Instruction Manual
Contents
1. Single and Combined Keys When a single key is pressed the PTZ camera will respond with the corresponding action Single key operations include NEAR FAR TELE WIDE OPEN CLOSE AUTO and Joystick Combined key operators involve 2 or more keys or a key and knob to have the PTZ camera respond with the corresponding action Combined key operations include PRESET PATTERN PATROL SHOT RUN TOUR CAM AUX ON AUX OFF 5 4 Keyboard Operations PTZ Mode and Choosing PTZ Address To enter PTZ mode If the LCD screen displays 2 it indicates the keyboard is working in PTZ mode If not press to return to PTZ mode To choose a PTZ address Enter the PTZ mode and input the PTZ address number to control then press the CAM key For example for address 28 press 2 8 and the LCD will display 2 007 28 Then press CAM key and the LCD will display PTZ 028 5 5 Keyboard Operations Set and Recall Pattern Scan To setup a pattern scan Choose the address for the pattern scan Then press for seconds PATTERN key The LCD will display PATTERN RECORD Use the joystick and control knob to position the camera zoom adjust the lens etc After setup is complete press the PATTERN key to end setup The LCD will display PATTERN STOP To recall a pattern scan Press the RUN key The LCD will display RN PATTERN NO Note In PELCOD there is only one pattern The PTZ camera will operate per the first pattern2. SECURI THE IMAGE OF QUALITY USER MANUAL ST PTZ KB PTZ Keyboard Controller v1 0 8 5 11 1 TABLE OF CONTENTS PACKAGE CONTENTS ccevesnssvesaunanssaserssselsessvenseseicesceesssssseuacs 3 PRODUCT DESCRIPTION 3 SPECIFICATION S ccteuctereace scan sacveneccesscusuceusevaesseecucueesevsncvassncss onsaaeseacuenaesousesnesscosevecsresetee 3 INSTALLATION AND OPERATION iicccsccccscncescavcevdentecwreverstsvavscevessseseusmsonnrenevenvenssasesacesesese 4 1 UNPACKING and HANDLING wicsvcsiccsscasnsetvesvecuanshsissuscnnanesensnanunsavadeussivsiuessausneaniesusunnadeeisthnusinasusevsnnsbnenivniesst 4 MECHANICALINSPECITION ETE 4 ALDEN TAQ IN aa a 4 A WHERING CONNEC TIONG EEEa E 4 KEYBOARD OPERA 6 5 1 Keyboard Controller Function 6 5 2 JOystick Operation Knob Control c ccscssssssscsssscsessssesssssssessssesssssssesscsessssscscsssessssessesassecsssessssassesanscsesassassesasess 7 5 3 Keyboard Operations Single Combi
3. SET PW Move the joystick operation knob upwards the LCD will display gt LOCK SET Press Gs and the LCD will display LOCK OFF This indicates status of key lock Move the joystick operation knob upwards and the LCD will display gt LOCK ON Press 65 and the LCD will display LOCK PW Input a 4 digit password press aA and the LCD will display gt LOCK SET Press 2 times exit Setup and return to normal mode To access a locked keyboard controller with Password In normal mode press two times The LCD will display LOCKED PW 8 Input the 4 digit password press keyboard is locked Press any key and the LCD will display OPEN LOCK Input password press the keyboard controller will be unlocked v1 0 8 5 11 11 6 3 Keyboard Controller Parameter Setup Framework gt PTZ Setup gt Address gt 0 254 gt SYSTEM Setup gt Set PW J o NewPW Again PW gt Sound Set gt Lock Set 5 enter a password 7 TROUBLESHOOTING TIPS a The ST PTZ KB is not controlling the camera or other device at all i be sure the R485 connections between the ST PTZ KB and the camera are using the same polarities ii be sure correct connections are made at the ST PTZ KB s connection block ili check to see if the correct baud rate has been set with the camera iv check to see if the correct protocol has been with the camera Note if the
4. The LCD will display PTZ XXX PATTERN single key operation will stop the pattern scan and return the controller to normal status 5 6 Keyboard Operations Set and Recall Tour To setup a tour Choose the PTZ camera s address then press the appropriate number key s the PATROL key v1 0 8 5 11 g set up the first tour press 1 then PATROL The LCD will display NO 1 001 indicating setting the first preset point of No 1 Tour Move the joystick operation knob to choose the preset point to be added to the tour Move joystick operation knob downwards and the LCD will display NO 1 PRESET 007 indicating the first preset added to the first tour next setting is for dwell time Move the joystick operation knob left or right to change the dwell time for the present preset point The LCD will display 001 TIME 003 Move the joystick operation knob downwards and the LCD will display 007 TIME 003 indicating the time of the first preset point is 3 seconds set the speed setting camera move time from one preset point to another move the joystick operation knob right and the LCD will display 001 SPEED 01 Now move the joystick operation knob left or right to change the speed from one preset point to another Move the joystick operation knob down and the LCD will display NO 1 PRESET 002 Repeat the above steps until the tour setup is completed When setup is completed
