Home

CA Dispatch Message Guide - support CA

1. A command entered through Report Event Processing in RPI is in error or the scheduling module cannot be found Action Correct the command entered on screen VRDMU116 or have your Systems personnel add the module indicated into the CDMSLIB used by CA Dispatch Note Type identifies the Scheduler being processed Type 1 CA Scheduler Type 2 CA 7 Module identifies the name of the module you were trying to access or actually did access RC identifies the problem encountered IN Invalid scheduling type must be 1 or 2 NF module Not Found ccc return code from the scheduler module DC980232 DC980233 DC980234 DC980235 Invalid Action x in Table Reason The action on the database is invalid must be C F or M Action Correct the event actions defined for reports Invalid Request Code x Reason DC Messages A bad request was made between modules This is an internal logic error Action Contact Technical Support Line Address Missing Reason This is an internal logic error table address is missing Action Contact Technical Support No Continuation Pointer Reason This is an internal logic error table pointer is missing Action Contact Technical Support Chapter 5 DC Messages 381 DC Messages DC980236 DC980237 DC980238 382 Message Guide Insufficient Storage for Criteria Rules Reason There is insufficient storage available for RPI task or OLV Acti
2. Action None Chapter 5 DC Messages 211 DC Messages DC900203 DC900204 DCc900205 DC900206 212 Message Guide WARNING EXPECTED SEARCHING Reason Informational message from the CA Dispatch help text batch utility Action None scrname SCREEN HELPTEXT ADDED Reason Informational message from the CA Dispatch help text batch utility Action None scrname SCREEN HEADER RECORD ADDED Reason Informational message from the CA Dispatch help text batch utility Action None HTBTUTIL RAN UNSUCCESSFULLY Reason The help text batch utility ended with errors Action Check the error messages make corrections and rerun the job DC900207 DC900208 Dc900210 DC Messages HTBTUTIL RAN SUCCESSFULLY Reason The help text batch utility ended successfully Action None INVALID PARAMETER REQUEST Reason This message is informational only Action Check the parameter and rerun the job OV VIEW NOT REFOUND nnnn ERROR Reason The CA Dispatch Online Viewing dialog could not find the first OV VIEW database record for the current screen list although it had been found previously Another Online Viewing user may have been deleted it Action Exit from the current screen then attempt the process again If the problem persists save all error information and contact Technical Support Chapter 5 DC Messages 213 DC Messages DC900211 DC900212
3. CA Opera CA Raps CA Scheduler CA Spool Contact CA Technologies Contact CA Support For your convenience CA Technologies provides one site where you can access the information that you need for your Home Office Small Business and Enterprise CA Technologies products At http ca com support you can access the following resources Online and telephone contact information for technical assistance and customer services Information about user communities and forums Product and documentation downloads CA Support policies and guidelines Other helpful resources appropriate for your product Providing Feedback About Product Documentation If you have comments or questions about CA Technologies product documentation you can send a message to techpubs ca com To provide feedback about CA Technologies product documentation complete our short customer survey which is available on the CA Support website at http ca com docs Contents Chapter 1 CADDSPL Messages CADDSP hi ievcsssiesdstciasacds sacceiancuss tesakieesidacaatsancdenseysstavaceesasedstuatesstestqesdiaevesteveticedstecdune Chapter 2 CADS Messages CADS Messagg OS ion ccic sicessvetiesdsseosascetaesssces cas obsedentubiessesetcersssbicutsucedsceccetdsososersuicessaes Chapter 3 CAHF Messages Chapter 4 CAG Messages CAG MGSSAB ES wenscccseccsecdstectecesnucnuisatncetecstneyouscnaneaseseascadectvadoacs atocesbastetag AAE in EESE Chapter
4. Chapter 5 DC Messages 251 DC Messages DC900425 252 Message Guide represents one of the following messages Error Deleting Report from LDS RC cc Reason RIDF encountered an error deleting a report from CADDSPL Action This message will be preceded by error messages from the CA Dispatch LDS I O Manager Take the specified action for the preceding message SPLHDR2 Not Found in Data Space Reason An invalid LDS Token was passed on an update request This is an internal logic error Action Contact Technical Support Invalid LDS Token Reason An invalid LDS Token was passed on an update request This is an internal logic error Action Contact Technical Support Invalid CAS9SPL Data List Reason An invalid LDS Token was passed on an update request This is an internal logic error Action Contact Technical Support Update Error RC XX Reas YY Reason An invalid return code of XX with reason code YY was returned by CADDSPL during an update function Action DC900426 DC900427 DC Messages Contact Technical Support RIDF Foreground ESTAE Routine Invoked Reason A program exception occurred in program CADSRFOO and its ESTAE recovery routine was invoked Action Re attempt the desired RIDF function If the problem persists contact Technical Support represents one of the following messages Entry Deleted by Another User Press ENTER to Refresh Reason A user a
5. REPORT RECIP REC FOR THIS DJDE EXT REC DOES NOT EXIST Reason Occurs when adding record Types 8 or 9 The prerequisite REPORT RECIPIENT record Type 3 is not on the database Action Add the Type 3 record to the database CAGLO13E CAGLO14E CAGLO15E CAGLO16E CAG Messages BASE DJDE REC FOR THIS DJDE EXT REC DOES NOT EXIST Reason Occurs when adding record Types 8 or 9 The prerequisite DJDE record Type 7 is not on the database Action Add the Type 7 record to the database BASE MAILDROP REC FOR THIS ADDRESS DOES NOT EXIST Reason Occurs when adding record Type 6 The prerequisite MAILDROP record Type 5 is not on the database Action Add the Type 5 record to the database MAILDROP UPDATE REJECTED SYSGEN NEEDED Reason Occurs when adding record Types 5 or 6 The SYSGEN required after database initialization was not performed Action See the CA Dispatch Reference Guide INPUT RECORD TYPE IN ERROR RECORD REJECTED Reason Occurs when the Type field position 1 does not contain a valid value Action Use a valid value for Type Chapter 4 CAG Messages 161 CAG Messages CAGLO17E CAGLO18E CAGLO19E CAGLO20E 162 Message Guide REPORT RECIP RECORD ALREADY EXISTS AND DUP FLAG NOT Y Reason Occurs when adding record Type 3 REPORT RECIPIENT record to be added already exists on the database Since the DUPLICATE FLAG value is not Y on the input record the record c
6. lt SPLx gt Blocks Total lt nnnnnnnn gt In Use lt nnnnnnnn gt SPLx is the CADDSPL ID Reason Informational response to the F SPLx STATUS command It describes the total number of 4 KB linear data set blocks defined to the CADDSPL and the total number of 4 KB linear data set blocks currently allocated to contain captured data sets Action None CADDSPL CADDO21I CADDO22I CADDO22W lt SPLx gt MaxDS Value lt nnnnnnnn gt Warning lt nnn gt SPLx is the CADDSPL ID Reason Informational response to the F SPLx STATUS command MAXDS is the maximum number of data sets that can be contained in the CADDSPL at any one point in time It is defined at linear data set initialization through the supplied CADDUTIL The warning indicates that the percentage threshold of the defined MAXDS value has been reached and issues a CADD134W message Action None lt SPLx gt Saturation lt nnn gt percent See message CADDO22W lt SPLx gt Saturation lt nnn gt percent SPLx is the CADDSPL ID Reason This message is either informational or a warning and provides a percent in use value issued at CADDSPL initialization and when the CADDSPL linear data set reaches 80 percent and 90 percent capacity CADD022l1 is used as an answer to the STAT command or when the percent is below the second threshold value CADDO22W is used when the percent has reached the second threshold Action If this message is
7. 366 Message Guide EXTRACT HAS BEEN IDLE FOR NNNN MINUTES Reason The extract task has had no work for the specified number of minutes This message appears after every five minutes of idle time with the number of minutes increased each time Action No action necessary This message is informational only It is provided to allow other programs such as CA OPS or CA Opera to take some action such as shutting down the task after a user determined idle period Error Allocating Archive Dataset Reason An error occurred attempting to allocate an archive output file on tape This message is preceded by a DC970029 message Action Determine if there is a problem with the tape or tape drive Archive will attempt to allocate the tape in four minutes If the problem persists contact Technical Support Error Deallocating Archive Dataset Reason An error occurred attempting to deallocate an Archive output file on tape This message is preceded by a DC970029 message Action Determine if there is a problem with the tape or tape drive If the problem persists contact Technical Support DC980090 DC980095 DC980113 DC Messages ARFGARCH ACIF Status File Error Reason An error occurred attempting to process the status file used for ACIF archiving of AFP resources Action This message is preceded by additional error messages Perform the action associated with those messages If the problem persists save all err
8. DC900214 214 Message Guide OWNER NOT REFOUND nnnn ERROR Reason The CA Dispatch Online Viewing dialog could not find the OV BASE database record for the report being viewed although it had been found previously Another Online Viewing user may have been deleted it Action Exit from the current screen then attempt the process again If the problem persists save all error information and contact Technical Support OV VIEW NOT REGOTTEN nnnn ERROR Reason The CA Dispatch Online Viewing dialog could not find the OV VIEW database record for the current screen list although it had been found previously Another Online Viewing user may have been deleted it Action Exit from the current screen then attempt the process again If the problem persists save all error information and contact Technical Support MAILDROP ADDRESS DOES NOT EXIST PRESS ENTER TO CONFIRM UPDATE Reason The maildrop being added for the recipient does not have an address defined Action Either correct the maildrop parameter if incorrect or add the required maildrop on the Maildrop Sysgen Screen VSGMU130 If a maildrop is not defined to this screen a maildrop address cannot be used and the default maximum time and pages from the Sysgen Control Information Screen will be used when processing a bundle DC900215 DC900216 DC900217 DC900218 DC Messages XXXXXXXX RECORD DOES NOT EXIST PLEASE CREATE IN xxxx Reason You are t
9. DC970320 DC970321 DC980001 352 Message Guide Status Task Checkpoint Recovery XXXXXXXX Reason This is an informational message It indicates when ENF Checkpoint Recovery of ENF Events is starting and completing If the checkpoint was cleared using the option on the VSGMU190 screen then no checkpoint will be passed and these messages will not be received m Start Chckpnt yydddhhmmssss Checkpoint recovery of ENF events is starting at the date time indicated Complete Checkpoint recovery of ENF events is complete Action None SG CTL Specifies a CADDSPL Used by Another Dispatch Region The CADDSPL Suffix and Root DSN will be initialized in SG CTL record Reason CA Dispatch determined during initialization that it was establishing a link to a CADDSPLx task that is currently defined and in use by another CA Dispatch system Action The initialization process will automatically set the CADDSPL Option fields to blank and allow the initialization to continue Update the CADDSPL Option fields Task Suffix and Root LDS DSN values on the Sysgen Control Information Screen VSGMU110 with unique CADDSPL Task Suffix and Root LDS DSN values Note that in order for the change to take effect you must recycle the CA Dispatch main region Archive Task Ending Reason As part of shutdown processing Archive is terminating cleanly Action No action required DC980002 DC Messages TASK RDBGSTAT ABENDING Reason
10. Enter an existing AFP Library Group name NO LIBRARIES DEFINED TO COPY LIBRARY GROUP Reason No AFP Resource Library Names exist for the Copy Library Group name entered on screen VSGMU255 Action Enter a Library Group name that has libraries defined to it DC900476 DC900477 DC900478 DC900479 DC Messages AFP LIBRARIES COPIED Reason The AFP Resource Library Names from the Copy Library Group definition have been successfully copied to the current AFP Library Group definition Action None NO LIBRARIES DEFINED FOR THIS RESOURCE GROUP Reason No AFP Userlib Library Names exist to be displayed on screen VSGMU246 Action Enter the required data on VSGMU246 to add AFP userlib libraries COPY RESOURCE GROUP DOES NOT EXIST Reason The Copy Resource Group entered on screen VSGMU246 does not exist as an AFP Resource Group definition Action Enter an existing AFP Resource Group name NO LIBRARIES DEFINED TO COPY RESOURCE GROUP Reason No AFP Userlib Library Names exist for the Copy Resource Group name entered on screen VSGMU246 Action Enter a Resource Group name that has Userlib libraries defined to it Chapter 5 DC Messages 265 DC Messages DC900480 DC900481 DC900482 DC900483 266 Message Guide LIBRARIES COPIED Reason The AFP Userlib Library names from the Copy Resource Group definition have been successfully copied to the current AFP Resource Group definit
11. Note This option is only valid if all of the required reports for Online Viewing reload currently exist in the Archive database Error during DIV SAVE for lt ENFSPLnn gt rc lt xxxx gt reas lt yyyy gt SPLx is the CADDSPL ID ENFSPLnn is the data space identification Xxxx is the return code of the IBM macro DIV yyyy is the reason code of the IBM macro DIV Reason The DIV SAVE function terminates abnormally This is mainly an internal error The return and reason codes give more specific information Action Contact Technical Support SPLx SNT1 address SNT2 address SPLT address SPLx SPAI address SPOIl address SPLM address SPLx SPLZ address xSPL address SPLx is the CADDSPL ID address is the hexadecimal address of the indicated modules Reason These messages are a response to the F SPLx MAP command Action None These messages are informational only Chapter 1 CADDSPL Messages 41 CADDSPL CADD150I CADD151I CADD152W 42 Message Guide SPLx Diag command Dump of bbbb Length nnnn SPLx is the CADDSPL ID bbbb is the control block SNT SNT2 SPLT APND nnn is the length of the control block Reason This message is part of the response to the DIAG command It is followed by CADD1511 messages Action None SPLx offs hhhhhhhh hhhhhhhh hhhhhhhh hhhhhhhh gt ccccceececececec lt SPLx is the CADDSPL ID offs is the line offset hhhhhhhh is the hexadecimal representation ccecc
12. or RDSTBNDL or RDSTBNDL or RDSTBNDL or RDSTBNDL or RDSTBNDL or RDSTBNDL or RDSTBNDL or RDSTBNDL or RDSTBNDL or RDSTBNDL or RDSTBNDL or RDSTBNDL or RDSTBNDL Reason Connect RD BUNDLE to RD BIN BUNDLE Disc RD BUNDLE From IX RD BUNDLE S1 Disc RD BUNDLE From IX RD BUNDLE S2 Disc RD BUNDLE From IX RD BUNDLE S3 Disc RD BUNDLE From RD BIN BUNDLE Find Current RD BUNDLE Modify Rec RD BIN Modify Rec RD BUNDLE No RD BUNDLE in RD BIN BUNDLE Set Obtain Next in RD BIN BUNDLE Obtain Rec nnnnnnnn RD BIN Obtain Rec nnnnnnnn RD BUNDLE RD BUNDLE Connected to Bin 99999999 RD BUNDLE Owner Not Found Store Rec nnnnnnnn RD BIN Various internal errors during IDMS DB calls in RDSTBNDL Action Save all information and contact Technical Support DC Messages DC980828 RDSTBNDL Bundle bbbbbbbb Not Found in Database Reason An ENF DISP145 event that was received by this Dispatch region contains a Bundle ID that cannot be found in the database This could indicate that the Bundle was created by another Dispatch running at the site and was therefore processed by that Dispatch Action This is an informational message If there are no other Dispatch regions running at the site that could have Bundle IDs by the name listed in the message check to be sure you are creating the DISP145 events correctly Chapter 5 DC Messages 409 Chapter 6 DCD
13. 1 If you are at a full screen console ensure that the message Enter Next Task Code is on your screen If not press PF4 until you see the Enter Next Task Code prompt then enter the following command START ARCH 1 If you are not in a full screen editing session but at the operator s console enter the reply number for CA Dispatch with the start command as follows R nn 99START ARCH The report archival task ARBGARCH will be restarted 1 If this message reappears immediately after entering the START command cycle the system by shutting it down STOPCADS and restarting it If this fails to solve the problem contact Technical Support immediately 2 Ifyou are able to circumvent this problem contact Technical Support at your earliest convenience Note Save all error information DC Messages DC980004 DC980005 TASK ARBGEXTR ABENDING Reason The CA Dispatch task ARBGEXTR report extract which selects reports from archival and sends them to report distribution is abending A dump of the task is written to the log file but CA Dispatch online will remain running Action Perform the following steps 1 If you are at a full screen console ensure that the message Enter Next Task Code is on your screen If not press PF4 until you have the Enter Next Task Code prompt Then enter the following command START EXTR 1 If you are not in a full screen editing session but at the operator s console enter the reply number
14. Action Contact Technical Support Error Status xxxx Reason This is an IDMS Error Status value from a database error Action None Chapter 5 DC Messages 361 DC Messages DC980073 DC980074 DC900075 362 Message Guide Error Record XXXXXXXXXXXXXXXX Reason This is an IDMS database record from a database error Action None Error Set XXXXXXXXXXXXXXXX Reason This is an IDMS database set from a database error Action None VOLSER FOR PRINT REQUEST IS IN USE ENTER CANCEL COMMAND OR PRESS ENTER TO PROCESS Reason You are trying to extract a report from the current archive tape Note that the Extract task will retry the allocation request for the Volser and the extract will only occur after the current archive tape is freed Action Press Enter to allow extract from the current archive tape or enter CANCEL to cancel the request See the Active Archive Volser Management section in the User Guide for the Report Administrator for more information about ways to free the current archive tape for use by the EXTRACT subtask DC980076 DC980077 DC980078 DC Messages ARBGDB CV Not Present Archive Task Abending Reason The External Archive database program ARBGDB cannot make connection to the main CA Dispatch region Action If the main CA Dispatch region is active restart the External Archive task S ARCH XT If the main CA Dispatch region is not active start
15. Add the Type 1 record to the database RECORD MODIFICATION REJECTED XXXX XXXX REC NOT FOUND Reason Occurs when modifying any record with xxxx xxxx as the record name The target record specified in the input record was not found Action Check the validity of the modification record Chapter 4 CAG Messages 163 CAG Messages CAGLO25E CAGLO26E CAGLO27E CAGLO28E 164 Message Guide RECORD UNLOAD REJECTED XXXX XXXX REC NOT FOUND Reason Occurs when unloading any record with xxxx xxxx as the record name The target record or mask specification in the input record was not found on the database Action Check the validity of the unload record RECORD DELETE REJECTED xxxx xxxx REC NOT FOUND Reason Occurs when deleting any record with xxxx xxxx as the record name The target record or mask specification in the input record was not found on the database Action Check the validity of the delete record INPUT RECORD FUNCTION IN ERROR RECORD REJECTED Reason Occurs when the function field position 1 does not contain a valid value Action Check the validity of position 1 of the record INVALID Type C RECORD DOES NOT FOLLOW CORRESPONDING Type B RECORD Reason Occurs when a Type C record report message definition part 2 is encountered that does not immediately follow its corresponding Type B record part 1 Action Enter the co requisite records together CAGLO29E
16. Reason A security error has been detected by the security exit Action Contact your systems programming department Chapter 5 DC Messages 197 DC Messages DCc900131 DC900132 DC900133 DC900134 198 Message Guide SCREEN nnnnnnnn JOB nnnnnnnn REPORT nnnnnnnn RECIPIENT nnnnnnnn Reason This message appears with message DC900130 and provides further information about the security violation Action Contact your systems programming department SECURITY VIOLATION REQUESTED SCREEN DENIED Reason The security exit or external security definitions do not permit you to view the selected screen Action Contact your systems programming department THIS REPORT HAS ON LINE VIEWING ENTRIES ERASE NOT ALLOWED Reason You cannot delete this report definition until all Online Viewing entries for this report have expired or are deleted Action Delete the online view entries or wait for them to expire NO REPORT DATA TO VIEW FOR SELECTION CRITERIA SPECIFIED Reason The cursor was incorrectly positioned for making the selection Action Correctly reposition the cursor and make your selection DC900135 DC900136 DC900137 DC900138 DC Messages NO REPORT DATA TO VIEW Reason There are no reports in the Online Viewing file Action No action required DEFINITION DOES NOT EXIST USE ADD FUNCTION Reason You are attempting to update MSGCLASS days and gener
17. The CA Dispatch task RDBGSTAT report status which tracks report bundles from report status distribution is abending A dump of the task is written to the log file but CA Dispatch online will remain running Action Perform the following steps 1 If you are at a full screen console ensure that the message Enter Next Task Code is on your screen If you are not at a full screen console press PF4 until you see the Enter Next Task Code prompt then enter the following command START STAT 1 If you are not in a full screen editing session but at the operator s console enter the reply number for CA with the start command as follows Rnn 99START STAT The report status distribution task RDBGSTAT will be restarted 1 If this message reappears immediately after entering the START command cycle the system by shutting it down and restarting it If this fails to solve the problem contact Technical Support immediately 2 Ifyou are able to circumvent this problem contact Technical Support at your earliest convenience Note Be sure to print the log file after the system is restarted Chapter 5 DC Messages 353 DC Messages DC980003 354 Message Guide Archive Task Abending Reason The CA Dispatch task ARBGARCH report archiving which processes reports from CADDSPL and archives them is abending A dump of the task is written but the CA Dispatch main region will remain running Action Perform the following steps
18. The use of symbolics in the Archive data set name is limited to amp RPTN and amp JOBN This message indicates that a symbolic character amp was found but did not have either of the literals RPTN or JOBN following it Action Modify the DSN Prefix field on the Sysgen Archival Control Information Screen VSGMU210 to contain valid symbolic parameters DC980083 DC980084 DC980086 DC Messages Error Accessing Archive Report From CADDSPL Spool Interface Reason An error occurred attempting to access a report on CADDSPL Action This message is preceded by additional error messages Save all error information and contact Technical Support Error Updating Archive Report On CADDSPL Spool Interface Reason An error occurred attempting to update a report on CADDSPL Action This message is preceded by additional error messages Save all error information and contact Technical Support ARCHIVE HAS BEEN IDLE FOR NNNN MINUTES Reason The archive task has had no work for the specified number of minutes This message appears after every five minutes of idle time with the number of minutes increased each time Action No action necessary This message is informational only It is provided to allow other programs such as CA OPS or CA Opera to take some action such as shutting down the task after a user determined idle period Chapter 5 DC Messages 365 DC Messages DC980087 DC980088 DC980089
19. This message is informational only Action None NO xxxxxxxx REQUESTS EXIST Reason No requests of the specified type exist Action Exit from the current screen DC900315 DC900320 DC900321 DC900322 DC Messages SECURITY VIOLATION DOWNLOAD UPLOAD NOT ALLOWED Reason This occurs on the PC Upload Request Screen VOVMU360 when the flag for PC UPLOAD is not set to Y on the PC Control Screen VPCMU100 Action Contact your Report Administrator ONLY USER DELETION NOT ALLOWED Reason This message is informational only Action None REPORT MUST GO TO ONLINE VIEWING IF DOWNLOADING TO A PC Reason PC Y and VIEW ONLINE N Action Correct the PC or View Online option PC cannot be Yes without View Online being Yes All other combinations are valid PC FILE NAME IS INVALID ONLY xxx IS VALID Reason Only 1 3 characters can follow a period Action Correct the field entry Chapter 5 DC Messages 235 DC Messages DC900323 DC900331 DC900335 DC900336 236 Message Guide PC FILE NAME USES GENS ENTER VALID GENERATION Reason If the PC file name contains GEN or V retention by generations will be used An invalid retention generation number exists not 1 99 Action Correct the Retention Generations field or remove GEN or V from the PC File field Reason An attempt was made to process an upload request but the report base definition does
20. A specific initial function has failed The xxxx is the hexadecimal value of the ENF macro return code The yyyy is the hexadecimal value of the ENF macro info code Action Save all abend information and contact Technical Support Chapter 5 DC Messages 349 DC Messages DC970316 DC970317 DC970318 350 Message Guide Bad RC from Event nnnnnnnn RC xxxxyyyy Reason This is an internal error CA Dispatch was unable to get the data for a specific event The xxxx is the hexadecimal value of the ENF macro return code The yyyy is the hexadecimal value of the ENF macro info code Action Save all abend information and contact Technical Support Status Task ending due to previous error s Reason This is an informational message It follows DC970311 message s and indicates the shutdown of the Status task Action Message DC970311 indicates a lack of customization of one CAIENF event that CA Dispatch is looking for Correct the Event customization in the CAIENF base Status Task encountered invalid JobID JOBNAME xxxxxxxx JOBID xxxxxxxx Reason This is an informational message It indicates that CA Dispatch received an Event from CAIENF that contained either a blank JobID or a JobID that does not conform to JES standards Action This may not be an error It may mean that jobs are being generated in alternate ways However CA Dispatch only process and keep Status information based on JobIDs so it will
21. CADDO26I lt SPLx gt lt taskid gt lt class gt lt destination gt lt Intercept gt lt SAPI gt lt Initial gt SPLx is the CADDSPL ID taskid is the CADDSPL task ID RPI1 RPI2 RPI3 MSG ARCH class is the JES output class processed by this task destination is the JES output destination processed by this task Intercept is the current status of the Intercept SAPI is the current status of the SAPI task Initial is the status of the Intercept or the SAPI task during the start of CADDSPL Reason Informational response to the F SPLx STATUS command that shows the current status and selection criteria of each task status for Intercept and SAPI can be one of the following Not def This process is not defined for this task Up This process is up and running Down This process is down Initing This process is starting Shut This process is shutting down Unknown _ This process is in an unknown status The value for Initial can be one of the following Start The Intercept and the SAPI task are automatically started during the start of CADDSPL Stop The Intercept and the SAPI task are automatically stopped during the start of CADDSPL Dynamic During the start of CADDSPL the Intercept and the SAPI task get the status they had during the last close process When a new task is defined its current status is stop Action None Chapter 1 CADDSPL Messages 13 CADDSPL CADDO27I1 CADDO29I CADDO30I 14 Message Gu
22. CADSDLBF XXXXXXXXXXXXXXXXXXXX Reason The binary PC download foreground program CADSDLBF encountered an error condition Action This message contains the error message text from CADSDLBF Check any previously issued messages for additional information Re attempt the transfer request If the problem persists save all error information and contact Technical Support Program CADSDLBB STAE Routine Invoked Reason The binary PC download background program CADSDLBB had its STAE recovery routine invoked Action Check the CAILOG and any previously issued messages for additional information Re attempt the transfer request If the problem persists save all error information and contact Technical Support CA CCI Open Error CC nnn Reason An error occurred while attempting to begin a binary PC download Action Check any previously issued messages from CADSXCCI for any additional information Re attempt the transfer request If the problem persists save all error information and contact Technical Support Chapter 5 DC Messages 299 DC Messages DC900623 DC900624 DC900626 300 Message Guide CA CCI Write Error CC nnn Reason An error occurred while attempting to write data during a binary PC download Action Check any previously issued messages from CADSXCCI for any additional information Re attempt the transfer request If the problem persists save all error information and contact Technical Su
23. DC970067 DC Messages Bundle Control File xxxxxx Error Reason The bundle recovery program could not read or write to the bundle control file for input or output processing Action m Review the error message s from the dynamic allocation routine that precede this message take appropriate action based on those messages m The bundle recovery program will restore from CADDSPL upon startup Start the RPI subtasks after CA Dispatch startup to rebuild the original bundles with new bundle IDs If the problem persists contact Technical Support Bundle Control File Close Error Reason The bundle recovery program could not close the bundle control file Action m Review any error message s from the dynamic allocation routine that may precede this message take appropriate action based on those messages m The bundle recovery program will restore from CADDSPL upon startup Start the RPI subtasks after CA Dispatch startup to rebuild the original bundles with new bundle IDs If the problem persists contact Technical Support Chapter 5 DC Messages 325 DC Messages DC970068 DC970069 326 Message Guide Bundle Data File xxxxxx Allocation Error Reason The Bundle Recovery program could not allocate the bundle data file for Input or Output processing Action m Review the error message s from the dynamic allocation routine that precede this message take appropriate action based on those messages m T
24. Reason DC900068 DC900069 DC900070 DC900071 DC Messages You are attempting to copy an address from one maildrop to another through the Maildrop Address Screen VSGMU135 but you specified a maildrop name that is invalid Action Check to see if you have the correct maildrop name and reenter the information COPIED ADDRESS IS DISPLAYED PRESS ENTER TO UPDATE Reason You are attempting to copy an address from one maildrop to another through the Maildrop Address Screen VSGMU135 CA Dispatch shows you the address for your confirmation before it updates its database Action Press Enter to update the database or enter CANCEL THIS BUNDLE HAS BEEN PURGED Reason The batch program PURGE has deleted some or all of the bundle information in which this report was originally included At this point we no longer have complete bundle status information Action No action required VOLSER FOR PRINT REQUEST IS IN USE CANNOT EXTRACT Reason The report you are trying to extract is contained on the volume currently being used by the archive system Action Change the current volume on VSGMU210 by blanking out the VOLSER field JOB NAME NOT ON FILE Chapter 5 DC Messages 187 DC Messages DC900072 DC900073 DC900074 188 Message Guide Reason The job name you selected is not defined in the database Action Verify your selection and reenter it JES INVALID Reason You incor
25. SPLx CADDSPLB text SPLx is the CADDSPL ID text displays the current values of General and Access Registers at specific addresses in load module CADDSPLB Reason Informational message These messages are issued in the CA Dispatch JOBLOG after command SET MSG 860 is entered This command should be entered for debugging purpose only when requested by Technical Support Action Enter command RESET MSG 860 to prevent CADD860 messages from being issued Chapter 1 CADDSPL Messages 129 CADDSPL CADD900W CADD901W CADD902W lt SPLx gt not found active Process bypassed SPLx identifies the CADDSPL environment Reason An INTERFACE parameter has been found for this environment and either no entry has been found in the CADDSNT or this entry is marked as not active Action Make sure all of the required CADDSPL environments are active and remove any INTERFACE parameter not required Max Root LDS selected lt LDSROOTx gt bypassed LDSROOTx identifies the DD card for a given LDS ROOT environment Reason 32 LDS Root DD cards have already been selected which is a limit of CADDLIST This LDSROOTx DD card will not be processed Action Make sure to not specify more than 32 LDSROOTx DD cards in the JCL lt LDSROOTx gt already selected current one bypassed LDSROOTx identifies the DD card for a given LDS ROOT environment Reason A DD card with the same DDname has already been selected The current one is rejecte
26. encountered This requirement only applies if a HI task code has been used An I O error occurred Restart the task CADDSPL error This abend will produce a SVC dump The external Archive or Extract job has been started but a request for the function does not exist Message DC980027 DC980070 DC980074 DC980078 and DC980082 are associated Investigate the execution of the job and the issuing of the online commands The external Archive or Extract job has been started but a copy of the job is already executing Message DC980028 DC980071 DC980075 DC980079 and DC980083 are associated Investigate the execution of the job and the issuing of the online commands Chapter 9 Abend and VTAM Error Codes 453 User Abends U1303 U1310 U1313 U1320 U1321 454 Message Guide The external Archive Extract or Distribution job failed to open the SYSCTL data set Message DC980029 DC980072 DC980076 DC980080 and DC980084 are associated Correct the JCL for the job and rerun An online task abends with a code of 1310 This abend is a result of the CA Dispatch storage pool having no more space to allocate to online tasks Message DC900127 or DC900101 may be generated If this abend occurs more than once update the user GEN to specify a larger storage pool To prevent a further occurrence of 1310 do the following 1 Bring CA Dispatch down clean 2 Edit member DSSYSXA and make the following change STORAGE POOL IS nnn
27. 1st HDR4 Block hhhhhhhh 1st HDR2 xxxxxxxx x is the CADDSPL ID hhhhhhhh is the token of the first SPLHDR4 block in hexadecimal format XXXXXXXX is the token of the first SPLHDR2 block in hexadecimal format Reason This is part of the informational response to the F SPLx STAT X command These values are for debugging purposes Action None Chapter 1 CADDSPL Messages 87 CADDSPL CADD5271 CADD528I 88 Message Guide SPLx Max Nbr of Appends nn Nbr HDR4 Append oo xX is the CADDSPL ID nn is the number of append LDSs connected on the Root LDS oo is the number of SPLHDR4 blocks used to address each append LDS Reason This is part of the informational response to the F SPLx STAT X command Action None SPLx PAGEOut nnnnnn Bit Map xxxxxxxxxxx Updated Bit Map On Off x is the CADDSPL ID nnnnnn is the PAGEOut value used to control the page out cycle XXXXXXXX is the SPLHDR4 blocks management Interleaved or Sequential m Interleaved means the append LDS will be filled concurrently m Sequential means the append LDS will be filled sequentially On Off indicates whether updated bit map is in use On or Off Reason This is part of an informational response to the F SPLx STAT X command Action None CADDSPL CADD530I CADD531 CADD532I SPLX Encrypt XXXX Key Interval nnn SPLx is the CADDSPL ID XXXX is the encryption setting either ICSF or Off nnn is the encryption key interval key setti
28. A Recipient Extension record must exist before Download can occur Action Cancel from the current screen Add a Recipient Extension record through screen VRDMU150 for this recipient of the selected report Chapter 5 DC Messages 221 DC Messages DC900256 DC900257 DCc900258 222 Message Guide PC DOWNLOAD IS NOT ALLOWED FOR THIS REPORT RECIPIENT Reason The Recipient Extension record does not allow downloads by request Action Cancel from the current screen Change the Selected Download option to Y through screen VRDMU150 for this recipient of the selected report CREATE OF OQ PC RECORD FAILED Reason A database error exists The download request could not be created Action Exit CA Dispatch and log on again Then retry the function that caused the error Review the log for any CA IDMS messages that have occurred and take appropriate action based on those messages Refer to the CA IDMS Error Codes Messages volumes for more information Report the problem to Technical Support CREATE OF OQ REQUEST RECORD FAILED Reason A database error exists The download request could not be created Action Exit CA Dispatch and log on again then retry the function that caused the error Review the log for any CA IDMS messages that have occurred and take appropriate action based on those messages Refer to the CA IDMS Error Codes Messages volumes for more information Report the problem to Technical Support DC9
29. ARE NO FICHE RECIPIENTS PLEASE ADD OR CANCEL Reason You pressed PF8 on the Report Recipient Definition Screen VRDMU160 to call up the next offline fiche recipient but there are no recipients of offline fiche Action DC900047 DC900048 DC900049 DC900050 DC Messages If you are defining a recipient add by entering the ADD command or enter the Cancel command PLEASE ENTER DELETE COMMAND Reason To delete information from the CA Dispatch database you must use the DELETE command Action Enter the Delete command THERE IS NO STATUS INFORMATION ENTER CANCEL COMMAND Reason You attempted to display status report information and there are no status reports on the database Action Enter the Cancel command THERE ARE NO STATUS RECORDS FOR THIS REPORT Reason You inquired about the status of a particular report but no status records exist on the CA Dispatch database Action No action required NO MORE JOB STATUS RECORDS FOR THIS REPORT Reason You inquired into the status of a report and requested information on the next job through PF5 or PF6 of the status screen VRDMI410 but there are no more job status records Chapter 5 DC Messages 183 DC Messages DC900051 DC900052 DC900053 DC900054 184 Message Guide Action No action required THERE IS NO STATUS INFO FOR THIS RECIPIENT ENTER CANCEL COMMAND Reason You inquired into the Recipient Status Screen VRDMI4
30. Action None CCI Transfer Router for xxxxxxxx has Abended Reason The CA Dispatch CAICCI Transfer Router task CADSXCRT has abnormally terminated for the specified CA Dispatch VTAM applid Action If this occurs during shutdown processing it is a normal situation If not a shutdown restart the transfer router with the CADSXCRS task If the problem persists save all error information and contact Technical Support Chapter 5 DC Messages 275 DC Messages DC900534 DC900535 DC900536 276 Message Guide CCI Inquiry Error XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Reason The CA Dispatch CAICCI Transfer Router received an error on a CAICCI Inquiry request Action This message contains the CAICCI error message text indicating the error encountered Restart the transfer router with the CADSXCRS task If the problem persists save all error information and contact Technical Support CCI Init Error XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Reason The CA Dispatch CAICCI Transfer Router received an error on a CAICCI Init request Action This message contains the CAICCI error message text indicating the error encountered Restart the transfer router with the CADSXCRS task If the problem persists save all error information and contact Technical Support CCI Receive Error XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Reason The CA Dispatch CAICCI Transfer Router received an error on a CAICCI Receive request Action This m
31. Action Select Option 9 to update Sysgen information INCOMPLETE SYSGEN INFO SELECT OPTION 0 AND OR 1 Reason Chapter 5 DC Messages 179 DC Messages DC900031 DC900032 DC900033 DC900034 180 Message Guide User Sysgen information defined to the database is incomplete Action Select Option 0 Option 1 or both to update Sysgen information RECIPIENT STILL HAS REPORTS ASSIGNED TO HIM Reason You attempted to delete a recipient record from the database through the Recipient Definition Screen VRDMU310 but reports are still defined to the recipient Action You must first delete all those reports assigned to the recipient through the appropriate Report Recipient Definition Screens VRDMU130 To display a list of the reports assigned to the recipient press PF5 while viewing the Recipient Definition Screen VRDMU310 THERE ARE NO REPORTS FOR THIS RECIPIENT Reason You pressed PF5 while viewing the Recipient Definition Screen VRDMU310 to display a list of the reports assigned to the recipient but there are no reports assigned to him her Action No action required PLEASE ENTER NUMERICS IN THE FIELD WHERE THE CURSOR IS OR CANCEL Reason You entered numbers incorrectly Action Correct the numbers in the field where the cursor is located FIRST PAGE DC900035 DC900036 DC900041 DC900042 DC Messages Reason You are on the first page of a scroll screen Action
32. Bundle Status Task ended successfully Action None Please Enter a Program Name Reason The REFRESH task code was entered without specifying a program name Action Enter the program name to be refreshed DC900444 DC900445 DC900446 DC900447 DC900448 DC Messages Program Refresh Not Performed Reason The entered program could not be refreshed Action Re attempt the refresh command If the problem persists check the error logs for additional information Program pppppppp Refreshed by User uuuuuuuu Reason The displayed program was refreshed by the indicated user Action None Please Enter Input Parameters Reason A SNAP or TRACE task code was entered without specifying any parameters Action Enter the SNAP or TRACE parameters ccccc Command Not Performed Reason A SNAP or TRACE command could not be processed Action Re attempt the command Invalid Parameters for ccccc Command Chapter 5 DC Messages 257 DC Messages DC900449 DC900450 258 Message Guide Reason Invalid parameter values were entered for a SNAP or TRACE command Action Reenter the command with the correct parameters ccccc for nnnnnnnn Component Turned xx by User uuuuuuuuu Reason A SNAP or TRACE processing for component nnnnnnnn is either turned ON or OFF by the displayed user Action None represents one of the following messages Bundle Release Invoked by Us
33. CA Dispatch Active Bundle process was unable to delete a report from a Logical Bundle because of an error condition Action View the CA Dispatch log files for any supporting error messages If there are no other error messages or the actions for those error messages do not resolve the problem save all error information and contact Technical Support CAN ONLY PRINT OR DELETE REPORTS ARCHIVED WITH RESOURCES Reason You attempted to send a report that was archived with resources back through distribution through screen VARMI200 or VARMI220 Action None DC Messages DC900299 OV PROFILE FOUND Reason This message is informational only Action None DC900300 NO PC CONTROL RECORD EXISTS ADD CONTROL INFORMATION Reason The PC Control record cannot be created without proper information Action Enter a PC file PC directory path and retention information then press Enter DC900301 PC GROUP DOES NOT EXIST Reason The group name you entered on the ADD line was not previously defined Action Add the PC group or reenter the value with a defined PC group name Chapter 5 DC Messages 231 DC Messages DC900302 DC900303 DC900304 DC900305 232 Message Guide LOWER LEVEL PC USERS GROUPS MUST BE DELETED FIRST Reason The PC group being deleted still has PC user group entities defined to it Action Delete all of the lower level PC user group entities DELETIONS FROM GROUP COMPLETE Reason Th
34. CADDSPL encounters an unrecoverable error while processing a JES data set The token identifies the report which is also displayed on the VOPMI205 screen RIDF in RCVY mode Message CADD330I which precedes this message or messages CADD360I CADD361I and CADD362 which follow this message provide more information about the JES data set Action CADD366W messages indicate reports that cannot be processed by CADDSPL and CA Dispatch Review these reports to determine appropriate actions for report recreation or recovery When finished delete the related JES data sets and RIDF entries to remove any incomplete report data stored in the LDS SAPx taskid Stop Immed required to interrupt report x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason A Stop Quiesce or Close command has been requested without the Immed option when a SAPI task is in standby for a given JES data set Messages CADD360I CADD3611 and CADD362I which follow the current message or the previous CADD330I message give more information about the JES data set When a SAPI task is in stand by the Immed option is required to stop it Action If you wish to stop this SAPI task resend the command with the Immed option CADDSPL CADD368I CADD369W CADD394E SAPx taskid Process interrupted for report x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason A Stop Quiesce or Close com
35. CAGLO30E CAGLO31E CAG Messages INVALID TYPE E RECORD DOES NOT FOLLOW CORRESPONDING TYPE D RECORD Reason Occurs when a Type E record SYSGEN message definition part 2 is encountered that does not immediately follow its corresponding Type D record part 1 Action Enter the co requisite records together INVALID RD RCPRPT BY SEQ NUMBER ALREADY EXISTS ADD REJECTED Reason Occurs when a sequence number is not the next number in sequence for a duplicated recipient in a report job definition Example Two recipients exist and an attempt is made to add number 4 Number 3 must be added next Action Correct the invalid field report job recipient or sequence number ARCH RPT DEF TO BE ADDED ALREADY EXISTS Reason Occurs when adding record Type J This ARCH REPORT DEFINITION record already exists on the database Duplicates are not allowed Action Check the fields and enter the correct values Chapter 4 CAG Messages 165 CAG Messages CAGLO32E CAGLO33E CAGLO34E CAGLO35E 166 Message Guide ARCH RPT DEF CANNOT BE DELETED REPORT ENTRIES EXIST Reason Occurs when deleting record Type J This ARCH REPORT DEFINITION record cannot be deleted because individual archive report entries for the base definition still exist on the database Action Check the fields and enter the correct values BASE RECIP REC FOR THIS DJDE FREE FORM REC DOES NOT EXIST Reason Occurs when adding record Typ
36. DC171017 DC200005 This section contains the following topics DC Messages see page 169 This chapter lists all DC messages V1 APPLICATION ABORTED Reason MAPOUT ERROR ON USER MAP MREQ RC 14 was issued because a disconnect S005 condition occurred when it was doing the MAPOUT for VARMI100 Action None FAILED TO OPEN JOURNAL FILE Reason Startup failed with a DC200005 message Action Check the JCL for the correct journal file names and for the backup journal name This might also occur if the system failed while a journal dump DSEXJNL1 was running Note If a journal is dumping when a system failure occurs you may receive the DC200005 message followed by an ABEND Try to restart CA Dispatch and if a WARMSTART SUCCESSFUL message is issued you can shut down the system with a STOPCADS command and run DSEXJFIX If the system hangs after the WARMSTART SUCCESSFUL message you can cancel CA Dispatch and then run DSEXJFIX and DSEXPFIX Chapter 5 DC Messages 169 DC Messages DC200006 DC203006 DC271001 170 Message Guide XXXXXX already in use varied offline Reason Message DC200006 is issued at CA Dispatch startup time Action CA Dispatch database files are currently locked probably with a 0966 return code See the 0966 recovery procedures outlined in this guide Unable to find begin or commit checkpoint for all active run units Reason When starting CA Dispatch the WARMSTART task fa
37. DC980035 DC Messages EXTERNAL EXTRACT CANNOT OPEN SYSCTL Reason The job that runs External Extract has begun execution and failed to open the SYSCTL data set This data set is required for it to execute properly Action Examine the JCL for External Extract and correct the specification for the SYSCTL and CAICTL DD statements EXTERNAL EXTRACT FOREGROUND HAS ABENDED Reason The background portion of extract has abended while running in external mode Action Retain the OS dump produced for this abend and the CV log for this portion of time Contact Technical Support UNABLE TO reason FOR EXTR reportname jobname Where reason is one of the following ALLOC JES FILE ALLOC DASD DSN CLOSE DASD DSN ALLOC OPTL DSN CLOSE OPTL DSN Reason While processing report reportname jobname extraction was unable to allocate or close a data set Action See prior DC970033 and DC970099 messages for the dynamic allocation error codes and resource name and fix the problem If the problem persists save all information and contact Technical Support Chapter 5 DC Messages 359 DC Messages DC980036 DC980041 DC980042 360 Message Guide UNABLE TO Alloc Tape For EXTR xxxxxx Will Try Again Where xxxxxx is the VOLSER of the tape the extract task is trying to obtain Reason Another job has exclusive control of the tape This message often occurs when an extract request is made for a report on the tape currently
38. ID ddname is the ddname of the DD card being opened sss is the hexadecimal value of the system abend uuu is the hexadecimal value of the user abend Reason An error distinct from those of the CADD512E messages occurred during the open of the DD card The system or user abend precisely indicates the kind of the error Action Correct the error and rerun the job CADDSPL CADD520I CADD521I SPLx Index value nnnnnnnn Prnt limit 00000000 x is the CADDSPL ID nnnnnnnn is the Index value in decimal format used to create indexed access in the Sort Data Space oooooocoo is the number of days in decimal format a report can stay for printing in the data spaces before it gets deleted Reason This is part of the informational response to the F SPLx STAT X command Action None SPLx DIV Interval nnnnnnnn Max Update oo000000 xX is the CADDSPL ID nnnnnnnn is the maximum interval in hundredths of a second between two consecutive DIV SAVEs of the data spaces oooooooo is the maximum number of updated pages allowed between two consecutive DIV SAVEs of the data spaces Reason This is part of the informational response to the F SPLx STAT X command Action None Chapter 1 CADDSPL Messages 85 CADDSPL CADD5221 CADD5231 SPLx PreFetch count nnn Checking zzz x is the CADDSPL ID nnn is the allowed pre fetch value in numeric format used when loading a data space page zzz specifies whether page checking must
39. ID UTIL or CADDSPL address space ID SPLx Reason The value specified at offset nnnn is too long to match the target field Action Check the command XXXX Error at offset nnnn Invalid character field xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason The value specified at offset nnnn contains invalid characters Action Check the command CADD717S CADD718S CADD719S CADDSPL XXXX Logic error at offset nnnn Max length missing Xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason An internal error occurred during the analysis of a specific parameter Action Contact Technical Support XXXX Logic error at offset nnnn Invalid value addr hhhhhhhh xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason An internal error occurred during the analysis of a specific parameter Action Contact Technical Support XXXX Logic error at offset nnnn Invalid value length hhhhhhhh Xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason An internal error occurred during the analysis of a specific parameter Action Contact Technical Support Chapter 1 CADDSPL Messages 121 CADDSPL CADD720E CADD721W CADD7222 122 Message Guide XXXX Error at offset nnnn Invalid numeric field xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason The value specified at offset nnnn is either not numer
