K1 GSM SOS Call User Manual V1.0
Contents
1. GSM SOS Call System GSM Senior Telecare An Advanced Programmable Multifunctional GSM SOS Call Panel GSM Senior Telecare In The Worldwide User Manual A a 0 Date Issued 2014 12 01 All rights reserved Ki CSM Senior Telecare GSM SOS Call System gt Brief introduction The K1 GSM SOS Call is a brevity fashion and neat design it is special for emergency call out for help It is suitable for senior elderly disabled people or community area public area for emergency call The GSM Emergency Call equips one big SOS button it can be easy to push it to ask for help and create two way voice communications The GSM Emergency Call inbuilt industrial gsm module inside it is 850 900 1800 1900Mhz can work at all gsm networks in the worldwide The GSM Emergency Call inbuilt rechargeable battery inside to ensure it can work at any time Moreover the user can setup after push the button does it send out SMS to alert or not or allows only authorized person can call in or every person can call it to create two way voice communication gt Installation Important Make sure to switch off K1 Panel before inserting or removing your SIM card 1 Atthe backside of the panel please remove the cover and you can see the SIMCard holder 2 Contact the 5VDC to the Panel the AC DC Adaptor is 5VDC1A then turn on it by the switch 3 Adjust the voice volume press the up button to increase the voice volume press th2. e down button to reduce the voice volume Default is Level 3 total is 5 levels See above mentioned photo 4 Reset to factory default settings press the Reset Button and turn on the K1 about 3 seconds the left power LED will turn on 1 second and flick 3 times stands for reset successful See above mentioned photo 5 The is the GSM Signal LED quickly flicks stands for registering network slowly flicks stands for registered successful ee kt Ki CSM Senior Telecare GSmM SOS Call System gt Settings The user can program it by SMS Commands 1 The default Password is 1234 2 All the settings are through SMS commands please edit the below SMS commands in your cell phone then send to the K1 Panel The K1 Panel cannot support PIN Code Protected S MCard 3 Remember that commands must be CAPITAL LETTERS It is PWD not pwd CAP not Cap etc Don t add spaces or any other character 4 The pwd in the commands is means the password when you use it please in stand of it by the digital number 5 Ifthe command is incorrect the K1 Panel will return SMS Format Error Please check Caps Lock in Command f the password incorrect will not return any SMS 6 The SMS commands that you will certainly use in the K1 Panel are the following 1 Setup the Language If setup successful will return English 2 Setup New Password if successful the unit will return new password This is the New Password p
3. h to change it or removed it by SMS Command 8 Setup send SMS message to the 1 3 alarm numbers E g 1234B1 Mum ask for help SMS text max is 40 characters After the K1 received the command will return When Push Button Send SMS to 1 3 Numbers And when push the button will send out Mum ask for help to the 1 3 alarm numbers then start to dial these numbers one by one 6 Setup not send SMS message to the 1 3 alarm numbers Please noted double at the end of this command If setup successful will return the SMS Alarm Content B is the identification character of this command 7 Inquiry the SMS Setting If setup successful will return the setting results gt Operation In standby mode Push the SOS button will call the 1 3 alarm numbers one by one till any one answer or dial 3 cycles In two way voice communication status push the button will hang up lf call to the K1 the Panel will automatically pick up the incoming according to 3 and 4 settings When the external power goes off more than 30 minutes will send to the 1 3 alarm numbers When the External Power Goes ON then will send ee a E
4. lease remember it carefully The password is 4digits For example the original password is 1234 you want change it to 6666 please send the SMS below 1234P6666 3 Allows all number call in to create two way voice communication Default lf setup successful will return Allows all numbers call in 4 Allows only white list can call in pwd successful will return Only authorized numbers can call in at this condition the 10 white list numbers call in and after 1 3 rings the K1 will automatically pick up and create two way voice communication the other number call in will be rejected directly 5 Setup white list number Serial Number 1 10 The 1 3 is the alarm number when push the SOS button will automatically dial these numbers one by one till any one answer the call or dial 3 cycles A is the identification character of this command Telephone Number authorized number max 21 characters please try to include country code or rs a e kf Ki CSM Senior Telecare G9mM SOS Call System remove country code if cannot work properly E g 12341A0086135000011114 This is to setup number 1 telephone and the country code is 0086 phone number is 138500001111 After received will return SMS to confirm 6 Inquiry the white list number After received this command the K1 Panel will return the SMS to confirm 7 Remove the white list Number Please overwrite it with another number that you wis
Download Pdf Manuals
Related Search