Home

User Manual - Keytec, Inc.

image

Contents

1. re Touch User s Manual Installation Instructions CONTENTS A Touch Screen and Touch Monitor Installation 1 Introduction 2 Parts list 3 Magic Touch Add On Kits KTMT series mounting 3 1 KTMT 1214 1500 154W 3 2 KTMT 1315 1700 1900 1921 3 3 KTMT 1700W 1900W 2200W 2400W 4 Magic Touch Monitor KTSC KTLC series connection 5 Magic Touch Built In Kits KTT series integration B Controller and Driver Installation 1 Controller installation 2 Install driver on Windows OS 2 1 USB controller 2 2 Serial RS232 controller 3 Install driver on Mac OS C Settings and Options D Touch Screen Functions E Important Information 1 Helpful Notes 2 How to take care of your touch screen products F Troubleshooting amp Technical Support G Warranty information amp Return Policy FCC COMPLIANCE This equipment has been listed and found to comply with the limits for a Class B digital device pursuant to Part 15 Subpart B of FCC Rules This equipment generates uses and can radiate radio frequency energy If not installed and used in accordance with the instructions it may cause interference to radio communications The limits are designed to provide reasonable protection against such interference in a residential situation There is no guarantee that interference will not occur in a particular installation CE and RoHS COMPLIANCE This equipment ha
2. RMA department to get a return authorization number RMA Please email to tech magictouch com or call 972 272 7555 The product must be packed with sufficient protection insured for full value and shipped with freight prepaid If the product is purchased from a KEYTEC dealer please check with your dealer directly about their return policy Page 6 KEYTEC Touch Screen Warranty Registration Card To assure your warranty rights complete and send this warranty card by 1 mail to KEYTEC INC 520 Shepherd Drive Garland TX 75042 USA or 2 scan and email to sales magictouch com or 3 copy and fax to 972 272 7501 or 4 register on line at http www magictouch com WarrantyReg html Privacy Policy We do not disclose the following information to any third party The information hereafter will be used Strictly for the purpose of warranty service only Name Email Organization Address Tel Fax Product Purchased please check Add On Touch Screen KTMT ____ Touch Monitor KTSC or KTLC ___ Built In Touch Screen KTT View Touch ___ OPTIR Touch or Others please specify Part Number Serial Number Purchased from Date EXTENDED WARRANTY I would like to purchase extended warranty please have a sales rep contact me by email _ phone or __ fax Warranty Information Please refer to http www magictouch com warranty html HOW TO OBTAIN WARRANTY SERVICES 1 You must first notify KEYTEC s technical support dept by
3. extension cable and plug it into the controller 1 2 3 5 It is very important to follow the above procedures to avoid accidental damage Continue to section B Controller amp Driver Installation 4 Magic Touch Monitor KTSC amp KTLC series connection 4 1 Connect the monitor to computer as instructed in the monitor s manual which typically involves the power cord and video cable connection Ignore any contents pertaining to touch screens in the monitor s manual 4 2 Connect the touch screen cable from the back of the monitor to the controller Note If the cable is not long enough contact KEYTEC for a custom extension cable Regular telephone cable cannot be used for extension Continue to section B Controller amp Driver Installation 5 Magic Touch Built In Kit KTT series integration Built in kits must be integrated by experienced technicians The integrator will be solely responsible for any damage to the monitor and touch screen kit Physical damage to the touch screen is not covered by the warranty For all standard LAM and CAF1 models the flex tail should be on the left and its alignment mark white dot should match the one on the extension cable The display needs to have minimum of 3 mm or 1 8 space inside for touch screen integration It is impossible to provide a general guideline for integration because different monitor models may have different housing design and wirin
