GeoPlayer manual - ID-AL
Contents
1. 45g Appendix B Functions Audio characteristics e Reads stereo MP3 files MPEG 7 layer 3 44 1KHz from 112kbit s to 320kbits s Reads CBR Constant Bit Rate files and VBR variable Bit Rate files Reads stereo Wav files 44 1kHz 16 bits Volume setting 32 steps from Mute to maximum SD Memory card Accepts SD card 64Mo minimum Formatted in FAT16 and FAT32 Supports long file names Interfacing Status indicator LED Infrared sensor Play Stop Next Previous Trigger Volume Volume Protocole SONY SIRC 12bits modulated at 38kHz 1 input on dry contact on Phoenix 3 81mm plug in connector External power supply connector DC 2 1 5 5 and internal Stereo output on mini jack and internal connector Amplified stereo output on screw in terminal block GPS antenna with MMCX connector GPS function Reception norm NEMEA 0183 V3 01 Protocole GPRMC upto 16 satellites Acquisition at 1Hz 1 per seconde Module precision 5m CEP Sensitivity 140dBm in acquisition 155dBm in surveillance Acquisition time 5 seconds hot 60 secondes cold MP3 Files encryption Compatible with encryption software tool v1 and v2 On request Waves System 16 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual Notes Waves System V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual Qus AVES http www id al com2. can be used to create this configuration file Excel type or Open Office equivalent An ID AL assistant is also available for download from the www id al com web site Example of table B C H 1 Position N Dd Latitude Dd Longitude Tolerance in m Mode Audio File Optional Comments 2 1 47 13833 1 680629 50 1 001 Start point 3 2 47 142004 1 6724 50 1 002 Monument 1 4 3 47 142183 1 667553 100 1 003 Town center statue 5 4 47 192874 1 570521 100 1 004 Town Hall 6 5 47 198654 1 561783 100 1 005 Monument 2 7 6 47 19956 1 56886 50 1 006 Arrival point 8 7 47 201515 1 572177 50 2 007 Danger dead end 9 8 47 205493 1 564276 100 2 008 Forbidden area 10 9 47 208277 1 565915 50 3 009 Church 11 10 47 210173 1 568486 50 3 010 Tourist office Column A Position number maximum 150 points Column B Latitude in Degree decimal format Dd use a dot not a coma as separator Column C Longitude in Degree decimal format Dd use a dot not a coma as separator Column D Tolerance in meters whole number no decimal Column E Trigger Mode 1 Track 2 Alarm 3 Free tour Column F Main audio file number to be read see chapter 4 3 digits mandatory text format Column G Optional comments Important notes in creating the configuration file Do not add any column Do not modify their order Do not add any line no extra header no empty line nor additional line at the end of the table Latitudes and longitudes stated in degree
3. decimal format Do not include units of measure nor symbols m km ONLY values Itis possible to indicate different trigger modes The broadcast order is defined by the Track mode order the 2 other modes have no order It is easier to put together locations with the same trigger mode The point number column A is only an indication and any figure can be used The sequence of broadcast is defined by the line number of the table After saving the completed table export it a csv file This is a text format supported by most spreadsheet software In the file menu choose save as and select format csv separated by semicolon Save this file under gps csv and copy it at the root of the SD card Do not change the name gps csv Waves System 13 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual 5 1 Finding GPS coordinates using GoogleMaps GPS coordinates of locations can be found for free from the GoogleMaps web site There are indicated in degree decimal format Connect to this address http maps google fr eb Images Maps Actualit s Vid o Messagerie plus v Mon profil Aide Historique Web Mon compte D connexi ex 87 rue bobilot paris ou Restaurant Japonais Paris 06 oog e Recherche Google Maps Afficher les options de recherche L hope Plan Commerces Itin raires R sultats Mes cartes Imprimer woyer amp e Obtenir l U
4. in the technical documentation or that have been expressly approved by the manufacturer The manufacturer cannot guarantee for the safety or proper functioning of the unit in the case where accessories or consumables are used which are not supplied by the manufacturer The warranty doesn t cover damages caused by use of accessories or consumables which are not supplied by the manufacturer The manufacturer only regard himself as being responsible for the equipment with regard to safety reliability and proper functioning if assembly re settings changes or modifications extensions and repairs have been carried out by the manufacturer or a company authorized by the manufacturer and if the equipment is used in conformity with the operating instructions written in this manual The AP103 MicroPlayer complies with the applicable technical safety standards at the date of print All rights reserved for electrical diagrams procedures mentioned names and equipments No reproduction in whole or in part without the written permission from Waves System A 4 General safety instructions This equipment left our facilities in perfect conditions of operation In order to maintain these conditions for safety and to avoid any risk of injury the user must imperatively follow the safety instructions and read the Warning notes in this manual This equipment manufactured by Waves System has been so designed that any danger is virtually exclude
