Home

Utility Manualtotalv32 - shining

Contents

1. Complete Hard Drive Setup MacOS 9 x K It is important to note that this utility will erase all data from your hard drive and that the data is not recoverable Great caution must be taken and only technically trained IT personnel should use this utility Always make sure all your data is backed up and verified before making any attempts to change your hard drive setup All information and instructions provided in this section are designed for technical personnel only Technical terminologies used in this section are based on the assumption that the operator of this Copyright Shining Technology 2001 2002 33 shining Utilities Installation and Instruction Manual utility has a clear understanding of their meanings and implications No further explanations of these technical terminologies are included in this document Introduction In order for a hard drive to be recognized and used by the operating system it must be prepared in certain ways prior to its being operational There are two main steps in preparing a hard drive 1 Create a partition 2 Format the partition and place a file system on it Shining s Hard Drive Setup utility is designed for simple hard drive partitioning only This utility does not support resizing merging or converting partitions from one type to another This utility also will not repair any damaged partition If a more sophisticated portioning scheme is required please use another hard drive partition prod
2. User can invoke Extension Manager inside Control Panel and make certain the File Exchange box is crosschecked Copyright Shining Technology 2001 2002 34 shining Utilities Installation and Instruction Manual Partition Type Once the proper partition schema is determined and selected a hard drive can be partitioned to the following partition types e Standard This is the old 16 bit that was used with low drive capacity for system from 6 to 7 6 1 It is also known as HFS Extended The Extended File system was first introduced in Mac OS 8 1 It addresses the HFS size limitations e File Exchange DOS Windows compatible partitions from Windows 95 98 2000 XP Limit on Number of Total Partitions Please note that this application allows only a maximum of 8 partitions to be created ina drive It was done this way to be compatible with Apple s Drive set up Partitioning Rules There is no maximum of partitions that we are aware of The partitioning application sets the limit We don t know of any limitation by Apple about how many volumes can be mounted on the desktop Using the Shining Drive Setup Since all Mac OS systems come with a Drive Setup application why does one need the shining Drive Setup In classic Mac OS System 9 the Apple application does not support external and third party drives The Shining Drive Setup lets you partition drives in Shining enclosures The Shining Drive Setup ap
3. Warning Stopping the Dy Disk process will not recover any dota On this drive H the process is stopped the drive must be reparttioned and reformated before it can be used bry the system Copyright Shining Technology 2001 2002 18 shining Utilities Installation and Instruction Manual Now the partitioning and formatting process is complete Create DY Disk Refresh Drive 38 162 MB Primary FAT32 38 162 MB Drive 19 618 MB Primary FAT32 19 618 MB Bootable Drive 19 469 MB Primary FAT1 2 047 MB Extended DYDisk preparation complete Logical FEZ Use FS key to refresh drive information e g My Computer Press OF to continue REE Primary FA If the drive selected is partitioned and or is formatted the program shall erase it clean and re create a new partition and re format it as one single partition one single FAT32 volume for you Click OK to continue Click Cancel to go back to main menu A drive icon will be displayed in My Computer and Movie folder Media folder and Project file are now created The hard disk drive is now ready to use a regular Firewire Hard Disk Or click EJ Plug N Play icon at bottom right corner on desktop and eject the drive by selecting it Stop Shining Technology Inc Shining CitiDISK DY IEEE 1394 5BP2 Device DrivetI Stop Shining Technology Inc Shining ATA ATAPI Devices IEEE 1394 SBP Device BrivesfH Gi Now the CitiDIS
4. all the new partitions will be ready to format and be used by the OS At any given time prior to finishing the setup process by clicking on the Commit All Changes button you can abort the partition operation and have no change to your hard drive by clicking on the Cancel button 8 After the system is rebooted the Hard Drive Setup utility will automatically re start From the Main Menu select each of the newly created partitions and format each of them 9 Follow the on screen prompt to format each partition After the formatting is completed exit the utility The new drive is ready to be used by the Operating System Deleting and Redefining Partitions 4 When using the Hard Drive Setup utility existing partitions of a hard drive must be deleted all data on the drive will be erased prior to re defining the new setting User must back up all data in advance if you would like to preserve it for future restoration Your only other option is to use another partition utility application available in the market e g Partition Magic Using Shining s Hard Drive Setup utility to delete partitions from a hard drive is very simple managed by an easy to understand graphical interface One rule always applies while trying to delete partitions You must delete the Logical Partitions prior to deleting the any Extended Partitions Follow the steps below to delete Logical Partitions 1 From the Main Menu single click on Hard Drive S
5. shining Utilities Installation and Instruction Manual Chapter 3 0 Installation and Usage for Windows Introduction Windows Welcome to the Shining Utilities suite of applications and functions This utility suite is designed to enhance Shining Technology products This software suite may work with other devices installed in the computer however it is important to note that it is developed solely for working with the Shining Technology product Un predicable results or data loss may occur if any of these utility functions are used in conjunction with non Shining products Shining Installation Disc Opening screen The features include e Install Uninstall Drivers let user install necessary driver for the hardware e Install Utilities let user install the utility functions such as Hard Drive Setup HD Icon Setup Diagnostic and etc e Install Firmware Uploader let user install the unit specific firmware the CPU s software running inside the unit uploader so as to upgrade the unit functionalities View Readme File let user browse through information about the product e Visit Shining Technology on the Web System Requirements Windows Version 7 x of Shining Utilities is designed for supporting PC platform only For Mac support please contact Shining Technology or visit the Web site for more information Shining Utilities has been tested under all current CPUs and clock sp
6. volume names 5 gt HFSPlus HFS WINDOWS Partitioning 1 Partition F Total capacity 16 63 66 volumet Yolume Info _ Mame HFSPlus Type Mac 05 Extended bd HFS Size 6 21 6 21 W HOOWS Select a partitioning scheme a file system type and enter the volume name and size This is where the user can specify the partitions size and name of each partition The limit on the partition count is 8 The pop up menu near the Size entry box can be used to specify the display units MB GB or The application first attempts to display in the units that make sense as MB for low capacity and as GB for high capacity media The up and down arrow keys can be used to move between the volumes displayed in the Volumes group box The info of a selected volume is displayed in the Volume Info group box The Edit menu is enabled only when in this view The only other menu item that is supported at this time is the Quit Copyright Shining Technology 2001 2002 36 shining Utilities Installation and Instruction Manual The third Initialize window shows the last step to take before the drive is partitioned Clicking the Initialize at this stage means the data will be lost Shining Drive Setup Initialize Data on the following volumes will be destroyed HFSP lus HFS HINOOWS Default partitioning scheme 3 partitions Default initialization options None Custom Set
