reduce the risk of electric shock do not disassemble this product but take it to an authorized service facility Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks Incorrect reassembling can cause electric shock when the product is subsequently used 20 You should test the sound reception every time you turn on the units or move one of the components 21 Periodically examine all components for damage 22 Be aware of possible loss of privacy while using public airwaves Conversations may be picked up by other nursery monitors cordless phones scanners etc 23 Children should be supervised to ensure that they do not play with the product 24 The product is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the applia
18. he electrical outlets are not controlled by wall switches e The parent unit power adapter and baby unit power adapter are intended to be correctly oriented in a vertical or floor mount position The prongs are not designed to hold the plug in place if it is plugged into a ceiling under the table or cabinet outlet e Make sure the parent unit the baby unit and the power adapter cord are out of reach of children Connect the baby monitor Parent unit display screen messages When the link between the parent unit and the baby unit is established The parent unit uses only the rechargeable battery pack and it needs to be recharged When the link between the parent unit and the baby unit is lost continuously for over 10 seconds All idle parent units are being paged by the baby unit Your selection has been saved The parent unit is out of range of the baby unit or the baby unit is out of power The parent unit is talking to the baby unit The other parent unit is talking to the baby unit Charge the parent unit battery Once you have connected the parent unit and installed its battery it powers on automatically The battery icon indicates the battery status see the following table f9 NOTES e The parent unit battery is fully charged after 11 hours of continuous charging e It takes longer to charge the battery when the parent unit is turned on To shorten the ch
19. ions marked on the product 2 Adult setup is required 3 This product is intended as an aid It is not a substitute for responsible and proper adult supervision and should not be used as such 4 This product is not intended for use as a medical monitor 5 Do not use this product near water For example do not use it next to a bath tub wash bowl kitchen sink laundry tub or swimming pool or in a wet basement or shower 6 CAUTION Use only the batteries indicated in this manual There may be a risk of explosion if a wrong type of battery is used for the parent unit Use only the supplied rechargeable battery or replacement battery pack BT166342 BT266342 for the parent unit Do not dispose of batteries in a fire They may explode Dispose of used battery according to the information in The RBRC seal 7 Use only the adapters included with this product Incorrect adapter polarity or voltage can seriously damage the product Baby unit power adapter Input 100 120V AC 150mA 60Hz Output 6V DC 600mA Parent unit power adapter Input 100 120V AC 150mA 60Hz Output 6V DC 400mA 8 The power adapters are intended to be correctly oriented in a vertical or floor mount position The prongs are not designed to hold the plug in place if it is plugged into a ceiling under the table or cabinet outlet 9 For pluggable equipment the socket outlet shall be installed near the equipment and shall be easily accessible 10 Unplug this
20. motors or fluorescent lamps DO NOT expose it to direct sunlight or moisture Avoid dropping the product or treating it roughly Clean with a soft cloth DO NOT immerse the parent unit and the baby unit in water and do not clean them under the tap DO NOT use cleaning spray or liquid cleaners Make sure the baby unit and parent unit are dry before you connect them to the mains again Storage When you are not going to use the baby monitor for some time remove the rechargeable battery from the parent unit Store the parent unit the baby unit and the adapters in a cool and dry place Frequently asked questions Below are the questions most frequently asked about the baby monitor If you cannot find the answer to your question visit our website at www vtechcanada com or call 1 800 267 7377 for customer service Why does the baby monitor not respond normally Try the following in the order listed for common cure Disconnect the power to the baby unit and the parent units Remove the batteries in the parent units Then install the batteries again Wait a few minutes before connecting power back to the baby units and the parent unit Turn on the baby unit and the parent units Wait for the parent units to synchronize with the baby unit Allow up to one minute for this to take place Why doesn t the screen of the parent unit go on when switch on the unit Perhaps the rechargeable
21. nce by a person responsible for their safety SAVE THESE INSTRUCTIONS Cautions 1 Use and store the product at a temperature between 32 F and 104 F 2 Do not expose the product to extreme cold heat or direct sunlight Do not put the product close to a heating source 3 Batteries should not be exposed to excessive heat such as bright sunshine or fire 4 Make sure the baby unit s and the adapter cord s are always out of reach of the baby at least 3 feet away from the baby or crib to avoid a possible strangulation hazard 5 Never place the baby unit s inside the baby s crib or playpen Never cover the baby unit s or parent unit with anything such as a towel or a blanket 6 Other electronic products may cause interference with your baby monitor Try installing your baby monitor as far away from these electronic devices as possible wireless routers radios cellular telephones intercoms room monitors televisions personal computers kitchen appliances and cordless telephones Precautions for users of implanted cardiac pacemakers Cardiac pacemakers applies only to digital cordless devices Wireless Technology Research LLC WTR an independent research entity led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers Supported by the U S Food and Drug Administration WTR recommends to physicians that Pacemaker patients e Should keep wirel