5. 2 Alarm mode Use this mode when it is necessary to watch positions in no specific order and broadcast the associated audio files The message will loop as long as the player stays in the GPS position including the tolerance The Alarm mode has priority over the Track mode Typical use is to warn about danger in a specific zone e 3 Free tour mode Use this mode to broadcast messages during a tour without any pre defined sequence order All the positions are constantly watched In this mode it is not possible to broadcast different messages for a same position round trip situation to achieve this scenario the Track mode must be used Note It is possible to use different modes in a trip Locations specified in Alarm mode are permanently watched when only one point at a time is watched in Free tour mode The next location will only be triggered once the current location has been played amp Waves System 12 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual 5 1 Creation of the configuration file gps csv For the GeoPlayer to broadcast audio files associated to GPS positions it is necessary to create a configuration file which is a cross reference table between the audio files and the GPS data The table includes the following data latitude and longitude of the position tolerance around the point main audio file number to be broadcast broadcast mode and optional comments Any spreadsheet
6. L D AL GeoPlayer MP3 and WAV Player with GPS function Manual x Li ive Digita Audio Player MP3 amp WAV with GPS function MANUAL Waves System ID AL GeoPlayer MP3 and WAV Player with GPS function Manual Table of content A Safety instructions esssssssssssssssee eene P1 B ProductinfOEmiatiOniz cette eo e rr E E HERR Renee P3 1 Product presentation nnne P4 2 Functiorinalitles ertet eter tien bete pene e ee P4 3InstallatiOn iti ee pte eee cii at EU P5 4 Operating mode and naming of files sss P8 5 GPS configuration file P11 6 Infrared remote control seeenn en P15 Appendix A Characteristics osne meii entantinar na aa ananin P16 Appendix B Functionnalities eeen e P16 ID AL products are exclusively manufactured by Waves System LA VILLE EN BOIS 44830 BOUAYE FRANCE Sales and information 33 2 40 78 22 44 E mail info id al com Web site http www id al com Technical department support wsystem com Technical support For a detailed list of technical support options please visit our site www id al com Information in this manual is subject to change without notice and do not represent any commitment from Waves System The equipment described in this manual is supplied under condition of the terms of license spe
7. PS non connected LED flashing slowly Error signal SD card problem 4 8 Power supply If the player is powered with a filtered and regulated power supply unit or a battery the recommanded tension is 12V DC even if the player can be powered between 10V and 15V The current used will depend on the power of the amplifier Connector DC 2 1mm 5 5mm in the centre C Power supply 12V DC Connect a PSU or a 12V battery The 2 pins connector allows internal supply when the board is integrated Diode protection against polarity reversal 5 Infrared The GeoPlayer can be controlled with a infrared remote handset not supplied with the OEM board available as an option Waves System 6 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual 6 10 Input on dry contact Connect a push button to be able to select force the next GPS position when the GeoPlayer is in track mode See the GPS mode description chapter in the manual Create a brief contact between SW input and the ground G 12V power supply output to power an external device Input contact SW Ground G Ground G Input contact SW L2 12V power supply output sw O G 7 SD memory card Insert a memory card in the slot minimum storage capacity 64Mo When inserting or removing the memory card make sure that the player is not powered on 9 GPS extension co
8. RL de cette par Nouveau Suivez l actualit de Google Maps sur notre blog D couvrir les cartes les plus populaires Football Euro 08 L autre bout du monde Webcams sur webcams travel Autres cartes Q R f rencez votre entreprise sur Google Maps M Diffusez vos annonces sur Google Maps T4 Graz Magyarorsz g AC agyarorszag c ter Hay WD E ms Bosna WS Hercegovina SA LT Zoom on a selected value and press satellite tab to display the photo Web Images Maps Actualit s Vid o Messagerie plus v Mon profil Aide Historique Web Mon compte D connexion ex 87 rue bobilot paris ou Restaurant Ja 06 008 e Recherche Google Maps Afficher es ootons de recherche Maps France R sultats Mes cartes Nouveau Suivez l actualit de Google Maps sur notre blog D couvrir les cartes les plus populaires Football Euro 08 L autre bout du monde Webcams sur webcams travel Autres cartes Q R f rencez votre entreprise sur Google Maps N Diffusez vos annonces sur Google Maps Waves System 14 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual Place the mouse at the desire point on the map and do right click Then select directions from here A tag appears on the map and coordinates are displayed in the window on the left hand side of the screen The green tag can be moved around using the mouse C
