DVM-240 - Alecto
Contents
1. this function is disabled there is always an image and sound VOX The VOX light at the top of the display is now also lit up this feature is enabled If the baby is sleeping the picture and sound will be muted until the baby is crying 3 To store the setting and exit the menu press the button El Setting the sensitivity of VOX and AUTO MUTE D 1 To select this function use the keys cj and 9 2 Press the button O 3 To set the sensitivity use the keys cj and cj D Sound image is enabled when baby is crying softly high sensitivity RAN Sound image is enabled when baby is crying normally average sensitivity D Sound image is enabled when baby is crying loudly low sensitivity 4 To store the setting and exit the menu press twice on the button El 4 4 AUTOMATIC NIGHT VISION The camera unit includes 8 built in infrared LEDs these LEDs are automatically switched on when it becomes dark around the camera unit and automatically switched off when it becomes light These LEDs can illuminate objects up to a distance of approximately 2 meters Please note that in the darkness e when the night vision LEDs are switched on the image on the monitor will appear in black and white Please note Infrared light cannot be perceived by the human eye this means that you AN cannot see that these LEDs are on with the naked eye Depending on the type of infrared LED a red glow may however be visib2. with a damp cloth only do not use chemical cleaning products Before cleaning make sure that the mains adapters are disconnected ENVIRONMENT AND DISPOSAL The packaging of this video monitor may be recycled as used paper We recommend however that you should retain this packaging so that the equipment can be adequately packed when it is being transported Defective or dead batteries should be taken to your local depot for small chemical waste or to the special battery collection points Never dispose of batteries in your household waste Ifyou are replacing the video monitor hand in your old equipment to your supplier they will ensure that it is recycled in an environmentally friendly manner IN CASE OF NO PICTURE AND NO SOUND ls the parent unit and the baby unit turned on adapter connected battery full Is the parent unit within range of the baby unit Is the right camera selected Has the baby unit not been disabled under the influence of silence VOX Has the volume of the parent unit not been set to 0 off e If all of the above is in order take the adapter out of the wall socket and remove the rechar geable battery from the parent unit Now wait for a minute or more and then put everything back Turn the parent unit and baby unit back ON e If you still have no picture or sound please contact your dealer DECLARATION OF CONFORMITY The Alecto DVM 70 complies with the essential requirements a
3. D In the event of improper usage incorrect connections leaking and or incorrectly installed batteries use of non original parts or accessories negligence and defects caused by moisture fire flood lightning strikes or natural disasters In the event of unauthorized modifications and or repairs by third parties In the event of incorrect transportation of the equipment without appropriate packaging or if the equipment is not accompanied by this warranty card and the receipt of purchase Connection cables plugs and batteries are not covered by the warranty Any further liability in parti cular for any consequential damages is excluded Service Alecto Azi laan 12 gt s Hertogenbosch A WWW HESDO SERVICE NL Help INFO HESDO SERVICE NL HSC AN NL 31 0 73 6411 355 m Y FR 32 0 3 238 5666 LEO a
4. USER MANUAL Alecto Dvm 20 INDEX 1 2 2 1 2 2 2 3 3 3 1 3 2 4 4 1 4 2 4 3 4 4 5 5 1 5 2 5 3 5 4 5 5 5 6 5 7 5 8 5 9 5 10 5 11 INTRODUCTION c cccocconiaiciiananinn cionado anciana ainia nino EAA andanada eins 4 OVERVIEW OF FUNCTIONS occ rrrrirrirr rra 4 BABY UNIT zis PAREN EUNT aieiaa e nen deden 5 DISPLAYED ON SCREEN OF THE PARENT UNIT nn venvensennenseneenennenvenrenrenrenenne 5 HOW TO INSTALL concisa 6 BABY UNIT MONITOR UNIT HOW TO USE nnn naensersensennenrennenrenenaensennennsnnsersennennennennsnnsnnnavsnennennsnnvanvanrnennvnrnvnernennense 8 ONIOFE a coi a A a naden 8 PARENT UNIT coccion tado and CONTROLLED FUNCTIONS amp SETTINGS MENU ae AUTOMATIC NIGHT VISION venvenvennenrenrenvenrnvenrenvenvenrenrenenvenvenvenrenvenvenenvenvenvenvennn 10 TIPS AND WARNINGS ecc 11 GENERA laica A idas 11 INSTALLATION coito aia ats 11 RECEPTION INDICATION OUT OF RANGE REPORT we 11 DELAYS IN VIDEO AND AUDIO een A POWER SUPPLY eee FREE FROM INTERFERENCE 2 1 INTRODUCTION The Alecto DVM 240 is a wireless audio video monitoring system suitable for indoor use You can watch and listen to your baby continuously or set the baby monitor to automatically turn on when your baby starts to cry OVERVIEW OF FUNCTIONS BABY UNIT 1 Antenna 4 Camera Lens 2 Light sensor activates the infrared 5 Built in microphone night lighting in dark 6 On off switch a
5. ay level of brightness 1 5 aS Settings menu opened by pressing the key El Q4 Er da y Zoom menu shows which keys to use to move the image 3 1 HOW TO INSTALL BABY UNIT CAMERA Power adapter 1 Connect one of the included 6V power adapters with the 6V DC jack on the back of the baby unit Optionally you can use the adapter with the long 3m connection cord or the short 1 8m connection cord 2 Plug the adapter into a 230V socket Only use the supplied adapter with model number CS6D060080FG Make sure the baby is unable to touch the baby unit or connection cord Place the baby unit at least 2 meters zi away from the baby and bundle the long wires with tape or specially purposed wire ties 6 Table top or wall model The baby unit can be placed on a table cabinet or desk or be mounted onto the wall To mount on the wall Drill two holes in the wall next to each other with a mutual distance of 2 1cm inserting a plug and screw into each one Let the head of the screw protrude by a few millimeters Hang the baby unit up by sliding the holes already made in the camera stand over the screws in the wall pushing downwards Finally work the adapter cord neatly away using the cable brackets Positioning tips When using the unit as a baby monitor position the camera unit at a minimum distance of 2 metres from your baby and make sure that the power cable is safely tucked away To ensure an optim
