LM4115 / TM4115 LCD / Touch Monitor
Contents
1. A INSTALLATION for TM4115 touch control Please find in the attached Posiflex product information CDROM under subdirectory Drivers TM4_TM6 RS232 or Drivers TM4000 RS232 for RS232 interface touch controller driver In case this subdirectory is not found in the CDROM received please use identical driver from relevant product such as Drivers TP6000 Touch RS232 In such subdirectory please then find the proper descendant for the OS applied such as RSTC_W9x for Win9x system Click SETUP EXE to install the driver into system and a utility program for touch calibration Please select SmartSet Serial Controller as the controller type POUSIFLEX during the installation process Same approach applies for other operating system If for any reason the user wants to remove the driver for the RS232 touch controller please select Monitor Mouse in the program list for removal B SETUP CALIBRATION for TM4115 touch control Once the RS232 touch controller driver is installed the user can utilize it to calibrate the touch screen define mouse button emulation modes enable right button emulation or define the click sound s tone and duration Please go to Control Panel and sekct Elo Touchscreen to engage this utility Most items in this utility should be easily understandable to average user Followings are just some reminders on some items e COM port This port selection must match exactly the port touch control in2. Press to decrease Press OSD button to save the current setting and return to Brightness Contrast submenu ef EXIT Return to Main menu COLOR ADJUST SUBMENU There are 4 icons in this submenu cle 8 Press OSD button to select item or return to main menu Press NXT button to select among auto color adjust auto RGB reset Color balance adjust and exit AUTO COLOR ADJUST Upon an OSD button press on this icon the monitor will perform an automatic color adjustment and exits the OSD window leaving 2 icons below at center of the screen Press NXT button to switch the selection Press OSD button to make the choice e ACCEPT Accept the adjustment setting e REJECT Decline the adjustment setting and return to previous setting POSIFLEX AUTO RGB RESET Upon an OSD button press on this icon the monitor will perform an automatic RGB reset and exits the OSD window leaving 2 icons below at center of the screen Press NXT button to switch the selection Press OSD button to make the choice ACCEPT Accept the reset result B REJECT Decline the reset and return to previous setting COLOR BALANCE ADJUST When this item is selected there will be 7 icons in this item oor 0001004 s001fs001 Rf between main menu area and the video signal mode Press OSD button to select an item or return to color adjust submenu P
3. or button to shift the screen display to right or left Press OSD button to save the current setting and return to Geometry adjust submenu VERTICAL POSITION When this item is selected there will be only the vertical position icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to shift up the screen display Press to shift down Press OSD button to save the current setting and return to Geometry adjust submenu ef EXIT Return to Main menu TOOLS SUBMENU When this item is selected there are 5 icons in this submenu omp main menu Press NXT button to select among OSD submenu reset to default RII Press OSD button to select item or return to phase smoothness sharpness adjust mode select and exit OSD SUBMENU When this item is selected there are 4 icons in Faas this submenu gh BEJ Press OSD button to select item or return to POSIFLEX main menu Press NXT button to select among OSD time OSD horizontal position OSD vertical position and exit OSD TIME When this item is selected there will be only the OSD time icon with an adjustment indication bar under it between the main menu area and the video signal mode Press or button to adjust the waiting time for OSD operation before OSD termination between 5 to 60 seconds Default is 30 seconds
4. the main menu and its subsequent menus are explained below MAIN MENU There are in total 5 icons in this menu One of the 5 icons will be displayed in inverted color to indicate its EPs KCSE RN relationship with the submenu below Pressing NXT button will shift the selected icon one by one from left to right and then wrap around to the most left Press OSD button to enter the selected sub menu If there is no button for OSD setting is pressed within a period of time about 5 seconds to 1 minute as programmed the OSD window will disappear with all the adjusted parameters saved Explanations on items in sub menu are as below BRIGHTNESS CONTRAST ADJUST SUBMENU There are 3 icons in this submenu FHD RI Press OSD button to select item or return to main menu Press NXT button to select among brightness contrast and exit ie BRIGHTNESS ADJUST When this item is selected there will be only the brightness icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button 669 to increase brightness Press to decrease Press OSD button to save the current setting and return to Brightness Contrast submenu g CONTRAST ADJUST When this item is selected there will be only the contrast icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to 6699 increase contrast
5. the screen will act like clicking the right button of a mouse After this touch it will automatically resume the left click function C APPLICATION With this touch controller driver certain display mode like full screen display of Windows DOS box should be avoided IX LED INDICATION e Green standby e Blue power on When this touch monitor is turned ON the LED lights in blue When the VGA signal vanishes the monitor shows No signal for a while and goes into standby mode and LED is green However the touch panel is still operational X OSD ON SCREEN DISPLAY SCREEN ADJUST FUNCTION A OSD buttons Power Standby LED OSD button To enter OSD setup menu or to perform function selected in OSD operation NXT button To go to next option function button To increase setting value button To decrease setting value B OSD functions Press OSD button with a normal display on the screen to activate the OSD functions On Screen Display adjustment The OSD window will pop up on the screen On top part of this window is a Posiflex logo with the OSD firmware version indicated to its lower right Below this area is a row of icons for main OSD menu Below the main menu is a group of icons for submenu that corresponds to one icon selected in the main menu An analysis of the video POUSIFLEX signal on resolution and refresh rate will be displayed at the bottom Applicable icons in