40. Issued by program CADSIBOO Action Determine if the abend code is listed in the Messages Guide If so attempt to correct the problem and restart the RPI Subtasks If the problem persists contact Technical Support Reason Specifies the report name job name and JES number of the report being processed at the time of the abend Precedes message DC980201 Issued by program CADSIBOO Action None DC980204 DC980205 DC980211 DC980212 DC Messages PC Request Table Exceeded Reason Internal PC request table has exceeded its limits Issued by program CADSIBO3 This is an internal logic error Action Contact Technical Support RPI PC Request STAE Invoked see CAILOG for Abend Reason A program exception occurred in program CADSIBO3 Action Save the abend information from CAILOG and contact Technical Support RPI Data Base Error Module mmmmmmmm Reason An error occurred in the specified database program This message is followed by messages DC980212 through DC980214 Action Contact Technical Support Error Status Xxxx Reason This is an IDMS Error Status value from a database error Action None Chapter 5 DC Messages 375 DC Messages DC980213 DC980214 DCc980215 376 Message Guide Error Record XXXXXXXXXXXXXXXX Reason This is an IDMS database record from a database error Action None Error Set XXXXXXXXXXXXXXXX Reason This is an IDMS d
41. JOB RECIPIENT and PAGES LOGICAL BUNDLE SORTED Reason The SORT command entered on screen VRDMI840 successfully completed Action None DC900395 DC900400 DC900404 DC Messages MOVE OF REPORT IS PENDING Reason You entered the DOWN or UP command and have marked a report for moving but have not yet specified where to move it Action None ATTENTION KEY CANNOT BE USED TO EXIT FROM THE ISPF INTERFACE Reason The ATTENTION or PA1 Key has been pressed while in the ISPF interface Action ATTENTION and PA1 Keys are not valid methods to use to terminate the ISPF interface In emergency situations terminate ISPF from another session by issuing DMCT V PTE pterm ID OFF The pterm ID for the user in the ISPF interface can be found by issuing DMCT DIS PTE After the pterm ID has been varied offline it should be varied back online so that it can be used again Issue the following DMCT V PTE pterm ID ON Unable to Attach Log Driver or Unable to Attach Recovery Termination Mgr Reason The displayed CA Dispatch subtask was not started due to an MVS ATTACH error Action Attempt to restart the displayed subtask If the problem persists contact Technical Support Chapter 5 DC Messages 247 DC Messages DC900412 DC900413 DC900418 DC900419 248 Message Guide CLASS MUST BE SPECIFIED WHEN USING REPRINT OPTION C Reason You requested a reprint using class dest overrides but
42. LMP Messages and Abends CAI6999E CAS9180E The LMP messages follow CAIRIM SERVICES NOT INSTALLED OR AT INCORRECT GENLEVEL Reason CAIRIM is not installed or you are not at the correct Genlevel of CCS for z OS to support LMP Licensing Management Program You must be at the requisite level indicated in your maintenance or installation cover letter Action Upgrade CCS for z OS to the requested Genlevel Be sure that your LMP key for CA Dispatch is included in the KEYS DD located in the CAS9 procedure and run the CAS9 procedure CPU nnnnnn Requires an LMP key to run Prod AB Reason You are not licensed for CA Dispatch on the CPU on which it is being run Action Obtain a new CA Dispatch key by contacting Customer Support Update the member pointed to in the KEYS DD statement located in the CAS9 procedure with the new key Execute the CAS9 procedure and reinvoke CA Dispatch Chapter 8 LMP Messages and Abends 449 Chapter 9 Abend and VTAM Error Codes System abend codes are formatted as either four digit codes XXXX through 9999 or five digit codes U9999 and are issued whenever a CA component completes execution these codes report the completion status System abend codes always start with S followed by three characters SXXX The four digit abend code number indicates a user not system error All non zero codes indicate that a problem has occurred This section contains the following topics System Aben
43. Messages This chapter lists messages preceded by the characters DCD This section contains the following topics DCD Messages see page 411 DCD Messages DCDOOO1E DCDOOO02E DCDOOO3E The DCD messages follow FIRST DATE INVALID WITHIN STATEMENT nnnnnnnnnnnnnnnn Reason You supplied an invalid date in the first date field of the statement nnnnnnnnnnnnnnnn Action Make sure that the date format is correct and be sure you used the correct delimiters FIRST TIME INVALID WITHIN STATEMENT nnnnnnnn Reason You supplied an invalid time in the first time field of the statement nnnnnnnn Action Make sure the time format is correct and be sure you used the correct delimiters SECOND DATE INVALID WITHIN STATEMENT nnnnnnnn Reason You supplied an invalid date in the second date field of the statement nnnnnnnn Action Make sure the date format is correct and be sure you used the correct delimiters Chapter 6 DCD Messages 411 DCD Messages DCDOO04E DCDOOO5E DCDOOO6E 412 Message Guide SECOND TIME INVALID WITHIN STATEMENT nnnnnnnn Reason You supplied an invalid time in the second time field of the statement nnnnnnnn Action Make sure the time format is correct and be sure you used the correct delimiters FIRST DATE TIME IS AFTER SECOND DATE TIME IN STATEMENT Reason The date time or both that you supplied in the first date and time fields of the statement are later than the
44. Messages DC970123 DC970124 DC970125 DC970126 338 Message Guide Error Opening ACIF Status File for Output Reason An error occurred while attempting to open an ACIF Status file Action Rerun the ACIF request If the problem persists save all error information and contact Technical Support Error Opening ACIF Status File for Input Reason An error occurred while attempting to open an ACIF Status file Action Rerun the ACIF request If the problem persists save all error information and contact Technical Support Error Closing ACIF Status File Reason An error occurred while attempting to close an ACIF Status File Action Rerun the ACIF request If the problem persists save all error information and contact Technical Support Error Writing to ACIF Status File Reason An error occurred while attempting to write to an ACIF Status File Action Rerun the ACIF request If the problem persists save all error information and contact Technical Support DC970127 DC970128 DC970129 DC970130 DC Messages Error Reading from ACIF Status File Reason An error occurred while attempting to read an ACIF Status File Action Rerun the ACIF request If the problem persists save all error information and contact Technical Support Invalid Function Code Reason CADSAFST was called with an invalid function code Action Contact Technical Support ACIF Status File Doe
45. Messages 189 DC Messages DC900100 DC900101 DCc900102 DC900103 190 Message Guide I O ERROR ON SCRATCH FILE FOR NAME nnnnnnnn WITH RETURN CODE nn Reason CA IDMS temporary file can not be accessed Action Exit from OLV process and retry If problem persists increase the size of the scratch file area STORAGE NOT AVAILABLE FOR NAME nnnnnnnn WITH RETURN CODE nn Reason No CA IDMS storage area is available Action The IDMS storage pool will have to be increased Exit from the OLV process then retry If the problem persists increase the size of the scratch file area INVALID COMMAND nnnnnnnn WAS ENTERED Reason An invalid command was entered Action Reenter a valid command INVALID SYNTAX FOR COMMAND FIELD FOR MODULE nnnnnnnn ERROR WAS nnnnnnnn Reason Invalid additional parameters were entered for a valid command Action Reenter or correct the command with a valid 1st or 2nd parameter DC900104 DC900105 DC900106 DC900107 DC Messages FIRST AVAILABLE PAGE IS BEING DISPLAYED Reason PF7 page up was pressed when page 1 was being displayed Action No action required LAST AVAILABLE PAGE IS BEING DISPLAYED Reason PF8 page up was pressed when the last page was being displayed Action No action required CURSOR NOT POSITIONED PROPERLY FOR FR COMMAND FREEZE BAD nnnnnnnn Reason Cursor must be on a valid line after line 2 and a valid line
46. No action required LAST PAGE Reason You are on the last page of a scroll screen Action No action required ONLY PAGE Reason You are on the only page of a scroll screen Action No action required THERE ARE NO REPORTS QUEUED Reason When inquiring into the status of a bundle CA Dispatch showed that no reports were queued to that bundle Action No action required NO REPORTS FOR THIS REQUEST IN BUNDLE QUEUE Reason The particular report about which you are inquiring using the Active Recipients Report Status Screen VRDMI830 has not yet been queued to this bundle Chapter 5 DC Messages 181 DC Messages DC900043 DC900044 DC900045 DC900046 182 Message Guide Action No action required NO REPORTS IN BUNDLE YET Reason There are no reports queued to the bundle that you are inquiring about Action No action required THERE ARE NO ACTIVE BUNDLES Reason You requested to see a list of the active bundles using the Active Bundles Status Screen VRDMU820 but there are no active bundles Action No action required INFORMATION MUST BE ADDED BEFORE THIS FUNCTION KEY CAN BE USED Reason You pressed a function key in order to move to the next level deeper into the screens but before you can do this you must add the information that you entered on this screen to the database Action Enter the ADD command to add and try the function key again THERE
47. This message indicates a current processed job has abended Action None Invalid DISP144 Record Reason This is an internal error The RDSTPRNT program received an internal DISP144 record from RDFGSTAT that has not been created from either a JOBTERM event for a CA Dispatch Bundle report or a DISP144 event from a PC Download Action Save all information and contact Technical Support Module RDSTPRNT Download Request with Dbkey nnnnnnnn Not Found Reason This is an internal error The DBKey found in the DISP144 event from a PC Download is not found in the IDMS DB Action Make sure the IDMS DB has not been cleared If not save all information and contact Technical Support Status Record for Bundle bbbbbbbb Date mm dd yyyy Time hh mm ss Not Found Reason This is an internal error The Bundle specified is not found in the IDMS DB Action Save all information and contact Technical Support DC Messages DC980826 RDSTBNDL Input has no Bin ID or Bundle Id Reason The ENF DISP145 event has neither Bin ID nor Bundle ID At least one these IDs must be specified Action The ENF DISP145 event has created user program s Check it them Chapter 5 DC Messages 407 DC Messages DC980827 408 Message Guide represents one of the following messages RDSTBNDL or Connect RD BUNDLE to IX RD BUNDLE S2 DSTBNDL Connect RD BUNDLE to IX RD BUNDLE S4 or RDSTBNDL or RDSTBNDL
48. UTIL or CADDSPL address space ID SPLx Reason One of the Util values is outside of its limit Action Check the command XXXX Message All None must be the only value Xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason The All or None value cannot be specified with another value Action Check the command Missing SPLHDR2 token during Getblock request Reason An internal error occurred during the request for a new 4 KB block Action Contact Technical Support Invalid SPLHDR2 token during Getblock request hhhhhhhh Reason An internal error occurred during the request for a new 4 KB block Action Contact Technical Support CADD802E CADD803E CADD805S CADD806W CADDSPL Conversion error for SPLHDR2 token during Getblock request hhhhhhhh Reason An internal error occurred during the request for a new 4 KB block Action Contact Technical Support Invalid number of blocks requested nnnnnnnn Reason An internal error occurred during the request for a new 4 KB block Action Contact Technical Support Conversion error for 4k_block Block hhhhhhhh for file token tttttttt in requ Request Reason An internal error occurred during the request for a new 4 KB block Action Contact Technical Support Conversion error for 4k_block Block hhhhhhhh for file token tttttttt in requ Request during rewrite Reason An internal error occurr
49. a CADDO52E or CADDO54I message Action None This message is informational only SPLx Cannot append LDS MAXCAD nnn in Parmlib member IEASYSxx SPLx is the CADDSPL ID nnn is the MAXCAD value as specified in the active IEASYSxx member Reason The MAXCAD value is too low to support the number of data spaces for this CADDSPL The MAXCAD value indicates the maximum number of SCOPE COMMON data spaces for the entire system This message follows message CADD102E that displays the name of the LDS dataset that was being processed when the error condition was found The CADDSPL address space terminates Action Increase the MAXCAD value Note The system must be IPLed for the updated MAXCAD parameter to take effect SPLx Return Code xxxxxxxx Reason Code yyyyyyyy SPLx is the CADDSPL ID XXXXXXXX is the function return code yyyyyyyy is the function hexadecimal reason code Reason This message received during the CADDSPL initialization process displays the return code and reason code associated with data space functions refer to the preceding message for the function in error Action CADDO60I CADDO61E CADDO62E CADDSPL See the z OS MVS Authorized Assembler Services Reference manual for the meaning of the return code and reason code associated with the function named in the preceding message and take appropriate action If the problem persists contact Technical Support SPLn Return Code XXXXXXXX Reason Code yyyy
50. being accessed by the Archive task Note This error can also occur when there are no drives available to mount a tape Action Determine which job controls the Volser in question and if possible eliminate the contention The Extract task will retry the allocation request for the Volser See the Active Archive Volser Management section in the User Guide for the Report Administrator for more information ARBGDB 0069 STATUS CV NOT PRESENT TASK ABENDING Reason The Archive task is active but it cannot establish communication with the database Action Restart the Archive task S ARCH ARBGEXDB 0069 STATUS CV NOT PRESENT TASK ABENDING Reason The Archive task is active in external mode but it cannot establish communication with the database Action Restart the Archive task S ARCH XT DC980061 DC980062 DC980071 DC980072 DC Messages DYNAMIC OUTPUT ALLOCATION FAILED Reason An invalid return code was encountered in the VCFGALOC module Action Restart the abended ARCH task If the problem persists contact Technical Support DYNAMIC DEALLOCATION FAILED Reason An invalid return code was encountered in the VCFGALOC module Action Restart the abended ARCH task If the problem persists contact Technical Support ARCHIVE Data Base Error Module ARBGDB Reason An error occurred in the specified database program This message is followed by messages DC980072 through DC980074
51. data set Action This message is preceded by additional error messages Save all error information and contact Technical Support RPO Agent Recipient Separator Error RC cc Reason An error occurred while attempting to write a Recipient Separator Page to the bundle data set Action This message is preceded by additional error messages Save all error information and contact Technical Support RPO Agent JES Write Error Program pppppppp RC cc Reason An error occurred attempting write report data to the bundle data set Action This message is preceded by additional error messages Save all error information and contact Technical Support Chapter 5 DC Messages 387 DC Messages DC980428 DC980429 DC980431 DC980432 388 Message Guide RPO Agent LDS ttttt Error RC cc Reason An error occurred attempting to perform the indicated function to CADDSPL Action This message is preceded by additional error messages Save all error information and contact Technical Support Reason The indicated report job cannot be found by CADDSPL Action Contact Technical Support RPO Agent Maildrop End Separator Error RC cc Reason An error occurred while attempting to write the Maildrop End Separator Page to the bundle data set Action This message is preceded by additional error messages Save all error information and contact Technical Support RPO Agent Bundle Deallocate Error
52. did not specify any such overrides Action Enter a class and destination override combination MAILDROP MUST BE SPECIFIED WHEN REPRINTING Reason You did not specify a maildrop Action Enter a maildrop name RIDF Background STAE Routine Invoked Reason A program exception occurred in program CADSRBOO and its STAE recovery routine was invoked Action Try the desired RIDF function again If the problem persists contact Technical Support Queue Class Dest Cannot Be All Blank Reason All RIDF selection criteria are blank Action At least one of the criteria must be specified DC900420 DC900421 DC900422 DC Messages RIDF Foreground Task Prematurely Ended Reason Program CADSRFOO has ended prematurely due to an error condition Action Re attempt the desired RIDF function If the error reoccurs it will be preceded by another error message Save all error information and contact Technical Support There Are No Reports in Current Queue Reason No reports were found by CADDSPL for the input queue type displayed on screen VOPMI200 Action None Cannot Perform Option for this Report Reason An invalid option was entered next to an RIDF report Action None Chapter 5 DC Messages 249 DC Messages DC900423 250 Message Guide represents one of the following messages Error Reading Report from LDS RC rc Reason An error has occurred while trying t
53. encountered that contained ANSI carriage control characters and had a lines per page value of zero specified on the Report Base Definition Screen VRDMU110 Action The report is bundled without carriage control conversion If this is not what you want change the Lines Per Page field on the Report Base Definition Screen VRDMU110 to a non zero value CADSIFO6 Recovering From Database Deadlock Reason RPI program CADSIFO6 has successfully recovered from a database deadlock condition This message will be preceded by an IDMS deadlock message Note This is an informational message It may occur more frequently in CA Dispatch when running more than one RPI task It indicates that CA Dispatch has recovered from a database deadlock and is continuing to process the report Action None Chapter 5 DC Messages 379 DC Messages DC980228 DC980229 DC980231 380 Message Guide Reason A report was marked for Online Viewing but due to an error it could not be added to Online Viewing and is marked to be archived Action This message should be preceded by a message for the error that caused the problem Online Viewing Pages Table Not Found Reason A report was marked for Online Viewing but the Online Viewing Pages Table from which OLV database records are created is missing This is an internal logic error Action Contact Technical Support Scheduling Command Error Type t Module mmmmmmmm RC ccc Reason
54. entries required to perform a copy are complete The ADD command must be used to add the new recipient to the database Action Enter ADD in the command line or press PF 10 to complete the recipient copy ENTER THE NEW REPORT RECIPIENT TO ADD Reason On the Report Recipient Copy Screen Reports VRDMU135 during the recipient copy function the To recipient being created was not entered Action Enter the desired To report recipient Chapter 5 DC Messages 227 DC Messages DC900275 DC900276 DC900277 DC900278 228 Message Guide RELATIVE RECIPIENT NUMBER EXCEEDS ACTUAL DUPLICATES Reason On the Report Recipient Copy Screen Reports VRDMU135 for the From report recipient a relative duplicate number has been entered This relative number is greater than the actual number of duplicate recipients Action Correct the relative duplicate number for the From recipient LINE COPY MOVE BLOCK COMMAND PENDING ENTER RESET TO CANCEL Reason On the Report Recipient Definition Screen Pages VRDMU140 a MOVE COPY or BLOCK command has been partially issued but is not complete Action The command may be completed by entering the proper line command RESET may be entered to cancel the command BUNDLE NOT FOUND Reason On the Active Bundle Status Screen VRDMU820 a Locate Bundle command LBxxxxxxxx did not find a matching bundle Action Enter a valid bundle ID for the LBxxxxxxxx comman
55. error message s from the dynamic allocation routine that precede this message take appropriate action based on those messages m The bundle recovery program will restore from CADDSPL upon startup Start the RPI subtasks after CA Dispatch startup to rebuild the original bundles with new bundle IDs If the problem persists contact Technical Support Chapter 5 DC Messages 327 DC Messages DC970072 DC970073 328 Message Guide Bundle Data File Close Error Reason The Bundle Recovery program could not close the bundle data file Action m Review any error message s from the dynamic allocation routine that may precede this message take appropriate action based on those messages m The bundle recovery program will restore from CADDSPL upon startup Start the RPI subtasks after CA Dispatch startup to rebuild the original bundles with new bundle IDs If the problem persists contact Technical Support Error Reading Report from CADDSPLx RC cc CADDSPLx is the STCname of the initialization address space Reason The Bundle Recovery program encountered an error attempting to read a report from CADDSPL while restoring bundled reports from it Action m Review the error messages that precede this message m If CADDSPL is not active start it and enter the BSTORE task at the CA Dispatch Enter Next Task Code prompt to retry the bundle recovery If the problem persists contact Technical Support DC970074 DC
56. has a different backward chain m dx to Dta When accessing a data block from an index block a data block has been found that is either owned by another report or refers to another index block m Dta to Dta When walking down the data chain a data block has been found that is either owned by an other report or has a different backward chain Action All of these reasons are related to a broken chain If these messages appear frequently contact Technical Support CADD300E CADD301 E CADD302E CADDSPL Procedure name must be CADZSAPx procname invalid xX is the SAPI STC name suffix required procname is the current STC name Reason The name of the SAPI procedure requires a special format You specified an invalid procname The SAPI function stops immediately Action Change the procname as specified by the message SAPX is not APF authorized X is the SAPI suffix Reason The SAPI address space must be APF authorized This can be due to an unauthorized library in the STEPLIB concatenation The SAPI function stops immediately Action Define all of the libraries in the STEPLIB concatenation as APF authorized SAPX unsupported release level of mvs x is the SAPI suffix Reason The SAPI address space is not supported on a system version older than z OS V1R3 The SAPI function stops immediately Action Contact Technical Support Chapter 1 CADDSPL Messages 53 CADDSPL CADD3031 CADD308I
57. initialization module Action Set up PARM value with a valid module name and restart CAIRIM program XXXXXXXX Unsupported release level of YYY XXXXXXXX is DSINIT or CADDSPLI YYY Is MVS or JES Reason A valid JES2 or MVS environment could not be determined during either the DSINIT initialization routine or the CADDSPL startup process Also see accompanying message CADSO14l Action Review the Z OS UPGRADE FOR CA Dispatch UPGRAD solution that pertains to your operating system environment and verify that you have all of the appropriate compatibility code installed and in place Verify that when CAIRIM CAS9 is was executed that it had access to and loaded the appropriate operating system compatible code Verify that the library CADDSPLx is executing from has had the appropriate updates DSINIT System system is currently active Reason A request to refresh the SNT cannot be satisfied because system system is still active Action Stop system system and restart CAIRIM program CADSO14I CADSO15I CADSO16E CADS Messages DSINIT JESLIT value is value Reason Accompanying error message CADSO12E this message displays the JES2 level currently active on your system Action None DSINIT Module module at address literal loaded deleted Reason Module module was successfully loaded or deleted Action None DSINIT Cannot locate module module in LPA Reason Module module was requested to be
58. invalid function request has been passed to the CA Dispatch agent running in CA DRAS Action Check for other accompanying error messages in the CA DRAS logs Log off then log in and try the request again If the error persists contact Technical Support Agent LDS mmmmm Error RC cc Reason The CA Dispatch agent running within CA DRAS has encountered an error accessing the CADDSPL interface to read a report Action Check the CA DRAS logs the CA Dispatch logs and the CADDSPL logs for other indications of the error Make sure that the LDS is not full and that it is functioning properly Reached end of page table Reason An illogical condition has occurred while reading pages from the CADDSPL LDS Action Try browsing the same report when signing directly on to CA Dispatch Contact Technical Support Chapter 2 CADS Messages 153 CADS Messages CADSO305E CADS9999E 154 Message Guide Zero page table entry found Reason An illogical condition has occurred while reading pages from the CADDSPL LDS Action Try browsing the same report when signing directly on to CA Dispatch Contact Technical Support UNEXPECTED EVENT IN digname RC xxxx FN function Reason An error occurred when accessing a record in the CA Dispatch Database Action Follow the same actions that would be taken upon encountering a database error from CA Dispatch directly Check status of databases or possible errors in the CA
59. it ARCHx ILLOGICAL CONDITION MISSING RPT JOB invalid SPLHDR2 ARCHx is the specific Archive task Reason Both the report and jobname are missing in the SPLHDR2 record The associated DC980095 message should indicate available job information This is an illogical condition The archive request will be placed on hold and the Archive task will be shut down Action Review the Archive queue Determine if there is a problem during CADDSPL intercept or SAPI processing Restart the archive task If the problem persists contact Technical Support xxxx Report requeued Reason A report is being requeued for reasons indicated by previous messages Action Archive processing requeues the report for additional analysis Chapter 5 DC Messages 363 DC Messages DC980079 DC980080 DC980081 364 Message Guide xxxx Report requeued after Archive ABEND Reason A report is being requeued after an ABEND in archive processing while processing the report Action Archive processing requeues the report for additional analysis Unable To Allocate Tape for Archive Will Try Again Reason An error occurred attempting to allocate a tape device or open a file on a tape Action Determine if there is a problem with the tape or tape drive Archive will attempt to allocate the tape in four minutes If the problem persists contact Technical Support Invalid Dataset Name For Archive Report Bypassed Reason
60. locked bitmap block Action If this message appears frequently it may indicate an abnormal termination of the CADDSPL address space Contact Technical Support CADDO66E CADDO68W CADDO67I CADDSPL SPLx LDSDD is not a valid CADDSPL Root LDS SPLx is the CADDSPL ID Reason The data set referenced by the LDSDD DD statement is not a valid CADDSPL Root LDS and was not correctly initialized by the CADDUTIL batch utility Action Do one of the following m Create and initialize the CADDSPL Root LDS see the Installation Guide for more information m Correct your CADZSPLx procedure SPLx waiting for close of report Reason The CADDSPL task will not end until all intercepted reports or all reports being processed by the SAPI task have completed This message may occur if there is an active report when the F SPLX CLOSE command is issued without the IMMED option Action None SPLx Blocks Total nnnnnn Used 000000 Pct ppp SPLx is the CADDSPL ID nnnnnn is the number of blocks in a given LDS 000000 is the number of blocks already used in a given LDS ppp is the percent used for this LDS Reason This is an informational message associated with the CADD081I message Both messages are seen for each active LDS in response to a STAT X command This message indicates the used part of a given LDS Action None Chapter 1 CADDSPL Messages 25 CADDSPL CADDO69S CADDO70E CADDO71E 26 Message Guide SP
61. lt SPLx gt Summary of ROOT LDS information for ddname SPLx is the CADDSPL ID ddname is the ROOT LDS ddname Reason This message is part of the initialization update of the ROOT LDS This is the header message for a group of messages that give the ROOT LDS parameters Action None CADDSPL CADD671I CADD672I lt SPLx gt Total Blocks nnnnnnnn 1st HDR4 xxxxxxxx 1st HDR2 xxxxxxxx SPLx is the CADDSPL ID Reason This message is part of the initialization update of the ROOT LDS Total Blocks is the number of 4 KB blocks useable in the ROOT LDS 1st HDR4 gives the token of the first 4 KB SPLHDR4 Block These blocks contain the full bit map to address all of the future Append LDS 1st HDR2 gives the token of the first 4 KB SPLHDR2 Block These blocks contain the characteristics of the reports that are saved in the Append LDS Each 4 KB SPLHDR2 block contains the characteristics for 16 reports Action None lt SPLx gt DIV Interval nnnnnnnn Max Update nnnnnnnn Checking xxx SPLx is the CADDSPL ID Reason This message is part of the initialization update of the ROOT LDS Interval is the maximum wait time between two consecutive DIV Save operations and expressed in hundredths of a second Max Update is the maximum number of page updates between two consecutive DIV Save operations Checking is set to Yes or No The use of checking causes more CPU consumption CA recommends that you set Checking to No
62. mm dd hh mm UserID Report Job yy mm dd hh mm Reason An automated download transfer request was processed but was not downloaded because the STATUS task has not processed the previous download request that has the same User ID and PC file path name The first date time stamp contains the date and time the request was processed The second date time stamp contains the date and time the report was originally created Action This is a warning message The next auto transfer cycle will again check this download request to see if it is available for transfer Be sure ENF and the Status task are active If the download request continues to be bypassed the previous download request for the same user ID and PC file path name can be manually marked complete using the Request Queue List Screen VPCMU310 Option C PROGRAM pppppppp STAE ROUTINE INVOKED Reason STAE processing for program pppppppp has been entered due to an abend condition which prevents further processing Action Investigate the abend that occurred and take appropriate action PROGRAM CADSUBO01 CADSUFG1 ATTACH ERROR Reason An attempt was made to retrieve a report from Archive while in the Online Viewing Only region and program DSLCCHEK cannot determine if the main region is active The report will not be retrieved Action Back out of the current screen reenter the screen and retry the request If the error persists contact Technical Support Chapter 5 D
63. must be less than or equal to 59 Action Correct the input parameter and resubmit the job 442 Message Guide DCD0152E DCDO153E DCD Messages LDS Function XXXXX Unsuccessful Where XXXX can be OPEN READ GETRP or LDEL Reason An attempt to execute the LDS function failed during CADSVIEW processing Action For XXXXX OPEN GETRP or LDEL CADSVIEW skips the affected report and continues by processing next reports For XXXXX READ CADSVIEW stops processing Note In both cases contact Technical Support LDSRPT RPT Name Does Not Match Reason The utility has detected out of sync condition where the OV file index pointer does not match the corresponding LDS file data index record Action OV LDS file synchronization issues can be resolved by executing the DSEXLSY L or DSEXOSY L synchronization utilities which are documented in the Utilities chapter of the Systems Programmer Guide Contact CA Technical Support if you need assistance Chapter 6 DCD Messages 443 DCD Messages DCD0154E No valid control statement was found in CADSOPTN control member Reason The CADSOPTN control member was either empty or did not contain a valid control statement for the utility Action See the Utilities chapter in the CA Dispatch Systems Programmer Guide for the valid syntax of control statements 444 Message Guide Chapter 7 IDMS Messages This chapter lists CA IDMS messages and abend codes Th
64. name to be used during distribution JIIIIIII Jobname to be used during distribution FFFFFFFFFFFF PC File name of the file to be uploaded ccc CCC Recipient requesting the upload PCPCPCPC PC User for who the request is being created An example of a PC upload request 08 18 2004 04 12 33 DC900604 User SUSERO1 Panel VOVMU360 Added Upload Rqst TESTRPT SUSERO1A KEVIN SMITH 930104 1245 SUSERO1 Action None Chapter 5 DC Messages 295 DC Messages DC900605 296 Message Guide User UUUUUUUU Panel PPPPPPPP Updated Bundle DDD DDD Reason A bundle was updated from the online screens UUUUUUUU User name PPPPPPPP Panel name DDD DDD Descriptive text about the bundle being updated An example of a report being deleted from a bundle and causing this message to be produced 08 18 2010 06 25 26 DC900605 User USERNO1 Panel VOPMI810 Updated Bundle A22BUNDL DELETED TESTRPT SUSERO1A K SMITH An example of a bundle resorted by report then job then recipient then pages 08 18 2010 06 25 36 DC900605 User USERNO1 Panel VOPMI810 Updated Bundle A22BUNDL SORT RPT JOB RCP PAGES Action None DC900606 DC900607 DC Messages User UUUUUUUU Panel PPPPPPPP Updated RIDF Queue QQQQQ RRRRRRRR JJJJIJIJ DDD DDD Reason A bundle was updated from the online screens UUUUUUUU User name PPPPPPPP Panel name QQQQQ RIDF Queue ARCH RPI OTHER RRRRRRRR Report name of the entry that was updated J
65. no archive pool VOLSERs were defined to the CA Dispatch database Action Add archive pool VOLSERs to the database or specify OUTVOL SCRATCH DCDOO082E DCDOO083E DCDOO84E DCDOO85E DCD Messages ERASE OF SG ARTAPE RECORD FAILED Reason After obtaining a VOLSER from the archive tape pool the erasure of the record from the database failed Action Save all error information and contact Technical Support Program Work Area Getmain Failure Reason An attempt to obtain storage for the Batch Utility failed Action Increase the region size for the CADSUTIL step Common Area XXXXXXX Getmain Failure Reason An attempt to obtain storage for named common area failed Action Increase the region size for the CADSUTIL step Load of Module XXXXXXXX Failed Reason An attempt to LOAD the named module for the Batch Utility failed Action Make sure that the CADSLOAD being used contains the following members CADSUPAR CADSUDB CADSOVUT CADSUOV and CADSULDS Chapter 6 DCD Messages 431 DCD Messages DCDOO86E DCDO087E DCDOO88E DCDOO89E 432 Message Guide Invalid SYSIN Type Type Missing Reason You supplied an invalid or missing SYSIN command parm Action Check your SYSIN Command Parms to see if you input the correct parameters Also check to see whether you included the proper delimiters Invalid RC from XXXXXXXX RC XXX Reason The Batch Utility received an inval
66. occurred trying to access an Online Viewing database record such as OV VIEW or OV BASE record This error may also be received if a report has been logically deleted from the VOVMI310 screen Action Check the logs of the CA Dispatch task to get more information Check the integrity of the CA Dispatch databases User already logged on Reason The CA Dispatch agent encountered an error during signon of the specified user Action Determine if the user is already signed on to the CA Dispatch panels If the user is already signed on log off and reattempt the signon request Chapter 2 CADS Messages 147 CADS Messages CADS0194E CADS0O195E CADS0O196E CADS0197E 148 Message Guide CA Dispatch CV is not active Reason The CA Dispatch address space is not active or cannot be located Action Make sure that the CA Dispatch region is active Check the setup parameters to make sure they are addressing the correct CA Dispatch region User not defined to CA Dispatch Reason The entered user identifier is in the proper format but is not known to the system Action Make sure that a valid userid has been keyed in Terminal Has Been Disconnected Reason The user has been disconnected from the CA Dispatch region Action Check the CA Dispatch logs or CA Dispatch OLV to determine if the user was disconnected due to a timeout parameter deactivated by the CA Dispatch Administrator or if an error occu
67. of the report Action Reset the cursor to a valid line and press Enter STRING COULD NOT BE FOUND WITHIN PAGES SELECTED Reason The Find command search string was invalid or not found on the pages selected to be searched Action Enter the correct search string or increase the number of pages to be searched Chapter 5 DC Messages 191 DC Messages DC900108 DC900109 DC900110 Dc900111 192 Message Guide INVALID CURSOR POSITION FOR THIS PAGE nnnnnnnn Reason The cursor must be on a print line in the report Action Reset the cursor to a valid line and press Enter DISTRIBUTION LINE NUMBER IS nn AND COLUMN NUMBER IS nnn Reason This is a display of the requested information line and column number The cursor is positioned on an L command Action No action required nnnnnnnn MSGCLASS INFORMATION NEVER PROCESSED Reason The requested MSGCLASS information does not exist Action Enter the next command or PF key PAGE S SELECTED ARE UNAUTHORIZED FOR THIS USER Reason This message is displayed for one of the following reasons m There is a security violation on the requested pages for the user m Page information cannot be found m The page has no report lines Action Enter the next command or press the appropriate PF key DC900112 DC900113 DC900114 DCc900115 DC Messages LRECL GREATER THAN 256 DATA MAY BE TRUNCATED Reason You are viewing a report t
68. refreshed or deleted but cannot be found in LPA Action Either primary initialization has never run since the last IPL or a previous request already deleted module module No action required Chapter 2 CADS Messages 145 CADS Messages CADSO17E CADS0172E CADS0172E 146 Message Guide XXXXXXXX Unable to find JES2 version Reason DSINIT was unable to locate active JES address space Action Check for JES2 or JES3 subsystem running and active if the problem persists contact Technical Support Note Insure that you have not invoked the CAIRIM proc with SUB MSTR prior to activating JES ACCESS TO THIS TABLE IS NOT ALLOWED Reason Security has denied access based on report name job name or recipient name Action Check security definitions for this user SECURITY VIOLATION ACCESS TO THE RECORD IS DENIED Reason Security has denied access based on report name or job name Action Check security definitions for this user CADSO191E CADS0192E CADS0193E CADS Messages RECORD NOT FOUND OLV RECIP Reason There are currently no reports in CA Dispatch Online Viewing for the recipient ID requested Action Check in CA Dispatch OLV and in the User Sysgen definitions to make sure the correct user or recipient IDs has been defined If necessary add a report to OLV for this recipient ERROR VALIDATING DATABASE RECORDS Reason While trying to read a specific report an error has
69. set for the recovery process and detected the last processed JES data set marked for recovery does not correspond to this one The process for the current JES data set is deferred until the interrupted JES data set is successfully recovered Messages CADD360I CADD361I and CADD362I which follow the current message or the previous CADD330 message give more information about the current JES data set Action None SAPx taskid Original token already deallocated x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason Informational The SAPI task received a JES data set for the recovery process and detected the current file in the data space was deallocated The recovery for the current JES data set is done in a new file in the data space Messages CADD360 CADD3611 and CADD362I which follow the current message or the previous CADD330I message give more information about the current JES data set Action If this error persists contact Technical Support 70 Message Guide CADDSPL CADD354W CADD355S SAPx taskid Token found addresses another file than X is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason Informational The SAPI task received a JES data set for the recovery process and detected the related token addresses a file in the data space that defines another JES data set The recovery for the current JES data set is done in a new file in th
70. space Messages CADD3601 CADD361 and CADD362I which follow the current message or the previous CADD330 message give more information about the current JES data set This is an internal error Action Contact Technical Support SAPx taskid Bad file structure type nnn for token yyyyyyyy x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH nnn is a number used for debugging purposes to specify the internal error Valid is between 001 and 007 yyyyyyyy is the hexadecimal token which addresses the file in the data space Reason The SAPI MSG task received a JES data set for the recovery process and detected an internal error in the blocks of the data space s file The recovery for the current JES data set is done in a new file in the data space Messages CADD3601 CADD361I and CADD362I which follow the current message or the previous CADD330I message give more information about the current JES data set Action Contact Technical Support CADD358S CADD359S CADDSPL SAPx taskid Restart RBA does not address separator x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The SAPI MSG task received a JES data set for the recovery process and detected the recovery RBA does not address a JES data set separator in the data space s file The recovery for the current JES data set is done in a new file in the data space Messages CADD360I CADD361I and CADD3621 which
71. the CADDSPL Spool Interface if a problem occurred creating or reading the bundle recovery dataset Action Bundle recovery will check each processed report in the CADDSPL Spool Interface to see if it previously was part of a bundle If the report was part of a bundle bundle recovery will requeue the report to be processed by RPI m Start RPI in order for the bundle to be rebuilt with all of its original reports It is possible that a report or bundle could be created twice if bundle recovery was processing the bundle recovery data set built a bundle encountered a later error and then restored from the CADDSPL Spool Interface The reports successfully restored from the bundle recovery data set will also be written to RPI as part of the second restore operation represents one of the following messages Bundle Structure Restore Successful Reason The Bundle Recovery program has successfully finished restoring the bundle structures Action None Bundle Structure Restore Bypassed Reason The Bundle Recovery program found that there were no bundle structures to restore Action None Chapter 5 DC Messages 321 DC Messages DC970060 DC970062 322 Message Guide Bundle Structure Restore Failed Reason The bundle recovery program encountered an error that caused some or all of the bundle structures to not be restored Action m Review the messages that precede this message they indicate the actual ca
72. the LDS referenced by the DD statement ddname This message specifies the number of extents used by the LDS file Action None CADD625I CADD626I CADD6271 CADD628I CADDSPL UTIL Total EXCPs nnnnnnnn Reason This is the sixth of nine messages giving characteristics about the LDS referenced by the DD statement ddname This message specifies the number of EXCPs for the LDS file Action None UTIL System Timestamp hhhhhhhhhhhhhhhh Reason This is the seventh of nine messages giving characteristics about the LDS referenced by the DD statement ddname This message specifies the timestamp of the LDS Action None DFP Signature hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh Reason This is the eighth of nine messages giving characteristics about the LDS referenced by the DD statement ddname This message specifies the DFP signature for the LDS Action None UTIL Wasted Space hhhhhhhh Reason This is the ninth of nine messages giving characteristics about the LDS referenced by the DD statement ddname This message specifies the wasted space in the LDS The value is represented in hexadecimal format Action None Chapter 1 CADDSPL Messages 99 CADDSPL CADD629W CADD630I 100 Message Guide UTIL No SNT2 entry used Reason In a CADDUTIL step no CADDSPLx address space was found initialized in the CADDSNT table Action Check your environment This is a normal situation when no CADDSPL environ
73. the number of appended LDS indicated in the root LDS The message that follows CADDO6OI indicates the return and reason code of the request Action This is an internal error Contact Technical Support SPLX unable to perform XXXXXXXXXXXXXXXX SPLx is the CADDSPL ID XXXXXXXXXXXXXXXX s the function that failed Reason The function shown in the message could not be completed successfully Message CADDO60E displays the return code and reason code at the time of failure Review the MVS Programming Authorized Assembler Services Reference for a description of the function Action Take appropriate action based on the information found in the IBM manual If the problem persists contact Technical Support SPLx Bad Return Code from ALESERV SPLx is the CADDSPL ID Reason The ALESERV function ends with a return code indicating an error The message that follows CADDO60I indicates the return and reason code of the ALESERV request Action This is an internal error Contact Technical Support Chapter 1 CADDSPL Messages 27 CADDSPL CADDO78E CADDO79E CADDO80I 28 Message Guide SPLx MAXAP greater than system MAXCAD in IEAYSYSxx SPLx is the CADDSPL ID Reason The MAXAP value is higher than the MAXCAD value of the IEASYSxx member of the SYS1 PARMLIB library The message that follows CADDO6OI indicates MAXDS Maximum Data sets as the return code and MAXCAD as the reason code Action Verify the MAXAP a
74. transfer request If the error persists save all error information and contact Technical Support Error Closing PC Download Binary Report File Reason An error occurred while attempting to close a report file for a binary download Action Re attempt the transfer request If the error persists save all error information and contact Technical Support Chapter 5 DC Messages 301 DC Messages DC900631 DC900632 DC900633 302 Message Guide Error Deleting PC Download ACIF Status File Reason An error occurred while attempting to delete the ACIF Status File for the binary download report Action This message is preceded by a combination of messages DC970120 through DC970130 Perform the action required by the messages Re attempt the transfer request If the error recurs it will be preceded by another error message Save all error information and contact Technical Support File Ffff FEEFEE E fFF Reason PC Download Binary File name in error Action None CADSDLBF ESTAE Recovery Routine Invoked Reason A program exception occurred in program CADSDLBF and its ESTAE recovery routine was invoked Action Re attempt the transfer request If the error persists save all error information and contact Technical Support DC900640 DC900641 DC900642 DC Messages BUNDLE REPRINT ERROR ACCESSING DATABASE ERROR STATUSS ssss rrrrrrrrrrrr Reason An error occurred while attempting to reprint a
75. utility while performing file synchronization completely deletes all OLV reports from the LDS file Action Save all error information and contact Technical Support PpPpppppp Status Update Failed ACIF Utility Must Be Rerun Reason The indicated ACIF processing program encountered an error attempting to update an ACIF Status File Action This message is preceded by messages DC970120 through DC970130 Perform the action required by the preceding messages Rerun the ACIF request If the error reoccurs it is preceded by another error message Save all error information and contact Technical Support INVALID EXECUTION PARAMETER Reason Parameter information is missing Check the SYSOUT for the message CADSARCN EXEC PARM xxxxxx where xxxxxx is the parameter The message is blank after the LOGIC LINES and REPORTS parameters are missing Action Correct the problem then resubmit the job DCDO106E DCD107E DCD0120E DCDO122E DCD Messages LINES INVALID MUST BE gt ZERO Reason Invalid or missing LINES parameter LINES must be numeric and greater than zero Action Correct the problem then resubmit the job REPORTS INVALID MUST BE gt ZERO Reason Invalid or missing REPORTS parameter REPORTS must be numeric and greater than zero Action Correct the problem then resubmit the job Invalid Execution Parameters Reason This error message from program CADSBLDE notifies you t
76. xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The SAPI task finished its initialization phase Action None Chapter 1 CADDSPL Messages 59 CADDSPL CADD325E CADD326E 60 Message Guide SAPx taskid SAPI call error rc nnn xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH nnn is the decimal return code Reason The SAPI request for a new SYSOUT failed This is an internal error Action Contact Technical Support SAPx taskid SAPI interface error rc nn rtrn xxx reaS yyy x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH nn is the decimal request return code Xxx is the decimal result return code yyy is the decimal result reason code Reason A new SYSOUT cannot be serviced by the SAPI subsystem request This is a SAPI error Details regarding the return and reason codes can be found in the most current MVS release of the IBM manual Using the Subsystem Interface Action See the IBM documentation for return codes for the IEFSSREQ macro correct the error and rerun the job CADD328I CADD3291 CADD330I CADDSPL SAPx taskid shutdown in progress xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The SAPI task started its final phase Action None SAPx taskid shutdown complete xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI
77. 00259 DC900260 Dc900261 DC Messages CREATE OF OQ USER RECORD FAILED Reason A database error exists The download request could not be created Action Exit CA Dispatch and log on again then retry the function that caused the error Review the log for any CA IDMS messages that have occurred and take appropriate action based on those messages Refer to the CA IDMS Error Codes Messages volumes for more information Report the problem to Technical Support CREATE OF OQ RPAGES RECORD FAILED Reason A database error exists The download request could not be created Action Exit CA Dispatch and log on again then retry the function that caused the error Review the log for any CA IDMS messages that have occurred and take appropriate action based on those messages Refer to the CA IDMS Error Codes Messages volumes for more information Report the problem to Technical Support DATABASE ERROR READING OQ PC RECORD Reason A database error exists The download request could not be created Action Exit CA Dispatch and log on again then retry the function that caused the error Review the log for any CA IDMS messages that have occurred and take appropriate action based on those messages Refer to the CA IDMS Error Codes Messages volumes for more information Report the problem to Technical Support Chapter 5 DC Messages 223 DC Messages DC900262 DC900263 DC900264 DC900265 224 Message Guide REQUEST U
78. 1 CADD3091 SAPX will not start collect sysout until CADDSPLI is initialized x is the SAPI suffix Reason Informational The SAPI address space is waiting for the CADDSPL main address space In normal production the SAPI address space is started by the CADDSPL address space and this message should not be sent This message can appear when the SAPI address space is started manually Action None SAPx initialization in progress X is the SAPI suffix Reason The main task of the SAPI function is in the initialization phase Action None SAPX initialization complete X is the SAPI suffix Reason The main task of the SAPI function finished its initialization Action None 54 Message Guide CADDSPL CADD310W CADD311I CADD312I SAPx taskid Attach error rc nnn xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH nnn is the decimal return code Reason The main task failed to start this function This is an internal error Action Contact Technical Support SAPx taskid already started stopped xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason This message is sent in response to a task start or stop command The task is already in the requested status Action None SAPx taskid not started reason X is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH reason can be Not a SAPI
