User Manual Ahead Software AG
Contents
1. Device Erase disc 0 Quick erase The disc will be blank afterwards and the entire surface Will have been erased not leaving any data on the disc Thus it can be used with Mero or other recording applications In order to use the disc with InCD after Full erase you Would hawe to format it again Options Eject 5 Select the desired method of erasure and click on the Start button InCD Working with InCD e 22 InCD On If you insert the disc you have just erased the format dialog will be displayed just as with every other blank disc You cannot run any other operations on the same disc during the erasure process Nevertheless if you have several recorders you can process each inserted disc independently from the others e g if you have two recorders you can erase two discs at the same time or erase one while formatting the other Working with InCD e 23 4 Commands 4 1 Introduction You can right click the mouse on the InCD symbol in the System Tray to open a context menu Select and click with the mouse to execute commands About Help Options In Windows Explorer right click the mouse on the recorder s drive icon to open a context menu Provided a rewritable disc is inserted there are three commands for use with InCD To avoid confusion the other commands are not shown on the screenshot below In _O Format In_O Erase Eject 4 2 About The About command displ2. software Thank you for your support Microsoft Windows The system has recovered from a serious error A log of this eror has been created Please tell Microsoft about this problem We have created an error report that you can send to help us improve Microsoft Windows Wie wall treat this report as confidential and ANONYMOUS To see what data this error report contains click here Send Error Report 1 2 2 Existing packet writing software Y InCD can handle discs formatted by other packet writing software However InCD is not compatible with other packet writing software You must uninstall any other packet writing packages prior to your InCD installation Before the installation begins InCD checks the installed applications and exits the set up procedure if it finds another packet writing program A window is displayed with a message explaining this InCD About InCD e 6 1 2 3 InCD CD MRW DVD MRW Mount Rainier To format discs in the so called MRW Mount Rainier format using InCD check the corresponding check box if InCD detects a recorder that supports MRW then this option will be enabled by default The RW disc will then become an MRW disc once formatting is complete The check box is to be found in the InCD Options dialog box for overall control and in the drive properties InCD tab for per drive control In both places this option is only modifiable if the recorder supports this function There is m
3. 1 2 1 2 1 InCD About InCD Information about InCD InCD is a program which formats rewritable discs CD RW DVD RAM DVD RW and DVD RW in such a way that they can be used like hard disks or floppy disks This means that you can save copy or delete files from any application onto the disc InCD uses only rewritable discs CD RW DVD RAM DVD RW DVD RW Discs which can only be written to once CD R DVD R or DVD R cannot be used with InCD Hints on working with InCD Operating systems The system requirements for InCD are as follows Hardware CD DVD Rewritable compatible recorder MMC Compliant Multi read RW Recorder Software Windows 95 Version B Service Release 2 onwards with the DCOM95 update available if you install Internet Explorer 4 0 Windows 98 Windows Me Windows NT 4 0 with IE 4 0 Windows 2000 Windows XP Windows Server 2003 Disc type Rewritable disc CD RW DVD RW DVD RW and DVD RAM Note for users of Windows 95 98 Me InCD is not compatible with the Adaptec CD Burning Plug in which is installed as part of Windows Media Player 7 x Please uninstall the plug in using Add Remove Programs from the Control Panel About InCD e 5 To Windows XP users lf InCD causes a serious error you can send the error log to Microsoft by clicking on the Send Error Report button Microsoft will then forward it to Ahead Software so that our software developers can analyze the error and improve the
4. 9 2 3 InCD You cannot update from InCD 3 x to InCD 4 You first have to uninstall InCD 3 x before installing InCD 4 5 Read the license terms and conditions carefully and then choose the I accept the terms in the preceding license agreement option if you agree to the terms of the agreement Then click on the Next button You cannot install InCD unless you agree to the license terms Enter your user name in the User name field If InCD is installed on a company computer you must also enter the firm s name in the Company name field This is obligatory you must enter data in this field We recommend that private users repeat their user name in this field The default installation folder is C Program Files Ahead InCD You can change this folder by clicking on the Change button and entering the folder of your choice When all the details are correct click on the Next button You must restart your computer before you can use InCD Click on the Restart button to restart your computer If you click on the Exit button the installation program will be closed You cannot use InCD until you have restarted your computer Uninstalling InCD The uninstall window varies depending on the operating system ll Choose START gt SETTINGS gt CONTROL PANEL gt ADD REMOVE PROGRAMS Select Ahead InCD and click on the appropriate button InCD will be uninstalled immediately without furth