4. sending e mail to tech magictouch com or fax to 972 2 2 501 or calling 972 272 7555 to report the problem 2 If the technical support personnel has determined that your product needs to be serviced you will be given a RMA Return Merchandise Authorization Number for sending your product in for service 3 You must deliver the product freight prepaid in the original package or package with equal degree of protection to the authorized service station as instructed by technical support department The RMA must be clearly marked outside of the package Your return address must be included 4 If the product is out of the warranty you will be quoted for the replacement or repair cost No work will be performed until your approval on all the charges is confirmed WHAT S NOT COVERED 1 Products that have been previously altered repaired or serviced by unauthorized personnel 2 Serial number on the products has been altered or removed 3 Cosmetic damages and physical damages Damages due to improper installation operation or connection to improper voltage supply 4 Any damages due to misuses abuses negligence unauthorized modifications accidents and acts of God 5 Those products which were sold AS IS or WITH ALL FAULTS Join KEYTEC S Facebook for quick access to updates events and special deals Page
5. will then progress to the next one until all 5 or 25 have been touched Use the stylus to perform calibration for better accuracy See C Settings and Options Page 4 2 2 Serial RS232 Controller ProE X Controller Win Vista XP 2000 ME 98 95 NT4 0 Linux If there is a previous Magic Touch driver or other touch screen s driver installed in your system uninstall them first All Windows and Linux drivers are included on one CD and can be downloaded at www magictouch com support_proe_x html For NT 4 0 amp Linux user please see readme file for setup instructions 2 2 1 MUST log on with administrator s password for Vista XP 2000 amp NT 4 0 2 2 2 Insert the setup CD The setup window will display on the desktop Click to select ProE controller Then click Install Windows may require your permission to allow setup to run Note If setup window does not open the CD Rom s autorun may be disabled Click START RUN to run the setup from the driver CD 2 2 3 When the system prompts must reboot Windows to complete the installation plug in the ProE controller to a free Com port click OK to reboot Free Com port means there is no other device configured to use this Com port 2 2 4 After reboot the Detect New Hardware Wizard opens Click next and continue anyway at Digital Signature prompt 2 2 5 Two new icons are created on desktop Touch RS232 Fr Swap Button 2 2 6 Double click TouchRS232 to open tou
6. a board SB model with USB cable USB XD or serial cable ProE X USB5 XD controller is for 5 wire touch screen black color box with green LED 0 0 1 0 1 1 1 1 1 ei ett C CGC lt 1 1 O O 3 Magic Touch Add On Kits KTMT series mounting 3 1 KTMT for notebook computer KTMT 1214 1500 and 154W 3 1 1 Open the cover Remove the protective film on the touch screen and mount the touch screen to the notebook using the Velcro straps picture 1 3 1 2 Buckle the horizontal straps to the back of the notebook picture 2 and pull the two vertical straps down and adhere them to the horizontal strap picture 3 Continue to Section B Controller amp Driver Installation 3 2 KTMT for 4 3 ratio monitors KTMT 1315 1700 1900 1921 with plastic frame 3 2 1 For Mounting on LCD monitor There are two sets of hangers included one pair of hard plastic hangers and one pair of Velcro hangers 3 2 1 1 You may use the plastic hangers Place the touch screen panel on a flat table with the backside facing up Screw two hangers into the back of the panel using the top screw holes on the hanger picture 1 3 2 1 2 Adhere two Velcro strips provided on the top of the display as indicated by the arrows in picture 2 Mount the touch screen to the display picture 3 3 2 1 3 If the top of the touch screen is blocking the view area of the display you may raise the touch screen by adding th
7. ch control panel 2 2 7 Click the Calibration button choose either 5 or 25 point calibration then click GO Touch and hold the center of each circle for a full second to complete the calibration Use the stylus for better accuracy Repeat the calibration if necessary Click OK to close See C Settings and Options 3 Install driver on Mac OS For Macintosh with USB port a quick guide file is included in the CD Plug in the controller to USB port and plug in the touch screen cable to controller 3 1 Insert the installer CD Double click to open the Magic Touch CD icon 3 2 There are 7 folders for OS 9 2 x 10 1 x 10 2 x 10 3 x 10 4x 10 5x amp 10 6x 3 3 Open the folder that matches your OS version see Apple gt About this Mac 3 4 Double click MagicTouch icon to run installation If a LOCK icon appears on the lower left corner click and type in the administrator s password 3 5 After installation is completed restart the computer 3 6 Calibrate the screen For OS 10 x click Go Application Magic Touch Utility Magic Touch For OS 9 x click Apple Control Panel Magic Touch Utility Magic Touch Before entering the calibration screen you will be prompted for lift off mode selection This appears as a check box in OS X In lift off mode the mouse click is activated when touch is lifted from the screen Please see quick guide for details Once the selection is made the calibration screen is shown Touch the centers o