79. 20 for status information on a certain recipient s piece of a base report but there is no status information available on that recipient Action Enter the Cancel command REQUESTED REPORT IS NOT DEFINED Reason You requested a specific report and it does not exist on the database or you did not define the PRINTER PRINTER definition Action Define PRINTER PRINTER report definition if needed RECIPIENT FOR REQUEST REPORT CANNOT BE FOUND Reason You requested a display of information on a particular report recipient and the recipient does not exist on the database Action No action required NO STATUS INFO FOR THIS RECIPIENT Reason You are requesting report status information for a recipient but there is none Action DC900055 DC900056 DC900058 DC900060 DC Messages No action required FIRST STATUS RECORD DISPLAYED Reason You are inquiring into a series of status records this record is the first of multiple records Action No action required LAST STATUS RECORD DISPLAYED Reason You are inquiring into a series of status records this record is the last of multiple records Action No action required THE ENF CHECKPOINT FILE HAS BEEN INITIALIZED Reason You selected Option 6 of the Sysgen Option Menu to Initialize as ENF checkpoint Action No action required ALL ARCHIVED REPORTS MUST BE DELETED FIRST Reason You are attempting to return a ta
80. 3 MSG or ARCH Reason The SAPI task finished its final phase Action None SAPx taskid processing xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The SAPI task is processing a given JES data set This is an informational message completed by CADD360I CADD3611 and CADD362I to give the JES data set characteristics Action None Chapter 1 CADDSPL Messages 61 CADDSPL CADD331 CADD332E 62 Message Guide SAPx taskid allocation error rc nnn err xxxx info yyyy x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH nnn is the decimal return code XxXxX is the hexadecimal error code yyyy is the hexadecimal information code Reason The SAPI task received an error during the JES data set allocation process The return code error code and information code indicate the cause of the error message The JES data set file is not processed See Dynamic allocation return code for more information Action Take appropriate action depending on the return code Contact Technical Support if the error persists SAPx taskid deallocation error rc nnn err 00X info yyyy x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH nnn is the decimal return code XxXxX is the hexadecimal error code yyyy is the hexadecimal information code Reason The SAPI task received an error during the JES data set deallocation pro
81. 30I CADD360 CADD361 and CADD362 provide useful information to identify the JES data set Action If this message persists contact Technical Support SAPx taskid Unable to obtain SPLHDR2 slot for x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The SAPI task received an error when accessing internal data space control block for a given JES data set Messages CADD360 I CADD361 and CADD362I which follow the current message or the previous CADD3301 message give more information about the JES data set This is an internal error Action Contact Technical Support Chapter 1 CADDSPL Messages 65 CADDSPL CADD344S CADD345I 66 Message Guide SAPx taskid Unable to access type Block for GetBL S x is the SAPI suffix type is Data or Index taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The SAPI task received an error when accessing or updating an internal data space control block for a given JES data set Messages CADD360I CADD361 and CADD3621 which follow the current message or the previous CADD330I message give more information about the JES data set A dump is taken and the task is interrupted This is an internal error Action Contact Technical Support SAPx taskid LDS full Process in Stand by for xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The SAPI task detected an LDS full condition
82. 4 Recovering From Database Deadlock Reason RPO program CADSMFO04 has successfully recovered from a database deadlock condition This message will be preceded by an IDMS deadlock message Action None Online Viewing Pages Table Not Found Reason A report was marked for Online Viewing but the Online Viewing Pages Table from which OLV database records are created is missing This is an internal logic error Action Contact Technical Support Chapter 5 DC Messages 399 DC Messages DC980631 DC980632 400 Message Guide Scheduling Command Error Type t Module mmmmmmmm RC ccc Reason A command entered through Report Event Processing in MSG is in error or the scheduling module cannot be found Action Correct the command entered on screen VRDUM116 or have your system programmer add the module indicated into the CDMSLIB used by CA Dispatch Be aware of the following Type Identifies the scheduler being processed Type 1 CA Scheduler Type2 CA7 Module Identifies the name of the module you were trying to access or actually did access RC Identifies the problem encountered IN Invalid scheduling type must be 1 or 2 NF module Not Found ccc return code from scheduler module Invalid action x in Table Reason The action on the database is invalid must be C F or M Action Correct event actions defined for MSGCLASS DC980633 DC980634 DC980635 DC980636 Invalid Request
83. 5 DC Messages DOIM SSABES aineringe aaar aa RAKE a Ea E S EASE ESE EAEE EAREN Chapter 6 DCD Messages DED MG SSag OS innossa er eiee EEE Eaa ANE Ea Er Naa oiTa E Chapter 7 IDMS Messages Understanding CA IDMS Error Codes with CA Dispatch sesseeeeseersrerirrererrerees Chapter 8 LMP Messages and Abends LMP Messages and Abend cc eescesecesseeceeeeeeseeceeeesaeeceeeeeeneeceaeeeeaeeceeeeeaeeesaeessaees Chapter 9 Abend and VTAM Error Codes System Abend COGS isrcaceecncnavsccccudssscneis svisdwnsesscucvaesscsunalcs bansuseeusundestesunesnasvandawsanseens S713 ANG S693 ADO Sicsiczicsiccchestccessienccs ae sie dene aor aa EEr E Eire ELITA User Abends sesicceisacticedonkcosaceswacadanaedcadaetvacaiiteardcadae vaseilasvdcaiaesrdcdvaantcalues siesinessncebeetences Chapter 10 CA Health Check Messages CA Health Check Messages sesseessesssesrrssrrserserrserssrenstnstenssrttensterstessressreeseeseeesennee 155 157 169 411 445 449 451 Contents 5 Chapter 1 CADDSPL Messages This chapter lists messages preceded by the characters CADD This section contains the following topics CADDSPL see page 7 CADDSPL The CADD messages follow CADDOO6I Loading CADDSPL lt module gt module is the name of the ENFSPL module that is being loaded into LPA Reason Informational response to the F SPLx ADD command Action None CADDOO7I lt SPLx gt lt task gt CLASS lt class gt DE
84. 621I CADDSPL UTIL Root LDS too small for MaxDS value Reason The space specified in the Root LDS Define command is not large enough to contain the needed 4 KB blocks Action Use the suggested formulas to calculate the required space on the root LDS See the Getting Started for information about computing the optimum root LDS size UTIL ddname VSAM dataset attributes Reason This is the first of nine messages giving characteristics about the LDS referenced by the DD statement ddname Action None UTIL Dsname dsname Reason This is the second of nine messages giving characteristics about the LDS referenced by the DD statement ddname This message specifies the dsname of the LDS Action None Chapter 1 CADDSPL Messages 97 CADDSPL CADD6221 CADD6231 CADD6241I 98 Message Guide UTIL High Alloc RBA hhhhhhhh Reason This is the third of nine messages giving characteristics about the LDS referenced by the DD statement ddname This message specifies the relative block address of the highest allocated byte in the LDS Action None UTIL High Used RBA hhhhhhhh Reason This is the fourth of nine messages giving characteristics about the LDS referenced by the DD statement ddname This message specifies the relative block address of the highest used byte in the LDS Action None UTIL Extentsin use nnnn Reason This the fifth of nine messages giving characteristics about
85. 900527 DC900528 DC900529 DC900530 274 Message Guide User uuuuuuuu CCI Term Error Reason Program CADSCANR received an error on a CAICCI Term request on behalf of the specified user Action This message is followed by a DC900528 message indicating the error encountered Attempt the transfer request again If the problem persists save all error information and contact Technical Support Error XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Reason Program CADSCANR received a CAICCI error This message contains the error text Action None User uuuuuuuu CCI Session Cancelled Reason Program CADSCANR has successfully canceled a CAICCI session for the specified user Action None CCI Transfer Router for xxxxxxxx is Already Active Reason An attempt has been made to start the CA Dispatch CAICCI Transfer Router CADSXCRT for the specified CA Dispatch VTAM applid However the transfer router is already active Action End the transfer router with the CADSXCRE task code and then restart DC900531 DC900532 DC900533 DC Messages CCI Transfer Router for xxxxxxxx is Active Reason The CA Dispatch CAICCI Transfer Router task CADSXCRT is successfully started for the specified CA Dispatch VTAM applid Action None CCI Transfer Router for xxxxxxxx has Ended Reason The CA Dispatch CAICCI Transfer Router task CADSXCRT has successfully ended for the specified CA Dispatch VTAM applid
86. 970078 DC970079 DC Messages Error Updating Report on CADDSPLx RC cc CADDSPLx is the the STCname of the initialization address space Reason The Bundle Recovery program encountered an error attempting to update a report on CADDSPL while restoring bundled reports from it Action m Review the error messages that precede this message m If CADDSPL is not active start it and enter the BSTORE task at the CA Dispatch Enter Next Task Code prompt to retry the bundle recovery If the problem persists contact Technical Support Subtask for Program pppppppp Successfully Terminated Reason The CA Dispatch Recovery Termination Manager detected and successfully terminated a CA Dispatch foreground subtask Action None Subtask for Program pppppppp Cannot be Terminated Possible SA03 Reason The CA Dispatch Recovery Termination Manager detected but could not terminate a CA Dispatch foreground MVS subtask This will usually result in an SA03 abend after CA Dispatch completes its shutdown processing Action Save all dump and error information and contact Technical Support Chapter 5 DC Messages 329 DC Messages DC970080 represents one of the following messages SMF Record Length in RDW is Less Than 18 or a SMF is Not Active or SMF Write Suppressed by IEFU83 Exit or SMF Record Not Written Data Lost or SMF Record Not Written Type Not Being Recorded or SMF Record Not Written SMF Buffer Shortage or
87. 970101 through DC970104 See these messages for the appropriate action Error Allocating ACIF Parm Library Reason An error occurred while attempting to allocate an ACIF Parameter library This message is preceded by a DC970033 message Action See if the ACIF Parm Library can be browsed online If yes save all error information and contact Technical Support Error Opening ACIF Parm Library Reason An error occurred while attempting to open an ACIF Parameter library Action See if the ACIF Parm Library can be browsed online If so save all error information and contact Technical Support Error Reading ACIF Parm Library Reason An error occurred while attempting to read an ACIF Parameter library Action See if the ACIF Parm Library can be browsed online If yes save all error information and contact Technical Support Chapter 5 DC Messages 335 DC Messages DC970114 DC970115 DC970116 DC970117 336 Message Guide Error Closing AFP Parm Library Reason An error occurred while attempting to close an ACIF Parameter library Action See if the ACIF Parm Library can be browsed online If yes save all error information and contact Technical Support Error Deallocating ACIF Parm Library Reason An error occurred while attempting to deallocate an ACIF Parameter library This message is preceded by a DC970033 message Action See if the ACIF Parm Library can be browsed online If yes s
88. AGES DEFINED FOR THIS REPORT ADD OR CANCEL Reason There are no events defined for this report Action Add an event or exit the screen Chapter 5 DC Messages 203 DC Messages DC900154 DC900155 DC900156 DC900157 204 Message Guide THE MESSAGE ENTRY IS IGNORED FOR THIS EVENT LEVEL Reason A message entry is not valid for the event level Action The message entry is ignored during processing INVALID CURSOR POSITION FOR EVENT EXTENSION SELECTION Reason The cursor position is invalid for event selection Action Reposition the cursor and try the function key again EVENT RECORDS CANNOT BE ADDED WITH FUNCTION KEY PF9 Reason The PF9 function cannot add event records Action Press Enter to add the records EVENT LEVEL RECORD INVALID AS FIRST RECORD WILL BE BYPASSED Reason This event level cannot be the first record for a report event list The online will ignore all level events until a non level is encountered Action Enter the appropriate event level record first DC900158 DC900159 DC900160 DCc900161 DC Messages NO MESSAGES DEFINED ADD OR CANCEL Reason No MSGCLASS events are defined Action Add an event or exit the screen REPORT RECIPIENT DOES NOT EXIST PLEASE ADD OR CANCEL Reason The report recipient you are working with has been deleted by another user Action Add the report recipient again or exit the screen RE
89. ASE RECORD xxxxxxxx NOT FOUND FROM MODULE xxxxxxxx Reason Processing of the requested function cannot continue because the required database record as indicated cannot be retrieved Action Exit the current screen and redo the process that failed If the error occurs again contact your CA Dispatch administrator to redo Sysgen screen processing to create the missing record NO MESSAGE CLASS REPORTS EXIST Reason There are no message class reports in the Online Viewing database Action A report s MSGCLASS data must be processed by CA Dispatch in order to be added to the Online Viewing database DC900199 DC900200 Dc900201 DCc900202 DC Messages PROCESS ERROR IN MODULE mmmmmmmm WAS eeeeeeee Reason The specified Online Viewing module received the indicated error and is displaying it on the screen Action View the CA Dispatch log files for any supporting error messages If there are no other error messages or the actions for those error messages do not resolve the problem save all error information and contact Technical Support scrname SCREEN HELPTEXT DELETED Reason Informational message from the CA Dispatch help text batch utility Action None scrname SCREEN HELPTEXT MODIFIED Reason Informational message from the CA Dispatch help text batch utility Action None scrname SCREEN HELPTEXT NOT FOUND Reason Informational message from the CA Dispatch help text batch utility
90. Action Check the command XXXX Keyword prohibited with Function xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason keyword is not authorized for the function of the command Action Check the command XXXX Required keyword parameter missing xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason The required parameter keyword is missing for the command Action Check the command CADD729E CADD730E CADD732W CADD733W CADDSPL XXXX Required function missing Keyword s xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason The keyword or keywords for this command are missing Action Check the command XXXX Function funcl and func2 mutually exclusive xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason Two mutually exclusive functions were specified for the command Action Check the command UTIL ranges low1 high1 and low2 high2 merged Reason The ranges specified are consecutive and were merged together Action Check the command UTIL range low 1 high1 already included in low2 high2 Reason The range low1 high1 is a part of the range low2 high2 and is ignored Action Check the command Chapter 1 CADDSPL Messages 125 CADDSPL CADD734E CADD735E CADD800E CADD801E 126 Message Guide XXXX 1st 2nd Value of Util must be higher than 49 1st Xxxx is a CADDUTIL ID
91. Action If the spool interface was not started start the spool interface If the spool interface is not capturing data correct the event constraint condition SPLx CAIENF IS NOT ACTIVE SPLx is the CADDSPL ID Reason Error condition An attempt was made to start the CADDSPL but CAIENF is not started Action Start CAIENF before starting CADDSPL Chapter 1 CADDSPL Messages 33 CADDSPL CADDO097E W SPLx already active SPLx is the CADDSPL ID Reason Error or Warning condition An attempt was made to start a CADDSPL but this CADDSPL is found to be already active Only one instance of each CADDSPL address space can be active at a time During a normal initialization this message is issued as an Error condition and the CADDSPLI stops immediately If this message is issued when there is no CADDSPL address space running it is because of a corrupted control block In this case a FORCE option can be specified on the CADDSPLI start up to allow the restart of the CADDSPL Note that if the FORCE option is specified the message will be changed to a Warning level and will be followed by the CADD113W message Action Do the following 1 Make sure the CADDSPL address space is already active by sending for example a F SPLx STAT command 2 Ifthe CADDSPL address space is not active restart the CADDSPLI with the FORCE option Note Starting the CADDSPL twice can lead to unpredictable results and the FORCE option bypa
92. BUNDLE bbbbbbbb Reason AFP resource type ttttttt with name rrrrrrrr cannot be found in the defined AFP libraries for the bundle Action The bundle will continue to print Access the Inline AFP Resource screens from screen VSGMU100 Access screen VSGMU245 and find the Inline AFP Resource Group that is defined for one of the bundle s recipients screen VRDMU130 Determine the Library Group specified on the Inline AFP Library Resource Definition Screen VSGMU250 Enter S next to the correct Library Group name and on screen VSGMU255 enter the AFP Resource Library name that contains the resource being flagged Default ttttttt rrrrrrrr Not Found for BUNDLE bbbbbbbb Reason Default AFP resource type ttttttt with name rrrrrrrr cannot be found in the defined AFP libraries for the bundle Action The bundle will continue to print Access the Inline AFP Resource screens from screen VSGMU100 Access screen VSGMU241 and insert the correct Default Pagedef and Formdef Library names Unable to Load tttttttt rrrrrrrr into BUNDLE bbbbbbbb Reason AFP resource type ttttttt with name rrrrrrrr cannot be loaded into the bundle Action The bundle will continue to print This message is preceded by another error message Reference that error message to determine the problem DC980448 DC980449 DC980450 DC980451 DC Messages Unable to Load Default tttttttt rrrrrrrr into BUNDLE bbbbbbbb Reason Default AFP resource
93. Bad SplHdr0 Control Block Missing HDRO Invalid HDRO Invalid version Reason An error was discovered in the LDS control block Sp Hdr0 Action Verify your ROOT LDS successfully initialized and you are using a DD statement when addressing it UTIL New extent got taken on Root LDS ddname Reason The CADDUTIL switched on a new extent to format or to initialize a block Action None UTIL Removing Freezing Resetting Append LDS ddname Reason The process to remove freeze or reset an Append LDS was started Action None Chapter 1 CADDSPL Messages 103 CADDSPL CADD644W CADD645I CADD646E 104 Message Guide UTIL Append LDS ddname Token Jobname Jobld stepname ddreport nnnn Blocks Reason A request to remove an Append LDS has been issued This LDS still contains report data This condition prevents the removal of the Append LDS ddname is the DD name the LDS is allocated to Token is the token of the HDR2 for this report Jobname is the JOB name that produced the report Jobld is the JES id of the JOB that produced the report stepname is the name of the step in the JOB that produced the report ddreport is the DD name of the sysout from which the report was produced nnnn is the number of blocks of data in use for this report in the LDS allocated to ddname One CADD644W message is issued for each report owning data in this Append LDS Action Verify that this report is still active
94. Be sure your operators are aware that CA Dispatch will occasionally submit a batch job that will require a tape job They should not cancel this job or IPL while it is running To recover from a 2107 abend first look at the journal report provided by the DSEXJNL1 job and find the journal in error Change parameters as follows change PROG to IDMSXJNL and MEMBER to DSJRNLn n 1 to 4 depending on the problem journal Run DSEXJNL1 as a one time run only If this run is successful enter STOPCADS and after the system comes down cleanly run DSEXBRO1 and then restart CA Dispatch after the backup completes If the special run of DSEXJNL1 is unsuccessful and it abends perform the following 1 Shut down CA Dispatch with STOPCADS 2 If Step 1 is unsuccessful cancel the system and try to restart it If the message WARMSTART SUCCESSFUL appears on the console cancel CA Dispatch and continue If WARMSTART SUCCESSFUL does not appear cancel CA Dispatch restore the file with DSEXBRO4 and run DSEXJFIX 3 Run job DSEXJFIX to initialize the journals 4 Run job DSEXPFIX to reset the file flags 5 Restart CA Dispatch This abend can occur when DSEXJNL1 is submitted and there are no journals to unload to tape No further action is needed Chapter 7 IDMS Messages 447 Chapter 8 LMP Messages and Abends This chapter lists LMP messages and abends This section contains the following topics LMP Messages and Abends see page 449
95. C Messages 239 DC Messages DC900361 DC900362 DC900363 DC900364 240 Message Guide TO CONFIRM COMPLETION PLEASE PRESS THE ENTER KEY Reason To change a pending automated transfer request from PENDING to COMPLETED press Enter Action Press Enter to modify the request or press PF2 to cancel REQUEST MARKED AS COMPLETED Reason The automated transfer request is now complete Action Press PF3 to return or process the next request OPTION ONLY AVAILABLE FOR PENDING AUTOMATIC REQUESTS Reason The option value C was entered for a transfer request that is not pending and automated Action Change C value to a valid option DSRQSDEL STAE ROUTINE INVOKED Reason A program exception occurred in program DSRQSDEL and its STAE recovery routine was invoked Action Try the update again If the problem persists contact Technical Support DC900366 DC900367 DC900368 DC900369 DC Messages PROGRAM CADSUB01 CADSUFG1 LOGIC ERROR Reason Internal program error Action Contact Technical Support OPTION IS NOT AVAILABLE FOR THIS SCREEN IN OLVO Reason The requested function cannot be performed in OLVO Action Sign on to the main CA Dispatch system to perform the desired task MAIN REGION NOT ACTIVE COMMAND IGNORED Reason Either the CA Dispatch region is not active or the OLVO region cannot read the file pointed to by DISPCTL DD statement Action If acc
96. CA Dispatch Message Guide Release 11 7 This Documentation which includes embedded help systems and electronically distributed materials hereinafter referred to as the Documentation is for your informational purposes only and is subject to change or withdrawal by CA at any time This Documentation may not be copied transferred reproduced disclosed modified or duplicated in whole or in part without the prior written consent of CA This Documentation is confidential and proprietary information of CA and may not be disclosed by you or used for any purpose other than as may be permitted in i a separate agreement between you and CA governing your use of the CA software to which the Documentation relates or ii a separate confidentiality agreement between you and CA Notwithstanding the foregoing if you are a licensed user of the software product s addressed in the Documentation you may print or otherwise make available a reasonable number of copies of the Documentation for internal use by you and your employees in connection with that software provided that all CA copyright notices and legends are affixed to each reproduced copy The right to print or otherwise make available copies of the Documentation is limited to the period during which the applicable license for such software remains in full force and effect Should the license terminate for any reason it is your responsibility to certify in writing to CA that all copies
97. Code x Reason DC Messages A bad request was made between modules This is an internal logic error Action Contact Technical Support Line Address Missing Reason The table address is missing This is an internal logic error Action Contact Technical Support No Continuation Pointer Reason The table pointer is missing This is an internal logic error Action Contact Technical Support Insufficient Storage for Criteria Rules Reason There is insufficient storage available for the MSG task Action Restart MSG Chapter 5 DC Messages 401 DC Messages DC980640 DC980641 DC980642 DC980643 402 Message Guide Error Allocating MSGCLASS SYSOUT File Reason An error occurred while attempting to allocate a JES output data set for MSGCLASS This message is preceded by DC970020 and DC970022 messages Action Save all error information and contact Technical Support Error Deallocating MSGCLASS SYSOUT File Reason An error occurred while attempting to deallocate a JES output data set for MSGCLASS This message is preceded by DC970020 and DC970022 messages Action Save all error information and contact Technical Support Error Opening MSGCLASS SYSOUT File Reason An error occurred while attempting to open a JES output data set for MSGCLASS Action Save all error information and contact Technical Support Error Closing MSGCLASS SYSOUT File Reason An err
98. D MODULE nnnnnnnn ERROR nn Reason A request was made to print pages but no pages were set to be printed Action The P command must be issued to designate pages for print before the PRINT command is used to go to the print screen and the print is requested NO MSGCLASS DATA TO VIEW FOR SELECTION CRITERIA SPECIFIED Reason The cursor was incorrectly positioned to make the selection Action Reposition the cursor correctly MSGCLASS RETENTION HAS ASSOCIATED VIEW DATA CANNOT DELETE Reason You are trying to erase an online retention MSGCLASS entry that has view entries on file such MSGCLASS entries cannot be deleted Action Enter CANCEL to exit DC900127 DC900128 DCc900129 DC900130 DC Messages SECURITY TASK CANNOT OBTAIN STORAGE FOR USER nnnnnnnn Reason No storage is available for GETSTG command Action Wait for other users to sign off Increase the IDMS storage pool parameter in the DSSYSXA CADSOPTN member Submit the DSEXUSR1 job in CADSJCL and review the output to ensure that it executed properly SECURITY FOREGROUND TASK HAS ABENDED FOR USER nnnnnnnn Reason A coding error occurred in your security exit Action Contact your systems programming department SECURITY FOREGROUND TASK ATTACH NOT SUCCESSFUL FOR USER nnnnnnnn Reason The security exit is incurring system problems Action Contact Technical Support SECURITY VIOLATION HAS OCCURED FOR USER nnnnnnnn
99. DD601I CADD6021 CADD6031 92 Message Guide UTIL CADDUTIL utility starts Reason The CADDUTIL utility is starting Action None UTIL Parsing control statements Reason The CADDUTIL is on the parsing phase Action None UTIL Command line Reason The CADDUTIL is displaying the command line to analyze Action None UTIL Input complete processing request Reason The CADDUTIL utility completed the parsing phase Action None CADD604E CADD605I CADD606I CADD6071 CADDSPL UTIL Command not processed by CADDUTIL Reason The CADDUTIL utility is unable to process this command Action Verify that this is a valid command for CADDUTIL UTIL formatting Root Append LDS ddname Reason The CADDUTIL utility is formatting the root or append LDS referenced by the ddname Action None UTIL Updating root LDS ddname Reason The CADDUTIL utility is formatting the root LDS referenced by the ddname Action None UTIL Formatted nnnn 4K blocks Reason This message indicates the exact number of 4 KB blocks initialized during the last format command Action None Chapter 1 CADDSPL Messages 93 CADDSPL CADD608I CADD6091 CADD610E CADD612E 94 Message Guide UTIL SplHdr0 rewritten on ddname Reason The SplHdr0 control block was successfully rewritten on the root LDS referenced by the ddname Action None UTIL CADDUTIL ut
100. DDSPL task No Records Possible Empty LDS Reason No records were found by CADDSPL This will occur if no reports were sent to the interface Action Send report output data to the class destination values set on screen VSGMU105 Invalid CAS9SPL Data List Reason An invalid parameter list was passed to CADDSPL This is an internal logic error Action Contact Technical Support CAS9SPL API Error Reason An error was encountered by CADDSPL during processing of CAS9SPL request Internal logic error Action Contact Technical Support DC970013 DC970014 DC Messages Invalid LDS Token or Data Error Reason Either an invalid LDS Token was passed on a read request or the SPLHDR2 record contains bad data pointers Internal logic error Action Contact Technical Support represents one of the following messages SPLHDR2 Not Found in Data Space Reason An invalid LDS Token was passed on an update request This is an internal logic error Action Contact Technical Support Invalid LDS Token Reason An invalid LDS Token was passed on an update request This is an internal logic error Action Contact Technical Support Invalid CAS9SPL Data List Reason An invalid LDS Token was passed on an update request This is an internal logic error Action Contact Technical Support Chapter 5 DC Messages 307 DC Messages Update Error RC rc Reas reas Reason An invalid retu
101. DSCVT Reason The CA Dispatch Central Vector Table could not be allocated in the IDMS Storage Pool A CA Dispatch bundle recovery program has started to determine if a backup is needed Action Increase the STORAGE POOL value in the current CA Dispatch Usergen option member Chapter 5 DC Messages 317 DC Messages DC970047 DC970048 DC970049 DC970050 318 Message Guide Aborting Startup Opsys Not MVS ESA Reason CA Dispatch can only execute on MVS ESA or higher operating systems Action Contact Technical Support Aborting Startup Unable to Load CADSPGT Reason The CA Dispatch Central Program Table could not be loaded into the IDMS program pool Action Contact Technical Support Aborting Startup Unable to Attach Log Driver Reason The CA Dispatch Log Driver Subtask could not be started Action Try to start the Log Driver with the S DLOG command If this fails all messages will be written to the operator s console and will not prevent CA Dispatch from executing Contact Technical Support A VTAM Line Cannot Be Found Reason The VTAM line VTMSYSO1 was not built using the CA Dispatch Usergen Action Use the CA Dispatch Usergen procedure to add a VTAM line named VTMSYS01 if a VTAM line is required DC970051 DC970052 DC970053 DC970054 DC Messages CA Dispatch Recovery Termination in Progress Reason The CA Dispatch Recovery Termination Manager subtask was invoke
102. DSPL ID operation is the required command reason indicates the reason the command did not run Reason This message indicates the reason CADDSPL is not able to process the given command Operation can include m add define a Task characteristic m delete delete a Task definition m free free the Name Token couple associated to the task m quiesce halt all updating tasks m resume restart all updating tasks m set update some global parameters m start start a given task or only its intercept or SAPI task m stop stop a given task or only its intercept or SAPI task Reason can include m For add and delete commands CADDPSL in Close or Quiesce mode Intercept is not down SAPI task is not down File s still to recover m For free set start and stop commands CADDPSL in Close or Quiesce mode For quiesce command CADDPSL in Close mode For resume command CADDPSL in Close or Quiesce mode CADDPSL not in Quiesce mode Action None Chapter 1 CADDSPL Messages 39 CADDSPL CADD131 CADD134W 40 Message Guide SPLx Date Time U Exit Failed RC 00000010 Reason 000000xx SPLx is the CADDSPL ID xx is the reason code Reason The Date Time User Exit was automatically deactivated due to unexpected results Action See the CA Dispatch Systems Programmer Guide for explanation of the reason codes Correct the Date Time Exit and restart lt SPLx gt Captured Reports reached of MAXDS lt
103. Dispatch CAILOG Chapter 3 CAHF Messages These messages can be found in the CA DRAS Operations Guide Chapter 3 CAHF Messages 155 Chapter 4 CAG Messages This chapter lists messages preceded by the characters CAG This section contains the following topics CAG Messages see page 157 CAG Messages The CAG error messages follow CAGLOO1E THE FOLLOWING FIELD IS IN ERROR XXX XXX Reason The load program has detected a field error in the record to be added in field xxx xxx This error can occur when adding any type record For fields that do not require a value blanks are acceptable as field input for numeric or alphanumeric fields If numeric the field must be completely blank A field error occurs when m A required field has not been supplied An invalid value has been supplied for an alphanumeric field that only allows a limited number of values m Anumeric field is not blank or completely numeric watch for numeric fields with mixed blanks and numbers Action Correct the field value Examples of field errors follow Field Record Type Specific Error REPORT NAME 1or3 First character of REPORT NAME is neither alphabetic nor a special character PAGE DEFN FLAG 4 FLAG is not valid Valid values are blank Y S and E PAGE DEFN LINE 4 LINE is not valid The field must be numeric PAGE DEFN COL 4 COLUMN is not valid The field must be numeric Chapter 4 CAG Messages 157 CAG Messages CA
104. E DCDO015E 414 Message Guide nnnnnnnn Is INVALID STATEMENT TYPE TRANSACTION REJECTED Reason The statement you input is not a recognized valid statement in CA Dispatch Action Check your input to see if you entered the statement correctly FIELD EXCEEDS 63 CHARACTERS ON STATEMENT Reason You input a field containing more than 63 characters this exceeds the maximum field length permitted in CA Dispatch Action Check your input to see if you included the proper delimiters to indicate the end of field PARTIAL DATE RANGE SUPPLIED ON STATEMENT nnnnnnnn TRANSACTION REJECTED Reason You supplied a statement that requires a complete From and To date range you did not include one of the required date parameters Action Check your input to see if you supplied both dates for the range and if you included the proper delimiters to indicate the end of one field and the beginning of the next MORE THAN 8 OPERANDS WITHIN STATEMENT nnnnnnnn Reason You input a statement with more than eight operands this exceeds the maximum number permitted in CA Dispatch Action Check your input to see if you included the correct delimiters to indicate the end of the operands or the statement DCDO016E DCDO017E DCDO018E DCD Messages MORE THAN 8 FIELDS WITHIN OPERAND ON STATEMENT nnnnnnnn Reason You input a statement with more than eight fields this exceeds the maximum number of fields permitted in CA Dispatc
105. E OR CLASS MUST BE SUPPLIED Reason When defining labels through VRDMU700 you must specify the device or class on which you want the label to print Action Specify the device or class FICHE INFORMATION NEEDS TO BE ADDED Reason You are entering fields on the Report Recipient Definition Screen Fiche VRDMU160 but the record does not yet exist on the database Action Enter the ADD command to add or CANCEL to cancel the operation STATUS HAS BEEN UPDATED Reason You successfully updated the Delivered Time on the Feedback Update Screen VRDMUSO0 Action No action required DCc900025 DCc900026 DC900027 DC900028 DC Messages NO STATUS INFORMATION IS AVAILABLE Reason You are inquiring into the CA Dispatch status screens but no status information is available for the bundles or reports about which you are inquiring Action No action required PLEASE SUPPLY THE REPORT NAME Reason You are inquiring into the CA Dispatch report definition or status screens Action Enter the report name in the report field If you cannot remember the report name look through the scroll screens until you find it SECURITY CODE VIOLATION REQUESTED CHANGE DENIED Reason You attempted to execute a function for which you do not have password authority Action Enter CANCEL INCOMPLETE SYSGEN INFO SELECT OPTION 9 Reason User Sysgen information defined to the database is incomplete
106. E PLEASE PRESS THE ENTER KEY Reason Incomplete attempt to delete a record from the database Before CA Dispatch can delete this record you must confirm the deletion by pressing Enter Action Press Enter If you do not want to delete the record press PF2 to cancel Dc900011 DCc900012 DC900013 DC900014 DC Messages DELETION COMPLETE Reason You are deleting a record from the database Before CA Dispatch can complete this process the deletion must be confirmed You pressed Enter and CA Dispatch deleted the record Action No action required INFORMATION ADDED Reason You are adding either a base report a report recipient or a recipient record to the database and you pressed PF10 to complete the function CA Dispatch is informing you that it has added the record to the database Action No action required RECIPIENT DOES NOT EXIST PLEASE USE ADD FUNCTION Reason You entered data in fields on a report recipient or a recipient screen but the record does not yet exist in the database Action Use the ADD function to add the record or PF2 to cancel NO ONLINE VIEWING RECIPIENTS FOR THIS USER Reason The user cannot access a recipient list because none was created Action Add a list of valid recipients for this user Chapter 5 DC Messages 175 DC Messages DC900015 THERE ARE NO RECIPIENTS DEFINED FOR THIS REPORT ENTER CANCEL COMMAND Reason You attempted to view infor
107. ETE Reason The bundle is now deleted Action None NO AFP CONTROL RECORD EXISTS UPDATE DISPLAYED INFORMATION Reason The AFP Default Control record does not exist on the database Action Enter the required information on screen VSGMU240 Chapter 5 DC Messages 261 DC Messages DC900464 DC900465 DC900466 DC900467 DC900468 262 Message Guide NO AFP RESOURCE GROUPS EXIST Reason No AFP resource groups exist to be displayed on screen VSGMU245 Action Enter the required information on screen VSGMU245 to add resource groups DUPLICATE RESOURCE GROUPS NOT ALLOWED Reason The entered resource group name already exists on the database Action Enter a different name INVALID AFP LIBRARY GROUP NAME Reason The entered AFP library group name is invalid Action Enter a different name NO AFP LIBRARY GROUPS EXIST Reason No AFP library groups exist to be displayed on screen VSGMU250 Action Enter the required information on screen VSGMU250 to add AFP library groups DUPLICATE LIBRARY GROUPS NOT ALLOWED Reason DC900469 DC900470 DC900471 DC Messages The entered AFP library group already exists on the database Action Enter a different name LIBRARY GROUP DEFINED TO RESOURCE GROUP S Reason An AFP library group was selected for deletion but it is still defined to one or more AFP resource groups Action Remove the library group from t
108. GLOO2E CAGLOO3E CAGLOO4E 158 Message Guide Field Record Type Specific Error PAGE DEFN TEST 4 TEST is not valid Valid values are EQ GT GE NE LT and LE PAGES MAILDROP 5 MAX NUMBER OF PAGES is not valid The field MAX must be numeric This field is required to add a MAILDROP record TIME 5 MAX TIME is not valid The field must be numeric MAILDROP MAX This field is required to add a MAILDROP record JDE ID 7 JDE ID field is blank This is a required field REPORT BASE RECORD TO BE ADDED ALREADY EXISTS Reason Occurs when adding record Type 1 The REPORT NAME and JOBNAME combination already exists on the database Duplicates are not allowed Action Check the fields and enter the correct values RECIP BASE RECORD TO BE ADDED ALREADY EXISTS Reason Occurs when adding record Type 2 The RECIPIENT already exists on the database Duplicates are not allowed Action Check the field and enter the correct value REPORT BASE RECORD FOR THIS RECIP DOES NOT EXIST Reason Occurs when adding record Type 3 The prerequisite REPORT and JOB NAME base record Type 1 is not on the database Action Add the Type 1 record to the database CAGLOO5E CAGLOO6E CAGLOO7E CAGLOO8E CAG Messages BASE RECIP RECORD FOR THIS REPORT RECIP DOES NOT EXIST Reason Occurs when adding record Type 3 The prerequisite RECIPIENT base record Type 2 is not on the database Action Add the Type 2 record to the datab
109. I tasks and delete tasks are going inactive As long as at least one of these tasks is still running this message is displayed Action None SPLX is quiesced SPLx is the CADDSPL ID Reason Informational This message indicates that all of the updating tasks are now stopped Only the read only functions are active on the LDS Action None SPLx Name Token error rc nnnn for SPLx is the CADDSPL ID nnnn is the hexadecimal return code of the name or token function Reason Unable to get the name or token associated with a given intercepted report This message is followed by CADDO084I and CADDO85I specifying the related report Action If this error occurs frequently contact Technical Support CADDO42W CADDO43W CADDO44W CADDSPL SPLx delete enforced for empty orphan report SPLx is the CADDSPL ID Reason When shutting down an intercept by a STOP IMMED QUIESCE IMMED or CLOSE IMMED command the report opened by the intercept is orphaned because no more tasks are associated with it and no line was written to it This report is deleted The report is specified by the CADD084I and CADDO85 messages Action This may be normal when for example the address space creating this report is no longer available If this error occurs frequently contact Technical Support SPLx close enforced for orphan report SPLx is the CADDSPL ID Reason When shutting down an intercept by a STOP IMMED QUIESCE IMMED or CL
110. IND command Action Reenter the command PROGRAM OVBGVIEW CANNOT OPEN DISPCTL FILE Reason The OLVO region cannot open the file indicated in the DISPCTL DD statement Action Be sure this DD statement is included in the OLVO startup JCL ARR FUNCTION INVALID FOR NON ACIF REPORTS Reason You requested that the ACIF be rerun to correct errors on the prior running of the utility but this is not an ACIF report Action None INVALID PARAMETER FOR THE FIND COMMAND xxxxxxxx Reason You entered an invalid parameter of xxxxxxxx on the FIND command Action Reenter the command Chapter 5 DC Messages 243 DC Messages DC900381 DC900382 DC900383 DC900384 THE STRING WILL NOT FIT BETWEEN THE SPECIFIED COLUMNS Reason You entered a string that is larger than the start and end column range specified Action Reenter the string or enlarge the start end column range PRINTER AND CLASS DEST OVERRIDE ARE MUTUALLY EXCLUSIVE Reason You specified both the printer and class destination overrides You can only enter one The printer override fills in the appropriate class dest combination Action Delete one of the entries SPECIFIED PROFILE IS NOT DEFINED Reason You specified an invalid profile name Action Reenter the profile name SPECIFIED PROFILE ALREADY EXISTS Reason You specified a profile during a SPRO command that already exists Action Reenter the profil
111. ITHIN JOB hnnnnnnnn Reason You input a statement that creates a report that lists base reports and recipients CA Dispatch found a report on its database for which there are no recipients defined This message is informational only Action You may want to define recipients for this report Chapter 6 DCD Messages 417 DCD Messages DCDO025E DCDOO026E DCDO0027E DCDOO28E 418 Message Guide THIS RUN HAS BEEN TERMINATED DUE TO AN ERROR CONDITION ON THE DATA BASE Reason CA Dispatch found an error condition on its database and terminated this run Action None PLEASE DISREGARD ANY REPORTS GENERATED FROM THIS RUN Reason This message is informational only Action None ANY DATA BASE UPDATES PERFORMED DURING THIS RUN HAVE BEEN ROLLED BACK Reason This message is informational only Action None UNPAIRED RIGHT PARENTHESIS WITHIN STATEMENT nnnnnnnnnnnnnnnn TRANS REJECTED Reason CA Dispatch found a right parenthesis indicating the end of a date range but did not find the left parenthesis to indicate the beginning of the range Action Check your input to see if you entered the transaction correctly DCDO029E DCDOO30E DCD0031 DCD Messages UNPAIRED LEFT PARENTHESIS WITHIN STATEMENT nnnnnnnnnnnnnnnn TRANS REJECTED Reason CA Dispatch has found a left parenthesis indicating the beginning of a date range but did not find the right parenthesis to indicate the end of
112. JJJJJJJ Jobname of the entry that was updated DDD DDD Descriptive text about the update For example a report being deleted out of the RIDF produces this message 08 18 2010 06 25 26 DC900606 User USERNO1 Panel VOPMI820 Updated RIDF Queue RPI TESTRPT TESTJOB1 DELETED For example a report being put on HOLD through the RIDF produces this message 08 18 2010 06 25 26 DC900606 User USERNO1 Panel VOPMI820 Updated RIDF Queue ARCH TESTRPT TESTJOB1 HELD Action None User UUUUUUUU Panel PPPPPPPP NNNNNN Task TTTTT Reason Someone started or ended one of the subtasks from the online system UUUUUUUU User name PPPPPPPP Panel name NNNNNN Started or Ended TIIT Name of the task started or ended RPI RPO ARCHIVE EXTRACT DIST STAT For example a user starting the RPI task produces this message 08 18 2010 06 25 26 DC900607 User USERNO1 Panel VOPMI100 STARED Task RPI Action None Chapter 5 DC Messages 297 DC Messages DC900608 DC900620 298 Message Guide Reason A report was processed by RPI under the undefined report definition as defined on the report processed Action None PC Binary Download Invalid Data Length Reason A record to be downloaded to the PC during a binary transfer has an invalid record length This is an internal logic error Action Contact Technical Support Dc900621 DC900622 DC Messages represents one of the following messages Program
113. LX waiting for SAPI initialization Please check the CADZSAPx Address Space status SPLx is the CADDSPL ID CADZSAPx is the SAPI JCL procedure name Reason The CADDSPL main address space is waiting for the full initialization of the SAPI address space This message warns the operator about a possible error Action Check the CADZSAPx SYSOUTs and determine the cause of the delay If the address space is waiting for any resources supply the required resources If the address space has ended correct the reason indicated in the CADZSAPx SYSOUTs Contact Technical Support for further assistance SPLX unable to perform DIV Identify SPLx is the CADDSPL ID Reason The DIV process returns a return code higher than 0 for an IDENTIFY function The CADDSPL ends This message follows CADDO60I that indicates the return and reason code of the DIV IDENTIFY request Action This is an internal error Contact Technical Support SPLx unable to perform DIV Access SPLx is the CADDSPL ID Reason The DIV process returns a return code higher than 0 for an ACCESS function The CADDSPL ends This message follows CADDO6OI that indicates the return and reason code of the DIV ACCESS request Action This is an internal error Contact Technical Support CADDO73E CADDO74E CADDO75E CADDSPL SPLx Append LDS on SPLT root LDS mismatched SPLx is the CADDSPL ID Reason The number of appended LDS found in the SPLTABL does not agree with
114. OSE IMMED command the report opened by the intercept is orphaned because no more tasks are associated with it This report is closed and marked for recovery The report is specified by the CADDO84I and CADD0851 messages Action This may be normal when for example the address space creating this report is no longer available If this error occurs frequently contact Technical Support SPLx deallocate enforced for closed report SPLx is the CADDSPL ID Reason When shutting down an intercept by a STOP IMMED QUIESCE IMMED or CLOSE IMMED command the report is closed by the intercept The report is deallocated The report is specified by the CADDO84I and CADDO85I messages Action This may be normal when for example the address space creating this report is no longer available If this error occurs frequently contact Technical Support Chapter 1 CADDSPL Messages 19 CADDSPL CADDO48W CADDO51 E 20 Message Guide SPLx report will be rerouted to JES spool SPLx is the CADDSPL ID Reason When shutting down an intercept by a STOP QUIESCE or CLOSE command with the IMMEDIAT option there is an active report To honor the IMMEDIAT option the end of this report is rerouted to the JES spool The SAPI task associated with this intercept task consolidates this report The report is specified by the CADD084 and CADDO85 messages Action None This is a normal warning message for all currently intercepted reports duri
115. P RC 8 indicates an invalid parameter list was sent to the LDS access service RC 12 indicates an error from ENFSPL Formmmmm READ RC 8 indicates an invalid parameter list was sent to the LDS access service RC 12 indicates an error from ENFSPL Action This message is preceded by additional error messages from the CA Dispatch LDS I O Manager Save all error information and check those messages for the appropriate action Storage Not Available for pppppppp with Return Code cc Reason A storage request for program pppppppp failed due to an insufficient amount of available IDMS storage Action Restart MSG If the problem persists shutdown the CA Dispatch address spaces and increase the Storage parameter in the CA Dispatch Usergen parameter list Run the Usergen JCL procedure restart CA Dispatch and restart MSG If the problem still persists contact Technical Support DC980601 DC980602 DC980611 DC980612 DC Messages MSG Task Abending with Code cccc Reason The MSG Subtask has abended with the specified code Issued by program CADSMBOO Action Determine if the abend code is listed in the Messages Guide If so attempt to correct the problem and restart the MSG Subtask If the problem persists contact Technical Support MSG Task Abending Current Report rrrrrrrr Job jjjjjjjj Jes nnnnnnnn Reason Specifies the report name job name and JES number of the report being processed a
116. PARM CADDSNT INIT and restart the CAIRIM program see the CA Dispatch Installation Guide for more information CADDSNT initialized for JES3 Reason CA Dispatch is initialized for running in a JES3 environment Action None CADSOO7E CADSOOS8I CADSOO9E CADSO10I CADS Messages DSINIT unable to locate JES subsystem Reason DSOINIT was unable to locate JES address space Action Check for JES2 or JES3 subsystem running and active if the problem persists contact Technical Support CADDSPL Initialization complete Reason The CADDSPL component was successfully initialized Action None CADDSNT initialization format error Reason PARM value of DSINIT initialization module has unexpected values or the format is invalid Action Set up CAIRIM parameters for DSINIT initialization module with appropriate PARM parameters see the Getting Started for details DSINIT Unable to load module module RC rc Reason DSINIT was unable to load module module Action Check that the module whose name appears in the message is accessible from either the STEPLIB or LINKLIST concatenation if the problem persists contact Technical Support Chapter 2 CADS Messages 143 CADS Messages CADSO11E CADSO12E CADSO13E 144 Message Guide DSINIT Module module is invalid Reason A request to delete or reinitialize module module has been issued module is not supposed to be loaded using DSINIT
117. PDATED Reason A download or upload request has been modified Action None nnnnnnnn REQUEST HAS BEEN CREATED Reason A download or upload request has been created Action None NO ARCHIVED ENTRIES FOR THIS REPORT ENTER END Reason The Recipient Archive Retrieval Screen VARMI220 has been requested for a particular report and no reports are available in archive Action Enter END to exit the screen REPORT NOT DEFINED COPY INVALID Reason On the Report Recipient Copy Screen Reports VRDMU135 the From report and job name were entered and not found on the database Action Correct the From report and job name DC900266 DC900267 DC900268 DC Messages RECIPIENT NOT DEFINED TO THIS REPORT COPY INVALID Reason On the Report Recipient Copy Screen Reports VRDMU135 the From report recipient was entered and not found on the database Action Correct the From report recipient COPY FIELDS NOT VALID WITHOUT ADD COMMAND Reason On the Report Recipient Copy Screen Reports VRDMU135 the ADD command is not present on the command line and is required for the copy function Action Enter ADD on the command line MAILDROP NOT FOUND Reason On the Active Bundle Status Screen VRDMU820 a Locate Maildrop command L XXXXXXXX did not find a matching maildrop Action Enter a valid Maildrop ID for the L xxxxxxxx command Chapter 5 DC Messages 225 DC Mess
