SoundStrip® Sound Bar Speaker System User`s Guide: SBX5065KU
Contents
1. United States and in other countries 2013 7 3 10 01 05 Oo Introduction Safety icons This guide contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries damage to your equipment or loss of data These safety cautions have been classified according to the seriousness of the risk and icons highlight these instructions as follows VWEVTTA g indicates an imminently hazardous situation which if not avoided will result in death or serious injury AWARNING Indicates a potentially hazardous situation which if not avoided could result in death or serious injury A CAUTION Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury CAUTION Indicates a potentially hazardous situation which if not avoided may result in property damage NOTE Provides important information Supplied Accessories Remote Control SE R0429 with Batteries AAA x 2 User s Guide this manual Quick Start Wall Mounting template Switching power supply AC Adapter Warranty Stop Return Sheet SBX5065KU_IB_R6 indd 6 2013 7 3 10 01 05 SoundStrip front panel SoundStrip speaker system controls VOLUME BASS VOLUME MODE INPUT BIANDEV pe Ue N I 1 2 3 4 5 6 M 6066006 a Item Description Functi2. A TREBLE v Press to adjust the treble volume level SBX5065KU_IB_R6 indd 10 2013 7 3 10 01 07 11 Installing the batteries Install the batteries AAAx2 matching the polarity indicated inside the battery compartment of the remote control 1 Open the battery cover CZ Sample Illustration Remote control Opening the battery cover 2 Insert batteries Make sure to match the polarity marks on the batteries to the marks indicated in the battery compartment o e Sample Illustration Remote control inserting the batteries 3 Replace the battery cover A WARNING Never throw batteries in a fire Doing so may cause the batteries to explode CAUTION Donotexpose batteries to excessive heat such as sunshine fire etc NOTE Dispose of batteries in a designated disposal area Always consider the environment when disposing of batteries Always follow applicable laws and regulations If the remote does not operate correctly or if the operating range is reduced replace the batteries Always replace both batteries with new ones Never mix battery types or use new and used batteries together Always remove batteries from the remote if they are dead or if the remote control is not to be used for an extended period of time This prevents battery acid from leaking into the battery compartment SBX5065KU IB R6 indd 11 2013 7 3 10 01 08 12 SoundStrip speaker
3. Do not place anything on top of this unit 16 Do not place the apparatus on amplifiers or equipment that may produce heat 17 Never block or cover the slots or openings in the unit Never place the unit ona bed sofa rug or similar surface too close to drapes curtains or walls or in a confined space such as a bookcase built in cabinet or any other place with poor ventilation The slots and openings are provided to protect the unit from overheating and to help maintain reliable operation 2013 7 3 10 01 05 Additional Safety Instructions 18 If the apparatus should emit smoke or an unusual odor immediately disconnect the power cord from the wall outlet Wait until the smoke or smell stops then ask your dealer for a check and repair Neglecting to do so may cause fire 19 During thunderstorms do not touch the connecting cables or the apparatus 20 Warning To prevent spread of fire keep candles or other open flames away from this product at all times USA Federal Communications Commission Statement FCC Compliance Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Interference This equipment has been tested and found to comply with the limits for a Class B dig
4. Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any of the ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 10 Only use attachments accessories specified by the manufacturer 11 Unplug this apparatus during lightning storms or when unused for long periods of time 12 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any N O 0 s ON oo SBX5065KU IB R6 indd 3 way such as the power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 13 Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 14 Never expose the apparatus to dripping or splashing or place items such as vases aquariums any other item filled with liquid or candles on top of the unit 15
5. or disconnecting the AC power cord grip the plug and not the cord itself Pulling the cord may damage it and create a hazard When you are not going to use the unit for a long period of time disconnect the AC power cord On Recycling This unit s packaging materials are recyclable and can be reused Please dispose of any materials in accordance with your local recycling regulations Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes Copyright This guide is copyrighted by Toshiba America Information Systems Inc with all rights reserved Under the copyright laws this guide cannot be reproduced in any form without the prior written permission of Toshiba No patent liability is assumed however with respect to the use of the information contained herein 2013 by Toshiba Corporation All rights reserved Notice The information contained in this manual including but not limited to any product specifications is subject to change without notice TOSHIBA CORPORATION AND TOSHIBA AMERICA INFORMATION SYSTEMS INC TOSHIBA PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHN
6. s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in this User s Guide WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE DO NOT OPEN THE CABINET REFER SERVICING TO QUALIFIED PERSONNEL ONLY TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC POWER UTLET THEN FULLY INSERT CHANGES OR MODIFICATIONS MADE TO THIS EQUIPMENT NOT EXPRESSLY APPROVED BY TOSHIBA OR PARTIES AUTHORIZED BY TOSHIBA COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT To ensure proper use of this product please read this User s Guide carefully and retain for future reference Should the unit require maintenance contact an authorized service location Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure The symbol for Class II 0 Double Insulation Warnings The mains plug is used as disconnect device and it should remain readily operable during intended used In order to disconnect the apparatus from the mains completely the main plug should be disconnected from the mains socket outlet completely Important Safety
7. 14 11 LINE IN jack Connects other AV devices through the LINE IN jack see Connect audio through an analog audio cable section on page 15 12 DC IN jack Connects to the power supply see Connecting to a switching power supply AC Adapter on page 15 13 HDMIS IN jack 1 amp 2 HDMI High Definition Multimedia Interface cable connects to devices that have an HDMI output See Connecting to a compatible device section on page 13 14 HDMI OUT jack Audio Return Channel ARC enables the audio signal of the TV to be sent to the SoundStrip via the HDMI cable See Connecting to a TV using an HDMI ARC cable on page 13 SBX5065KU IB R6 indd 8 2013 7 3 10 01 05 Subwoofer 15 16 17 18 19 Sample Illustration Subwoofer connections l Item Description Functions 15 Bass port 16 Subwoofer Speaker 47 WIRELESS LINK button Press to pair the subwoofer with the SoundStrip WIRELESS LINK indicator The indicator is red when the wireless link is activated 18 POWER switch Switch to turn ON OFF the subwoofer l 19 Power cord Connects to a standard AC outlet to supply power to the subwoofer Ex SURROUND SOUND OVER 2 SPEAKERS RICH BASS RESPONSE S S e TruSurround HD SRS TruSurround HD SRS TruSurround HD delivers immersive and natural surround sound without the need to add cumbersome rear speakers TruSurround HD also improves vocal clarity to ensure dialog i
8. D Player s Set Top Box not supplied m C tee Sample Illustration Analog audio connections SBX5065KU_IB_R6 indd 14 2013 7 3 10 01 09 15 2 Connect a 3 5mm cable not included from the LINE input jack on the SoundStrip to the other device 3 Press the INPUT button to select the LINE IN mode and the display will show LINE IN Portable music player or not Supplied other Audio Devices Sample Illustration 3 5mm connection to audio device Connecting to a switching power supply AC Adapter CAUTION Using a switching power supply AC Adapter other than the one supplied with the unit may damage the unit Before use ensure the rated voltage of the switching power supply AC Adapter matches your local voltage The included switching power supply AC Adapter is for use with this unit only Do not use it with other equipment If you are not going to use the unit for an extended period of time disconnect the switching power supply AC Adapter from the wall outlet Whenever the switching power supply AC Adapter is plugged in to a wall outlet the switching power supply AC Adapter will draw some power even when the unit is turned off Is E E SJ E Sample Illustration Connecting the switching power supply AC Adapter N Va A Subwoofer Sy SBX5065KU IB R6 indd 15 2013 7 3 10 01 09 16 Subwoofer wi
9. ICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL CONSEQUENTIAL SPECIAL OR EXEMPLARY DAMAGES WHETHER BASED ON TORT CONTRACT OR OTHERWISE ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF Trademarks SoundStrip is a registered trademark of Toshiba America Information Systems Inc 6 Bluetooth The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Toshiba Corporation is under license Blu ray and the logo are trademarks of the Blu ray Disc Association DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are registered trademarks of Dolby Laboratories Google Android and Google Play Store are trademarks of Google Inc SBX5065KU_IB_R6 indd 5 Home The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries TruSurround HD SRS and the 99 symbol are used under license from DTS Licensing Limited S S e 2126 HD All other brand and product names are trademarks or registered trademarks of their respective companies The N Mark is a trademark or registered trademark of NFC Forum Inc in the