7. and then deletes it An error message will be C Super Long Test displayed if you try to write to a CD or a write protected drive Diagnostic screen The length of the test depends of how many Bytes are written to the drive You may choose a longer test if you have doubts about the drive in question Below is an example of what you might see at the end of a short test Copyright Shining Technology 2001 2002 27 shining Utilities Installation and Instruction Manual qt Diagnostics x J Compare fr Short Test Test How Stop Test C Medium Test 6 Long Test This test 15 harmless It simply creates i Very Long Test a small file reads it back tn and then deletes it An error message will be Super Long Test displayed if you try to write to a CD or a wite protected drive Drive Tested le Result OK Wrote File Successfully Drive c is writeable Start Time 172772001 4 38 07 PH Current Time 172772001 4 38 39 PH Iterationitt fi Og Bytes Written fi 030200 Diagnostic Short Test result screen If you have chosen a long test and wish to end it sooner click on the button marked Stop Test Operating System Detection Windows At the lower middle part of the Main menu there is Operating System O S detection and report information area This information should confirm the type of O S that Shining Utilities is running on This is important to confirm matches to the O S you believe you are runnin
8. automatically when the CD is inserted If it did not start please follow the steps below to begin installing the program 1 Insert Shining Macintosh Utilities CD into your CD drive Double click the CD drive icon 2 Ifthe start up program still does not start run it by double clicking on the file named Setup on the CD 3 Follow any installation prompts to install the utilities 4 During the installation process the install program may update some files on your computer When prompted for file replacement always keep the latest version of your files 5 To un install the utilities Locate the Shining Utilities folder Commad R the alias on desktop and delete it There are no preference files to delete Using Shining Utilities MacOS 9 x Shining Macintosh Utilities will perform only under the classic Mac OS System 9 mk After successfully installing the Shining Utilities you will see an alias Shining Drive Seto 13 on the desktop Double clicking it will launch the opening screen shown in figure 19 1 Opening Screen which is the main menu for all the utilities Check the center bottom slot to be certain that the utilities detected the proper OS for your system If the OS version Copyright Shining Technology 2001 2002 30 shining Utilities Installation and Instruction Manual displayed does not match what you know your OS to be Shining Technology recommends not running the software any further Click o
9. no refund policy for any purchase of the SOFTWARE 2 OWNERSHIP The SOFTWARE is owned and copyrighted by Shining Technology Your license confers no title or ownership in the SOFTWARE and should not be construed as a sale of any right in the SOFTWARE 3 COPYRIGHT The SOFTWARE is protected by United States copyright law and international treaty provisions You acknowledge that full ownership rights to the SOFTWARE will remain the exclusive property of Shining Technology and that no title to the intellectual property in the SOFTWARE is transferred to you You agree that any copies of the SOFTWARE will contain the same proprietary notices which appear on and in the SOFTWARE 4 REVERSE ENGINEERING You agree that you will not attempt to reverse compile modify translate or disassemble the SOFTWARE in whole or in part Shining Technology disclaims all warranties of any kind if the software was altered in any way by anyone other than Shining Technology 5 NO OTHER WARRANTIES Shining Technology DOES NOT WARRANT THAT THE SOFTWARE IS ERROR FREE Shining Technology disclaims all other warranties with respect to the SOFTWARE expressed or implied including but not limited to implied warranties of merchantability for a particular purpose and non infringement of third party rights Some jurisdictions do not allow the exclusion of implied warranties or limitations on how long an implied warranty may last or the exclusion or limitation of incidental or con
10. to check that your restored file is intact DiskCopy Windows DiskCopy provides a simple tool for the user to make copies of an entire drive s contents or duplicates of removable media To use this utility you must make sure the destination of copied data has equal or larger storage space than the source location In addition to making a disk or media copy DiskCopy also allows the user to select groups of files for copying However all selected files must be under the same root or top level directory and be copied as a set of data No individual files can be deselected or exempted from copying 4 x Cancel Ez Copy Disk Copy Entire Disk Drive From Se To Se Copy Drive Now Copy Directory Tree Copy From Directory Copy Directory Tree How r Progress Current File sheld DiskCopy main screen Copy Entire Disk Drive The DiskCopy function is an easy way to simply transfer all the contents files and file directory structure of one drive to another The current version of the DiskCopy utility does not have the ability to write to a CD even though you will see a CD Drive available To copy files to a CD click on our CD CDRW Utility button to access your CD recording program currently installed Shining s DiskCopy utility overcomes the Microsoft 32MB maximum capacity disk copy limit and will support all removable media of virtually any size DiskCopy also will allow copying t
11. to make any change to this particular drive Depending on how many hard drives you have installed in the system and how each drive was partitioned the startup screen of the program may look a bit different from the example below Copyright Shining Technology 2001 2002 24 shining Utilities Installation and Instruction Manual mi Dive Management Delete mL Details Commit All Changes Cancel Drive 3 910 MB Primary FAT32 3 899 MB Active Available li MB Drive 2 055 MB Primary FAT32 502 MB Extended 251 MB Logical FAT16 251 MB Primary FAT32 502 MB Extended 800 MB Logical FAT32 502 MB Available 298 MB Creating a new partition Simple rules must be followed when creating partitions According to Microsoft OS requirements a hard drive can be partitioned with any combination of types and sizes provided the following rules are observed 1 Only one Primary Partition can be set as active bootable 2 A total of four physical partitions can be created under the support of the OS However they can be any combinations of Primary and Extended Please note that Extended Partitions cannot be used as bootable partitions 3 Logical Partitions can only be created within an Extended Partition Technically speaking there is no limit on the number of Logical Partitions that can be created Since the maximum drive letters that Microsoft OS can support is 26 A to Z drive letter availability must be taken into considera
12. you can always change the Drive Letter assignment with exception to the boot drive or partition All drive letters are initially assigned by the system The OS does follow a unique scheme for this process The basic rule is as follows Copyright Shining Technology 2001 2002 22 shining Utilities Installation and Instruction Manual 1 The first partition of the first physical drive always being assigned to letter O 2 The first partition of Subsequence installed hard drives always being assigned to the next available drive letter 3 After all the first partitions of each physically installed drive were assigned a drive letter the system will start from the first physical drive again and assign an additional drive letter to each of the extended or logical partitions respectivly and according to the description in this manual This process will continue for the next installed physical drive until all available drive letters are exhaulted Any left over drive letters will be used for supporting additional network drives and any other storage devices that may be added to the system e g an external storage device File systems After partitioning is completed each partition must be formatted before it is useable by the operating system During the formatting process the operation system will create a file system according to the partition type that is setup on the drive Each partition shall carry the file system of its own type Fo
13. 1 Yormon 10 0 CitiDISK DV user select the drive saying Shining click on Erase function on top menu bar find Volume Format and select MS DOS File System for CitiDISK DV user This is the most important thing while partition formatting MacOS X Enter the volume Name as CitiDISK DV Click on Erase to continue Copyright Shining Technology 2001 2002 39 shining Utilities Installation and Instruction Manual pos am aeae Disk Utility 1 Biss mmidi Volumes Sekecoed Information First Aid frase Partition RAD en ENG Tomase a disk select dak or volume slot b sporspruabs format and nami J Tenlivan ang did ODER Fe frk Butlin oe kiss ning r Fraza i disk mesi F il wel avy i le That tek fu uti Eras ang gne ba gg UNTITLED SHum being tread aon thar disk Trig a salume resus in ean mume bel created Eras an opiral d r CD R D0 BA ate vel reed ina black optecal disc AD GETA gt aS TD ere Opi al eke Volume Formar M5 D005 File System A Mamm CtiD amp KE OV Install Mist 5 9 Driver F rus apr if mr selected tris geir Cheer be Led b a commune unnig bor O29 This opbon does not aheri Clasic Erase B Click the Jock bo prevent lumber changes Follow the message prompted by MacOS X and click on OK to continue While the process Is ongoing system will prompt Un mounting old volume Erasing data and other messages indicating the process Is
