User`s Manual
Contents
1. Raz Rehab Shower Chairs AT Model User s Manual A guide to help users and caregivers in the safe usage and maintenance of Raz Rehab Shower Chairs 20090122 SAFETY PRECAUTIONS Failure to comply may cause injury or damage It is important that the user s and or the caregivers of the user s read and thoroughly understand the User s Manual If there are any parts of the User s Manual that are not understood clarification should be sought prior to using the product Up to date manuals are available online at www razdesigninc com For clarification of any section of this manual call the dealer that provided your Raz Rehab Shower Chair If the dealer is unable to address certain concerns or questions contact the Canadian distributor or the manufacturer IN CANADA Dynamic Health Care Solutions Bolton Ontario Canada 905 951 8541 866 875 2877 info dynamichcs com IN THE U S A Raz Design Inc Toronto Ontario Canada 1 877 720 5678 info razdesigninc com CHAIR CLASSIFICATION BASED ON MAXIMUM USER WEIGHT AT 300 Ibs 136 kg SAFETY WARNINGS TO CONSIDER FOR USE PURPOSES Forward Stability The front 5 casters on all models are equipped with dual locks The step on lever activates both the roll lock and the swivel lock It is essential that all casters on the shower chair be in the outward position before engaging the locks for optimal forward and lateral stability If so equip2. CLEARANCE HEIGHT Under Pan 12 16 1734 21 FIXED BACK Standard Fixed Height Flip Up Armrests 17 back height Z505 20 back height Z506 ADJUSTA BACK Optional Adj Ht Angle Flip Up Locking Armrests 17 back height 2510 24 back height 2520 ARMREST HEIGHT 20 back height 2515 8V Z505 91 Z506 7 94 Z510 8 10 Z515 8 10 Z520 WIDTH BETWEEN ARMPADS 18 LATERAL SUPPORT adjustment range 114 22 offset 2 vertical 1 fore aft 5 pad angle FOOTREST ADJUSTMENT from seat to footplate 16 20 2705 18 22 Z707 CASTER TYPE AND SIZE Dual locking 5 casters x4 OVERALL WIDTH 22 w std armpad 25 2 w Z715 armpad OVERALL LENGTH WHEN UPRIGHT Without footrests 3312 With footrests 4314 OVERALL LENGTH WHEN TILTED Without footrests 41 With footrests 511 WEIGHT CAPACITY 300 lbs PRODUCT WEIGHT 65 Ibs FRAME AND HARDWARE MATERIAL Stainless Steel Raz AT User s Manual 20090122 LP Adjustable 2 0 USE AND OPERATION IMPORTANT ADJUSTMENTS SHOULD NEVER BE ATTEMPTED WITH THE USER IN THE CHAIR 2 1 Tilt Function The Raz AT Shower Chair tilts up to 40 to provide comfort and pressure relief for the user Two gas assisted springs facilitate this operation for attendants
3. Adjusta Back To adjust the Adjustable Tension Back Upholstery each strap can be tightened or loosened at the buckles to achieve a wide range of positions For example the second and third straps from the bottom can be tightened further to create more pronounced support in the lumbar area of the back The looser the straps of the back upholstery the more the fabric will sling into the chair Raz AT User s Manual 20090122 To remove the Adjustable Tension Back Upholstery release the buckles on the straps NOTE The bottom strap should be fastened below the armrest weldment on the back frame In order to remove some straps it may help to raise the armrests 2 5 Molded Seat The unique seat on all Raz AT Shower Chairs was designed to help stabilize the pelvis and contoured for pressure reduction The seats are made from a soft integral skin foam and are available in four configurations 16 deep open front 16 deep bridged front a 19 deep open front and 19 bridged front Also available is an upgrade pressure reduction seat for maximum comfort The PRx seats are available in 16 and 19 seat depths each with 5 configurations bridged front open front left opening rear opening and right opening The seat is an element of the unique Ischial Pelvic Alignment System IPAS it provides 2 of fore and aft adjustment and readily locks in place for transfers but also removes easily for cleaning Optional spacers for anterior
