InjectIR
Contents
1. 4 Now plug in the HDMI cable with attached InjectIR adapters into your TV and equipment2. Sewell njectikR IR Over HDMI For Remote Controls The Sewell InjectIR extends the signal from your remote controls for Blu Rays DVRs set top boxes etc by sending the remote control s IR signal over an existing HDMI cable This allows you to conceal your home entertainment equipment behind cupboard or closet doors without losing the ability to control them with a remote Follow these instructions to use any of your connected HDMI cables to extend your remote control signal The kit includes two small HDMI adapters and two small IR cables the one labeled RX is the IR sensor cable and the one labeled TX is the emitter cable Step 1 Attach the InjectIR HDMI adapters to both ends of your HDMI cable Either HDMI adapter can go on either side of the HDMI cable Make sure the CEC IR selector switches are set to IR Step 2 Connect the InjectIR IR sensor cable labeled Rx to the TV side Position the sensor where it will have an unobstructed view to your remote control i e on top of the TV Step 3 connect the InjectIR IR Emitter cable labeled Tx to the equip ment side Position the emitter in front of your equipment NOTE The IR transmitter TX unit needs to be facing the front of your video equipment If you place the transmitter unit in front of multiple devices it can control multiple devices Just make sure there is an unobstructed line of sight between the TX transmitter unit and the IR receiver on each device Step
Download Pdf Manuals
Related Search