14. 2BE cSEPSONSSTATUSMON2WIN ARO 2BE vel oMEPSONSSTATUSMONZWIN2KDZBE Available ragisty keys Time Frame Begin i 171300 End 12 21 3995 Step 7 of 4 Previous Nest gt Restore Cancel Restore step 2 5 Once the Backup Set file is loaded click to place a check mark next to the files that you wish to have restored It is not necessary to restore all files Click Next to proceed y Shining Recovery Wizard JEJ x Hestore folder selection Where do vou want to restore your files to C Altemate location f Recreate subfolder tree Step 3 of 4 Previous Hest gt Cancel Restore step 3 6 Choose the location where you want the files restored Picking the original location will overwrite the existing files whereas an alternate location will not Copyright Shining Technology 2001 2002 11 shining Utilities Installation and Instruction Manual y Shining Recovery Wizard I a aloj x Restoring E TTE Options Restore corupted files Restore security Password o Restore Exit Step 4 of 4 lt Previous Hest gt Restore step 4 7 To Restore Corrupted Files Check Box setting Restore Step 4 During the restore process the Restore program also will check that all restored files are in good condition CRC error check However the restore may encounter corrupted files from the backup source Although the chance of running this pr
15. Backup set selection Enter the name of the Backup set to restore files from Where are the catalogs files located Check this box if you no longer have the Catalogs Step 1 of 4 Previous Next gt Restore Cancel Restore wizard step 1 1 You can also input that to the program and it will locate and report what backup set is available for restoring If you do not yet have a catalog for your backup sets then check the Check Box and click Next to continue 2 If you enter the name of the backup that you wish to restore and if you have Catalogs of backup sets and have checked the Catalogs check box the following screen will pop up and allow you to create a new catalog for your backup set files n Shining Recovery Wizard E x Catalog recreation step Where are the backup files located Where would you like to recreate the catalogs to r Recreate Cancel Recreation of backup catalog 3 Fill in the required information Itis recommended that you recreate the catalogs in the same location as the backup 4 Click the Recreate button and it will take you to the next step in the restore process Copyright Shining Technology 2001 2002 10 shining Utilities Installation and Instruction Manual y Shining Recovery Wizard JE x What would you like to restore Available files ae for the SF ec T TON 2 9 1998 2 1 7 08 PM cXEPSONSSTATUSMON WIN 2k DO
16. Follow the installation prompt to install the utilities For quick and easy installation we recommend installing the utilities to a default location However there is also the option to install the utilities to a preferred location 4 During the installation process the install program may copy or update some files to your computer When prompted for file replacement always keep the latest version of your files 5 After the installation is completed a Shining Utility Icon will be created on the Desktop for easy access 6 To un install the utilities Go to Start gt Settings gt Control Panel and run the Add amp Remove Program After the Utility is un installed manually delete the Shining Utilities Icon from the Desktop by dragging it to the Recycle Bin Copyright Shining Technology 2001 2002 shining Utilities Installation and Instruction Manual Using Shining Utilities Windows Y After successfully installing Shining Utilities you will see EN the Shining Utilities logo and shortcut on the desktop Double clicking on that will launch the opening screen pictured in figure 6 1 Main Screen which is the main menu for all the utilities Check the center bottom square to be certain that the utilities detected the proper OS for your system If the OS described is mismatched with what you know your OS to be Shining Technology recommends not running the software further Please click on the button marked Website to take
17. K DV is properly prepared and is ready to record video directly from camcorder Complete Hard Drive Setup Windows 4 This section is created for advanced technical user who wants to prepare multiple partitions and multiple volumes from a single physical hard drive Introduction In order for a hard drive to be recognized and used by a PC and the Operation system it must be prepared in certain ways prior to becoming operational There are two main steps to preparing a hard drive Copyright Shining Technology 2001 2002 19 shining Utilities Installation and Instruction Manual 1 Create a partition 2 Format the partition and place a file system on tt Shining s Hard Drive Setup utility is designed for simple hard drive partitioning operation only This utility does not support resizing merging or converting partitions from one type to other This utility also will not repair any damaged partition If a more sophisticated portioning operation is required please use another hard drive partition product that is available in the market Since the inception of the PC many partition types partitioning rules and file systems have come into use Some of these partition settings and file systems are not compatible with the currently available Windows OS and vice versa Information provided in this section is for reference only Users of this Hard Drive Setup utility are fully responsible of making the proper decision on how to setup the
18. Shining Utility Suite Windows and MacOS Installation and User s Manual v3 2 ja USA hip n ior a n sa rm CitiDISK gt bl b z eee Reason for Change Release 3 1 01 27 2003 Release 3 2 02 12 2003 Copyright Shining Technology s 2001 2002 2003 shining Utilities Installation and Instruction Manual Table of Contents Chapter 1 0 Forward license copyright agreements amp trademarks rrrnrrrrnnnrvernnnvnnr 3 Chapter 2 0 About Shining TeCHnOlo cccccccccsssccsssecesseeessseecesseeseseeessseeesssseessseeessaees 4 Chapter 3 0 Installation and Usage for Windows rarnnvrnrnnvennnvvennnvvennnvvennnvnennnvvrnnnvesnnnnenn 5 KTODUGUON VVINGOWS serende n A 5 System Requirements Windows rrrnrnrvrnnnvvrnnnvvrnnnvernnnvrnnnnvennnnnennnnnennnnvennnnnennnnnennnnnsnnnneennn 5 Hard Disk Space and Memory requirements ccsssssessssseseeeeeeeeeeeeeeeeeeeeeeeeaaassesseeeeeeeeeeeeeeeess 6 Utilities Installation and Un Installation Windows rnrrrernnnnrvrennnnnvvrrnnnnnvvrrnnnnnvvrnnnnnvnnennnnr 6 Using Shining Utilities Windows rrrnnnrrnnnnnvvrnnnnvvrnnnnvnrnnnnvnrnnnnnnrnnnnnnrnnnnnnennnnnnennnnnnsnsnnnnsnnnnn 7 Simple Hard Drive Setup for CitiDISK DV Windows rrrrnrrenenrvennnvvennnvvennnvvrnnnvvrnnnvennnnne 17 Complete Hard Drive Setup Windows rrrnrrrnrnrvennnrvrnnnrvrnnnrvennnrvennnvvennnrnennnvnrnnnnnrnnnnnennnne 19 DEE VIN ee 27 Operating Sy
19. a copy of the program path information earlier all you have to do is paste the information into the data entry window next to the Browse button EE corw ACCess Setup Continue to CDR CDRYW Writer Set Up CORACORW Writer Program Location Browse Update CD CDRW first time or setup screen Copyright Shining Technology 2001 2002 15 shining Utilities Installation and Instruction Manual Once the data is entered click the Continue to CDR CDRW Writer button to complete this setup process The CDR CDRW program launcher will start your CD recording program to confirm the setup is successful From this point forward the CDR CDRW button will launch your CD recording software whenever you single click on it Once the CDRW program is started follow its instructions for creating your own CD Re set up the CDR CDRW function Sometimes it is necessary to change the setup of this CDR CDRW function due to changes in the CD recording program To do this follow the steps below 1 From the main menu Right click on the CDR CDRW button The setup screen will appear and be ready for you to reconfigure this function 2 Repeat the setup process at the top of this page to change the path of where you re new or updated CD recording program is located If you only updated your CD recording program and did not move its installed location you do not need to re setup this function 3 Click on the Update button to f
20. e part of the Main menu there is Operating System O S detection and report information area This information should confirm the type of O S that Shining Utilities is running on This is important to confirm that it matches the O S you believe you are running because some of the Shining Utilities functions are very much O S dependent If the detection is not correct some utilities function may not work properly and may even result in a loss of data Caution must be taken if this occurs Quit MacOS 9 x The Quit button located in the main menu is for exiting the program The usage of this Quit Button is very much self explanatory Copyright Shining Technology 2001 2002 38 shining Utilities Installation and Instruction Manual Chapter 5 0 Installation and Usage for MacOS X Hard Drive Setup MacOS X K CitiDISK DV user must select MS DOS File System so as to properly prepare the hard drive for DV recording MacOS 10 x provides a Disk Utilities in Applications Utilities folder Partitions volumes created by Shining DriveSetup Utility program under MacOS 9 2 x and Windows are fully compatible with MacOS 10 x Here is how to partition format the CitiDISK DV in MacOSX Find the Disk Utility and activate it after plugging in the CitiDISK DV into system MANET Application L Deseloper l Fire Dan at DS Bods E Library peturel iill Sikem a Users 31 01 Modified 3 1 0
