Operations Manual VCC - Adande Refrigeration
Contents
1. a ADANDE Operations Manual VCC Contents 1 What is the Adande System 2 Adande Technology Explained 3 EC Declaration of Conformity 4 Storage of Product 5 Operating Adande Temperature Settings 5 1 The Display Controls 5 2 Locking and Unlocking the Controller 5 5 Defrost 5 4 Drawer Alarm 5 5 Error Alarm 5 6 Temperature Alarm 5 7 Location and Stability 5 8 Servicing amp Warranty 6 General Warning and safety Precautions 6 1 Electrical 6 2 Food 6 3 General 7 Drawer Maintenance 8 Contact details ADE 2030 B Page WO ONNNNODUUY Ul IO O WO OO a O a Page 2 of 11 Welcome to Adande Refrigeration 1 What is Adande Adande is a new method of cold storage developed as a series of refrigerated drawers that offer storage temperature flexibility in 1 C increments between 22 C and 15 C Each refrigerated drawer Provides stable temperature storage A removable container to act as temporary cool and safe product storage Gives full plan area access providing space efficient storage Is easily cleaned or replaced 2 Adande Explained Adande uses standard technology and refrigeration parts but in a completely new and patented way A dedicated fridge engine supplies refrigerant to an evaporator coil assembly The evaporator coil assembly then supplies cooling to the insulated container and is sized to maintain up to 40kg of product at any set point temperature in the range of2. during operation or servicing by contacting the Adande technical support line refer to Appendix 1 at the back of this manual 6 General Warning and Safety Precautions 6 1 Electrical e Untrained personnel should not remove any of the access panels e The access panels should not be removed with the electrical supply connected e To disconnect the electrical supply remove the plug from the electrical socket 6 2 Operational Use and Cleaning e Use only a soft cloth water or mild soap solutions to clean the drawer e Do not use hard brushes or other items for cleaning e Remove any food which may have accidentally dropped from the food preparation surface into an open drawer or drawer runners e Do not leave drawers open for longer periods of time than necessary e f drawers are stacked avoid opening more than one drawer at a time e Ensure products that give out acidic odours like vinegar onions etc are sealed before placing in the insulated container 6 3 General Do not exceed the maximum fill level or loading of 40kg per drawer Do not sit stand or apply additional downward pressure on an open drawer Do not operate drawer with any panels removed Do not clean drawer with any panels removed Ensure drawer is installed and maintained on a flat clean and level surface lf mounted on a castor base ensure brakes are applied to the front two castors The room in which the drawer is Kept should be dry and sufficiently v
3. 0335 2 24 The Safety of Household and Similar Electrical Appliances Part 2 24 Particular Requirements for Refrigerating Appliances and Ice Makers The technical file for this machinery will be prepared on demand by Name lan Wood Position Managing Director Who signs on behalf of the manufacturer ADANDE REFRIGERATION 45 Pinbush Road South Lowestoft Industrial Estate Lowestoft Suffolk NR33 ZNL ADE 2030 B Page 4 of 11 4 Storage of Product For the drawer to operate at full efficiency the heated seal should be maintained in good condition It is essential that the product is not stored above the MAX FILL LEVEL line as this can damage the seal and affect the operation of the drawer The drawer is capable of storing any food product However products which may give off acidic odours like vinegar onions etc should be suitably sealed Adande also recommends storage containers with liquid food products be stored with lids Ensure that the product is never stacked above the MAX FILL LEVEL Label in the insulated container 5 Operating Adande Temperature Control System The Adande temperature control system allows you to set and control the drawer within a temperature range of 22 C 8 F and 15 C 59 F Temperature accuracy in the drawer will be maintained within 2 C of the set point 5 1 The Display Controls To adjust the temperature set point figure 2 press and hold the i button t
4. 22 C to 15 C Figure 1 Front view of Adande Compact Drawer ADE 2030 B Page 3 of 11 3 EC Declaration of Conformity We declare that the following machinery complies with the essential health and safety requirements of The Machinery Directive 2006 42 EC The Low Voltage Directive 2006 95 EC The Electromagnetic Compatibility Directive 2004 108 EC The Pressure Equipment Directive 97 23 EC Machinery Description 1 Drawer Appliance for Chilled Storage Make Adande Type Adande Drawer Refrigeration Units Manufactured by Adande Refrigeration 45 Pinbush Road South Lowestoft Industrial Estate Lowestoft Suffolk NR33 ZNL The following transposed harmonised European Standards have been used EN ISO 12100 parts 1 amp 2 Safety of Machinery Basic concepts general principles for design EN ISO 13857 Safety of Machinery Safety distances to prevent danger zones being reached by the upper and lower limbs EN ISO 153732 1 2006 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1 Hot surfaces EN 1672 2 Food processing machinery Basic concepts Part 2 Hygiene requirements EN 61000 6 3 2001 Electromagnetic compatibility EMC Part 6 3 Generic standards Emission standard for residential commercial and light industrial environments EN 61000 6 1 Generic Immunity Standard Residential commercial and light industrial environments EN 6