10. TOSHIBA Leading Innovation gt gt gt SoundStrip Sound Bar Speaker System User s Guide SBX5065KU If you need assistance Toshiba s Support Web site support toshiba com For more information see Troubleshooting on page 18 in this guide Owner s Record The model number and serial number are on the back and underside of your SoundStrip Record these numbers in the spaces below Refer to these numbers whenever you communicate with your Toshiba dealer about this SoundStrip Model name Serial number SBX5065KU IB R6 indd 1 2013 7 3 10 01 04 Contents gesti EA 6 Safety icons used in this manual esses 6 SoundStrip speaker system controls sse 7 Remote CONT OI er er eti eo ttes 10 SoundStrip speaker system placement ooooililnnnnnntit 12 SoundStrip speaker system connections es 13 Iudae 18 SE CANO OS seassa cutis em o tUa e iterat tiaraa REE ie Eii 19 Maintenance esses ennt a ea eaa nni 19 SBX5065KU IB R6 indd 2 2013 7 3 10 01 04 Safety Precautions aN A A RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING SHOCK HAZARD DO NOT OPEN DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE The lightning flash with an arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product
11. e enables the audio signal of the TV to be sent to the SoundStrip via the HDMI cable The HDMI cable is not included and must be purchased separately Be sure that the connected TV has an HDMI ARC compatible terminal To connect the HDMI ARC cable 1 Connect an HDMI cable from the HDMI output jack on the SoundStrip to the HDMI input jack on the TV 2 Press the INPUT button to select the HDMI ARC mode and the display will be shown ARC High Definition TV HDMI IN ARC not supplied Sample Illustration SI Te a HDMI OUT ARC connection NOTE Do nottilt the connector when inserting it into the HDMI jack and make sure the shapes of the jack and the connector are aligned properly If your TV is not HDMI ARC compliant connect your SoundStrip to the TV through a standard HDMI connection The optical digital audio cable connections is needed when the HDMI cable is connected to a terminal that is not HDMI ARC For more information please refer to Connecting to an audio system on page 14 Connecting to a compatible device You can output the audio signal from the compatible device e g Blu ray player DVD player etc with this SoundStrip and pass the signal through to your TV 1 Connect an HDMI cable from the HDMI input jack on the SoundStrip to the HDMI output jack on the other device 2 Connect an HDMI cable from the HDMI output
12. he remote control to ensure the SoundStrip is not muted No sound from the subwoofer Move the subwoofer closer to the SoundStrip Ensure the subwoofer is turned on Turn the subwoofer power switch to ON Press the WIRELESS LINK button on the back of the subwoofer to re link the subwoofer with the SoundStrip Remote control does not work Check the following properly The batteries are inserted correctly The batteries are new The remote control is pointed directly at the remote sensor of the unit The remote control is not being used from too far a distance from the unit Nothing is obstructing remote sensor located on front of the unit Connection NFC is not Keep the device close to the system until the device vibrates available Check the NFC function of the device is set to on SBX5065KU_IB_R6 indd 18 2013 7 3 10 01 09 1 co Specifications NOTE These models comply with the specifications listed below Designs and specifications are subject to change without notice These models may not be compatible with features and or specifications that may be added in the future Main unit Power requirements DC 27 5V 3 2A Power output 75 watts per channel at 4 ohms 1 kHz THD10 Power consumption 27W Impedance 40 Dimensions 44 6 x 3 x 2 3 1133 x 76 x 57mm width x height x depth Weight 5 1 Ibs 2 3kg Subwoofer Power requirements AC 120 60Hz Power output 150 watts at 3 ohms 100H
13. isconnect Bluetooth enabled device Press the INPUT button to select Bluetooth mode until the display on the SoundStrip is shown BT 2 Select disconnect or unpaired menu on paired Bluetooth enabled device The SoundStrip become able to pair with another Bluetooth enabled device NOTE The SoundStrip must disconnect or unpaired from a previous paired device in order to properly pair with another Bluetooth enabled device For details please refer to the user manual of your Bluetooth device SBX5065KU_IB_R6 indd 16 2013 7 3 10 01 09 17 Bluetooth connection by NFC NFC Near Field Communication is a technology enabling short range wireless communication between various devices such as mobile phones and IC tags By just touching the SoundStrip where the N mark is located with an NFC compatible device the SoundStrip is turned on automatically and then paired and connected with the various devices such as mobile phones To locate the N mark on the unit please see page 7 1 Start and turn on the NFC function on the device Your Bluetooth must be in active or ON mode from your pairing device Keep touching the device on the N Mark of the SoundStrip until the device vibrates or a message pops up the Bluetooth will be paired automatically 2 Touch the SoundStrip with the device again to disconnect In order to avoid unintentional disconnection it is advised that you place yo