118. PORT RECIPIENT RECORD NOT UPDATED SCREEN IS IN ADD MODE Reason While in ADD mode the screen will not modify individual fields for an existing user Action Enter this report recipient screen in normal mode to modify fields REPORT RECIPIENT RECORD NOT ADDED RECIPIENT DOES NOT EXIST Reason The recipient is not on the database therefore the report recipient cannot be added Action Add the recipient or exit the screen Chapter 5 DC Messages 205 DC Messages DC900162 DC900163 DC900164 DC900165 206 Message Guide REPORT RECIPIENT RECORD CANNOT BE ADDED THE BASE REPORT DOES NOT EXIST Reason The report does not exist for the recipient you are trying to add Action Correct the report name and retry the function or first add the report definition REPORT HAS BEEN PRINTED Reason An informational message stating that you have successfully reprinted a report from Online Viewing Action None XXXXXXXX TASK HAS BEEN STARTED BY USER XXXXXXXX Reason A CA Dispatch user has started a task Action No action required XXXXXXXX TASK HAS BEEN ENDED BY USER XXXXXXXX Reason A CA Dispatch user has ended a task Action No action required DC Messages DC900166 DC900167 DC900168 DC900173 A REQUEST FOR EXTERNAL ARCHIVE HAS BEEN PROCESSED Reason A user has issued the S ARCH XT command for archive processing to begin in a region separate from CA Dispatch processin
119. RC cc Reason An error occurred while attempting to allocate a JES output data set for the bundle This message is preceded by DC970020 and DC970023 messages Action Save all error information and contact Technical Support DC980433 DC980439 DC980440 DC980441 DC Messages pppppppp Data Base Error Error Status eeee Reason An RPO Agent foreground program issued a database request which encountered an error Action This message is preceded by messages DC980411 through DC980414 See these messages for appropriate action DJDE User Exit RDFGEX02 Not Found Reason An embedded DJDE was found in the report but the DJDE User Exit could not be loaded Action CA Dispatch is installed with a default RDFGEXO2 This module or a user written version must be placed into the CA Dispatch load library This message is informational only it does not affect the processing of RPO Error Writing xxxxxxx DJDE to Bundle bbbbbbbb Reason An error occurred while writing either a DEFAULT or REPORT DJDE to the specified bundle Action See the message that precedes the DC980440 and take its specified action No Default DJDE Record Defined Sysgen Required Reason Screen VSGMU170 has not been filled in Action Go to the default DJDE screen VSGMU170 and fill in the values Chapter 5 DC Messages 389 DC Messages DC980445 DC980446 DC980447 390 Message Guide ttttttt rrrrrrrr Not Found for
120. RC nnnnn nnnnn is the JES job number which created the report Jobname is the job name that created the report Ddname is the ddname DD statement used to create the report Reason The indicated data set was deleted or purged from the linear data set LDS with the indicated return code This message documents the deletions performed by CADDSPL and appears in the CADDSPL message log Action None File XXXXXXXX Status yy 1st Block 222Z222zZ XXXXXXXX is the token of the control block defining the report yy is the status information flag zzzzzzzz is the token of the first data block for this report Reason Informational For technical support staff use in debugging possible chaining or corruption errors This message appears for every data set that is deleted This message may accompany the CADD250I message in the CADDSPL job log when deleting a data set Action None Chapter 1 CADDSPL Messages 47 CADDSPL CADD252E CADD253W 48 Message Guide File XXXXXXXxX Invalid yyyyyyyy Block zzzzzzzz Status yy XXXXXXXX is the token of the control block defining the report yyyyyyyy is First Index Indx2 Data WritD WritX Hdr4 Hdr4W Hdr4s yy is the status information flags zzzzzzzz is the token of the first data block for this report Reason Informational To be used by technical support staff when they are debugging possible chaining errors This message appears when RC 10 occurs for the CADD2501 message
121. REPORT Reason SCHD parm was used but the file SCHDPLAN included a history record used for SCHDLATE Action Rerun the report using the proper scheduling input file SCHEDULE RECORD INVALID IN LATE REPORT HISTORY RECORD IS REQUIRED Reason SCHD parm was specified but the input file SCHDLATE had a scheduled record as used for PLAN SCHDPLAN Action Rerun the report using the proper scheduling input file VOLUME MUST BE RELEASED MANUALLY TMSTVEXT CANNOT BE LOADED Reason TMSTVEXT the CA 1 Tape Management CA 1 program that releases volumes back to the scratch pool for an externally managed tape could not be loaded Action Insure the EDM feature of CA 1 is properly installed JOB JOBNAME FROM SCHEDULE TAPE WAS NOT SCHEDULED TO RUN Reason This job was not scheduled to run by the scheduling system Action None Chapter 6 DCD Messages 423 DCD Messages DCDO0511 DCDOO52E DCDOO053E DCDOO6OI 424 Message Guide RDBTVIEW OV BASE nnn VIEW nnn PAGES nnn RECIP nnn PAGES nnn Reason These values are audit trail record counts for database processing This message is informational only Action None OPEN ERROR IN MODULE XXXXXXXX ON FILE XXXXXXXX Reason Bad return code from OPEN Action Check the other error messages and correct the problem then rerun the job INSUFFICIENT STORAGE AVAILABLE FOR MODULE XXXXXX Reason GETMAIN failed Action In
122. Reas reas Reason Chapter 5 DC Messages 309 DC Messages DC970018 DC970019 310 Message Guide An attempt to delete a report from the LDS failed The following list explains the possible return codes and reasons associated with the failure m Return Code 4 Reason Code 10 SPLHDR2 for the report has been deleted but the report blocks have been abandoned m Return Code 8 Reason Code 2 The report is not found in the data space m Return Code 8 Reason Code 4 The report is open and cannot be deleted m Return Code 8 Reason Code 8 SPLHDR2 for the report cannot be found in the index m Return Code 16 Reason Code 0 CADDSPL is quiesced Log Driver Shutdown Complete Reason CA Dispatch Log Driver Task was shutdown by either a STOPCADS or E DLOG command Action Issue S DLOG to restart Log Driver if needed Log Driver ESTAE Invoked Closing Log Files Reason CA Dispatch Log Driver Task or CA Dispatch address space is abending Action If CA Dispatch Log Driver Task abended restart with an S DLOG command If CA Dispatch address space abended restart it In either case save all abend information and contact Technical Support DC970020 DC970021 DC970022 DC Messages Dynamic Allocation Error RC rrr Error eeee Info iiii Reason An error occurred in program CADSJSAL while attempting to allocate or deallocate a JES data set Action Save all error information and contact
123. SAPI command The status of the SAPI address space was manually reset the CADDSPL main address space is able to restart it Action None Chapter 1 CADDSPL Messages 37 CADDSPL CADD125I CADD115W CADD126E 38 Message Guide SPLx Creating CADZSAPx Address Space SPLx is the CADDSPL ID CADZSAPx is the CADDSPL SAPI address space Reason The CADDSPL program is starting the CADDSPL address space that manages the SAPI task Action None Invalid Token found for entry nnnnnnnn expected xxXXxxxxx found ffffffff nnnnnnnn is the entry number in hexadecimal value XXXXXXXX is the expected token of the SPLHDR2 in hexadecimal value SFFFFFF is the hexadecimal value found in the token field Reason During the Startup of CADDSPL checking has detected a wrong token value for a report To preserve the report integrity this entry will not be processed by the current run of CADDSPL A manual operation is required to correct this error Action Contact the Technical Support in order to correct this problem SPLX CADZSAPx Failed to start RC XXXX Reas yyyy SPLx is the CADDSPL ID CADZSAPx is the CADDSPL SAPI address space Xxxx is the hexadecimal value of the return code yyyy is the hexadecimal value of the reason code Reason CADDSPL was not able to start the CADDSPL SAPI address space Action Contact Technical Support CADD128E CADDSPL SPLx unable to perform operation function reason SPLx is the CAD
124. SMF Record Not Written SMF Recovery Error Reason An invalid SMF record was written This is an internal logic error Action Contact Technical Support Reason a An error was received from SMF Action a Contact your system programmer DC970081 Message from scheduler interface Reason A job scheduler interface program encountered an error and passed the indicated text for reference Action Consult the appropriate Error Messages Guide for job scheduler interface 330 Message Guide DC970082 DC970083 DC970084 DC970099 DC Messages Scheduling Interface Module Not Available Reason A job scheduling interface was selected on screen VSGMU110 but the associated interface module was not found Action Have your system s personnel add the module indicated into the CA Dispatch load library Dynamic Output Add Error RC rrr Reason eeee Key iiii Reason An error occurred in program CADSJSDO while attempting to allocate a dynamic OUTPUT request Action Save all error information and contact Technical Support Dynamic Output Delete Error RC rrr Reason eeee Reason An error occurred in program CADSJSDO while attempting to delete a dynamic OUTPUT request Action Save all error information and contact Technical Support File FfFFfFFFFFFFFFFFF EF FFFFFETFFFTTT Reason File name of the file that encountered the dynamic allocation or deallocation error Action See prev
125. SPLx gt is the CADDSPL ID Reason This warning message is sent when the number of captured reports has reached a specified warning threshold Its core purpose is to alert the production team before the MAXDS Maximum Data sets is reached so some preventive action can be taken This threshold can be modified through either the CADDUTIL ROOT statement or the Operator SET command with the MDWarn parameter It is expressed as a percentage of MAXDS Action Delete report entries from CA Dispatch that are no longer needed There are several options available to regain report entry SPLHDR2 space They include m Manually delete report entries SPLHDR2 from CA Dispatch Online Viewing m Execute the Online View Purge utility to automatically delete Online Viewing reports that have exceeded their retention m Perform an Online Viewing Unload DSEXULD DSEXULDL reinitialize the linear data sets specifying a larger MAXDS parameter value and perform an Online Viewing Reload DSEXRLD For specific information regarding the execution of these utilities see the Systems Programmer Guide CADD135S lt SPLx gt CADD140I CADD141I CADD142I CADDSPL m Execute DSEXOVUL to initialize the OV database reinitialize the linear data sets specifying a larger MAXDS and execute DSEXBDE DSEXBDEL to restore Online Viewing reports from Archive For specific information regarding the execution of these utilities see the Systems Programmer Guide
126. SPLx gt is using DIV NOCHECK This setting specifies that the validity checking of the IBM DIV service be bypassed to improve data in virtual performance This provides accurate saves with no extra CPU consumption CADZSPLx is the STCname of the main CADDSPL address space Reason Informational response to the DISPATCH_SPL_DIV_CHECK health check Action None CA Dispatch is not processing new reports or MSGCLASS data Reason CA Dispatch s DISPATCH_ACTIVE_SUBTASK health check found an exception condition due to inactive subtasks Action Detail user response information is contained in the actual DISPATCH_ACTIVE_SUBTASK health check text 462 Message Guide CADHOOS8I CADHOO9E CADHO101 CA Health Check Messages CA Dispatch has at least the minimum subtasks active for processing new reports or MSGCLASS data Reason Informational response to the DISPATCH_ACTIVE_SUBTASK health check Action None lt CADZSPLx gt has detected that ENCrypt ICSF data encryption is enabled but CPACF is not installed on this machine CADZSPLx is the STCname of the main CADDSPL address space Reason CA Dispatch s DISPATCH_SPL_ENCRYPT health check found an exception condition due to the missing encryption hardware Action Detail user response information is contained in the actual DISPATCH_SPL_ENCRYPT health check text lt CADZSPLx gt has detected that ENCrypt ICSF data encryption is enabled This machine h
127. ST lt destination gt HAD BEEN ADDED SPLx is the CADDSPL ID task is the CADDSPL task ID RPI1 RP12 RP13 MSG ARCH class is the JES output class processed by this task destination is the JES output destination processed by this task Reason Informational response to the F SPLx ADD command Action None Chapter 1 CADDSPL Messages 7 CADDSPL CADDOOS8I CADDO11I CADDO121 8 Message Guide lt SPLx gt lt task gt CLASS lt class gt DEST lt destination gt has been deleted SPLx is the CADDSPL ID task is the CADDSPL task ID RPI1 RP12 RP13 MSG ARCH class is the JES output class processed by this task destination is the JES output destination processed by this task Reason Informational response to the F SPLx DEL command Action None lt SPLXx gt now accepting Modify and Stop commands SPLx is the CADDSPL ID Reason Informational response during CADDSPL initialization Action None lt CADDSPLx gt Token passed lt CADZSPLx gt lt SPLx gt PROG CADDSPLZ CADDSPLx is the STCname of the initialization address space CADZSPLx is the STCname of the main CADDSPL address space SPLx is the ID of the CADDSPL used in the Modify and Pause commands Reason Informational message during the CADDSPL initialization Action None CADDO13E CADDO14E CADDO15I CADDSPL lt SPLx gt SPLTABLE SPLCM D at lt xxxxxxxx gt deleted some storage not deleted SPLx is the CADDSPL ID Rea
128. Support User uuuuuuuu CCI Inquiry Error Reason The CA Dispatch CAICCI Transfer Server received an error on a CAICCI Inquiry request on behalf of the specified user Action This message is followed by a DC900572 message indicating the error encountered Re attempt the transfer request If the problem persists save all error information and contact Technical Support User uuuuuuuu CCI Init Error Reason The CA Dispatch CAICCI Transfer Server received an error on a CAICCI Init request on behalf of the specified user Action This message is followed by a DC900572 message indicating the error encountered Re attempt the transfer request If the problem persists save all error information and contact Technical Support Chapter 5 DC Messages 285 DC Messages DC900568 DC900569 DC900570 286 Message Guide User uuuuuuuu CCI Send Error Reason The CA Dispatch CAICCI Transfer Server received an error on a CAICCI Send request on behalf of the specified user Action This message is followed by a DC900572 message indicating the error encountered Re attempt the transfer request If the problem persists save all error information and contact Technical Support User uuuuuuuu CCI Receive Error Reason The CA Dispatch CAICCI Transfer Server received an error on a CAICCI Receive request on behalf of the specified user Action This message is followed by a DC900572 message indicating the error enco
129. Technical Support Dynamic Input Allocation Failed Reason An error occurred in program CADSJSAL while attempting to allocate a JES data set for input Action Restart the abending CA Dispatch task If the problem persists contact Technical Support Dynamic Output Allocation Failed Reason An error occurred in program CADSJSAL while attempting to allocate a JES data set for output Action Restart the abending CA Dispatch task If the problem persists contact Technical Support Chapter 5 DC Messages 311 DC Messages DC970023 DC970024 DC970025 DC970026 312 Message Guide Dynamic Deallocation Failed Reason An error occurred in program CADSJSAL while attempting to deallocate a JES data set Action Restart the abending CA Dispatch task If the problem persists contact Technical Support Invalid JES Destination Encountered bundle id bbbbbbbb Reason An invalid destination was used to allocate a JES data set for the output bundle ID displayed Action The system reattempted the allocation with a blank destination value Correct the invalid destination value Invalid Output Name Encountered bundle id bbbbbbbb Reason An invalid output name was used to allocate a JES data set for the bundle ID displayed Action The system reattempted the allocation with a blank output name value Correct the invalid output name value Invalid SYSOUT Definition Encountered bundle id bbbbbbbb R
130. The DIV Save operation is the process that copies the updated content of a data space to its related Linear Data Set As soon as one of the limits is reached the operation is processed Action None Chapter 1 CADDSPL Messages 111 CADDSPL CADD6731 CADD674I 112 Message Guide lt SPLx gt PreFetch count nnn Prnt limit nnnnnnnn Purge XXXX XXXX SPLx is the CADDSPL ID Reason This message is part of the initialization update of the ROOT LDS Pre fetch count is the number of consecutive pages loaded in the data space when a page fault occurs Prnt Limit determines the number of days a given report can stay in the LDS before it is automatically purged if not processed Purge determines the manner in which purges are managed The first value can be either Asynch or Synch Asynch is defined as purges performed by CADDSPL task control Synch is defined as purges performed by the requestor s task control The second parameter can be Quick or Clean Quick is the default and Clean physically erases all data from the LDS Action None lt SPLx gt Lock Number nnnnnnnn Wait time nnnnnnnn Util Limits 1st nnn 2nd nnn SPLx is the CADDSPL ID Reason This message is part of the initialization update of the ROOT LDS Lock Number is the number of attempts made before going into a wait state Wait time is the amount of time in a wait state before a restart is attempted and expressed in hundredths of a second Util Li
131. The Updated Bit Map is set to On or Off The Updated Bit Map is a 4 KB bit map per data space backed by the LDS Its purpose is to increase the performance of saving virtual storage pages back to the LDS files MAXDS is the maximum number of output data sets or report entries that can be contained within the LDS It is defined at Root LDS initialization through the ROOT command of the CADDUTIL utility Action None Chapter 1 CADDSPL Messages 113 CADDSPL CADD6771 CADD678I CADD679I 114 Message Guide lt SPLx gt ORDER Index nnnnnnnn Fields xxxxxxxx XXXXXXXX SPLx is the CADDSPL ID Reason This message is part of the initialization update of the ROOT LDS Index defines the number of Indexed entries in the sort data space Fields give the sort criteria and up to six fields can be defined Action None lt SPLx gt Active Messages nnn nnn SPLx is the CADDSPL ID Reason This message is part of the initialization update of the ROOT LDS It indicates the optional debugging messages currently active on the system Notice this message is omitted when no optional messages are active Action None UTIL Encrypt xxxx Key Interval nnn PAGEOut nnnn UTIL is the CADDSPL Utility Identification xxxx is the encryption setting either ICSF or Off nnn is the encryption key interval key setting either 1 to 365 nnnn is the PAGEOut value used to control the page out cycle Reason This message is p
132. This message may accompany the CADD250 message in the ENFSPL job log when deleting a data set Action If excessive numbers of CADD250I messages occur with RC 10 obtain the complete log and contact Technical Support File XXXXXXxXxX still opened yy unable to delete it XXXXXXXX is the token of the control block defining the report yy is the status information flags Reason This message displays for every data set open during a delete process Action None CADD254W CADD255E CADDSPL File XXXXXXXX HDR4 yyyyyyyy corrupted at offset 0000 ff ee XXXXXXXX is the token of the control block defining the report yyyyyyyy is the token of the bitmap block oooo is the offset of the byte in error in the bit map ff is the hexadecimal value found for the byte of the bitmap ee is the hexadecimal value expected for the byte of the bitmap Reason One or more bits weree reset in a bit map block These bits specify free data block selection as part of the data block protection Action If this message appears frequently contact Technical Support File nnnn Invalid XXXXXXXX Block zzzzzzzz Status yy nnnn is the report number XXXXXXXX is one of the following values First Index Indx2 Data WritD WritX Hdr4 Hdr4W Hdr4s 2zzzzzzz is the token of the invalid block for this report yy is the status information flag Reason The delete process received an invalid token for the control block defining the
133. URE PROCESS ENDED Reason An error occurred in program CADSARUT while attempting to perform a tape management function Action Review SYSGEN Tape Management selection correct the problem and resubmit the job LDSRPT FAILURE PROCESS ENDED Reason An error occurred in program CADSARUT while attempting to perform a LDS REPORT query function Action Save all error information and contact Technical Support LDSOPEN FAILURE PROCESS ENDED Reason An error occurred in program CADSARUT while attempting to perform a LDS OPEN REPORT function Action Save all error information and contact Technical Support Chapter 6 DCD Messages 429 DCD Messages DCD0078E DCD0079E DCD0080E DCD0081E 430 Message Guide LDSREAD FAILURE PROCESS ENDED Reason An error occurred in program CADSARUT while attempting to perform a LDS READ function Action Save all error information and contact Technical Support LDSCLOSE FAILURE PROCESS ENDED Reason An error occurred in program CADSARUT while attempting to perform a LDS CLOSE function Action Save all error information and contact Technical Support LDSSET FAILURE PROCESS ENDED Reason An error occurred in program CADSARUT while attempting to perform a LDS SET function Action Save all error information and contact Technical Support OBTAIN OF SG ARTAPE RECORD FAILED Reason Executing CADSARUT OUTVOL POOL was specified and
134. VC has not been modified 2 Ifthe SVC has not been changed execute the following JCL members in this order a DSEXPFIX b DSEXQFIX 3 Restart CA Dispatch The CA Dispatch online abends with a U3970 code This is an CA IDMS recursive abend This means that something abended and in the process of cleaning up the abend another abend occurred The U3970 generates a full OS dump of the CA Dispatch region There will be another abend which you can find on your system log or CA Dispatch log With recursive abends this first abend will tell you the cause of the problem If no other abend can be found the dump must be sent The CA Dispatch online abends with a U3981 code Check to see if CAIDMCL is in the system LPA Library It should not be in LPA The only other reason for this abend is if a CA Dispatch program tried to load the module CAIDMCL and could not Chapter 9 Abend and VTAM Error Codes 457 User Abends U3995 U3996 VTAM Error Codes 00560000 00580000 005A0000 458 Message Guide The CA Dispatch online abends with a U3995 code This is an CA IDMS system abend A program check occurred in a system module with R13 set to an invalid value This usually means that a Ocx abend occurred in an IDMS User Exit The only CA IDMS user exit supplied is related to the Security Exit named RDFGEXO6 Back out any changes that you have made to the exit and reevaluate your changes The U3995 abend generates a full OS dump of th
135. XX Broken HDR3 chain Current Given Found XXXXXXXX is the token of the control block defining the report Current is the token of the current data block Given is the token of the actual previous data block Found is the token found in the current block for the previous block Reason An invalid backward chain was found between the data blocks for this report The delete process tries to delete all of the found blocks Action If this message appears frequently contact Technical Support Chapter 1 CADDSPL Messages 51 CADDSPL CADD262E CADD263E 52 Message Guide CADDSPLx JESLIT value is XXXXXX CADDSPLx is the CADDSPL ID XXXXXX is the literal identification of the current JES primary subsystem Reason This message follows the CADDO62E message and specifies the JES level found Action Contact Technical Support HDR3 Chaining error during Specific process between Previous and Current Specific is the current process Previous is the token of the from data block Current is the token of the current data block Reason An invalid forward chain was found between data blocks when accessing a report The Specific process can be m Frst Index The control block for this report Previous refers to that block as first index Current while this one is referring back to another report m Idx to dx When walking down the index chain an index block has been found that is either owned by another report or that
136. XXX is the return code of the Storage function in hexadecimal value Reason The required storage cannot be obtained or released The Storage return code gives more information about the reason Action Increase the REGION parameter on the JCL EXEC statement and rerun the job Neither Batch nor Online Environment selected Reason An LDSROOTx DD card or an INTERFACE parameter card has not been found Action Specify either an LDSROOTx DD card or an INTERFACE parameter to indicate the environment to analyze Chapter 1 CADDSPL Messages 135 CADDSPL CADD919E CADD920W CADD921E 136 Message Guide Both Batch and Online Environment selected Reason LDSROOTx DD card s and INTERFACE parameter card s have been found Action Specify either an LDSROOTx DD card s or INTERFACE parameter s to indicate the environment to analyze but not both lt LDSROOTx gt Open Error rc lt XXXx gt LDSROOTx is the ddname of the Root LDS in the Open process XXXX is the return code of the Open function in hexadecimal value Reason An error occurred during the open process of a Root LDS file The Open return code gives more information about the reason Action Check the Open return code correct the error and rerun the job lt LDSROOTx gt is not a Root LDS file LDSROOTx is the ddname of the Root LDS in the Open process Reason The LDSROOTx DD card does not address a valid Root LDS Action Correct
137. a CAICCI Init request Action This message contains the CAICCI error message text indicating the error encountered Re attempt to end the router with the CADSXCRE task If the problem persists save all error information and contact Technical Support CCI Send Error XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Reason The CA Dispatch CAICCI Router shutdown received an error on a CAICCI Send request Action This message contains the CAICCI error message text indicating the error encountered Re attempt to end the router with the CADSXCRE task If the problem persists save all error information and contact Technical Support Chapter 5 DC Messages 279 DC Messages DC900550 DC900552 DC900553 280 Message Guide CCI Term Error XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Reason The CA Dispatch CAICCI Router shutdown received an error on a CAICCI Term request Action This message contains the CAICCI error message text indicating the error encountered Re attempt to end the router with the CADSXCRE task If the problem persists save all error information and contact Technical Support User uuuuuuuu CCI Session with Client has Timed Out Reason The CA Dispatch CAICCI Transfer Server did not receive a response from the client in the required amount of time Action The session is disconnected Re attempt the transfer request If the problem persists save all error information and contact Technical Support User uuuuuuu
138. active Action Do one of the following m Bring up CA Dispatch then rerun DSEXARC or m Run DSEXARCL Chapter 6 DCD Messages 427 DCD Messages DCDOO70E DCDOO71E DCDO072E DCDO073E 428 Message Guide 0370 DATABASE NOT PRESENT PGM ENDING Reason An attempt is being made to access the database but the database is being used by another job the other job is not allowing access Action Contact Technical Support for instructions about how to find the other job or task that is running DATABASE FUNCTION FAILED PROCESS ENDED Reason An attempt to perform a database function has failed Action Review Error Status output correct the problem and resubmit the job NO INTERFACE RECORDS PROCESS ENDED Reason Program CADSARUT did not receive any VOLSER selection interface records from program CADSARCN Action Review program CADSARCN VOLSER selection criteria correct the problem and resubmit the job DYNAMIC ALLOCATION ERROR PROCESS ENDED Reason An error occurred in program CADSARUT while attempting to allocate or de allocate a tape data set Action Save all error information and contact Technical Support DCDO074E DCDO075E DCDO076E DCDO0077E DCD Messages TAPE I O ERROR PROCESS ENDED Reason An error occurred in program CADSARUT while reading or writing a tape data set Action Save all error information and contact Technical Support ARFGTAPM CALL FAIL
139. ages DC900269 DCc900270 Dc900271 226 Message Guide DUPLICATE REPORT RECIPIENT PRESS ENTER TO CONFIRM OR ENTER CANCEL Reason On the Report Recipient Copy Screen Reports VRDMU135 during the recipient copy function the To recipient being created is also found as a current recipient This is a warning to ensure that creating a duplicate recipient is the desired action Action If you want to create the duplicate recipient press Enter If you do not want to create the duplicate recipient enter CANCEL on the command line ACTION NOT PERFORMED MAIN REGION NOT AVAILABLE Reason While signed on and working on an OLVO region the user has requested a service that will cause an update to be performed on the CA Dispatch main region That region is currently not available Action Repeat the action when the CA Dispatch main region becomes available DATA BASE ERROR RETURN CODE IS NNNN Reason The screen program has received an unexpected return code Action Contact Technical Support DC900272 DC900273 DC900274 DC Messages LOCATE ERROR VALUE MUST BE NUMERIC Reason On Report Recipient Definition Screen Pages VRDMU140 the locate command L nnn was issued The locate value was not numeric Action Correct the locate command L nnn by entering a numeric value USE THE ADD COMMAND OR PF10 TO COPY THE RECIPIENT Reason On the Report Recipient Copy Screen Reports VRDMU135 the
140. allocation routine that precede this message take appropriate action based on those messages m The bundle recovery program will restore from CADDSPL upon startup Start the RPI subtasks after CA Dispatch startup to rebuild the original bundles with new bundle IDs If the problem persists contact Technical Support Chapter 5 DC Messages 323 DC Messages DC970064 DC970065 324 Message Guide Bundle Control File Deallocation Error Reason The bundle recovery program could not deallocate the bundle control file Action m Review the error message s from the dynamic allocation routine that precede this message take appropriate action based on those messages m The bundle recovery program will restore from CADDSPL upon startup Start the RPI subtasks after CA Dispatch startup to rebuild the original bundles with new bundle IDs If the problem persists contact Technical Support Bundle Control File xxxxxx Open Error Reason The bundle recovery program could not open the bundle control file for Input or Output processing Action m Review the error message s from the dynamic allocation routine that precede this message take appropriate action based on those messages m The bundle recovery program will restore from CADDSPL upon startup Start the RPI subtasks after CA Dispatch startup to rebuild the original bundles with new bundle IDs If the problem persists contact Technical Support DC970066
141. am L label 1 value 2 value 3 value 4 value SPLx is the CADDSPL ID or program is CADDSPAI or CADDSPOI label is an internal label value are debugging values Reason Informational For Technical Support use in debugging processes Action None CADD401I CADD4021 CADDSPL SPLx process of name Class class Dest destination Writer writer SPLx is the CADDSPL ID or process is eAlloc UnAlloc Open Reopen or Close name is the ddname of the intercepting process class destination and writer are the characteristics of the intercepting report Reason Informational For Technical Support use in debugging processes Action None SPLx status N jobid ddname T SNT2 ITSK HDR2 R rc SPLx is the CADDSPL ID or status is Crte DArt DAdI or Retr jobid and ddname specify the intercepting report SNT2 ITSK and HDR2 specify various control block IDs rc indicates the return code Reason Informational For Technical Support use in debugging processes Action None Chapter 1 CADDSPL Messages 79 CADDSPL CADD4031 CADD4041I CADD410W 80 Message Guide SPLx PreAlloc of name Class class Dest destination Writer writer SPLx is the CADDSPL ID or name is the ddname of the intercepting process class destination and writer are the characteristics of the intercepting report Reason Informational For Technical Support use in debugging processes Action None SPLx status N jobid d
142. and dump that require review The background portion of the Archive Extract Distribution Status or Security subtask failed This is associated with the message DC980003 There is a prior message and abend that gives the real description of the problem that occurred The log may be needed to determine the problem The background portion of the external Archive or Extract job abended Message DC980030 is associated An OS abend and dump is the real cause of the problem Module RDSTSTRT could not get storage Dynamic input allocation failed Check the accompanying DC980057 message Dynamic output allocation failed Check the accompanying DC980061 message Dynamic allocation failed Check the accompanying DC9800nn message Open failed for a dynamically allocated file Check the accompanying DC9800nn message Module received an invalid request Check the accompanying DC9800nn message Chapter 9 Abend and VTAM Error Codes 455 User Abends U1427 U1430 U1431 U1432 U1434 U3005 456 Message Guide The CA 1 Tape Management external data manager was not found Change the startup JCL The library containing the CA 1 Tape Management load modules must be added to the STEPLIB of the startup JCL A CA Dispatch task abends with this code The CA Dispatch Central Vector Table could not be allocated in the IDMS storage pool See message DC970046 for further information A CA Dispatch task abends with this code CA Dispat
143. and partial copies of the Documentation have been returned to CA or destroyed TO THE EXTENT PERMITTED BY APPLICABLE LAW CA PROVIDES THIS DOCUMENTATION AS IS WITHOUT WARRANTY OF ANY KIND INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT IN NO EVENT WILL CA BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY LOSS OR DAMAGE DIRECT OR INDIRECT FROM THE USE OF THIS DOCUMENTATION INCLUDING WITHOUT LIMITATION LOST PROFITS LOST INVESTMENT BUSINESS INTERRUPTION GOODWILL OR LOST DATA EVEN IF CA IS EXPRESSLY ADVISED IN ADVANCE OF THE POSSIBILITY OF SUCH LOSS OR DAMAGE The use of any software product referenced in the Documentation is governed by the applicable license agreement and such license agreement is not modified in any way by the terms of this notice The manufacturer of this Documentation is CA Provided with Restricted Rights Use duplication or disclosure by the United States Government is subject to the restrictions set forth in FAR Sections 12 212 52 227 14 and 52 227 19 c 1 2 and DFARS Section 252 227 7014 b 3 as applicable or their successors Copyright 2011 CA All rights reserved All trademarks trade names service marks and logos referenced herein belong to their respective companies CA Technologies Product References This document references the following CA Technologies products CA IDMS CA 1 CA Top Secret CA 7
144. and take the appropriate action to archive or delete it UTIL Append LDS ddname removed freezed active Reason This message indicates the successful execution of the Delete Freeze or Reset function Action None UTIL Append LDS ddname removal failed Reason The removal of an Append LDS failed The preceding CADD644W messages indicate the names of the reports with pages allocated to this Append LDS Action See CADD644W message for appropriate actions CADD647W CADD648W CADD6491 CADD650I CADDSPL UTIL Bit Map chaining already in Sequential Interleave mode Reason A request to specify the management mode of the bitmap was rejected because this mode is already active Action None UTIL Append LDS ddname already at the highest limit Reason A request to increase a specific Append LDS was rejected because this LDS is already at its highest limit Action None UTIL Creating Updating Append entry nn for LDS ddname Reason This informational message indicates the update of the LDS entry number nn in the ROOT LDS for the Append LDS ddname Action None UTIL Adding Updating Class Dest information for task Reason This message indicates the update of the task information RPI1 RPI2 RPI3 MSG or ARCH in the ROOT LDS Action None Chapter 1 CADDSPL Messages 105 CADDSPL CADD651I CADD652I1 CADD6531 106 Message Guide UTIL Class Dest informatio
145. annot be loaded user choice Action None REPORT RECIP RECORD HAS DJDE BASE DJDE ADD REJECTED Reason Occurs when adding record Type 7 The REPORT RECIPIENT already has DJDE characteristics A DJDE record cannot be added Action Check the fields and enter the correct values DJDE EXT REC EXISTS FOR THIS REPORT RECIP ADD REJECTED Reason Occurs when adding record Type 8 The REPORT RECIPIENT already has DJDE extension characteristics A DJDE extension record cannot be added Action Check the fields and enter the correct values DJDE EXT REC DOES NOT EXIST FOR THIS REPORT RECIPIENT Reason Occurs when adding record Type 9 The prerequisite DJDE extension record Type 8 is not on the database Action Add the Type 8 record to the database CAGLO21E CAGLO22E CAGLO23E CAGLO24E CAG Messages REPORT BASE REC DOES NOT EXIST FOR THIS PAGE SELECT Reason Occurs when adding record Type 4 The prerequisite BASE REPORT record Type 1 is not on the database Action Add the Type 1 record to the database REPORT BASE REC DOES NOT EXIST FOR THIS DJDE REC Reason Occurs when adding record Type 7 The prerequisite BASE REPORT record Type 1 is not on the database Action Add the Type 1 record to the database REPORT BASE REC DOES NOT EXIST FOR THIS DJDE EXT REC Reason Occurs when adding record Type 8 or 9 The prerequisite BASE REPORT record Type 1 is not on the database Action
146. arameter card for each type Chapter 1 CADDSPL Messages 133 CADDSPL CADD913W CADD914W CADD915W 134 Message Guide Invalid Keyword for Select Exclude parameter Reason The SELECT or EXCLUDE parameter card contains an invalid keyword Action Make sure the value of the keyword is JOBNAME or REPORT Value too long for Select Exclude parameter lt XXXXXXXX gt XXXXXXXX is the value found Reason The SELECT or the EXCLUDE parameter card contains a value that is too long The values specified either on the JOBNAME or on the REPORT keyword can not be longer than 8 characters Action Correct the invalid value All keyword must be alone Reason The INTERFACE card if specified must be the only INTERFACE parameter card Action Correct the invalid value CADD916E CADD917S CADD917E CADD918E CADDSPL Can not locate control block CADDSNT Reason The CADDSNT module cannot be located That module contains the anchor point for the active CADDSPL environments The utility has been started with one or multiple INTERFACE parameter cards while the CAIRIM program did not correctly initialize the CADDSPL anchor point Action Make sure the CADDSPL environments are started before the utility is started Storage Obtain Error for 4Kb Page rc lt XXxxx gt Storage Obtain Error for lt ddname gt rc lt Xxxxx gt ddname is the ddname processing during OPEN or CLOSE function X
147. art of the CADDSPL Utility output displaying the encryption and key interval settings Action None CADD680I CADD682E CADD699E CADDSPL lt SPLX gt SPLx is the CADDSPL ID Reason This message is part of the initialization update of the ROOT LDS It indicates the end of the messages group Action None UTIL Unable to modify Root LDS INIT or ALTER parameter missing Reason The CADDUTIL utility is processing a ROOT command and the INIT or ALTER sub parameter has not been specified Add the INIT sub parameter to the ROOT command when initializing a new ROOT LDS Or add the ALTER sub parameter to the ROOT command when modifying a ROOT LDS Action Verify that the ROOT command specifies either the INIT or ALTER sub parameter UTIL CADDUTIL Empty SYSIN Reason The SYSIN DD file was empty The CADDUTIL utility ended without having processed any command Action Correct your SYSIN and rerun your batch job Chapter 1 CADDSPL Messages 115 CADDSPL CADD701S CADD702E CADD703E 116 Message Guide XXXX Logic error at offset nnnn Xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason An internal logic error occurred during the last command analysis Action Contact Technical Support XXXX Invalid syntax at offset nnnn Xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason A synt
148. as the recommended hardware encryption support to minimize the CPU encryption overhead CADZSPLx is the STCname of the main CADDSPL address space Reason Informational response to the DISPATCH_SPL_ENCRYPT health check Action None Chapter 10 CA Health Check Messages 463 CA Health Check Messages CADHO11E CADHO121 464 Message Guide CA Dispatch has detected that ENCrypt ICSF data encryption is enabled in the VSGMU210 screen but CPACF is not installed on this machine Reason CA Dispatch s DISPATCH_ENCRYPT health check found an exception condition due to the missing encryption hardware Action Detail user response information is contained in the actual DISPATCH_ENCRYPT health check text CA Dispatch has detected Encrypt Y data encryption is enabled This machine has the recommended hardware encryption support to minimize the CPU encryption overhead Reason Informational response to the DISPATCH_ENCRYPT health check Action None
149. ase BASE RECIP RECORD FOR THIS PAGE SELECTION DOES NOT EXIST Reason Occurs when adding record Type 4 The prerequisite RECIPIENT base record Type 2 is not on the database Action Add the Type 2 record to the database REPORT RECIP RECORD FOR THIS PAGE SELECTION DOES NOT EXIST Reason Occurs when adding record Type 5 The prerequisite REPORT RECIPIENT record Type 3 is not on the database Action Add the Type 3 record to the database MAILDROP RECORD TO BE ADDED ALREADY EXISTS Reason Occurs when adding record Type 5 This MAILDROP record already exists on the database Duplicates are not allowed Action Check the field and enter the correct value Chapter 4 CAG Messages 159 CAG Messages CAGLOO9E CAGLO10E CAGLO11E CAGLO12E 160 Message Guide BASE RECIP REC FOR THIS DJDE REC DOES NOT EXIST Reason Occurs when adding record Type 7 The prerequisite RECIPIENT base record Type 2 is not on the database Action Add the Type 2 record to the database REPORT RECIP REC FOR THIS DJDE REC DOES NOT EXIST Reason Occurs when adding record Type 7 The prerequisite REPORT RECIPIENT records Type 3 is not on the database Action Add the Type 3 record to the database BASE RECIP REC FOR THIS DJDE EXT REC DOES NOT EXIST Reason Occurs when adding record Types 8 or 9 The prerequisite RECIPIENT base record Type 2 is not on the database Action Add the Type 2 record to the database
150. atabase set from a database error Action None xx File is Full Reason Indicates that the xx IDMS area is full Action If the file is maintained by a CA Dispatch database maintenance utility then that utility must be executed to delete expired database records If the file is not maintained by a utility one of the database expansion utilities must be executed to enlarge the database area See the CA Dispatch Systems Programmer Guide DC980216 DC980218 DC980219 DC980220 DC Messages RPI Report RRRRRRRR Job JJJJJJJJ Job NNNNNNNNN in Error placed on Hold Reason RPI encountered a recoverable error attempting to process Report RRRRRRRR Job JJJJJJJJ and Job NNNNNNN Action Check the CAILOG for any previously issued messages for additional information Take appropriate action than remove report from hold on the VOPMI200 Screen If the problem persists save all error information and contact Technical Support RPI Closing Logical Bundles Reason As part of shutdown processing RPI is marking all Logical Bundles ready for writing by RPO This is an informational message issued by program CADSIFOO Action No action required RPI Foreground Task Has Ended Due to Error Reason A condition was encountered by RPI and it is terminating itself Program CADSIFOO Action Restart RPI If the problem persists save all information and contact Technical Support RPI Foreground Task Has En
151. atch Utility Task Identification Reason This message is part of the Archive Duplication batch job initialization It indicates that the Archive Duplication batch job is attempting to utilize ICSF encryption but the ICSF task is inactive Action Start ICSF task or set Sysgen Archive Encryption to N CADSARUT INVALID RC FROM CADSARDP Reason Program CADSARUT received a non zero return code from the DUPLICATE process program CADSARDP Action Check the other error messages and correct the problem then rerun the job CADSARUT OUTVOL PARAMETER IN ERROR Reason An invalid parameter was encountered processing OUTVOL cards Action The DUPLICATE process does not support OUTVOL POOL Correct the parameter and rerun the job DCD Messages DCDO0671 DCDOO68E DCDOO69E CADSARUT RAN UNSUCCESSFULLY Reason This is an error message from program CADSARUT to notify you that the Archive Batch Utility did not complete successfully Action Check the other error messages and correct the problem then rerun the job AR FILE FULL ARCH UTILITY ENDING Reason An attempt is being made to add a record to the database and the database area is full Action Contact Technical Support for instructions about how to free the area 0069 STATUS CV NOT PRESENT PGM ENDING Reason An attempt is being made to access the database through the currently running CA Dispatch using program DSEXARC but CA Dispatch is not
152. ation about the reason Action Check the Open return code correct the error and rerun the job Sort completed for Sysid lt SPLx gt rc lt Xxxx gt Sort completed for Root lt LDSx gt rc lt XXXxx gt SPLx is the id of CADDSPL environment LDSx is the id of the LDSROOTx DD Xxxx is the return code of the sort function in hexadecimal value Reason Informational message Action Check the return code If the return code is other than zero see the appropriate Sort documentation Sysld lt SPLx gt Total Entries Processed lt value gt Sysld lt SPLx gt Nbr Entries Free lt value gt CADDSPL CADD928W CADD929I lt LDSROOTx gt Unable to get related Data Set Name LDSROOTx is the ddname of the Root LDS Reason This is an internal error The program was not able to find the DSName of the Root LDS Action Check your DD card If it refers to a valid Root LDS contact Technical Support Processing lt LDSROOTx gt DSName lt DSName gt LDSROOTx is the ddname of the Root LDS DSName is the dsname of the Root LDS Reason Informational Message indicating the DSName of the Root LDS currently in process Action None Chapter 1 CADDSPL Messages 139 Chapter 2 CADS Messages The CA Dispatch agent produces the messages CADSO172E to CADS999E They appear in the CADRAS log but may also be presented in the OM Document Viewer or OM Web Viewer Other CA Dispatch error messages may appear
153. ations Action Enter ADD to add a new definition SHUTDOWN IN PROCESS PROCESS CANNOT CONTINUE Reason CA Dispatch is being shut down you cannot sign on Action No action required MAIN REGION NOT YET INITIALIZED TRY AGAIN LATER Reason You issued a STOPCADS before the CA Dispatch system was fully initialized Action Try STOPCADS again later Chapter 5 DC Messages 199 DC Messages DC900139 DC900140 DCc900141 DC900142 200 Message Guide SHUTDOWN IN PROCESS NO FURTHER PROCESSING CAN OCCUR Reason CA Dispatch is being shut down No more online processing is allowed Action No action required EXIT SCREEN CURRENT REPORT IS UNAVAILABLE FILE xxxxxxxx nnnn Reason Internal logic error Possibly this report was deleted by another user File xxxxxxxx indicates which database file is having a problem and I nnnn is the error status Action Use PF2 PF3 or PF4 to exit the screen YOUR TERMINAL CONFIGURATION IS NOT SUPPORTED Reason Your terminal is not a 3278 mode 2 3 4 or 5 type terminal Action Contact Technical Support ENTER PASSWORD Reason This is a request for information Action Enter a valid password for the user ID that is signed on to the terminal DC900143 DC900144 DCc900145 DC900146 DC Messages INVALID JES COMMAND Reason The JES command entered did not contain TO in the second and third characters Action Retyp
154. ave all error information and contact Technical Support Library IIIIINIIIIIIIINNIIINN Reason ACIF Parm Library name in error Action None Error Opening ACIF JCL Reader File Reason An error occurred while attempting to open the ACIF JCL JES Reader file Most likely the ACIFRDR DD SYSOUT A INTRDR statement is missing from either the CA Dispatch startup JCL or the CA Dispatch External Archive JCL Action Add the statement to the JCL Procedures CADSDISP and CADSXTAR in your CA PROCLIB DC970120 DC970121 DC970122 DC Messages Error Allocating New ACIF Status File Reason An error occurred while attempting to allocate an new ACIF Status file This message is preceded by a DC970033 message Action Rerun the ACIF request If the problem persists save all error information and contact Technical Support Error Allocating ACIF Status File Reason An error occurred while attempting to allocate an existing ACIF Status file This message is preceded by a DC970033 message Action Rerun the ACIF request If the problem persists save all error information and contact Technical Support Error Deallocating ACIF Status File Reason An error occurred while attempting to deallocate an ACIF Status file This message is preceded by a DC970033 message Action Rerun the ACIF request If the problem persists save all error information and contact Technical Support Chapter 5 DC Messages 337 DC
155. ax error occurred during the last command analysis due to a problem on the command line Action Check the syntax command XXXX Premature end of command xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason An end of a command was detected at a place where the command needed an action Action Check the syntax command CADD704E CADD705E CADD706E CADDSPL XXXX Invalid keyword at offset nnnn value Xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason The value at offset nnnn is not a valid keyword for the given command Action Check the command XXXX Error at offset nnnn Parameter value already specified xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason The value parameter at offset value was previously specified in the command Action Check the command XXxX Error at offset nnnn too many operands xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason The parameter at offset nnnn specifies too many operands Action Check the command Chapter 1 CADDSPL Messages 117 CADDSPL CADD707S CADD708S CADD709E 118 Message Guide XXXX Logic error at offset nnnn Missing target field Xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason An internal error occurred during the analysis of a specific parameter Action Contact Technical Support XXXX Logic error at offset n
156. bundle ssss is the error status and rrrrrrrrrrrr is the IDMS database record Action Review the log for any CA IDMS messages that have occurred and take appropriate action based on those messages Refer to the CA IDMS Error Codes Messages volumes for more information BUNDLE REPRINT ERROR OCCURRED CADDSPL Inactive Reason A user attempted to reprint a bundle while the CADDSPL task was inactive Action Start the CADDSPL task and retry the reprint If this error recurs save all error information and contact Technical Support BUNDLE bundleld COULD NOT BE REPRINTED Reason A user has requested that a bundle be printed but some of the reports were unavailable A common reason for getting this error message is when a report associated with this bundle was deleted Action None Chapter 5 DC Messages 303 DC Messages DC900644 DC900690 DC970007 DC970008 304 Message Guide Report already reprinting Rpt reportid Job jobname Reason A user requested that a bundle be reprinted but the report is already reprinting Action None CADDSPL data changed recycle CA Dispatch Reason Client has updated the CADDSPL Option fields Task Suffix or Root LDS DSN on the VSGMU110 Sysgen Control Information Screen In order for the change to take effect you must recycle the CA Dispatch main region Action Re cycle the CA Dispatch main region LDS Record Length Mismatch Reason This is an inte