5. disc while it is being formatted in the background see the Background formatting section Fully formatting an already formatted medium takes only one to two minutes DVD RAM The disc is ready for you to write on after only one to two minutes of formatting A DVD RAM disc includes several types of write protection Cartridge switch media write protection etc If any of them is active you will be unable to perform any disc operation that calls for writing on the medium such as formatting erasing or of course writing on the disc For more information please refer to the Drive properties paragraph DVD RW and DVD MRW The disc is ready for you to write to after only one to two minutes of formatting This means that you can save data to the disc while it is being formatted in the background see the Background formatting section Working with InCD e 13 3 3 InCD Format You must format unformatted discs before you can use them with InCD In this case only the Format option is available in the InCD Format dialog box Format L Device au Format disc MAY Format Uther options Label Close ar E Verify after format Doo In the specific case of DVD RW discs both Format and Quick format options are available InCD treats CD RW CD MRW DVD RW DVD RW and DVD MRW discs differently CD RW DVD RAM DVD RW CD MRW DVD RW DVD MRW Ultra Speed discs take
6. format on an already formatted disc please follow the procedure described in Ejecting a CD MRW a DVD RW or a DVD MRW in order to eject it InCD Working with InCD e 19 3 5 4 Loading a disc When a disc is ejected and the recorder s door is still open the InCD ejection command changes from Eject to Load The effect of choosing this action will be to close the recorder s tray Your recorder may or may not support this feature depending mostly on whether Y it has a motorized tray or not The Eject command is changed to Load in the drive s right click contextual menu Expand Explore Open Search Sharing and Security Copy Properties and in the Format and in the Erase dialog windows Format G all Device Format disc Uther options Label Mo CO RYM diac in drive PO InCD Working with InCD e 20 3 6 Copying data to a disc formatted using InCD You can use a disc formatted with InCD in the same way as a hard disk or floppy disk This means that you can copy data onto the disc simply by using drag and drop or else retrieve documents stored by other applications 1 Insert a formatted disc into the recorder 2 Open Windows Explorer select the data you want to copy and drag and drop it onto the recorder s drive icon Or retrieve the documents from the other applications When saving documents you can also select the recorder s drive as any other drive If a writeable for
7. AA User Manual nCD 4 Ahead Software AG Information on copyright and trade marks The InCD user manual and all its contents are protected by copyright and are the property of Ahead Software All rights reserved This user manual contains material that is protected by internationally valid copyright This manual may not in whole or in part be copied transmitted or otherwise reproduced without the express written permission of Ahead Software AG All trade names and trademarks are the property of the respective owners Ahead Software rejects any claims that transcend the legal guarantee rights Ahead Software AG does not undertake any liability for the correctness of the content of the InCD user manual The contents of the software supplied as well as of the InCD user manual may be changed without prior warning The trademarks mentioned here are only listed for information purposes Copyright 2003 Ahead Software AG REV 1 4 Mount Rainier and EasyWrite Reader are properties of the Mount Rainier Group Be aware that some early versions of InCD 4 do not include all of the features presented herein Check for the newest version on www nero com Contents InCD PD OUTING D isc 5 1 1 Information about INCD cic tee ia 5 1 2 Hints on working with InNCD ooococccconnconnccccononcconcnconaronnnnonarennnnnnos 5 121 Operating SYSIOMS scada ad 5 1 2 2 Existing packet writing software ooccoonccconococnconncocnnon
8. about ten minutes to format High Speed discs take about 20 minutes and low speed discs around 40 minutes The disc is ready for you to write on after only one to two minutes of formatting It takes about 90 minutes to fully format a blank disc Quick formatting a blank disc takes only one to two minutes You can save data to the disc while it is being formatted in the background Fully formatting an already formatted disc takes only one to two minutes The disc is ready for you to write to after only one to two minutes of formatting This means that you can save data on the disc while it is being formatted in the background You cannot run any other operations on the same disc during the formatting process Nevertheless if you have several recorders you can process each inserted disc independently of the others For instance if you have two recorders you will be able to format two discs at the same time or format one while the other is being written on or erased Working with InCD e 14 1 Insert a disc into the recorder 2 Start Windows Explorer 3 Right click with the mouse on the recorder s drive icon 4 Select the InCD Format command from the menu Explore Open Search In_O Erase This opens the formatting dialog which automatically uses the recorder you have selected Format HA Ea lx Device Format disc Quick format erase file system Uther options Label PO 5 If you
