Downloaded from www.vandenborre.be
Contents
1. etc Turn off or remove these Picture is too dark too light or tinted Check the colour adjustment EN O 4 Other information Check the brightness setting 7 Check the sharpness function The LCD panel s fluorescent lamp rifay have reached the end of its service life Le Remote control does not work e Check the batteries of the remote control i Make sure the remote sensor window on the Ve front is not under strong fluorescent lighting Try to clean the remote sensor window on the TV front with a soft cloth If the above suggestions do not solve your technical issue please refer to the warranty card for service information Television specifications TV Broadcasting PAL SECAM BG DK I LL Receiving channels VHF UHF Cable Tuner type Frequency synthesized Operating Conditions Temperature 5 C 35 C 41 F 95 F Humidity 20 80 non condensing Storage Conditions Temperature 15 C 45 C 5 F 113 F Humidity 10 90 non condensing OSS Notice This product uses software library from Freetype Project O lp cg This product uses software library which is distributed under the zlib license This product uses UNICODE software programs which are distributed under IBM Open source license This product uses glibc software programs which are distributed under the GNU license 152. In recording PVR mini pane will also show on the screen to indicate the recording progress 5 To watch the recorded programme exit PVR mode first and go to Media center gt Video Select the folder PVR then select the related record file Press OK to play It is the same if you record a digital radio programme Notes Feature available only for digital non encrypted channels Even when CICAM CI or CI is inserted feature is not available on encrypted channels Only supports USB drive of FAT32 format Before you connect the USB drive to the set make sure you have backed up the data in the drive to avoid the loss of your important data due to unforeseen malfunction The bigger the USB drive free memory for the PVR function the bigger the recording length If you want to change channel or signal source during recording store the recording data before changing the channel or source The set cannot play files normally if the parameters of the file exceed the limitations of the system the file format is not supported the file is damaged or the file cannot be decoded Do not disconnect the USB drive when the system is reading a file or transmitting data otherwise the system or the drive may be damaged Schedule list This function is used to perform scheduled recording 1 Press Option on the remote control and select Quick access gt Schedule list 2 Press OK P to display the schedule list 3 To add a sc
3. by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard Leave more than 10cm clearance around the television to allow adequate ventilation The ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus To prevent the spread of fire keep candles or other open flames away from this product at all times WARNING To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions CAUTION Connect headphones with the volume set low and increase if required Prolonged listening through headphones at high volume settings can result in hearing damage Eye Fatigue When using this product as a computer monitor health and safety experts recommend short frequent breaks rather than occasional longer breaks For example a 5 10 minute break after an hour of continuous screen work is considered to be better than a 15 minute break every 2 hours Do not use the monitor against a bright background or where sunlight or other bright light sources will shine directly onto the screen The or POWER Q button on the TV set or the 4 button on the remote control can be used to switch it on and put it into standby mode If you are not goin
4. m i 1 i ob Rae Y DVD player Home theatre system Blu ray Disc player HD game console amp HD camcorder Notes ARC Audio Return Channel function is only supported on HDMI 1 ARC port Number of HDMI ports may vary USB connector is for data input from USB storage devices All USB devices have to be directly connected to TV set without cable extenders In case extender is required it has to be as short as possible and equipped with ferrite beads MHL Mobile High Definition Link function allows you to link an MHL capable mobile device to the television and is only supported on the TV HDMI port identified with MHL i Ga e Blu ray Disc gt player Bluray Dise HDMI 1 ARC 7 Notes Not all connections available on all models The location of the power socket on the TV may vary according to TV model The positions and names of the function buttons and connectors on the TV may vary according to TV model EN 5 O E Chapter 2 2 Getting started C Remote control functions Cn Cy Most of your television s functions are available via the menus that appear on the screen Th amp remote control supplied with your set can be used to navigate through the menus and to configure all the gene oe he Source To select connected devices by Standby quit standby Me 0 9 To select a channel page or setting E
5. power socket varies according to TV model On certain models you have to turfegn the power switch first PA Note Disconnect the power cord before connecting devices lt Bih Cable 6 See DVD recorder cable receiver LAN HDMI1 ARC VGA adapter Mapter adapter input q i i i 02 i i Y ovo Eoss DDS recorder o OD LDA v Set top orgy aa box 29955 EN 4 O b i 4 Connections O T DVD player home theatre system PC headphones Ms Eg Notes Before connecting a PC set the PC monitor refresh rate to 60Hz L The connectors of VGA and CMP YPbPr share the same audio input connector Ly Excessive sound pressure from earphones and headphones can cause hearing loss by It is recommended to use as short as possible high quality HDMI cables to avoid possible interferenc s y It is recommended to use 1m long or shorter VGA cable with ferrite beads in case VGA input is availabl TV and TV is connected using VGA cable Maximum supported VGA resolution is 1024x768 60Hz on Maa Or use an HDMI F connection s AV CMP vPoP AUDIOin Antenna Cable LAN HDMI 1 ARC VGA adapter adapter adapter input
