SEVEN STARS
Contents
1. LASER DISPLAY SYSTEM USER MANUAL SEVEN STARS BIG DIPPER LASER SCIENCE amp TECHNOLOGY CO LTD Please read the manual carefully before operating REV 2 00 BEAM LASER USER MANUAL MODEL MO20RG 4 Notices 1 This is 3B laser product Avoid eyes direct exposure to the laser light 2 Operate abide by the user manual Do not disassemble or repair the system by yourself When there is a problem please contact technician or your local dealer 3 Installation should be done by professional technician 4 Please set the laser product far away from those things as strobe light 5 Do not exposure the system to wet environment 6 Do not touch the system by wet hand and pull the power cable forcefully 7 The work temperature is 10 40 C so the laser conduct doesn t work until it reach the work temperature when taking it in from cold environment 8 Do not turn on or off the system frequently avoid turning on it for long time 9 Prevent from strong vibration or G shock to the system 10 Prevent other harmful objects from entering the system 11 Keep at least 1 meter between the system and the objects in the lighting 12 Connect the power cable after the system has been installed 13 Turn on the computer after the laser display system is on or you must power on the computer again Page 1 ADDRESS DMX address setup 1 When the 10th code is ON the function of 1 9 codes is the following The 1st code is OF2. voltage matches that off the LASER display system Page 2 3 Ensure the fan and the exhaust is not blocked 4 The LASER display system should be statically fixed 5 It is essential to be earthed well for the sake of safety Back panel Key press function instruction DMX OUT DMX512 signal output DMXIN DMX512 signal input DMX ADDRESS Binary address switch Fan F3AL 250V Input power with internal fuse 3A Page 3 Technical parameters Model MO20RG 4 Parameter 1 LASER diode Red Green 2 Power supply 100 240VAC 50 60HZ 3 LASER power R 650nm 120 150mW G 532nm 40 50mW 4 Scanner angle 18 5 Control mode Sound auto play single pattern by DMX Saving static and dynamic patterns Displaying 6 Peculiarity two effects one is fast another is slow Can be changed by DMX and easy to operate Displaying more than 50 light beams and patterns displaying laser patterns specified by international laser display association such as 7 Effect diffusing laser network Slowly rotating color fan time and space tunnel and fairy flowers Can be programmed with customers 8 Dimensions 432 4 x 202 4 x 117mm Net weight 9 5 3 6 0KG Gross weight Remark On the DMX 512 mode the LASER display system will shut off if the DMX 512 signal intermit Page 4
3. F Sound control mode The 1st code is ON AUTO play mode The 3th code is ON patterns and dots mode 2 When the 10th code is OFF DMX control Maintenance Clean the lens regularly Do not use a wet cloth or chemicals use a damp cloth The maintenance period depends on the usage frequency and surrounding conditions of the LASER display system It is recommended that the system should be cleaned every 15 days Warning Power off any related system before maintenance Declare The end user of this product should abide by the above instructions and warnings Performing actions which was advised not too do so as stated by this manual may void the warranty of this laser display system All products made from Big Dipper Laser Company have anti fake identification please verify the anti counterfeit label at the bottom of the case to ensure the interests of consumers Page 6 DMX channel setting Channel NO DMX512 Content value 0 63 Shut off the LASER diode 1 Control 64 127 Sound mode mode 128 191 Auto mode 192 255 Manual mode 0 39 Static pattern Fatter 40 255 Dynamic pattern 0 30 No strobe a UONE 31 255 Strobe 8 grade speed 0 69 Normal display ii Display 70 255 Dot and line display Horizontal 0 160 Manual move 5 OVE 161 220 Unilateralism move 221 255 Automatic move around 0 160 Manual move 6 Vertical 161 220 Unilateralism move move i 221 255 Aut
4. omatic fluctuate from up to down and down to up 0 2 No zoom 3 90 Manual zoom 7 Zoom 91 146 Automatic zoom out 147 200 Automatic zoom in 201 255 Automatic zoom 0 99 Red and Green 8 Color 100 199 Red 200 255 Green The channel value is 200 or bigger a Reset Den than 200 then the system reset 10 Y axis 0 150 Manual rotation rotation 151 255 Auto rotation 11 X axis 0 150 Manual rotation rotation 151 255 Auto rotation 12 Z axis 0 180 Manual rotation rotation 181 255 Auto rotation Page 5 14 Before powering on the system be sure the power cable is connected into the power socket well 15 Turn off the system for 25 minutes after running constantly for three hours ensure that the system is able to cool down in a suitable environment 16 When to be transported use the original package to avoid damage 17mm This sign indicates separate collection for electronics and electrical equipment Inspection Check that the following components are present within the package when receiving system from the list below 1 x LASER display system 1 x User manual 1 x Power cable 1 x DMX cable option Installation 1 Be sure that there is no flammable or explosive subjects nearby The least clear proximity from the system should be 1 5 meters At the same time keep more than half a meter between the wall and LASER display system 2 Be sure the power socket output
Download Pdf Manuals
Related Search