6. battery for at least 15 hours before even though the indicator shows the battery is full The charging circuit for the battery is controlled electronically There is no danger of overcharging which means the adapter can be left connected continuously e Incase the set is not used for long time gt 2 months it is advisable to remove the adapter from the wall socket and remove the battery from the parent unit When resuming operation first properly charge the battery The parent unit is not waterproof and therefore only suitable for indoor use When used outdoors protect the parent unit against moisture and sand 4 1 4 2 HOW TO USE ON OFF Baby unit e To turn on slide the switch on the back of the baby unit to ON e To turn off slide the switch on the back of the baby unit to OFF Parent unit To activate the parent unit press the button for 2 seconds e To turn the parent unit off press the button again for 2 seconds PARENT UNIT Receiving Volume To increase the volume repeatedly press the button cj To lower the volume repeatedly press the button cj You can choose from 7 different volume levels and volume off e While setting the volume the level is shown at the bottom of the display Sound lights If the baby cries three sound lights will flash at the above right of the display This enables you to keep an eye on your baby when the volume is low or off or if the baby monitor is furth
7. camera and P no reception symbol will appear on the display and an alarm tone will go off every 15 seconds Once the parent unit has regained the signal from the baby unit the display will light up again 5 4 DELAYS IN VIDEO AND AUDIO The camera unit sends the video and audio to the monitor unit in digital blocks The monitor unit recreates a recognisable image and a comprehensible sound from these signals This may mean that there is a short delay between the movement or sound taking place and seeing hearing it on the monitor unit In addition the video and the audio on the monitor unit may not be exactly in sync with each other 5 5 POWER SUPPLY Baby unit The baby unit draws its power only from the 6V power adapter supplied The baby unit has no built in battery for portable use Parent Unit The parent units is powered by a 3 7V Lithium Lion rechargeable battery which can supply po wer to the parent unit from 5 to 7 hours The battery charging is shown at the top right of the display Ess Battery is full Er battery is 2 3 full E battery is 1 3 full charging is desired LJ battery is empty and the parent unit will shut down Approx 30 minutes before the battery is completely empty the lamp lights in the orange color and the icon will start to blink Every 30 seconds a sound will beep the adapter must now be connected immediately Within around 3 hours the adapter will have re charged the e
8. er away in the room Talk back e Press button 8 to talk back to the camera unit You can talk for as long as you hold the button pressed down e Q lights up at the top of the screen while talking back The call volume in the baby unit is fixed and cannot be changed by you Zoom in Press the O button to see a close up of the image Use the El 8 q or cx buttons to move up down left or right e Press the O button again for normal viewing 4 3 CONTROLLED FUNCTIONS amp SETTINGS MENU To open the menu of the parent unit press the button amp The following icons will be displayed at the bottom of the screen 26 Setting the brightness of the display 1 To select this function use the keys q and d 2 Press the button 0 3 To set the brightness use the keys cj and cq 4 To store the setting and exit the menu press twice on the button El more Sound automatically off when baby is sleeping 1 To select this function use the keys cj and d 2 To turn this feature ON or OFF press the button O W this function is disabled there is always noise wie this function is disabled if the baby is sleeping the sound is turned off until the baby is crying 3 To store the setting and exit the menu press the button El VOX Image and sound automatically off when baby is sleeping 1 To select this function use the keys cj and 9 2 To turn this feature ON or OFF Press the button O vox
9. le 5 1 5 2 5 3 TIPS AND WARNINGS GENERAL Read the manual carefully and follow all the instructions Never place or use the camera or the monitor in a wet or damp room or environment Make sure that heat can be adequately dissipated never cover the monitor unit the camera unit and or the mains adapter s or place them immediately next to a source of heat Use only the supplied mains adapter s connecting another type of adapter may damage the electronic equipment Make sure that the adapter cables cannot be damaged and that they cannot cause tripping or falling Never disassemble the monitor unit the camera unit and or the mains adapter s this may only be done by qualified personnel INSTALLATION The mains adapter should only be connected or disconnected when it has been unplugged from the wall socket Do not install the DVM 240 during a thunderstorm Do not touch uninsulated adapter cables unless the adapters have been disconnected from the mains power supply RECEPTION INDICATION OUT OF RANGE REPORT The strength of the signal received from the baby unit indicated at the top left of the image shown on the parent unit Full very good reception Fal good reception Fu moderate to good reception bad reception In all cases the picture and sound are shown with the same quality Once the parent unit fails to receive a signal from the baby unit out of range or the baby unit is turned off the no