6. remote operation between TV and mobile phone e Video Audio output from your mobile phone Notes These functions may not be available depending on the connected equipment If there is no more battery life left in the connected device charging will not start To operate the mobile phone with the TV remote you need to turn on the T Link function first then press Option and select Quick access gt T Link gt Setup gt Guide Menu Follow the virtual keypad to do operations Connecting MHL compatible Device Connect the MHL compatible device to the HDMI port identified with MHL on the TV using an MHL cable not supplied charging will start automatically e When connecting an MHL compatible device to the HDMI port identified with MHL on the TV switch the TV source to HDMI 2 or HDMI Note Do not connect the MHL compatible device to any ports other than HDMI port identified with MHL When using MHL Interoperability with MHL devices from other 14 ys 6u3 manufacturers is not guaranteed TCL does not provide any guarantee therefore against operational failure such as that described below when an MHL source is connected to the TV No picture or sound Some of the functions do not work by remote operation from the TV If MHL does not work properly also contact the manufacturer of the source device for advice on its use Do not disconnect the power plug of the TV when the TV is active and the M
7. to increase or decrease the volume Sound mute press the Mute button to temporarily mute the sound Press this button again or the V button to restore it Using TV menus 1 Press Menu to display the main menu Refer to Figure 3 2 Press A W lt 4 gt to select the desired item then press OK to open the corresponding submenu 3 In submenus use A V to select menu options use lt P gt to set functions or change values Use OK to activate a setting Use OK to open the corresponding submenu Press Menu to return to the previous menu 5 Press Exit to close the menu Note Some options may not be available for certain signal sources gt Selecting menu language You can choose your preferred menu language following the instructions below 1 Press Menu to display the main menu 2 Press A lt gt to select Setup then press OK to enter Chapter 5 3 Select Language and press OK gt to enter 4 Select Menu language and press lt P gt to select your desired language to display the menus 5 Press Exit to close the menu Using more of your TV Setting up your favourite channels You can create a list of your favourite TV channels 1 Press LIST 2 Press the yellow button to enter Channel list selection Press A V to select the favourite list and press OK to enter 3 Press the blue button to start editing your favourite list Press A to scroll through the channel list and press OK t
8. 0 ECO SONGS oc2s csssc8anceeseiinesaitascetadeetanses 10 Audio description iseni ara sunenednnisdabenscedn 10 Using SUDUHMES ws ciSicsccestcchincmamsenadinnnaebecewnaenenn 10 Turning on off subtitles c eeeeeeeeeeeeeeees 10 Enabling subtitle languages on digital TV channels 10 Selecting a subtitle type on digital TV channels 10 Selecting decoding page language in Teletext 10 Digital Teletext language eee 10 SPDIF type cidescceitcteacastacestvesseareiendanian neta aes 10 TSDIAK aut rete sate aaetl ees AG S E ces 11 Enabling or disabling T Link 0eceeeeee 11 Using one touch play 0 0cceeeeeeeeeeeeeeeeee 11 Using system standby 0 0cceeeeeeeeeeeee ee 11 Common interface eeeeeeeeeeeeeeeeeeeeeeenees 11 Using the common interface module 11 Accessing common interface services 11 Software update 20 02 cc cec cee eec eee eee eee eeeee eens 11 Changing to Shop or Home mode 066 11 MHEG Tuinctioni c 22ceucseo2tcecnvecseveescutelasccat eat 12 Viewing photos playing music and watching videos from a USB storage device 12 PNOO Oe caces enea ct ace sane aacesta E 12 MUSIC Soan ieee ten A a asec et 12 EN 3 O i Chapter 1 2 Connections g A Connecting the power and antenna To To switch on TV after connecting power cord press or POWER O O Note Position of
9. CO To select desired power saving mode D Guide To toggle the Electronic Programme Guide on or off only available for digital SA channels Menu To access the main menu to return to the previous menu Exit To exit the menu structure or Teletext AV To navigate in the main menu to select menu options to switch to the previous or next photo song or video in USB function lt gt To navigate in the main menu to set functions and change values can Zoom also be used to open the corresponding submenu To select the picture format Note You are recommended to use the full screen mode Do not use the display mode with black bars on both sides of the picture such as 4 3 for a long time otherwise the TV screen may be damaged permanently OK To open the corresponding submenu and activate a setting in menus to freeze unfreeze the picture in digital TV mode Option To display the function menu to perform certain operations to display the Teletext page in different modes Return To return to the previous channel to return to the previous menu in USB function V To control the volume Info To display programme information if available a Mute To switch the sound off and back on P To change channels TEXT To toggle Teletext on or off SUBTITLE To select a subtitle language available for selected digital TV programme LIST To display channel list TV To access TV mode Colour To select tasks or Teletext pages The red button ca