6. 10 RS232 cable 20863244210 for TN4115 only Posiflex Product Information CDROM for TM4115 only Power adaptor 12 V DC ASPOP042WTBOO1 amp power cord lll PARTS IDENTIFICATION A FRONT VIEW NAWAWN SE Display Screen Main Unit Touch Panel Adjustable Stand Assembly AA B SIDE VIEWS Power on off switch Press on white dot to turn power on Latch hole for cable cover Push in this direction to adjust the tilt angle Lock release lever of the display panel POUSIFLEX C REAR VIEW Lock release button to detach the main unit Cable cover Lock release lever for tilt angle adjust Cable Exit IV INPUT OUTPUT PORTS VGA RS232 RJ45 Jack for TM4115 only 12 VDC ey EE Er a ie V AVAILABLE OPTION ITEMS 1 Wall Mount Kit 2 Deluxe security device upgrade kit KP 110 with necessary extension cable s 3 Common security device upgrade kit SD 110 with necessary extension cable VI INSTALLATION 1 Insert the tip of the plastic key into a latch hole on one side and turn this key counterclockwise to the end Do the same on the opposite side Take the key out of the hole before pulling out the cable cover 2 Press down the lock release button on back of stand assembly when lifting the main unit to separate it from the stand Route all cables through the cable exit in bottom of stand assembly Open the metal plate first if necessary Make all the monitor end of
7. ITS Warranty will terminate automatically when the machine is opened by any person other than the authorized technicians The user should consult his her dealer for the problem happened Warranty voids if the user does not follow the instructions in application of this merchandise The manufacturer is by no means responsible for any damage or hazard caused by improper application ABOUT THIS MANUAL This manual assists the user to utilize the LCD Monitor LM4115 and the TOUCH Monitor TM4115 This product provides exquisite touch control capability over a stable and adjustable LCD monitor with minimal footprint The manufacturer of the LM4115 TM4115 LCD touch monitor heartily apologizes to the user for reserving the right to change or to modify this manual without notice due to the rapid and constant progress and improvement on science and technology The user may always obtain the most up to date information through any of our web sites http www posiflex com tw http www posiflexuk com http www posiflexusa com Copyright Posiflex Inc 2004 TRADE MARKS AND SERVICE MARKS POSIFLEX is a registered trademark of Posiflex Inc Other brand and product names are trademarks and registered trademarks and service marks of their respective owners P N 19640900000 1 POSIFLEX ll CARTON CONTENTS LCD or Touch Monitor Main unit Adjustable stand assembly User s Manual Plastic key for cable cover latch VGA cable 208631366
8. POUSIFLEX LM4115 TM4115 LCD Touch Monitor USER S MANUAL Rev Original l FEATURES e Most stable touch monitor for industrial and commercial use e Application covers POS POI Kiosk Factory Automation etc e High quality 15 TFT LCD panel with scaling function for full screen display e Spill proof and easy maintenance structure allowing easy cleaning e Tilt adjustable yet robust and wobble free construction e Recommended LCD resolution 1024 x 768 e Slim featured from any excessive option for its predecessor e Resistive type extra long life touch panel e Touch functions include left right button double click drag amp drop for TM4115 only e Touch beep can be pitch adjusted and enabled disabled by software control TM only e Connect to host through VGA and COM port FCC NOTICE This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual may cause interference to radio communications It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules which are designed to provide reasonable protection against interference when operated in a commercial environment Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference WARRANTY LIM
9. Press OSD button to save the current setting and return to OSD submenu OSD HORIZONTAL POSITION When this item is selected there will be only the vertical position icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to shift OSD window right Press to shift left Press OSD button to save the current setting and return to OSD submenu OSD VERTICAL POSITION When this item is selected there will be only the vertical position icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to move OSD window downward 6609 Press to go upward Press OSD button to save the current setting and return to OSD submenu Ei EXIT Return to Tools submenu RESET TO DEFAULT Pressing OSD button on this icon will set all parameters back to the status when the monitor left factory SMOOTHNESS SHARPNESS ADJUST When this item is selected there will be only the smoothness sharpness adjust icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to increase smoothness of display 6699 decrease sharpness Press to go the other way Press OSD button to save the current setting and return to OSD submenu MODE SELECT Pressing OSD button on this ic
