GS User Manual
Contents
1. Syndrome Check Action Check Action Check Action Check Action Syndrome Check Action Check Action Is the TARE INDICATOR on Turn the scale off Remove all loads rom platter and turn on again Anything obstructing the platter Remove all obstacles Weighing result is not accurate Is the scale placed in a level condition Adjust the adjustable feet to obtain a level condition Is the scale affected by airflow vibration or RFI Place the scale away from all disturbances Is the scale calibrated correctly Contact your dealer Isthe correct weight unit employed Refer to 4 2 1 and 5 3 for weight unit setting and usage SCALE TURNED ON BUT ZERO WEIGHT CANNOT BE ATTAINED Is the platter placed correctly Insert the platter again Isanythingloadappliedtoplatter Remove all loads from platter Check Action vibration or RF Place scale disturbances away from Is the scale affect by air flow all Ti DAILY CARE AND MAINTENANCE Clean the scalewitha soft anddamp cloth If necessary apply a mild detergent Do not pour water onto the scale Donot useany harsh abrasivematerial acetone volatile solvent thinner or alcohol for cleaning Verify the accuracy of scale periodically Re calibratethescaleif necessary NOTE In some countries calibrationis restricted EO be done by an2. KEYBOARD LAYOUT AND DESCRIPTION E i cae EA pa i snp we move om MR TARE 3 jay a lm O 1 ON OFF KEY Press this key to turn scale on or off 2 MODE KEY Press this key to switch among metric and avoirdupois weight units with or without backlight optional 3 M KEY Press this keyto accumulate present weight value to memory 4 ZERO KEY Press this key to reset weight displayed to zero when unloaded 10 TARE KEY Press this key to tare off the weight of acontainerandget thenet weighingresult MC KEY Press the MR and TARE key simultaneously to clear all data stored in memory MR KEY Press this key to recall the accumulated weight value in memory ZERO INDICATOR A circle will appear next to this sign to indicate a zero weight status TARE INDICATOR An arrowwill appear and point at this sign when the tare function is being employed M INDICATOR An arrow will appear and point at this sign when the memory is containing data 11 12 b For built in WEIGHT UNIT INDICATOR kg indicates the metric unit is being employed Ib indicates the avoirdupois unit is being employed LO BAT INDICATOR When this indicator appears a For dry battery version Replace the batteries with new ones or apply the power adaptor immediately CAUTIO
3. function the scale would be turned off automatically if it is not used for 4 minutes Follow the below steps to enable disable this function Turn scale off Press and hold TARE then press ON OFF Scale displays F 1 Press TARE three times Scale display F 4 Press MODE to shift between 0 _OFF and 4 _ OFF g To enable the AUTO POWER OFF FUNCTION mh 0 Qaa oW press ZERO when 4 _OFF appears h To disable the AUTO POWER OFF FUNCTION i press ZERO when 0 _OFF appears After ZERO is pressed the scale will return to normal operation status 5 5 INSTRUCTION FOR USE 1 BEFORE WEIGHING Make sure that a w he scale is turned on The platter is inserted correctly into the scale The scale is placed on a level and strong surface T The ZERO INDICATOR is on If not press ZERO to set display to zero Refer to SPECIFICATIONS for maximum zero range 2 WEIGHING Always place a load onto the platter gently to the sensor inside scale Excessive force or shock may cause damages The weight of the load would be displayed automatically It is a good practice to remove all loads from platter after weighing It would prolongthe lifetime of sensorinsidescale 5 3 SELECT WEIGHT UNIT Press MODE to shift among kg gt decimal lb lb oz gt kg weight units Refer to 4 2 1 for internal setting procedures The
4. uthorized qualified agent only a Contact your dealer for more information T he scale must be placed horizontally during transportation or long time storage Remove platter from scale before transportation or long time storage Store scale in a dry and clean place For dry battery version Before long time storage remove all batteries from battery pack
5. GS SERIES ALL STAINLESS STEEL DIGITAL WEIGHING SCALE OPERATION MANUAL PLEASE READ THIS MANUAL VERY CAREFULLY BEFORE ATTEMPT TO OPERATE THE SCALE AUGUST 1999 REV 2 Specifications subject to change without prior notice CONTENTS hee NSTALLAT ON ONS 3 KEYBOARD LAYOUT AND DESCRIPTION 4 NITIAL SE TUP 5 INSTRUCTION FOR USE 6 TROUBLE SHOOTING 7 DAILY CARE AND MAINTENANCE INSTALLATION 1 CHECK and make sure that the following items are included This operation manual Scale x 1 Stainless steel platter x 1 aaoo Power adaptor x 1 if purchased e Built in rechargeable if purchased Contact your dealer if any items are missed 1 2 INSERT the platter into the scale very carefully Noexcessive forceis required 1 3 POWER THE SCALE 1 3 1 For Dry Battery Version a Insert 4 size D UM 1 batteries into the battery pack underneath the scale or Apply the power adaptor Before plugging the power adaptor into electricity outlet check andmake surethat the input voltage of power adaptor matches with the output voltage of the outlet If not do not plug in the adaptor contact your dealer immediately CAUTION When the power adaptor i
6. N When the power adaptor is being used take out all the batteries fromthe battery pack Fail to do so may cause battery leak explosion or damages to the scale rechargeable battery version Apply the power adaptor and recharge the scale immediately Fail to do so may cause unrecoverable damages to the rechargeable battery inside scale 4 INITIAL SETUP 4 1 PLACING THE SCALE mo aa ao In order to obtain an accurate weighing result the scale must be placedona strong and level surface If required adjust the adjustable feet underneath scale to obtaina level position Refer to the bubble indicator optional for leveling condition 2 INTERNAL SETTING 2 1 Select Weight Unit The scale is equipped with metric and avoirdupois weight units Follow the below steps to enable disable the avoirdupois units Turn scale off Press and hold TARE then press ON OFF Scale displays F 1 Press TARE twice Scale display F 3 Press and hold MODE until the kg or lb sign appears Press MODE to shift between kg and lb sign To enable the avoirdupois units press ZERO when the lb sign appears Todisabletheavoirdupoisunits press ZERO when the kg sign appears After ZERO is pressed the scalewill return to normal operation status 2 2 Select AUTO POWER OFF FUNCTION Setting The scale is equipped with AUTO POWER OFF FUNCTION Under this