4. in conjunction with lock washers Locknuts that are removed for any reason should be replaced rather than re used The fasteners should be checked periodically to ensure a secure fit IMPORTANT A QUALIFIED RAZ DEALER SHOULD BE CONTACTED TO CHECK ALL FASTENERS CASTER AND WHEEL LOCKS HARDWARE AND ALL OTHER MOVING COMPONENTS AT LEAST ONCE PER YEAR Raz AT User s Manual 15 20090122 3 0 CLEANING AND MAINTENANCE 3 1 Cleaning After Each Use Commode Pan 1 Remove the Commode Pan and empty its contents 2 Wash the pan with a multi purpose disinfectant cleaning solution Use a toilet brush if needed 3 Rinse well before storage or re use Note A soapy hot water wash followed by a disinfectant spray can be substituted for a multi purpose disinfectant cleaning solution Molded Seat 1 Spray with a multi purpose disinfectant cleaner and scrub with a soft brush as required 2 Rinse with a water spray before storage or re use DO NOT IMMERSE the shower chair seat in water or cleaning solutions 3 For a more thorough cleaning remove the seat from the shower chair to allow better access to the underside of the seat around the opening or aperture area of the seat See section 2 5 for seat removal instructions 3 2 Cleaning As Needed Adjustable Tension Back Upholstery 1 Remove the plastic buckles and tri glides from the back upholstery straps paying attention to how the straps are wound through each component as they ar
5. IMMEDIATELY THE DEALER THAT PROVIDED THE SHOWER CHAIR MUST BE CONTACTED SO THAT REPAIRS CAN BE MADE PRIOR TO USING THE CHAIR IT MUST BE MADE CLEAR TO THE DEALER THAT THE SHOWER CHAIR IS IN NEED OF MAINTENANCE AND IS UNAVAILABLE FOR USE UNTIL REPAIRS HAVE BEEN UNDERTAKEN AND ALL PROBLEMS RESOLVED IF FOR ANY REASON YOUR DEALER DOES NOT RESPOND ADEQUATELY PLEASE CONTACT RAZ DESIGN BY EMAIL info razdesigninc com BY PHONE 1 877 720 5678 Raz AT User s Manual 4 20090122 USER S MANUAL TABLE OF CONTENTS Page 1 0 GENERAL INFORMATION 1 1 Raz Rehab Shower Chair AT Model Overview oooococcccnnocccccccocccccccnnanccnnnnancnnnnannnncnnnnns 6 1 2 Raz Rehab Shower Chair AT Model Specifications oooonoccccnniccccnnnnccccccnnnaacccnnnns 6 2 0 USE AND OPERATION O A lac esanauesoes Gscet TE nanev pues wpes E ETE T 7 2 2 Fixed Back Backrest ceim is a e 7 2 3 Adjusia Back Backrests jiu siccieviaietesduceakuoenusetadaoinebareedhaeebncald actath ideal haan eae S 7 2 4 Adjustable Tension Back Upholstery ccceccccessseeeeneeeeeeeeeeeeeeseneeeeeeeseeeeseeseeeeeees 8 23 WGI SC rate ie a e ectess ehems eee ea Bg te need ecmenaacdee 9 2 07 Molded Headrest olona idad aiaia tiaia 10 2 7 Adjustable Footrests A ee 10 PB Casteran Seat ee a eles a a a cee a 11 2 9 Directional Caster Lick be 11 2 10 TILASSIST POG aires t saigontuebbiva tant overs belaacothaneniGeakaybavtact cealy TAARE E E ee aat 11 e 12 2 12 OG AUS tico 12
6. in a Raz AT Shower Chair in any other manner than by an attendant ALWAYS CHECK THAT THE RAZ AT SHOWER CHAIR IS STABLE BEFORE IT IS OCCUPIED BY ANY USER AT ANY TIME Immersion The Raz Shower Chair is not designed to be used as a pool chair Do not immerse the shower chair in whole or in part in water or any other liquid otherwise damage to the shower chair components may result Transfers The most dangerous part of using any shower chair is the transfer Since every chair has different stability characteristics it is essential to carefully review and test the transfer technique to ensure that the procedure is safe Test transfers should be performed with an attendant who can prevent the chair from tipping or moving during the transfer If you feel that the transfers cannot be repeatedly performed safely contact a physical or occupational therapist who is familiar with transfer techniques and options Individuals who have not learned proper transfer skills must seek assistance during transfers and may require the use of a mechanical lift Transferring onto a Raz AT Shower Chair ALWAYS lock all four casters in their outward position front casters positioned in the forward position rear casters positioned to the rear for maximum chair stability Caster locks DO NOT and CANNOT prevent the casters from sliding and the shower chair from moving if the floor is slippery A slippery floor can be caused by dust water soap or any substa
7. or ordered by mail For Clarification of any section of this manual contact a local Raz dealer the Canadian distributor or the manufacturer IN CANADA IN THE U S A Dynamic Health Care Solutions Raz Design Inc Bolton Ontario Canada Toronto Ontario Canada 905 951 8541 866 875 2877 1 877 720 5678 info dynamichcs com info razdesigninc com Raz AT User s Manual 19 20080804