8. dible beep when a touch is sensed Customize the beep s pitch and duration under Beep Options 6 Move only Touching and dragging moves the mouse cursor without performing a click This mode was designed for an optional click pen currently unavailable 7 Hide cursor Makes the cursor invisible preferred for some applications 8 Uninstall Click to uninstall the driver Correct password needed magictouch is the default password 9 Default setting Return the speeds and options to the original settings D Touch screen functions 1 Screen touched left mouse button clicked 2 Touch down and drag left mouse button held down and dragged 3 Tap twice left mouse button double clicked 4 Swap Button Select once to right click on next touch only or always to right click on every touch Select minimize to reduce to system tray as a shortcut Note Using tablet mode in Windows 7 and Vista touch and hold will activate right click E Important Information 1 Helpful Notes 1 1 Place the monitor at an easy to touch position and avoid direct strong lighting to reduce glare on the screen 1 2 It is easier to use the stylus for clicking smaller icons dragging and drawing apply constant pressure when drawing 1 3 Make one point touch only Do not lean your hand on the screen or touch it with more than one finger or stylus 1 4 Increase the size of icon and menu bar for easy touch 1 5 If double click is
9. difficult change to single click in Folder Options 2 How to take care of your Magic Touch product 2 1 DO NOT touch the screen with hard sharp objects 2 2 DO NOT hit or drop the screen 2 3 DO NOT spray any liquid directly to the screen Clean the screen with soft cloth or paper towel dampened with cleaning solution such as Windex alcohol 2 4 DO NOT alter or substitute any parts 2 5 Put the screen into the original packaging for storage and transportation Failure to handle and use this product properly will negate the warranty F Troubleshooting amp technical support Troubleshooting guide is on the driver CD except for Mac version and also available at www magictouch com quide html Request support online at www magictouch com techsupport html or send e mail to tech magictouch com Please include the information about Magic Touch model driver version installed your operating system and the nature of the problems encountered You may also call 972 272 7555 9 5 M F Central Time or contact your local authorized dealer for assistance G Warranty Information amp Return Policy Warranty information can be found on the driver CD and also available at www magictouch com warranty html Register to activate your warranty online at www magictouch com WarrantyReg html or send in the registration card at back cover of this manual If you need to return the product you must first contact KEYTEC S tech support amp
10. e rectangular foam pad underneath the hangers picture 4 3 2 1 4 Alternatively you may use the Velcro hangers picture 5 The soft surface of the Velcro faces up when fastening them with the screws to the frame Mount the touch screen to the display and press the Velcro firmly picture 6 Page 1 3 2 1 5 Must apply the Velcro at bottom of the screen picture 7 to secure the mounting Use the cable clips to secure the touch screen cable picture 8 Continue to section B Controller amp Driver Installation 3 2 2 For mounting on CRT monitor 3 2 2 1 Measure the top frame of the monitor picture 1 If it is 1 5 inches 3 8 cm or less use the top holes on the plastic hangers to screw into the touch screen panel Otherwise use the bottom holes 3 2 2 2 Place the touch screen panel on a flat table with the backside facing up Screw two hangers into the back of the panel picture 2 3 2 2 3 Hang the touch screen onto the monitor in center position Use a pencil to mark the hangers position on top of the monitor picture 3 3 2 2 4 Remove the touch screen from the monitor Adhere two pieces of Velcro strips provided onto the top of the monitor near the pencil marks picture 4 3 2 2 5 Mount the touch screen panel as close to the monitor as possible with the hangers aligned to the Velcro strips picture 5 3 2 2 6 Press down the hangers firmly to fasten the Velcro strips picture 6 3 2 2 7 You must appl