9. ays information about the version of InCD that is currently installed on your system 4 3 Help The Help command opens the InCD help file InCD Commands e 24 4 4 Options The Options command opens the InCD program settings window InCD Options Program options Launch InCD when blank dise inserted Hide tray icon Show the system tray icon changes continuously Do not show Format complete message Language English English Cancel To save the changes you have made click on the Apply button and the dialog box will close To close the dialog box without saving the changes click on the Cancel button Program options Launch InCD when blank diac ingerted Hide tray icon MAW Format on all MAM capable drives m MAM Format on all MAM capable drives _ Show the system tray icon changes continuously Do not show Format complete message InCD If this check box is activated the Format dialog will pop up when you put a blank disc in the drive Default If this is unchecked the InCD icon appears in the system tray Default If the check box is activated discs on all MRW compatible drives will be formatted as MRW For per drive MRW control see Drive properties Default The check box appears gray deactivated if no MRW compatible recorder is installed This means that you have several drives supporting Mount Rainier and that not all of th
10. ck on the OK button For the change to become effective Cancel Changing the write protection setting is only possible if the If the DVD RAM Write protection checkbox has been grayed it means that you o are not allowed to change it Please first check that you do not have an InCD Format or Erase dialog window opened 4 6 InCD format The InCD Format command opens the Format dialog box You will find detailed information about it in the Format and Discs supported by InCD sections Format G4 ai E Device Format disc 2 Format Other options Label mmi _ Verify after format Eject InCD Commands e 28 4 7 InCD delete The InCD Delete command opens the delete dialog See the Erasing discs section for full details Erase G 4 Sliced Device Erase disc O Erase The disc will be blank afterwards Thus it can be used with Nero or other recording applications ln order to use the disc with lnCO after quick erase you would have to format it again Options Eject 4 8 Eject The Eject command causes the disc in the drive to be ejected You will find more detailed information in the Ejecting a disc section InCD Commands e 29 5 Index C CD RW Ejecting 19 Command Eject 29 Copying Disc 21 D Disc Copying to 21 DVD RAM Write Protection 27 DVD RW Ejecting 19 E Ejecting CD RW 19 DVD RW 19 E Formatting 14 Background format 16 F
11. em are currently set to format an inserted disc as MRW For more information see Drive properties If this option is unchecked the system tray icon changes will only be temporary If checked it will allow the continuous display of those disc status indicating icons Read Starting InCD for more information If this check box is deactivated a message is displayed to indicate when the formatting process is complete Default Commands e 25 Language Enalish English InCD automatically selects the language according to your local settings 4 5 Drive properties Right click the mouse in Windows Explorer on the recorder drive s icon to open the context menu Then choose the Properties command Eject Lopy Paste Create Shortcut Properties InCD provides an InCD tab with information on the recorder and the disc that has been inserted You will find more information about the icon displayed in the section Starting InCD InCD G Properties General AutoPlay Hardware InCD Sharing Recording Identification information EG CD R Volume name InCD Drive capabilities information Drive supports MAW read Drive supports MAYA write Disc status Disc speed High Disc type CE A High Speed InCD Commands e 26 InCD From here you also have access to several features 1 You can control whether this drive should format the disc as Mt Rainier or not p
12. er prompting and all installed drivers will be deleted You will be prompted to reboot lt is advised that you do so since the drivers might still be active e g if you have an InCD formatted disc in your burner Click on the Restart button Installation e 10 3 Working with InCD 3 1 Starting InCD When you start your computer InCD will be launched automatically There is no link to InCD in the Programs folder The InCD icon appears in the system tray which is usually in the bottom right hand corner of the screen The InCD icon shows information about the CD which is currently in the drive or about the drive itself lt is possible to show this information only for a few seconds at the time the status changes then the icon will change back to the normal icon or continuously Please refer to the FAQ it can be found in the InCD installation folder and to the Options section of this manual for more details InCD icon InCD mounted the disc in the DVD CD RW drive InCD recognized the disc in the DVD CD RW drive but could not mount it InCD mounted the disc in the DVD CD RW drive but access to the disc is read only DP DO InCD did not detect a disc in the drive InCD Working with InCD e 11 3 2 Discs supported by InCD 3 2 1 CD RW Ultra speed discs take about ten minutes to be formatted High speed discs take about 20 minutes and low speed discs around 40 minutes A CD RW must be completely formatted be