8. position To engage the Directional Caster Lock 1 Ensure that the casters dual locks are not activated and that each caster can swivel and roll freely 2 Pull the shower chair rearward until the rear casters swivel to their forward positions directly under the frame tube 3 Flip the directional lock guide latch down to its on position so that it cradles and holds the caster in the forward position NOTE If the caster is not perfectly in line with the frame the spring loaded latch once activated will engage if the rear caster is slowly swung around To disengage the Directional Caster Lock flip the spring loaded latch up to its off position IMPORTANT ALWAYS RELEASE THE DIRECTIONAL LOCK AND SWIVEL ALL FOUR CASTERS TO THEIR OUTWARD POSITION LOCKING THEM FOR MAXIMUM STABILITY BEFORE EVER TRANSFERRING A USER 2 10 Tilt Assist Pedal A Tilt Assist Pedal can be ordered with the Raz AT Shower Chair to facilitate tilting the chair for attendants The Tilt Assist Pedal can be mounted on either the left or right side depending on the attendant s preference The installation of a Tilt Assist Pedal should be performed by a qualified technician Raz AT User s Manual 11 20090122 2 11 Lateral Supports Raz Shower Chairs may be fitted with optional lateral supports Lateral Supports are designed to assist a user in maintaining an upright posture in the Raz Shower Chair One or two Lateral Supports may be m
9. 2 AMOS ed aldeanos cel 13 2 14 Chest Positioning STA srasat Ns 13 2 15 PolviG Positioning Mii ERE 14 2 16 MPa A a 14 2217 FICCI LOOPS A tables 14 218 Commode PAM island ce 14 219 FRASTONIGUS PROC OOO aran a E E ae esau a EAA abcde a NES 15 3 0 CLEANING AND MAINTENANCE 3 1 Cleaning After Each Use ci co ocak ala laces uaaaguceapederteceontieeteeataae 16 Commode PAN coc asthe iS td e Eo 16 Molde d Sata o io sides tao 16 3 2 Cleaning As Needed cocos rrte da 16 Adjustable Tension Back Upholstery c ccccccceeeeeeeeeeeseeeeceeeeeeeeeeeeeeeeeeeeeeeeeneeees 16 Frame Armrests Adjustable Footrests and Other Component ccccconocccccccncccccccnnns 16 3 3 Suggested Cleaning ProductS ooococcnnnnnccccnnoncccccnnnconcnnnnnnnancnnnnnnnncnnnnnnnnnnncnnnnennnnnnns 17 4 0 LIMITED WARRANTY veena ia daa 18 507 CONTACTS serian dani 19 Raz AT User s Manual 20090122 1 0 GENERAL INFORMATION 1 1 Raz Rehab Shower Chair AT Model Overview Molded Headrest Hand Grips Adjustable Tension Back Upholstery Trigger Locking Flip Up Armrest Molded Seat Commode Pan Adjusta Back Seat Post Adjustable C UY Caster Dual Lock 1 2 Raz Rehab Shower Chair AT Model SPECIFICATION TILT FUNCTION pecifications Gas spring assisted up to 40 tilt range Under Frame SEAT WIDTH 18 SEAT DEPTH 16 or 19 SEAT ADJUSTMENT Up to 2 fore aft SEAT HEIGHT front seat to floor 21 25
10. CIAN ALL ADJUSTMENTS PERFORMED MUST NOT IMPEDE THE OPERATION OF OTHER COMPONENTS 2 12 Leg Adductors Leg Adductors are available as an option on Raz AT Shower Chairs Leg Adductors are recommended for users who need assistance with leg positioning For transfers the adductor pads can be removed entirely Leg Adductors have a comfortable 6 x5 molded foam pad and are multi axis adjustable to meet users unique needs To insert the Leg Adductors 1 Loosen the tri lobe knob on the adductor clamp mounted on the side of the chair frame Insert the leg adductor mounting post into the clamp Move the adductor pad to the desired height for the user Tighten the tri lobe knob Repeat steps 1 to 4 for the other Leg Adductor if necessary aan To e the Leg Adductors Loosen the tri lobe knob on the Leg Adductor clamp mounted on the side of the chair frame 2 Reposition the adductor pad to a height suitable for the user 3 Tighten the tri lobe knob 4 Repeat steps 1 to 3 for the other Leg Adductor if necessary To remove the Leg Adductors loosen the tri lobe knob and lift the adductor out of the adductor clamp on the frame Raz AT User s Manual 12 20090122 2 13 Armrests The Raz AT Shower Chair comes standard with a Fixed Back and flip up padded armrests Any chair ordered with an Adjusta Back will have locking flip up armrests and a range for armrest height and angle adjustment to suit the users needs Also availabl