22. ound level detected by the baby unit e One to three green lights indicate a moderate sound level detected by the baby unit e Additional red lights indicate a higher sound level detected by the baby unit e g baby crying loudly Speaker volume level O O One tothree green the parent unit is in use lights indicate Level 1 to Level 3 of the talk speaker volume setting e Press and hold to talk to the baby Additional red unit release to stop talking lights indicate Level 4 to Level 5 of e While in a menu press to return to the speaker volume setting idle screen o feere Battery compartment cover u Battery level indicator Light on when the parent unit battery is being charged Light flashes when the parent unit battery is low and needs charging Light off when the parent unit battery is fully charged or when no battery is installed On off Press to power on Press and hold to power off Press to return to idle screen when kept 9 NOTE e Make sure the supplied rechargeable battery with the label THIS SIDE UP facing up Replace the battery To replace the battery unplug the battery connector from the socket and then pull the battery out of the battery compartment Follow the steps above to install the battery f9 NOTES The operating time for using the rechargeable battery is short If you want to monitor your baby for a long time we r
23. speaker volume for parent unit You can adjust the speaker volume from VOLUME 1 to VOLUME 5 or turn it off The speaker volume is preset to VOLUME 3 e Press volume or volume when the parent unit is not in use When the speaker volume is set to off the screen displays amp Before use You may test the baby monitor before initial use and at regular times thereafter Place the parent unit and the baby unit in he same room to test the product Test your audio monitor e Speak towards the microphone of the baby unit You will hear the sound at the parent unit and see the visual sound indicators light up Positioning the baby monitor SI NOTE e This baby monitor is intended as an aid Itis nota substitute for proper adult supervision and should not be used as such CAUTION e Keep the baby unit out of the reach of the baby Never place or mount the baby unit inside the baby s crib or playpen 1 Place the baby unit at least 1 meter 3 feet away from your baby f9 NOTE If you experience audio feedback on either the parent unit or baby unit move the parent unit further away until there is no more audio feedback or press volume on the parent unit to lower the audio feedback sound Adjust the sound sensitivity of the baby unit You can choose to hear sounds from the baby unit all the time or to hear sounds that exceed a cert
24. the Product failure is not covered by this limited warranty or proof of purchase does not meet the terms of this limited warranty VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty What must you return with the Product to get warranty service 1 Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty and 2 Include a valid proof of purchase sales receipt identifying the Product purchased Product model and the date of purchase or receipt and 3 Provide your name complete and correct mailing address and telephone number Other limitations This warranty is the complete and exclusive agreement between you and VTech It supersedes all other written or oral communications related to this Product VTech provides no other warranties for this Product The warranty exclusively describes all of VTech s responsibilities regarding the Product There are no other express warranties No one is authorized to make modifications to this limited warranty and you should not rely on any such modification Why doesn t the power on light of the baby unit go on when switch on the unit Why does the baby monitor produce a high
25. u can increase the speaker volume of the parent unit if you cannot hear the sounds transmitted from the baby unit 3 Press on the baby unit to turn on the projector It projects some colorful images to the environment Adjust the angle of the baby unit so that the images are clearly projected to the ceiling or a wall OD Operating range The operating range of the baby monitor is up to 300 meters 1 000 feet outdoors or 50 meters 160 feet indoors The actual operating range may vary depending on the environmental conditions and other interferences such as walls doors and other obstructions S9 NOTE e To enter the sensitivity menu of the parent unit the baby unit must be turned on Sound alert Sound alert feature works only when the parent unit is in mute If you turn on the sound alert the parent unit beeps when the baby unit detects sounds which light up four sound level indicators on the parent unit When the sound alert of the parent unit is turned on displays The sound alert is preset to OFF 1 Press menu when the parent unit is not in use 2 Press volume or volume to choose SOUND ALERT then press select 3 Press volume or volume to choose ON or OFF 4 Press select to confirm your selection The screen displays SAVED and you hear a confirmation tone 9 NOTE e The sound alert setting on each parent unit is independent Vibration alert You can turn on the vibration al
26. vtech User s manual Canada version DM222 DM222 2 Safe amp Sound Digital Audio Monitor 1 set for DM222 2 sets for DM222 2 Install the battery y Volume 7 7 d You can power up the parent unit by connecting it to AC power or to the rechargeable battery provided Even if the parent unit is connected to AC power we recommend you also install the battery This guarantees continual operation in case of a power outage Congratulations on purchasing your new VTech product Before using this product please read S9 NOTE Important safety instructions e Use only the battery supplied with this product For support shopping and everything new at VTech visit our website at www vtechcanada com Install the battery as shown below Parent unit overview Control key panel menu e Press to enter the menu while idle select e While in a menu press to choose an item or save a setting back e While in a menu press to return to the previous screen e Press to return to idle screen volume e Press to increase the speaker volume e While in a menu press to scroll up volume Visual sound indicator e Press to decrease the speaker OO900 OC volume The visual sound indicator has two e While in a menu press to scroll down functions One is to show the sound level detected by the baby unit The other one is to show the volume level during speaker volume setting S
Download Pdf Manuals
Related Search