21. e space is allocated Copyright Shining Technology 2001 2002 shining Utilities Installation and Instruction Manual 6 Logical Partition with unused space Since it is possible to define multiple Logical Partitions with in an Extended Partition this icon indicates the let over space that is available for defining more logical partitions until the total available storage space is exhausted How to Use the Hard Drive Setup Utility From the Main Menu you can launch the Hard Drive Setup utility and start to create or change the setup of your hard drive partitions Click on No to enter complete hard drive partition and file system selection Shining Utility Suite 7 3 Would you like to create a DV Disk Click Yes to create a DV Disk or No to work with hard drives uperaung ETE IE website detected Windows 2000 After the Hard Drive Setup has started you may receive a warning message as follows pod ST MEET eta POSSIBLE ERRORS IN E LE Nun IM Go ae tease ed WARNING Unusual or erroneous partitions detected OF This message should only occur when a hard drive has a very old partition type or was installed in a very old system previously Normally you should click on the OK button and continue the partition process However if for any reason you are not sure about changing your partitions or want to preserve the partition setting on this drive please abort the program and do not attempt
22. eed MHz of systems that are available on the market Copyright Shining Technology 2001 2002 shining Utilities Installation and Instruction Manual Following Operating Systems O S are supported DOS Win3X Shining Utilities does not support this O S Windows 9X All versions of Windows 9X are supported however for product utilizing USB V1 1 amp V2 0 FireWire 1394 and other newer interface I O technologies drivers for Windows 98 SE or newer O S may be required Windows ME supports all versions Windows NT only supports NT4 0 with minimum of service pack 4 SP 4 or newer service pack installed Windows 2000 supports all versions Windows XP supports all versions Hard Disk Space and Memory requirements Shining Utilities is a very compact program It only requires a minimum of 2 5 MB of disk space for installation under all supported operating environments Memory requirement is also at minimum Utilities Installation and Un Installation Windows In most cases Shining Utilities will begin the installation program automatically when the CD is inserted into the CD drive If it does not start please follow the steps below to begin installing the program 1 Insert the Shining Utilities CD into your CD drive From My Computer double click on the CD drive icon 2 If the installation program still does not start run the SETUP program by double clicking on the file named SETUP EXE on the CD 3
23. et as active bootable If booting is not required different combinations of primary extended and logical driver partitions can be created according to the basic rules defined by the Microsoft Operating System requirements Extended A hard disk can also be set up to have only extended partitions Please note that an extended partition can never be used as a boot partition Logical Normally a Logical partition is automatically assigned to the Extended partitions by the OS if the user is intended to use the whole Extended partition as one drive However if the user would like to further divide an Extended partition into smaller portions Logical partitions can be further created within an Extended partition After Logical partitions were defined under an extended partition the OS will automatically assign drive letters to each of these sub partitions Copyright Shining Technology 2001 2002 21 shining Utilities Installation and Instruction Manual Limit on Number of Total Drive Letters Available Please note that a maximum of 26 drive letters can be used under all Microsoft Operating Systems Caution must be taken while planning for the total number of partitions regardless of the combinations of types a system could have Don t forget these 26 drive letters also will be used for network drive mapping and added external storage devices Partitioning Rules In general all hard disks operating under Microsoft operating systems must
24. etup and select the partition that needs to be deleted 2 Click the Delete button to delete When prompted for confirmation select Yes to continue Copyright Shining Technology 2001 2002 26 shining Utilities Installation and Instruction Manual 3 After all selected partitions are deleted select the Commit All Changes to commit all changes This is an added protection against the accidental deletion of working partitions At any given time prior to finishing the setup process and clicking on the Commit All Changes button you can always abort the partition operation and have nothing changed to your hard drive by clicking on the Cancel button 4 After the system Is rebooted the utility will automatically restart and you are ready to define new partitions or use one of the other features Diagnostic Windows The Diagnostic tool allows you to examine your Shining product to confirm it is working properly Run this test as follows This is an easy method to tell if a drive you are installing is functioning well This function creates a small file reads it backs in and deletes it Any error messages will be displayed if you try to write to a CD or drive that is protected You can stop the test at any time at Diagnostics x Cancel M Compare C Short Test Test Now Stop Test C Medium Test Long Test This test is harmless It simply creates C Very Long Test a small file reads it back in
25. follow partitioning rules 1 Maximum of four partitions can be supported This can be in combinations of Primary and Extended partitions Only one Primary partition of one physical drive can be set to be active bootable at any give time If there are more than one physical drives installed only one of the Primary partitions of one of the installed drives can be set to active bootable 2 Logical partitions are further sub divisions of the Extended partition Technically speaking there is no limit on how many Logical partitions sub extended partitions can be created in a system provided that the total numbers of the drive letters used in a system does not exceed 26 Drive letter A to Z With the exception of using the entire Extended partition as one drive an Extended partition itself that contains more than one Logical partition will not be assigned a drive letter K If FAT16 partitions are preferred be aware of 2047 Mbytes per partition limitation Example for a Typical Partition Setup amp Drive Letter Assignment A simple diagram is presented here to further illustrate what a typical hard disk partition may look like Table 1 Example for partitioning an 8 GB hard disk and Drive Letter Assignment Primary Boot 1 5 GB 3 5 GB 1GB 1GB 1GB Logical Logical Logical Drive Letter Assigment In comparing with the example above the drive letter assigment may be different in your system Under the Windows operating system
26. g because some of the Shining Utilities functions are very much O S dependent If the detection is not correct some utilities functions may not work properly and may even result in a loss of data Caution must be taken if this occurs Cancel Windows The Cancel button located in the main menu is for exiting the program Other Cancel buttons found through out of the program are for exit from the particular function that you are running The usages of these Cancel Button are very much self explanatory Copyright Shining Technology 2001 2002 28 shining Utilities Installation and Instruction Manual Chapter 4 0 Installation and Usage for MacOS 9 x Instroduction MacOS 9 x Welcome to the Shining Macintosh Utility suite of applications and utilities This utility is designed to enhance Shining Technology products This software suite may work with other devices installed in the computer however it is important to note that it is developed solely for working with the Shining Technology products Unpredictable results or data loss may occur if any of these utility functions are used in conjunction with non Shining products Shining Utility Suite ui inepe ra Pao Tea Soft are Thr Flac OG Website Version 12 Opening screen The features include e Shining Drive Setup allows you to prepare a new hard drive to be used by the Macintosh by creating the necessary partitions This utility can also reco