11. and make the tilt smooth for the user To tilt the chair the attendant must squeeze both tilt triggers and move the chair into the desired angle To lock the chair in place the triggers are released Directly after the purchase the triggers and springs may seem stiff This stiffness is normal and diminishes with use Some attendants may feel the need for a Tilt Assist Pedal which enables the attendant to place one foot on the lever to facilitate tilting The tilt function must only take place when the casters are locked NOTE When the chair is mounted at the lowest height setting the maximum potential tilt angle is 40 The higher the chair is set the fewer degrees the chair can be tilted back e g with a seat to floor height of 25 the chair can be tilted back 36 IMPORTANT DO NOT ATTEMPT TO TILT A RAZ SHOWER CHAIR IF THE ATTENDANT IS PHYSICALLY INCAPABLE OF SAFELY AND SMOOTHLY OPERATING THE TILT MECHANISM WITH A USER OCCUPYING THE CHAIR ANY ATTENDANT MUST BE FAMILIAR WITH PROPER TILTING TECHNIQUES PRIOR TO ASSISTING A USER IN THE SHOWER COMMODE A PELVIC STRAP IS RECOMMENDED FOR ANY USER AS AN EXTRA SAFETY PRECAUTION 2 2 Fixed Back Backrest The Raz Shower Chair has two back types to choose from during ordering a standard Fixed Back and an optional Adjusta Back The Fixed Back can be set at a 85 90 or 95 angle The armrests on this back type are mounted at one height and angle but flip up for transf
12. b Shower Chair The warranty does not apply to products modified without Raz Design s express written consent This includes but is not limited to modification through the use of unauthorized parts or attachments products damaged by reason of repairs made to any component without the specific consent of Raz Design or to a product damaged by circumstances beyond Raz Design s control Only Raz Design will have the authority to determine whether or not the circumstances are eligible for warranty coverage The warranty will not apply to problems arising from normal wear or failure to adhere to the instructions contained in this manual The foregoing warranty is exclusive and in lieu of any other warranties whether express or implied including the implied warranties of merchantability and fitness for a particular purpose The sole remedy for violations of any warranty whatsoever will be limited to repair or replacement of the defective product in compliance to the terms contained in this document The application of any implied warranty shall not extend beyond the duration of the express warranty provided herein Raz Design will not be liable for any consequential or incidental damages to part or whole of a Raz Rehab Shower Chair Raz AT User s Manual 18 20080804 5 0 CONTACTS It is important that the Raz Rehab Shower Chair be properly assembled and all adjustments be made carefully Up to date manuals can be downloaded from www razdesigninc com
13. cro facing towards the chair center the strap horizontally between both footrest hanger tubes and wrap the loop Velcro around the tubes until it engages with itself To adjust the H Strap 1 Disconnect the Velcro from the back of the H strap and adjust to sling or tighten the H strap to suit the users needs 2 Press firmly on the Velcro to secure the H strap prior to use 2 17 Heel Loops Heel loops can be attached to one or both footrests on any Raz Shower Chair They provide added support and comfort for the user especially when in a tilted position 2 18 Commode Pan The Raz Commode Pan was designed with an elongated form that fits directly under the seat to minimize backspray A unique splash reduction ridge is located at center of the pan The high gloss surface facilitates cleaning and rinsing while the pouring spout and handle facilitate emptying the contents Removal of the Commode Pan is achieved by sliding the pan rearward NOTE When re inserting the pan ensure that the pan clicks into the stainless steel brackets and is centered under the seat aperture If the brackets do not hold the pan under the seat securely squeeze the metal brackets inward for realignment Raz AT User s Manual 14 20090122 2 19 Fasteners All fasteners locknuts screws and washers should be checked periodically to ensure that they are snug and do not pose risk to the user All nuts used on your Raz Shower Chair are locknuts or are used
14. e are 314 wide Molded Flat Armpads and Molded Arm Troughs as alternatives to the standard 21 wide armpads On chairs with an Adjusta Back the armrests are height adjustable within a 3 range in Y increments The armrests can be adjusted in height from 7 to 9 with the 17 Adjusta Back and from 8 to 10 with the 20 and 24 Adjusta Backs The armrest angle can be adjusted up 5 or down 5 if the backrest angle is adjusted from the 90 factory position on Adjusta Backs only To flip up the locking Armrests release the arm lock by lifting the blue trigger underneath the armrest tube and lift up the armrest IMPORTANT ARMRESTS ON RAZ AT MODELS ARE NOT INTENDED TO SUPPORT THE ENTIRE