User Manual - Alcom Electronics Pte Ltd
Contents
1. Oe MBP10_IFU_LEN fm Page 1 Friday August 28 2009 10 59 AM PN OTs ha a oe AA MOTOROLA USER S GUIDE MBP10 DIGITAL BABY MONITOR The features described in this user s guide are subject to Table of contents modifications without prior notice Using the MBP 10 suaciriesirerndnnnaintanaararnidaesan denan nanana nsara 3 1 Volume adjustment on the Parent unit cee eeceeeeeeeeeeees Disposal Cleaning of the device environment ccccesseseeeeesssseeeeees Welcome to your new Motorola Digital Baby Monitor Thank you for purchasing the MBP10 This baby monitor uses digital communication which ensures that you can hear your baby clearly without any distracting noise or interference Please retain your original dated sales receipt for your records For warranty service of your Motorola product you will need to provide a copy of your dated sales receipt to confirm warranty status Registration is not required for warranty coverage For product related questions please call 0845 218 0890 in the UK 65 68412668 in Singapore On the Web www motorola com This User s Guide provides you wi get the most from your produc Before you can use the bak charge the battery on the Instructions in section units Got everything e 1x Parent unit e 1x Baby unit e 2 x AAA Recha e 1x P2. but if you try to adjust beyond the maximum or minimum levels it will output a double beep The sound detected such as baby s cries is indicated by the volume indicator LEDs on the front of the unit even if the volume is set OFF 4 Disposal of the device environment At the end of the product lifecycle you should not dispose of this product with normal household waste but take the product to a collection point for the recycling of electrical and electronic equipment The symbol on the product User s Guide and or box indicates this E Some of the product materials can be re used if you take them to a recycling point By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment Please contact your local authorities in case you need more information on the collection points in your area Dispose of the batteries in an environmentally friendly manner according to your local regulations 5 Cleaning Clean the MBP10 with a slightly damp cloth or with an anti static cloth Never use cleaning agents or abrasive solvents Cleaning and care e Do not clean any part of the product with thinners or other solvents and chemicals this may cause permanent damage to the product which is not covered by the warranty When necessary clean it with a damp cloth Keep your MBP10 away from hot humid areas or strong sunlight and do not let it get wet Every effo
3. TO USE THE PRODUCTS OR ACCESSORIES AND BINATONE ELECTRONICS INTERNATIONAL LTD SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR ANY CLAIMS OR DEMANDS MADE BY ANY THIRD PARTY OR MADE BY YOU ON BEHALF OF ANY THIRD PARTY TO THE FULL EXTENT THESE DAMAGES OR CLAIMS MAY BE DISCLAIMED BY LAW Some states countries or jurisdictions do not allow the limitation or exclusion of incidental or consequential damages or limitation on the length of an implied warranty so the above limitations or exclusions may not apply to you in such states countries or jurisdictions This warranty gives you specific legal rights and you may also have other rights that vary from state to state or from one country jurisdiction to another Products or Accessories Covered Length of Coverage Consumer Products One 1 year from the date of purchase by the first consumer purchaser of the product Consumer Accessories Ninety 90 days from the date of purchase by the first consumer purchaser of the accessory Consumer Products and The balance of the original warranty or Accessories that are Repaired or __ for ninety 90 days from the date Replaced returned to the consumer whichever is longer Exclusions Normal Wear and Tear Periodic maintenance repair and replacement of parts due to normal wear and tear are excluded from coverage Batteries Only batteries whose fully charged capacity falls below 80 of their rated capacity and batteries that leak are covered by this l
4. emits a warning beep every 3 seconds and the green link LED on the parent unit will flash Move the parent unit closer until the link is re established 2 5 Registration The baby monitor is already pre registered upon your purchase You do not need to re register it again unless the baby unit loses its link with the parent unit To re register your baby monitor follow the procedure below Switch off the mains power by removing the power supply for both the baby and parent units and remove a battery from the parent unit Press and hold RS for 3 seconds while the baby unit mains power is switched back on The baby unit is in registration mode Press and hold while the parent unit mains power is switched back on and keep holding it down until the red sound LEDs flash The parent unit is in registration mode 4 Wait for the 2 units to search and establish the link When the registration is complete the LEDs stop flashing and the parent unit emits a long beep 2 6 Paging If the parent unit is misplaced press and hold on the baby unit for 2 seconds The parent unit will emit a repeated beep tone for 30 seconds so that you can locate it Press any key on the parent unit or the again on the Baby unit to stop paging 3 Using the MBP10 3 1 Volume adjustment on the Parent unit There are 5 volume levels on the parent unit e Press A to increase the volume level e Press VW to decrease the volume level OR INABILITY