11. er tightness Note Slim LCD and notebook computers usually are not suitable for touch screen integration Page 3 5 5 Pull the touch screen cable out from the back of the monitor Replace the connector if necessary make sure the wiring is correct Note If the cable is not long enough contact KEYTEC for a custom extension cable Regular telephone cable cannot be used for extension Continue to section B Controller amp Driver Installation B Controller and Driver Installation 1 Controller Installation There are three types of controller box USB XD USB 5 amp ProE X as labeled on the controller The SB model controller does not have a box The USB XD or USB 5 4 The ProE X controller should be controller should be plugged fa N plugged into the serial port Com1 into the USB port when or 2 when the computer is instructed by the driver powered off installation steps For the models come with an extension Connect controller to Plug the touch screen cable into the cable connect it between touch screen computer as instructed controller box and controller with white dots aligned above 2 Install driver on Windows OS 2 1 USB Controller USB XD controller Win 7 Vista XP 2000 ME 98 Mac 9 2 2 10 6 x Linux USB 5 controller Win 7 Vista XP 2000 Mac 9 22 10 6x Linux If there is a previous Magic Touch driver or other manufacturer s touch screen driver installed in your system uninstall t
12. f the X or circle depending on the OS with stylus provided for better accuracy to complete the calibration Check the accuracy repeat if necessary Press cancel to exit The Windows and Linux drivers are normally not included with the touch screen sold as Mac version but they can be downloaded at www magictouch com support_usb_xd html for free 9 2 10 4 has 3 X calibration points without multi monitor option 10 5 10 6 has 5 25 circle calibration points with multi monitor option C Settings and Options of Magic Touch Control Panel Windows version 1 Mouse or Tablet When using Windows 7 or Vista there are options of choosing tablet or mouse mode When tablet mode is selected you will be able to use Windows tablet gestures The response speed is relatively slower in tablet mode than in mouse mode 2 Mouse speed Control the tracking speed of mouse cursor 3 Double click speed Control the time interval between two clicks to activate a double click Slow speed makes double click easier Test the double click by tapping the K logo twice If successful the logo rotates 4 Lift Off When this option is enabled the click is activated when touch is lifted away from Page 5 the touch screen This mode is very useful for clicking hyperlinks such as Windows icon set with single click open Internet browser or programs with mouseover event However it is impossible to drag or draw in this mode 5 Beep Enable disable an au
13. g connections The following procedures should be used for reference purpose only Important Test both touch screen panel and monitor before the installation 5 1 Open and remove the housing of the monitor check with your monitor supplier about the warranty policy regarding to this step Clean the monitor surface and the back of the touch screen panel remove the protective film on touch screen 5 2 It is very important to center the touch screen panel to the opening of the monitor s front frame so that the edges of the frame will not contact the active area of the touch screen to prevent shorts caused by constant touching pre load The edges of the frame should rest on the clear insulation border of the touch screen Depending on the structure of the frame foam strips and washers may be needed to add space for preventing shorts 5 3 For service purpose the touch screen should be removable from the monitor Therefore it is not recommended to use double side tape or permanent adhesive to mount the touch screen on top of the display Use high temperature duct tape to mount the edges of the touch screen to the metal frame of the display Add support at the bottom of the touch screen to prevent it from sliding down 5 4 If the monitor does not have enough space to accommodate the thickness of the touch screen do not force the housing to close because it may damage both the touch screen and monitor Do not force the mounting screws beyond fing
