Home
www.Aquaglide.net Plunge Slide Owner`s Manual CAUTION
Contents
1. Aqua PLAT l P an A Stop Read this manual carefully before using this product Plunge Slide Owner s Manual It is the owner s responsibility to read the owner s manual and instruct all users in the safe operation of these products By inflating these products you hereby agree to the Release of Liability Claim Waiver and Assumption of Risk Agreement in this manual Please read this manual prior to inflating and using these products and keep for future reference As with any action sport recklessness inexperience misuse or neglect of the equipment may result in serious injury or death Please Do Not Return This Product To The Store For questions regarding assembly parts or warranty contact our customer service department at 1 509 493 4938 or access product information at www aquaglide net Watersports Safety Code Watersports are fun and challenging but involve inherent risks of injury or death To increase your enjoyment of the sport and to reduce your risks use common sense and follow these rules Before you start e Familiarize yourself with all applicable federal state and local laws the risks inherent in the sport and the proper use of the equipment Know the waterways Use caution and common sense Do not use this product except when properly attached to an Aquaglide Super tramp 14 17 or 23 trampoline or to an Aquaglide Rebound 12 or 16 bouncer Do not use in recreational swimming pools
2. Make sure the Plunge is securely attached to the trampoline or bouncer Always check the security of the straps periodically during use 4 Carefully check area under the Plunge for sharp or dangerous objects i e rocks or stumps 5 Keep a safe distance of 15 ft 4 54m from docks boats boat lifts and any other structures DO NOT tie the Plunge to a dock Do Not use the Plunge except when attached to an Aquaglide Supertramp or Rebound Care and Maintenance 1 While your product has been initially treated with UV protectant long term exposure to sunlight will damage the product Regularly apply a UV protectant to the exposed surface of the tube to ensure the life of your product We recommend using ONLY 303 UV Protectant intended for use on vinyl for this purpose Monthly application while the product is in use is required NOT DOING THIS WILL VOID THE WARRANTY 303 UV Protectant is available at most watersports dealers or online at www 303 products com 2 WARNING Certain products especially petrolium based solvents cleaners and protectants such as ArmorAll can damage the product and use of these products will void the warranty 3 WARNING Use of a high pressure washer will damage the product and void the warranty To clean use a soft bristle brush with mild soap and fresh water 303 UV Protectant contains a safe for vinyl cleaner and can be used to clean and protect the product at the same time 4 Check the infla
3. Aquaglide Inc warrants products to be free Dy Misuse abuse neglect or normal wear and rization number RA is given by Aquaglide in of defects in material or workmanship to the fear including but not limited to punctures advance The RA number must be on the outside original purchaser for a period of Three 3 dragging the product over the ground damage of the package or it will not be accepted at our years from date of purchase This warranty due to excessive sun exposure or seam failure warehouse Freight on the returned product must is subject to the following limitations due to overinflation in the sun damage caused by be prepaid or it will not be accepted Upon receipt improper handling and storage damage caused by Aquaglide will make a determination within 30 1 Warranty is valid only with dated proof of pur use in waves or shore break and damage caused days If the product is covered under warranty it Pal by anything other than defects in materials and will be returned to the customer at the expense of chase in the form of the original invoice workmanship Aquaglide Inc after repairs can be made If not SEEN the customer will receive a quote for repair and e a E E os 6 This warranty is voided if any unauthorized or replacement as well as any necessary cleaning repair change or modification has been made to and shipping charges The customer will have any part of the equipment Authorization for such 30 days to accept
4. Contents PVC Patch material PVC Glue Instructions 3 Additional items that MAY be needed Air pump Sharp scissors and or razor knife Dish washing liquid water small bowl or i bottle 120 Grit sandpaper solvent such as MEK Methyl Ethy Ketone or Rubbing alcohol china marker small chip brush or disposable paint brush LOCATE LEAK S 1 i there is a problem with air leaks you will need to locate the leak s irst 2 Inflate eki uaglide Platinum product fully Some small leaks can close themselves at lower air pressures so it is best to maintain full pressure by re inflating periodically while checking for leaks 3 Use a soapy water solution 50 50 dish soap amp water and a cloth to check for leaks Work slowly around the product Spraying or swabbing on soapy water solution Look for growing bubbles which indicate a leak 4 a leak is confirmed dry the area well mark it and prepare to patch PATCHING Reinforced PVC Patch with high grade adhesive IMPORTANT leaks must be patched with the item completely deflated and patches must be allowed to cure for 24 hours 1 DEFLATE your Aquaglide Platinum product completely 2 ae cut PVC patch material to size using sharp scissors or razor nife a Patch should be least 3 5cm 1 2 larger than hole IN ALL DIRECTIONS around any air leak This means a minimum patch size of 5cm x 5cm 2 x 2 for a pinhole leak The larger the better b