BODY WEIGHT OF AN INDIVIDUAL TOO MUCH WEIGHT MAY CAUSE DAMAGE TO THE ARMRESTS OR MAY CAUSE THE CHAIR TO TIP 2 14 Chest Positioning Strap An optional one piece Chest Positioning Strap can be attached to any Raz Model The back upholstery includes loops that are intended as strap guides To install the Chest Positioning Strap 1 Insert one side of the strap through both back upholstery loops 2 With the user seated in the chair thread one end of the strap through the plastic loop on the other end of the chest strap 3 Secure the strap in front of the user with the Velcro closure To adjust the Chest Positioning Strap 1 Open the Velcro on the strap 2 Tighten or loosen the strap around the use
15. e removed 2 Remove the back upholstery from the back frame and machine wash with a mild detergent in warm water on a normal or gentle wash cycle Include the H strap pelvic and chest straps if they were ordered with the chair and require cleaning 3 Install the back upholstery and other positioning straps on the chair and allow to dry DO NOT dry the back upholstery in a clothes dryer or damage to the upholstery may occur 4 Install the back upholstery on the back frame and assemble all plastic buckles and tri glides onto the straps 5 Adjust the back upholstery straps to the desired tension Frame Armrests Adjustable Footrests and Other Components 1 Spray the frame and components with a multi purpose disinfectant cleaner and scrub with a soft brush and rinse with water 2 If necessary spray the frame and components with a diluted 10 parts water to 1 part solution calcium lime removal solution scrub with a soft brush and rinse thoroughly with water DO NOT mix a calcium lime remover with any other liquid or toxic fumes may result It is recommended that a qualified Raz dealer check over all fasteners and subassemblies on a continuing basis or if there is cause for concern to the shower chair s performance It is highly recommended that the rinsing of Raz Shower Chair components occur in a well drained area with an industrial steam cleaner e g Intersteam or a commercial pressure washer Several times each year the chair and
16. ers The Fixed Back can be ordered in either a 17 back height or a 20 back height An armrest lock upgrade can also be ordered for Fixed Backs 2 3 Adjusta Back Backrest The optional Adjusta Back is adjustable in angle 85 90 or 95 and has armrests that can be adjusted in height and angle The armrests lock automatically when flipped down The Adjusta Back can be ordered in either a 17 20 or a 24 back height Raz AT User s Manual 7 20090122 2 4 Adjustable Tension Back Upholstery The Fixed and Adjusta Backs come with an Adjustable Tension Back Upholstery which provides trunk support for optimal positioning and comfort The Adjustable Tension Back Upholstery is available in both a polyester fabric for comfort and a vinyl material ideal for clinical facilities The upholstery is removable for machine washing and available in the 17 20 and 24 heights according to the back height selected for the chair To install the Adjustable Tension Back Upholstery on a Fixed Back 1 Place the fabric against the front of the backrest canes making sure that when wrapped around the clips on the straps face away from the fabric and the loops point downwards 2 Clip up the lowest strap below the armrest weldment 3 The second lowest strap must be inserted through the slots in the armrest weldments 4 The middle strap can be clipped up above the armrest weldment 5 The second highest strap from the bot
17. its components should be wiped down with a diluted calcium lime removal solution to reduce deposits followed by a hot water rinse To minimize the risk of mildew buildup the entire chair should be wiped down with a soft dry cloth after the final rinse and before storage or use Raz AT User s Manual 16 20090122 3 3 Suggested Cleaning Products Task Recommended Products General Cleaning Antibacterial Detergent Tuberculocidal Surface Cleaner and Accel TB Virox Technologies Inc SepteFX Intermediate Level Disinfectant 7D 11 Titan Worldwide Inc Calcium and Lime Deterrent CLR Outdoor Furniture Cleaner IMPORTANT DO NOT USE ABRASIVE POWDERS OR SCOURING PADS ON THE RAZ SHOWER CHAIR DO NOT SUBMERGE THE RAZ SHOWER CHAIR IN WATER RINSE THOUROUGHLY AFTER CLEANING TO ENSURE THAT ANY SOAP OR DETERGENT RESIDUE IS REMOVED DO NOT USE CLEANING PRODUCTS WITHOUT CONSULTING THE PRODUCTS INSTRUCTIONS AND TAKING APPROPRIATE PRECAUTIONS FOR HUMAN EXPOSURE TO CHEMICALS Raz AT User s Manual 17 20090122 4 0 LIMITED WARRANTY This warranty is extended only to the original purchaser user of Raz Rehab Shower Chairs from a qualified Raz dealer This warranty gives you specific legal rights but you may have additional legal rights depending on your region and country This warranty shall be extended to comply with state provincial laws and requirements With regards to the original purchaser user onl