5. What Other Limitations Are There ANY IMPLIED WARRANTIES OR CONDITIONS IRRESPECTIVE OF WHETHER THEY ARE IMPOSED BY LAW OR OTHERWISE INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY OTHERWISE THE REPAIR REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER AND IS PROVIDED IN LIEU OF ALL WARRANTIES AND MOTOROLA AND BINATONE ELECTRONICS INTERNATIONAL LTD MAKES NO OTHER WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED IN NO EVENT SHALL MOTOROLA OR BINATONE ELECTRONICS INTERNATIONAL LTD BE LIABLE WHETHER UNDER THIS LIMITED WARRANTY OR IN CONTRACT OR TORT INCLUDING NEGLIGENCE OR STRICT PRODUCT LIABILITY OR OTHERWISE FOR DAMAGES OR CLAIMS IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY OR FOR ANY INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR LOSS OF REVENUE SAVINGS OR PROFITS LOSS OF BUSINESS LOSS OF PROGRAMS DATA INFORMATION WHETHER CONFIDENTIAL PROPRIETARY OR PERSONAL IN NATURE OR OTHERWISE OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY The detected sound level is indicated by the LEDs on the front of the parent unit When the connection is established move the parent unit to the room you want to monitor from but within the operational range When there is no connection or out of range the parent unit
6. contacts with sharp or metal objects CAUTION Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions Overview of your Parent unit 2 1 NOTE 2 2 2 Getting started Baby unit power supply Parent unit battery installation It clip attery co Battery cove Link indicator LED Volume down button Power On Off button Speaker Volume up button Power ON DJ LED Volume indicator LEDs Power adapter connector 1 Connect the small plug of the power adapter to the power connector on the baby unit and the other end of the adapter to the mains socket 230V 50HZ Only use the enclosed power adapter 6V DC 300mA 2 Press at The Power LED will illuminate 3 Press and hold CR to switch off the baby unit The Parent unit can be used with either rechargeable batteries 2 AAA size Ni MH type supplied or from the mains power via the power adapter supplied Overview of your Baby unit S Power LED Power On Off button Microphone Paging button Power adapter connector WARNING Never use ordinary non rechargeable batteries The power mains adapter provides a charging function and non rechargeable batteries may burst an
7. d cause damage NOTE The Ni MH rechargeable batteries must be charged for 15 hours before using the Parent unit without the mains power We recommend the rechargeable batteries are installed so that the unit continues to work in the event of a mains power failure 1 Using a screwdriver turn the screw of the battery cover on the back of the parent unit 90 degrees in a counterclockwise direction Remove the battery cover NOTE Rotate the belt clip to its hanging position to make it easier to access the battery compartment Do not try to turn the screw further than the OPEN position marked on the cover 2 Install 2 AAA size Ni MH rechargeable batteries with the polarity as shown in the diagram above and by the and markings in the battery compartment 3 Close the battery compartment and turn the screw 90 degrees back in a clockwise direction 4 Press The Power ON 48 LED will illuminate green if it only has battery power 5 Press and hold to switch off the parent unit NOTE When the battery level is low the green power LED will flash and the parent unit will emit a warning beep once every minute If the baby unit loses power or goes out of range the link will be lost and the parent unit will emit a warning beep every 3 seconds and the green link LED on the parent unit will continue to flash WARNING Do not mix old batteries with new ones Keep batteries away from small children Do not shor
8. d in the United Kingdom and Singapore What Does this Warranty Cover Subject to the exclusions and limitations contained below Binatone Electronics International LTD warrants the Motorola branded consumer products that it manufactures Products and the Motorola branded or certified accessories sold for use with these Products that it manufactures Accessories to be free from defects in materials and workmanship under normal consumer usage for the period s outlined below This limited warranty is a consumer s exclusive remedy and only applies as follows to new Motorola branded Products and Accessories manufactured by Binatone Electronics International LTD and purchased by consumers in the United Kingdom and Singapore which are accompanied by this written warranty Who is covered This warranty covers only the first consumer purchaser and is not transferable What will BINATONE ELECTRONICS INTERNATIONAL LTD do BINATONE ELECTRONICS INTERNATIONAL LTD at its sole option will at no charge repair replace or refund the purchase price of any Products or Accessories that does not conform to this warranty Binatone Electronics International LTD may use functionally equivalent reconditioned refurbished pre owned or new Products Accessories or parts in such repair or replacement and any Products Accessories or parts removed or being replaced under this warranty become the property of Binatone Electronics International LTD