14. hem first All Windows and Linux drivers are included on one CD and can be downloaded at www magictouch com support_usb_xd html Multi Monitor setup and examples are under the folder MultiMonitor driver Mac driver CD is included only if you have ordered Mac version USB M or USB WM extra charge applies Mac user please see Sec 3 for instructions Linux user please see readme file in Linux folder for setup instructions 2 1 1 Must log on with administrator s password for Windows 7 Vista XP 2000 2 1 2 Insert the setup CD The setup window will display on the desktop Click to select USB controller Then click Install Windows may require your permission to allow setup to run Note If setup window does not open the CD Rom s autorun may be disabled Click START RUN to run the setup from the driver CD 2 1 3 When the system prompts please plug in the Magic Touch USB to USB port plug in the controller After Windows has found the new hardware click OK to continue 2 1 4 When must reboot Windows to complete the installation shows click OK to reboot 2 1 5 After Windows is rebooted two new icons are created on desktop Je Touch USB p Swap Button 2 1 6 Double click Touch USB icon to open touch control panel 2 1 7 Click the Calibration button choose either 5 or 25 point calibration and click GO To calibrate touch and hold the center of each circle for a full second before lifting your finger The circle
15. s been tested analyzed and found to comply with CE and RoHS requirements DISCLAIMER The material in this document is for an informational purpose and is subject to change without notice The manufacturer assumes no responsibility for errors or omissions in this document Nor are any liability assumed for any damages from the use of this product and the information contained in this document All mentioned product names herein are registered trademarks of the respective companies All rights reserved No part of this document and the software provided with the product may be reproduced or modified without permission of the manufacturer KEYTEC INC www magictouch com Revision M 041210 A Touch Screen and Touch Monitor Installation 1 Introduction Please identify the Magic Touch model you purchased Check all the parts in the package against the following list Follow the installation instruction only for the specific model that you have purchased Improper installation may cause permanent damage not covered by the warranty 2 Parts List Add On Touch Monitor Built In KTMT KTSC KTLC KTT External touch screen Hangers amp accessories set Integrated touch monitor Internal touch screen Magic pen stylus Cleaning cloth User s manual Installation CD Warranty card Controller 1 Notebook models KTMT 1214 KTMT 1500 and KTMT 154W do not have hangers Controller is either a box or
16. y the Velcro at bottom of the screen picture 7 to secure the mounting Use the cable clips to secure the touch screen cable picture 8 it Is ve Continue to section B Controller amp Driver Installation 3 3 KTMT for widescreen display KTMT 1700W 1900W 2200W 2400W 3 3 1 There are two hangers to be assembled on the top of the frame There are 4 ways to assemble the hangers depending on the top frame width of your monitor 3 3 2 Screw through the top 2 holes of the hangers to the frame This mounting should be suitable for most monitors picture 1 3 3 3 If the top frame of your monitor is very wide you can drop touch screen by screwing through the bottom 2 holes of the hangers to the frame picture 2 3 3 4 If the top frame of your monitor is narrow you can turn the hanger over and screw through the top holes of the hanger to the frame picture 3 3 3 5 If the top frame of your monitor is extremely narrow turn the hanger over and screw through the bottom holes of the hanger to the frame picture 4 3 3 6 Adhere the Velcro pads to the bottom of the hangers Remove the wax film from Velcro Unbuckle the bottom Velcro straps 3 3 6 Align and hang the touch screen on the monitor Press the hangers down to make the Velcro adhere to the top of the monitor picture 5 Page 2 3 3 7 Buckle the bottom Velcro straps and secure the touch screen s flex cable to the back of the monitor by Velcro pads picture 6 Connect the

Download Pdf Manuals

image

Related Search

Related Contents

Alarm for above ground pools  Recaro 5003.000.66  Eurotherm User Manual for the 582, 583 and 5831    Who must use the BX 6500/6600 Handbook      RCA DRC630N User's Manual  rgb / component video switcher user guide  Samsung RT40MBMS Инструкция по использованию  

Copyright © All rights reserved.
Failed to retrieve file