157. bundles to close Action None Bundle bbbbbbbb for Maildrop mmmmmmmm Released Reason The displayed Bundle for the displayed Maildrop has been closed Action None Please Enter Valid Keyword Reason The SPINOFF task code was entered without specifying a Keyword parameter Action Enter a valid keyword such as MAILDROP a FORMS b DEST1 c DEST2 d CLASS e Invalid Keyword Specified Please Reenter Reason The SPINOFF task code was entered specifying an invalid keyword This message is followed by message DC900457 Action Enter a valid keyword such as MAILDROP a FORMS b DEST1 c DEST2 d CLASS e Syntax SPINOFF MAILDROP a FORMS b DEST1 c DEST2 d CLASS e Reason The SPINOFF task code that was entered specified an invalid keyword This is an informational message displaying valid keyword syntax DC900460 DC900461 DC900462 DC900463 DC Messages Action None TO CONFIRM BUNDLE DELETE PRESS ENTER Reason This message is displayed to confirm that a bundle is about to be deleted from screen VRDMU820 or VRDMI830 Action Press Enter to continue deletion process or press PF2 to cancel it DELETE ENTIRE BUNDLE S PRESS ENTER TO DELETE OR CANCEL Reason This message is displayed to reconfirm that a bundle is about to be deleted from screen VRDMU820 or VRDMI830 Action Press Enter to continue the deletion process or enter CANCEL to cancel it BUNDLE DELETION COMPL
158. by another user Action Press PF2 for CA Dispatch to redisplay the Active Bundles Status screen Bundle Status Task is Active Reason The CA Dispatch Bundle Status Task is successfully started and ready to process Action None DC900431 DC900432 DC900433 DC900434 DATABASE Error Module pppppppp Reason DC Messages An error occurred in the specified database program This message is followed by messages DC900432 through DC900434 Action You can review the log for any CA IDMS messages that have occurred and take appropriate action based on those messages Refer to the CA IDMS Error Codes Messages volumes for more information Contact Technical Support ERROR STATUS xxxx Reason IDMS Error Status value from database error Action None ERROR RECORD XXXXXXXXXXXXXXXX Reason IDMS database record from database error Action None ERROR SET XXXXXXXXXXXXXXXX Reason IDMS database set from database error Action None Chapter 5 DC Messages 255 DC Messages DC900435 DC900436 DC900443 256 Message Guide CADSRLSE STAE Routine Invoked Reason A program exception occurred in the Bundle Status Task program CADSRLSE and its STAE recovery routine was invoked Action Restart the Bundle Status Task If the problem persists save all error information and contact Technical Support Bundle Status Task Shutdown Complete Reason The CA Dispatch
159. canning again It is part of the CADDSPLP debugging message set which is sent when the F SPLx SET MSG 240 command is issued Action None Chapter 1 CADDSPL Messages 45 CADDSPL CADD2431 CADD247I CADD248I 46 Message Guide lt SPLx gt Checking status SPLx is the CADDSPL ID Reason This message indicates the purge subtask is checking whether to scan the report entries to stop scanning them or to wait It is part of the CADDSPLP debugging message set which is sent when the F SPLx SET MSG 240 command is issued Action None lt SPLx gt Error in CADDSCAN Code xxxx SPLx is the CADDSPL ID Reason This message indicates an error during the scanning of the report entries The code specifies the kind of error Action Take a system dump recycle CADDSPL and contact Technical Support lt SPLx gt End of reports scanning SPLx is the CADDSPL ID Reason This message indicates the successful completion of the report entries scanning It is part of the CADDSPLP debugging message set which is sent when the F SPLx SET MSG 240 command is issued Action None CADDSPL CADD249I CADD250I CADD251I lt SPLx gt End of Purge subtask SPLx is the CADDSPL ID Reason This message indicates the completion of the purge subtask It is part of the CADDSPLP debugging message set which is sent when the F SPLx SET MSG 240 command is issued Action None JOBnnnnn lt jobname gt lt DDname gt Purged
160. cccccccccccc is the character representation Reason This message follows the CADD150 message Action None SPLx Diag command SPLT missing SPLx is the CADDSPL ID Reason The CADDSPLT table is missing This is an internal error Action Contact Technical Support CADD1631 CADD173E CADDSPL SPLx Change in ORDER requires a recycle of CADDSPL SPLx is the CADDSPL ID Reason This informational message reminds you that the change you made to the order of the fields will be active after the next recycle of CADDSPL When this message appears the CADD063I message will be displayed twice once for the current field order and again for the next order Action None lt SPLx gt Unformatted Append LDS lt dsname gt SPLx is the CADDSPL ID Reason During the start of CADDSPL an unformatted Append LDS was found The CADDSPL halts the starting process and ends with a return code This situation usually appears following a user error when an Append LDS has been deleted and reallocated without formatting Action This is a severe error with a global impact to the whole environment due to the possibility of lost data Contact Technical Support Chapter 1 CADDSPL Messages 43 CADDSPL CADD184I CADD226I CADD235I 44 Message Guide SPLx Token token Job jobname DDname ddname Ord number SPLx is the CADDSPL ID Token is the token ID associated with the opened report Job is the job name of the opene
161. cess The return code error code and information code indicate the cause of the error message The JES data set file is not processed See Dynamic allocation return code for more information Action Take appropriate action depending on the return code Contact Technical Support if the error persists CADD333W CADD3391 CADDSPL SAPx taskid EOD detected on incorrectly closed sysout X is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason While reading a JES data set the SAPI task found a discrepancy between the number of records processed when EOD was reached and the number in the internal control blocks Messages CADD3301 CADD3601 CADD361 and CADD362I provide useful information to identify the JES data set Note This message is written in the JOBLOG of the SAPI address space and as the last record of the user report Action CADD333W indicates that an unusual condition occurred while the application program was writing the SYSOUT the most common reason is that MVS was not shutdown properly you should make sure that the report data is complete SAPx taskid end of process for X is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason This is an informational message The SAPI task finished processing a JES data set Messages CADD360I CADD361 and CADD3621I associated with previous message CADD330I give the JES data set characteristics Action N
162. ch can only execute on the MVS ESA operating system See message DC970047 for further information A CA Dispatch task abends with this code The CA Dispatch Program Vector Table could not be loaded from the IDMS program pool See message DC970048 for further information A CA Dispatch task abends with this code An invalid record was read from CAIENF This is an internal logic error See message DC970010 for further information A CA Dispatch batch job abends with this code When this abend is encountered check for JCL errors or DD STATEMENTS missing such as CAIJRNL1 CAIJRNL2 and so forth This abend indicates a DMCL error The only way to recover from this situation is to use your offloaded journal tapes and do a rollback using DSEXBRO8 then run the DSEXJFIX job to initialize the current journals For more information see the Rollback section of the Backup Restore and Recovery chapter in the Systems Programmer Guide User Abends U3962 U3963 U3970 U3981 WARMSTART routine failed When starting CA Dispatch the WARMSTART task fails with U3962 abend and the DC203006 UNABLE TO FIND BEGIN OR COMMIT CHECKPOINT FOR ALL ACTIVE RUN UNITS The only way to recover is to use your offloaded journal tapes and do a rollback using DSEXBRO8 Follow the rollback with the DSEXJFIX job to initialize the current journals A CA Dispatch online abends with a U3963 code Take the following steps 1 Verify that the CA Dispatch S
163. chived HH MM_ Time report was originally archived ccc CC Recipient if the reprint type R Selective RNRNRNRN Report name for distribution to use during processing JNINININ Jobname for distribution to use during processing An example a reprint for all recipients without changing report or job name 08 18 2004 04 12 55 DC900601 User SUSERO1 Panel VARMI200 Reprint Arch TESTRPT SUSERQ1A P DATE 07 26 2005 TIME 16 06 An example that obtains a reprint for a specific recipient and changes the report name and job name 08 18 2004 04 13 10 DC900601 User SUSERO1 Panel VARMI200 Reprint Arch TESTRPT SUSERQ1A R DATE 07 26 2005 TIME 16 06 KEVIN SMITH DEFDTEST DEFDJOB1 Action None Chapter 5 DC Messages 293 DC Messages DCc900602 294 Message Guide User UUUUUUUU Panel VOVMI330 Reprint OLV RRRRRRR JJJJJJJJ CCCC CCC T PPPPPPPP Reason An Online Viewing reprint has been requested from the Report Route Screen VOVMI110 or from the Online Viewing Print Request Screen VOVMI330 UUUUUUUU User name PPPPPPPP Panel name either VOVMI330 or VOVMI110 RRRRRRRR Report being reprinted JJJJJJJJ Jobname of the report being reprinted T Type of reprint P Printer Printer 0 Orig Rpt Rcp C Orig Rpt Rcp with Class Dest Overrides reprint is from panel VOVMI110 JNINININ Jobname for distribution to use during processing if the reprint is from panel VOVMI110 ccc CCC Recipient if the reprint was fr
164. command issued was not saved in the profile Either issue the EPRO command to save the profile or create a new profile Chapter 5 DC Messages 219 DC Messages DCc900248 DCc900249 DC900253 220 Message Guide PROFILING ONLY SUPPORTED WITH OLV RECIPIENT FUNCTION Reason A profile command was issued from an Online Viewing screen other than the Online Viewing Screen for Report VOVMI320 Action USER and RECIPIENT information is needed to implement profiling it is supported only through the Online Viewing Screen for Report VOVMI320 COMMAND NOT SUPPORTED FOR PROFILING Reason Profile generation does not support all Online Viewing commands Commands not included are LOCATE Print commands and RESET versions of FREEZE and COLUMNS This command is not recorded on the profile Action Enter another command NO PRINTER DEFINITIONS EXIST Reason No printer definitions were entered as part of the PRINTER PRINTER report name job name combination Action If not already done add a definition for report PRINTER job name PRINTER Add site specific printer definitions as recipients owned by this report DC900254 Dc900255 DC Messages PRINTER OVERRIDE NOT ALLOWED Reason The printer name specified is not allowed to be overridden Action To allow overrides access the Sysgen User Definition Screen VSGMU235 and set the Printer ID Override flag to Y RECIPIENT PC RECORD IS MISSING Reason
165. crease the REGION parm on the job statement and rerun the job CADSARUT RAN SUCCESSFULLY Reason This is an informational message from program CADSARUT to notify you that the Archive Batch Utility completed successfully Action None DCDOO61E DCDO062E DCDOO63E DCDOO64E DCD Messages CADSARUT GETMAIN FOR ARUCOMM FAILED Reason An attempt to obtain storage for the Archive Batch Utility common area failed Action Increase the REGION size for the CADSARUT step CADSARUT CANNOT LOAD REQUIRED LMODS Reason An attempt to LOAD the required load modules for the Archive Batch Utility has failed Action Make sure that the CADSLOAD being used contains the following members CADSARCD CADSARDP CADSARDF ARFGTAPM CADSTPAL CADSTPIO CADSTIME CADSLDIO and CADS9SPL CADSARUT INPUT PARAMETER IN ERROR Reason You supplied an invalid EXEC Parameter Action Check your input parm to see if you input the correct parameters Also check to see whether you included the proper delimiters CADSARUT INVALID RC FROM CADSARCD Reason Program CADSARUT received a non zero return code from the CONDENSE process program CADSARCD Action Check the other error messages and correct the problem then rerun the job Chapter 6 DCD Messages 425 DCD Messages DCD00648 DCDOO65E DCDOO66E 426 Message Guide ARDP Invalid return code from SARCPR 12 ICSF Inactive ARDP is the CA Archive Duplication B
166. ction 368 Message Guide DC980120 DC980121 DC980122 DC Messages Enter CLEAR again Storage Not Available for CADSABSQ Reason A storage request for program CADSABSQ failed due to an insufficient amount of available IDMS storage Action Restart Archive If the problem persists shut down the CA Dispatch address spaces and increase the STORAGE parameter in the CA Dispatch Usergen parameter list Run the Usergen JCL procedure restart CA Dispatch and restart Archive If the problem persists contact Technical Support CADSABSQ Error Attaching Foreground Task Reason The CADSAFSQ subtask was not started due to an MVS ATTACH error Action Restart Archive If the problem persists contact Technical Support CADSABSQ Background STAE Routine Invoked Reason A program exception occurred in program CADSABSQ and its STAE recovery routine was invoked Action Restart Archive If the problem persists contact Technical Support Chapter 5 DC Messages 369 DC Messages DC980123 DC980124 DC980130 370 Message Guide CADSAFSQ Task Prematurely Ended Reason Program CADSAFSQ has ended prematurely due to an error condition Action Restart Archive If the error recurs it will be preceded by another error message Save all error information and contact Technical Support Archive Resource Status Process Abend Reason An error occurred attempting to archive AFP resources Action Resta
167. d Reason More than 32 INTERFACE cards have been found in the LDSPARM Action Make sure to not specify more than 32 INTERFACE cards Note INTERFACE can be used for all active CADDSPL in the system Interface lt X gt already selected current one bypassed X is the current Interface id Reason More than one INTERFACE card has been found in the LDSPARM for this ID Action Make sure to not specify more than one INTERFACE card for a given ID Note INTERFACE can be used for all active CADDSPLs in the system CADDSPL CADD910E CADD911E CADD912W Invalid Value on Sort parameter lt XXXXXXXX gt XXXXXXXX is the value found Reason The SORT parameter card contains an invalid value Action Make sure the value or the values on the SORT parameter card are JOBNAME JOBID TOKEN REPORT or SIZE Too many Values on Sort Select Exclude parameter Reason There are too many values on the specified parameter card Action Make sure the number of values is accurate on the parameter card This number is 4 for the Sort parameter and 8 for the Select or Exclude parameter lt text gt already selected current one bypassed text indicate the kind of parameter card It can be Sort parameter m Select Jobname m Select Report m Exclude Jobname m Exclude Report Reason Only one parameter card is allowed for each of the specified types Action Make sure to not specify more than one p
168. d XXXXXXXX Reason On the Subtask Status Screen TS you entered a start command S xxxx Action Enter the proper command in response to the message DC900279 Dc900281 DC900282 DC Messages XXXXXXXX Reason On the Subtask Status Screen TS you entered an end command E xxxx Action Enter the proper command in response to the message MODULE RDSTPRNT DOWNLOAD REQUEST WITH DBKEY dddddddd NOT FOUND Reason An automated download transfer request was processed but was not found when attempting to add it to the history generation list The request was probably deleted before the STATUS task was started Action None SELECTED MSGCLASS IS CURRENTLY ACTIVE CANNOT BE DELETED Reason An attempt was made to delete a MSGCLASS report on screen VOVMI200 while the MSG subtask was currently processing it Action Attempt the deletion at a later time Chapter 5 DC Messages 229 DC Messages DC900283 DC900284 DC900290 230 Message Guide ERROR OCCURRED DELETING BUNDLE S Reason The CA Dispatch Active Bundle process was unable to delete a Logical Bundle because of an error condition Action View the CA Dispatch log files for any supporting error messages If there are no other error messages or the actions for those error messages do not resolve the problem save all error information and contact Technical Support ERROR OCCURRED DELETING BUNDLE REPORTS S Reason The
169. d Action Make sure to not specify more than one time the same LDSROOTx DD card in the JCL 130 Message Guide CADD903S CADD904E CADD905I CADD906W CADDSPL LDSPRT DD card missing or Open Error Process interrupted Reason Either the required LDSPRT DD card has not been found in the JCL or an error occurred during the OPEN process Action Make sure to specify the LDSPRT DD card in the JCL this one must address either a SYSOUT file or an output file with a RECFM of VBA and a LRECL of 157 SYSOUT DD card missing Reason The required LDSPRT DD card has not been found in the JCL Action Make sure to specify the LDSPRT DD card in the JCL this one must address a SYSOUT file lt XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX gt Reason Informational message displaying the parameter card being analyzed Action None Invalid parameter Reason The previously displayed parameter card contains an invalid parameter Action Make sure your card is SORT SELECT EXCLUDE or INTERFACE and suppress any other card Chapter 1 CADDSPL Messages 131 CADDSPL CADD907W CADD908W CADD909W 132 Message Guide Misisng Value on Interface Sort Select Exclude parameter Reason The previously displayed parameter card contains no value Action Correct your parameter card Max Environment selected Interface lt X gt bypassed X is the current Interface i
170. d Codes see page 451 S713 and S613 Abends see page 451 User Abends see page 452 System Abend Codes SA13 SA13 system abend CA IDMS 1369 to ARBGEXTR If the extract task is abending the most likely cause is that the tape that is being requested was scratched Check the Report Retrieval Queue Screen VARMI300 for reference to the tape volume that caused the abend Delete all reprint requests that use this volume To eliminate any further requests for this volume run the job DSEXARD using the VOLSER parameter to delete the volume from the CA Dispatch archive database S713 and S613 Abends 1369 The ARBG ARCH task abended with a 1369 code 1 Enter the Sysgen Control Information Screen VSGMU210 for the archive system and blank out the current tape on the screen or enter CLEAR TAPE from the Enter Next Task Code prompt 2 Go back to the Enter Next Task Code prompt and enter DCMT D AC TA to display active tasks and verify that Archive is not active Then enter S ARCH to start the Archive task Verify that it requests a new scratch tape Chapter 9 Abend and VTAM Error Codes 451 User Abends User Abends D002 005 SHDN SV10 U0003 U0016 452 Message Guide Code D002 cannot be diagnosed directly Examine the preceding message on the console log for the cause of the abend E005 abend occurs when using the CA Dispatch CLIST This abend is a result of an CA IDMS SVC call in error Check t
171. d due to a system abend Action Save all abend information and attempt to fix the problem If the problem persists contact Technical Support Recovery Termination Manager Started Reason The CA Dispatch Recovery Termination Manager subtask was successfully started Action None CA Dispatch Recovery Termination in Progress Reason The CA Dispatch Recovery Termination Manager subtask was invoked due to a system abend Action Save all abend information and attempt to fix the problem If the problem persists contact Technical Support CA Dispatch Recovery Termination Complete Reason The CA Dispatch Recovery Termination Manager subtask has finished processing a system abend Action None Chapter 5 DC Messages 319 DC Messages DC970055 DC970056 DC970057 320 Message Guide Recovery Termination Manager Shutdown Reason The CA Dispatch Recovery Termination Manager subtask has ended successfully Action None Bundle Structure Restore Starting Reason The CA Dispatch bundle recovery program has started the process of determining whether a restore is needed Action None Restoring from Bundle Recovery Dataset Reason The bundle structures are being restored from the bundle recovery data set created by the bundle recovery backup Action None DC970058 DC970059 DC Messages Restoring from CADDSPL Spool Interface Reason Bundle recovery will restore from
172. d report Ddname is the DDname for the opened report Ord is an internal ordinal report number Reason This message is issued in response to a STAT X command or an intercept being stopped CADD184I CADDO84I and CADDO85 messages are written for each opened report Action None lt SPLx gt Task Class Dest Intercept SAPI Initial SPLx is the CADDSPL ID Reason This message is an informational response to the F SPLx STATUS command and gives the columns header for the following CADDO26I message s Action None SPLx nnn Job s is are actively being intercepted SPLx is the CADDSPL ID Reason This message indicates the number of jobs currently intercepted during the intercept shutdown Action None CADD240I CADD241I CADD242I CADDSPL lt SPLx gt Purge subtask is active SPLx is the CADDSPL ID Reason This message indicates the start of the purge subtask It is part of the CADDSPLP debugging message set which is sent when the F SPLx SET MSG 240 command is issued Action None lt SPLx gt Start of reports scanning SPLx is the CADDSPL ID Reason This message indicates the actual scanning of the report entries It is part of the CADDSPLP debugging message set which is sent when the F SPLx SET MSG 240 command is issued Action None lt SPLx gt Waiting for nnnn minutes SPLx is the CADDSPL Identification Reason This message indicates the purge subtask waits for some time before s
173. d the command that you entered INVALID LINE NUMBER LOGIC ERROR IN MODULE nnnnnnnn FOR FIELD nnnnnnnn Reason Internal logic error Action Contact Technical Support Supply the exact message information and the command that you entered DCc900120 Dc900121 DC900122 DC Messages PAGE NOT FOUND BY FOREGROUND MODULE nnnnnnnn ERROR variable text Reason Internal logic error Action Contact Technical Support Supply the exact message information and the command that you entered LOGIC ERROR VDT AREA FILE NOT FOUND FILE nnnnnnnn ERROR nn Reason Internal logic error Action Contact Technical Support Supply the exact message information and the command that you entered LOGIC ERROR INVALID PAGE NUMBER MODULE OVBGMCMD ERROR PAGE 0 Reason Online Viewing users receive this message when invoking the MJ ML and MM line commands for MSGCLASS reports resulting from a REPRINT function Online Viewing Conversion or Online Viewing Unload Reload batch process Action Contact Technical Support Supply the exact message information and the command that you entered Chapter 5 DC Messages 195 DC Messages DC900123 DC900124 DCc900125 DC900126 196 Message Guide NO MSGCLASS DATA TO VIEW Reason There are no MSGCLASS entries in the Online Viewing File or no entries were found for the selection entries Action Verify the selection entries NO PAGES WERE SET ON TO BE PRINTE
174. deallocate an AFP Resource library This message is preceded by a DC970033 message Action See if you can browse the AFP Resource Library online If possible save all error information and contact Technical Support Bundle bbbbbbbb Reason The bundle ID of the bundle in error Action None Library IIIIINIOIIIIIIIIIIIIN NN Reason The AFP resource library name in error Action None DC980456 DC980457 DC980458 DC Messages Resource rrrrrrrr Reason The AFP resource name in error Action None Error Writing AFP rrrrrrr Line to Bundle bbbbbbbb Reason An error occurred while attempting to write the AFP resource to the bundle data set Action This message is preceded by additional error messages Save all error information and contact Technical Support Cleaning Up Resources for Abend Process Reason An error occurred during the writing of a bundle to JES and the RPO Agent task is checking for and cleaning up any resources still held For example file closing and deallocations Action This message is preceded by additional error messages Save all error information and check those messages for the appropriate action Chapter 5 DC Messages 393 DC Messages DC900483 DC980600 394 Message Guide OLV LDS mmmmm Error RC cc mmmmm can be OPEN READ CLOSE or GETRP Reason An error occurred while accessing CADDSPL by Online Viewing For mmmmm GETR
175. ded Reason As part of shutdown processing RPI is terminating cleanly Action No action required This is an informational message only Chapter 5 DC Messages 377 DC Messages DC980221 DC980222 DC980223 378 Message Guide CADS Sysgen Required Use VSGMI100 Screen Reason Information needed to execute the RPI task has not been added to the CA Dispatch database Action Enter online screen VSGMI100 enter the required information and restart RPI pppppppp Data Base Error Error Status eeee Reason An RPI foreground program issued a database request which encountered an error Action Restart RPI If the problem persists save all error information and contact Technical Support Error Accessing LDS RC ccc See DSLOG Reason RPI Program CADSIFO2 encountered an error attempting to retrieve the next available report from CADDSPL The CA Dispatch DSLOG file contains error messages from the LDS I O manager that indicate the actual problem Action Restart RPI If the problem persists save all error information and contact Technical Support DC980225 DC980226 DC980227 DC Messages Reason A report recipient was designated for automated download but no report recipient PC extension record was found by RPI Action Select Option X3 on the VRDMU130 screen for the given report recipient and add the appropriate PC extension data listed on screen VRDMU150 Reason A report was
176. dname T SNT2 ITSK HDR2 R rc SPLx is the CADDSPL ID or status is Prt1 or Prt2 jobid and ddname specify the intercepting report SNT2 ITSK and HDR2 specify various control block IDs rc indicates the return code Reason Informational For Technical Support use in debugging processes Action None DDname report is rerouted to JES spool DDname is the ddname of the intercepted report Reason For any reason stops the intercept of a given report The remaining part of this report is rerouted on the JES spool and processed later by the SAPI task Action None CADD501 CADD502W CADDSPL SPLx taskid Name Token action failed C class D destination RC rr SPLx is the CADDSPL ID taskid is the intercept task associated with the Name Token pair RPI1 RPI2 RPI3 MSG or ARCH action is the requested action delete retrieve adding retrieving class and destination are the characteristics of the intercepting selection rris the return code Reason An IBM name token function ended with a return code Action Contact Technical Support SPLx taskid C class D destination already used by SPLy taskid2 SPLx is the CADDSPL ID taskid is the intercept or SAPI task RPI1 RPI2 RPI3 MSG or ARCH class and destination are the characteristics of the intercepting selection SPLy is the CADDSPL ID taskid2 is the intercept or SAPI task RP1I1 RPI2 RPI3 MSG or ARCH Reason The Class and Destination selectio
177. e Append list Action None UTIL Append LDS ddname not connected to the Root LDS Reason A request to remove an Append LDS was rejected because this one is already out of the Append list Action None UTIL Max Appends reached Append LDS ddname not connected Reason A request to add a new Append LDS was rejected because there is no more space in the Append list Action None Chapter 1 CADDSPL Messages 109 CADDSPL CADD668E CADD669E CADD670I 110 Message Guide UTIL Size of LDS cannot exceed 2 gigabytes Reason While formatting an LDS the utility has detected that it is larger than 2 gigabytes CADDSPL imposes a 2 gigabyte limit per LDS Action Rerun the DDEXLDSI job using a smaller size in the IDCAMS allocation If the IDCAMS allocation is under 2 gigabytes check to see if your site uses a software package or storage class that is allowing the original allocation to be extended lt SPLx gt Unable to edit Root information xxxxxx not accessible SPLx is the CADDSPL ID XXXXXX is either VSArea or SPLHDRD Reason During the initialization or the update of a ROOT LDS by CADDUTIL a control block xxxxxx is no longer accessible This problem prevents sending the messages CADD670I to CADD679I This message indicates an internal problem during the initialization or the update process itself although this process itself has been finished Action Contact your Technical Support
178. e a entries or change it to another identifier INVALID PASTE CRITERIA IDENTIFIER a NOT FOUND IN CUT CRITERIA Reason You specified a Paste criteria identifier a that was not specified in the Cut criteria Action Enter the paste criteria identifier that matches the desired Cut criteria columns Chapter 5 DC Messages 267 DC Messages DC900493 DC900494 DC900500 DC900501 268 Message Guide DEFAULT PROFILES CANNOT BE RENAMED Reason You tried to rename a default profile Action None PROFILES CANNOT BE RENAMED TO A DEFAULT PRINTER ID Reason You tried to rename a profile to a default profile Action None Error Allocating Physical Sequential Report File Reason An error occurred while attempting to allocate a report file for a binary transfer This message will be preceded by a DC970033 message Action Re attempt the transfer request If the error persists save all error information and contact Technical Support Error De allocating Physical Sequential Report File Reason An error occurred while attempting to de allocate a report file for a binary transfer This message will be preceded by a DC970033 message Action Re attempt the transfer request If the error persists save all error information and contact Technical Support DC900502 DC900503 DC900504 DC Messages Error Opening Physical Sequential Report File Reason An error occurred while attempti
179. e CV region If this problem persists contact Technical Support The CA Dispatch online abends with a U3996 code A message was issued which requested the system to abend Review the last message issued before the abend Contact Technical Support for further assistance DCO75110 is displayed at CA Dispatch startup This is a VTAM open return error The APPLID is not defined correctly DC075110 is displayed at CA Dispatch startup This message means duplicate ACB names have been found Check to see if the APPLID is defined twice DCO75110 is displayed at CA Dispatch startup This is a VTAM open return error the APPLID was not found Chapter 10 CA Health Check Messages This chapter lists messages preceded by the characters CADH This section contains the following topics CA Health Check Messages see page 459 CA Health Check Messages These messages are issued by IBM Health Checker for z OS as a result of CA Dispatch s health checks IBM Health Checker for z OS will issue a HZSOOO3E message to indicate a health check exception The HZSO03E major line message is followed by a minor message that includes the CA Dispatch message in the format of CADHnnn The details for the CADHnnnE message are in the health check message buffer and should be viewed using a product that can view these buffers like CA Sysview or IBM Health Checker for z OS The following table shows the mapping of CA Dispatch s health checks to i
180. e Guide CCI INACTIVE PC TRANSFER DISABLED Reason The CCI component of CA Common Services for z OS CCS for z OS is either not installed or inactive Action Either install the CCl component or activate it CCI Router Shutdown for xxxxxxxx is Already Active Reason An attempt has been made to end the CA Dispatch CAICCI Transfer Router CADSXCRT for the specified CA Dispatch VTAM applid however the transfer router shutdown is already active Action None CCI Router Shutdown for xxxxxxxx has Abended Reason The CA Dispatch CAICCI Transfer Router shutdown task CADSXCRE has abnormally terminated for the specified CA Dispatch VTAM applid Action Issue a DCMT D ACTIVE TASKS command at the Enter Next Task Code prompt If the CADSXCRT task is still active attempt the shutdown again If the problem persists save all error information and contact Technical Support DC900547 DC900548 DC900549 DC Messages CCI Inquiry Error XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Reason The CA Dispatch CAICCI Router shutdown received an error on a CAICCI Inquiry request Action This message contains the CAICCI error message text indicating the error encountered Re attempt to end the router with the CADSXCRE task If the problem persists save all error information and contact Technical Support CCI Init Error XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Reason The CA Dispatch CAICCI Router shutdown received an error on
181. e Transfer Router This is an internal logic error Contact Technical Support Action Contact Technical Support Chapter 5 DC Messages 283 DC Messages DC900563 DC900564 284 Message Guide represents one of the following messages User uuuuuuuu User is Already Logged On or User uuuuuuuu User is Not Defined to the System or User uuuuuuuu Invalid Password or User uuuuuuuu The User Id is Blank or User uuuuuuuu Internal Error Processing the Dictionary or User uuuuuuuu Signon Stopped by User Exit or User uuuuuuuu External Security Expired Password or User uuuuuuuu External Security Invalid Password Reason The CA Dispatch CAICCI Transfer Server encountered an error during signon of the specified user Action The error message text is self explanatory Fix the signon problem and re attempt the transfer request If the problem persists save all error information and contact Technical Support User uuuuuuuu Processing Signoff Request Reason The specified user requested signoff from the PC transfer session Action None DC900565 DC900566 DC900567 DC Messages User uuuuuuuu Internal Security Error Reason The CA Dispatch CAICCI Transfer Server encountered an error in one of the CA Dispatch security programs during user signon Action Try the transfer request again If the problem persists save all error information and contact Technical
182. e correct map or dialog name is not being returned from CA Dispatch to the CA Dispatch agent running in the CA DRAS address space Action Check to make sure that all of the appropriate dialogs and maps associated with CA Dispatch Cooperative Processing have been installed correctly in the CA Dispatch main region Unable to load program program name Reason The CA Dispatch agent is attempting to load a program and it cannot be found Action Check the load libraries that are specified in the STEPLIB statement of the CA DRAS job and make sure that the proper load modules are included Enter Next Task Code not located Reason Requested interface to CA Dispatch cannot be accomplished prior to user signon Action Check for other errors in the CA DRAS logs and CAILOG This is likely an internal problem contact Technical Support CADSO0203E CADSO0204E CADSO0204E CADSO205E CADS Messages Invalid request from DRAS Agent Reason An invalid SQL command was passed to the CA Dispatch agent Action Check for other errors in the CA DRAS logs It is likely that this is an internal problem Contact Technical Support Internal Error No workarea found Reason A working storage area was not correctly passed to module CADSQXCV Action If this problem persists contact Technical Support Internal Error Dialog abort Reason Requested interface to CA Dispatch cannot be accomplished Action Check
183. e data space Messages CADD360I CADD361 and CADD3621I which follow the current message or the previous CADD330 message give more information about the current JES data set Action If this error persists contact Technical Support SAPx taskid Loss of HDR2 token when getting blocs for x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The SAPI task received a JES data set for the recovery process and lost the related token which addresses the file in the data space The recovery for the current JES data set is done in a new file in the data space Messages CADD3601 CADD3611I and CADD3621 which follow the current message or the previous CADD330I message give more information about the current JES data set This is an internal error Action Contact Technical Support Chapter 1 CADDSPL Messages 71 CADDSPL CADD356S CADD357S 72 Message Guide SAPx taskid RBA of Separator XXXXXXXX out of file yyyyyyyy x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH XXXXXXXX s the hexadecimal RBA value yyyyyyyy is the hexadecimal token which addresses the file in the data space Reason The SAPI MSG task received a JES data set for the recovery process and detected the RBA relative byte address of the JES data set separator higher than the high RBA of the file in the data space The recovery for the current JES data set is done in a new file in the data
184. e in either the FROMDATE or TODATE parameters Action Correct the input parameter then resubmit job DCD0127E DCDO0128E DCD0129E DCD Messages Date Invalid Year 0 Reason This error message from program CADSBLDE notifies you that the Batch Extract Request Utility encountered an invalid year date value in either the FROMDATE or TODATE parameters Year must be greater than 0 Action Correct the input parameter then resubmit job Date Invalid Month Greater Than 12 Reason This error message from program CADSBLDE notifies you that the Batch Extract Request Utility encountered an invalid month date value in either the FROMDATE or TODATE parameters Month must be less than or equal to 12 Action Correct the input parameter then resubmit job Date Invalid Day Greater Than 31 Reason This error message from program CADSBLDE notifies you that the Batch Extract Request Utility encountered an invalid day date value in either the FROMDATE or TODATE parameters Day must be less than or equal to 31 Action Correct the input parameter then resubmit job Chapter 6 DCD Messages 437 DCD Messages DCD0130E DCD0131E DCD0132E 438 Message Guide Time Invalid Reason This error message from program CADSBLDE notifies you that the Batch Extract Request Utility encountered a missing or invalid time in either the FROMDATE or TODATE parameters Action Correct the input parameter then res
185. e name 244 Message Guide DC900385 DC900386 DC900388 DC900390 DC Messages PROFILE NAME IS A REQUIRED PARAMETER Reason You specified a SPRO DPRO SWITCH or EXEC without specifying the profile name Action Reenter the command specifying the profile name NO PROFILES ARE DEFINED FOR THE REPORT Reason You entered the LISTPROF command to list all the profiles for the report recipient but none exist Action None OPTION T OR B IS INVALID IN HISTORY MODE Reason Request priority options T and B are only valid for pending request processing Action None M OPTION IS ALREADY SPECIFIED Reason Multiple M Move options were entered on screen VRDMI840 Action Enter only one M option Chapter 5 DC Messages 245 DC Messages DC900391 DC900392 DC900393 DC900394 246 Message Guide B OR A OPTION IS ALREADY SPECIFIED Reason Multiple B or A options or both were entered on screen VRDMI840 Action Enter only one B or A option NO SORT PARAMETERS ARE SPECIFIED PLEASE REENTER Reason The SORT command was entered on screen VRDMI840 without any parameters Action Reenter the SORT command with any combination of REPORT JOB RECIPIENT and PAGES INVALID SORT PARAMETER n PLEASE REENTER Reason The nth sort parameter specified with the SORT command on screen VRDMI840 is invalid Action Reenter the SORT command with any combination of REPORT
186. e specified entities are successfully deleted Action None INVALID PC USER GROUP NAME Reason The PC User Group value cannot be blank Action Enter a valid PC User Group name WARNING PC USER GROUP ALREADY EXISTS PRESS ENTER TO ADD Reason This message is informational only Action None DC900306 DC900307 DC900308 DC900309 DC Messages PC NAME ALREADY EXISTS ON DATA BASE Reason The user requested the transfer of a file using the generations suffix GEN or V but the system default for file generations is set to 0 Action Go to the PC Control Screen VPCMU100 and enter a value greater than zero in the file generations field NO PC USER GROUP DEFINITIONS EXIST Reason No entities have been added yet Action None DUPLICATE PC USER GROUP MUST BELONG TO DIFFERENT GROUP Reason The PC User Group exists in the group name entered Action Enter a different group name PC USER GROUP ALREADY EXISTS WITHIN GROUP Reason The PC User Group cannot be duplicated in a group Action None Chapter 5 DC Messages 233 DC Messages DC900310 DC900312 DC900313 DC900314 234 Message Guide DUPLICATE GROUPS NOT ALLOWED Reason Duplicate PC groups are not allowed Action None PC USER GROUP ADDED TO CURRENT GROUP Reason Addition of lower level PC User Group successful Action None REQUEST DELETION COMPLETE Reason
187. e task If the problem persists save all information and contact Technical Support STATUS Data Base Error Module xxxxxxxx Reason This is the first message indicating an IDMS DB error in the Status task It indicates which module is involved RDSTBNDL RDSTJOBS or RDSTPRNT Action Analyze the IDMS DB error If needed contact Technical Support DC980812 DC980813 DC980814 DC980815 DC Messages Error Status XXXX Reason This is the second message indicating an IDMS DB error in the Status task It indicates the error code Action Analyze the IDMS DB error If needed contact Technical Support Error Record XXXXXXXXXXXXXXXX Reason This is the third message indicating an IDMS DB error in the Status task It indicates which record is in error Action Analyze the IDMS DB error If needed contact Technical Support Error Set XXXXXXXXXXXXXXXX Reason This is the fourth message indicating an IDMS DB error in the Status task It indicates which set is in error Action Analyze the IDMS DB error If needed contact Technical Support RDM DQ File is Full Reason This is the optional fifth message indicating an IDMS DB error in the Status task It indicates an IDMS DB Full condition Action Analyze the IDMS DB error If needed contact Technical Support Chapter 5 DC Messages 405 DC Messages DC980816 DC980820 DC980821 DC980822 406 Message Guide Reason
188. e the command with TO as the second and third characters INVALID STATUS MODE Reason There is an invalid entry in the Mode field Action Review the help text for valid entries press PF1 or enter HELP NO STATUS FOR MODE SELECTED Reason There is no status for the mode you have selected Action No action required PLEASE CORRECT HIGHLIGHTED FIELDS THEY ARE MUTUALLY EXCLUSIVE Reason You can use only one of the two fields entered Action Enter one of the fields Chapter 5 DC Messages 201 DC Messages DC900147 DC900148 202 Message Guide JES COMMAND SUBMITTED Reason You have submitted a JES command Action No action required INVALID CURSOR POSITION FOR PF KEY FUNCTION Reason The cursor must be on a valid data line under the PRI priority heading Action Set your cursor and press the PF key DC900149 DC900150 Dc900151 DC900153 DC Messages NO REPORTS FOR THIS JOB Reason There are no reports associated with this job Action No action required user defined message Reason This is a custom user defined message issued from the security exit RDFGEX06 for the verification process Action Follow user defined procedures EDIT ERROR DETECTED BY USER EXIT UPDATE NOT ALLOWED Reason A verification error as designated by the user in the security exit RDFGEX06 has occurred Action Follow user defined procedures NO MESS
189. eason An invalid parmlist was used to allocate a JES data set for the output bundle ID displayed Action The system reattempted the allocation with a corrected parmlist Correct the value DC970027 DC970028 DC970029 DC970030 DC Messages JES Input I O Error 11111111 22222222 33333333 44444444 Reason An I O Error occurred in CADSJSIO while reading data from a JES data set Action Restart the abending task If the problem persists place the data set in HOLD status and contact Technical Support JES Output I O Error 11111111 22222222 33333333 44444444 Reason An I O Error occurred in CADSJSIO while writing data to a JES data set Action Restart the abending task If the problem persists contact Technical Support Dynamic Allocation Error RC rrr Error eeee Info iiii Reason An error occurred in program CADSTPAL while attempting to allocate or deallocate a tape data set Action Save all error information and contact Technical Support Reason An I O Error occurred in CADSTPIO while reading data from a tape data set Action Restart the abending task If the problem persists contact Technical Support Chapter 5 DC Messages 313 DC Messages DC970031 DC970032 DC970033 DC970034 314 Message Guide Reason An I O Error occurred in CADSTPIO while writing data to a tape data set Action Restart the abending task If the problem persists contact Tec
190. eason codes are described in Appendix A of the IBM publication ICSF Application Programmers Guide SA22 7522 XXXXXXXX is the name of the ICSF service that failed Action Contact CA Technical Support CADDSPL CADDICFO3 ICSF not active Service xxxxxxxx RC nnn Reason nnn Reason XXXXXXXX is the name of the ICSF service that failed ICSF has returned an error code The return and reason codes are described in Appendix A of the IBM publication ICSF Application Programmers Guide SA22 7522 Action Ensure that ICSF is running on the machine where the error occurred CADDICF04 ICSF not installed Service XXXXXXXX Entry nnn Reason XXXXXXXX is the name of the ICSF service that failed CA Dispatch failed to load the above ICSF service Action Contact CA Technical Support CADDICFOS ICSF key not found Key xxxxxxxx Entry nnn Reason XXXXXXXX is the name of the missing key CA Dispatch has requested the above key from the ICSF key store CKDS and it was not found This type of error occurs when the CKDS has been restored to an old version or multiple CKDS data sets are used for the same CA Dispatch database Action Contact CA Technical Support to determine if the key can be recovered and the extent of the data loss CADDICFO6 Invalid entry code nnn Reason An internal error has occurred within CA Dispatch Action Contact CA Technical Support Chapter 1 CADDSPL Messages 91 CADDSPL CADD600I CA
191. ed saturation threshold is lt pct2 gt utilization must remain below lt pct3 gt CADZSPLx is the STCname of the main CADDSPL address space pct1 is the percentage of utilization for the LDS pct2 is the saturation percentage pct3 is the saturation percentage minus 5 Reason CA Dispatch s DISPATCH_SPL_MAX_THRSH health check found an exception condition due to the amount of free space available Action Detail user response information is contained in the actual DISPATCH_SPL_MAX_THRSH health check text lt CADZSPLx gt LDS is lt pct1 gt utilized below the warning threshold of lt pct2 gt lt CADZSPLx gt contains the capacity to process reports and MSGCLASS data CADZSPLx is the STCname of the main CADDSPL address space pct1 is the percentage of utilization for the LDS pct2 is the saturation percentage minus 5 Reason Informational response to the DISPATCH_SPL_MAX_THRSH health check Action None Chapter 10 CA Health Check Messages 461 CA Health Check Messages CADHOO5E CADHOO6I CADHOO7E lt CADZSPLx gt is using DIV CHECK additional overhead is required for this option DIV NOCHECK is recommended CADZSPLx is the STCname of the main CADDSPL address space Reason CA Dispatch s DISPATCH_SPL_DIV_CHECK health check found an exception condition due to the DIV CHECK option Action Detail user response information is contained in the actual DISPATCH_SPL_DIV_CHECK health check text lt CADZ
192. ed during the request for a new 4 KB block Action Contact Technical Support Chapter 1 CADDSPL Messages 127 CADDSPL CADD807S CADD808S CADD810S 128 Message Guide Invalid Current Index token in 1st Index hhhhhhhh for file token tttttttt in Data Request Reason An internal error occurred during the request for a new 4 KB block Action Contact Technical Support Invalid Forward chain in Block hhhhhhhh for file token tttttttt in Index Request hhhhhhhh Reason An internal error occurred during the request for a new 4 KB block Action Contact Technical Support Empty index blocks found XXXXXXXX yyyyyyyy for fil le token tttttttt in Index Request Reason An internal error occurred during the request for a new 4 KB block Action Contact Technical Support CADD811E CADD813E CADD860I CADDSPL LDS is full Reason The LDS is full and cannot free a data block For an intercepted report the remaining part is rerouted on the JES spool and processed later by the SAPI task For a report processed by the SAPI task the report waits until more space is available on the LDS or until a CLOSE command is sent Action Delete or archive any reports not immediately needed to release space in the LDS Invalid Bit Map bloc found at token hhhhhhhh for file token tttttttt Reason An internal error occurred during the request for a new 4 KB block Action Contact Technical Support
193. er UNKNWN Reason The SPINOFF task code was entered specifying valid keywords Action None Maildrop mmmmmmmm Reason The displayed maildrop will be compared against the Active Bundle Queue If a complete match of all entered keywords is successful the bundle will be closed Action None Dest dddddddd dddddddd Reason The displayed destinations will be compared against the Active Bundle Queue If a complete match of all entered keywords is successful the bundle will be closed DC900451 DC900452 DC900453 DC Messages Action None Forms ffffffff Reason The displayed forms will be compared against the Active Bundle Queue If a complete match of all entered keywords is successful the bundle will be closed Action None Class c Reason The displayed class will be compared against the Active Bundle Queue If a complete match of all entered keywords is successful the bundle will be closed Action None nnnnnnnn Bundles Released Reason The displayed number of bundles has been released by the SPINOFF task code Action None No Active Open Bundles Found Reason The Spinoff task found no active bundles to compare user criteria against Action None No Active Open Bundles Match Selection Criteria Chapter 5 DC Messages 259 DC Messages DC900454 DC900455 DC900456 DC900457 260 Message Guide Reason The Spinoff task found no matching active
194. es K L or M The prerequisite RECIPIENT base record Type 2 is not on the database Action Add the Type 2 record to the database REPORT RECIP REC FOR THIS DJDE FREE FORM REC DOES NOT EXIST Reason Occurs when adding record Types K L or M The prerequisite REPORT RECIPIENT record Type 3 is not on the database Action Add the Type 3 record to the database BASE DJDE REC FOR THIS DJDE FREE FORM REC DOES NOT EXIST Reason Occurs when adding record Types K L or M The prerequisite DJDE record Type 7 is not on the database Action Add the Type 7 record to the database CAGLO36E CAGLO37E CAGLO38E CAG Messages DJDE FREE FORM REC EXISTS FOR THIS REPORT RECIP ADD REJECTED Reason Occurs when adding record Type K The REPORT RECIPIENT already has DJDE free form characteristics A DJDE free form record cannot be added Action Check the fields and enter the correct values DJDE FREE FORM REC DOES NOT EXIST FOR THIS REPORT RECIPIENT Reason Occurs when adding record Type L or M The prerequisite DJDE free form record Type K is not on the database Action Add the Type K record to the database REPORT BASE REC DOES NOT EXIST FOR THIS DJDE FREE FORM REC Reason Occurs when adding record Type K L or M The prerequisite BASE REPORT record Type 1 is not on the database Action Add the Type 1 record to the database Chapter 4 CAG Messages 167 Chapter 5 DC Messages DC Messages
195. essage contains the CAICCI error message text indicating the error encountered Restart the transfer router with the CADSXCRS task If the problem persists save all error information and contact Technical Support DC900537 DC900538 DC900539 DC Messages CCI Term Error XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Reason The CA Dispatch CAICCI Transfer Router received an error on a CAICCI Term request Action This message contains the CAICCI error message text indicating the error encountered Restart the transfer router with the CADSXCRS task If the problem persists save all error information and contact Technical Support Invalid CCI Message Id Message Bypassed Reason The CA Dispatch CAICCI Transfer Router received an invalid response message from a PC Action This message is bypassed If message persists end the transfer router with the CADSXCRE task and restart it with the CADSXCRS task If problem persists save the error information contact Technical Support Invalid CCI Service Id Message Bypassed Reason The CA Dispatch CAICCI Transfer Router received an invalid service message from a PC Action This message is bypassed If the message persists end the transfer router with the CADSXCRE task and restart it with the CADSXCRS task If the problem persists save all error information and contact Technical Support Chapter 5 DC Messages 277 DC Messages DC900540 DC900545 DC900546 278 Messag