9. a wet or excessively hot or cold place A 5 Safety instructions against risks pertaining to electrical current The appliance must be connected to a grounded AC power outlet or a correctly wired CEE AC outlet Before connecting the appliance verify that the power supply voltage and frequency match the specifications indicated on the appliance Before powering check that the appliance and the cables are not damaged Damaged cables and connections must be immediately replaced Never leave power cords enter in contact with other cables Handle the power cord and all the cables connected to a power supply with extreme care Always connect the power supply last Check that the power switch is off before connecting the appliance to mains supply The mains outlet must be accessible after installation Check the appliance and its power cord from time to time Unplug the power supply if you don t use the appliance anymore or for maintenance Always grasp only the plug on the power supply cord Never pull the cable to unplug Power supply repairs and maintenance must be done by qualified personnel Do not switch the appliance on and off in short intervals as this may reduce its life especially concerning the hard disk Waves System 2 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual A 6 Conditions of use This product has been designed for indoor use only If the d
10. ader on a PC Audio output Two audio outputs are available Line level stereo output on standard 3 5 stereo Mini jack to connect the player onto a sound system and amplified output on screw in terminal block to connect directly onto speakers The ouput power is sufficient for any vehicle Power supply The player is protected against polarity reversal Caution the NanoPlayer accepts variations between 10 and 15V Outside this range the player could be damaged Amplifier output power is determined by the power supply When the line level output is used a 500mA 6W unit is enough to power the player If the integrated amplifier is used a 2A 24W power supply unit minimum is required If the supply unit has insufficient power sound will be very bad and the power unit will heat up and eventually break down Waves System 4 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual 3 Installation 1 Amplified audio output 2 Line level audio output 3 Luminous indicator 4 Power supply 5 Infrared detector 6 Input contact 7 SD card connector 8 Secondary power supply 9 GPS extension 10 Input contact 11 Volume level setting 12 Option Serial link 13 Option S PDIF 14 Amplifier heat dissipation device to be added 15 GPS antenna input Memory card choose a good quality card of a minimum size of 64Mo New cards are usually formatted in FAT You can also us
11. cifying the legal use conditions This manual can t be reproduced or used in whole or in part in any form and by any mean for other use than private without the written permission from Waves System ID AL is a trademark of Waves System Waves System V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual WARNING DO NOT EXPOSE TO MOISTURE AND DUST Unplug the power cord before any intervention FOR YOUR SAFETY PLEASE READ CAREFULLY THIS OPERATION MANUAL BEFORE USING YOUR PLAYER A SAFETY INSTRUCTIONS A 1 CE marking The CE marking is on the ID plate at the back of the product It means this product complies with the low voltage CE directive according the EN 55022 standard and the EMC directive 61000 4 x A 2 Directives Electro magnetic compatibility EMC and low voltage directive requirements are satisfied A 3 Overview The user s manual forms an integral part of the unit It must be kept close to the unit Precise observance of these instructions is a pre condition to use the unit for the intended purpose and for its correct operation This user s manual must be passed on to any future purchaser or operator The staff would receive instructions concerning the correct use of the product Safety for the operator as well as trouble free operation of the unit is only ensured if use is made of original equipment parts Moreover use may only be made of those accessories that are specified
12. d of 3 or 4 figures followed by an optional file name Example 001 mp3 or 0011 my file mp3 or 0011 wav The first 3 figures define the main file number This number is the number called in the configuration file of GPS coordinates See related chapter The main file number is between 001 and 999 Each of the files to be broadcast in relation to a GPS position is identified by its main file number made of 3 figures between 001 and 999 These 3 meaningful digits may be followed or not by a chosen name Extensions mp3 or wav define the audio file format Waves System 9 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual For any one given GPS location it is possible to broadcast a series of audio files i e up to 10 files A sub number is then added to the main file number to specify the broadcast order of the messages The sub number is between 0 and 9 Example when the GeoPlayer reaches a given location you could broadcast an introduction jingle an information message an advert and an end jingle To achieve this scenario you need to create 4 files with the same main file number and 4 different sub numbers to define the sequence order in which the files will be played back 0010 introduction jingle mp3 0011 information message mp3 0012 advert wav 0013 end jingle mp3 The main file number is 001 The sub numbers are 0 to 3 Files are read in this order Every f