7. d or batteries faded out For dry battery version Replace the batteries with new ones if needed or apply the power adaptor For built in rechargeable battery version Recharge the scale for at least 8 hours before first time use or plug in the power adaptor before turning the scale on Is the power adaptor inserted properly into both the electricity outlet and the DC inlet of scale Secure bothends of the power adaptor and try again 00000 Istheloadappliedtoplatterexcess the rated capacity of scale Remove all loads from platter and try again Syndrome Scale displays Check Action Syndrome Check Action Check Action 00000 Is the platter inserted tothe scale correctly Insert the platter to scale correctly Scale turned off automatically Is the AUTO POWER OFF FUNCTION employed Refer to 4 2 2 to disable the AUTO POWER OFF FUNCTION Is the LO BAT INDICATOR on For dry battery version replace the batteries with new ones or apply the power adaptor immediately CAUTION When the power adaptor is being used take out all the batteries from the battery pack Fail todo somay cause battery leak explosion or damages to the scale Syndrome For built in rechargeable battery Version Apply the power adaptor and recharge the scale immediately Rated capacity cannot be reached Check Action Check Action
8. late a Weight to Memory When weight display is stable press M to When the LO BAT INDICATOR appears save the weight into memory Scale displays P and the M INDICATOR appears donates 5 9 1 For Dry Battery Version the total number of entries accumulated to Replace the batteries with new ones or memory apply the power adaptor immediately CAUTION CAUTION All data stored in memory will be erased when a The scale is turned off or b The weight unit is changed 5 8 2 Recall the Accumulated Weight from Memory Press MR then the scale will display the total number of entries and the total accumulated weight of all entries 5 8 3 Clear Data Stored in Memory Press MR and TARE simultaneously to clear alldatastoredinmemory Scalewill display P Oto indicate all data in memory has been erased When the power adaptor is being used take out all the batteries fromthe battery pack Fail to do so may cause battery leak explosion or damages to the scale 5 9 2 For Built in Rechargeable Battery Version Apply the power adaptor and recharge the scale immediately Fail to do so may cause unrecoverable damages to the rechargeable battery inside scale The scale can remain in operation when being recharged 6 TROUBLE SHOOTING Syndrome Scale cannot be turned on Check Action Check Action Check Action Syndrome Scale displays Is the scale powere
9. s being used take out all the batteries fromthe battery pack Fail to do so may cause battery leak explosion or damages to the scale Do not use any rechargeable batteries the scale does not recharge these batteries 1 3 2 For Built in Rechargeable Battery Version Before first time use plug the main adaptor into the wall outlet and charge the scale for at least 8 hours 1 4 RETAIN the packing materials for future transportation purposes CAUTION O n ji In most cases this unit is legal for trade nly when it is sealed and bearing a serial umber Do not break or remove the seal or the serial number Contact your dealer for more nformation or after sales service 2 SPECIFICATIONS Model No Capacity Division EXTERNAL i GS 6000 6000g Power Source Dry battery version 4 x size D UM 1 batteries Power adaptor optional Built in rechargeable version Built in rechargeable battery or Power adaptor Max Tare range Up to 100 of rated capacity ax Zero range Up to 2 rated capacity Weight Units Metric decimal pound and NOTE A pound ounce Operation 0 40 C 1 32 104 F Environment Non condensed R H 85 Specifications subject to change without notice NOTE A To comply with the law of certain countries the avoirdupois weight units may be disabled Contact your dealer for more information 3
10. weight unit employed before power off would be employed when the scale is turned on again 5 4 TURN BACKLIGHT OPTIONAL ON OFF Press MODE to shift among various weight units with backlight or without backlight Eventhoughthebacklight functionis employed backlight will be turned off a When a zero weight is detected and remains stable for 4 seconds or b When a weight remains stable for 20 seconds Backlight will be automatically turnedon again when anewweight isdetectedorakeyis pressed 5 5 SET DISPLAYED VALUE TO ZERO WHEN UNLOADED Press ZERO to eliminate a positive or negative value After ZERO is pressed the ZERO INDICATOR would appear Refer to SPECIFICATIONS formaximumzerorange 5 6 TARE OFF THE WEIGHT OF A CONTAINER Whena container is used followthe below steps to tare off the weight of it and get a net weight result a Remove all loads away from platter ake sure that the ZERO INDICATOR is on b c Place the container on the platter d Press TARE After TARE is pressed the TARE INDICATOR would appear Refer to 5 2 for weighing procedures Weight displayed is the net weight of the subject matter Refer to SPECIFICATIONS for maximum tare range 5 7 CLEAR THE TARE FUNCTION Remove all loads from platter then press TARE After TARE is pressed the TARE INDICATOR would disappear 5 8 Memory Functions 5 9 WHEN LO BAT INDICATOR APPEARS 5 8 1 To Save Accumu
Download Pdf Manuals
Related Search