10. HL device is connected Do not disconnect the power plug of the TV when the TV is in standby mode and the MHL device is connected Other information Password in Parental Control The default password is 1234 You can change it to a new one The super password is 0423 If you forget your code enter the super password to override any existing codes Troubleshooting Please check the following list before requesting service There is no picture or sound Make sure the power cord is properly inserted in the power outlet Make sure the source type is set correctly e Make sure the antenna is properly connected Make sure the volume is not set to minimum or the sound is not set to mute Make sure the headphones are not connected The TV may be receiving a signal other than from TV broadcasting stations Picture is not clear e Make sure the antenna cable is properly connected Consider whether your TV signal is being properly received Poor picture quality can occur due to a VHS camera camcorder or other peripheral being connected at the same time Switch off one of the other peripherals The ghost or double image may be caused by obstruction to the antenna due to high rise buildings or hills Using a highly directional antenna may improve the picture quality The horizontal dotted lines shown on the pictures may be caused by electrical interference e g hair dryer nearby neon lights
11. Important information Lb SSS Safety Ensure that your domestic mains supply voltage matches the voltage indicated on the identification sticker located at the back of your set Where the mains plug or an appliance coupler is used as disconnect device it shall remain readily operable On certain models the light indicator is located at the side of the TV set The absence of a light indication at the front does not mean that the TV set is fully disconnected from the mains To disconnect the TV set completely the mains plug must be pulled out The TV set s components are sensitive to heat The maximum ambient temperature should not exceed 35 Celsius Do not cover the vents at the back or sides of the TV set Leave sufficient space around it to allow adequate ventilation Install the appliance away from any source of heat fireplace etc or appliances creating strong magnetic or electric fields Moisture in rooms where the set is installed should not exceed 80 humidity Moving the set from a cold place to a warm one can cause condensation on the screen and on some components inside the TV set Let the condensation evaporate before switching the TV set on again WARNINGS This appliance is intended for domestic household use only and should not be used for any other application such as for non domestic use or in a commercial environment If the external flexible cable or cord of this product is damaged it shall be replaced
12. In this step you can press OK to exit the initial setup The channels are arranged in a preset order If you wish to skip channels modify the preset order or rename channels select Setup gt Organiser and press OK gt to enter In this step you can also press lt to return to the previous step Performing an automatic channel search This section describes how to search and store channels automatically Instructions are for both analogue and digital channels This may be done in any of the cases below you have selected Skip scan in the Initial setup you see Please scan channels in TV mode you want to update your channels 1 Press Menu on the remote control and select Setup gt Language gt Menu language Press lt gt to select your desired menu language 2 Press Menu to return to Setup Press A V to select Country then press lt gt to select your country The TV installs and arranges channels ys 6u3 Chapter 4 according to your country At this step you will be requested to enter your password 3 Press A V to select Tuner mode then press lt gt to select Antenna or Z Cable or amp Satellite Note amp Satellite option may not be available for certain models Then follow a or b or c below a If you have selected 4 Antenna Press A V to select Channel install and press OK P to enter Select Automatic search Refer to Figure 2 then press OK P to display Autom
13. an be deactivated in Options menu the photo menu in folder mode 6 Sort Sort folders and photos by modification 4 MHEG function Date or Name Some digital TV broadcasters offer dedicated digital Edit Copy paste or delete a selected photo 6 text or interactive services for example BBC1 Parser You can select Recursive to display These services work like normal Teletext with the photos from all sub file folders addition of number colour and navigation buttons 5 Select a photo press OK to watch and a slide 1 Press Menu on the remote control and select show begins from the selected photo Press OK to Options gt Subtitle gt Subtitle pause the photo Press Menu to display the photo 2 Press lt gt to set Subtitle to Off menu in the browser mode You can play pause Note For some models MHEG and subtitles are or rotate the photo select different play modes mutually exclusive and cannot coexist on the and display effects etc same screen If Subtitle is set to On MHEG _ 6 Press the related buttons on the remote control will not appear to perform the available functions shown on the 3 Press the red button or TEXT on the remote function bar at the bottom of the TV screen Press control the Info button to show or remove the function bar 4 Press A lt P to select or highlight items Music 5 Press OK to confirm or activate 6 Press one of the colour buttons to select an option 7 Press TEXT or Exit to exit Use t
14. an press OK to edit the parameters of the selected satellite Then with your desired options of Scan mode and Channels select Scan and press OK gt to start scanning 4 The search may take a few minutes During the process you can press Menu to abort halfway 5 Once the automatic search ends press Menu to return to the previous step or press OK to restart your channel search EN 4 Using your TV o 6 After the automatic search Channels are arranged in a preset order If you wish to ski channels modify the preset order or renam annels select Setup gt Organiser and pres gt to enter 4 bh i 2 Using your TV Qh Accessing channels on Using the numeric buttons press the corresponding r numeric buttons to access the channels 6 Using the PR or P buttons scroll through the channels Watching connected devices There are three ways for you to select connected devices on your TV you can press Menu on the remote control and select Source you can use the OK button to enter then press A V and OK to select your wanted connected devices you can also repeatedly press Source on the remote control or OK on the TV set to toggle between TV and other input sources To resume TV viewing you can press any numeric button Note Not all models have OK button on the set Volume Volume control use the VOL or VOL lt gt buttons on the TV set or V buttons on the remote control