5. swim under this product Do not jump or dive from this product Do not exceed the manufacturer s recommended number of users for this particular product Do not use while under the influence of alcohol or drugs Read Operator s Manual before use Made in China Watersports can be safe and fun for all levels of enthusiasts The Operator s Manual is presented to enhance your enjoyment of the sport It is intended to alert you to some of the potentially dangerous conditions that can arise in all watersports It is the owner s responsibility to read the owner s manual and instruct all users in the safe operation of these products By inflating these products you hereby agree to the Release of Liability Claim Waiver and Assumption of Risk Agreement in the Owner s Manual To reduce the risk of injury or death follow these guidelines Carefully read the product Owner s Manual and follow the instructions Take all reasonable precautions in the use and operation of your trampoline and or aquapark Teach anyone using your trampoline and or aquapark about safe guidelines prior to use Know your own limits Stop when you are tired Act responsibly Be in good physical condition and be cautious in your use of this or any other water sports product e Periodically check mooring bridles and or lines to ensure safety Replace any portion of mooring and or connection system that shows signs of wear Do not add any h
6. within 3 0 m 10ft of commercial pool edge or within 4 5m 15ft of boats docks or other hard obstructions Do not attempt or allow somersaults Landing on the head or neck can cause serious injury paralysis or death Do not dive head first or swim under this product Never use at night or in low light conditions Never use in poor weather conditions with excessive wind waves or lightning Do not use on dry land Do no use without proper anchoring Take extreme care when swimming between the shore and the product Be cautious of any boat traffic or other obstructions Ensure all users are capable swimmers and are not excessively fatigued Do not allow anyone to attempt to swim to or from the product that are not physically able to do so Always ensure that the swimming area around the trampoline is free of submerged logs rocks and sandbars Ask about the local water conditions before use Only allow use of the product with proper supervision Secure the product when not in use to prevent access by any other users Do not jump or dive from this item Do not jump onto this item from any other item Do not use in water where there are sharks or other animals that could pose a threat to humans If product is used indoors always ensure adequate ceiling height overhead Always remove personal items such as rings watches or other sharp objects before use Your equipment e Check all equipment
7. Square patches with rounded corners are usually best as this reduces the risk of peeling 3 Dry fit the patch over the area to be repaired to ensure good fit and coverage 4 Use a clean 120 grit sand a to rough up the surface to be patched AND ALSO the back of the patch material Aquaglide Inc 1 North Shore Dr SE White Salmon WA 98672 TEL 01 509 493 4938 FAX 01 509 493 4966 Repair instructions 5 Use solvent MEK or Rubbing Alcohol and a fresh cloth to clean the sanded areas removing all debris 6 Dry fit the patch again and use china marker provided to carefully outline where the patch will be located 7 Next use the glue provided Use a disposable chip brush to spread glue if needed Try to work neatly and quickly a Using disposable brush apply a thin even a of glue to the repair area making sure to cover the area completely Stay INSIDE the china marker outline b Using disposable brush apply a thin even layer of glue to the to the back of the patch making sure to cover the area completely c Allow glue to cure for approximately 60 seconds d Starting at one corner carefully align the patch over the repair area using the china marker outline as a guide Once the 2 surfaces touch the bond will be immediate so take care e arm at one corner and working outward carefully apply the patch to the repair area using very firm pressure f Rub the entire patch area and the edges of the patc
8. ardware or attachments not otherwise supplied by the manufacturer THE WARNINGS AND PRACTICES SET FORTH ABOVE REPRESENT SOME COMMON RISKS ENCOUNTERED BY USERS AND DOES NOT PURPORT TO COVER ALL INSTANCES OF RISK OR DANGER PLEASE USE COMMON SENSE AND GOOD JUDGMENT Please contact the dealer or manufacturer of this product if you have any questions about proper selection function or safe use of this product M Made in China Aqua Plunge Slide PAT ae AQUAGLIDE INC WHITE SALMON WA U S A STANDARDS EN 15649 2012 W A S 0 055bar PRODUCT PLUNGE SLIDE 0 8psi MADE IN P R C DESIGNED IN U S A No protection against drowning Keine Schutz gegen Ertrinken Pas de protection contre la noayada No protege contra el ahogamiento Nessuna protezione contro l affogamento Beschermt niet tegen verdrinken Only for swimmers Nur f r schwimmer Seulement pour les nageurs Solo para nadadores Solo per i nuotatori Alleen voor zwemmers Aquaglide Inc N L 201 cm 79 1 North Shore Dr SE RN W 165 cm 65 White Salmon WA 98672 N H 135 cm 53 USA Compliant with DIN EN 15649 2012 A WARNING Prolonged exposure to salt water can damage and or shorten the expected lifetime of this product The marine environment includes many damaging elements including corrosion abrasion and damage from marine life such as barnacles Regular cleaning and rinsing with fresh water can reduce the