27. in progress Click OK to acknowledge the process once it s done 14 CitiDISK DV is partitioned as one single FAT32 volume not a partition which is not cross platform compatible with Windows systems even though it is an actual FAT32 file system Le HFSPlus is not supported at the time of this manual release so user has to select MS DOS File System in Volume Format selection Non CitiDISK DV user Select the drive saying Shining click on Erase function on top menu bar find Volume Format Several different types of partition and file systems are available to use Native file system for MacOS is Mac OS Extended Select one from the list Click on Erase to continue Copyright Shining Technology 2001 2002 shining Utilities Installation and Instruction Manual fee 8 Disk Utility L Bek and 0 Volumes Selecped information First Aid f Erme Partition man 2 57 GE Mine Poin Tara To trait disk seler dink of v lunt s ker he appriprlatet forst and fame S Ten Ten ard ard dick The erate buman raging dice results in al epimer af Aal div benag rued and ses large our being creed ion f dice s Frasing rohkend theta in didn selama berg created a Erasing an dete das KOK DO EA em 0 vill realt in blank spdcal diat Mo dormar amp appie to an erased opikal dist Ki unritled I Volume Formal uer TG Mac OG Standard M5 DOS File System LIME Fi
28. ing a regular backup practice that only requires certain changing files to be backed Copyright Shining Technology 2001 2002 shining Utilities Installation and Instruction Manual up 5 You can use the verify function to confirm your backup in progress though it is faster to not use it To employ this feature click on the Verify Backup box just below the Backup Type Selections 6 Current file changing file names in list and backup size file sizes 7 The Progress bars at the bottom give you a running description of how the backup is doing in terms of which file is currently in progress and the overall percentage for the total job 8 After the backup is finished go to the destination location and check for the backup file names and that the files are populated with data How to Restore To restore a backup set is a relatively easy task Again from the Archive s main menu launch the restore function by clicking on the Restore button The Restore program Shining Recovery Wizard will come up and be ready for you to restore a process y Shining Recovery Wizard 4 5 x Welcome to the Shining Recovery Wizard Cancel Click on Next to begin restoring files Hestore Restore wizard first screen Follow the Steps below to restore your files Copyright Shining Technology 2001 2002 shining Utilities Installation and Instruction Manual Shining Recovery Wizard JE i x
29. ing program resides From your taskbar follow the steps below 1 Click on Start and select the Programs folder se FA Start Ss P 3 i ja 2 From the popup menu locate and highlight your CDRW program then right click to get the program s properties and launch the Properties menu Here is an example by using the WinZip program Copyright Shining Technology 2001 2002 14 shining Utilities Installation and Instruction Manual General Shortcut TA WinZip 7 0 Target type Application Target location vINAIP Target C UTILS STOOLS S WINZIPAWINAIPS2 EE i Stark ir CAUTILS STOOLS wilh IP Shortcut key None Hun Normal window a Find Target Change Icon OK Cancel 3 Record or make a copy of the information in the Target window This is the information you ll need to setup the CDR CDRW program launcher later 4 Exit from the program properties menu by simply pressing the Cancel key from you keyboard D Continue to the next section of this manual to finish setting up the utility Setting up the CDR CDRW function for the first time The CDR CDRW program launch function will prompt the user to set up the program path when it is started the first time A setup menu Fig 9 2 will appear and allow user to enter where the installed CD recording program is located You can directly enter the path or use the Browse button to select the path If you already have made
30. inish this process After this process is completed any subsequent clicking on the CDRW button will take you right to your installed CDRW program Once the CDRW program is started follow its instructions for creating your own CD HD Icon Setup Windows The HD Icon Setup button allows you to browse and install different icons for each peripheral and or drive This is useful for establishing a unique identifier for the user with multiple drives to quickly and easily locate the files they desire You can use some of the icons that come installed with this utility or browse to a Web site of your choice to pick out or customize icon files of your choice Please note that this function only supports operating systems that have Internet Explorer 5 0 or greater installed All icon files used must be compatible with the Microsoft icon display and physical size standard Drive Icon Setup To assign your custom icon to a Hard s Drive select the drive then pick an icon Drive E C click the browse button and finally click Set Drive Icon Arama C Program Files Shining Utility Suites Shining ico Set Drive Icon Reset Drive Icon Reboot software Icon Editor is required for creating a customized Icon file for your hard drive There are many Icon Editor s available as a free software download via the internet One of Hard Drive Label the sites we recommend ts Shareware com HD Icon Setup main screen Cop
31. ir hard drives Partition Basics There are many types of partitions used by PC systems Shining s Hard Drive Setup utility only supports the hard disks that are partitioned and formatted under Microsoft operating environments such as DOS6 0 and newer Windows 95 Windows 98 Windows ME Windows NT and Windows 2000 XP In order for a hard disk drive to function in a PC it has to have at least one partition setup Normally this is also the bootable partition if this is the only drive installed in the system Removable hard disk SyQuest and lomega Jazz could be setup to have 1 partition or no partition just like a giant floppy LS120 ZIP For super capacity floppy devices such as ZIP and LS120 there is no need to partition because these are not supported as a Hard Drive There are a few deviations of partition types that have evolved through the continued development of the Microsoft Operating Systems and the need of supporting increased size of hard disk Please note that only Win95 version B and newer OS can support a very large hard disk Large drive support also can be limited by the system s BIOS To install a large hard drive over 8 GBytes a newer BIOS that supports LBA Logical Blcok Addressing mode and extended INT13 operation is required Partition Schema Shining s utility supports the follow partition format e 16bitFAT Maximum size for a single partition allowed is 2047 MBytes e 32bit FAT Maximum size for a single partitio
32. is utility The Copy Directory Tree Now button will remain grayed out until a source and destination directory are inputted To make a copy of a drive or disc media all you need to do is follow steps below 1 Select a Source directory by single clicking on the Copy From Directory button A file selection window will appear for selection files 2 Select a Destination for the files by single clicking on the Copy To Directory button If you only want to copy selected files to a drive or storage media all you need to do Is select the root directory for that device 3 Once both the Source and Destination inputs are completed the Copy Directory Now button will be available for starting the copy process Click on it CD CDRW Windows The CDR CDRW function is a short cut to the CD recording program of your choice With only one simple click on the CDR CDRW button you are ready to transfer and copy selected files and directories to a CD media Shining Utilities does not bundle a CD writing program A third party CD writing software such as CD Creator must be installed and in operation prior to using this function Try to remember or record the installed location path of the CD writing program This information will be required when setting up the CD CDRW recording program launch function If you do not know or have forgotten where your CD recording program is located below are instructions to find out where your CD writ
33. le System ee Fihi Gets i el beled PG die Caer be used by conata Puree Max 059 Thig opion does sa alen CHEshi Options Erase E Click the fork to preni further changes Follow the message prompted by MacOS X and click on OK to continue While the process is ongoing system will prompt Un mounting old volume Erasing data and other messages indicating the process is in progress Click OK to acknowledge the process a once it s done After the hard drive formatting process is completed a EES drive icon will be displayed on desktop and it s ready to use Ejecting the Drive Icon in MacOS X Drag the CitiDISK DV drive icon into Trash can before unplugging the cable Chapter 6 0 Customer Supports shining Technology provides many easy ways to report the problem via Website Tech support Access http www shining com website select Download and Support page and look for Utility category for latest Utilities suite updates Select Contact Tech Support is recommended by us by providing detail and organized information to us Copyright Shining Technology 2001 2002 41