196. follow the current message or the previous CADD330I message give more information about the current JES data set This is an internal error Action Contact Technical Support SAPx taskid Restart ddn ddname step stepname when processing x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH ddname is the ddname of the current JES data set to recover stepname is the stepname of the current JES data set to recover Reason This is an internal error The SAPI MSG task received a JES data set for the recovery process and detected the recovery RBA addresses a JES data set separator in the data space s file which is for another JES data set of the current job The recovery for the current JES data set is deferred until later Messages CADD360 CADD3611I and CADD362I which follow the current message or the previous CADD330I message give more information about the current JES data set Action Contact Technical Support Chapter 1 CADDSPL Messages 73 CADDSPL CADD360I CADD361I 74 Message Guide SAPx taskid job jobname jobid step stepname x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH jobname is the job name of the current JES data set jobid is the Job ID given by JES stepname is the stepname of the current JES data set Reason This is an informational message associated to the CADD330I message or any error message associated with this current JES data
197. for CA with the start command as follows Rnn 99START EXTR The report extract task ARBGEXTR will be restarted 1 If this message reappears immediately after entering the START command cycle the system by shutting it down DCMT V LTE LISOO2 ON and restarting it If this fails to solve the problem contact Technical Support immediately 2 Ifyou are able to circumvent this problem contact Technical Support at your earliest convenience Note Be sure to print the log file after the system is restarted A REPORT WAS PRINTED FOR THE ABENDED JOB nnnnnnnn Reason A job that produces reports under the control of CA Dispatch has abended Before CA Dispatch was informed of the abend it printed a report from that job Action None Chapter 5 DC Messages 355 DC Messages DC980010 DCc98s0011 DC980025 DC980026 356 Message Guide MODULE nnnnnnnn HAD nnnnnnnn FAILURE WITH ERROR STATUS nn Reason A database error occurred during Bin Bundle processing of STAT Action Take corrective action for the indicated error status You can also review the log for any CA IDMS messages that have occurred and take appropriate action based on those messages Refer to the CA IDMS Error Codes Messages volumes for more information STOPCADS Main Region Shutdown Task Initiated Reason The CA Dispatch shutdown task STOPCADS was successfully initiated Action None user defined message Reason Used by CADSMFOS5 t
198. for other errors in the CA DRAS logs and CAILOG This is likely an internal problem contact Technical Support Invalid signon re enter information Reason The entered password is in the proper format but is not known to the system Action Make sure that a valid password has been keyed in Chapter 2 CADS Messages 151 CADS Messages CADSO222E CADSO222E CADSO301E SECURITY VIOLATION USERID NOT DEFINED Reason The user has not been defined for CA Dispatch recipient based viewing Action Define the user using the VSGMU230 Sysgen User Screen in CA Dispatch SECURITY VIOLATION NO ACCESS FOR RECIP Reason The user has not had recipients defined for the viewing of reports within CA Dispatch Action Define recipients for this user by using the VSGMU235 Sysgen User Recipient Screen within CA Dispatch This will allow the user to view any reports designated for this Recipient ID CADSBINT Error RC cc Reason The CA Dispatch program CADSBINT had an error while trying to load a program necessary to read a report Action Make sure that the full Dispatch load library is included in the STEPLIB statement of the CA DRAS startup JCL Check the CA DRAS JESMSGLG for the following message DCD0102E Unable to Load Program pgmname This message will identify the problem program 152 Message Guide CADSO0302E CADSO303E CADSO304E CADS Messages Invalid function code in CADSQX60 Reason An
199. g JCL has been submitted to start that job running Action No action required A REQUEST FOR EXTERNAL EXTRACT HAS BEEN PROCESSED Reason A user has issued the S EXTR XT command for extract processing to begin in a region separate from CA Dispatch processing JCL has been submitted to start that job running Action No action required XXXXXXXX OPTION IS INVALID FOR REPORT xxxxxxxx JOB XXXXXXXX Reason A CA Dispatch report has the Passthru Record flag set on but has also set options that only apply to printed output Displayed options are ignored Action Correct the options that were set incorrectly AR FILE FULL ARCHIVE SHUTDOWN INITIATED Reason An attempt is being made to add a record to the database and the AR area is full Action For instructions on how to expand the AR area see the Systems Programmer Guide Chapter 5 DC Messages 207 DC Messages DC900174 DC900175 DC900176 DC900177 208 Message Guide OV FILE FULL Reason An attempt is being made to add a record to the database and the OV area is full Action See the Systems Programmer Guide for instructions on how to expand the OV area RDS FILE FULL Reason An attempt is being made to add a record to the database and the RD STAT area is full Action See the Systems Programmer Guide for instructions on how to expand the RD STAT area RDM FILE FULL Reason An attempt is being made to add a record to t
200. h Action Check your input to see if you included the correct delimiters to indicate the end of the fields RANGE OPERAND CONTAINS MORE THAN TWO FIELDS ON STATEMENT nnnnnnnn Reason You input a statement that requires a From and To date range but CA Dispatch read the transaction as having more than two date parameters Action Check your input to see if you supplied only two dates for the range and if you included the proper delimiters to indicate the end of the date fields OPERANDS nnnnnnnn AND nnnnnnnn ARE MUTUALLY EXCLUSIVE FOR STATEMENT nnnnnnnnannnnnnnn Reason You included operands in a statement that cannot be used in the same execution of the statement For example this message displays if you specify both a From and a To date range and a specific Day Action Check your input to see if you included mutually exclusive statements and also check your delimiters Chapter 6 DCD Messages 415 DCD Messages DCDO019E DCDOO020E DCDO021E 416 Message Guide MULTIPLE DATE OPERANDS ARE SUPPLIED FOR STATEMENT nnnnnnnn Reason You input a statement with multiple date operands when only one date operand was required Action Check your input to see if you included mutually exclusive statements and also check your delimiters INVALID FIELD nnnnnnnn WITHIN OPERAND nnnnnnnn WITHIN STATEMENT hnnnnnnnnnnnnnnnn Reason You input a field in this transaction that cannot be used in the specified operand Acti
201. hat has an LRECL greater than 256 The Online Viewing screen system only shows up to 256 columns all data after that column will be truncated Action No action required Page missing or page has no pages Reason The CA Dispatch Online Viewing dialog could not find the page being requested There is probably a problem with the LDS file Action Page past the bad page and continue your processing If valid data is missing save all error information and contact Technical Support INVALID FUNCTION CODE ENTERED MUST BE Y ORN Reason Only Yes and No are valid entries on the screen to print archive or delete a report Action Enter a correct request ALL REQUESTED ACTIONS WERE PERFORMED Reason Insures that the user s request was honored Action No action required Chapter 5 DC Messages 193 DC Messages DC900116 DC900117 DC900118 DC900119 194 Message Guide NO VIEWABLE RECORDS FOR THIS REPORT Reason No records exist on the VSAM Linear data set Action Enter a new OLV request LOGIC ERROR INVALID FUNCTION CODE FOR MODULE nnnnnnnn PROCESSING nnnnnnnn Reason Internal logic error Action Contact Technical Support Supply the exact message information and the command that you entered NO PAGE SAVE AREA FOUND LOGIC ERROR IN MODULE nnnnnnnn FOR FILE nnnnnnnn Reason Internal logic error Action Contact Technical Support Supply the exact message information an
202. hat the Batch Extract Request Utility did not encounter any valid execution parameters Action Supply valid input parameters then resubmit job No FROMDATE Parm Encountered Reason This error message from program CADSBLDE notifies you that the Batch Extract Request Utility encountered a missing or invalid FROMDATE parameter Action Correct the input parameter then resubmit job Chapter 6 DCD Messages 435 DCD Messages DCD0123E DCD0124E DCD0125E DCD0126E 436 Message Guide No TODATE Parm Encountered Reason This error message from program CADSBLDE notifies you that the Batch Extract Request Utility encountered a missing or invalid TODATE parameter Action Correct the input parameter then resubmit job FROMDATE gt TODATE Reason This error message from program CADSBLDE notifies you that the Batch Extract Request Utility encountered a FROMDATE that is greater than the TODATE Action Correct the input parameter then resubmit job Update Switch Invalid Must Be Y or N Reason This error message from program CADSBLDE notifies you that the Batch Extract Request Utility encountered an UPDATE switch not equal to Y or N Action Correct the input parameter then resubmit job Date Invalid Reason This error message from program CADSBLDE or CADSARUL notifies you that either the Batch Extract Request Utility or the Archive Database Merge Utility encountered a missing or invalid dat
203. he SYSCTL data set specified in the CLIST to verify that the correct SVC was used in the Usergen and ensure that the SYSCTL DSN is the same as used in the CA Dispatch online Note You can use the ISPF Browse to look at the SYSCTL file and offset 14 will have the SVC number in hexadecimal format The user is trying to process after the STOPCADS command was issued Wait for the system to shut down and be restarted before trying this command again The security User exit requested a signoff Messages DC980030 and DC980031 are associated The U prefixed user abend codes are listed in numeric order An internal error occurred in Online Viewing database routines Contact Technical Support The foreground portion of Archive Extract Distribution Status Online Viewing or Security detected that the background portion of that subtask has abended The abend from the background portion is the best indication of the error U0042 U0064 U0100 U0107 U0110 U0997 U1301 U1302 User Abends The Initialization of the Archive Extract Distribution Status or Security subtask failed A required module is not available for execution An I O error occurred Message DC900064 is associated Restart the task An 1 0 error occurred Restart the task When using the batch command utility be sure to sign off using the BYE task code or one of its equivalents Input can be delayed or not processed until the BYE command is
204. he batch jobs while CA Dispatch is up and running This status code is a file open error and is caused when the batch job tries to update or delete a record while another task is viewing or adding a record In most cases you can rerun the job and the error does not occur again To prevent a further occurrence of this error run the local version of the batch maintenance procedure which runs with CA Dispatch down Local versions are DSEXLODL DSEXTMIG DSEXVIEW DSEXPURG Review the log for any CA IDMS messages that have occurred and take appropriate action based on those messages Refer to the CA IDMS Error Codes Messages volumes for more information If any other error status codes are encountered contact Technical Support DCDOO36I1 DCDO0037E DCDOO38E DCD Messages NNNNNNNN PROCESS SUCCESSFULLY COMPLETED Reason This message indicates the completion of a requested process in the OVBTUTI1 program Action None BAD RETURN CODE FROM MODULE NNNNNNNN RETURN CODE WAS Reason An error occurred while running the batch utility program Other error messages accompany this message Action Correct your input and resubmit the transaction REPORT JOB NAME ERROR OLV NNNNNNNN OV BASE NNNNNNNN JES NNNNN FILE XXXXXXXX Reason The OLV file Report or Job name did not have a matching OV BASE record All invalid records are backed up and only valid records are restored The report still shows in Online V
205. he bundle recovery program will restore from CADDSPL upon startup Start the RPI subtasks after CA Dispatch startup to rebuild the original bundles with new bundle IDs If the problem persists contact Technical Support Bundle Data File Deallocation Error Reason The Bundle Recovery program could not deallocate the bundle data file Action m Review the error message s from the dynamic allocation routine that precede this message take appropriate action based on those messages m The bundle recovery program will restore from CADDSPL upon startup Start the RPI subtasks after CA Dispatch startup to rebuild the original bundles with new bundle IDs If the problem persists contact Technical Support DC970070 DC970071 DC Messages Bundle Data File xxxxxx Open Error Reason The Bundle Recovery program could not open the bundle data file for Input or Output processing Action m Review the error message s from the dynamic allocation routine that precede this message take appropriate action based on those messages m The bundle recovery program will restore from CADDSPL upon startup Start the RPI subtasks after CA Dispatch startup to rebuild the original bundles with new bundle IDs If the problem persists contact Technical Support Bundle Data File xxxxxx Error Reason The Bundle Recovery program could not read or write to the bundle data file for Input or Output processing Action m Review the
206. he database and the RD MISC area is full Action Contact Technical Support for instructions on how to free the area COMMAND LINE ERROR Reason Invalid entry for the command field Action Reenter a valid command DC900186 DC900187 DC900188 DC Messages SKIP OFFSET AND PREFIX DO NOT FOLLOW XEROX CONVENTIONS Reason Length of PREFIX plus OFFSET is greater than SKIP value Action See your Xerox user manual for maximum values NO RECIPIENTS ARE DEFINED FOR THIS USER ADD OR CANCEL Reason A User ID which has no recipient IDs defined to it was selected from screen VSGMU230 VSGMU235 issues this message Action Add recipient IDs using screen VSGMU235 RECIPIENT DOES NOT EXIST PLEASE RESPECIFY Reason An attempt was made to add a recipient on screen VSGMU235 who has not been defined to the distribution database Action Add the recipient ID using screen VRDMU310 or specify a correct recipient ID Chapter 5 DC Messages 209 DC Messages DC900195 DC900196 DC900197 210 Message Guide REQUESTED PRINT DENIED nnnnn PAGES EXCEEDS LIMIT OF nnnnn Reason System defaults or user limits prevented a reprint request from being done The first number is the size of the report and the second is the limit being used Action Redo the print by page process Either limit the number of pages or request an increase of your limit from your CA Dispatch administrator REQUIRED DATAB
207. he resource group definitions and perform the delete again COLUMN AND CUT PASTE PROCESSING ARE MUTUALLY EXCLUSIVE ENTER CANCEL TO EXIT Reason You tried to enter the cut and paste panel but you already have column suppression or freezing in effect Action Enter CANCEL to exit the screen enter COL RESET to reset column processing then reselect Cut Paste INVALID CUT CRITERIA NO ENDING COLUMN FOUND FOR IDENTIFIER i Reason An identifier i was specified on the cut line but no matching identifier was found to signal the end of the cut string Action Add the identifier i in the column that indicates the end of the cut Chapter 5 DC Messages 263 DC Messages DC900472 DC900473 DC900474 DC900475 264 Message Guide INVALID CUT CRITERIA UNEXPECTED IDENTIFIER i EXPECTED a Reason An identifier i was specified on the cut line but another identifier a was encountered before identifier i had ended Action Add the identifier i in the column that indicates the end of the cut or change the identifier a to i NO LIBRARIES DEFINED FOR THIS LIBRARY GROUP Reason No AFP Resource Library Names exist to be displayed on screen VSGMU255 Action Enter the required information on screen VSGMU255 to add AFP Resource Libraries COPY LIBRARY GROUP DOES NOT EXIST Reason The Copy Library Group entered on screen VSGMU255 does not exist as an AFP Library Group definition Action
208. hnical Support BSAM Tape I O Error volser jobname stepname unit devt ddname operation description block number Reason An I O Error occurred in CADSTPIO while writing data to a tape data set Action Restart the abending task If the problem persists contact Technical Support Dynamic Allocation Error RC rrr Error eeee Info iiii Reason An error occurred in program CADSDSAL while attempting to allocate or deallocate a DASD data set Action Save all error information and contact Technical Support Reason An I O Error occurred in CADSDSIO reading data from a DASD data set Action Restart the abending task If the problem persists contact Technical Support DC970035 DC970036 DC970037 DC970038 DC Messages Reason An I O Error occurred in CADSDSIO while writing data to a DASD data set Action Restart the abending task If the problem persists contact Technical Support Reason An I O Error occurred in CADSFTIO while reading data from a FileTek device Action Restart the abending task If the problem persists contact Technical Support Reason An I O Error occurred in CADSFTIO while writing data to a FileTek device Action Restart the abending task If the problem persists contact Technical Support SG RDCTL Record Not Found Module CADSINIT Reason The CA Dispatch Sysgen control record for Distribution was not found by the CA Dispatch initializa
209. ic or it is out of range Action Check the command XxxX Valuel and value2 mutually exclusive ignored Xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason The values specified are mutually exclusive Action Check the command XXXX Prohibited action value Row Xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason The Row value is prohibited for the Action parameter of the ADD command Action Check the command CADD723W CADD724W CADD725E CADDSPL XXXX Prohibited action value Intercept None for Message task Xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason The message task must have SAPI as an action value Intercept and None are prohibited action values for the message task Action Check the command UTIL Parameter keyword ignored Reason This keyword was ignored in the specific ROOT command Action Check the command XXXX Invalid Task Id All xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason All is an invalid task ID for the ADD and DEL commands Action Check the command Chapter 1 CADDSPL Messages 123 CADDSPL CADD726E CADD727E CADD728E 124 Message Guide XXXX Missing parameter for command ADD SET START STOP Xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason The required parameter or parameters are not present
210. ical Support Error Writing to Physical Sequential Report File Reason An error occurred attempting to write to a report file for archiving AFP resources Action Restart Archive If the error recurs it will be preceded by another error message Save all error information and contact Technical Support Chapter 5 DC Messages 371 DC Messages DC980135 DC980136 DC980137 372 Message Guide File Writer LDS mmmmmm Error RC cc Reason An error occurred for CADDSPL while retrieving a report for archiving AFP resources Action This message is preceded by error messages from the CA Dispatch LDS I O Manager Take the specified action for the preceding message Restart Archive If the error recurs it will be preceded by another error message Save all error information and contact Technical Support File FfFFFFFFFFFFF EEEE EEE fFF Reason The Physical Sequential File name is in error Action None CADSAFSQ ESTAE Recovery Routine Invoked Reason A program exception occurred in program CADSAFSQ and its ESTAE recovery routine was invoked Action Restart Archive If the error persists save all error information and contact Technical Support DC980138 DC980139 DC980140 DC Messages CADSAFSQ ACIF Status File Error Reason Program CADSAFSQ received an error from an ACIF Status File function Action This message is preceded by messages DC970120 through DC970130 Perform the acti
211. id return code from the named module Action Check the other error messages and correct problem and resubmit job Database Error Module XXXXXXXX Reason The named Batch Utility module encountered a Database Error Action Review Error Status output correct problem and resubmit job Invalid XXXXX Command Reason You supplied an invalid or missing SYSIN command parameter Action Check your SYSIN command parameters to see if you input the correct parameters Also check to see whether you included the proper delimiters DCDOOSOI DCDOO91E DCDOO92E DCD Messages XXXX Parameter Missing XXXXXXXXX Assumed Reason The named optional parameter is missing default parameter assumed Action None Invalid Database Function Parameter Reason An attempt to perform a batch utility database function has failed due to an invalid function code Action Save all error information and contact Technical Support Database Not Available Reason An attempt to perform a database function has failed because the database is not available Action Review error status output correct problem and resubmit job Chapter 6 DCD Messages 433 DCD Messages DCDOO93E DCD0104E DCD0105E 434 Message Guide LDS Access Error RC XXX Reason An attempt to perform an LDS Access function has failed You may also receive this message if m The LDS file contains no OLV reports m The LDS Sync
212. ide lt SPLx gt Scanning Sequential Sorted Limit lt nnnnnnnn gt SPLx is the CADDSPL ID Reason An informational message issued in response to the F SPLx startup command This message indicates the process used to scan the whole SPLHDR2 entries m Sequential means the whole SPLHDR2 table is scanned sequentially m Sorted means the sorted data space is scanned for only the allocated entries m Limit indicates the percentage threshold of the defined MAXDS from which a Sequential scanning is enforced Action None lt SPLx gt Release 11 7 Genlevel 0000 ServicePack 00 SPLx is the CADDSPL ID Reason Informational message during the startup of CADDSPL that specifies the maintenance level Action None SPLx CADDSPL initialization in progress SPLx is the CADDSPL ID Reason Informational response during the startup of CADDSPL Action None CADDO31I CADDO32E CADDO33E CADDSPL SPLX CADDSPL INITIALIZATION COMPLETE SPLx is the CADDSPL ID Reason Informational message issued during the startup of CADDSPL Action None SPLx Invalid task specified SPLx specifies the CADDSPL address space Reason This message follows an ADD DELETE FREE START or STOP operator command The command specified an invalid task ID For an ADD command the task ID must be RPI1 RPI2 RPI3 MSG or ARCH For any other commands the task ID must be related to an already defined task Action Correct
213. iewing after the restore but is not viewable The batch VIEW process DSEXVIEW or DSEXPSVW removes the report from Online Viewing JES number file name and record number refer to the OV BASE record which is the report that is deleted Action No action is required however continued database error messages may require corrective action Chapter 6 DCD Messages 421 DCD Messages DCDO00411 DCDO0441 DCDO045E DCDOO46E 422 Message Guide OLVBKUP FILE TOTAL NNNNNNNN BASE NNNNNNNN VIEW NNNNNNNN RECIP NNNNNNNN RPAGES NNNNNNNN OLV NNNNNNNN DSET NNNNNNNN Reason This is an informational message from program OVBTUTI1 it provides database record counts for the backup process The record counts are displayed in the NNNNNNNN variables Action None RDBTVIEW RD JOB NNNN OV BASE OV PAGES NNNN Reason This is an informational message from program CADSVIEW that provides database record counts for each of two program passes Action None ADJUST OPERAND WAS ENTERED MORE THAN ONCE Reason ADJ for the PLAN or LATE report was provided more than once Action Correct input and rerun PLAN or LATE INVALID MINUTES PROVIDED IN ADJUST OPERAND Reason The minutes in the ADJ operand for PLAN or LATE are greater than 59 Action Correct input and rerun PLAN or LATE DCD Messages DCD0047E DCDOO48E DCDO049E DCDOOS5OI SCHEDULE HISTORY FILE RECORD INVALID IN PLAN
214. if all of the required reports for Online Viewing reload currently exist in the Archive database SPLX intercept will resume capturing output SPLx is the CADDSPL ID Reason Informational This is a normal response to the RESUME command Action None CADDO36I CADD037I CADDSPL SPLX xxxxxxxxxx output diverted to the JES spool SPLx is the CADDSPL ID Reason Informational The CADDSPL intercept stops and the output is diverted to the JES spool for one of the following reasons Maximum reached the LDS is full m CADDSPL is down the CADDSPL address space is down m Invalid request the request is invalid This is an internal error m Logic error internal error m Token error internal error Action If the LDS is full you can delete data sets no longer needed using CADispatch r11 or increase the LDS capacity If the CADDSPL address space is down start the CADDSPL address space If there is an internal error contact Technical Support SPLx intercept will quiesce output diverted to the JES spool SPLx is the CADDSPL ID Reason Informational All of the CADDSPL intercepts are stopped and the output diverted to the JES spool due to the QUIESCE command Action None Chapter 1 CADDSPL Messages 17 CADDSPL CADDO38I CADDO39I CADDO41E 18 Message Guide SPLX is quiescing SPLx is the CADDSPL ID Reason Informational All of the CADDSPL s updating tasks as intercepts SAP
215. ility complete rc hhhh Reason The CADDUTIL utility ended The hexadecimal return code hhhh indicates the highest error code encountered during its run Action None UTIL Unable to open Root Append LDS ddname rc hhhh Reason The CADDUTIL utility cannot open the root or append LDS referenced by the ddname The hexadecimal return code hhhh indicates the error code Action Verify that the DD statement referencing this file corresponds to a valid LDS UTIL Init Alter of root append LDS failed rc hhhh Reason The CADDUTIL utility cannot complete the requested function for the LDS referenced by the ddname The hexadecimal return code hhhh indicates the error code of the function Action Verify that the DD statement referencing this file corresponds to a valid LDS CADD613E CADD614E CADD615I CADDSPL UTIL Storage obtain release Error for VSarea Buffer Splhdr rc hhhh Reason The CADDUTIL utility received an error code for a storage obtain or a storage release for a given control block The hexadecimal return code hhhh indicates the error code of the function Action If the error appears for a storage obtain verify the region specified for the CADDUTIL is high enough If needed contact Technical Support UTIL Open Close ShowCB Error for ddname rc hhhh Reason The CADDUTIL utility received an error code for the given operation when processing the LDS named ddname The hexadecimal ret
216. ill active or if the CA Dispatch main region has not ended cleanly Also the CA Dispatch main region can get a 0966 if a local batch job did not complete Note A 0966 abend is a signal that one of the jobs that updates the database has not ended cleanly The first step in correcting the situation is to determine which job did not end cleanly If it was the CA Dispatch main region restart that region The warmstart facility will examine the journals and determine that the database is correct and ready for further updates If it is a local batch job a restore of the affected database files is required before the batch job can be rerun or the CA Dispatch main region can be started 446 Message Guide 2107 2109 Understanding CA IDMS Error Codes with CA Dispatch This abend can occur in the DSEXJNL1 job This is usually caused by a previous execution of this job abending or being canceled The 2107 abend can be prevented by periodically checking the online journal status display DCMT D J and looking for abnormal journals See the Database Maintenance chapter in the CA Dispatch Systems Programmer Guide If an abnormal condition is found immediately shut the system down with a STOPCADS Verify that CA Dispatch came down cleanly Note If CA Dispatch did not come down cleanly and DSEXJFIX is run the result is likely to be a broken chain in the data base Run DSEXJFIX DSEXPFIX and DSEXBRO1 after the system has successfully ended
217. ils with U3962 abend and the DC203006 is displayed This means that information is missing on the current Journal files Action The only way to recover is to use your offloaded journal tapes and do a rollback using DSEXBRO8 Follow the rollback with the DSEXJFIX job to initialize the current journals For more information see the Rollback section of the Backup Restore and Recovery chapter in the Systems Programmer Guide Aborting tasks Reason This message is informational only and might be seen during CA Dispatch shutdown It is normal and no cause for concern Action None DC Messages DC271002 DC466003 DC466014 Aborting task 000000nn Reason This message is informational only and might be seen during CA Dispatch shutdown It is normal and no cause for concern Action None Process module dates do not match Source not displayed Reason The date in the dialog load module does not match the date stored in the MODULE 067 record in the dictionary for this process Therefore the source lines for the abend have not been displayed on the Dialog Abort Information screen Action None Abort occurred in dialog lt dialog name gt process lt process name gt version lt version number gt Reason An error occurred in the lt process name version number gt of dialog lt dialog name gt which caused abnormal termination of the dialog The messages that follow in the print log give additional diag
218. in the CADRAS Region DRAS Log JESLOG These messages may have been passed from CA Dispatch or CADDSPL When an error or warning occurs look in the logs of the CA Dispatch Region CAILOG DSLOG and JESLOG for accompanying messages This section contains the following topics CADS Messages see page 141 CADS Messages CADSOO1E CADSOO2I This chapter lists CADS messages CADDSNT already active Reason A request to initialize the SNT has been issued but it appears that the CADDSNT was already loaded Action Setup CAIRIM parameters for DSINIT initialization module with appropriate PARM parameters see the Getting Started for details SVC LPA Load Unsuccessful Reason The CA Dispatch initialization has failed Action Save the dump and contact Technical Support Chapter 2 CADS Messages 141 CADS Messages CADSOO3I CADSOO4I CADSOO5E CADSOO6I 142 Message Guide SVC Table Load Unsuccessful Reason The CA Dispatch initialization has failed Action Save the dump and contact Technical Support CA Dispatch SVC Initialization Successful Reason The CA Dispatch SVC has been successfully initiated Action None DSINIT cannot locate control block CADDSNT Reason A request to refresh the SNT or to delete or reinitialize a module has been issued but it appears that the CADDSNT has not yet been initialized Action Setup CAIRIM parameters for DSINIT initialization module with
219. ion Action None CANNOT COPY FROM SAME LIBRARY GROUP Reason The AFP Resource Library names from the current Library Group cannot be copied to itself Action Enter a Copy Library Group name that is different than the current Library Group name CANNOT COPY FROM SAME RESOURCE GROUP Reason The AFP Userlib Library names from the current Resource Group cannot be copied to itself Action Enter a Copy Resource Group name that is different than the current Resource Group name OLV LDS vvvvv Error RC cc Reason An error occurred accessing the CADDSPL Interface by Online Viewing Action This message is preceded by error messages from the CA Dispatch LDS I O Manager Take the specified action indicated by the preceding messages DC900484 DC900490 DC900491 DC900492 DC Messages THE REQUESTED FUNCTION IS NOT AVAILABLE Reason You requested the AUTOXFER function that was used for transferring reports to the PC in CA Dispatch Release 5 1 It is no longer available Action None INVALID CUT CRITERIA IDENTIFIER a SPECIFIED MORE THAN ONCE Reason On the Cut Line definition you specified Cut criteria identifier a more than once Action Change the Cut criteria identifier to another value INVALID PASTE CRITERIA IDENTIFIER a SPECIFIED MORE THAN ONCE Reason In the Paste Line criteria you specified Paste criteria identifier a more than once Action Delete one of th
220. iously issued dynamic allocation error messages Chapter 5 DC Messages 331 DC Messages DC970101 DC970102 DC970103 DC970104 332 Message Guide Database Error Module CADSAFDB Reason An error occurred in the specified database program This message is followed by messages DC970102 through DC970104 Action You can also review the log for any CA IDMS messages that have occurred and take appropriate action based on those messages Refer to the CA IDMS Error Codes Messages volumes for more information Contact Technical Support Error Status XXXX Reason This is an IDMS Error Status value from a database error Action None Error Record xXXXXXXXXXXXXXXX Reason This is an IDMS database record from a database error Action None Error Set XXXXXXXXXXXXXXXX Reason This is an IDMS database set from a database error Action None DC970105 DC970106 DC Messages Internal Table Overflow for ACIF JCL Reason The table to build ACIF JCL statements has run past the end Action Contact Technical Support JOBCARD Member Not Found Reason The CA Dispatch ACIF JCL program CADSAFJC cannot find the JOBCARD member in the ACIF Parameter Library that is specified on the Default AFP Resources Screen VSGMU241 Action Add the JOBCARD member to the ACIF Parameter Library This member should contain JCL JOB statements for ACIF JCL execution After adding the member
221. is section contains the following topics Understanding CA IDMS Error Codes with CA Dispatch see page 446 Note For CA IDMS messages not included here see the CA IDMS Error Codes and Messages Guides Volumes 1 2 Chapter 7 IDMS Messages 445 Understanding CA IDMS Error Codes with CA Dispatch Understanding CA IDMS Error Codes with CA Dispatch 0966 Error Status Unable To Ready Area Symptom Error code 0966 is displayed This message indicates that either some other task is currently updating the requested database file or has been interrupted while updating a database file CA IDMS uses a lockout approach to insure that the database files are only updated by one copy of the database software When any piece of database software opens a database file it sets ON a bit in that file called the AREA IN USE lock A 0966 abend occurs when the database software looks to set this bit and discovers that it is already turned on The CA Dispatch main region an CA IDMS central version sets the AREA IN USE bit when it starts All online users and batch jobs that run with CA Dispatch running will update the database through this copy of database software The bit is cleared when the CA Dispatch main region is shut down cleanly A local batch job will also set this bit the CA Dispatch main region must be shut down to allow the local batch job to run The local batch job will get the 0966 abend if the CA Dispatch main region is st
222. issued as a result of the CADDSPL warning about first or second threshold values consider deleting data sets from the SPL through CA Dispatch processing or defining another LDS file to CADDSPL Note that once CADDSPL reaches the first threshold it no longer accepts input reports through the open intercept or the SAPI tasks Chapter 1 CADDSPL Messages 11 CADDSPL CADDO23 1 CADDO24I CADDO25I 12 Message Guide lt SPLx gt Reports processed lt nnnnnnnn gt Captive lt nnnnnnnn gt SPLx is the CADDSPL ID Reason Informational response to the F SPLx STATUS command Reports processed is the number of SYSOUT data sets captured and processed by the CADDSPL since the last startup Data sets Captive is equal to the number of SYSOUT data sets captured processed and retained by the CADDSPL Action None lt SPLx gt Reports open lt nnnnnnnn gt Appended LDS count lt nn gt SPLx is the CADDSPL ID Reason Informational response to the F SPLx STATUS command Shows the number of SYSOUT data sets currently being written by application programs and intercepted by the CADDSPL or processed by the SAPI tasks It also indicates the number of Append LDS Action None lt SPLx gt started at lt hh mmi ss gt on lt yy ddd gt SPLx is the CADDSPL ID Reason Informational response to the F SPLx STATUS command Shows the time and date that this occurrence of the CADDSPL was started Action None CADDSPL
223. it trail in CA Dispatch Every message sent to the DSLOG is saved with a date and time stamp preceding the message User UUUUUUUU Panel PPPPPPPP FFFFFFFF DDD DDD Reason A database update has been made from the online screens UUUUUUUU User name PPPPPPPP Panel name FFFFFFF database function ADDED UPDATED DELETED or EXTRACT DDD DDD descriptive text about the record being updated An example of a message from the Report Base Definition screen 04 08 18 04 12 33 DC900600 User SMIKEO1 Panel VRDMU110 UPDATED REPORT TESTRP An example of a message from the Report Recipient Definition Screen 04 08 18 04 12 33 DC900600 User SMIKEO1 Panel VRDMU130 ADDED REPORT TESTRPT An example of a message from the CA OM Web Viewer Report List Screen when an archived report is requested for viewing 05 07 21 04 12 33 DC900600 User SIELEQ1 Panel DSXARPS EXTRACT REQUEST ISSUED FOR RPT AL JOB SIELEQ1A 07 21 2005 15 05 Action None DCc900601 DC Messages User UUUUUUUU Panel PPPPPPPP Reprint Arch RRRRRRR JJJJJJJJ T DATE MM DD YYYY TIME HH mm CCCCCCCCCCCCCCCC RNRNRNRN JNJNJNJN Reason A reprint from archive has been requested from the online screens UUUUUUUU User name PPPPPPPP Panel name RRRRRRRR Report being reprinted JJJJJJJJ Jobname of the report being reprinted T Type of reprint O OLV P Print all R Print Selective A Arch C Arch new date time MM DD YY Date report was originally ar
224. job termination will automatically delete data space If the problem persists contact Technical Support Chapter 5 DC Messages 343 DC Messages DC970186 DC970187 DC970188 DC970300 344 Message Guide Cannot Find DST for Data Space nnnnnnnn Reason An invalid data space name was passed while attempting to delete the named CA Dispatch data space Action Internal logic error Contact Technical Support Cannot Find DST for Data Space nnnnnnnn Reason An invalid data space name was passed while attempting to allocate or free storage from the named CA Dispatch data space Action Internal logic error Contact Technical Support Storage Violation for Data Space nnnnnnnn at Address aaaaaaaa Reason Internally allocated storage from the named CA Dispatch data space was overwritten Action Internal logic error Contact Technical Support Abend Data for Task tttttttt Reason Name of the CA Dispatch subtask that has abended Action Save all abend information and contact Technical Support DC970301 DC970302 DC970303 DC970304 DC Messages Abend Completion Code is ccccc Reason Abend code for CA Dispatch subtask that has abended Action Save all abend information and contact Technical Support Abending Load Module is IIIIIIII Reason A CA Dispatch subtask program has abended Action Save all abend information and contact Technical Support Abending Progra
225. k is shutting down Action None Chapter 1 CADDSPL Messages 57 CADDSPL CADD3191 CADD320I CADD321I 58 Message Guide SAPX shutdown complete x is the SAPI suffix Reason The SAPI main task completed its shutdown phase Action None SAPX undefined task id nn x is the SAPI suffix nn is the decimal ID number Reason An internal start command was issued for an invalid task ID This is an internal error Action Contact Technical Support SAPx taskid initialization in progress xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The SAPI task started its initialization phase Action None CADD322S CADD323E CADD324I CADDSPL SAPx taskid getmain error for area rc nnn x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH area is SSOB SSS2 or DCB nnn is the decimal return code Reason The getmain for the required control block failed Action Check the return code in the message text for the associated reason and contact Technical Support SAPx taskid initialization failed X is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The SAPI task initialization failed The task is stopped The previous messages give the reasons of the failure Action Check the previous messages for the reasons of this failure and correct them SAPx taskid initialization complete
226. m is pppppppp Reason A CA Dispatch subtask program has abended Action Save all abend information and contact Technical Support Offset of Abend is 00000 Reason Offset of the abend with the abending program Action Save all abend information and contact Technical Support Chapter 5 DC Messages 345 DC Messages DC970305 DC970306 346 Message Guide Abend PSW is pppppppp pppppppp Reason Program Status Word at the time of the abend Action Save all abend information and contact Technical Support Registers at Time of Abend Reason General purpose registers at the time of the abend Action Save all abend information and contact Technical Support DC970307 DC970310 DC Messages represents one of the following messages SVC Dump Successfully Written or Partial SVC Dump Written Dump File Full or No SVC Dump Other SVC Dump in Progress or No SVC Dump Suppressed by Installation or No SVC Dump Suppressed by SLIP NODUMP or No SVC Dump Dump Data Set Not Available or No SVC Dump I O Error in Dump Data Set or No SVC Dump Suppressed by DAE or No SVC Dump SDUMP Failure RC ccc Reason This message indicates the status of the SDUMP macro in program CADSSTAE The various message values are based on return codes from the SDUMP macro Action If the dump is successful offload it to tape and send it to Technical Support for problem determination If the dump was su
227. mand has been requested with the Immed option this requests that the SAPI task be stopped while processing a JES data set The required information will be saved to be able to resume the processing of this JES data set when the SAPI task is restarted Action None SAPx taskid set cancel of timer error rc hhhh x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH hhhh is the return code of the timer function Reason A Timer function got an unexpected error during the standby of a SAPI task Action This is an internal error Contact Technical Support SAPx taskid Data Encryption Failed for Report XXXXXXXX x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH XXXXXXXX is the Report name that was being processed when the data encryption process encountered a problem Reason This message indicates the CADDSPL SAPI Task data encryption process encountered a problem and halted Chapter 1 CADDSPL Messages 77 CADDSPL CADD395E CADD400I 78 Message Guide Action Analyze return reason codes correct problem and restart CADDSPL SAPn RPI1 SARICFO03 ICSF not active x is the SAPI suffix Reason This message is part of the CADDSPL SAPI task initialization It indicates that the CADDSPL SAPI task is attempting to utilize ICSF encryption but the ICSF task is inactive Action Start the ICSF task or set the CADDSPL Encryption parameter to OFF SPLx P progr
228. mation on recipients of a base report but no recipients were defined for the report Action Enter CANCEL 176 Message Guide DC900016 DC900017 DC900018 DC900019 DC Messages S AND E PAGE DEFINITIONS ARE NOT IN PROPER SEQUENCE Reason You defined a sequence of report pages to be printed for a particular recipient through the Report Definition Screen Pages VRDMU140 but the starting and ending definitions are out of sequence Action Check your input and correct the error LABEL PRINT HAS BEEN INITIATED Reason The requested printing of the label will occur as soon as the printer is operable and available Action No action required THIS IS THE LAST RECIPIENT FOR THIS FICHE REPORT Reason You are viewing all recipients of microfiche copies of a base report and are at the end of the recipient list Action No action required RECIPIENT ALREADY EXISTS FOR THIS FICHE REPORT Reason You are attempting to define a recipient of microfiche copies of a base report but microfiche copies have already been assigned for this recipient Action Enter CANCEL Chapter 5 DC Messages 177 DC Messages DC900020 DC900021 DC900022 DC900023 DC900024 178 Message Guide LABEL COULD NOT BE PRINTED DUE TO TERMINAL INACCESSIBLE Reason CA Dispatch attempted to print a label for a bundle or a report but could not access the printer Action No action required TERMINAL NAM
229. ment has been started after CA Dispatch initialization by CAS9 UTIL 4096 bytes starting at RBA hhhhhhhh Reason This message contains the first line of a dump for a 4 KB block in an LDS hhhhhhhh indicates the Relative Block Address of the block Action None CADD6311I UTIL 0000 hhhhhhhh hhhhhhhh hhhhhhhh hhhhhhhh hhhhhhhh hhhhhhhh hhhhhhhh hhhhhhhh scccceeceeceeceececeececcececcecc lt Reason The message displays 32 bytes of a control block or a 4 KB page oooo is the relative offset of the first dumped byte in hexadecimal format hhhhhhhh is the hexadecimal value of the bytes cc cc is the displayable representation of the bytes Action None CADD632I CADD6331 CADD634I CADD635I CADDSPL UTIL XXXX to yyyy All binary zeroes Reason Multiple bytes contain binary zeroes xxxx is the hexadecimal offset of the first byte yyyy is the hexadecimal offset of the last byte This message is received when more than 63 consecutive bytes are binary zeros Action None UTIL All binary zeroes from RBA hhhhhhhh to RBA hhhhhhhh Reason One or multiple 4 KB blocks to be dumped contain binary zero values Action None UTIL RBA range hhhhhhhh to hhhhhhhh out of LDS space Reason Some 4 KB blocks that were requested to be dumped are not contained in the LDS Action None UTIL ddname is unformatted unable to dump it Reason A dump was requested for a ddname which is not a VSAMLDS forma
230. mits defines the warning thresholds for a full data space condition and are expressed in a percentage of the whole data spaces group Action None CADDSPL CADD675I CADD676I lt SPLx gt Max Nbr of Appends Nbr HDR4 Append MaxPag App SPLx is the CADDSPL ID Reason This message is part of the initialization update of the ROOT LDS The values are used to determine the total number of HDR4 blocks bitmap 4 KB blocks needed to estimate the optimum size of this CADDSPL environment Max Nbr of Appends gives the maximum number of appends that a LDS can associate with the Root LDS Nbr HDR4 Append gives the maximum number of HDR4 blocks we can associate with a given Append LDS One HDR4 block is able to address up to 30 848 4 KB Blocks of Appended LDS Action None lt SPLx gt Bit Map xxxxxxxxxxx Updated Bit Map xxx Maxds nnnnnnnn SPLx is the CADDSPL ID Reason This message is issued during the ROOT LDS initialization process Bit Map is either SEQUENTIAL or INTERLEAVED m SEQUENTIAL causes the free page search process to search to the end of the current Append LDS before searching the next appended LDS This method causes reports to cluster on a few very active appended LDS files m INTERLEAVED causes a bit map 4 KB block addressing the next appended LDS to be used when the current Bit Map 4 KB block reaches its end This approach causes reports to be shared among the active appended LDS files
231. mpanying error messages in both the CA Dispatch and RTC logs Reason An error has been found during the PC download process The text in the error message has been returned from the PC through RTC or communications Action If the error text does not clarify the problem check for accompanying error messages in both the CA Dispatch and RTC logs Chapter 5 DC Messages 237 DC Messages DC900348 DC900351 DC900357 238 Message Guide BAD RETURN CODE FROM DSPCVIEW Reason The DSPCVIEW module was called from module DSPCAUTO but returned with a non zero return code An automatic download request could not be processed Action Try the transfer again If that fails sign off CA Dispatch then get back on and try the transfer again If the error persists call Technical Support REPORT JOB DEFINITION DOES NOT EXIST UPLOAD NOT ALLOWED Reason On the PC Upload Request Screen VOVMU360 the report and job are not located on the database The report and job name must be defined to allow PC upload processing Action Correct the report and job name if an error has been made Consult the CA Dispatch Report Administrator if new definitions must be created PC OPTION IS NOT INSTALLED Reason The programs for the report transfer facility cannot be found Action Do not try to run this function until the OM Document Viewer RTC option is installed DC900358 DC900359 DC900360 DC Messages REQUEST BYPASSED yy
232. n criteria for the task taskid in the CADDSPL SPLx environment is used by the task taskid2 in the CADDSPL SPLy environment Only one task can use a specific Class Destination selection criteria Action Verify that the class destination selection criteria specified for a given task is not already in use by another task Chapter 1 CADDSPL Messages 81 CADDSPL CADD503E CADD504E CADD505E 82 Message Guide SPLx taskid already deleted SPLx is the CADDSPL ID taskid is the intercept or SAPI task RPI1 RPI2 RPI3 MSG or ARCH Reason The delete request cannot be processed because the task does not exist Action Verify the identity of the task you want to delete SPLx taskid Unable to action not defined SPLx is the CADDSPL ID taskid is the intercept or SAPI task RPI1 RPI2 RPI3 MSG or ARCH action is the requested action start stop or free Reason The requested action cannot be executed because the specified task is not defined Action Verify the identity of the task you want to execute SPLx taskid Unable to action function not defined SPLx is the CADDSPL ID taskid is the intercept or SAPI task RPI1 RPI2 RPI3 MSG or ARCH action is the requested action start or stop function is the intercept or SAPI task Reason The requested action for the specific function cannot execute because the specified function is not defined for this task Action Verify the identity of the task you want t
233. n stored into ddname Reason The new characteristics for the task referenced in the previous CADD650I message are stored in the ROOT LDS ddname Action None UTIL Removing Class Dest information for task Reason This message indicates the removal of the task information RPI1 RPI2 RPI3 MSG or ARCH in the ROOT LDS Action None UTIL Class Dest information removed from ddname Reason The information for the task referenced in the previous CADD652 message is removed from the ROOT LDS ddname Action None CADD654E CADD655W CADD656I CADDSPL SPLx taskid C class D destination already used by taskid2 SPLx is the CADDSPL ID taskid is the intercept or SAPI task RPI1 RPI2 RPI3 MSG or ARCH class and destination are the characteristics of the intercepting selection taskid2 is the intercept or SAPI task RP1I1 RPI2 RPI3 MSG or ARCH Reason The Class and Destination selection criteria for the task taskid in the CADDSPL SPLx environment is already used by the task taskid2 This checking is made internally in the CADDSPL environment during the ADD command or the ADD statement of the CADDUTIL batch utility Only one task can use a specific Class Destination selection criteria Action Verify that the class destination selection criteria specified for a given task is not already in use by another task UTIL Append LDS ddname already frozen active Reason The freeze or reset function of an A