5. some special functions are Run Tour Auto Number Keys 0 9 Cam Basic Function Keys Near Far Tele Wide Open Close achieved via recalling a preset e g recall camera menu recall integrated menu pattern patrol pattern scan linear scan etc Recall the stored PATTERN This key should be used together with a number key RUN PTZ camera patrol according to settings in camera memory This key should be used with a number key Automatically starts left right scan Number keys 0 1 2 3 4 5 6 7 8 9 Address selection key Select decoder address PTZ address Manual focus on a close object Manual focus on a distant object Zoom in lens on object enlarge object Zoom out lens on object widen the field of view Manually increase the lens aperture to lighten the image Manually decrease the lens aperture to darken the image All key operations are displayed on the LCD screen The LCD will switch to low power mode if the controller does not receive any input for more than 30 seconds The screen will also return to its initial state 5 2 Joystick Operation Knob Control When Controlling the PTZ Camera Output Output Output Output 9 9 9 oe wow When Setting Up the Keyboard Controller Output Output Output Output Menu Menu Parameter Parameter turned up turned down of the left of the right v1 0 8 5 11 When Controlling PTZ Camera Menu 5 3 Keyboard Operations
6. up to 255 PTZ enabled CCTV cameras and other devices The unit uses RS 485 communications includes an LCD display and a 3 axis joystick Single key protocol and baud rate retrieval of a current control address is an innovative feature Important Note PTZ controllers are designed to perform a wide variety of PTZ camera control functions However the utility of any PTZ controller is highly dependant upon the particular PTZ camera to be controlled as each camera has not only its own functions but specific methods of how those native functions are accessed and managed Further a particular PTZ controller s terminology may differ from that used by a particular PTZ camera Therefore it will be necessary for the installer and or user to consult BOTH the PTZ controller and PTZ camera s user manuals to ensure proper set up configuration and application SPECIFICATIONS ST PTZ KB Specifications Typical v1 0 8 5 11 3 INSTALLATION AND OPERATION 1 UNPACKING and HANDLING Each unit is shipped assembled and factory tested Ensure that all accessories are removed from the container before discarding packing material MECHANICAL INSPECTION Inspect the front and rear of the equipment for shipping damage Make sure the equipment is clean and no connectors are broken damaged or loose If equipment appears to be damaged or defective please contact your distributor or Securitytronix at 1 610 429 1511 for assistance 3 SPECIAL ATTEN
7. 2A power supply to the ST PTZ KB s power connector v1 0 8 5 11 5 5 KEYBOARD OPERATION 5 1 Keyboard Controller Function Keys Preset Aux off PTZ Camera Setup and Recall Keys Function Keys A PTZ Setup and Recall Keys Preset Pattern Patrol Aux On Aux Off Shot v1 0 8 5 11 J Basic Function Keys Shot Tour mejan HOO lt 2 hep Ea Address Selection Keys Back to previous menu and escape Press for 3 seconds to set up key parameters and enter Display the protocol and baud rate of the current address Preset the original position of the PTZ camera This key should be used together with a number key Start Esc to pattern record Press for 3 seconds to record pattern then press for 3 seconds again to end record pattern This key should be used together with the control knob or function key Start Esc to patrol record Press to enter patrol set and press again to exit patrol set This key should be used together with the control knob or function key Turn auxiliary function on This key should be used together with a number key Note the auxiliary function will vary by camera vendor and model Turn auxiliary function off This key should be used together with a number key Note the auxiliary function will vary by camera vendor and model Recall the PTZ camera s preset position This key should be used with a number key Note