34. n allowed is 2047 GBytes e NTFS Windows NT 2000 and XP e NTFS5 Encrypting file and Windows 2000 XP only For much older operating systems such as DOS 6 22 and older that use a 12 bit based partition schema 12 bit FAT the maximum size for a single partition is limited to 33 MBytes Since Shining s Hard Drive Utility does not support this partition type backward compatibility issues must be taken into consideration Please cross check with the compatibility table below for more information on selecting what type of partition you are going to create Table 1 Compatibility Table Copyright Shining Technology 2001 2002 20 shining Utilities Installation and Instruction Manual OS File 16bit FAT 32 bit FAT NTFS NTFS5 Systems Windows 95 Version a and Supported older Windows 95 OSR2 Version b and newer Supported Supported Windows 98 Window ME NT All versions Supported Supported Win 2000 All Windows XP Supported Supported Supported Supported E FAT12 is supported by all of the operating system described above but not Shining s HDD Setup Utility NTFS5 is supported by Win200 XP and it s implicitly imposed by them Partition Type Once the proper partition scheme is determined and selected a hard disk can be partitioned to the following partition types e Primary bootable or not e Extended e Logical Primary If a hard disk is intended to boot the system it must have a Primary partition and be s
35. n the button marked Website to go directly to the Shining Technology website for technical assistance Shining Utility Suite Main Menu Opening Screen Simple Hard Drive Setup MacOS 9 x K CitiDISK DV user must select DV Windows so as to properly prepare the hard drive for DV recording Click on the Shining Drive Setup box at the center User should find a FIRE interface hard disk on Drive List screen Click on the drive entry and Initialize option shall reveal Click on Initialize to continue Shining Drive Setup Drive List List of drives Interface Volume name s t ATA NinePo1 nTwo T enTwo This drive can be initialized This screen is Initialize screen Click on Custom Setup to continue Copyright Shining Technology 2001 2002 31 shining Utilities Installation and Instruction Manual Shining Drive Setup Initialize Dato on the following volumes will be destroyed DV DISK Default partitioning scheme 1 partition Default initialization options None The following screen is Custom Setup screen Find Type selection click on up down arrow symbol hold the mouse button and scroll to DV Disk Windows selection and let go the mouse button Confirm the DV Disk is setup as 1 Partition scheme DV Disk Windows type and as one full size volume only Calculated data size after format is about 8 less than total
36. nfigure the partition arrangement of an existing hard drive however all existing data will be erased during this process e Website where Shining Technology s products and services are only a click away e Automatic Operating System detection it shows your Mac OS version The empty slots in the pane shown above are for future additions Copyright Shining Technology 2001 2002 29 shining Utilities Installation and Instruction Manual System Requirements MacOS Version 1 X of the Shining Macintosh Utilities does not have all the tools for the Macintosh platform yet For more Mac support please contact Shining Technology or visit the Web site for more information The follow Operating Systems O S are supported Mac OS 8 6 Shining Utilities was not tested under this version we Mac OS 9 x All versions of Mac OS 9 X are supported however for products utilizing USB V1 2 amp V2 0 Firewire 1394 and other newer interface I O technologies Mac OS 9 2 1 are preferred ee Mac OS X Mac OS X has built in supports for all USB Mass Storage Compliant devices Firewire and PCMCIA Shining Utilities is a very compact program As of now it only requires less than of 1 0 MB of disk space for installation under all supported operating environments Memory requirements are also kept to a minimum Utilities Installation and Un installation MacOS 9 x In most case the Shining Utilities will run the installation program
37. o a different size and type of drive and storage media as long as the size of the destination device is the same or larger than the source Currently our utilities do not provide true image copy of a media other than on a file level only All files attributed have to be set to visible and readable in order to be copied System or hidden files attributes also have to be reset to read format in order to be copied DiskCopy can therefore not create a boot disk To make a copy of a drive or disc media all you need to do is follow the steps below 1 Select a Source device at the From drop down list and Destination device at the To dropdown list Copyright Shining Technology 2001 2002 13 shining Utilities Installation and Instruction Manual 2 Click Copy Drive Now to start the copy Copy Directory Tree In addition to copying an entire drive and storage media at once as above this utility will allow you to select a single directory tree for movement within the same drive or to copy onto another drive It is a simpler way to do small backups or copying of collective files as needed You can only select one directory in a drive at a time but every file within that directory with the exception of hidden files will be included If a file is open and in use by the system or an application it may not be available to be copied To avoid this possibility it is recommended that you terminate all unnecessary programs before using th
38. oblem is very remote due to the Backup process verifying all files that it backs up the Restore program can be setup to go ahead and restore corrupted files and let the user have a chance to recovery the data Check the Restore Corrupted files check box to allow restoring corrupted files as is Otherwise uncheck the check box and Restore will skip these files By default this is not checked 8 The Restore Security Check Box setting Restore Step 4 This is for Windows NT 2000 and XP setting only When this check box is checked Restore will recreate file security information permissions when it is restored By default this is not checked y Recovery Wizard e x The following have been skipped Total number of files 21 Files processed 21 Files Skipped 0 Result 0 Operation completed successtully File being restored chepsone EPSOM Ee __ Total Progress 100 LITT TTT TTT TTT Restoring in process screen Ei Always make sure that there is enough room storage space at the location where files are restoring to before starting the restore process Files that are open using of the Operating System or corrupted files may be skipped Copyright Shining Technology 2001 2002 12 shining Utilities Installation and Instruction Manual 9 Verify Restored files Typically the chance of a restored file being corrupt is very low However if a backup is done to a disk it is always a good idea
39. p and peripherals from drive to drive and from drive to disks Note While using Shining Utility s Archive function please close all other unnecessary programs that are running in your system Files that are open or being used may be skipped during the backup process Follow the instructions below to start your archive process to launch the backup function 15 x Backup From Backup Now Backup To Cancel BackupSet name Backup Type Full 0 Incremental Differential I Verify Backup Backup Size Current File gt Mn Progress On Current File a Overall Progress Backup screen 1 Select files or directories to be backed up by entering the path name in the space after the Backup from button To browse for the selection click on the button 2 Select the destination drive by either entering the path name in the Backup To space or click on the button to browse for the correct location Always be sure of the following a That your destination drives or disk contains enough space for the material to be backed up b That you have prepared multiple diskettes for large files including LS120 Zip and other removable Medias 3 Enter a BackupSet Name This will be important when you go to resiore files For ease and convenience we recommend writing down the set name somewhere it will not be lost 4 Choose a type of backup it can be full for a complete list or incremental if you are employ