234. nd MAXCAD values Contact Technical Support if needed SPLx No APPENDed LDS files found at least 1 required SPLx is the CADDSPL ID Reason At least one append LDS is required to run CADDSPL Action Run a CADDUTIL job to add one or multiple append LDS to your root LDS SPLx LDS Datasets in use SPLx is the CADDSPL ID Reason Part of the answer of a STAT X command This message is followed by the LDS messages explanation Action None CADDSPL CADDO81I nn Status LDS name nn is the LDS entry number starting at 00 for the root LDS Status is the status of this entry LDS name is the name of the LDS Reason The message is part of the response to a STAT X command This message is followed by the LDS messages explanation and CADDO67I Status can be one of the following Root LDS Defines the Root LDS Active Defines an active append LDS Adding Defines an append LDS in adding process Deleting Defines an append LDS in deleting process Other Defines a LDS in an unexpected status Free Defines a free slot in the LDS APPEND list The data set name entry will be blank Action None Chapter 1 CADDSPL Messages 29 CADDSPL CADDO82I CADDO831 SPLx SAPIn Job jobname Id Jobid DD DDname Writer Writername SPLx is the CADDSPL ID n is the SAPI identification number Jobname is the job name of the report being processed Jobid is the JES job number of the report being processed Ddname is the ddname of the
235. nformation and exception messages that may appear in the system log CA Dispatch Health Check Exception Msg Information Msg DISPATCH_CADDSPL_ACT CADHOO1E CADHO02I DISPATCH_SPL_MAX_THRSH CADHOO3E CADHO04I DISPATCH SPL_DWW CHECK DISPATCH ACTIVE SUBTASK DISPATCH SPL_ENCRYPT DISPATCH ENCRYPT io The CA Dispatch Health Checks are defined with the suffix of the started task name Each health check is for a specific started task and will report the status of the appropriate task If the CA Dispatch started task name is DISPSYSA then the active subtask health check will be defined as DISPATCH_ACTIVE_SUBTASK DISPSYSA Chapter 10 CA Health Check Messages 459 CA Health Check Messages CADHOO1E CADHOO2I 460 Message Guide The lt CADZSPLx gt must be active for CA Dispatch CADZSPLx is the STCname of the main CADDSPL address space Reason CA Dispatch s DISPATCH_CADDSPL_ACT health check found an exception condition due to the associated CADDSPL task not being active Action Detail user response information is contained in the actual DISPATCH_CADDSPL_ACT health check text lt CADZSPLx gt is active CA Dispatch should be able to properly access reports and MSGCLASS data CADZSPLx is the STCname of the main CADDSPL address space Reason Informational response to the DISPATCH_CADDSPL_ACT health check Action None CA Health Check Messages CADHOO3E CADHOO4I lt CADZSPLx gt LDS is lt pcti gt utiliz
236. ng either 1 to 365 Reason This message is part of the STAT X CADDSPL parameter setting display It indicates encryption and key interval settings Action None SPLX ICSF Encryption Initialization XXXXX SPLx is the CADDSPL ID XXXXX is the encryption setting either Complete or Unsuccessful Reason This message is part of the CADDSPL task initialization It indicates that ICSF encryption is being utilized Action None SPLx close in progress SPLx is the CADDSPL ID Reason The CADDSPL address space is shutting down Action None Chapter 1 CADDSPL Messages 89 CADDSPL CADD5331 CADD541I CADD542E 90 Message Guide SPLx close complete SPLx is the CADDSPL ID Reason The CADDSPL address space is closed Action None ICSF key s generated Be sure to backup ICSF CKDS data set xxxx is the CADDSPL ID SPLx or CADDUTIL ID UTIL Reason New keys have been placed in the ICSF CKDS data set This data set should be backed up as soon as possible Action CA Dispatch has updated encryption keys in the ICSF CKDS data set These keys will be required when encrypting and decrypting report data To insure that these keys are available this data set should be backed up and sent to your disaster recovery site SPLX lt Message Text gt SPLx is the CADDSPL ID CADDICFO2 CSF error Service xxxxxxxx RC nnn Reason nnn Entry nnn Reason ICSF has returned an error code The return and r
237. ng an IMMEDIATE stop of an intercept SPLX cannot locate control block Xxxx SPLx is the CADDSPL ID XxxX is EVT or CADDSNT Reason The CADZSPL address space is starting and the CAS9EVT module or the CADDSNT module cannot be located Action If xxxx EVT determine if CAIENF has been started by issuing the D A ENF command from the console If ENF is not found determine why CAIENF is not active If it can be started do so using the appropriate parameters If xxxx CADDSNT determine if the CAIRIM program has initialized the CA Dispatch environment Correct any error you find and rerun your CAIRIM procedure Note See the Systems Programmer Guide for more information or contact Technical Support CADDO52E CADDO54I CADDSPL Cannot locate appended dataset Reason A data set could not be appended during CADDSPL startup This message is followed by CADDOS55I that indicates the data set name Action Determine if any data set was deleted or uncataloged If this message appears again after taking these actions contact Technical Support The following datasets have been appended Reason This message is followed by a CADDO55 messages that indicates appended data sets Action None Chapter 1 CADDSPL Messages 21 CADDSPL CADDO55I CADDO58E CADDO60I 22 Message Guide Dataset name Dataset name is the name of the data set Reason This message is used to display a data set name It follows
238. ng to open a report file for a binary transfer Action Re attempt the transfer request If the error persists save all error information and contact Technical Support Error Closing Physical Sequential Report File Reason An error occurred while attempting to close a report file for a binary transfer Action Re attempt the transfer request If the error persists save all error information and contact Technical Support Error Writing to Physical Sequential Report File Reason An error occurred while attempting to write to a report file for a binary transfer Action Re attempt the transfer request If the error persists save all error information and contact Technical Support Chapter 5 DC Messages 269 DC Messages DC900505 DC900506 DC900507 270 Message Guide File Writer LDS mmmmmm Error RC cc Reason An error occurred for CADDSPL while retrieving a report for a binary transfer Action This message is preceded by error messages from the CA Dispatch LDS I O Manager Take the specified action for the preceding message Attempt the transfer request again If the error recurs it will be preceded by another error message Save all error information and contact Technical Support File FfF EEEE EEEE fFF Reason Physical Sequential File name in error Action None CADSXFSQ ESTAE Recovery Routine Invoked Reason A program exception occurred in program CADSXFSQ and its ESTAE rec
239. nly DEFAULT PROFILE SESSION STARTED Reason An SPRO DEF command was entered All commands subsequently entered will be recorded in a default profile that will be saved when you enter the EPRO command Action This message is informational only USER PROFILE ADDED Reason An EPRO command was entered All commands are saved in the named profile and can be executed the next time the report is viewed by this user Action This message is informational only DEFAULT PROFILE ADDED Reason An EPRO DEF command was entered All commands are saved in the default profile and will be executed the next time the report is viewed by a user who does not have a profile Action This message is informational only DC900244 Dc900245 DCc900246 DC900247 DC Messages USER PROFILE DELETED Reason A DPRO command was entered The named profile for this user was deleted Action This message is informational only DEFAULT PROFILE DELETED Reason A DPRO DEF command was entered The current default profile was deleted Action This message is informational only LOGIC ERROR IN PROFILE EXECUTION TERMINATED Reason The profile record stored on the database is formatted incorrectly Action Create another profile PROFILE COMMAND LIMIT EXCEEDED LAST COMMAND NOT SAVED Reason The profile record has a 256 byte limit This message is issued when the limit is exceeded Action The most recent
240. nnn Invalid value entry Xxxx is a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason An internal error occurred during the analysis of a specific parameter Action Contact Technical Support XXXX Error at offset nnnn Invalid numeric value xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason A numeric value was found at offset nnnn Action Check the command CADD711 CADD712E CADD713E CADDSPL XXXX Error at offset nnnn Invalid dsname xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason A dsname was found at offset nnnn Action Check the command XXXX Error at offset nnnn Invalid ddname xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason A ddname was found at offset nnnn Action Check the command XXXX Error at offset nnnn no DD card for ddname ddname xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason The ddname specified in the command at offset nnnn does not correspond to a DD statement Action Check the command Chapter 1 CADDSPL Messages 119 CADDSPL CADD714E CADD715E CADD716E 120 Message Guide XXXX Error at offset nnnn Invalid member xxxxis a CADDUTIL ID UTIL or CADDSPL address space ID SPLx Reason A member name was found at offset nnnn Action Check the command XXXX Error at offset nnnn Too long character field xxxxis a CADDUTIL
241. nnn is the number of KB of storage to be allocated for the CA Dispatch work area at system startup 1 Make sure CA Dispatch is down then submit JCL member DSEXUSR1 2 Before bringing CA Dispatch back up increase the region on the startup JCL by the number of KB you increased your storage pool If you increased the size of your XA storage pool the region does not have to be increased An abend occurred due to one of the following situations Either CAIRIM is not installed or you are not at the correct Genlevel of CA Common Services to support LMP You must be at least at Genlevel 9409 This message follows abend message CAI6999E You may also see the chapter LMP Messages in this guide Upgrade CA Common Services to the correct Genlevel Be sure that your LMP key for CA Dispatch is included in the KEYS DD located in the CAS9 procedure Then execute the CASS procedure The attach of the security foreground task failed Message DC900129 is generated Contact Technical Support An abend occurred in the security exit code Message DC900128 is generated Contact your systems programmer U1322 U1369 U1396 U1399 U1409 U1419 U1420 U1421 U1422 U1423 User Abends An abend occurred in the security exit code after entering a password Message DC900128 is generated Contact your systems programmer The foreground portion of the Archive Extract Distribution Status or Security subtask abended There is an OS abend
242. nostic information Action None if prior message DC171017 was issued with RC 14 otherwise contact Technical Support and provide the text of the message Chapter 5 DC Messages 171 DC Messages DC466015 DC900001 DCc900002 172 Message Guide At offset lt hex offset gt source sequence number lt sequence number gt Reason This message is a continuation of message DC466014 above Abnormal termination of the dialog occurred at offset lt hex offset gt into the dialog and at the source sequence number indicated for the process which was named in message DC466014 Additional diagnostic information may follow Action None if prior message DC171017 was issued with RC 14 otherwise contact Technical Support and provide the text of the message Data may have changed since last displayed Press PF2 Reason While you were viewing information on a screen another user may have updated it Action Press PF2 Please correct highlighted fields Reason The question marks that appear on your screen indicate fields with invalid or incomplete entries Action Access the help text for information about correcting these fields Press PF1 to access the help text and then press PF7 to go to the screen with the explanations DC900003 DC900004 DC900005 DC900006 DC Messages Invalid option specified Reason You selected an option on a menu screen that is not available Action Enter the correct
243. not exist for the report and job name in the request Action Add the report base definition to the CA Dispatch report database The report name can be any value The job name must be the same as the PC User ID of the user who will attempt the upload PROGRAM DSPCSOUT ATTACH ERROR or Program CADSXFSQ Attach Error Reason The displayed CA Dispatch subtask was not started due to an MVS ATTACH error Action Attempt to restart the displayed subtask If the problem persists contact Technical Support PROGRAM DSPCSOUT xxxxxxxx or Program CADSXFSQ XXXXXXXX Reason An error occurred in the specified program Action Perform the desired function again If the problem persists contact Technical Support DC900341 DC900342 DC900343 DC900344 DC Messages PC USER xxxxxxxx NO QUEUED REQUESTS Reason An attempt was made to begin the transfer process but no PC requests exist Action None Reason An error has been found during the PC download process The text in the error message has been returned from the PC through RTC or communications Action If the error text does not clarify the problem check for accompanying error messages in both the CA Dispatch and RTC logs Reason An error has been found during the PC download process The text in the error message has been returned from the PC through RTC or communications Action If the error text does not clarify the problem check for acco
244. not use or save this record DC970319 DC Messages Mod RDFGSTAT Fct fctname Event eventname rc xxxx z1z2z3 Reason This is a debugging message activated through the CA Dispatch TRACE STATUS ON command This message is sent either before and after the CAIENF Event interface or in some specific place of the RDFGSTAT Its purpose is for use by Technical Support during debugging When the message appears after a CAIENF Event interface the interface return code is added to the message text The following are the CAIENF Event interface points m Init Interface initialization m Status Event checking This function is called for each event and the event name is specified on the message Control For checkpoint restarting Listen Requesting the next event m Jobinit Processing a Jobinit event m Stepterm Processing a Stepterm event Jobterm Processing a Jobterm event m Jobprint Processing a Jobprint event m Disp144 Processing a Disp144 event m Disp145 Processing a Disp145 event m Disp146 Processing a Disp146 event Term Shutdown the interface The following messages are part of the RDFGSTAT design debugging Control Checking Checkpoint m Listen Checking Flags m Get Data m JobPrint JobName OK JobPrint DDname OK Disp144 Event for us m Post Background Action Send this information on request from Technical Support Chapter 5 DC Messages 351 DC Messages
245. nt data Reason The CA Dispatch Status task has been unable to restart its process from the last checkpoint taken on its previous run The most frequent reason is ENF does not record the event Action This is a warning message If this one appears frequently check your ENF parameters especially for the following events 348 Message Guide CAS9280I Event DISP144 Status Active Record P CAS9280I Event DISP145 Status Active Record P CAS9280I Event DISP146 Status Active Record P CAS9280I Event JOBINIT Status Active Record P CAS9280I Event JOBPRINT Status Active Record P CAS9280I Event JOBTERM Status Active Record P CAS9280I Event STEPTERM Status Active Record P If any of them has a Norecord status use the ENF EVENT eventname REC Operator command DC970313 DC970314 DC970315 DC Messages Status task is listening for CAIENF events Reason This message indicates a successful initialization of the CA Dispatch Status task Action None Bad RC from ENF Listen RC xxxxyyyy Reason This is an internal error The xxxx is the hexadecimal value of the ENF macro return code The yyyy is the hexadecimal value of the ENF macro info code Note A special value of FFFFO001 indicates an unexpected event Action Save all abend information and contact Technical Support Bad RC from ENF Init Status RC xxxxyyyy Reason This is an internal error
246. o access the SPLHDR2 control block for a given report rc is the return code from the CADDSPL Action This message will be preceded by error messages from the CA Dispatch LDS I O Manager Take the specified action for the preceding message CADDSPL Spool Interface Inactive Reason CADDSPL started task is not executing Action Start CADDSPL No Records Possible Empty LDS Reason No records were found by CADDSPL This will occur if no reports were sent to the interface Action Send report output data to the class destination values set on screen VSGMU105 Invalid CAS9SPL Data List Reason An invalid parameter list was passed to CADDSPL This is an internal logic error Action Contact Technical Support CAS9SPL API Error Reason An error was encountered by CADDSPL during processing of CAS9SPL request Internal logic error DC900424 DC Messages Action Contact Technical Support represents one of the following messages Error Updating Report on LDS RC cc Reason RIDF encountered an error updating a report on the CADDSPL LDS Action This message will be preceded by error messages from the CA Dispatch LDS I O Manager Take the specified action for the preceding message Invalid LDS Token or Data Error Reason Either an invalid LDS Token was passed on a read request or the SPLHDR2 record contains bad data pointers Internal logic error Action Contact Technical Support
247. o create WTO messages for MSGCLASS Event processing Action Defined by the user user defined message Reason Used by CADSIFO7 to create WTO messages for Report Event processing Action Defined by the user DC980027 DC980028 DC980029 DC Messages EXTERNAL ARCHIVE IS NOT REQUESTED EXECUTION IS ENDED Reason The job that runs External Archive has begun execution but it cannot find a request for External Archive to run It will end One possible reason for this is that an E ARCH was issued Action External Archive is a job that runs separately from CA Dispatch Its execution is not totally under the control of CA Dispatch Investigate the execution of this job compared to the commands issued online to CA Dispatch EXTERNAL ARCHIVE IS ALREADY ACTIVE EXECUTION IS ENDED Reason The job that runs External Archive has begun execution and found that another copy of it is already executing It will end One possible reason for this is that an S ARCH XT was issued twice Action External Archive is a job that runs separately from CA Dispatch and its execution is not totally under the control of CA Dispatch Investigate the execution of this job compared to the commands issued online to CA Dispatch EXTERNAL ARCHIVE CANNOT OPEN SYSCTL Reason The job that runs External Archive has begun execution and failed to open the SYSCTL data set This data set is required for it to execute properly Action E
248. o execute CADD510W CADD511x CADDSPL SPLCMD open failed Reason An error occurred when opening the SPLCMD ddname This ddname contains the commands to execute during the startup Omit when no command is needed during the startup Action Verify that you require this DD statement in the CADZSPLx procedure SPLx ddname DD not found SPLx is the CADDSPL ID ddname is the referenced DD statement ENFSPLOO or SPLCMD Reason CADD511E This message describes an error and is related to an LDSDD DD card that is missing and is required CADD511W This message is a warning and is related to SPLCMD DD card which is optional The indicated DD statement is not specified in the CADZSPLx procedure ENFSPLOO is required SPLCMD is optional Action Correct the CADZSPLx procedure if needed Chapter 1 CADDSPL Messages 83 CADDSPL CADD512W CADD513W 84 Message Guide SPLX open failed for ddname reason SPLx is the CADDSPL ID ddname is the ddname of the DD card being opened reason is the reason of the error Reason This value can be one of the following Member not found The member indicated in the DD card does not exist in the library m Empty file The file is empty m Security error Your security product rejected your request Action Do one of the following m Correct the CADZSPLx procedure m Adjust your security product if necessary SPLX open failed for ddname Abend sss uuu SPLx is the CADDSPL
249. of active RPO Agents Action No action required Chapter 5 DC Messages 383 DC Messages DC980403 DC980405 DC980406 DC980408 384 Message Guide RPO Driver Task Shutdown Complete Reason This is an informational message indicating that all RPO Agent Tasks are finished and the RPO Driver Task is terminating Action No action required RPO Agent Abending with Code cccc Reason The RPO Agent Subtask has abended with the specified code Action Determine if the abend code is listed in the Messages Guide If so attempt to correct the problem enter screen VRDMU820 and release the bundle marked in error If the problem persists contact Technical Support Reason Specifies the bundle ID report name and job name of the Logical Bundle being processed at the time of the abend Precedes message DC980405 Program CADSOBOO Action None Program pppppppp Error Ending RPO Agent Reason An RPO Agent program encountered an error Action This message is usually preceded by error messages issued by the indicated program Follow the action detailed by the preceding messages DC980411 DC980412 DC980413 DC980414 RPO Data Base Error Module mmmmmmmm Reason DC Messages An error occurred in the specified database program This message is followed by messages DC980412 through DC980414 Action Contact Technical Support Error Status Xxxx Reason This is an IDMS Error S
250. om panel VOVMI330 PPPPPPPP Profile name used for customized print if the request was from panel VOVMI330 An example a reprint from panel VOVMI110 08 18 2004 04 12 55 DC900602 User SUSERO1 Panel VOVMI110 Reprint OLV TESTRPT SUSERO1A NEWRPT NEWJOB An example a reprint from panel VOVMI330 08 18 2004 04 13 10 DC900602 User SUSERO1 Panel VOVMI330 Reprint OLV TESTRPT SUSERO1A KEVIN SMITH C TESTPROF Action None DC900603 DC900604 DC Messages User UUUUUUUU Panel PPPPPPPP Added Download Rqast RRRRRRRR JJJJJJJJ CCCCCCCCCCCCCCCC DDDDDD TTTT PCPCPCPC Reason A PC selective download request has been added using the online screens UUUUUUUU User name PPPPPPPP Panel name RRRRRRRR Report for download JJJJJJJJ Jobname of the report for download ccc CCC Recipient if the reprint was from panel VOVMI330 DDDDDD Create date of the report being downloaded TTTTT Create time of the report being downloaded PCPCPCPC PC User for whom the request is being created An example of a PC download request would look like 08 18 2004 04 12 33 DC900603 User SUSERO1 Panel VOVMI350 Added Download Rqst TESTRPT SUSERO1A KEVIN SMITH 930104 1245 SMIKEO1 Action None User UUUUUUUU Panel PPPPPPPP Added Upload Rast RRRRRRRR JJJJJJJJ FFFFFFFFFFFF CCCCCCCCCCCCCCCC PCPCPCPC Reason A PC selective upload request has been added using the online screens UUUUUUUU User name PPPPPPPP Panel name RRRRRRRR Report
251. ompanied by the DC900375 message in the JESLOG take the action described in that message DSRQSDEL CANNOT OPEN DISPCTL or DSRQSDEL CANNOT OPEN CAICTL Reason An attempt to open either the DISPCTL or CAICTL files in program DSRQSDEL failed Action Validate that the specified file is defined to the CA Dispatch startup JCL If the problem persists contact Technical Support Chapter 5 DC Messages 241 DC Messages DC900370 DC900371 DC900372 DC900373 242 Message Guide ONLINE VIEWING ONLY MODE CANNOT UPDATE Reason An unsupported update was attempted from a screen in a CA Dispatch Online Viewing Only system Action Perform the update from the main CA Dispatch system MULTIPLE NUMBER OF PAGES TO BE SEARCHED CAN NOT BE SPECIFIED Reason You specified more than one value for the maximum number of pages to be searched for the FIND command Action Reenter the command MULTIPLE SEARCH START COLUMN VALUES CAN NOT BE SPECIFIED Reason You specified more than one search start column for the FIND command Action Reenter the command MULTIPLE SEARCH END COLUMN VALUES CAN NOT BE SPECIFIED Reason You specified more than one search end column for the FIND command Action Reenter the command DC900374 DC900375 DC900378 DC900380 DC Messages MULTIPLE PREV NEXT FIRST LAST PARAMETERS CAN NOT BE SPECIFIED Reason You specified more than one directional parameter on the F
252. on Check your input to see if the fields you included are allowable in the specified operand Also check your delimiters an omitted delimiter can cause CA Dispatch to read an operand or a statement as a field in an operand OPERAND nnnnnnnn INVALID FOR STATEMENT nnnnnnnnnnnnnnnn TRANSACTION REJECTED Reason You input an operand field in this transaction that cannot be used in the specified statement Action Check your input to see if the operands you included are allowable in the specified statement Also check your delimiters an omitted delimiter can cause CA Dispatch to read a statement as an operand in the previous statement DCDO022E DCDO023E DCDO024E DCD Messages MULTIPLE nnnnnnnn OPERANDS SPECIFIED FOR STATEMENT nnnnnnnnnnnnnnnn TRANS REJECTED Reason You input a statement and CA Dispatch read the transaction as having more than one of the same operand For example CA Dispatch may have read two DAY operands as part of the same statement Action Check your input to see if you supplied only one operand Also check your delimiters an omitted delimiter can cause CA Dispatch to read an operand from a later statement as part of the previous statement NO ENDING PERIOD FOUND FOR LAST STATEMENT nnnnnnnn Reason You input a statement to CA Dispatch without an ending period Action Insert the period at the end of a CA Dispatch transaction RECIPIENT NOT DEFINED ON DATA BASE FOR REPORT nnnnnnnn W
253. on Restart RPI or OLV Invalid Event Definition Reason One of the fields in a Report Event Definition is incorrect Action Put the report on hold in the RPI queue then go to the VRDMU115 screen for that report and check the Event Definition for errors in column number comparator action or search text RPI CADSIFO4 Bundle Reprint Error Report RRRRRRRR Job JJJJJJJJ Reason RPI Program CADSIFO4 was performing a Bundle Reprint and encountered an error attempting to process Report RRRRRRRR and Job JJJJJJJJ This is an internal logic error Action Contact Technical Support DC980400 DC980401 DC980402 DC Messages Storage Not Available for pppppppp with Return Code cc Reason A storage request for program pppppppp failed due to an insufficient amount of available IDMS storage Action Restart RPO If the problem persists shut down the CA Dispatch address spaces and increase the STORAGE parameter in the CA Dispatch Usergen parameter list Run the Usergen JCL procedure restart CA Dispatch and restart RPO If the problem still persists contact Technical Support RPO Driver Task Stae Invoked Reason The RPO Driver Task has abended with a program exception Action Restart RPO If the problem persists contact Technical Support RPO Driver Task Ending nn RPO Agents Reason This is an informational message indicating that the RPO Driver Task is normally terminating the specified number
254. on required of the preceding messages Restart Archive If the error recurs it will be preceded by another error message Save all error information and contact Technical Support CADSAFSQ ACIF DISP File Error Reason Program CADSAFSQ received an error from an ACIF DISP File function Action This message is preceded by messages DC970150 through DC970158 Perform the action required of the preceding messages Restart Archive If the error recurs it will be preceded by another error message Save all error information and contact Technical Support FileTek Interface Module LSMCALL Not Found Reason Archive or Extract tasks failed to load module LSMCALL to perform FileTek optical disk I O functions Action Add FileTek optical disk loadlib to SYSLIB DD concatenation Chapter 5 DC Messages 373 DC Messages DC980200 DCc980201 DC980202 374 Message Guide Storage Not Available for pppppppp with Return Code cc Reason A storage request for program pppppppp failed due to an insufficient amount of available IDMS storage Action Restart RPI If the problem persists shut down the CA Dispatch address spaces and increase the STORAGE parameter in the CA Dispatch Usergen parameter list Run the Usergen JCL procedure restart CA Dispatch and restart RPI If the problem still persists contact Technical Support RPI Task Abending with Code cccc Reason The RPI Subtasks have abended with the specified code
255. one Chapter 1 CADDSPL Messages 63 CADDSPL CADD340E CADD341 SAPx taskid Read JFCB Error rc nnnn xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH nnnn is the decimal return code Reason The SAPI task received an error during the read JFCB process for a given JES data set Messages CADD360I CADD361 and CADD3621 which follow the current message or the previous CADD330I message give more information about the JES data set This is an internal error Action Contact Technical Support SAPx taskid Open Error rc nnnn for xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH nnnn is the decimal return code Reason The SAPI task received an error during the open process for a given JES data set Messages CADD360I CADD361 and CADD3621 which follow the current message or the previous CADD330I message give more information about the JES data set This is an internal error Action Contact Technical Support 64 Message Guide CADD342S CADD343E CADDSPL SAPx taskid I O Error diagnosis information x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH diagnosis information is the information given by the access method Reason The SAPI task encountered an error while reading a JES data set the diagnosis information field displays the error message as it was returned by the access method Messages CADD3
256. option Information has been updated Reason You successfully updated the CA Dispatch database with either report distribution or status information Action No action required SYSTEM REQUIRES A SYSGEN Reason You attempted to use a screen that requires Sysgen information be entered first on the appropriate Sysgen screen Action Supply the required Sysgen information SELECTION OPTION MUST BE SPECIFIED Reason You have not specified an option on a menu or a scroll screen Action Select the option you want Chapter 5 DC Messages 173 DC Messages DC900007 DC900008 DC900009 DC900010 174 Message Guide THE RECORD DOES NOT EXIST PLEASE ADD OR CANCEL Reason You are adding either a base report a report recipient or a recipient record to the database This message is also issued from the Online Viewing Recipient Selection Screen VOVMI300 if an OLV user record was not defined Action Press PF10 to add or PF2 to cancel A REPORT NAME MUST BE SPECIFIED Reason You did not specify a report name on a scroll screen Action Enter the report name in the report field If you cannot remember the report name scroll through the screens until you find it INFORMATION ALREADY EXISTS ON THE FILE ADD IGNORED Reason You pressed PF10 to add a record to the database but the record already exists Your request to add was ignored Action No action required TO CONFIRM DELET
257. or information and contact Technical Support Reason Specifies the report job name and JES job number of the report that encountered a previously issued error message Action None xxxx RETURN CODE FROM DYNAMIC ALLOC ERROR Reason This dynamic allocation error DYNALLOC in OVFGSOUT for the output file occurred when doing a reprint from Online Viewing No output was written Action Check the return code from DYNALLOC for the action required If the Class or Destination is invalid correct it on the Dedicated Sysout Control Information Screen VSGMU105 and reprint the report Chapter 5 DC Messages 367 DC Messages DC980118 represents one of the following messages Enter ALL ALLTAPE ALLOPT ARCHxTAPE ARCHxOPT Reason A subparameter is missing Action Enter the required subparameter ALL ALLTAPE ALLOPT ARCHxTAPE or ARCHxOPT where x specfies the archive subtask Tape Volser Initialized Reason This message is informational only Action No action required Optical Volser Initialized Reason This message is informational only Action No action required Sub Parm is Invalid Please Reenter Reason An invalid subparameter was entered Action Enter a valid subparameter ALL ALLTAPE ALLOPT ARCHxTAPE or ARCHxOPT where x specfies the archive subtask No Sub Parms Entered Reason This is an error in the field after the second attempt to enter the correct subparameter A
258. or occurred while attempting to close a JES output data set for MSGCLASS Action Save all error information and contact Technical Support DC980644 DC980645 DC980646 DC Messages Error Writing to MSGCLASS SYSOUT File Reason An error occurred while attempting to write a JES output data set for MSGCLASS Action Save all error information and contact Technical Support MSGCLASS SYSOUT LDS mmmmm Error RC cc Reason MSG Program CADSMFO6 encountered an error attempting to retrieve a MSGCLASS report from CADDSPL The CA Dispatch DSLOG file contains error messages from the LDS I O manager that indicate the actual problem Action Restart MSG If the problem persists save all error information and contact Technical Support Reason The name of MSGCLASS Report Job or Jes or both is in error Action None Chapter 5 DC Messages 403 DC Messages DC980649 DC980650 DC980811 404 Message Guide ARCHn Archive Task using ICSF Encryption ARCHn is the CA Archive Task ID Reason This message is part of the Archive Task initialization It indicates that ICSF encryption IS being utilized and key interval in days setting Action Start ICSF task or set Sysgen Archive Encryption to N task SAPI Task Has Ended Due To Error Reason A condition was encountered by a SAPI task task is either MSG RPI1 RPI2 RPI3 or ARCH and it is terminating itself Program CADSST13 Action Restart th
259. ort File Error Reason Program CADSUFSQ received an error while processing the ACIF report file Action Contact Technical Support Error Creating Storage Pool Data Space Reason An error return code was received from the IBM DSPSERV macro trying to create an internal Dispatch data space Usually this message is generated in connection with the DC970182 message Action Review the action specified for DC970182 DC970182 DC970184 DC970185 DC Messages Error Creating Data Space xxxxxxxx RC nn Reason The data space requested could not be created by the IBM DSPSERV macro The XXXXXXXX indicates which data space is having a problem and nn is the return code value Action Make sure that you have reviewed the requirements for Updating the MAXCAD Assignment outlined in Chapter 4 of the Getting Started Guide Review your IEFUSI installation exit for any system limitation on Data Space allocation see in z OS MVS Installation Exits Contact Technical Support Error Deleting Data Space nnnnnnnn RC ccc Reason An error occurred on the DSPSERV macro used to delete the named CA Dispatch data space Action MVS job termination will automatically delete data space If the problem persists contact Technical Support Error Deleting ALET for Data Space nnnnnnnn RC ccc Reason An error occurred on the MVS ESA ALESERV macro used to delete an ALET for the named CA Dispatch data space Action MVS
260. overy routine was invoked Action Re attempt the transfer request If the error persists save all error information and contact Technical Support DC900508 DC900520 DC Messages CADSXFSQ ACIF Status File Error Reason Program CADSXFSQ received an error from an ACIF Status File function Action This message is preceded by a combination of messages DC970120 through DC970130 Perform the action required for the messages Attempt the transfer request again If the error recurs it will be preceded by another error message Save all error information and contact Technical Support CADSSETR uuuuuuuu Inqy Err XXXXXXXXXXXXXXXX Reason Program CADSSETR received an error on a CAICCI Inquiry request on behalf of the specified user Action This message contains the CAICCI error message text indicating the error encountered Attempt the transfer request again If the problem persists save all error information and contact Technical Support Chapter 5 DC Messages 271 DC Messages Dc900521 DC900522 272 Message Guide a CADSSETR uuuuuuuu DuplUser User is Already Using Report Transfer or b Reason a The specified user is attempting to initiate a PC transfer but is already transferring under another session Action a None b CADSSETR uuuuuuuu MultUser Logic Error Multiple Matches Reason b The specified user is attempting to initiate a PC transfer but is already transferring under multiple ses
261. pe to the CA Dispatch scratch pool but not all the archived data sets have been deleted from the tape Action Either do not return the tape to the pool or delete the remaining data sets Chapter 5 DC Messages 185 DC Messages DC900063 DC900064 DC900066 DC900067 186 Message Guide This is a Distributed File cannot View or Print Reason A user has attempted to View or Print a Distributed file from Dispatch Online Viewing screens VOVMIO10 or VOVMI310 Action Use Output Management Web Viewer to view or print this report Reason The CA Dispatch Distribution task has encountered a report that caused an I O error This may mean that the report is incomplete nnnnnnnn represents the JES ID rrrrrrrr message I OE will appear in the last four positions of the report description field of the printed output and the message I O ERROR will appear for each entry on the Manifest Report with an I O error This message can also be caused by an empty data set and will not have a JES number report or job name Action No action required MAILDROP NAME IS INVALID OR CURSOR IS NOT POSITIONED PROPERLY Reason You selected a particular maildrop and either entered a maildrop name that is not defined to the database or you did not place your cursor in the proper position on a scroll screen Action Check the maildrop name or the position of the cursor INVALID MAILDROP NAME SPECIFIED IN THE COPY FIELD
262. ppend LDS failed because it was already in the requested state Action None UTIL SNT address SPAI address SPOI address Reason This is the first message after a MAP command It displays the addresses of the global CADDSNT CADDSPAU and CADDSPOI modules Action None Chapter 1 CADDSPL Messages 107 CADDSPL CADD657I1 CADD658I1 CADD6591 CADD660E 108 Message Guide UTIL MSG address MSGT address Reason This is the second message after a MAP command It displays the addresses of the global CADDMSG CADDMSGT modules Action None UTIL SPLx SNT2 address SPLZ address SPL address Reason This is the first message after a MAP command for the specific SPLx environment It displays the addresses of the SPLSNT2 entry and the specific CADDSPLZ and CADxSPL modules Action None UTIL SPLx SPLT address ITSK address LDST address Reason This is the second message after a MAP command for the specific SPLx environment It displays the addresses of the SPLTABL ITASK and LDS table control blocks Action None UTIL LDS ddname is the Root LDS not an Append Reason The ddname referencing the ROOT LDS was used in a command requesting an Append LDS The command is rejected Action None CADD661E CADD662E CADD663E CADDSPL UTIL Append LDS ddname already connected to the Root LDS Reason A request to add a new Append LDS was rejected because this one is already in th
263. pport CA CCI Close Error CC nnn Reason An error occurred while attempting to end a binary PC download Action Check any previously issued messages from CADSXCCI for any additional information Re attempt the transfer request If the problem persists save all error information and contact Technical Support Error Allocating PC Download Binary Report File Reason An error occurred while attempting to allocate a report file for a binary download This message is preceded by a DC970033 message Action Re attempt the transfer request If the error persists save all error information and contact Technical Support DC900627 DC900628 DCc900629 DC900630 DC Messages Error De allocating PC Download Binary Report File Reason An error occurred while attempting to de allocate a report file for a binary download This message is preceded by a DC970033 message Action Re attempt the transfer request If the error persists save all error information and contact Technical Support Error Opening PC Download Binary Report File Reason An error occurred while attempting to open a report file for a binary download Action Re attempt the transfer request If the error persists save all error information and contact Technical Support Error Reading from PC Download Binary Report File Reason An error occurred while attempting to read from a report file for a binary download Action Re attempt the
264. ppressed by DAE there has already been a dump written for the same abend so this action is not necessary If the dump is not successful a SYSUDUMP will be written for the abend Contact your system programmer to correct the problem CAIENF is not active Status task ending Reason The CAIENF CA Event Notification Facility address space is required in order to run the CA Dispatch Status task Action Start your CAIENF address space usually this is a S ENF command and restart the CA Dispatch Status task Chapter 5 DC Messages 347 DC Messages DC970311 CAIENF event nnnnnnnn is not active Reason During initial checking a specific ENF event has been found inactive This event has to be active in order to run the CA Dispatch Status task The following status is required for the CA Dispatch Status task CAS9280I Event DISP144 Status Active Record P CAS9280I Event DISP145 Status Active Record P CAS9280I Event DISP146 Status Active Record P CAS9280I Event ENFTERM Status Active Norecord P CAS9280I Event JOBINIT Status Active Record P CAS9280I Event JOBPRINT Status Active Record P CAS9280I Event JOBTERM Status Active Record P CAS9280I Event STEPTERM Status Active Record P Action Activate the required event with the ENF EVENT eventname ACT Operator command and restart the CA Dispatch Status task DC970312 CAIENF Control check point failed continue with curre
265. presents one of the following messages CADSXCCI uuuuuuuu Send Err Send of Abort Message Has Timed Out or CADSXCCI uuuuuuuu Conv Err Converse with CCI Has Timed Out Reason While performing the indicated function program CADSXCCI did not receive a response from the client in the required amount of time Action The session is disconnected Re attempt the transfer request If the problem persists save all error information and contact Technical Support CADSXCCI uuuuuuuu INDSFILE Transfer Failed Using Send Receive Reason Program CADSXCCI has received an error attempting to transfer the report using the INDSFILE interface Action Re attempt the transfer using the standard CAICCI interface Make sure your client software includes INDSFILE transfer support If the problem persists save all error information and contact Technical Support Chapter 5 DC Messages 291 DC Messages DC900588 DC900600 292 Message Guide CADSXCCI uuuuuuuu Ingy Err Logic Error Multiple Matches Reason The specified user is attempting to initiate an INDSFILE transfer but is already using INDSFILE under another session Action None Messages DC900600 to DC900608 are the Audit Trail Messages All audit trail messages are saved in the DSLOG SYSOUT data set of the region where the user is signed on The user can set up the started task JCL to have the DSLOG sent as SYSOUT back through CA Dispatch for archiving thereby preserving the aud
266. r 1 CADDSPL Messages 31 CADDSPL CADDO86I CADDO087E CADDO88E 32 Message Guide SPLx waiting for CAIENF to initialize SPLx is the CADDSPL ID Reason CADDSPL initialization requires that the CAIENF address space is active This message is issued when CAIENF address space is not active CADDSPL waits until CAIENF is started and active Action Check the status of CAIENF If needed start CAIENF SPLx Error building Sort data space SPLx is the CADDSPL ID Reason CADDSPL is unable to start the sort data space Action Contact Technical Support CADDSPLI is not APF authorized Reason CADDSPL initialization must be APF authorized This message is issued when an unauthorized library is integrated in the STEPLIB concatenation The CADDSPLI stops immediately Action Define all of the libraries in the STEPLIB concatenation as APF authorized CADDOSOI CADDO94E CADDO96E CADDSPL SPLx Open Reports nnnnnnnn SPLx is the CADDSPL ID nnnnnnn is the number of opened reports Reason The message is part of the response to a STAT X command and part of the intercept stoppage CADD084I and CADDO85I messages are written for each opened report Action None SPLx intercept not active SPLx is the CADDSPL ID Reason Error condition A F SPLx STATUS command was issued but the CADDSPL interface is not active The spool interface was not started or it may have stopped intercepting SYSOUT data sets
267. rectly entered the JES number Action Verify the JES number and reenter it correctly NO STATISTICS ARE AVAILABLE Reason Database report statistics were not found for your selection Action Verify your selection and reenter it INVALID JES NUMBER Reason You incorrectly entered the JES number Action Verify the JES number and reenter it correctly DC900075 DC900076 DC900078 DC900080 DC Messages VOLSER FOR PRINT REQUEST IS IN USE ENTER CANCEL COMMAND OR PRESS ENTER TO PROCESS Reason You are trying to extract a report from the current archive tape Action Press Enter to allow extract from the current archive tape or enter CANCEL to cancel the request Note that the extract will only occur after the archive task is ended IDEN RECORD DOES NOT EXIST USE SCREEN VSGMU170 TO CREATE IT Reason You are trying to add a DJDE record when the default process has not been built yet Action Go to the SYSGEN screen and create the defaults the IDEN record will be built when screen VSGMU170 is entered REPORT HAS BEEN PRINTED Reason An informational message stating that you have successfully reprinted a report from Online Viewing Action None PRINTER ID OVERRIDE IS NOT ALLOWED Reason The User Sysgen option is set to N X1 is invalid for this user ID Action None unless the report administrator wishes to change the option on the VSGMU135 screen Chapter 5 DC
268. rely Ended Reason This message is received on the VPCMU310 screen when trying to delete a PC download request and can occur from the Main region or the Online Viewing Only region Additionally a Dynamic Allocation Error 0860 message will appear on the CA Dispatch Job Log and PCLOG Action Re attempt the desired ACIF function If the error recurs it will be preceded by another error message Save all error information and contact Technical Support The PC Control Screen VPCMU100 may have missing Binary Transfer data in the Unit or Prefix fields Enter the missing data in these two required fields CADSUBSQ Background STAE Routine Invoked Reason A program exception occurred in program CADSUBSQ and its STAE recovery routine was invoked Action Re attempt the desired ACIF function If the problem persists contact Technical Support Chapter 5 DC Messages 341 DC Messages DC970142 DC970144 DC970145 DC970171 342 Message Guide Unable to Attach CADSUFSQ Task Reason The displayed CA Dispatch subtask was not started due to an MVS ATTACH error Action Re attempt the desired ACIF function If the problem persists contact Technical Support CADSUFSQ ACIF Status File Error Reason Program CADSUFSQ received an error from an ACIF Status File function Action This message is preceded by messages DC970120 through DC970130 Perform the action required of the preceding messages CADSUFSQ Rep
269. report and is unable to delete the report Action Contact Technical Support Chapter 1 CADDSPL Messages 49 CADDSPL CADD258W CADD259I CADD260E 50 Message Guide JOBnnnnn lt jobname gt lt DDname gt Error during purge rc XXXXXXXX nnnnn is the JES job number that created the report Jobname is the jobname that created the report DDname is the ddname DD card used to create the report Reason An error occurred during the deletion of the indicated data set rom the linear data set LDS The return code gives additional information This message documents the deletions performed by CADDSPL and appears in the CADDSPL message log Action Contact Technical Support SPLx CLOSE waiting for Purge task cessation SPLx is the CADDSPL ID Reason The Close process is waiting for the completion of the Purge task Action None File XXXXXXXX Error retrieving Name Token Jobid ddname rc xx XXXXXXXX is the token of the control block defining the report jobid is the JES job identification for the job creating the report ddname is the ddname used to create the report xx is the return code of the name token function called Reason Name token checking suppresses reports left in undefined status During this check the delete process received an unknown return code from the Name token service CADDSPL is unable to delete this report Action Contact Technical Support CADD261W CADDSPL File XXXXXX
270. report being processed Writername is the associated writer name for the report being processed Reason The message is part of the response to a STAT X command and is displayed for each report currently processed by a SAPI task Action None SPLx Open Reports SPLx is the CADDSPL ID Reason This message is part of the response to a STAT X command This message is followed by messages CADDO84I and CADDO85I for each open report Action None 30 Message Guide CADDSPL CADDO84I CADDO85I SPLx Token token Jid jobid PrcStep procstepname Step stepname SPLx is the CADDSPL ID Token is the token ID associated with the opened report Jid is the JES job ID of the opened report PrcStep is the procstep name of the opened report Step is the step name of the opened report Reason This message is issued in response to a STAT X command or an intercept being stopped CADD184I CADDO84I and CADDO85 messages are written for each opened report Action None SPLx Token token Class class Dest destination Origin origin SPLx is the CADDSPL ID Token is the token ID associated with the opened report Class is the output class of the opened report Dest is the destination of the opened report Origin is Intercept or SAPI task Reason This message is issued in response to a STAT X command or an intercept being stopped CADD184I CADD0841 and CADDO85 messages are written for each opened report Action None Chapte
271. rerun the ACIF request Chapter 5 DC Messages 333 DC Messages DC970107 DC970108 DC970109 334 Message Guide Inline AFP Control Record Not Found Reason The CA Dispatch database record that contains the default AFP resource definitions cannot be found on the database Action Add all the required information on the Default AFP Resources Screen VSGMU241 and rerun the ACIF request Inline AFP Resource Group xxxxxxxx Not Found Reason The CA Dispatch Inline AFP Resource Group specified in the message cannot be found Action Either add an Inline AFP Resource Group on the Inline AFP Resource Group Definition Screen VSGMU245 or change the Resource Group name on the Report Archive Definition Screen VARMU100 to an existing Resource Group name After making the changes rerun the ACIF request Inline AFP Library Group xxxxxxxx Not Found Reason The CA Dispatch Inline AFP Library Group specified in the message cannot be found Action Modify the Inline AFP Library Group name on the Inline AFP Resource Group Definition Screen VSGMU245 for the Resource Group being processed to the name of an existing Library Group After making the changes rerun the ACIF request DC970110 DC970111 DC970112 DC970113 DC Messages pppppppp Database Error Error Status eeee Reason The CADSAFJC program issued a database request which encountered an error Action This message is preceded by messages DC
272. rmation about the JES data set This is an internal error Action Contact Technical Support 68 Message Guide CADDSPL CADD350E CADD351W SAPx taskid I O Error on LDS for xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The SAPI task received an error when writing the data space on to the LDS for a given JES data set Messages CADD3601I CADD361 and CADD3621I which follow the current message or the previous CADD330I message give more information about the JES data set This is an internal error Action Contact Technical Support SAPx taskid File pending recovery for another JES Data Set x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason Informational The SAPI MSG task received a JES data set to process and detected the last processed JES data set for this job was interrupted The process for the current JES data set is deferred until the interrupted JES data set is successfully recovered Messages CADD360I CADD361 and CADD3621 which follow the current message or the previous CADD330I message give more information about the current JES data set Action None Chapter 1 CADDSPL Messages 69 CADDSPL CADD352S CADD353W SAPx taskid File should not be in recovery for x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason Informational The SAPI MSG task received a JES data