8. LCD will display SETUP SUCCESS After setup is completed press 3 times to return to normal mode Note to set the same protocol and baud rate for a PTZ camera enter this screen ADDRESS 0 254 Then set protocol and baud rate v1 0 8 5 11 10 6 2 Keyboard Controller System Parameter Setup System parameters include password restoration of default settings key tone On Off key ID setup keylock etc To restore default settings normal mode press Gs for 3 seconds The LCD will display PASSWORD Input the password default is 8888 and press 6 The LCD will then display gt 2 SETUP Move the joystick operation knob downwards The LCD will display gt SYSTEM SETUP Press and the LCD will display gt 5 PW Move joystick operation knob downwards the LCD will display gt DEFAULT Press and the LCD will display SURE Press 55 again and the buzzer will sound with the LCD displaying SETUP SUCCESS for 1 second To abort the set default setting process press 2 times to return to normal mode To set keyboard controller lock On Off with Password normal mode press Gs the password default is 8888 press for 3 seconds The LCD will display PASSWORD 5 and the LCD will display gt PTZ SETUP Move joystick operation knob downwards for the LCD to display gt SYSTEM SETUP Press Gs and the LCD will display gt
9. T R LED flickers the keyboard controller is free of problems If the T R LED does not flicker when communicating the RS485 port may be defective b The ST PTZ KB is communicating with the camera but certain functions do not work PTZ controllers are designed to perform a wide variety of PTZ camera control functions However the utility of any PTZ controller is highly dependant upon the particular PTZ camera to be controlled as each camera has not only its own functions but specific methods of how those native functions are accessed and managed Further a particular PTZ controller s terminology may differ from that used by a particular PTZ camera Therefore it will be necessary for the installer and or user to consult BOTH the PTZ controller and PTZ camera s user manuals to ensure proper set up configuration and application c Several PTZ cameras respond simultaneously from a single keyboard controller operation check to see if the cameras are all using the same addresses If so assign a unique address to each device Forgot key lock password In any status press Gs until the system setting menu appears then reset the password e Additional troubleshooting assistance can be found on line at www securitytronix com in addition to support from Securitytronix sales engineers at 1 610 429 1511 v1 0 8 5 11 12
10. TION a The installer must comply with electrical safety standards There must be sufficient space between the ST PTZ KB s communication and power lines and camera s and power supplies and video lines and any high voltage equipment and or cables Do not open up or dismantle the ST PTZ KB s case There are no serviceable parts inside the unit Do not install ST PTZ KB in an environment where the temperature is below 14 F or above 131 F Do not install the ST PTZ KB in a damp environment Only use a dry cloth to clean the unit If there is dirt that is difficult to remove wipe gently with a mild detergent Never use strong or abrasive detergents A minimum 12VDC 2A power supply must be used AC power cannot be applied Using an AC or other incorrect power supply will damage the unit Only qualified installers are allowed to install and test the ST PTZ KB As the ST PTZ KB is a sensitive device any shock or collision to the unit or shaking of the unit will cause damage and void the warranty The unit s LCD display is fragile Do not crush or expose under strong sunlight for extended time As the unit s joystick operation knob is fragile the ST PTZ KB must be packed in its original packing material when shipping to another location or returning it for repair 4 WIRING CONNECTIONS v1 0 8 5 11 RS485 port Tb 2 PTZ AUX Slave keyboard controller input Ra Rb to Tb on slave Communications cab