40. physically available size That s normal No need to worry Click OK to continue Shining Drive Setup Custom Setup Drive Volume names s DV DISK Partitioning scheme I Partition Total capacity 55 89 GB Mac 05 Standard VWolumes Volum Wac 05 Extended DV Disk Mac Name Type File Exchange Windows gt DV Disk Windows pz Size 29 8 Ob r Select partitioning scheme file system type and enter the volume name and size Now Initialize screen is back Click on Initialize to continue The full format process may take several minutes depends on the size of hard drive Once the formatting process Is complete Drive List screen will come back User can verify the new volume name is DV Disk mmddyear or choose it to initialize again Copyright Shining Technology 2001 2002 32 shining Utilities Installation and Instruction Manual Sng DIE SE eee List of drives Interface Volume name s ATA Ni nePoinTwo TenTwo FIRE DV DISK 12 Select a drive to setup Initialize Select Quit function on top left corner of File menu to exit utility Save 5 zj Page Setup Print FP NinePotntwo TenTwo DV DISK 12 r Select a drive to setup initialize Dy DISK O12 User can find the above DV Disk mmddyear icon on the desktop and it s ready to use
41. plication works like the Apple one so it can be used right away This application doesn t support boot partitions yet and it has only been tested with Apple and Shining drivers K This application relies on the respective drivers to support certain services that have been defined by Apple Since partitioning was never a big issue because Apple offered it for the internal drive many driver writers ignored this support and hence this application may not be able to work on all drives Shining however tries to support all the calls for their products So if the application fails to format a third party drive you will have to format it in the Finder Copyright Shining Technology 2001 2002 35 shining Utilities Installation and Instruction Manual The following figures show three screen shots from the Shining Drive Setup application Shining Drive Setup Drive List List of drives Interface Yolume name s F ee NinePoinTwo TenZeroFour FIRE HFS HFSP Lus 005 This drive con be initialized Initialize Drive List Window Initialize is disabled until a drive in the list has been selected Clicking the button brings up the Custom Setup window File Sharing must be turned off to partition a drive The first Drive List window shows a list of drives the application has found The only button in this window Initiali Shining Drive Setup Custom Setup Drive
42. quarters in Cypress California In addition to designing and manufacturing I O devices and products utilizing PCMCIA CardBus USB 1 1 amp 2 0 Firewire A amp B and DV technologies Shining Technology is also one of the major suppliers of the product in the PC and MAC computer market This manual is designed to provide detailed information on the bundled software suite Shining Utilities Shining Utilities was developed and offered to Shining Technology s customers for the purpose of further enhancing the functionality of our products This utility program is applicable for the entire Shining adapter kits or total solution products Chapter 3 explains how to use the Shining Utilities Suite for PC Windows environments Chapter 4 explains how to use it under Apple MacOS9 x environment Utilities Suite Macintosh version is also available from Shining Technology at Mac Volume of this CD Chapter 5 explains how to utilize MacOS X provided utility to perform the tasks CitiDISK DV user must read and follow instructions of section Simple Hard Drive Setup for CitiDISK DV User in each above different OS s Shining Technology s WEB site www shining com contains detailed information for the following subjects Contact information Product Information Where and how to buy products Support and software download information New product and special event announcements O O O O Copyright Shining Technology 2001 2002
43. r example if the physical drive is divided into three partitions in combination of FAT16 FAT32 and NTFS each logical drive letters shall carry individual file system tables after formatting process are completed E Microsoft NT operating system does not recognize FAT32 partition file system a third party file system translator would be required Running under Windows 98 ME 2000 and XP operating systems Throughout this program there are six different icons being used to represent different drives and their partition settings Fig 11 5 1 1 1 Physical drive Indicates the installed physical drive 2 Free physical drive space available Represents the total drive space available for partitioning 3 Primary Partition and the space it uses Represents the drive space being used by a Primary Partition The description next to the icon also will report the file system type If there is Active labeled after the size information it means this is a boot partition 4 Extended Partition Indicates that this is an Extended Partition and no Logical Partition is defined as of yet A Logical Partition unused space icon icon 6 with equal size to this Extended Partition will appear under this icon This indicates this Extended Partition is ready to be further divided into Logical Partitions or used as the whole space for a FAT16 or FAT32 type partition 5 Logical partition and space it used Indicates a Logical Partition is defined and th
44. rdance with the terms of the license agreement This licensee may make one copy of the software for backup purposes PRODUCT LICENSE INFORMATION NOTICE TO USERS CAREFULLY READ THE FOLLOWING LEGAL AGREEMENT USE OF THE SOFTWARE PROVIDED WITH THIS AGREEMENT THE SOFTWARE CONSTITUTES YOUR ACCEPTANCE OF THESE TERMS IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT DO NOT INSTALL AND OR USE THIS SOFTWARE USE OF THIS SOFTWARE IS UPON CONDITION OF COMPLIANCE BY USER WITH THE TERMS OF THIS AGREEMENT 1 LICENSE GRANT Shining Technology grants you a license to use one copy of the version of this SOFTWARE on any one system for as many licenses as you purchase You means the company entity or individual whose funds are used to pay the license fee Use means storing loading installing executing or displaying the SOFTWARE You will be granted an evaluation period of not more than 30 days after which time you must pay for the SOFTWARE according to the terms and prices discussed in the Software s documentation or you must remove the SOFTWARE from your system This license is not transferable to any other system or to another organization or individual You are expected to use the SOFTWARE on your system and to thoroughly evaluate its usefulness and functionality before making a purchase This try before you buy approach is the ultimate guarantee that the SOFTWARE will perform to your satisfaction therefore you understand and agree that there is
45. rtition and formats it as FAT32 file system for you Now select the hard disk drive you want to re partition re format Once the disk drive is selected the Create DVDisk option will reveal Copyright Shining Technology 2001 2002 17 shining Utilities Installation and Instruction Manual ry arene ek Create DO sik Cancel Drive 38 162 MB Frimary FATS3Z 38 162 HB Drive 19 618 MB Primary FAT32 19 615 MB Bootable Driva 19 469 HB Frimary FAT16 2 047 MB Extended 17 422 MB Logical FATS 17 422 HB Primary FAT32 Click on Create DVDisk to continue A message screen shall pop up indicating the Assigning Drive Letter Partitioning and formatting is started Pre MT vm Preparing DV Disk The program is partitioning and formatting the drive This process can take up to half an hour for large drive 8 9 100 GB Parlitioning and formatting Warning Stopping the DV Disk process will not recover ony dato on this drive lithe process is stopped lhe dive must be repariiboned and reformatted betore i can be used by the system Next message screen Is informational only indicating above process Is still undergoing The whole process may takes up to 30 minutes for large size hard disk drive Drive Management Preparing DV Disk The program is partitioning and formatting the drive This process can take up to half an hour for large drive e g 100 GB 17 24 2003 9 31 03 AM
46. sequential damages so the above limitations or exclusions may not apply to you 6 SEVERABILITY In the event of invalidity of any provision of this license the parties agree that such invalidity shall not affect the validity of the remaining portions of this license 7 NO LIABILITY FOR CONSEQUENTIAL DAMAGES IN NO EVENT SHALL Shining Technology OR ITS SUPPLIERS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL SPECIAL INCIDENTAL OR INDIRECT DAMAGES OF ANY KIND ARISING OUT OF THE DELIVERY PERFORMANCE OR USE OF THE SOFTWARE EVEN IF Shining Technology HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES 8 GOVERNING LAW This license will be governed by the laws of the State of South Carolina as they are applied to agreements between South Carolina residents entered into and to be performed entirely within South Carolina The United Nations Convention on Contracts for the International Sale of Goods is specifically disclaimed 9 ENTIRE AGREEMENT This is the entire agreement between you and Shining Technology which supersedes any prior agreement or understanding whether written or oral relating to the subject matter of this license 10 TRADE MARK All of the company product names mentioned in the manual is the registered trade marks of their own Copyright Shining Technology 2001 2002 shining Utilities Installation and Instruction Manual Chapter 2 0 About Shining Technology shining Technology is an U S Company founded in 1992 with head
