Tire Tread Depth Gage User`s Manual !
Contents
1. No 99MANO01B1 SERIES No 700 Tire Tread Depth Gage User s Manual SAFTY PRECAUTION To ensure operator safety use the instrument in conformance with the directions and specifications given in this User s Manual CAUTION If you swallow the battery by accident immediately contact a physician NOTES ON USAGE IMPORTANT When handling the battery do not recharge it disassemble it or do anything else that may cause a short If the Depth Gage is not used for 3 months or more the battery may leak and damage the Depth Gage therefore remove the battery and store it separately from the Depth Gage This Depth Gage is a sensitive electronic instrument that may break if dropped Be sure to handle it with care Do not place the Depth Gage in a location exposed to direct sunlight in a car in hot weather or near fire Do not use the Depth Gage in a location exposed to water or oil Do not disassemble the Depth Gage 1 Name of each parts CI Power ON ZERO switch f 2 Power OFF switch ae A 3 Beam BE 4 Contact Point a FO onl 5 Measuring faces H Display panel D Inch mm switch only for Inch mm type 2 Specifications Measuring range 0 25mm Resolution 0 1mm Accuracy 0 2mm Setting the battery Battery Button type battery SR44 one Battery life Approx 2 years 3 Setting the battery This Depth Gage comes with a battery removed Set the battery as illustrated a2. t the figure at right Slide and remove the battery compartment lid in the direction of the arrow a and b Set the battery with the side facing up and replace the lid Be sure to use an SR44 battery NOTE 1 If operation anomaly can not be cleared with the switches reset the battery 4 Operating the Depth Gage 1 While remove and stop the beam in the direction of the arrow 3 press the power ON ZERO switch 1 0 0 will be displayed on the display panel 6 2 Push the beam 3 when the displayed value is stable take measurements 3 Press the power OFF switch 2 and turn off the power Measurement NOTE 2 workpiece After you set a starting point by pulling the beam on the right please make sure the zero point on glass and a mirror and even desk superiors When the indicated value is not less than 0 3mm please stop using it and ask Repair consultation of the store etc In performing more exact measurement please use it after a starting point set by applying a contact point to glass and a mirror and even desk superiors Glass and a mirror and even desk superiors Mitutoyo will not be held liable for any damage or lost profits arising from the use off this Depth Gage
Download Pdf Manuals
Related Search