15. ards Multi product user manual The features described in this manual are common to most models Some features may not be available on your TV and or your TV may include features that are not described in this user manual The illustrations in this manual may differ from the actual product Please refer to the actual product EN Information for Users on Disposal of Old amp Equipment and Batteries O European Union These symbols indicate that the electrical and 4 electronic equipment and the battery with this A symbol should not be disposed of as general p household waste at their end of life Instead the 2 EE products should be handed over to the applicable amp Products collection points for the recycling of electrical w and electronic equipment as well as batteries for proper treatment recovery and recycling in accordance with your national legislation and the Directive 2002 96 EC and 2006 66 EC Pb By disposing of these products correctly you Battery will help to conserve natural resources and will cee Pb help to prevent potential negative effects on below the the environment and human health which could Symbol for otherwise be caused by inappropriate waste indicates that handling of these products this battery For more information about collection points and recycling of these products please contact your local municipal office your household waste disposal service or the shop where you purchased th
16. atic search e Press OK to skip the country selection and enter the next step Or use lt P to reselect your country then press OK to enter Select Digital amp Analogue or Digital or Analogue then press OK P to start the automatic search which relates to all DVB T digital and or analogue channels b If you have selected Z Cable Press A V to select Channel install and press OK P to enter Select Automatic search then press OK gt to display Automatic search e Press OK to skip the country selection and enter the next step Or use lt P to reselect your country then press OK to enter If you select Digital amp Analogue then press OK gt to enter Select your scan mode if available and configure proper cable information in the same way as in Initial setup Press A V to select Scan and press OK gt to start your automatic search relating to all DVB C digital and analogue channels If you select Digital then follow the same process as above to start your automatic search relating to all DVB C digital channels If you select Analogue then press OK gt to start your automatic search relating to all analogue channels c If you have selected amp Satellite Press A V to select Channel install and press OK P to enter e Select Automatic search then press OK gt to enter You can select a proper satellite or an operator e Press OK to go to the next step Before you start scanning you c
17. e product Penalties may be applicable for incorrect disposal of this waste in accordance with national legislation Business users If you wish to dispose of this product please contact your supplier and check the terms and conditions of the purchase contract Other Countries outside the European Union These symbols are only valid in the European Union If you wish to dispose of these items please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical equipment and batteries Dear Customer This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety TCL Operations Polska Sp z 0 0 ul A Mickiewicza 31 41 96 300 Zyrardow Poland Email address zyeee tcl com Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance Product design and specifications may be changed without notice EN 2 by Contents a O m Important information cececeeeeeeeeeeee eens 1 VideO stuerne Aye EE 12 a Time ACCESS Gy EE 13 fag Chapter 1 Connections f H Diagnostics on digital TV channels 4 13 Connecting the power and antenna 0 4 Reset Shop ceccsccsccsecssessessecsessveseeseent Dje ecni 13 DVD recorder cable receiver eeecererererene 4 Customisi
18. ed by an authorized engineer Never open the appliance yourself since this may put you at risk or damage the appliance Hanging the TV set on the wall Warning This operation requires two people To ensure a Safe installation observe the following safety notes Check that the wall can support the weight of the TV set and wall mount assembly Follow the mounting instructions provided with the wall mount For certain models make sure to screw the hexagonal VESA wall mounting screw bosses and screws provided with the set into the nuts for the wall mount at the back of your set before your wall mounting The TV set must be installed on a vertical wall Make sure to use only screws suitable for the material of the wall Make sure that the TV set cables are placed so that there is no danger of tripping over them All other safety instructions about our TV sets are also applicable here Placing the TV on a table and other surfaces Before setting up your television set make sure that the surface you want to put the set on can support its weight Do not place the set on an unstable surface e g moving shelf very edge of a unit and make sure that the front of the television set does not overhang the surface it is standing on To avoid TV from falling please fasten TV to the wall by using necessary screws in Vesa wall mount holes clamps anchors to be bought separately Install TV near to the wall to avoid falling backw