13. fore you can use it with InCD Y Here are the different CD RW media speeds available at the time this manual was written 1 4x Low speed High Speed wise Ultra Speed TISE d ISG ReWritable Ultra Speed Mist Can be burnt only with Ultra Speed drives The Ultra z Sometimes referred to as normal speed or multi speed Can be burnt in any RW recorder 4 10x 4 12x Can be burnt with High Speed Ultra Speed and Ultra Speed drives High Speed CD RW and High Speed capable drives feature the High Speed logo 16 24x Can be burnt only with Ultra Speed or Ultra Speed capable drives The Ultra Speed drives and discs feature the Ultra Speed logo 32x Speed drives and discs feature the Ultra Speed logo The logos shown here are the property of Philips 3 2 2 CD MRW The disc is ready for you to write on after only one to two minutes of formatting This means that you can save data on the disc while it is being formatted in the background see the Background formatting section Y As for CD RW the same restrictions concerning disc speed and recorder speed compatibility apply InCD Working with InCD e 12 3 2 3 3 2 4 3 2 5 InCD DVD RW It takes about 90 minutes to fully format a blank DVD RW 1x DVD RW Nevertheless you can also perform a quick format The disc will then be ready for writing after just one to two minutes of formatting This means you can save data on the
14. his eject the disc launch Nero insert the disc choose Erase CD RW from the Recorder menu and choose Full erase rewritable media as erase method Depending on the recorder and the disc the erase process will last between 10 and 20 minutes 1 Insert a formatted disc into the recorder 2 Start Windows Explorer 3 Right click on the recorder s drive icon and select the InCD Format command from the menu Explore Open Search Int Erase InCD Working with InCD e 17 The formatting dialog opens and automatically uses the drive you selected Format L Device Format disc MAY O Fama 2 Quick format erase file system Other options Label PO 4 If you want you can enter a name for the disc The name may have a maximum of 11 characters blank spaces are not permitted 5 Click on the Start button to start the formatting process 6 You will see a format completion notice if you checked this option in the general options available via the system tray icon or via the Options button in the Format and Erase dialogs Formatting L 1 3 Format complete 1 _ Do not show this message in future Reformatting a disc should not take longer than two minutes InCD Working with InCD e 18 3 9 Ejecting a disc InCD treats CD RW DVD RAM DVD RW CD MRW DVD RW and DVD MRW discs differently Please refer to the appropriate section below 3 9 1 Ejecting a CD RW
15. matted disc is inserted in a recorder you can send data to it Y using the Send to command of the contextual right click menu For more information on this command please consult your operating system s documentation Expand Explore Open Search Sharing and Security Send To d Compressed zipped Folder Cut E Desktop create shortcut ail Paste Y Mail Recipient Delete My Documents Rename q 31 Floppy 4 4 Properties InCD Working with InCD e 21 3 7 Erasing discs Erasing a rewritable disc is not like deleting data from a floppy disk or a hard disk Erasing a disc also removes the formatting leaving the disc completely blank After erasure the disc will be like brand new This means it can be burned using Nero or otherwise Erase and Quick erase differ in one very simple way A quick erase operation o only erases the file system structures from the disc making it appear as blank even though the data is still physically present An erase operation zeroes the whole disc making it really blank Choose full erase if you want to get rid of confidential data 1 Insert a formatted disc into the recorder 2 Start Windows Explorer and select a recorder drive 3 Right click on the recorder s icon and select the InCD Erase command from the menu Explore Open Search Into Format IEEE O 4 The erasure dialog opens and will automatically use the selected recorder Erase G
16. on drives that do not support this format CD MRW DVD MRW you will need a so called remapper the EasyWrite Reader lt is not installed as part of the InCD installation process so you will need to install it separately Depending on the operating system in use you may also have to install InCD You can find the information you need in the following table Windows 95 You need the remapper in order to be able to read CD Windows 98 MRW DVD MRW You can download it free of charge Windows Me from http www nero com Windows 2000 Windows XP Windows Server 2003 Windows NT You cannot read CD MRW DVD MRW using only the remapper For this operating system you must install InCD as well as the remapper Y The remapper will not allow you write MRW discs Only recorders that are MRW write compliant can write MRW discs 1 2 4 UDF reader driver On a PC running Windows 95B or Windows 98 or Windows ME and on which InCD is not installed in order to be able to read a disc formatted using InCD you need a UDF reader driver This driver is part of the above mentioned EasyWrite Reader You can download it free of charge from Ahead Software AG s web site at www nero com o Note for users of Windows NT4 The current UDF driver version does not support Windows NT4 If you are running NT4 you must install InCD instead of the UDF driver InCD About InCD e 8 2 2 1 2 2 InCD Installation Introduction InCD comes in several in