273. rn code of rc with reason code reas was returned by CADDSPL during an update function Action Contact Technical Support CADDSPL Spool Interface Quiesced Reason An attempt to modify a report from the LDS failed because CADDSPL is in quiesce read only mode and all update activity is prohibited Action Restart task processes when CADDSPL is in update mode To enable update mode issue the following command from the MVS console F SPLx RESUME 308 Message Guide DC970015 DC Messages represents one of the following messages Cannot Delete Report is Open Reason A report cannot be deleted while it is being processed Action Wait until the report is not in OPEN status on screen VOPMI200 before attempting any updates SPLHDR2 Not Found in Data Space Reason An invalid LDS Token was passed on an update request This is an internal logic error Action Contact Technical Support SPLHDR2 Not Found in Index Reason An invalid LDS Token was passed on an update request This is an internal logic error Action Contact Technical Support CADDSPL Spool Interface Quiesced Reason An attempt to delete a report from the LDS failed because CADDSPL is in quiesce read only mode and all update activity is prohibited Action Reissue the delete request when CADDSPL is in update mode To enable update mode issue the following command from the MVS console F SPLx RESUME Delete Error RC rc
274. rnal logic error with CA Dispatch LDS Buffer Manager CADSLDIO Action Contact Technical Support No CADS9SPL Address Cannot Branch Reason The address of the LDS I O Manager was not provided on a SLDSREAD macro with the CALL NO option Action Contact Technical Support DC970009 DC970010 DC970011 DC Messages CADS9SPL Error See Prior Messages Reason Program CADSLDIO received bad return code values from program CADS9SPL Action See the previously issued messages from CADS9SPL and contact Technical Support Invalid Record Zero Length Reason An invalid record was read from CADDSPL This is an internal logic error Action The requesting task will abend with a U1434 abend code If the task is RPI MSG or Archive enter the Report Input Display Facility screen VOPMI200 and place the report in HOLD status If the task is RPO do not release the Logical Bundle for printing If the task is OLV do not view the report until the problem is resolved Save all error information and contact Technical Support Invalid LDS Input Queue Value Reason A request for an invalid LDS input queue was made This is an internal logic error Action Contact Technical Support Chapter 5 DC Messages 305 DC Messages DC970012 306 Message Guide represents one of the following messages CADDSPL Spool Interface Inactive Reason The CADDSPL started task is not executing Action Start the CA
275. rred on the IDMS LINE PTE or LTE Back End System Has Been Shut Down Reason The CA Dispatch region that this user is communicating with has been shut down Action Users should log off and after restarting CA Dispatch they will be able to log on again CADSO198E CADS0O199E CADSO200E CADS Messages User Connection to CA Dispatch has been lost Reason A user has been disconnected from CA Dispatch This is most probably due to a user timeout from either CA Dispatch CA DRAS or the Web Viewer Action Check the timeout values specified in all products involved Also check to see if CA Dispatch has been brought down or if it has abended Check the CA DRAS and CA Dispatch logs for supporting information Unable to allocate requested storage Reason Module CADSQXCV had a problem when trying to acquire storage needed for processing Action Check the logs for other storage related messages If the problem persists recycle the CA DRAS region If the problem occurs again in a short period of time contact Technical Support Attach failed for UCFAPI Reason Module CADSQXST had a problem when trying to attach the UCFAPI module Action Check the logs for related messages Verify that module UCFAPI has been properly identified to the CA DRAS job Chapter 2 CADS Messages 149 CADS Messages CADSO201E CADSO201E CADSO202E 150 Message Guide Internal error Map not processed Reason Th
276. rt Archive If the error recurs it will be preceded by another error message Save all error information and contact Technical Support Error Allocating Physical Sequential Report File Reason An error occurred attempting to allocate a report file for archiving AFP resources This message is preceded by a DC970033 message Action Restart Archive If the error recurs it will be preceded by another error message Save all error information and contact Technical Support DC980131 DC980132 DC980133 DC980134 DC Messages Error Deallocating Physical Sequential Report File Reason An error occurred attempting to deallocate a report file for archiving AFP resources This message is preceded by a DC970033 message Action Restart Archive If the error recurs it will be preceded by another error message Save all error information and contact Technical Support Error Opening Physical Sequential Report File Reason An error occurred attempting to open a report file for archiving AFP resources Action Restart Archive If the error recurs it will be preceded by another error message Save all error information and contact Technical Support Error Closing Physical Sequential Report File Reason An error occurred attempting to close a report file for archiving AFP resources Action Restart Archive If the error recurs it will be preceded by another error message Save all error information and contact Techn
277. rying to reprint from OLV and the Sysgen reprint class is not defined Action Access the Dedicated Sysout Information Control Screen VSGMU105 and enter the required value PASSTHRU REPORT CANNOT BE EXTRACTED TO OLV Reason An attempt was made to extract a report defined with the passthru option and send it to OLV Action None PRINTER ID REQUESTED IS NOT DEFINED Reason You are trying to access a printer that is not defined to CA Dispatch Action Define the printer OVBGDBOV Recovering From Database Deadlock Reason The OLV program OVBGDBOV has successfully recovered from a database deadlock condition This message is preceded by an IDMS deadlock message Action None Chapter 5 DC Messages 215 DC Messages Dc900219 DCc900220 DC900226 DC900227 216 Message Guide OVBGDBPR Recovering From Database Deadlock Reason The OLV program OVBGDBPR has successfully recovered from a database deadlock condition This message is preceded by an IDMS deadlock message Action None A SHUTDOWN FOR XXXXXXXX HAS BEEN PROCESSED Reason The indicated subtask has been ended Action None SECURITY CODE VIOLATION REQUESTED CHANGE DENIED Reason You attempted to execute a function for which you do not have password authority Action Enter CANCEL REPORT MARKED FOR DELETE BATCH PROCESS REQUIRED TO DELETE Reason All reports have been deleted but they are soft dele
278. s save all error information and contact Technical Support MSG Foreground Task Has Ended Due to Error Reason A condition was encountered by MSG and it is terminating itself see program CADSMFOO Action Restart MSG If the problem persists save all information and contact Technical Support Chapter 5 DC Messages 397 DC Messages DC980620 DC980621 DC980622 DC980623 398 Message Guide MSG Foreground Task Has Ended Reason As part of shutdown processing MSG is terminating cleanly Action None CADS Sysgen Required Use VSGMI100 Screen Reason Information needed to execute the MSG task has not been added to the CA Dispatch database Action Enter online screen VSGMI100 enter the required information and restart MSG pppppppp Data Base Error Error Status eeee Reason An MSG foreground program issued a database request which encountered an error Action This message is preceded by messages DC980611 through DC980614 See these messages for the appropriate action Error Accessing LDS RC ccc See DSLOG Reason MSG Program CADSMFO2 encountered an error attempting to retrieve the next available report from CADDSPL The CA Dispatch DSLOG file contains error messages from the LDS I O manager that indicate the actual problem Action Restart MSG If the problem persists save all error information and contact Technical Support DC980627 DC980629 DC Messages CADSMFO0
279. s Not Exist Reason An attempt to read an ACIF Status File found that the file no longer exists Action Rerun the ACIF request If the problem persists save all error information and contact Technical Support File FfFFFFFFFFFFF EEEE EEE EF Reason ACIF Status File name in error Action None Chapter 5 DC Messages 339 DC Messages DC970132 DC970133 DC970134 DC970135 340 Message Guide Error Allocating Old Report File Reason An error occurred while attempting to allocate an existing ACIF Report file in order to delete it This message is preceded by a DC970033 message Action See if the file exists If it does save all error information and contact Technical Support Error Deallocating Report File Reason An error occurred while attempting to deallocate an existing ACIF Report file in order to delete it This message is preceded by a DC970033 message Action See if the file exists If it does save all error information and contact Technical Support Invalid Function Code Reason CADSAFRP was called with an invalid function code Action Contact Technical Support ACIF Report File Does Not Exist Reason An attempt to delete an ACIF Status File found that the file no longer exists Action None DC970136 DC970140 DC970141 DC Messages File Ffff EEEE EEEE fFF Reason ACIF Report File name in error Action None CADSUFSQ Task Prematu
280. second date and time supplied Action Make sure that the first date and time precedes the second date and time chronologically REQUIRED FIELDS ARE MISSING WITHIN STATEMENT nnnnnnnn Reason You did not supply certain fields with the statement nnnnnnnn Action Supply the missing fields DCD Messages DCDOO07E DCDO010E DCDO011E JOBNAME nnnnnnnn FROM SCHEDULE FILE NOT FOUND ON DATABASE Reason You input the PLAN or LATE statement specifying CA 7 Job Management or CA Scheduler Job Management input and a job name on the schedule was not found on the CA Dispatch database The interface between the schedule and CA Dispatch is the job name Action The job names for reports to be planned with schedule input must be defined to CA Dispatch STATEMENT nnnnnnnn TOO LONG TRANSACTION REJECTED Reason The statement nnnnnnnn named in the message is too long Statements cannot be more than eight characters long Action Check your input to see if you input the correct statement Also check to see whether you included the proper delimiters OPERAND nnnnnnnn TOO LONG TRANSACTION REJECTED Reason The operand nnnnnnnn named in the message is too long operands cannot be more than eight characters long Action Check your input to see if you input the correct operand Also check to see whether you included the proper delimiters Chapter 6 DCD Messages 413 DCD Messages DCDO012E DCDO0013E DCDO014
281. set Action None SAPx taskid ddn ddname Dsid proc procstepname x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH ddname is the ddname of the current JES data set dsid is the data set ID as given by JES stepname is stepname of the current JES data set Reason This is an informational message associated with the CADD330I message or any error message associated with this current JES data set Action None CADDSPL CADD3621 CADD365I SAPx taskid dsn dsname X is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH dsname is internal dsname of the current JES data set Reason This is an informational message associated to the CADD330I message or any error message with this current JES data set Action None SAPx taskid LDS full relieved Process resuming xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The LDS full condition is gone and the SAPI task is resuming its process Action None Chapter 1 CADDSPL Messages 75 CADDSPL CADD366W CADD367W 76 Message Guide SAPx taskid Report in error relating to token hhhhhhhh x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH hhhhhhhh is the hexadecimal value of the token for the report Reason When a SAPI task starts it looks for reports routed to destination SSExtaskid Reports are sent to this destination when
282. sions This is an internal logic error Action b Contact Technical Support CADSSETR uuuuuuuu Init Err XXXXXXXXXXXXXXXX Reason Program CADSSETR received an error on a CAICCI Init request on behalf of the specified user Action This message contains the CAICCI error message text indicating the error encountered Attempt the transfer request again If the problem persists save all error information and contact Technical Support DC900523 DC900524 DC900526 DC Messages CADSSETR uuuuuuuu Recv Err XXXXXXXXXXXXXXXX Reason Program CADSSETR received an error on a CAICCI Receive request on behalf of the specified user Action This message contains the CAICCI error message text indicating the error encountered Attempt the transfer request again If the problem persists save all error information and contact Technical Support CADSSETR uuuuuuuu CCI Receiver Established for User Reason CA Dispatch Program CADSSETR has successfully established a CAICCI signon on behalf of the specified CA Link user Action None User uuuuuuuu CCI Cancel Error Reason Program CADSCANR received an error on a CAICCI Cancel request on behalf of the specified user Action This message is followed by a DC900528 message indicating the error encountered Attempt the transfer request again If the problem persists save all error information and contact Technical Support Chapter 5 DC Messages 273 DC Messages DC
283. son This is an error message from program CADSARUL The Archive Database Merge Utility encountered an invalid month date value in either the FROMDATE or TODATE parameters Month must be less than or equal to 12 Action Correct the input parameter and resubmit the job Date Invalid Day Greater Than 31 Reason This is an error message from program CADSARUL The Archive Database Merge Utility encountered an invalid day date value in either the FROMDATE or TODATE parameters Day must be less than or equal to 31 Action Correct the input parameter and resubmit the job Chapter 6 DCD Messages 441 DCD Messages DCD0142E DCD0143E DCD0144E Time Invalid Reason This is an error message from program CADSARUL The Archive Database Utility encountered a missing or invalid time in either the FROMDATE or TODATE parameters Action Correct the input parameter and resubmit the job Time Invalid Hours Greater Than 24 Reason This is an error message from program CADSARUL The Archive Database Merge Utility encountered an invalid hour time value in either the FROMDATE or TODATE parameters Hours must be less than or equal to 24 Action Correct the input parameter and resubmit the job Time Invalid Minutes Greater Than 59 Reason This is an error message from program CADSARUL The Archive Database Merge Utility encountered an invalid minutes time value in either the FROMDATE or TODATE parameters Minutes
284. son An error occurred when freeing the SPLTABLE or the SPLCMD control block Processing continues Action If this message displays frequently contact Technical Support lt xxxx gt Command not processed by CADDSPLZ xxxx is the CADDSPL ID SPLx or CADDUTIL ID UTIL Reason The previous command was not processed due to an error reported in the previous message Action See previous message CADDO13E explanation lt SPLx gt module lt modname gt at lt address gt lt action gt SPLx is the CADDSPL ID modname is the module or control block name address is the hexadecimal address action is found added created deleted Reason Informational message during CADDSPL initialization Action None Chapter 1 CADDSPL Messages 9 CADDSPL CADDO16E CADDO171 CADDO20I 10 Message Guide lt SPLx gt unable to load module lt modname gt RC lt rc gt SPLx is the CADDSPL ID modname is the module name to load rc is the hexadecimal return code Reason A permanent CADDSPL module was not loaded The load return code is indicated in the message Action Contact Technical Support lt SPLx gt unable to locate an empty SNT2 entry SPLx is the CADDSPL ID Reason All of the SNT2 entries are currently used This situation occurs mainly when 32 CADDSPL address spaces are running Action Check if you have reached the maximum of CADDSPL address spaces on your system If not contact Technical Support
285. sses the safe guards that normally prevent you from starting CADDSPL twice 34 Message Guide CADD100E CADD102E CADDSPL Unable to obtain CSA storage required in SP nnn nnn is the Subpool number associated with the requested storage Reason CADDSPL is unable to obtain storage This is a critical error and CADDSPL stops Action Make sure the region specified on the DD EXEC statement is large enough CADD101E SPLx Unable to allocate appended LDS SPLx is the CADDSPL ID Reason CADDSPL was not able to allocate an append LDS Messages CADD102E and CADD103E that follow give additional information Action Using the information in messages CADD102E and CADD103E correct the error and restart CADDSPL If the problem persists contact Technical Support SPLx LDSDSN Appended LDS Name SPLx is the CADDSPL ID Appended LDS Name is the dsname of the LDS in error Reason This message should be used in association with CADD103E for the problem determination Action See CADD103E Chapter 1 CADDSPL Messages 35 CADDSPL CADD103E CADD1071 CADD110I 36 Message Guide SPLx S99rc xxxxxxxx S99error yyyy S99info zzzz SPLx is the CADDSPL ID XXXXXXXX is the DYNALLOC return code yyyy is the hexadecimal value of the DYNALLOC error code zzzz is the hexadecimal value of the DYNALLOC info code Reason This message follows CADD101E and CADD103E Action See the IBM z OS MVS Authorized Assembler Services G
286. t Chapter 5 DC Messages 287 DC Messages DC900574 DC900575 DC900576 DC900577 288 Message Guide User uuuuuuuu Transfer Server is Signed Off Reason The CA Dispatch CAICCI Transfer Server task CADSKWIK has ended Action None Text XXXXXXXXXXXXXXXXXXXX Reason This text is associated with various CA Dispatch CAICCI Transfer Server messages Action None Feedback XXXXXXXXXXXXXXXXXXXX Reason This error information is associated with various CA Dispatch CAICCI Transfer Server messages Action None Origin Id XXXXXXXXXXXXXXXXXXX Reason CAICCI Origin ID associated with various CA Dispatch CAICCI Transfer Server messages Action None DC900580 DC900581 DC900582 DC900583 DC Messages CADSXCCI uuuuuuuu Read Err Max Record Length Exceeded Reason Program CADSXCCI received a record from the client that is greater that 256 bytes long Action The client file being uploaded is not supported for upload Upload a different file CADSXCCI uuuuuuuu Seq Err Sequence Error in Upload Data Block Reason Program CADSXCCI determined that it received an invalid data block from the client during an upload Action Re attempt the transfer request If the problem persists contact Technical Support CADSXCCI uuuuuuuu ClntErr XXXXXXXXXXXXXXXXXXXXXXXXX Reason Program CADSXCCI received an error from the client Action The message contains the error te
287. t the time of the abend Precedes message DC980601 which is issued by program CADSMBOO Action None MSG Data Base Error Module mmmmmmmm Reason An error occurred in the specified database program This message is followed by messages DC980612 through DC980614 Action Contact Technical Support Error Status Xxxx Reason This is an IDMS Error Status value from a database error Action None Chapter 5 DC Messages 395 DC Messages DC980613 DC980614 396 Message Guide Error Record XXXXXXXXXXXXXXXX Reason This is an IDMS database record from a database error Action None Error Set XXXXXXXXXXXXXXXX Reason This is an IDMS database set from a database error Action None DC980615 DC980616 DC980619 DC Messages xx File is Full Reason Indicates that the xx IDMS area is full Action If the file is maintained by a CA Dispatch database maintenance utility the utility must be executed to delete expired database records If the file is not maintained by a utility one of the database expansion utilities must be executed to enlarge the database area See the CA Dispatch Systems Programmer Guide for more information Reason Indicates that a recoverable error occurred for a data set The data set was placed on hold Action Check the CAILOG for any previously issued messages for additional information and take appropriate action If the problem persist
288. task or Shutdown in progress Reason The task start command is rejected due to the reason indicated in the message text Action None Chapter 1 CADDSPL Messages 55 CADDSPL CADD3131 CADD314W CADD315E 56 Message Guide SAPx taskid ended rc 000 xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The task is successfully finished Action None SAPx taskid ended rc nnn xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH nnn is the decimal return code Reason The task is unsuccessfully finished The return code specified in the message text indicates the reason Action None SAPx taskid abended SXXxxx X is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Xxxx is the hexadecimal abend code Reason The task is unsuccessfully finished The return code specified the reason This is an internal error Action Contact Technical Support CADDSPL CADD316I1 CADD317I1 CADD318I1 SAPx taskid cancelled X is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The task was cancelled by the SAPI main task due to a task cancel command Action None SAPX no current active SAPI task X is the SAPI suffix Reason All the SAPI tasks are stopped Action None SAPX shutdown in progress x is the SAPI suffix Reason The SAPI main tas
289. tatus value from a database error Action None Error Record xXXXXXXXXXXXXXXX Reason This is an IDMS database record from a database error Action None Error Set XXXXXXXXXXXXXXXX Reason This is an IDMS database set from a database error Action None Chapter 5 DC Messages 385 DC Messages DC980419 DC980420 DC980422 DC980423 386 Message Guide RPO Agent Foreground Task Has Ended Due to Error Reason A condition was encountered by RPI and it is terminating itself Action Enter VRDMU820 and release the bundle marked in error If the problem persists contact Technical Support RPO Agent Foreground Task Has Ended Reason As part of shutdown processing RPO Agent is terminating cleanly Action None RPO Agent Bundle Allocate Error RC cc Reason An error occurred while attempting to allocate a JES output data set for the bundle This message will be preceded by DC970020 and DC970022 messages Action Save all error information and contact Technical Support RPO Agent Bundle Open Error RC cc Reason An error occurred while attempting to open a JES output data set for the bundle Action Save all error information and contact Technical Support DC980424 DC980426 DC980427 DC Messages RPO Agent Maildrop Start Separator Error RC cc Reason An error occurred while attempting to write the Maildrop Start Separator Page to the bundle
290. ter and resubmit the job VIEW DELETE STARTING Reason This message is to inform you that the VIEW ARCH process has finished archiving MGGCLASS reports and the report delete portion of the process is starting Action None This message is informational only Chapter 6 DCD Messages 439 DCD Messages DCD0136E DCD0137E DCD0138E 440 Message Guide No TODATE Parm Encountered Reason This is an error message from program CADSARUL The Archive Database Merge Utility encountered a missing or invalid TODATE parameter Action Correct the input parameter and resubmit the job FROMDATE gt TODATE Reason This is an error message from program CADSARUL The Archive Database Merge Utility encountered a FROMDATE that is greater than the TODATE Action Correct the input parameter and resubmit the job Getmain Unsuccessful Process Ended Reason An attempt to obtain storage to perform the VIEW or VIEW ARCH process in programs CADSPSVW or CADSVIEW failed Action Increase the REGION size for the VIEW1 execute step in the CADSVIEW proc or PSVW1 execute step in the CADSPSVW proc DCD0139E DCDO140E DCDO141E DCD Messages LDSRPT RPT Name Does Not Match Reason An internal logic error has occurred The database record does not point to the correct report on the LDS data set Action Save all error information and contact Technical Support Date Invalid Month Greater Than 12 Rea
291. tes No reports are displayed but the records still exist Action When you run the batch job DSEXPSAR or DSEXTMIG the report will be deleted from the archive definition DC900236 DC900237 DC900238 DCc900239 DC Messages USER PROFILE EXECUTED Reason The user profile created for this report was executed before the report was presented on the terminal Action This message is informational only DEFAULT PROFILE EXECUTED Reason The default profile created for this report was executed before the report was presented on the terminal Action This message is informational only NO COMMANDS ENTERED DURING PROFILE SESSION NOTHING SAVED Reason An SPRO command and an EPRO command were issued but no Online Viewing commands were entered during the profile session to build a profile Action Issue the SPRO command then issue Online Viewing commands Save them with the EPRO command NO SAVED PROFILE TO DELETE Reason A DPRO command was issued but no profile was stored on the Online Viewing database to delete Action This message is informational only Chapter 5 DC Messages 217 DC Messages DCc900240 Dc900241 DCc900242 DCc900243 218 Message Guide USER PROFILE SESSION STARTED Reason An SPRO command was entered All commands subsequently entered will be recorded in a named profile that will be saved when you enter the EPRO command Action This message is informational o
292. the DD card and rerun the job CADD922E CADD923E CADD924E CADDSPL RPL Error on lt LDSROOTx gt LDSROOTx is the ddname of the Root LDS in the read process Reason This is an internal error during the read process of the LDSROOTx file Action Contact Technical Support Logical Physical Error for lt LDSROOTx gt FDBK lt XXXXXXXX gt LDSROOTx is the ddname of the Root LDS in the read process XXXXXXXX is the feedback value of the VSAM GET function in hexadecimal format Reason Either a Logical or Physical error occurred during the read process of the LDSROOYx file Action See the IBM z OS DFSMS Macro Instructions for Data Sets for an explanation of the Feedback code correct the error and rerun the job SMS VSAM is not active Reason During a read process the MVS system has determined the SMS component has not been started Action Check your last IPL process to determine the reason for this situation correct it and rerun the job Chapter 1 CADDSPL Messages 137 CADDSPL CADD925W CADD926I CADD926I CADD9271 CADD927I 138 Message Guide lt LDSxxxx gt not correctly opened rc lt XXxx gt LDSxxxx is the ddname of the DD card in the Open process It can be LDSPARM LDSPRT LDSLIST or LDSDUMP XXXX is the return code of the Open function in hexadecimal value Reason An error occurred during the open process of the referenced file The Open return code gives more inform
293. the range Action Check your input to see if you entered the transaction correctly SECOND PART OF A RANGE MISSING WITHIN STATEMENT nnnnnnnnnnnnnnnn TRANS REJECTED Reason You input the first part of a date range in a transaction but CA Dispatch cannot find the second part of the range Action Check your input to see if you included the second part of the range Also check your input to see if you entered the correct delimiters SECOND PART OF A RANGE MISSING WITHIN STATEMENT nnnnnnnnnnnnnnn TRANS REJECTED Reason You input the second part of a date range in a transaction but CA Dispatch cannot find the first part of the range Action Check your input to see if you included the second part of the range Also check your input to see if you entered the correct delimiters Chapter 6 DCD Messages 419 DCD Messages DCDO0032 DCDO034E 420 Message Guide UNPAIRED QUOTE WITHIN STATEMENT nnnnnnnnnnnnnnnn TRANS REJECTED Reason You used a quote in a statement but forgot to include the closing quote Action Correct your input and resubmit the transaction IDMS DATA BASE ERROR RECORD BYPASSED CAI SHOULD BE NOTIFIED Reason An CA IDMS database error occurred Symptom Error messages are displayed by a batch report Action The following Error Status codes may occur when running a batch maintenance job ERROR STATUS 0229 0269 0329 0369 0829 0869 These errors can occur when running t
294. the task ID value and resend the command SPLx SPLTABL not found SPLx is the CADDSPL ID Reason Responding to the STAT command CADDSPL did not find the SPLTABL Action This is an internal error Take a system dump recycle CADDSPL and contact Technical Support Chapter 1 CADDSPL Messages 15 CADDSPL CADDO34I CADDO35I 16 Message Guide MAXDS limit reached output will be diverted to the JES spool Reason Informational The user defined MAXDS Maximum Data sets linear data set initialization parameter value has been exceeded Action There are several options available to regain report entry SPLHDR2 space They include m Manually delete report entries SPLHDR2 from CA Dispatch Online Viewing m Execute the Online View Purge utility to automatically delete Online Viewing reports that have exceeded their retention m Perform an Online Viewing Unload DSEXULD DSEXULDL reinitialize the linear data sets specifying a larger MAXDS parameter value and perform an Online Viewing Reload DSEXRLD For specific information regarding the execution of these utilities see the Systems Programmer Guide m Execute DSEXOVUL to initialize the OV database reinitialize the linear data sets specifying a larger MAXDS and execute DSEXBDE DSEXBDEL to restore Online Viewing reports from Archive For specific information regarding the execution of these utilities see the Systems Programmer Guide Note This option is only valid
295. tion task Action Access screen VSGMI100 and define all CA Dispatch Sysgen information Chapter 5 DC Messages 315 DC Messages DC970039 DC970040 DC970041 DC970042 316 Message Guide SG ARCTL Record Not Found Module CADSINIT Reason The CA Dispatch Sysgen control record for Archive was not found by the CA Dispatch initialization task Action Access screen VSGMI100 and define all CA Dispatch Sysgen information Main Region Vector Program pppppppp Not Found Reason A program specified in the CA Dispatch Program Vector Table could not be loaded Action Save the program name and contact Technical Support Main Region Initialization Complete Genlevel yymm ServicePack nn Reason The CA Dispatch startup process is successfully completed Action None Data Base Error Module pppppppp Reason An error occurred in the specified database program This message is followed by messages DC970043 through DC970045 Action Contact Technical Support DC970043 DC970044 DC970045 DC970046 DC Messages Error Status xxxx Reason This is an IDMS Error Status value from a database error Action None Error Record XXXXXXXXXXXXXXXX Reason This is an IDMS database record from a database error Action None Error Set XXXXXXXXXXXXXXXX Reason This is an IDMS database set from a database error Action None Aborting Startup Unable to Allocate CA
296. to be done Yes or No Reason This is part of the informational response to the F SPLx STAT X command Action None SPLx Purge aaaaaa bbbbb Wait time nnnnnnnn x is the CADDSPL ID aaaaaa specifies whether a purge will be done by the requestor Synch or by CADDSPL Asynch bbbbb specifies whether a purge will erase the data in the data space Clean or just free the pages Quick nnnnnnnon is the wait time value in minutes between two consecutive scans for a purge This value is used only when purges are done by CADDSPL Reason This is part of the informational response to the F SPLx STAT X command Action None 86 Message Guide CADD5241I CADD525I CADD526I CADDSPL SPLx Lock Number hnnnnnnnn Wait time 00000000 xX is the CADDSPL ID nnnnnnnn is the number of retries needed to get a lock before CADDSPL waits oo000000 is the wait time in hundredths of a second Reason This is part of the informational response to the F SPLx STAT X command Action None SPLx Util 1stlimit nnn 2nd limit 000 x is the CADDSPL ID nnn is the first warning threshold used to prevent a full spool condition This value is a percentage of the total data spaces size ooo is the second warning threshold used to prevent a full spool condition This value is a percentage of the total data spaces size Reason This is part of the informational response to the F SPLx STAT X command Action None SPLx
297. tted file Action Check your DD statement Chapter 1 CADDSPL Messages 101 CADDSPL CADD636E CADD637W CADD638E CADD639E 102 Message Guide UTIL Can not locate control block CADDSNT Reason Module CADDSNT can not be located in the LPA Action Be sure that the CAS9 proc was run with the CA Dispatch DSINIT initialization module If the problem persists contact Technical Support UTIL Can not find SPLSNT2 for ID x Reason The SPLSNT2 entry for CADDSPLx cannot be found in the CADDSNT table Action This is a normal situation if the CADDSPLx environment has not been started or if the entry was reused for another environment If the problem persists contact Technical Support UTIL VSAM file ddname is not a new LDS file Reason During the format process CADDUTIL detected the ddname DD statement does not refer to a valid new LDS file Action Check your DD statement and verify it addresses a newly initialized LDS file UTIL VSAM file ddname is not a LDS file Reason During the Open process CADDUTIL detected the ddname DD statement does not refer to a valid LDS file Action Check your DD statement CADD640E CADD641S CADD642I CADD6431 CADDSPL UTIL Missing previous ROOT command Missing VSArea Not a Root LDS Reason The previous ROOT command is missing Missing VSArea or it addresses an invalid file not a Root LDS Action Check the previous ROOT command UTIL
298. ttempted to update an entry displayed in a Report Input Display Facility queue When attempting to perform this function Dispatch determined the RIDF entry no longer exists because the report has been deleted from the LDS Action Press Enter for to cause CA Dispatch to redisplay the RIDF queue Token Control Block not Found Reason This message appears in the CA Dispatch log when a terminal user is displaying report names CA Dispatch is unable to match a job token ID with an entry in an internal list of job tokens prepared by the RPI function Action System operation continues If this message re appears recycle CA Dispatch If the message continues to appear contact Technical Support Chapter 5 DC Messages 253 DC Messages DC900428 DC900429 DC900430 254 Message Guide Entry Deleted by Another User Press PF2 Reason A user attempted to perform an extended display of an entry displayed in a Report Input Display Facility queue When attempting to perform this function CA Dispatch determined that the RIDF entry no longer exists because the report has been deleted from the LDS Action Press PF2 for CA Dispatch to redisplay the RIDF queue Bundle Deleted by Another User Press PF2 Reason A user attempted to perform an extended display from the Active Bundle Detail Status Screen When attempting to perform this function CA Dispatch determined that the bundle no longer exists because it has been deleted
299. type ttttttt with name rrrrrrrr cannot be loaded into the bundle Action The bundle will continue to print This message is preceded by another error message Reference that error message to determine the problem Error Allocating AFP Resource Library Reason An error occurred attempting to allocate an AFP Resource library This message is preceded by a DC970033 message Action See if you can browse the AFP Resource Library online If you can save all error information and contact Technical Support Error Opening AFP Resource Library Reason An error occurred attempting to open an AFP Resource library Action See if you can browse the AFP Resource Library online If possible save all error information and contact Technical Support Error Reading AFP Resource Library Reason An error occurred attempting to read an AFP Resource library Action See if you can browse the AFP Resource Library online If possible save all error information and contact Technical Support Chapter 5 DC Messages 391 DC Messages DC980452 DC980453 DC980454 DC980455 392 Message Guide Error Closing AFP Resource Library Reason An error occurred attempting to close an AFP Resource Library Action See if you can browse the AFP Resource Library online If possible save all error information and contact Technical Support Error Deallocating AFP Resource Library Reason An error occurred attempting to
300. u Timeout Occurred During Abort Process Reason During abort processing the CA Dispatch CAICCI Transfer Server did not receive a response from the client in the required amount of time Action The session is disconnected Check previously issued messages to find the reason for the abort Re attempt the transfer request If the problem persists save all error information and contact Technical Support DC900554 DC900555 DC900556 DC900557 DC Messages User uuuuuuuu Lost Session with Client Reason The CA Dispatch CAICCI Transfer Server has lost its connection with the client Action Re attempt the transfer request If the problem persists save all error information and contact Technical Support User uuuuuuuu Logic Error Multiple Matches Reason The specified user is attempting to initiate a PC transfer but is already transferring under multiple sessions This is an internal logic error Action Contact Technical Support User uuuuuuuu User is Already Using Report Transfer Reason The specified user is attempting to initiate a PC transfer but is already transferring under another session Action None User uuuuuuuu Session Ended Duplicate Signon Reason The specified user is attempted to initiate a PC transfer but is already transferring under another session Action None Chapter 5 DC Messages 281 DC Messages DC900558 DC900559 DC900560 282 Message G
301. ubmit job Time Invalid Hours Greater Than 24 Reason This error message from program CADSBLDE notifies you that the Batch Extract Request Utility encountered an invalid hour time value in either the FROMDATE or TODATE parameters Hours must be less than or equal to 24 Action Correct the input parameter then resubmit job Time Invalid Minutes Greater Than 59 Reason This error message from program CADSBLDE notifies you that the Batch Extract Request Utility encountered an invalid minutes time value in either the FROMDATE or TODATE parameters Minutes must be less than or equal to 59 Action Correct the input parameter then resubmit job DCD0133E DCD0134E DCD0135E DCDO135I1 DCD Messages Invalid Recipient name with TYPE R Reason This error message from program CADSBLDE notifies you that the Batch Extract Request Utility encountered a missing RECIPIENT value when specifying TYPE R extract request Action Correct the input parameter then resubmit job Invalid Execution Parameters Reason This is an error message from program CADSARUL The Archive Database Merge Utility encountered no valid execution parameters Action Supply valid input parameters and resubmit the job No FROMDATE Parm Encountered Reason This is an error message from program CADSARUL The Archive Database Merge Utility encountered a missing or invalid FROMDATE parameter Action Correct the input parame
302. uide User uuuuuuuu Transfer Server is Signed On Reason The CA Dispatch CAICCI Transfer Server for the specified user is successfully started Action None User uuuuuuuu Error Message Received from Client Reason The CA Dispatch CAICCI Transfer Server received an error from the PC Action This message is followed by a DC900575 message indicating the error encountered Re attempt the transfer request If the problem persists save all error information and contact Technical Support User uuuuuuuu Server Ending Due to Error Reason The CA Dispatch CAICCI Transfer Server is ending due to an error condition Action This message is followed by the DC900576 and DC900577 messages See earlier written messages to determine the reason for the error condition Re attempt the transfer request If the problem persists save all error information and contact Technical Support DC900561 DC900562 DC Messages User uuuuuuuu Invalid Message from Client Reason The CA Dispatch CAICCI Transfer Server received an invalid message from the client Action This message is followed by the DC900575 message that contains the invalid message Re attempt the transfer request If the problem persists save all error information and contact Technical Support User uuuuuuuu Cannot Find Router Connect Storage Reason The CA Dispatch CAICCI Transfer Server cannot find the common communication storage for th
303. uide for the meaning of the error code and info code with Dynamic Allocation and take appropriate action SPLx creating CADZSPLX Address Space SPLx is the CADDSPL ID CADZSPLx is the CADDSPL main address space Reason The CADDSPLI program is creating the main CADDSPL address space Action None SPLx Origin Input command SPLx is the CADDSPL ID Origin is the operator or SPLCMD Input command is the input command to process Reason CADDSPL is about to process a given command This message can be issued by the Operator console or from the SPLCMD DD statement Action None CADD112E CADD113W CADD114I CADDSPL SPLX Shutdown initiated Corrupted Sorted DS Recycle nnn Splx is the CADDSPL ID nnn is IDX or blank Reason An error was discovered in the sorted data space Action Recycle your CADDSPL as soon as possible SPLX started with the FORCE operand SPLx is the CADDSPL ID Reason CADDSPL was started though the CADDSNT indicates it is already active The FORCE operand permits a restart of the CADDSPL when the cleanup of the previous run failed Action Verify that the previous run ended before issuing the FORCE operand Note Starting the CADDSPL twice can lead to unpredictable results and the FORCE option bypasses the safe guards that normally prevent you from starting CADDSPL twice SPLx SAPI Environment reset SPLx is the CADDSPL ID Reason This message is the result of the RESET
304. untered Re attempt the transfer request If the problem persists save all error information and contact Technical Support User uuuuuuuu CCI Converse Error Reason The CA Dispatch CAICCI Transfer Server received an error on a CAICCI Converse request on behalf of the specified user Action This message is followed by a DC900572 message indicating the error encountered Re attempt the transfer request If the problem persists save all error information and contact Technical Support DC900571 DC900572 DC900573 DC Messages User uuuuuuuu CCI Term Error Reason The CA Dispatch CAICCI Transfer Server received an error on a CAICCI Term request on behalf of the specified user Action This message is followed by a DC900572 message indicating the error encountered Re attempt the transfer request If the problem persists save all error information and contact Technical Support Error XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Reason The CA Dispatch CAICCI Transfer Server received a CAICCI error This message contains the error text Action None User uuuuuuuu Transfer Server is Abending Reason The CA Dispatch CAICCI Transfer Server task CADSKWIK is abnormally terminating for the specified user Action If this occurs during shutdown processing it is a NORMAL situation If not a shutdown re attempt the transfer request If the problem persists save all error information and contact Technical Suppor
305. urn code hhhh indicates the error code of the function Action Verify the DD statement named ddname is related to a LDS file If needed contact Technical Support UTIL Feedback on Get Put for ddname FDBK hhhhhhhh Reason The CADDUTIL utility received a feedback code for the given operation when processing the LDS named ddname The hexadecimal return code hhhhhhhh specifies the feedback code of the function Action None Chapter 1 CADDSPL Messages 95 CADDSPL CADD616E CADD617E CADD618E 96 Message Guide UTIL Logical Physical Error on Get Put for ddname FDBK hhhhhhhh Reason The CADDUTIL utility received an error logical or physical for the given operation when processing the LDS named ddname The hexadecimal code hhhhhhhh specifies the feedback code of the function Action Verify that the DD statement named ddname is related to a LDS file If needed contact Technical Support UTIL RPL Error for ddname Reason The CADDUTIL utility received a RPL error during a Get or Put operation Action Verify the DD statement named ddname is related to a LDS file If needed contact Technical Support UTIL SMS VSAM is not active Reason The CADDUTIL utility received an error during a Get or Put operation indicating the VSAM component of the SMS is not active Action Verify the SMS management on your site is correct If needed contact Technical Support CADD619E CADD620I CADD
306. use of the failure m If the problem can be fixed enter the BSTORE task at the CA Dispatch Enter Next Task Code prompt to retry the bundle recovery If the problem persists contact Technical Support Bundle Structure Backup Starting Reason The CA Dispatch bundle recovery program has started determining if a backup is needed Action None represents one of the following messages Bundle Structure Backup Successful Reason The bundle recovery program has successfully finished backing up the bundle structures Action None DC970063 DC Messages Bundle Structure Backup Bypassed Reason The Bundle Recovery program found that there were no bundle structures to back up Action None Bundle Structure Backup Failed Reason The bundle recovery program encountered an error that prevented the bundle structures from being backed up Action This message will be preceded by messages indicating the actual cause of the failure No bundle recovery data set exists the bundle recovery program will restore from CADDSPL upon startup m Start the RPI subtasks after CA Dispatch startup to rebuild the original bundles with new bundle IDs If the problem persists contact Technical Support Bundle Control File xxxxxx Allocation Error Reason The bundle recovery program could not allocate the bundle control file for input or output processing Action m Review the error message s from the dynamic
307. ved an error when accessing the data space control block for a given JES data set Messages CADD3601I CADD361 and CADD362I which follow the current message or the previous CADD330 message give more information about the JES data set This is an internal error Action Contact Technical Support Chapter 1 CADDSPL Messages 67 CADDSPL CADD348S CADD349S SAPx taskid Getmain Error for Compressed Buffer rc nnn x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH nnn is the decimal return code Reason The SAPI task received an error during a getmain process for a given JES data set The return code indicates the source of the error The processing of the current file is interrupted Messages CADD360 CADD361I and CADD362I which follow the current message or the previous CADD330 message give more information about the JES data set Action Review messages CADD3601I CADD361 and CADD3621 to determine where the error occurred and contact Technical Support SAPx taskid Freemain Error for Compressed Buffer rc nnn x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH nnn is the decimal return code Reason The SAPI task received an error during the freemain process for a given JES data set The return code indicates the source of the error Messages CADD360I CADD3611I and CADD362I which follow the current message or the previous CADD330I message give more info
308. when writing a block in the data space for a given JES data set Messages CADD360 CADD361 and CADD362I which follow the current message or the previous CADD330 message give more information about the JES data set The process is placed on standby Action The LDS full condition can be reset either by cleaning the LDS or adding a new append LDS Daily process manual deletes and or archiving can be used to clean the LDS These operations can be run with the SAPI task on standby When the LDS full condition is reset the SAPI task will automatically resume the process In the event that a new append must be added the CADDSPL must be stopped Either the Stop IMMED command for the SAPI task followed by a Close command or a direct Close MMED command can be used When CADDSPL is down run the CADDUTIL utility to add the new append LDS and restart the CADDSPL The SAPI task will resume the interrupted process CADD346S CADD347S CADDSPL SAPx taskid CADZSPLi not available Process interrupted x is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH Reason The SAPI task that detected the CADZSPLi address space stopped or abended The task is interrupted Action Restart CADDSPLi and restart the SAPI task SAPx taskid Get Blocks Error rc nnnn for xX is the SAPI suffix taskid is the SAPI task ID RPI1 RPI2 RPI3 MSG or ARCH nnnn is the decimal return code Reason The SAPI task recei
309. xamine the JCL for External Archive and correct the specification for the SYSCTL and CAICTL DD statements Chapter 5 DC Messages 357 DC Messages DC980030 DC980031 DC980032 358 Message Guide EXTERNAL ARCHIVE FOREGROUND HAS ABENDED Reason The background portion of Archive has abended while running in external mode Action Retain the OS dump produced for this abend and the CV log for this portion of time Contact Technical Support EXTERNAL EXTRACT IS NOT REQUESTED EXECUTION IS ENDED Reason The job that runs External Extract has begun execution but it cannot find a request for external extract to run It will end One possible reason for this is that an E EXTR was issued Action External Extract is a job that runs separately from CA Dispatch Its execution is not totally under the control of CA Dispatch Investigate the execution of this job compared to the commands issued online to CA Dispatch EXTERNAL EXTRACT IS ALREADY ACTIVE EXECUTION IS ENDED Reason The job that runs external extract has begun execution and another copy of external extract is already executing It will end One possible reason for this is that an S EXTR XT was issued twice Action External Extract is a job that runs separately from CA Dispatch Its execution is not totally under the control of CA Dispatch Investigate the execution of this job compared to the commands issued online to CA Dispatch DC980033 DC980034
310. xt from the PC Re attempt the transfer request If the problem persists save all error information and contact Technical Support CADSXCCI uuuuuuuu Server xxxxxxxx Offline Reason Program CADSXCCI is indicating that the specified user with the specified Origin ID is ending the transfer Action None Chapter 5 DC Messages 289 DC Messages DC900584 DC900585 290 Message Guide CADSXCCI uuuuuuuu Invalid Message Received Reason Program CADSXCCI received an invalid message from the client Action This message is followed by the error message text that contains the invalid message Re attempt the transfer request If the problem persists save all error information and contact Technical Support represents one of the following messages CADSXCCI uuuuuuuu Recv Err XXXXXXXXXXXXXXXXXXXXXXXXXXX or CADSXCCI uuuuuuuu Send Err XXXXXXXXXXXXXXXXXXXXXXXXXXX or CADSXCCI uuuuuuuu Conv Err XXXXXXXXXXXXXXXXXXXXXXXXXXX or CADSXCCI uuuuuuuu Open Err XXXXXXXXXXXXXXXXXXXXXXXXXXX or CADSXCCI uuuuuuuu Write Err XXXXXXXXXXXXXXXXXXXXXXXXXXX or CADSXCCI uuuuuuuu INDSFILE Failed ErrXXXXXXXXXXXXXXXXXXXXXXXX Reason Program CADSXCCI encountered a CAICCI error during the transfer Action This message displays the CAICCI error message text that contains the error Try the transfer request again If the problem persists save all error information and contact Technical Support DC900586 DC900587 DC Messages re
311. yy SPLn is the CADDSPL Identification XXXXXXXX is the return code from the encryption module yyyyy is the reason code from the encryption module Reason This message indicates the CADDSPL data encryption process encountered a problem and halted Action Analyze the return and reason codes correct the problem and restart CADDSPL SPLx CADDSPL procedure name must be 8 characters SPLx is the CADDSPL ID Reason The CADDSPL procedure name does not meet the CA Dispatch r11 requirements Action Rename the CADDSPL procedure SPLx Unsupported release level of XXX SPLx is the CADDSPL ID XXX is MVS or JES Reason Your MVS or JES system does not meet the CA Dispatch r11 requirements Action Upgrade your MVS or JES system Chapter 1 CADDSPL Messages 23 CADDSPL CADDO631 CADDO65I 24 Message Guide SPLX ORDER criteria Current Next SPLx is the CADDSPL ID criteria specifies up to 6 criteria Reason This informational message displays the criteria used to internally sort the reports in the data spaces The words Current and Next are added when the order criteria will change during the next recycle When this condition occurs two CADDO63I messages display the order of the current field and the order of the next one Action None SPLx SPLHDR4 nnnn was LOCKed changed to UNLK SPLx is the CADDSPL ID nnnn is the RBA of the SPLHDR4 block Reason During its initialization CADDSPL found a

CA Dispatch Message Guide - support CA

Contents

Download Pdf Manuals

Related Search

Related Contents