10. adjust horizontal size phase horizontal position vertical position and exit POUSIFLEX AUTO GEOMETRY ADJUST Upon an OSD button press on this icon the monitor will perform an automatic geometry adjustment and exits the OSD window leaving 2 icons below at center of the screen Press NXT button to switch the selection Press OSD button to make the choice a ACCEPT Accept the adjustment setting e REJECT Decline the adjustment setting and return to previous setting HORIZONTAL SIZE When this item is selected there will be only the horizontal size icon with an adjustment indication bar under it between the main menu area and the video signal mode Press button to increase horizontal size Press to decrease Press OSD button to save the current setting and return to Geometry adjust submenu Q PHASE When this item is selected there will be only the phase adjust icon with an adjustment indication bar under it between the main menu area and the video signal mode Press or button to adjust the pixel synchronization phase for best picture display Press OSD button to save the current setting and return to Geometry adjust submenu O HORIZONTAL POSITION When this item is selected there will be only the horizontal position icon with an adjustment indication bar under it between the main menu area and the video signal mode Press
11. cables to come out of the stand assembly like the right picture below Hook the main unit back on stand assembly by matching the matching pegs to round part of matching holes and slide them down to slot part till the rear latch clicks POSIFLEX Matching Holes Round Part Slot Part Cable Cover Removal Hollow Matching Pegs N 3 Connect the 10 pin RJ45 plug end of the touch control cable to the jack till it clicks Connect and screw fix the end with power connector of VGA cable to VGA port on TM4115 Connect the output plug from the power adaptor to the DC jack inside cable cover of TM4115 4 Consolidate the cables and close and lock the cable cover by inserting and turning the latchkey clockwise 5 Connect and screw fix the other end of touch control cable to an appropriate COM port and the VGA cable to VGA port of the host system Check the specification of the power adaptor against the power socket then insert power cable from the power adaptor into the power socket 6 Adjust for best viewing tilt angle then press the power switch down to turn on the LCD panel and proceed for touch driver installation Vil UPGRADE KIT INSTALLATION TIPS For mounting the upgrade kits KP 110 or SD 110 the required extension cables will arrive as accessory Connect these extension cables with the upgrade kit in the cable cover area and connect to the host together with the VGA and the touch interface cable Vill DRIVER INSTALLATION
12. on will have no effect at all if the display mode is not one of the confusing modes The confusing modes here mean 640 x 400 or 720 x 400 in display resolution as both mode have refresh rate of 70Hz horizontal frequency of 37 9KHz 10 POUSIFLEX and pixel frequency of 31 5MHz making it impossible for automatic select These modes are not used in normal Windows display E EXIT Return to Main menu Ei EXIT Exit OSD setup with all adjustment saved XI SUPPORTED DISPLAY MODES For video signals beyond the supported display modes there will be a message Out Of Range on middle of screen Maximum supported color depth is 18 bits or 262 144 colors Supported display modes are as in the table 640 400 37 9 31 5 640 480 37 9 37 5 1024 768 XII TROUBLE SHOOTING In case of any malfunction please check the following points in sequence to resolve it 1 If there is no power indication please check the power connection 2 If there is no picture display with power LED on please check the video signal connection 3 If there is no touch function please check the connection of the RS232 cable 20863244210 for RS232 interface touch controller Please pay particular attention on whether the RS232 cable is connected to the right COM port of PC according to the driver installation 11
13. ress NXT button to select among separate color adjust 4200K SOO0K 6500K 7500K 9300K and exit E SEPARATE COLOR ADJUST When this item is selected there will be 3 adjustment indication bars between the main menu area and the video signal mode Press NXT button to select among the 3 colors Red Green and Blue respectively Press button to intensify that color Press to reduce Press OSD button to save the current setting and return to Color balance adjust submenu 4200K Pressing OSD button on this icon will set the color balance to a color temperature of 4200 degrees Kelvin gay 5000K Pressing OSD button on this icon will set the color balance to a color temperature of 5000 degrees Kelvin soo 6500K Pressing OSD button on this icon will set the color balance to a color temperature of 6500 degrees Kelvin p00 7500K Pressing OSD button on this icon will set the color balance to a color temperature of 7500 degrees Kelvin a 9300K Pressing OSD button on this icon will set the color balance to a color temperature of 9300 degrees Kelvin EI EXIT Return to Color adjust submenu EXIT Return to Main menu GEOMETRY ADJUST SUBMENU There are 6 icons in this Sy Ni E submenu AEewesl Press OSD button to select item or return to main menu Press NXT button to select among auto geometry
14. terface cable is connected to e Align This function engages 3 touch targets at left top right bottom and right top consecutively for touch calibration e Click on touch This selection of touch button disables the double click function of a touch and a left click will be registered at the point where a touch on the screen is made even if the touch is dragged to other spot before release e Click on release This selection of touch button disables the double click function of a touch and a left click will be registered at the point where a touch is released from the screen e Drag This selection of touch button disables the double click function of a touch and a left click contact signal will be sent to the host when a touch is made and a left click release signal will be there for touch release Drag Double click This selection of touch button allows the screen touch to simulate the complete left button of a mouse e Double click size This adjustment 10 to 100 pixels is available only when double click function of the touch is enabled The larger the size is the easier it is to take 2 consecutive taps on the touch screen at nearly same spot as double click Show right click sticky button This function is only applicable in Win98 environment When this box is checked there will be a large POSIFLEX icon on desktop simulating a mouse After clicking the right button of the mouse in this icon next touch on
Download Pdf Manuals
Related Search