17. onocaniconnnnononos 6 1 2 3 CD MRW DVD MRW Mount Rainier occoccccocnccccncccccccccccnnccncnnos 7 L24 IDF Fedde Ve enrera iia 8 INsStalaton lt nia a n 9 2 1 INTCOdUcION rad 9 2 2 IVS Cal WAI ON accccsceccccaccnnsssesacesncssccnanansentaatsces A 9 2 3 Uninstalling NGD a OS 10 Working with INCD riada 11 3 1 Staring y SD 3s ents cise ns EEO a a eten eee 11 3 2 Discs supported by InCD nccocccoconinccinnnconcncccnnonanonannonaronancnnanenas 12 Oe CO Wicca idos 12 iZ AGAN E OOO 12 32 DVDRW 285i oss tetas endive sect scent neta a a 13 324 DIDIER AM ta e aaa oo fe big aclu ada 13 3 2 0 DVDRW and DV DAEMIRW sra 13 3 3 FO Matias 14 3 041 Background TORMIGUUIING si coco ir aia icebia 16 332 DISC VENCIO iras 16 3 4 Quick TormattINQ asias dd 16 3 5 EJCCUNG a ISC unicidad 19 3 5 1 Ejecting a CD RW or a DVD RAM ooooocccccccnccccccnccoconocnconnncococonononos 19 3 5 2 Ejecting a CD MRW a DVD RW or a DVD MRW occccccncnco 19 40 3 Ejec a DVD RW kerrec idad A 19 254A Loading aA GISG sesers acces sneseseeclecess cas fuss 20 3 6 Copying data to a disc formatted using InCD eee 21 3 7 Erasing ISC atacada 22 Contents e 3 InCD 4 1 4 2 4 3 4 4 4 5 4 6 4 7 4 8 IN TROGU CTO Mindo 24 A Dene or Een ne ere nee ee ore ene ee er eee ee ene ee eee 24 O 24 OPINAS riiin a 25 PIV SDF OIG OS ita 26 HAG DD TAM e 28 AP o sccadeesindeiaserniaeee 29 Elis 29 o APP 30 Contents e 4 1 1 1
18. or a DVD RAM You can eject a formatted CD RW DVD RAM by using the Eject command in the right click drive contextual menu read the Introduction by pressing the eject button on the recorder or by clicking the Eject button in the Format or Erase InCD dialog windows 1 Use one of the ejection methods 2 Take the disc out of the recorder and close the tray Y You can also close the tray using the Load command described below Loading a disc 3 9 2 Ejecting a CD MRW a DVD RW or a DVD MRW You can eject a CD MRW a DVD RW or a DVD MRW that has not yet been fully formatted by using the Eject command in the right click drive contextual menu read Introduction by pressing the eject button on the recorder or by clicking the Eject button in the Format or Erase InCD dialog windows 1 Use an ejection method lf background formatting is still in progress it will need to be suspended and a dialog will appear telling you that the process will take one to two minutes InCD Warning on Drive L Whiting data to disc This should take less than 60 seconds 2 Take the disc out of the recorder and close the tray 3 9 3 Ejecting a DVD RW If the disc was blank and has been fully formatted please follow the procedure described in Ejecting a CD RW or a DVD RAM in order to eject it If the disc is undergoing a background format in other words if you started a quick format on a blank disc or a full
19. ore on this in the Options and Drive properties sections Inco Options Program options Launch InCD when blank disc inserted Hide tray icon Show the system tray icon changes continuously Do not show Format complete message Language English Enalish a In contrast to CD RW MRW discs can be written to after only about one minute of formatting This does not mean that the MRW is fully formatted after two minutes but simply that it is formatted enough for you to be able to write data on it The remainder of the formatting goes on in the background Mount Rainier is also known as EasyWrite You can find additional information about Mount Rainier at http Awww mt rainier org You can only write data in MRW format with drives that support the format You must also ensure that the MRW Format on all MRW capable drives checkbox has been ticked Drives that do not support Mt Rainier can only read such discs with a remapper see the Remapper section Most drives supporting Mount Rainier feature the EasyWrite logo Easywrre The EasyWrite logo is a registered trademark of Philips About InCD e 7 1 2 3 1 Disc type CD MRW discs are standard CD RW discs formatted as MRW on a recorder that supports Mt Rainier In addition DVD MRW discs are standard DVD RW discs formatted as MRW on a Mt Rainier supporting recorder 1 2 3 2 Remapper In order to be able to read discs in Mount Rainier format