5. entilated No obstructions should be placed directly in front of the condenser air outlet The drawer should be regularly inspected and checked against the requirements of this Operations Manual ADE 2030 B Page 9 of 11 7 0 Drawer Maintenance Dirt and grease should be removed on a weekly basis using the following procedures The heated seal should be cleaned on a weekly basis with a solution of warm water and mild detergent The insulated container can be totally removed from the drawer for deep cleaning Clean the insulated container with an anti bacterial cleanser Clean the steel surfaces with a polish cleaner NOTE DO NOT USE SHARP UTENSILS STEEL PADS WIRE BRUSHES SCRAPERS OR CHLORIDE CLEANERS TO CLEAN STAINLESS STEEL NOTE DO NOT PRESSURE WASH EQUIPMENT THIS CAN DAMAGE THE ELECTRICAL COMPONENTS ADE 2030 B Page 10 of 11 8 Appendix 1 Contact Details Contact us Adande Refrigeration 45 Pinbush Road South Lowestoft Industrial Estate Lowestoft Suffolk NR33 ZNL United Kingdom Service Enquiries Telephone 44 0 844 3760023 Mobile 44 0 7967 559652 Fax 44 0 1502 533794 Email service adande com Parts Enquiries Telephone 44 0 844 3760023 Fax 44 0 1502 533794 Email parts adande com Sales Enquiries Telephone 44 0 844 3760023 Fax 44 0 1502 533794 Email sales adande com ADE 2030 B Page 11 of 11
6. he drawer set point will then be displayed While holding the i button Increase or decrease temperature using the arrow buttons on release of both buttons the new set point will be stored Manual defrost Increase temperature Decrease temperature Power On Off Set temperature Figure 2 Adande Display Control Panel ADE 2030 B Page 5 of 11 5 2 Locking and Unlocking the Controller a Press and immediately release i b Press button i again to display T2 button to display T1 e Press button i again to display CND f Press button i again to display LOC g Hold the i button to display either yes h Press either of the X or Xbuttons to or no change yes no setting ADE 2030 B Page 6 of 11 5 5 Defrost The refrigeration system automatically defrosts If a manual defrost is required then press the manual defrost button on the control panel for 5 seconds After a defrost has been performed REC will show up on the display read out this stands for recovery and will be displayed until the unit reaches it s set point 5 4 Drawer Alarm If the drawer is open for more than 3 minutes the Drawer Open alarm will be triggered an audible alarm will sound and DO will flash on the display panel if the drawer is still not closed after an additional 3 minutes then HI will be displayed When the alarm has been activated the Adande drawer will alar
7. increased If the temperature does not return to the set point temperature an engineer should be called ADE 2030 B Page 7 of 11 5 6 Location and Stability It is important that the Adande drawer is installed and maintained on a flat clean and level surface to ensure correct operation The room should be dry and sufficiently ventilated Optimum performance is obtained at ambient temperatures between 16 C 60 F and 38 C 100 F The air outlet grille which is situated underneath the drawer must be kept clear at all times to maintain optimum performance The Adande drawer has four castors two of which have brakes which should be ON during normal use as shown in figure 4 Press to lock the castor Figure 4 Lockable Castor THE INSULATED CONTAINER SHOULD BE UNLOADED BEFORE MOVING ADE 2030 B Page 8 of 11 5 7 Servicing amp Warranty Service personnel must be suitably trained in refrigeration and experienced in servicing Adande products Only use Adande Approved and Registered Service Engineers which can be supplied on request Your Adande drawer should be regularly inspected and checked against the requirements of this Operations Manual Failure to do so may invalidate the warranty Your particular attention is drawn to the requirements of sections 6 and 7 of this document ACCESS PANELS MUST NOT BE REMOVED BY UNTRAINED PERSONNEL Advice and help can be obtained to resolve any problems that may occur
8. m both visually and audibly To silence the audible alarm press ANY button on the display or close the drawer The alarm light and flashing display will continue to show until the drawer has been fully closed NOTE THERE IS NO COOLING TO THE INSULATED CONTAINER WHEN THE DRAWER IS OPEN 5 5 Error Alarm If display reads E1 or E2 a temperature probe has failed and an engineer should be called The Adande drawer will operate with a 10 minute on 10 minute off cycle in the event of an Ei failure This will help to maintain the stored product at a safe temperature but precise temperature control will be lost E2 will only affect defrosts and these will be timed to maintain operation of the unit An engineer should be called as soon as possible for either fault 5 6 Temperature Alarm If HI should appear on the display the drawer temperature has exceeded its set point by 7 C and product core temperature should be checked This alarm may also be triggered if the Adande drawer has recently been turned on loaded with warm product or left open for a long period of time If the temperature does not return to the set point temperature an engineer should be called If LO should appear on the display the drawer temperature has fallen below its set point by 7 C and product core temperature should be checked This alarm may also be triggered if the Adande drawer s temperature set point has recently been
Download Pdf Manuals
Related Search