9. imited warranty Battery life and the changes in battery capacity with time or use are excluded from this warranty Abuse amp Misuse Defects or damage that result from a improper or unreasonable use operation storage misuse or abuse accident or neglect or other external cause such as physical damage cracks scratches etc to the surface of the product resulting from misuse b your failure to follow or operate outside the usage parameters stated in the user instructions that came with the Products or Accessories c contact with liquid water rain extreme humidity or heavy perspiration sand dirt or the like extreme heat or food d use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions or e other acts or omissions which are not the fault or neglect of Motorola or Binatone Electronics International LTD are excluded from coverage Use of Non Motorola branded Products and Accessories Defects or damage that result from the use of Non Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage Unauthorised Service or Modification Defects or damages resulting from service testing adjustment installation maintenance alteration or modification in NOTE If the volume level is turned down to its minimum level it will be OFF When you press A or a beep is played at the volume level currently set
10. l protection requirements of R amp TTE Directive 1999 5 EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters the Council Directive 2004 108 EC on the approximation of the laws of the Member States relating to electromagnetic compatibility EMC and the European Community Directive 2006 95 EC relating to Electrical Safety Assessment of compliance of the product with the requirements relating to the essential requirements according to Article 3 R amp TTE was based on Annex III of the Directive 1999 5 EC and the following standard Radio Spectrum EN 301406 V1 5 1 2003 EMC EN 301489 1 V1 8 1 2008 EN 301489 6 V1 3 1 2008 Electrical Safety EN 60950 1 2006 The product is labelled with the European Approval Marking CE as show Any Unauthorized modification of the product voids this Declaration Manufacturer Importer Signature of authorized person gt j l London 15 Jun 2009 Signature Paul Tsui Product Operation Director Place amp Date Q MOTOROLA Manufactured distributed or sold by Binatone Electronics International LTD official licensee for this product MOTOROLA and the Stylized M Logo and other Motorola trademarks and trade dress are owned by Motorola Inc and are used under license from Motorola Inc MOTOROLA and the Stylized M Logo are registered in the US Patent amp Trademark Office All other product or service names are the property of their respective owners Moto
11. ower adap e 1x Power adapte 1 Safety Instructions WARNING This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is when handled as described in the User s Guide safe to use Therefore always read the instructions in this User s Guide carefully before using the device e Adult assembly is required Keep small parts away from children when assembling e This product is not a toy Do not allow children to play with it e This baby monitor is not a substitute for responsible adult supervision e Keep this User s Guide for future reference e Do not place the baby unit or cables in the cot or within arm s reach of the baby the unit should be at least 1 metre away e Keep the cords out of reach of children e Do not cover the baby monitor with a towel or blanket e Never use extension cords with power adapters Only use the power adapters provided e Test the baby monitor before use Become familiar with its functions e Do not use the baby monitor near water e Do not install the baby monitor near a heat source e Only use the chargers and power adapters provided Do not use other chargers or power adapters as this may damage the device and batteries e Only insert batteries of the same type Never use ordinary non rechargeable batteries in the parent unit Insert batteries with the right polarity indicated in the battery compartment e Do not touch the charger or plug