47. stem Detection Windows rrrrrrnnrrnnnnvrnnnnvrnnnnvennnrvennnrvennnvvennnvnennnnnennnnnennnne 28 CANcell VIG OW Saa 28 Chapter 4 0 Installation and Usage for MacOS 9 X rrnrnnvrnrnnvrnnnnvrnnnrvennnrvesnnvvennnvnrnnnvernnnn 29 IAStroduetion MACOS 9X airt e aaa aeei 29 System Requirements MacOS eer a a e 30 Utilities Installation and Un installation MacOS 9 X rrrennnnnrrrennnnnvvrrnnnnnvvennnnnvvnennnnnvnennn 30 Using Shining WTilities MacOS 9X iscicsae cesses tat cr ceil eid eed iia NR 30 Simple Hard Drive Setup MacOS 9 X Joenani aE iE E 31 Complete Hard Drive Setup MacOS 9 X J rasnrnnnnvrnsnnvrnnnrvennnrvennnrvennnrvennnvnrnnavnrnnnvernnnnnennnne 33 Operating System Detection MacOS 9 X rrrrnnrrnnnnvennnnvennnnvennnrvennnrvennnnnennnvnennnnnrnnnnnennnne 38 UMOE eee 38 Chapter 5 0 Installation and Usage for MacOS X rrrnrnnvrrnnnnvvennnnvvrnnnvvvennnnvernnnnveennnnvesnnnnn 39 Hard DE SEN MENS ae eee 39 Ejecting the DINE 160N IN MacOS Xaver 41 CANE GS NPE SUNN arr 41 Copyright Shining Technology 2001 2002 shining Utilities Installation and Instruction Manual Chapter 1 0 Forward license copyright agreements amp trademarks Except as stated in the License Agreement this product Shining Utilities is provided as is without warranty or support of any kind either expressed or implied The software described in this document is furnished under a license agreement and may be used or copied only in acco
48. tion in relation to the number of potential network and external drives added to the system When installing a new drive make sure you do not see any drive letters or partition indicators Icon next to the physical drive Icon To define a new partition follow the steps below 1 From the Main Menu click on Hard Drive Setup and select the drive you would like to change its partition by clicking on the Physical Drive icon 2 Click on the Allocate button at the top of the main menu to enter the partition size and type of configuration menu Extended Partition bd 25 shining Utilities Installation and Instruction Manual 3 From the Allocate menu define the type and size of the partition that is required Please note that if the Length MB data entry box of the Allocate menu is left blank it means that you are going to allocate the maximum space for this partition 4 To complete the allocation setting single click the Create button You should see a newly defined partition appear at the utility startup screen This confirms that you have inputted all the necessary data for this new partition 5 To further define more partitions simply select any of the icons which have the label Free and repeat steps 2 to 4 in this section 6 After all desired partitions are defined click on the Commit All Change button to commit all changes and create the partitions Reboot 7 After the system is rebooted
49. uct that is available on the market Information provided in this section is for reference only Users of this Hard Drive Setup utility are fully responsible for making the proper decision on how to setup their hard drives Partition Basics Shining s Hard Drive Setup utility only supports the Apple classic operating environments such as Mac OS 9 0 4 and newer In order for a hard disk drive hard drive to function in a Mac it has to have at least one partition Normally this is also the bootable partition if this is the only drive installed in the system Removable hard drive SyQuest and lomega Jazz could be setup to have 1 partition or no partition just like a giant floppy LS120 ZIP Since the inception of Mac OS the partitioning rules are very much unchanged However there are a few deviations of partition types that have evolved through the continued development of the Mac OS and the capability of supporting increasing sizes of hard drive Please note that only Mac OS version 8 1 and newer OS can support a very large hard drive Partition Schema Shining s utility supports the follow partition file systems e Apple File Exchange partition need PC Exchange DOS format e Standard HFS Hierarchical File System e Extended HFS Hierarchical File System Plus e File Exchange DOS MS DOS File System like FAT16 FAT32 no NTFS K When DOS partitions or volumes are preferred make sure File Exchange application is enabled
50. up Initialize Window If the partitioning succeeds the application will return to the start window or else it remains in this view The Cancel button takes the user back to the start window The Custom Setup button allows you to re size each volume size The Initialize button allows you to execute the initialization Be aware that the initialize function will erase all of the data in the drive Miscellaneous Functions User can use Command R to Rescan Volumes amp File Edit FRY Hep Rescan Volumes R AREARE el aH e Setup Drive List Stop Speaking 3 aa e A EEE Voices Interface Volume name s ATA NineFoinTwo TenzeroFour FIRE HF5 HFSP Lus DOS a drive to setup initialize User can use Stop Speaking to stop voice or select various voices selection indicating functions completion Copyright Shining Technology 2001 2002 3 shining Utilities Installation and Instruction Manual File edit f Help Ekoscan Volumes R List of Dirvi Interface Volume makta Whisper Victoria high quality HineFainTyo Ter eraFa victoria HFS HESP Lue DOG Trinoids Ralph Prindess Pipe Organ Kai Panigr Hysterical Gig Haa Fred Select a drive to setup Initialize Bruce high quality ce Boing Bellis Bahh Bad Mews Albert Agnes high quality Operating System Detection MacOS 9 x At the lower middl
51. you directly to the Shining Technology website for technical assistance DLA ST EL Operating System website detected Windows 2000 Main Screen From the main menu you can go on to the following choices of applications Archive DiskCopy CDR CDRW HD Icon Setup simple Hard Drive Setup must read for CitiDISK DV users Complete Hard Drive Setup Diagnostics Website Archive Windows The Archive tool serves to provide a backup and restore function for disks drives and files Backups can be done in full or in incremental or differential amounts depending on the amount of data changed or added since the last archiving The restore function is a simple wizard tool that asks you the location of the archived files and catalogs and their intended destination THIS BACKUP SOFTWARE DOES NOT DO FILE COMPRESSION DURING THE BACKUP PROCESS AS PER A ZIP DRIVE However if your file is already compressed such as tar zip encrypted etc it will treat it as a regular file and backup restore in the current state Copyright Shining Technology 2001 2002 shining Utilities Installation and Instruction Manual ME Archive 00 ae Figure 7 1 Archive main screen In this section we will be giving an example of how to backup and restore a particular file in that order How to Backup Press the Backup button seen in figure also an easy method to arrange and transfer files between your lapto
52. yright Shining Technology 2001 2002 16 shining Utilities Installation and Instruction Manual To use Icon Setup 1 Select the drive in which you wish to assign an icon The default will always be Gi 2 Select the icon you wish to use The Shining icon is shown here as an example If you wish to use another simply browse to the icon you wish to use or if you don t have one already download the icon of your choice from online Another option is to customize the icon as per the Icon Editor of your choice 3 Pick a name for the hard drive if you wish and type it into the Hard Drive Label Dox 4 To finish the setup click on Set Drive Icon 5 Changes will be made after you reboot the system Simple Hard Drive Setup for CitiDISK DV Windows E CitiDISK DV user must select and follow this DV Disk preparation process so as to properly prepare the hard drive for DV recording Users can launch the Hard Drive Setup utility by selecting Hard Drive Setup option from the Main Menu For CitiDISK DV user you must select this option Any user can choose not to get involved in the details of computer hard drive partition and file system setup you can also select this option Would you like to create DY Disk Click Yes to create a DY Disk or No bo work with hard drives Website detected Windows 7000 Click on Yes to continue the simple hard disk setup Basically this program chooses one DOS Primary Pa

Download Pdf Manuals

Related Search

Related Contents

MANUEL D’INSTRUCTIONS  Digital Free-To-Air Terrestrial Receiver SRT 5011  Guía del usuario  Sun Fire V445 Server Administrationshandbuch  Samsung 400MX Užívateľská príručka  JVC XV-S300BK User's Manual  LE PURGATOIRE JE MANGE… MOI NON PLUS! IvAN TIRTIAUX  Livret 4 carnetCP2  Formation Debian GNU/Linux - root    

Copyright © All rights reserved. Failed to retrieve file