20. rovided your drive supports Mt Rainier Make sure you click on Apply to get any change taken into account The format and erase operations are also available provided the drive contains a compatible disc Just click on the corresponding button To learn more about disc drive compatibility read the Discs supported by InCD section If a DVD RAM is currently inserted in the drive whose properties are displayed then a media specific checkbox is displayed It shows the current write protection status of the inserted disc and where applicable allows you to change it Make sure you click on Apply to get any change taken into account LooBdootro H Properties General AutoPlay Tools Hardware ICO Sharing Recording Identification information a H DVD RAM Volume name LooBdootro Drive capabilities information Drive supports MAY read Drive supports MAYA write Disc status Disc speed Normal Disc type DVD RAM UDF v1 50 write protection It is impossible to modify the write protection state while formatting or erasure is in progress Moreover changing it during any other disc operation such as a file copy is absolutely not to be recommended A warning message will therefore be displayed if you have modified the write protection state Commands e 27 Warning disc is currently not being used by any application Should the disc be in use please wait For the operation to Finish then cli
21. stallation packages CD ROM multi installer This pops up when you insert the Nero CD ROM in your drive and when the auto insert notification is enabled on your system CD ROM standalone installer You can install InCD bypassing the multi installer by directly launching the InCD installer to be found on the CD ROM Internet standalone installer You can download its Web installer but if you want to install InCD you must have a registered version of either Nero or Nero Express Installation You must have administrator rights to install the software on Windows NT 4 0 Windows 2000 Windows XP Pro or Windows Server 2003 Close all the Windows applications you are not running and close any anti virus software that may be running Put the InCD disc in the CD or DVD drive or download InCD s Web installer from www nero com for instance Start installation CD ROM multi installer click on the InCD area of the start window CD ROM standalone installer browse your CD ROM and there open a folder called InCD if the CD ROM is a Nero 5 5 CD ROM or InCD4 if you have a Nero 6 CD ROM Launch the Setup exe file which is located in this folder by double clicking on it Internet standalone installer launch the downloaded file 4 Click on the Next button to install the software If there is an existing version of InCD 4 installed you can update it by clicking on the Next button Installation e
22. th verification can take up to one hour DVD RW Format with verification can take up to two hours aa Format with verification should usually take about one hour but it DVD MRW may last up to two hours with worn out media Quick formatting If the disc has already been formatted you do not necessarily have to do a complete reformat you can also do a quick format This means that the disc is only formatted logically the data on the disc is not deleted only the information about the data on the disc is In other words although the data is still present the disc appears to be empty That means that the full capacity of the disc is available again As it is still possible for an expert to restore the data this formatting method should not be used for discs that contain confidential data This feature works a little differently for DVD RW discs depending on the whether the inserted DVD RW is blank or not For already formatted media quick format works as described above For blank media quick format corresponds to a background format as described in Format Working with InCD e 16 Notice that the check option is not available Format L Device Format disc MAY Format 2 Quick format erase file system Other options Label PO Y lf a disc has been rewritten several times the formatting process may be interrupted because of errors in some cases In this case we recommend erasing the disc with Nero To do t
23. ull formatting 18 Full formatting Format option 18 Icon 11 26 InCD Deleting 22 Uninstalling 10 Update 9 M Media speed 12 InCD Mount Rainier 7 8 N Nero 17 22 U Uninstalling InCD 10 Update 9 W Windows Media Player 5 Index e 30
24. want to you can enter a name for the disc This name can have a maximum of 11 characters blank spaces are not accepted 6 You can check the disc for physical defects In this case check the Verify checkbox The time taken varies according to disc size Please read the Disc verification section for more details 7 Click on the Start button to start the formatting process InCD Working with InCD e 15 3 3 1 3 3 2 3 4 InCD 8 You will see a format completion notice if you checked this option in the general options available via the system tray icon or using the Options button in the Format and Erase dialogs Formatting L Format complete JU _ Do not show this message in future Background formatting The formatting process is done by the drive itself while it is idle i e not used for reading or writing The background format will be interrupted if you try to access the disc in order to read it write on it or to eject it and it will be resumed once the drive is idle again and containing the above mentioned disc This also applies if you shut down your PC during background formatting Disc verification Checking this option before starting the format process enables the surface of the disc to be verified Note that the formatting operation will then take longer The table below shows the approximate duration of this operation depending on the media used CD RW ae CD MRW Format wi
Download Pdf Manuals
Related Search