13. d provided it is used according to its purpose However for safety reasons we are obliged to point out the following measures Waves System 1 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual When operating this appliance observe all local rules and enforced regulations The homologation shall be invalid if any modification or alteration is made on the appliance Operating modified appliances may lead to a penal suit In the interest of the safety of work the manager and the operator will be responsible for respecting the instructions Retain all packing material in case the device must be shipped Take care that it does not fall into the hands of children Only the original packing guarantees optimal safety of the appliance during transport Should it be necessary to ship the product during the guarantee period Waves System will not accept claims for damage arising during the transport from using incorrect packing material This product is dedicated to broadcasting music It may only be operated by trained or knowledgeable personnel who can handle the device correctly Before every use the operator must check the functional safety and the condition of the appliance The operator must be knowledgeable in the operation of the appliance This device must not be used in places with potential explosion risk Moreover it must not be used in an environment favouring combustion neither in
14. dvise not to specify a too small tolerance to obtain a reliable trigger The maximum tolerance is 1000m 1km Waves System 11 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual Main file number for the triggered file One or several audio files are associated to each location The files to be broadcast are stored on the SD card in the GPS directory see chapter 4 for details File numbers are between 001 and 999 Several GPS locations may call the same audio file s it is possible to listen to the same message at different locations Trigger mode Depending on applications and vehicles the way audio files are triggered may vary Three trigger modes are available on the GeoPlayer 1 Track mode 2 Alarm mode 8 Free tour mode e 1 Track mode Use this mode to trigger the various positions one after the other in a defined sequential order Define the complete track and the sequence of selected positions The player is only watching one point ata time and will move to the next one once the current position has been triggered In this mode it is possible to pass twice by the same point at different times for example for return journeys or crossroads and play a different messages each time If a problem occurs a detour or no trigger for some reason it is possible to force trigger of a point manually by using the input contact of the player by connecting a push button for example e
15. e FAT32 format for SD card above 512Mo Push the card without forcing To remove push on the card to release it Caution the GeoPlayer does not have any on off switch The player is powered on as soon as it is plugged in The SD card must be inserted or removed when the GeoPlayer is NOT POWERED ON The amplifier heats up It is important to add a cooling device whose size must be in relation with the required power Waves System 5 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual 1 Speaker Output The GeoPlayer includes a built in amplifier The board can therefore be connected directly onto speakers Connect the speaker wires onto the output of each of the 2 channels Caution Never connect outputs between themselves do not create short circuits and do not use speakers with lower impedance than specified in the player specification Right speaker 2 Audio Output on the line level stereo output connect an amplifier sound system mixer or any device providing a line level input The 4 pins connector offers an internal connection link Left output Ground Ground Right output Stereo audio output on mini jack 3 5 3 Luminous indicator a red LED displays the status of the player LED on permanently no playback GPS connected LED on and flashing twice no playback GPS non connected LED flashes regularly reading GPS connected LED off and flashing twice reading G