18. nce that does not allow the casters to grip the floor securely Transfers should never be attempted with the shower chair positioned on slippery surfaces lt is recommended that transfers be performed on clean dry non slippery surfaces a fully carpeted surface is optimal Be aware that area rugs and shower mats can slide on floors and thereby present a hazardous surface DO NOT stand on any part of the frame of the Raz AT Shower Chair NEVER use the footplates to assist in transfers This could cause the chair to tip The footrests should be swung to the side or removed entirely during transfers to provide unobstructed access to the shower chair Raz AT User s Manual 20090122 Tilt Function ALWAYS check the tilt function and ensure both locking gas springs and release cable assemblies are fully operational BEFORE the chair is occupied by the user DO NOT attempt to tilt an occupant if the attendant is physically incapable of safely and smoothly operating the tilt function NEVER leave the user unattended in a tilted position in a Raz AT Shower Chair The Raz AT Shower Chair is NOT intended for use as a transportation device or a long term seating system USERS SHOULD NEVER be left unattended in a Raz AT Shower Chair IMPORTANT IF IT IS EVER FELT THAT ANY ASPECT OF THE RAZ SHOWER CHAIR IS IN NEED OF MAINTENANCE CONTACT YOUR DEALER ANY PROBLEMS THAT COULD AFFECT THE SAFE USAGE OF THE CHAIR MUST BE ATTENDED TO
19. or posterior seat angle adjustment are also available with the Raz Shower Chair The seat to floor height achievable on the Raz AP and SP Shower Chairs is between 1912 and 231 and the chair fits over most standard toilet bowls when the commode pan is not in place Please Note 16 Open Front Seat comes standard with the Raz Rehab Shower Chair Open Front Bridged Front Open Front Bridged Front To install the Molded Seat 19 DEER SEAT 19 DERE SEAT 1 Open the spring clips by squeezing each inward to unlatch the free end from the seat bracket 2 Slide the rear of the seat over the rear crosstube as the front of the seat is lowered onto the frame Check to make sure that the rear seat brackets hook below the crosstube 3 Lower the front of the seat until the front seat brackets nestle onto the front seat support tubes 4 To secure the seat in place squeeze each clip inward while moving the free end towards the To remove the Molded Seat 1 Unlatch the spring clips from the front seat brackets 2 Lift the front of the seat directly up 3 Pull the seat towards the front of the chair to unhook the rear brackets IMPORTANT NEVER ATTEMPT TO CHANGE THE SEAT HEIGHT WITHOUT THE HELP OF A QUALIFIED DEALER ADJUSTED SEAT POSITIONS WILL REDUCE THE CHAIR S STABILITY AND MAY RESULT IN TIPPING AND INJURY Raz AT User s Manual 9 20090122 2 6 Molded Headrest The Molded Headrest is included with all Raz AT Showe
20. ounted on any Raz Model The molded foam pads have a soft foam exterior contoured to hug the torso with a solid insert to provide strength for positioning An extension plate can be ordered as an option to attain additional reach with the lateral support pad The Lateral Pads can be adjusted medially up to 1 on both sides of the chair for slighter individuals The Lateral Supports can be adjusted towards or away from the chair s backrest within a range of 1 The Lateral Support Pads can also be angled to meet the users needs Both Lateral Support Pads lock in front of and behind the backrest To release a Lateral Support Pad from the forward position 1 Grasp one pad bracket at the blue arrow decal and lift up 2 Once released rotate the Lateral Pad to a position behind the back and press down above the decal to lock the pad in place 3 Repeat for the other Lateral Support if desired 4 Ensure that the laterals are locked in place before use To release a Lateral Support Pad from the rearward position 1 Grasp the pad bracket near the mounting post and lift up 2 Once released rotate the Lateral Pad around to the front and press down above the decal to lock the pad in place 3 Repeat for the other Lateral Support if desired 4 Ensure that the laterals are locked in place before use IMPORTANT ALL ADJUSTMENTS TO LATERAL SUPPORT PADS UP DOWN MEDIAL LATERAL AND ANGLE MUST BE PERFORMED BY A QUALIFIED TECHNI