11. _oress the PATROL key the LCD will display SAVE PATROL SET Press to save settings in memory or press to escape without saving and return to the previous menu To recall a tour Press the appropriate tour number followed by the TOUR key For example for the first tour press 1 then TOUR and the LCD will display PTZ 001 PATROL single key operation will exit tour and place the controller into normal status Note the following when setting up and recalling a tour Left and right movement of the joystick operation knob selects the value for a function Downward movement of the joystick operation knob selects enter and moves to the next function Inthe setup process exits setup 5 7 Keyboard Operations Set and Recall Preset Points To set preset points Choose the PTZ camera s address Using the joystick operation knob move the camera to the desired preset point Zoom the lens if required to the specific position Press the preset point number to set followed by the PRESET key For example for preset position number 6 press 6 and PRESET The LCD will display PRESET 6 Repeat the above steps to create additional presets To recall a preset Press the appropriate number key for the desired preset point then press the SHOT key For example to recall preset point number 6 press the 6 key followed by the SHOT key and the LCD will display SHOT 6 v1 0 8 5 11 9 5 8 Keyboard O
12. le ground T R PTZ indicator Display output status Flicker and Green Always on Red DC 12V DC power input DC power input Secondary Control Equipment Ta Tb Keyboard controller of the 4 legs of Keyboard controller of the 3 legs of lt Rb access control equipment Tb Ra access control equipment Ta RS465 GXPORT TR PW 2 io Gnn DC 12V PTZ camera s RS485 connection 4 PTZ camera s RS485 connection Keyboard controller leg Ta leg 1 Keyboard controller leg Tb leg 2 Pma R R T 4 rm i 1 3 N 1 lt T s a a A control cable e g unshielded twisted pair UTP is connected between the ST PTZ KB s RS485 Ta and RS485 Tb connectors pin positions 1 and 2 to the PTZ camera s RS485 port Be sure the polarities of the keyboard and camera s RS485 connections are consistent If multiple PTZ cameras are to be controlled use a control cable to daisy chain one PTZ camera to the other Again ensure the RS485 control cable polarities interconnecting the cameras are consistent b If a secondary device e g DVR is to be controlled using the ST PTZ KB use a control cable to connect the device s RS485 port Ra to the keyboard s PTZ AUX RS485 port Ta pin position Repeat the cable connection between the devices RS485 port Rb to the keyboard s PTZ AUX RS485 port Tb pin position 4 c Connect the 12VDC
13. ned 8 5 4 Keyboard Operations PTZ Mode and Choosing PTZ 8 5 5 Keyboard Operations Set and Recall Pattern 8 5 6 Keyboard Operations Set Recall OUF c csssssssssssssssssssssssssessssssessssessessssessssessessssessesessssassssssasess 8 5 7 Keyboard Operations Set and Recall Preset Points 9 5 8 Keyboard Operations Turn On Off 10 6 SETTING KEYBOARD 10 6 1 Setting Controller Protocol ANd Baud 10 6 2 Keyboard Controller System 11 6 3 Keyboard Controller Parameter Setup 12 Za TROUBLESHOOTING csc ass esses vere te ccc cen estpncmecnacenentiasnemntien cecuuniscaeesccupsaasascueseneedienschaceaseeenaneusaeecs 12 v1 0 8 5 11 2 PACKAGE CONTENTS This package contains One ST PTZ KB keyboard controller One 5 pin Isobar plug One 12VDC 2A power supply One user manual PRODUCT DESCRIPTION The ST PTZ KB is a professional grade pan tilt Zoom PTZ controller for
14. perations Turn On Off Auxiliary To turn auxiliary on Choose the address of the PTZ camera or other device to be turned Press the appropriate number key s for the device followed by the AUX ON key For example to turn on device number 1 press the 1 key then the AUX ON key To turn auxiliary off Press the appropriate number key s for the appropriate device followed by the AUX OFF key For example to turn off device number 1 press the 1 key then the AUX OFF key 6 SETTING KEYBOARD PARAMETERS 6 1 Setting Controller Protocol and Baud Rate normal mode press Gs for 3 seconds The LCD will display PASSWORD Input the password The default password is 8888 Then press e and the LCD will display gt 2 SETUP Press a and the LCD will display gt ADDRESS_ 001 Using the number key s enter the appropriate numbers for the desired device then press and the LCD will display PROTOCOL PELCOD To change the protocol from Pelco D to Pelco P move the joystick operation knob leftwards and the LCD will display PROTOCOL PELCOP Press 5 and the keyboard buzzer will sound The LCD will display SETUP SUCCESS Move the joystick operation knob downwards and the LCD will display BAUD RATE 2400 change the baud rate e g to 9600 move the joystick operation knob rightwards to select the desired baud rate The LCD will display BAUD RATE 9600 and the keyboard buzzer will sound The
Download Pdf Manuals
Related Search