16. er Ox Directory 0 is the default directory played on powering on the player e The letter defines the broadcast mode of the files in the directory xR R for random mode RND xS S for sort mode in sequenced order SORT Waves System 8 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual When choosing R files are played in random mode In random mode files names are free followed by extension mp3 for MP3 files and extension wav for WAVE files It is possible to mix both types of files in the same directory When choosing S files are played in a sequential order Sorting is in numerical order of the first 3 digits of file names Therefore files need to be numbered with 3 figures which can be or not followed by complementary characters For example 001 my song mp3 002 another song mp3 003 music wav 004 wav 250 another music mp3 In sequential order mode S non numbered files will be ignored amp 00i song ME 002 mp3 Caution 250 files maximum 003 wav Note in sequential mode SORT only numbered files will be Ej 158 mp3 read non numbered files will be ignored In random all files will be read If no file needs to be played on powering on do not create this directory 4 1 2 Directory GPS The GPS directory contains files to be broadcast in relation to the geographical positions of the GeoPlayer File names are compulsory and compose
17. evice has been exposed to drastic temperature fluctuation e g after transportation do not switch it on immediately The arising condensation water might damage your device Leave the device switched off until it has reached room temperature Do not shake the device Avoid brute force when installing or operating the device When choosing the installation spot please make sure that the device is not exposed to extreme heat moisture or dust There should not be any cables lying around for your own safety and that of bystand ers B PRODUCT INFORMATION B 1 Correct usage The player is designed for automatically broadcasting audio files Correct usage implies observation of the instructions in this manual as well as observing the require ments concerning installation B 2 Incorrect usage Any other use beyond this is considered as incorrect usage The manufacturer will not be liable for any damage resulting from incorrect usage The operator carries all risks B 3 CONTENT GeoPlayer audio board User manual B 4 TECHNICAL SPECIFICATION Audio Player MP3 and WAV Model GeoPlayer Nominal values for power supply 12V DC B 5 INSTALLATION The apparatus must be set up in a dry and dust free room Do not install the player too close to a wall To avoid overheating the ventilation holes must be kept clear and an air circulation gap must be left above the unit B 6 ELECTRICAL CONNECTION Before use compare mains voltage with
18. http www wsystem com Waves System V 1 0 2008
19. ies There are two categories of files 1 Files to be played on powering on the player and played back in loop 2 Files to be played on GPS position detection These 2 categories of files are represented by 2 directories or folders Naming of directories results in various playback options A configuration file gps csv must also be copied at the root of the SD card this file contains the various GPS positions and associated information see details in chapter 5 Example of use On powering on one or several files are played and loop background music for instance When GPS location is reached the looping files stop and the audio file associated to the GPS location is played after playing the triggered file the loop file is played again 4 1 Organization of the two directories Only one level of directory is allowed at the root of the memory card Two directories only are permitted Directory names are composed of 2 meaningful characters Exemple OR or 0S and GPS a 85 sp carb 13 Ej OR 3 GPs 4 1 1 Directory 0x Place in this directory audio files to be played in loop on powering on the player When the player is powered presence of this directory is checked If it is found all the files are played If it is not present on the SD card the player goes to standby mode and awaits for a GPS input The maximum number of files in this directory is 250 e The first digit 0 defines the directory numb
20. ile includes an optional name followed by the extension defining its format Both mp3 and wav files can be played Note Files are broadcast in sub numbers order but they do not have to be consecutive numbers 0012 mp3 0015 mp3 0018 mp3 The main file number is 001 The sub numbers are 2 5 8 Files will be read in this order Other example When a tourist train reaches each GPS location information are broadcast in various languages The sub numbers specifies the broadcast order of each language 0050 French mp3 0051 English mp3 0052 German mp3 The main file number is 005 The sub numbers are 0 1 2 Files will be read in this order Note the fourth number is only necessary if several files need to be broadcast Waves System 10 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual 5 GPS configuration file The GeoPlayer broadcasts audio files in relation to geographical locations The integrated GPS sensor permanently compares the player s position with a pre established table listing the points to be scrutenized The Global Positioning System known as GPS is presently the main international satellites positioning system It uses the geodesic system WGS 84 and is based on calculation of the distance between the sensor and several satellites Data necessary to calculate position of 31 satellites are regularly transmitted to the sensor which is able to work out the coordinate