14. ital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help SBX5065KU IB R6 indd 4 21 CAUTION Always use the TOSHIBA AC adapter that was provided with the product or use AC adapters specified by TOSHIBA to avoid any risk of fire or other damage to the product Use of an incompatible AC adapter could cause fire or damage to the product possibly resulting in serious injury TOSHIBA assumes no liability for any damage caused by use of an incompatible adapter Bluetooth Wireless Technology and Your Health The products with B
15. jack on the SoundStrip to the HDMI input jack on the TV 3 Press the INPUT button to select the HDMI mode and the display will be shown HDMI 1 or HDMI 2 Blu ray i DVD Player HDMI OUT i f p cC S High t A j a s Definition Homem not suppiie TV CS D 85 gt Sample Illustration HDMI compatible device connection SBX5065KU IB R6 indd 13 2013 7 3 10 01 08 14 Connecting to an Audio System You can connect your SoundStrip to an audio system to play audio from other devices Connect audio through a digital optical cable 1 You can connect a optical cable from the OPTICAL input jack on the SoundStrip to the OPTICAL output jack on the other device 2 Press the INPUT button to select the OPTICAL mode and the display will show OPT 1 or OPT 2 NOTE When your SoundStrip and TV are connected through HDMI ARC an audio connection is not required Blu ray DVD Player oR Set Top Box 1 eS not supplied 4 gt Sample Illustration Digital optical cable connections Connect audio through an analog audio cable You can connect an audio cable not included from the L R AUX input jack on the SoundStrip to the Audio output jack on the other device 1 Press the INPUT button to select the AUX IN mode and the display will show AUX Blu ray DV
16. luetooth wireless technology like other radio devices emit radio frequency electromagnetic energy The level of energy emitted by devices with Bluetooth wireless technology however is much less than the electromagnetic energy emitted by wireless devices such as mobile phones Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations TOSHIBA believes Bluetooth wireless technology is safe for use by consumers These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature In some situations or environments the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization These situations may for example include in any other environment where the risk of interference to other devices or services is perceived or identified as harmful If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment e g airports you are encouraged to ask for authorization to use the device with Bluetooth wireless technology prior to turning on the equipment 2013 7 3 10 01 05 Precautions On Safety Do not handle the AC power cord with wet hands When connecting
17. on 1 VOLUME button Press to adjust the volume level 2 BASS VOLUME button Press to adjust the bass volume level 3 MODE button Press to select the surround mode from Stereo SRS TruSurround HD SRS TruBass 4 INPUT button Press to switch between HDMI 1 2 HDMI IN ARC HDMI ARC BT Bluetooth OPT 1 2 OPTICAL IN AUX AUX IN or LINE IN 5 STANDBY button Press to turn on the unit or place it into standby mode To completely turn the unit off you must unplug the switching power supply AC Adapter 6 NFC N Mark NFC tag indicator touchpoint In NFC tag applications the N Mark is used to identify the position over an NFC tag where the consumer can align an NFC enabled device to initiate an NFC interaction 7 Remote Sensor Receives the signal from the remote control 8 Standby Indicator Indicates whether the unit is ON or in STANDBY OFF mode Light On The unit is in STANDBY Light Off The unit is turned ON SBX5065KU IB R6 indd 7 2013 7 3 10 01 05 8 SoundStrip back panel Sample Illustration Back panel connections Item Description Functions 9 OPTICAL IN jack 1 amp 2 Connects the optical audio input to another device see Connecting to an Audio System on page 14 10 AUX IN jack L R Connects other AV devices through the AUX IN jack see Connect audio through an analog audio cable section on page
18. reless connection In order to use the subwoofer you must pair it with the SoundStrip 1 Connect the power cord to a wall outlet 2 Turn on the SoundStrip 3 Turn the ON OFF switch on the back of subwoofer to the on position 4 The SoundStrip and the subwoofer will automatically pair up The pairing indicator located in upper right corner of the rear panel will appear red when the wireless link is activated NOTE When the wireless link is deactivated the SoundStrip will show NO SUBWOOFER on the front panel display You can press and hold the button onthe remote control for 8 seconds in HDMI9 2 mode And then press and hold the WIRELESS LINK button of the subwoofer for approximately 5 seconds until the red indicator is flashes The SoundStrip will show PAIRED when the SoundStrip and the subwoofer link are active Playing back via Bluetooth enabled devices 1 Press the INPUT button on the remote or using the speaker system controls to select Bluetooth mode as indicated when the display shows BT Your pairing device must have the Bluetooth feature turned on 2 Once the SoundStrip is detected by your Bluetooth enabled device select the Toshiba SoundBar on your device 3 Enter the PIN code PIN code 0000 4 When this unit successfully paired with your Bluetooth device it will appear CONNECTED 5 Select the desired music and press the PLAY button on your device D