9. cy this number when you contact Aquaglide or your Product can be returned only if a return autho dealer with any warranty claim 4 If a product is deemed to be defective by Aqua 5 This warranty does not cover damage caused Aquaglide Inc 1 North Shore Dr SE White Salmon WA 98672 TEL 509 493 4938 FAX 509 493 4966 www Aquaglide net
10. e face in sitting position This item is not designed for independent use Use ONLY when attached to a properly anchored Aquaglide Platinum main feature item 2 When connecting multiple items use only Aquaglide Interloc straps and connecting rings according to the Interloc Strap instructions provided Make sure that the connection is tight and that there is NO GAP greater than 25mm 3 4 between items IMPORTANT Failure to connect these items properly may result in injury or death Plunge Strap Assembly Instructions 1 Thread the end of the webbing strap through the two D Rings on the top side of the plunge then back through a single ring Leave about 6 of webbing at the end 2 Feed the webbing around the circumference of the tube over the frame bar down the inside underneath the tube bottom and up the outside 3 Feed the end of the strap through the two D rings in the middle of the slide then back through a single ring 4 Repeat steps 1 3 for the strap on the other side 5 Finish by tightening the straps on both sides taking up any loose webbing and secure the slide in place for more information go to Aquaglide Inc 1North Shore Dr SE White Salmon WA 98672 TEL 509 493 4938 FAX 509 493 4966 www Aquaglide net 3 Place the Plunge in at least 8 ft 2 44m of water depth and in an area protected from the wind and boat traffic Review your lake rules and restrictions with your local authorities
11. ext of kin may suffer as a result of the use of this product due to any cause whatsoever including negligence or breach of contract on the part of North Sports Inc and Aquaglide Inc in the design or manufacture of this product and any of its components ARBITRATION In further consideration of the sale to you of this product and any of its components you hereby agree to submit to binding arbitration any and all claims which you believe you may have against North Sports Inc and Aquaglide Inc arising from the use of any North Sports Inc and Aquaglide Inc equipment or products The arbitration shall be pursuant to the rules of the American Arbitration Association Arbitration shall be commenced within 1 year from the date on which any alleged claim first arose Further the arbitration shall be held in White Salmon Washington unless otherwise mutually agreed to by all parties The submission to the American Arbitration Association shall be unlimited and the arbitration award may be enforced by any Court of competent jurisdiction BINDING EFFECT OF AGREEMENT In the event of your death or incapacity this Agreement shall be effective and binding upon your heirs next of kin executors adminis trators assigns and representatives ENTIRE AGREEMENT In entering into this Agreement you are not relying upon any oral or written representations other than what is set forth in this agreement and the North Sports Inc and Aquaglide Inc Owner s Manual
12. h using very firm pres sure g Allow to cure for at least 24 hours before inflating www Aquaglide net NOTICE Release of Liability Claim Waiver and Assumption of Risk Agreement By opening and assembling this product you are agreeing 1 to be bound to the terms set forth below and 2 to require anyone using this product to be bound by such terms If you are unwilling to be bound by these terms return this product before use for a full refund ASSUMPTION OF RISK Use of this product and any of its components involves certain inherent risks dangers and hazards which can result in serious personal injury and death In using the product you freely agree to assume and accept any and all known and unknown risks of injury while using this equipment The risks inherent in the sport can be greatly reduced by abiding by the Warning Guidelines listed in this Owner s Manual and by using common sense RELEASE AND WAIVER OF CLAIMS AGREEMENT In consideration of the sale of the product to you you hereby agree to the fullest extent permitted by law as follows TO WAIVE ANY AND ALL CLAIMS that you have or may in the future have against North Sports Inc and Aquaglide Inc its distributors and dealers resulting from use of this product and any of its components TO RELEASE North Sports Inc and Aquaglide Inc from any and all liability for any loss damage injury or expense that you or any users of this product may suffer or that your n