21. nnector a GPS sensor is fitted on the connector to allow automated broadcast of audio information in relation to the geographical positioning coordinates 11 Volume setting volume setting is provided by connecting 2 push buttons on the VOL connector Adjust volume by pressing Volume and Volume buttons Volume button Ground G G Volume button 12 Option connector for serial link for future extensions On request 13 S PDIF connector To provide a digital audio S PDIF output On request 14 Amplifier The amplifier heats up and it is important to add a cooling device The size of the device must be proportional to the desired power the wall of the case a piece of metal or a purchased cooling device can be used 15 GPS antenna input Both passive and active antennas can be used to receive satellite s signals Acitve antennas are more sensitive MMCX type connector is required A magnetic active antenna is available as an option It can be placed on the vehicle roof Simply connect the cable onto the connecteur on the GeoPlayer Waves System 2 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual 4 Operating the player and naming of files The GeoPlayer reads files and playback instructions stored on the SD memory card No extra software is required to configure the player Playback options are provided by the way files are named and organized in the director
22. opy these coordinates into the table and proceed the same way for the other locations to be identified Web Images Maps Actualit s Vid o Messagerie plus Mon profil Aide Historique Web Mon compte D connexion Itin raires _ R sultats Mes cartes Imprimer C3 Envoyer ee Obtenir l URL de cette vage 3 ri ra 9 De 47 164093 1 681080 6 Infrared remote control The GeoPlayer includes an infrared sensor and can therefore be controlled by a remote control handset An ID AL remote is available as an option This remote controls the following functions Transport bar Play Stop Next Previous Volume control Increase or decrease volume Trigger key Play the next GPS position when the GeoPlayer is in track mode same as Input contact function Waves System 15 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual Appendix A Characteristics Power supply Nominal voltage 12V DC Power supply range 10V to 15V DC Consumption on 12V power supply Stand by 100mA Reading line level output amplified output not used 130mA Reading amplifier maximum 8Ohms 2A varies with volume level Output audio power Voltage 12V THD 10 Charge 8 Ohms 2 x 7W Voltage 12V THD 0 5 Charge 8 Ohms 2 x 5W Dimensions Width 70mm Height 18mm Depth without connectors 67mm Depth with connectors 80mm Weight
23. s Each point of interest is identified by the following data Latitude Longitude Tolerance around the point Main number of the triggered file Trigger mode Maximum number of files 150 Latitude et longitude Latitude and longitude are the coordinates of a desired trigger point They can be obtained using a GPS device a software such as Route 66 or via internet services such as GoogleMaps Several formats are used to indicate latitudes and longitudes The most common are degrees minutes seconds decimal DMSd often used in mobile GPS devices degrees decimal Dd often used in cartography software The GeoPlayer uses the degrees decimal Dd format Tolerance For each point a tolerance expressed in metres can be specified This tolerance forms a square around the point and its choice is very important The tolerance depends on the moving speed and on the size of the detection area If the area is too small there is a risk of not triggering the point If it is too large the audio file could be triggered too early It is important to understand that the GPS sensor updates its coordinates every second At high speed a big distance is covered in one second Example On foot about 5km h which is 1m s Slow vehicle at 20km h which is 6m s Fast vehicle at 60km h which is 17m s Very fast vehicle at 100km h which is 28m s The precision of the GPS sensor is about 5 m Nevetheless we a
24. that specified on model plate Waves System 3 V 1 0 2008 ID AL GeoPlayer MP3 and WAV Player with GPS function Manual 1 Product presentation The GeoPlayer is an audio player which reads MP3 and WAV files stored on a SD memory card Playback of audio files is triggered by global positioning coordinates recorded by the integrated GPS sensor The GeoPlayer can read files in loop automatically on powering on at any time broadcast of background audio can be interrupted to play a file when a identified geographical position is reached Through the integrated GPS sensor the GeoPlayer compares its current position with the positions listed in a correlation table When they match the GeoPlayer plays the audio file s associated to the position The GeoPlayer offers interactive GPS broadcast for tourist vehicles such as trains buses boats 2 Functionnalities Geopositioning and interactivity The GeoPlayer broadcasts audio files in relation to GPS positions Three trigger modes are available Track mode Alarm and Free Tour mode Autoplay This function is available on the GeoPlayer the player will automatically start playing the selected files on powering on Broadcast mode The way files are organized and named on the SD card defines the broadcast mode Directory and file names provide powerful automation of playback patterns Updating By removing the SD card from the player to transfer updates using a card re
Download Pdf Manuals
Related Search