10. mpty battery regardless of whether or not the parent unit is ON or OFF If the parent unit is turned ON you can follow the charging through the expiration of the battery symbol If the parent unit is turned OFF the lamp will light in the orange color and will turn green once the battery is charged 5 6 FREE FROM INTERFERENCE This Digital Video Monitoring System is digitally encoded You should therefore never receive a signal from other equipment nor will the signal from your camera unit appear on for example your neighbors monitor If the camera or monitor are located in close proximity to electromagnetic fields this may cause some disturbance to the signal audio or video In this case try a different location for the ca mera or the monitor or if possible remove the source of the interference 5 7 5 8 5 9 5 10 5 11 RANGE The range of the video monitor is up to 300 meters in the open and 50 meters indoors the range is dependent on local circumstances If the units move out of range of each other the image first freezes for a few seconds no motion followed after a few seconds by the message No link after which the screen goes black EAVESDROPPING INTERCEPTION e Itis virtually impossible to eavesdrop on intercept these Digital Video Monitor signals Not only would one need to be in range of the video monitor very expensive equipment would also be required MAINTENANCE e Clean the video monitor
11. nd light 3 Infrared LED s for night vision 7 Built in loudspeaker 8 Power adapter socket 9 Button pairing signals the camera to re connect with the parent unit 2 2 2 3 PARENT UNIT 1 On Off indicator light 1112115 z 2 On Off push button 3 VOX light Lights up when the VOX function is activated N 4 Sound indication light 060 VOX 0 O 5 Display 6 ZOOM key 7 Volume higher also key A to move image up when in 5 zoom mode O EEE 8 volume lower also key W to move image down when in zoom mode EA 9 Built in loudspeaker l 10 Built in microphone E a 11 Folding table stand 12 Power adapter socket 72 9 13 Talk back button also key to move image to the left when in zoom mode 14 Menu push button amp also key gt to move image to the 11 0 right when in zoom mode 15 Battery compartment 16 Belt clip attached to table stand DISPLAYED ON SCREEN OF THE PARENT UNIT Fail Indication of signal strength f Indication of battery strength Q Talk back function is active Q m1 Display volume level 0 7 level O cx no sound 0 ma 4 Displ
12. nd provi sions as described in European Directive 1999 5 EC The declaration of conformity is available on the website www alecto info o Usage is allowed in all countries of the EU In France Italy Russia and Ukraine only indoor use is allowed SPECIFICATIONS Range Power supply monitor unit Power supply camera unit Frequency Camera Display Charging time for monitor unit battery Battery life for monitor unit battery up to 50m indoors up to 300 metres outdoors 3 7V Lithium Polymer battery included 6VDC 800mA G mains adapter included model CS6D060080FG 6VDC 800mA G mains adapter included model CS6D060080FG 2 4GHz digital frequency hopping FHSS 52 channels Cmos 640x480 2 4 colour LCD display 640 480 pixels lt 3 hours whether the monitor unit is switched on or off 7 8 hours these times are approximate and are dependent on usage and on the condition and quality of the batteries WARRANTY The Alecto DVM 240 comes with 24 months warranty from the date of purchase During this period we guarantee that any defects caused by errors in materials or construction will be repaired free of charge This at the importer s discretion WHAT TO DO If you notice a defect first consult the manual If the manual gives you no definitive answer consult the Alecto service department through WWW ALECTO INFO or the supplier of this video monitor THE WARRANTY IS VOI
13. um range it is best to position the camera unit as high as possible away from large metal surfaces e The camera is not waterproof and is therefore only suitable for indoor use If used outdoors the camera unit must be protected from moisture and sand 3 2 MONITOR UNIT Power supply The monitor unit may be powered directly by the supplied rechargeable battery or via the supplied mains adapter As soon as you connect the mains adapter the battery will be charged so that you can also use the monitor unit in a mobile manner Battery 1 Open the battery compartment of the parent unit by clicking open the battery cover on the back of the parent unit 2 Connect the plug as shown in the battery compartment and insert the battery 3 Click the battery cover back onto the parent unit Do not use force when connecting the plug and inserting the batteries Only use the provided rechargeable Li ion batteries 3 7V 1000mAh Power Adapter 1 Connect the other 6V power adapter to the DC 6V jack on the left side of the parent unit 2 Plug the adapter into a 230V socket Use only the power adapter provided with model number CS6D060080FG Ensure that the power cable cannot be stumbled over causing a fall Bundle the long wires with tape or specially purposed wire ties Charger To charge the battery connect the power adapter to the parent unit and insert the power adapter into a 230V wall socket For the first time use charge the
Download Pdf Manuals
Related Search