MBM-1 Battery Powered Mirror Ball Motor
Contents
1. E qtx MBM 1 Item ref 153 106UK Battery Powered Mirror Ball User Manual Motor Introduction Thank you for choosing the QTX MBM 1 battery powered mirror ball motor This item will provide a convenient solution for small to medium tasks where no mains power is available Please read the below instructions to ensure proper implementation and avoid damage through misuse WWww avsl qtx com an ean si group brand WG qtx A Caution Please read this manual carefully before operating Damage caused by misuse is not covered by the warran General safety The MBM 1 is intended for indoor use only Keep away from damp or humid environments Keep the motor and housing dust free and do not allow particles to enter the mechanism Clean the MBM 1 periodically with a dry lint free cloth Do not use solvents on the casing Keep away from heat sources or direct sunlight Installation The MBM 1 mirror ball motor is powered by a single 1 5V cell D type which should be installed before installation Open the battery compartment and connect the D cell ensuring the correct polarity as indicated Positioning of the mirror ball motor is very important Safety is the most important factor Please note the following to avoid failure and possible injury e The motor and mirror ball should be out of reach to avoid tampering e The mirror ball should not weight more than 2kg e The chain holding the mirror ball should be adequate for the load e The f2. ixing into the ceiling must be strong enough to hold both mirror ball and motor Operation To start the motor rotation slide the side mounted switch to the on position The spindle will rotate and so the mirror ball will rotate also The MBM 1 is hinged to allow some sideways movement if the load is not perfectly symmetrical Remember to switch off when not needed to preserve the battery If not being used for long periods remove the battery and store in a dry place Battery 1 5V 1 x D not supplied eK Max weight load 2kg Rotation per minute Dimensions 180 x 50mm Weight 130g Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life C E X Disposal The Crossed Wheelie Bin symbol on the product means that the product is classed as Electrical or gas The goods must be disposed of according to your local council guidelines Errors and omissions excepted Copyright 2013 AVSL Group Ltd 153 106UK User Manual
Download Pdf Manuals
Related Search