19. esired subtypes without selecting any type first e Press the blue button to exit the type and subtype list e After filtering all your desired digital TV programmes will be highlighted Add schedule Option Press Option on the remote control to bring up the Schedule list menu For details on scheduled recording refer to the Schedule list section 3 Press Guide Exit to exit the EPG and switch to the selected channel PVR Personal Video Recorder Allows you to record non encrypted TV programmes Before you use the function connect a USB drive to the set first Note Feature is available only in selected products and due to specific TV network limitations and country technical requirements might not be available in product or place of installation Feature might also be blocked by TV network due to copyright protection HD content recording protection Please use Option on the remote control to check if feature is available in your product 13 Chapter 6 1 Press Option on the remote control and select Quick access gt PVR 2 Press OK P to enter 3 Press the red button to start recording the record file is put into a folder named after the channel number under the PVR folder in Media center gt Video A lt gt to adjust the recording duration the green button to stop recording manually in normal operation the recording will stop automatically when the recording duration has passed 4
20. g to be watching the TV for a lengthy period of time switch it off completely by removing the plug from the mains power socket During thunderstorms we recommend that you disconnect the TV set from the mains and aerial so that it is not affected by electrical or electromagnetic surges that could damage it For this reason keep the mains and aesfat ckets accessible so they can be disconnected if necessary Unplug the TV set immediately if you notic t giving off a smell of burning or smoke You must never Anger any circumstances open the TV set yourself as you fsp the risk of an electric shock in doing so B K TV screen OA The TV screen used in this product is made of glass Thersifje it can break when the product is dropped or impacted upon by other objects e The TV screen is a very high technology product giving you s finely detailed pictures Occasionally a few nonactive pixels may appear on the screen as a fixed point of blue green or red This does not affect the performance of your product 4 Care Use a glass cleaning product to clean the screen and a soft cloth and mild detergent to clean the rest of the set Important Using strong detergents alcohol based and abrasive products may damage the screen Dust the vents at the back and sides regularly Using solvents abrasive or alcohol based products could damage the TV set If an object or liquid enters the appliance unplug it immediately and have it check
21. hedule into your schedule list press the red button first to display Schedule list Then Channel number use lt gt to select the channel number Start date use the numeric buttons to set the recording date Start time set the start time of the recording Stop time set the stop time of the recording EN O a Other information Schedule type im Set Reminder to be eine that you can switch to the scheduled progr me when the time you have set comes When time is out and you do not execute any operation the dialogue box will disappear and no furthiog operation will be executed Qh Set Record if you really want to start your w scheduled recording when the time you have gt set comes When time is out and you do not cA execute any operation scheduled recording will start automatically Repeat type set different repeat modes for the recording 4 Press A lt gt to select Add then press OK to add the schedule you set into your schedule list 5 Press the red button to repeat above procedures to add another schedule 6 If you wish to edit or delete a schedule select it and press OK to enter 7 Press Exit to close the menu MHL Mobile High Definition Link not available for some models You can use the following functions by connecting the TV HDMI port identified with MHL and the USB port of mobile phone or similar device with an MHL cable Charge your mobile phones from the TV Two way
22. his function to play back music if available 1 Select Media center gt Music then press OK to enter the main file content browser 2 Use A lt gt to select a song in either main or Viewing photos playing music and watching sub file content browser in the same way as in videos from a USB storage device photo display function press Menu to display the music menu in folder mode Sort Sort folders and songs by Name Genre Artist or Album Edit Copy paste or delete a selected song Parser You can select Recursive to display Your TV is fitted with a USB connector that enables you to view photos listen to music or watch videos stored on a USB drive Supported file formats Photo JPEG songs from all sub file folders Music MP3 3 Select a song press OK to play and automatic Video AVI MP4 MPG MPEG TS playback begins from the selected song Press Notes Some USB keys and USB products like Menu to display the music menu in the browser digital cameras or mobile phones are not mode You can play or pause the song select fully compatible with USB 2 0 standard so different play modes etc they may not work with the TV multimedia Show lyrics This option is available for the player Not all USB keys or devices are songs with lyrics Select it and use lt gt to turn compatible with the USB function Not all on off lyrics synchronized display above formats are recognised The encoding Audio only Select and pre
23. ing a preferred subtitle language EN Op Using more of your TV Turning on off subtitles eg x 1 Press Menu on the remote cont and select Options gt Subtitle b 2 Press OK P to enter Refer to Figure74 3 Select the Subtitle option and press lt 7 to select On Off to turn on off subtitles ET Enabling subtitle languages on digital TV chann ls 1 Press Menu on the remote control and select oA Options gt Subtitle gt Digital subtitle language 2 Press lt P to select a subtitle language as your preferred language 3 Press A to select Digital subtitle language 2nd 4 Press lt P to select a secondary subtitle language 5 Press Exit to close the menu Shortcut operation Press SUBTITLE on the remote control to directly select a subtitle language available for the selected digital TV programme Selecting a subtitle type on digital TV channels 1 Press Menu on the remote control and select Options gt Subtitle gt Subtitle type 2 Press lt P to select a subtitle type You can select Hearing impaired to display the hearing impaired subtitles with your selected language Selecting decoding page language in Teletext Press Menu on the remote control and select Options gt Decoding page language Select a proper type of language in which Teletext will display Digital Teletext language On digital TV channels depending on the broadcaster you may be able to enjoy a service with mult