21. ped disengage the optional directional caster lock first before rotating the rear caster to the rearward position and applying the casters dual locks USERS MUST NOT lean forward while sitting in the Raz Shower Chair as this may cause the chair to tip forward USERS MUST NOT wheel down a ramp without an attendant who can hold onto the chair during the descent CASTER LOCKS ARE NOT BRAKES Never use caster locks to slow down the shower chair when descending inclines as this could cause the chair to tip in the direction of travel Lateral Stability USERS MUST NOT lean over the edge of a Raz Shower Chair as this could cause the chair to tip USERS MUST NOT attempt to pick up objects from the floor by leaning over and reaching a reacher or assistance from others should be employed USERS MUST NOT position the Raz Shower Chair on a side slope as this could cause it to tip Raz AT User s Manual 20090122 Ramps and Other Inclines Ramps and other surfaces that are not level such as slopes into wheel in showers must be tested with an attendant to ensure that they do not compromise the chairs stability A qualified healthcare professional should be consulted to assist with this process DO NOT push or pull the Raz AT or up or down an incline or ramp that exceeds a 1 12 grade 5 slope If unsure of the ramp grade contact your authorized Raz dealer for assistance DO NOT allow any user to be propelled pushed or pulled
22. r Chairs The Molded Headrest is shaped to cradle the head comfortably and is easy to clean The Molded Headrest can be adjusted infinitely forward and backwards within a 612 range and vertically within a 12 range To adjust the Molded Headrest 1 Loosen the bottom tri lobe knob and adjust the vertical swan neck bar to achieve headrest height adjustment 2 Loosen the top tri lobe knob and adjust the headrest horizontally for a fore aft change in position 3 To change the angle of the headrest pad loosen do not remove the three screws on the back of the Molded Headrest Rotate the headrest around the end of the headrest mounting bar to suit the users needs and tighten the screws to secure the desired position 4 Ensure that all knobs and screws are tightened securely for the user s safety 2 7 Adjustable Footrests Adjustable Footrests are available as an option on all Raz Shower Chairs Adjustable Footrests are recommended for users who need an extra level of comfort positioning or pressure relief in the thighs For transfers the footrests can be flipped up rotated away or removed entirely Adjustable Footrests can be extended for users with longer legs with the footrest extension tube a 2 longer tube that can be ordered as an option for any Raz Shower Chair To insert the Adjustable Footrests 1 Place the footrest hanger tubes into the receiving sleeves at 2 If the support tubes are aligned forwa
23. r as needed 3 Fasten the chest strap to secure the user IMPORTANT ANY ADJUSTMENTS TO THE CHAIR S STRAPS SHOULD BE PERFORMED WITH EXTREME CAUTION AS THE USER S SAFETY MAY BE DEPENDENT ON SECURE POSITIONING STRAPS Raz AT User s Manual 13 20090122 2 15 Pelvic Positioning Strap An optional two piece Pelvic Positioning Strap can be ordered with the chair and can be attached to any Raz Model The pelvic strap uses heavy duty webbing and a buckle for one handed operation To install the Pelvic Positioning Strap 1 Weave the loose end of one strap through the DD ring and slide the DD ring several inches from the end 2 Feed the strap through the slot in the backrest mounting plate from the inside to the outside and then weave the loose end back through the DD ring 3 Repeat steps 1 and 2 for the other side of the chair 4 Adjust the DD ring and tighten the pelvic strap as necessary To adjust the Pelvic Positioning Strap 1 Loosen both straps through the DD ring on one side 2 Adjust by pulling pushing the strap end in out of the DD ring 3 Repeat step 2 for the other side of the strap 4 Pull tightly on each strap to ensure that it is secured properly 2 16 H Strap An optional one piece H Strap can be attached to the footrests on any Raz Model The H Strap is recommended for individuals who require additional positioning for the legs and feet To install the H strap 1 With the Vel