19. s always clearly understood even when challenged by loud sound effects common in today s soundtracks Additionally TruSurround HD uses specialized technologies to provide rich enveloping bass up to an octave beyond what the speakers are normally capable of producing while adding crisp clear high frequency S detail all together providing a truly compelling listening experience 7 DIALOG CLARITY HIGH DEFINITION CLARITY Sample Illustration SRS TruSound HD SBX5065KU IB R6 indd 9 2013 7 3 10 01 07 10 Remote control 1 1 Item Description Operation 1 MUTE Press to turn the sound off 2 Press again to cancel 3 2 CEC Press to turn the HDMI CEC on off 3 VOLUME v Press to adjust the volume level 4 9 jea PRE NEXT Press to go to the last track or advance 5 10 to the next track in Bluetooth mode mn PLAY PAUSE Press to play pause the track in 6 Bluetooth mode 4 EQ Press to select the sound setting Flat Rock Pop Jazz Classic Movie eine When in stereo mode use EQ to select your settings Sample Illustration 5 ABASS v Press to adjust the bass volume level Remote control L 6 A SUB v Press to adjust the subwoofer volume level 7 POWER Press to turn the SoundStrip ON OFF 8 INPUT Press to select the source HDMI 1 2 HDMI IN ARC HDMI ARC BT Bluetooth OPT 1 2 OPTICAL IN AUX AUX IN LINE IN 9 SRS Press to select the Stereo SRS TruSurround HD SRS TruBass 10
20. system placement The SoundStrip can be placed freestanding on a table or mounted on a wall For the best surround sound experience place your subwoofer as shown below NOTE Place the subwoofer at least 11 8 300mm away from the TV ok 300mm SoundStrip Subwoofer Sample Illustration Subwoofer placement Placing the unit on a wall The SoundStrip requires additional mounting hardware that must be purchased separately 1 Place the wall mounting template on the wall and then mark the locations of the screw holes 2 Drill the screws not supplied into the wall carefully 3 Gently hang the SoundStrip onto the screws in the wall NOTE amp We recommend that wall mounting be carried out by a professional The stand s key holes are intended for use with 8 Imperial or M4 Metric pan head screws Make sure that the wall mounting screws are fixed securely enough so that it meets safety standards Allow at least 2 5 cm separation in all directions between the SoundStrip and other AV equipment such as your TV or Set Top Box Itis recommended that all cables AC adapter and Audio cables be connected to the SoundStrip before placing it on the wall Sample Illustration Wall mount screwed to the wall SBX5065KU IB R6 indd 12 2013 7 3 10 01 08 13 SoundStrip speaker system connections Connecting to a TV using an HDMI ARC cable This featur
21. ur device away from the N mark once connected NOTE The NFC function is built into Android devices powered by Android 4 1 Jellybean or later f your device is powered by a previous version than Android 4 1 Jellybean you must download the relevant application from Google Play Store to use the NFC function The position of the NFC antenna differs on devices Check where the NFC antenna is located before connecting If your device is covered with a thick case the connection may not succeed For details please refer to the user manual of your NFC device SBX5065KU IB R6 indd 17 2013 7 3 10 01 09 18 Troubleshooting Problem Solution The unit does not switch on Make sure it is plugged into a AC power outlet and the outlet is turned ON Press the STANDBY ON button located on the top of the SoundStrip and check to see if the STANDBY ON indicator turns off Turn the subwoofer power switch to ON No sound from the SoundStrip Press the VOL button of the SoundStrip Ensure the source you have selected is outputting audio If you are using audio out from your TV please ensure your TV is configured to output audio see TV s menu settings Ensure your audio connections are properly made check that you don t have any loose connections Ensure you have selected the correct source input the display of the SoundStrip will shown the currently selected source input Press the MUTE button on t
22. z THD10 Power consumption 34W Impedance 30 Dimensions 7 5 x 13 9 x 13 2 193 x 355 x 336mm width x height x depth Weight 14 5 Ibs 6 6 kg Maintenance Servicing Please refer to relevant topics in Troubleshooting on page 18 before returning the product If this unit becomes inoperative do not try to correct the problem by yourself There are no user servicable parts inside Turn off unplug the power plug and please call our helpline to locate an Authorized Service Center Cleaning the cabinet Never use a solvent thinner benzene or alcohol to clean the unit Do not spray insecticide liquid near the unit Such chemicals may discolor the surface or damage the unit SBX5065KU IB R6 indd 19 2013 7 3 10 01 10 TOSHIBA Leading Innovation gt gt gt SBX5065KU_IB_R6 indd 20 2013 7 3 10 01 10
Download Pdf Manuals
Related Search