24. iple initial Teletext pages in different languages This function allows you to select an available language as primary language which relates to different initial Teletext pages Press Menu on the remote control and select Options gt Digital teletext language Press lt P gt to select SPDIF type Connect the TV to an audio device through the SPDIF output To select a proper sound type for your SPDIF output press Menu on the remote control and select Options gt SPDIF type If you select PCM the SPDIF output format is PCM regardless of the programme s sound format If you select Dolby D the SPDIF output format is Dolby Digital when the programme s sound format is Dolby Digital or Dolby Digital Plus or HE AAC PCM when the programme s sound format is MPEG 10 ys 6u3 If you select Off this turns off the audio output from the audio device connected to the SPDIF output Note The options you may choose depend on the programme you are watching If you select PCM and the sound is ahead of the picture you can select SPDIF delay from Using more of your TV Using the common interface niSdule WARNING Switch off your TV be e inserting a common interface module Be sure tg follow the instructions described below Wrong if sertion of a common interface module may damag poth the module and your TV 2 1 Following the directions printed on the cori the Options menu and press lt gt t
25. layed after the name of the related connector in the source list when selecting Source in the Menu or EN gt Using more of your TV pressing Source on the remote Gra or OK on the TV set Note Not all models have OK i the set Using Electronic programme guide w EPG is an on screen guide that displays schediujed TV programmes You can navigate select view ES record programmes gt 1 Press Guide on the remote control the Now Cr and Next EPG menu will appear which allows 6 A Q you to get information about the current or next programme playing on each channel Navigate through the different programmes using the navigation buttons on the remote control 2 Use the colour buttons to view the 8 Days EPG Prev day Red List the previous day s EPG Next day Green List the next day s EPG View detail Yellow Display the description of this programme if available Type filter Blue Programme guide filter for digital TV programmes e Press the blue button to display the programmes type and subtype if available lists Navigate through the different types and subtypes using the navigation buttons on the remote control Select one or more types which you want to highlight from the Type list press OK to select or deselect A checkmark will appear to the left of the type when selected When you select a type all its subtypes will be selected accordingly Also you can select some d
26. n also be used for MHEG buttons function Lang To select a sound type available for selected analogue TV programme to select an audio language available for selected digital TV programme EN 6 UNE Getting started Important KA Batteries shall not be exposed to excessive heat such as sunshine fire or the like Remove batteries when the remote control is not to be used for a long time Batteries left in equipment may cause dam through deterioration and corrosive leakage invalidating the guarantee To protect the environment use local recycling facilities for battery disposal Dispose of used batteries 2 according to the instructions amp CAUTION Risk of explosion if batteries are replaced by an incorrect type Replace only with the same or equivalent type recommended by the equipment manufacturer If the batteries in your remote control are run down you can use the buttons on your TV set In TV mode they have the same functions as the corresponding buttons on the remote control The OK button on the TV set can be pressed repeatedly to select the required source In the menus they have the following functions For models with OK button on the set For models without OK button on the set PR orPR A A PR orPRA gt PR or PR V v PR or PR V lt amp OK VOL 1 or VOL gt VOL 1 or VOL gt VOL 1 or VOL lt VOL lt 1 or VOL lt MENU or MENU or OK Switching the TV on and off 1 When the powe
27. na the input S tinds ana hy 43 g p g Q DVD player home theatre system PC headphones 5 Using Electronic programme guide a 13 Blu ray Disc player HD game console amp PVR Personal Video Recorder 0e10 Ge M Dra Seat Se areca as Ga 5 Schedule list cccssssessseecssseeeseeesssseeeeeeee 14 F Chapter 2 Getting started MHL Mobile High Definition Link 14 Q Remote control fFUNCHIONS ooecceccceeccccecccecccecccceeeee 6 Connecting MHL compatible Device 14 Switching the TV on and off cceecceeseseeeeeees 7 When using MHL 0 cceeeeeeeeeeeeeeeeeeee ees 14 Chapter 3 Installing channels Chapter 6 Other information Initial Setup corradii neo aeoees a Password in Parental Control Performing an automatic channel search g Troubleshooting see eee teers Television specifications ccceeeeeeeee es Chapter 4 Using your TV Operating Conditions 00cceeeeeeeeeee es Accessing channels ccccecceseeceeeeceeeeeaee 9 Storage Conditions ccceeceeeseeseeeereeees Watching connected devices 1 9 OSS Notice o eeccecseesssessseeseverssesesessevereseseees VOIUMG dosega retat iaaa ea VE ENE iae 9 Using TV MENUS prisci issin 9 Selecting menu language seeeeeeeeee seen eee 9 Chapter 5 Using more of your TV Setting up your favourite channels sae 1