24. rd the pins on the tubes will engage with grooves in the sleeves and lock in place To adjust the length of the Adjustable Footrests 1 Remove the snap pin from one footrest hanger tube 2 Reposition the footplate to a length suitable for the user 3 Insert the snap pin through the footrest hanger tube and through the inner tube To rotate the Adjustable Footrests 1 Lift the footrest hanger tube up to disengage the pins 2 Rotate the footrests outward or inward To remove the Adjustable Footrests lift the footrests out of the receiving sleeves on the frame Raz AT User s Manual 10 20090122 2 8 Casters Each Raz Rehab Shower Chair caster is equipped with a dual lock feature which stops the caster from swivelling and rolling simultaneously To engage the dual lock step on the end of the caster lock lever until it latches in the on position To disengage the dual lock step on the raised end of the caster lock lever until it latches in the off position 2 9 Directional Caster Lock A Directional Caster Lock can be added to one caster on the Raz AT Shower Chair to facilitate linear movement of the commode and manipulation in confined environments The flip down directional lock keeps one rear caster aligned in a forward direction This feature is provided to facilitate the pushing of the chair by reducing unwanted sideways movement Close quarters manoeuvrability may be easier with the directional lock in the off upwards
25. tom of the backrest must be fed through the loop on the strap above it and can then be clipped up below the crossbar 6 The highest strap can be clipped up above the crossbar 7 Adjust all of the straps to meet the user s needs NOTE For the 20 Fixed Back the two lowest straps should be clipped up underneath the armrest weldment The other four straps can be clipped up in a pattern similar to the 17 Fixed Back To install the Adjustable Tension Back Upholstery on an Adjusta Back 1 Place the fabric against the front of the backrest canes making sure that when wrapped around the clips on the straps face away from the fabric and the loops point downwards 2 The lowest two straps must be inserted through the holes in the armrest weldments 3 The middle strap can be clipped up above the armrest weldment 4 The fourth strap from the bottom of the backrest must be fed through the loop on the strap above it and can then be clipped up below the crossbar 5 The highest strap can be clipped up above the crossbar 6 Adjust all of the straps to meet the user s needs NOTE For the 20 Adjusta Back the lowest strap should be clipped up underneath the armrest weldment The other five straps can be clipped up in a pattern similar to the 17 Adjusta Back For the 24 Adjusta Back the two highest straps should be clipped up above the backrest crossbar The other five straps can be clipped up in a pattern similar to the 20
26. y Raz Design warrants its base and back frame components to be free of defects in materials and workmanship for a period of two 2 years from the date of purchase All other components on the Raz Rehab Shower Chair are covered for a period of one 1 year and are subject to normal wear and tear exclusions If within such warranty period any such product shall be proven to be defective the part will be repaired or replaced at Raz Design s discretion This warranty does not include any labour or shipping charges incurred in replacement part installation or repair of any such product For warranty service please contact the dealer from whom you purchased your Raz Rehab Shower Chair In the event that you do not receive satisfactory warranty service please contact Raz Design directly using the contact information located in either the beginning or the end of this manual In your correspondence please provide your dealers name and address the product type the date of purchase the chair s serial number on a grey label located on the chair frame as well as the nature of the product defect Do not return products to the manufacturer without prior authorization Limitations and Exclusions The foregoing warranty shall not apply to serial numbered products if the serial number has been removed or defaced and to products subjected to negligence or an accident Improper operation maintenance or storage may void the warranty coverage on the Raz Reha
Download Pdf Manuals
Related Search