13. prior to use Inspect your product for missing defective or worn parts Always check for proper inflation before each use Temperature and environ mental changes can cause changes in tube pressure Using the product over or under inflated is dangerous and can cause damage to the product voiding the warranty Always check security of the anchor and all attachments before each use Always wear a life vest PFD as required by the authorities in area of use THE WARNINGS AND PRACTICES SET FORTH ABOVE IN THE WATERSPORTS SAFETY CODE REPRESENT SOME COMMON RISKS ENCOUNTERED BY USERS THE CODE DOES NOT PURPORT TO COVER ALL INSTANCES OF RISK OR DANGER PLEASE USE COMMON SENSE AND GOOD JUDGMENT Please contact us if you have any questions on the proper selection function or safe use of this product Contents Plunge 1 Plunge slide 2 Interloc Straps 1 Repair Kit A WARNING USE OF THIS PRODUCT AND PARTICIPATION IN WATERSPORTS INVOLVES INHERENT RISKS OF INJURY OR DEATH This product should never be used by children except under adult supervision Not intended for use by children under 5 years of age This product is not a personal flotation device Always wear a floatation vest PFD as required by the authorities in area of use Never place wrists or feet through handles Do not use in shallow water less than 8 ft 2 44 m deep Do not use within 15ft 4 5 m of shore docks pilings or other hard objects Never
14. se risks A PVC safe antifouling paint should be used to help protect this product against marine growth DAMAGE CAUSED BY EXPOSURE TO SALT WATER IS NOT COVERED BY WARRANTY Aqua Plunge Slide Owner s Manual P L A T l er Pe Assembly 1 Locate a flat dry area with access to electrical outlet or extension cord 2 Unroll and place the Plunge on the ground next to the tramp or bouncer 3 Using a high output pump place the inflation hose with proper adaptor into the Main Valve to inflate the Slide Inflate to 0 8 psi 0 055 bar Check for proper air pressure using a manometer Inflation times can vary by infla tor but the slide should be firm and tight when completely inflated In hot weather be sure to leave room for air expansion or let air out if it becomes too hot DO NOT OVER FILL After inflation screw the valve cover on tightly be careful to align the threads of the cover to avoid stripping 4 Attach the Plunge to the tramp or bouncer using the two long webbing Interloc straps as shown in the diagram below 5 Do NOT drag the Plunge or any other Aquaglide product into the water Carefuly carry the products into the water to prevent punctures and leaks Warning Do not use an air compressor to inflate tube Air compressors are designed for high pressure inflation and can cause the Plunge slide to burst if over inflated Operation 1 This item is a water slide Users board the top of the item and slide down th
15. the quotation At the end of 30 must come in writing from Aquaglide days or upon refusal of the quote Aquaglide will return the product in the condition in which it was 7 The warranty for any repaired or replacement received at the customer s expense The customer cover use in schools or rental operations Warranty term for commercial use is 1 year 3 Aquaglide will make the final warranty determi nation which may require inspection and or photos equipment is good from the date of the original agrees to authorize Aquaglide Inc to charge the ofthe Pr in Geary show dels We purse a customer rd card fo any cs na covered choice freight prepaid or by email to warrany under the terms and conditions of the Aquaglide aquaglide net 8 Any warranty claims must be accompanied Warranty by the original purchase receipt The name of the 7 retailer and date of purchase must be clear and Serial Number glide the warranty covers the repair or replacement legible All Aquagiide Platinum products are marked with of the defective product only Aquaglide will not l l a serial number near the main inflation valve 1 be responsible for any costs losses or damages 9 There are no warranties which extend beyond The serial number may be stamped into the PVC incurred as A resultof loss of use of pro duct the warranty specified here directly around the valve or it may be visible on a welded plate near the valve Please include Returns and Service Poli
16. tion of your tube often Check for proper air pressure using a manometer It may appear to have lost air early in the morning but will expand once the sun warms it Maximum expansion will occur in the heat of the day Proper inflation is important as this will discour age rodents from chewing and prevent damage from wear Storage 1 Before storing place the Plunge ona clean level area Clean with mild soap and water and allow to dry completely Apply 303 Protectant to the surface of the Plunge before deflating 2 Remove ALL of the air from the tube using the deflation end of the high output inflator deflator If some air is left in the tube it may freeze caus ing cracking 3 Fold in thirds and gently roll toward the valve 4 Store the Plunge out of direct sunlight and protected from the environ ment in a clean dry location It is best to store inside a container with moth balls to prevent damage from rodents NEVER store uncovered in a damp location or on a concrete surface NEVER store at tempera tures below 40 degrees F Aquaglide Inc 1 North Shore Dr SE White Salmon WA 98672 TEL 509 493 4938 FAX 509 493 4966 www Aquaglide net Aqua o P L AT we Re WORK SPACE AND TOOLS 1 Take care to position yourself in a clean dry area with re ventila tion For proper curing of adhesives temperature should remain above 10 C 50 F In most cases you will need enough room to inflate the product 2 Repair Kit
Download Pdf Manuals
Related Search
Related Contents
Philips Corded telephone CORD128B 3105C - Alfa Instrumentos Consejos para conducir bajo la lluvia AS16-ES-2010-04-15 Extron MTP 15HD A Series Setup Guide Manuale Tecnico Raccorderia a Pressare Whirlpool 6ED20PK Refrigerator User Manual IBM Partner Pavilion T400F Switch User Manual NERO-QUIM GRIS - Expoquimica, SL Productos Químicos para Copyright © All rights reserved.
Failed to retrieve file