28. o adjust interface module gently insert the module into t the delay time to synchronize the sound with common interface slot on the TV the picture 2 Push the module in as far as it will go T Link Use this function to search for CEC devices connecte to the HDMI sockets in your TV and enable one touch play and one touch standby between CEC devices Enabling or disabling T Link 1 Press Menu on the remote control then select Options gt T Link 2 Press lt gt to select On or Off if this function is turned on T Link option will be available in the Quick access menu which you can enter by pressing the Option button on the remote control Using one touch play 3 Turn on the TV and wait for the common interface function to be activated This may take several d minutes Note Do not remove the common interface module from the slot Removing the module will deactivate the digital services Accessing common interface services After inserting and activating the common interface module press Menu on the remote control and select Options gt Common interface This menu option is only available if the common interface module is correctly inserted and activated On screen applications and content are provided by With one touch play pressing the play button on for your digital TV service operator example your DVD remote control starts playback on your DVD device and automatically switches your TV to the co
29. o select or deselect it 4 Repeat this procedure to set up other favourite channels 5 Press LIST Exit to exit ECO settings 1 Press Menu on the remote control and select Picture gt ECO settings press OK gt to enter ECO settings 2 Press lt P to select desired power saving mode to achieve the desired power saving effect The Picture preset option under Picture will now be set to Personal simultaneously 3 Press Exit to close the menu Shortcut operation Press ECO on the remote control to perform the same function mentioned above Audio description Audio description refers to an additional narration track for Blind and visually impaired viewers of visual media including television programmes and movies The description narrator talks through the presentation describing what is happening on the screen during the natural pauses in the audio and during dialogue if deemed necessary You can use this feature if the current broadcast contains audio description 1 Press Menu on the remote control and select Sound 2 Press OK to enter 3 Use A V to select Audio Description press OK gt to enter use lt gt to turn this function on or off Volume level can be adjusted by using the Audio Description menu Using subtitles You can enable subtitles for each TV channel Subtitles are broadcast via Teletext or DVB T DVB C digital broadcasts With digital broadcasts you have the additional option of select
30. o set a password Use the numeric buttons to enter a four digit number for your password 0000 is too simple to be set as your password Re enter the same code to confirm the password After that you will enter the next step automatically In this step you can only press lt to return to the previous step 3 Press A to select your tuner mode Antenna or Z Cable or amp Satellite Note amp Satellite option may not be available for certain models Then follow a or b or c below a If you have selected Antenna Press OK P to enter e Press A F to select Digital amp Analogue or Digital or Analogue then press OK gt e Press A V to select Scan then press OK gt to start the automatic search for all DVB T digital and or analogue channels b If you have selected Z Cable Press OK P to enter e Press A F to select Digital amp Analogue or Digital or Analogue e If you select Digital amp Analogue press OK gt to enter Then Press A to select Scan then press OK gt Press lt P to select the scan mode if available Full or Advanced If you select Full press OK to start the automatic search for all DVB C digital and or analogue channels If you select Advanced use the numeric buttons to adjust the values for frequency symbol rate network ID and use lt P gt to EN O Installing channels select the modulation ERT then press OK to start the search f
31. or all ra digital and or analogue channels If you select Digital press OK nter then follow all the same steps as forbi ital amp Analogue above to search for all DVB C digital channels amp If you select Analogue press OK to enter press A to select Scan then press OK P to gt start the search for all analogue channels c If you have selected amp Satellite Press OK P to enter e Press A to select one antenna type Press OK gt to select one satellite then press OK to enter the next step to configure proper information related to this satellite Press OK to go back after finishing settings e Press to start scanning Note To prevent the channel setup process from being interrupted wait for the message indicating that the setup is complete 4 Before starting the scanning you can also select Skip scan to skip the initial setup process In this case to search and store your channels you may do an automatic channel search by following the instructions in the next section Performing an automatic channel search 5 During the setup you can follow the hints available at the bottom of the screen to return to the previous step by pressing lt Or press Exit to exit or interrupt the search halfway 6 Once the automatic search ends the set enters the next step automatically Press A V to select your location Shop or Home Press OK gt to confirm your selection and enter the last step 7
32. r cord is connected the TV will be turned on directly or be in standby mode If the TV is in standby mode press the or POWER button on the set or the button on the remote control to turn it on 2 To put the TV into standby mode press the or POWERI button on the set or the button on the remote control The TV set remains powered up but with low energy consumption 3 To switch off the TV unplug the mains plug from the mains outlet On certain models you have to turn on the power switch first EN 7 Chapter 3 Initial setup Initial setup involves selecting all the settings required to be able to search for and store all the analogue and digital channels you can receive Make sure that the television is switched on and follow all the steps in turn specified hereafter Note If the channel search retrieved only the analogue channels it could be caused by poor broadcasting and therefore is not covered by manufacturer warranty Manufacturers cannot be held responsible for lack of or poor broadcasting in some areas The first time you switch the set on the Initial setup wizard opens which guides you through the initial setup process Refer to Figure 1 1 Press A F to select your language then press OK gt to enter the next step 2 Press A V to select your country then press OK gt to enter the next step Note If you select France you will have to enter the Password setting menu here in order t