12. r address and telephone number These terms and conditions constitute the complete warranty agreement between you and BINATONE ELECTRONICS INTERNATIONAL LTD regarding the Products or Accessories purchased by you and supersede any prior agreement or representations including representations made in any literature publications or promotional materials issued by BINATONE ELECTRONICS INTERNATIONAL LTD or representations made by any agent employee or staff of BINATONE ELECTRONICS INTERNATIONAL LTD that may have been made in connection with the said purchase Technical Specifications Frequency range 1 88 to 1 9 GHz bandwidth 20 MHz Channel bandwidth1 728 MHz Operating range Extended range up to 950 feet Based on unobstructed line of sight Actual range will vary depending on surroundings Electrical power Parent and Baby units Input 100 240VAC 50 60Hz UK EU plug Output 6VDC 300 mA Supplier Kings Model KSS05 060 0300B KSS05 060 0300G Parent unit 2xAAA 600mAh Ni MH rechargeable batteries Supplier BYD Model H AAA600A Supplier GPI Model GN60AAAHC 6 Help Registration If the baby unit has lost its link with the parent unit Try recharging or replacing the batteries If the baby unit is too far away it may be going out of range so move the baby unit closer to the parent unit Reset the units by unplugging the units electrical power Wait for around 15 seconds and plug it back in again Allow
13. rola Inc 2009 All rights reserved Printed in China Version 1 0 PN D PS MZ is
14. rt has been made to ensure high standards of reliability for your MBP10 However if something does go wrong please do not try to repair it yourself contact Customer Service for assistance any way by someone other than Motorola Binatone Electronics International LTD or its authorised service centres are excluded from coverage Altered Products Products or Accessories with a serial numbers or date tags that have been removed altered or obliterated b broken seals or that show evidence of tampering c mismatched board serial numbers or d nonconforming or non Motorola branded housings or parts are excluded from coverage Communication Services Defects damages or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage How to Obtain Warranty Service or Other Information To obtain service or information please call 0845 218 0890 in the UK 65 68412668 in Singapore You will receive instructions on how to ship the Products or Accessories the shipment of which shall be at your own risk and expense to a BINATONE ELECTRONICS INTERNATIONAL LTD Authorised Repair Centre To obtain service you must include a a copy of your receipt bill of sale or other comparable proof of purchase of the Products or Accessories showing the date of purchase b a written description of the problem and most importantly c you
15. t circuit batteries or dispose of in fire Remove the batteries if this device is not going to be used for a long period of time lt 2 MRP10 H HIN ae Da ge H ida A g 2 3 Parent unit power supply 1 Connect the small plug of the power adapter to the power connector on the parent unit and the other end of the adapter to the mains socket 230V 50HZ NOTE Only use the enclosed adapter 6V DC 300mA 2 Press The Power ON D LED will illuminate red if it only has mains power It will illuminate orange if it has both the battery and mains power 3 Press and hold to switch off the parent unit 2 4 Link NOTE Do not place the baby unit or cables in the cot or within arm s reach of the baby the unit should be at least 1 metre away When using the baby monitor for the first time it is advised to test the connection Install the parent unit in the same room as the baby unit but make sure there is at least 1 metre between the 2 units When both units are switched on the parent unit will search for the baby unit The green link LED on the parent unit will flash until the parent unit is connected with the baby unit Once the link is established the LED will stop flashing The sound captured by the microphone on the baby unit will be audible on the parent unit provided the volume is not turned down to its OFF setting Consumer Products and Accessories purchase
16. up to one minute for the baby unit and the parent unit to synchronise See 2 5 Registration if there is a need to re register the units Interference Noise interference on your parent unit Your baby and parent units may be too close Move them further away from each other Make sure there is at least 1 metre between the 2 units to avoid feedback howling If the baby unit is too far away it may be going out of range so move the baby unit closer to the parent unit Make sure the baby and parent units are not near other electrical equipment such as a television computer or cordless mobile telephone 7 General Information If your product is not working properly Read this User s Guide or the Quick Start Guide Visit our website http Awww motorola com Contact Customer Service at 0845 218 0890 in the UK 65 68412668 in Singapore To order replacement batteries contact customer service or visit our website 12 BINATONE TELECOM PLC 1 Apsley Way London NW2 7HF United Kingdom Tel 44 0 20 8955 2700 Fax 44 0 20 8344 8877 e mail binatoneuk binatonetelecom co uk Binatone EC Declaration of Conformi We the manufacturer Importer Binatone Telecom Ple 1 Apsley Way London NW2 7HF United Kingdom Declare under our sole responsibility that the following product Type of equipment Digital Baby Monitor Model Name MBP 10 Country of Origin China Brand Motorola complies with the essentia
Download Pdf Manuals
Related Search