33. rrect source displaying DVD content Using system standby With system standby pressing the button on for example your TV remote control switches your TV and all connected HDMI devices to standby mode Note Guide Menu will be available in the sublist of T Link option when T Link function is turned on and CEC devices are connected With this function you can operate CEC devices with a virtual on screen controller and the TV remote control Note The CEC functions depend on the devices connected and it is possible that some Software update Press Menu on the remote control and select Options gt Software update Press OK to enter Refer to Figure 5 Current version Displays the current version of the software Product name Displays the product name of your set Serial number if available Displays the serial number of your set OAD Over Air Download Enables you to install the latest version of the software if available from the broadcast Select OAD and press OK gt to enter Use lt P gt to select Yes under Auto download to automatically download the latest software if devices may not interoperate correctly when available After the software has been downloaded connected to this TV The user manual or the manufacturer of the problematic device should be consulted for further information Common interface successfully you will be prompted to decide if you S want to install it righ
34. ss OK to listen to the formats of your files will determine whether music with the screen turned off Any key press or not they can be used will turn the screen on When a USB drive is detected the TV enters the 4 Press the related buttons on the remote control Media center menu directly To enter the Media to perform the available functions shown on the center menu manually press Menu on the remote function bar at the bottom of the TV screen control and select Media Video Photo Use this function to watch videos if available Use this function to display photos if available 1 Select Media center gt Video then press OK to 1 Select Media center gt Photo then press OK to enter the main file content browser enter the main file content browser 2 Use A lt gt to select a video in either main or sub file content browser in the same way as in EN 12 ys 6u3 photo display function press Menu to display the video menu in folder mode Sort Sort folders and videos by Type modification Date or Name Edit Copy paste or delete a selected video Parser You can select Recursive to display videos from all sub file folders 3 Select a video press OK to watch and automatic playback begins from the selected video Press Menu to display the video menu in the browser mode You can play or pause the video select different play modes screen modes and preset picture settings etc 4 Press the related buttons on the remo
35. t now If yes follow the on screen instructions to complete your installation You can also select to ignore the installation here Select No under Auto download to decline the Encrypted digital TV channels can be decoded with a automatic download common interface module and a card provided by a digital TV service operator The common interface module may enable several digital services depending on the operator and services you choose for example pay TV Contact your digital TV service operator for more information about services and terms Select Manual OAD download and press OK gt if you wish to search manually for the latest software Follow the on screen instructions to complete During the search press OK Exit if you wish to cancel or exit the process Changing to Shop or Home mode 1 Press Menu on the remote control and select Options gt Location EN 11 by Using more of your TV 2 Press lt gt to select your location Shop or Home 2 In the main file content browse nuse A W lt 4 P to 3 Press Exit to exit select a photo or an inner file gr Note According to the regulation of European 3 Select an inner file folder press o enter a sub Commission 2009 125 EC in Home mode TV file content browser t will be put into standby mode automatically if 4 Use A lt P to select a photo in ety main or there is no operation in 4 hours This feature sub file content browser press Menu to shay c
36. te control to perform the available functions shown on the function bar at the bottom of the TV screen Press the Info button to show or remove the function bar Time access You can access the time from digital channels following the instructions below 1 Press Menu on the remote control and select Timer gt Clock gt Auto synchronization 2 Press lt gt to select On Diagnostics on digital TV channels 1 Press Menu on the remote control and select Setup gt Diagnostics 2 Press OK P to display some signal information on the current digital channel such as signal strength frequency etc Reset shop Allows you to reset the TV to factory default settings 1 Press Menu on the remote control and select Setup then press OK to confirm Select Reset shop and press OK P to enter Use the numeric buttons to enter the password Press lt gt to select OK and press OK to confirm The Initial setup menu appears Follow the related instructions PWN Customising the input settings You can configure your TV according to the equipment you connect to it 1 Press Menu on the remote control and select Setup gt Input settings 2 Press OK gt to enter Input settings 3 Press A to select a connector your equipment is connected to 4 Press lt gt to select the type of apparatus attached to this connector 5 Press Menu to return to the Setup menu After configuring the selected source label will be disp
Download Pdf Manuals
Related Search